Post on 18-Dec-2021
MANDRELSCOLLET CHUCKSEDITION 8
3
Table of contents
MANDRELS I COLLET CHUCKS
Cartridge mandrelsKFS 7006MFS 7007KFR - without axial tightening 7016MFR - without axial tightening 7017KFB 7026MZB 7029MZE 7032
Segment clamping mandrelsABSIS 7040AGILIS 7045KFR-SE 7050MFR-SE 7051
Collet chucksCAPTIS-D 7060CAPTIS-A 7061CAPTIS-AF 7062CAPTIS-M 7064ABSIS-C 7071KZF 7073KZF-S 7074
Special solutions 7076
Errors and corrections are reserved!
7002
TYPE KFS/MFS KFR/MFR KFB MZB MZE ABSIS AGILIS KFR-SE
Cartridge mandrel Segment clamping mandrel
Feature
Stable
clamping, sui-
table for long
workpieces or
long clamping
lengths
Suitable for
short clam-
ping lengths
without a
defined axial
component
Stable
system with
high torque
transmission
for working
with small
Ø, for short
clamping
lengths
Stable
system with
high torque
transmission
for working
with small
Ø, for short
clamping
lengths
Cost-effective
system for
measuring
tasks, high
accuracy
High degree
of hardness
of the clam-
ping sleeve,
thereby wear
resistant, long
service life of
the clamping
sleeve
Stable
system with
high torque
transmission
for working
with small
Ø, for short
clamping
lengths, high
degree of
hardness of
the clamping
sleeve
Suitable
for short
clamping
lengths with
or without a
defined axial
component
Application
Turning,
grinding,
milling,
gear cutting,
balancing,
measuring
Turning,
grinding,
gear cutting,
balancing,
measuring
Turning,
grinding,
milling,
gear cutting,
balancing,
measuring
Turning,
grinding,
measuring
Measuring,
grinding
Turning, grinding,
milling, gear cutting,
balancing, measuring
Turning,
grinding,
milling,
gear cutting,
balancing,
measuring
Clamping Internal Internal Internal Internal Internal Internal Internal Internal
Actuation
Clamping surface
Smooth (optionally coated, serrated, toothed,
for shape clamping)Smooth
Smooth (optionally coated, serrated, toothed,
for shape clamping)
Axial component
Clamping range mm
15 - 140 14,5 - 131 5,5 - 29 5,5 - 78,7 8 - 230 20 - 106 10 -130 14,5 - 131
Workpiece stop possible
Preparation for air sensing
Take-up
Cylindrical take-up mount combined with
intermediate flange ISO 702-1 (DIN 55028)
Between points or cylindrical
take-ups, driving at the shaft
possible
Cylindrical take-up mount combined with
intermediate flange ISO 702-1 (DIN 55028)
Page 7006 / 7007 7016 / 7017 7026 7029 7032 7040 7045 7050
Mandrels and collet chucks
Orientation guide
Ori
enta
tion
gui
de
yes optional hand operated power operated
www.eshop.roehm.biz
7003
TYPE CAPTIS-D CAPTIS-A CAPTIS-AF CAPTIS-M ABSIS-C KZF KZF-S
Collet chucks
Feature
Full through-
hole, with
centering edge,
draw-down
Restricted
through-hole,
optional fixed
workpiece stop,
draw-down
Restricted
through-hole,
fixed workpiece
stop, stationary
collet: without
draw-down
For rotating and
stationary use,
manually ope-
rated, with axial
tension against
workpiece stop
Stable system,
for take-up into
CAPTIS clam-
ping system,
with draw-down
Bayonet quick
lock with pro-
tection against
torsion
Bayonet quick
lock, draw-
down, actuation
by clamping
mandrel
Application
Turning,
grinding, milling,
gear cutting,
balancing,
measuring
Turning,
grinding, milling,
gear cutting,
balancing,
measuring
Turning,
grinding, milling,
gear cutting,
balancing,
measuring
Stationary tur-
ning, grinding,
milling, drilling,
measuring
Turning,
grinding, mil-
ling, gear cut-
ting, balancing,
measuring
Turning,
grinding, milling,
measuring
Turning,
grinding, milling,
gear cutting
Clamping External External External External Internal External External
Actuation
Clamping surface
Longitudinal and cross grooves, cross grooves, smooth,
shaped hexagon, square, special contour
Smooth (optionally
coated, serrated,
toothed, for shape
clamping)
Smooth, hexa-
gon, square
Optionally
smooth, too-
thed, coated,
serrated
Axial component
Clamping range mm
4 - 120 4 - 120 4 - 120 4 - 80 20 - 106 2 - 80 30 - 180
Workpiece stop possible
Preparation for air sensing
Take-up
Cylindrical take-up Take-up in
CAPTIS clamp
system
Cylindrical
centering pick-
up, short taper
mount
Cylindrical
take-up
Page 7060 7061 7062 7064 7071 7073 7074
Mandrels and collet chucks
Orientation guide
Ori
enta
tion
gui
de
We have already implemented special solutions in all clamping system areas, some of which differ significantly from the values indicated above (for
example, clamping surfaces, clamping diameter or precision). Besides these standard clamping systems, we offer a number of special systems, such
as HYKS, KFG, centering and face clamping systems or combination clamps. Even unusual special solutions are a part of our focus.
www.eshop.roehm.biz
7004
HIGH AXIAL RUN-OUT PRECISION, CONCENTRICITY AND REPEATABILITY
Custom-fit interaction of the individual compon-
ents enables the highest degree of axial run-out
precision, concentricity and repeatability.
www.eshop.roehm.biz
7005
CARTRIDGE MANDRELS
ADVANTAGES AT A GLANCE
The various application areas of the cartridge mandrels require a varied programme which ranges
from manual or power-operated versions to versions with and without axial tension. The centric and
comprehensive internal clamping of cartridge mandrels are particularly impressive for very small clam-
ping diameters and at low overall heights.
Low weight and reduced
overall height by a compact
design
Double-sided slotted clamping
sleeve for high concentricity
Stable clamping by axial tension against workpiece stop
Low weight and reduced overall height by a compact design
High axial run-out precision, concentricity and repeatability
Elongation of the clamping
sleeve on the clamping taper
Workpiece stop for high
axial run-out precision
Car
trid
ge
man
dre
l
www.eshop.roehm.biz
7006
Car
trid
ge
Man
dre
l KF
S
Cartridge Mandrel
KFS - with axial tightening, force-actuated
on request
APPLICATIONInternal clamping of round workpieces. Turning, milling, grinding and toothing operations, as well as for balancing and measuring.Ideal for thin-walled and long workpieces or long clamping lengths.
TYPEForce-actuated. Clamping sleeves optionally vulcanized.Convertible to MFS (required new intermediate piece).
CUSTOMER BENEFITS Sturdy clamping of the workpiece thanks to axial tension against the workpiece
stop High concentricity, axial run-out and repeatability Light weight and reduced height thanks to compact design High flexibility thanks to modular system Fast change of clamping sleeves thanks to central clamping screw
TECHNICAL FEATURES- Hardened, low-wear design- Integrated lubrication- Air sensing prepared
KFS = force-actuated, flange, S-type
C18
KFS cartridge mandrel, power-operated with flanged seat, for internal clamping
Consisting of basic mandrel and intermediate piece
KFS 00 KFS 01 KFS 02 KFS 03 KFS 04 KFS 05 KFS 06 KFS 07 KFS 08 KFS 09 KFS 10 KFS 11
Cartridge Mandrel 599800 599801 599802 599803 599804 599805 599806 599807 599808 599809 599810 599811
Basic mandrel 599820 599821 599822 599823 599824 599825 599826 599827 599828 599829 599830 599831
Adapter power-operated 599833 599834 599980 599981 599982 599983 599984 599984 599984 315456 315456 315456
F max, in kN 7 9 12 12 15 15 20 20 25 25 25 25
Min-Ø unclamped from mm 14,7 19,7 24,7 29,7 34,7 39,7 44,7 54,7 64,7 81,7 100,7 119,7
Min-Ø unclamped to mm 19,7 24,7 29,7 34,7 39,7 44,7 54,7 64,7 81,7 100,7 119,7 139,7
Clamping-Ø max, mm 20,7 25,7 30,7 35,7 40,7 45,7 55,7 65,7 82,7 101,7 120,7 140,7
External-Ø A mm 100 100 100 100 100 130 130 130 160 160 160 160
Pitch diameter B mm 75 75 75 75 75 105 105 105 130 130 130 130
Pitch diameter C mm 75 75 75 75 75 105 105 105 130 130 130 149
Ø D mm 40 40 46 46 46 70 70 70 83 91 87 107
Ø E mm 54 54 60 60 60 84 84 84 103 160 160 160
Ø F mm M10 M10 M10 M10 M10 M10 M10 M10 M12 M12 M12 M12
S mm 31,5 36 45 49 59 59 79 89 99 121 138,9 171
V mm 21 21 21 21 21 21 21 21 23 21 21 25
W mm 33 33 33 33 33 33 33 33 35 21 21 25
X mm 36 36 37 41 36,5 37,5 35,5 35,5 35
Y mm 47,5 47,5 48 51,5 46 49,5 47 47 47 33 37 57
Z mm 79 83,5 93 100,5 105 108,5 126 136 146 154 176 228
Max. clamping force kN: 3,7-4,7-6,4-6,4-8,0-7,9-10,5-10,5-13,5-13,5-13,5-13,0
www.eshop.roehm.biz
7007
Car
trid
ge
Man
dre
l M
FS
Cartridge Mandrel
MFS - with axial tightening, manually actuated
on request
APPLICATIONInternal clamping of round workpieces. Turning, milling, grinding and toothing operations, as well as for balancing and measuring.Ideal for thin-walled and long workpieces or long clamping lengths.
TYPEManually actuated. Clamping sleeves optionally vulcanized.Convertible to KFS (required new intermediate piece).
CUSTOMER BENEFITS Sturdy clamping of the workpiece thanks to axial tension against the workpiece
stop High concentricity, axial run-out and repeatability Light weight and reduced height thanks to compact design High flexibility thanks to modular system Fast change of clamping sleeves thanks to central clamping screw
TECHNICAL FEATURES- Hardened, low-wear design- Integrated lubrication- Air sensing prepared
MFS = manually actuated, flange, S-type
C18
MFS cartridge mandrel, hand-operated with flanged seat, for internal clamping
Consisting of basic mandrel and intermediate piece
MFS 00 MFS 01 MFS 02 MFS 03 MFS 04 MFS 05 MFS 06
Cartridge Mandrel 1082800 1082801 1082802 1082803 1082804 1082805 1082806
Basic mandrel 599820 599821 599822 599823 599824 599825 599826
Adapter hand-operated 599985 599986 599987 599988 599989 599990 599991
Md max, Nm 7 12 20 22 30 35 45
Min-Ø unclamped from mm 14,7 19,7 24,7 29,7 34,7 39,7 44,7
Min-Ø unclamped to mm 19,7 24,7 29,7 34,7 39,7 44,7 54,7
Clamping-Ø max, mm 20,7 25,7 30,7 35,7 40,7 45,7 55,7
External-Ø A mm 100 100 100 100 100 130 130
Pitch diameter B mm 75 75 75 75 75 105 105
Pitch diameter C mm 75 75 75 75 75 105 105
Ø D mm 40 40 46 46 46 70 70
Ø E mm 54 54 60 60 60 84 84
Ø F mm M10 M10 M10 M10 M10 M10 M10
S mm 31,5 36 45 49 59 59 79
V mm 21 21 21 21 21 21 21
W mm 33 33 33 33 33 33 33
X mm 36 36 37 41 36,5 37,5 35,5
Y mm 47,5 47,5 48 51,5 46 49,5 47
Z mm 79 83,5 93 100,5 105 108,5 126
www.eshop.roehm.biz
7008
Acc
esso
ries
KF
S/M
FS
Cartridge Mandrel
Accessories KFS / MFS
on request
C18
Clamping set KFS / MFS (not vulcanized), consisting of clamping sleeve and clamping screw
For size 00 01 02 03 04 05 06 07 08 09 10 11
Expansion in Ø mm 1 1 1 1 1 1 1 1 1 1 1 1
Length L mm 35 40 46 50 60 60 80 90 100 122 140 180
Min-Ø mm 14,7 19,7 24,7 29,7 34,7 39,7 44,7 54,7 64,7 100,7 119,7
Clamping set 1086311 1086322 1086333 1086344 1086355 1086366 1086377 1086388 1086399 1086437 1086457
Clamping sleeve 315330 315331 315332 315333 315334 315335 315336 315337 315338 315340 315302
Locking bolt 315469 315470 315471 315472 315473 315474 315475 315476 315477 315479 599998
Work stop 599840 599845 599850 599855 599860 599865 599992 599993 599994 599996 599997
Montage mandrel clamping sets 724176 724177 724178 724179 724180 724181 724182 724183 724184 724186 724187
Min-Ø mm 15,2 20,2 25,2 30,2 35,2 40,2 45,7 55,7 65,7 81,7 101,7 120,7
Clamping set 1086312 1086323 1086334 1086345 1086356 1086367 1086378 1086389 1086400 1086417 1086438 1086458
Clamping sleeve 650021 650034 650047 650060 650073 650086 650098 650110 650123 315339 650163 650184
Locking bolt 315469 315470 315471 315472 315473 315474 315475 315476 315477 315478 315479 599998
Work stop 599841 599846 599851 599856 599861 599866 599870 599880 599890 599995 599926 599945
Montage mandrel clamping sets 724176 724177 724178 724179 724180 724181 724182 724183 724184 724185 724186 724187
Min-Ø mm 15,7 20,7 25,7 30,7 35,7 40,7 46,7 56,7 66,7 82,7 102,7 121,7
Clamping set 1086313 1086324 1086335 1086346 1086357 1086368 1086379 1086390 1086401 1086418 1086439 1086459
Clamping sleeve 315341 315342 315343 315344 315345 315346 315347 315348 315349 650142 315351 315303
Locking bolt 315469 315470 315471 315472 315473 315474 315475 315476 315477 315478 315479 599998
Work stop 599841 599846 599851 599856 599861 599866 599871 599881 599891 599907 599927 599946
Montage mandrel clamping sets 724176 724177 724178 724179 724180 724181 724182 724183 724184 724185 724186 724187
Min-Ø mm 16,2 21,2 26,2 31,2 36,2 41,2 47,7 57,7 67,7 83,7 103,7 122,7
Clamping set 1086314 1086325 1086336 1086347 1086358 1086369 1086380 1086391 1086402 1086419 1086440 1086460
Clamping sleeve 650023 650036 650049 650062 650075 650088 650100 650112 650125 315350 650165 650186
Locking bolt 315469 315470 315471 315472 315473 315474 315475 315476 315477 315478 315479 599998
Work stop 599842 599847 599852 599857 599862 599867 599872 599882 599892 599908 599928 599947
Montage mandrel clamping sets 724176 724177 724178 724179 724180 724181 724182 724183 724184 724185 724186 724187
Min-Ø mm 16,7 21,7 26,7 31,7 36,7 41,7 48,7 58,7 68,7 84,7 104,7 123,7
Clamping set 1086315 1086326 1086337 1086348 1086359 1086370 1086381 1086392 1086403 1086420 1086441 1086461
Clamping sleeve 315352 315353 315354 315355 315356 315357 315358 315359 315360 650144 315362 315304
Locking bolt 315469 315470 315471 315472 315473 315474 315475 315476 315477 315478 315479 599998
Work stop 599842 599847 599852 599857 599862 599867 599873 599883 599893 599909 599929 599948
Montage mandrel clamping sets 724176 724177 724178 724179 724180 724181 724182 724183 724184 724185 724186 724187
Min-Ø mm 17,2 22,2 27,2 32,2 37,2 42,2 49,7 59,7 69,7 85,7 105,7 124,7
Clamping set 1086316 1086327 1086338 1086349 1086360 1086371 1086382 1086393 1086404 1086421 1086442 1086462
Clamping sleeve 650025 650038 650051 650064 650077 650090 315369 315370 315371 315361 650167 650188
Locking bolt 315469 315470 315471 315472 315473 315474 315475 315476 315477 315478 315479 599998
Work stop 599843 599848 599853 599858 599863 599868 599874 599884 599894 599910 599930 599949
Montage mandrel clamping sets 724176 724177 724178 724179 724180 724181 724182 724183 724184 724185 724186 724187
Min-Ø mm 17,7 22,7 27,7 32,7 37,7 42,7 50,7 60,7 70,7 86,7 106,7 125,7
Clamping set 1086317 1086328 1086339 1086350 1086361 1086372 1086383 1086394 1086405 1086422 1086443 1086463
Clamping sleeve 315363 315364 315365 315366 315367 315368 315380 315381 315382 650146 315373 315403
Locking bolt 315469 315470 315471 315472 315473 315474 315475 315476 315477 315478 315479 599998
Work stop 599843 599848 599853 599858 599863 599868 599875 599885 599895 599911 599931 599950
Montage mandrel clamping sets 724176 724177 724178 724179 724180 724181 724182 724183 724184 724185 724186 724187
Min-Ø mm 18,2 23,2 28,2 33,2 38,2 43,2 51,7 61,7 71,7 87,7 107,7 126,7
Clamping set 1086318 1086329 1086340 1086351 1086362 1086373 1086384 1086395 1086406 1086423 1086444 1086464
Clamping sleeve 650027 650040 650053 650066 650079 650092 650104 650116 650129 315372 650169 650190
Locking bolt 315469 315470 315471 315472 315473 315474 315475 315476 315477 315478 315479 599998
Work stop 599844 599849 599854 599859 599864 599869 599876 599886 599896 599912 599932 599951
Montage mandrel clamping sets 724176 724177 724178 724179 724180 724181 724182 724183 724184 724185 724186 724187
Min-Ø mm 18,7 23,7 28,7 33,7 38,7 43,7 52,7 62,7 72,7 88,7 108,7 127,7
Clamping set 1086319 1086330 1086341 1086352 1086363 1086374 1086385 1086396 1086407 1086424 1086445 1086465
Clamping sleeve 315374 315375 315376 315377 315378 315379 315385 315386 315387 650148 315384 315404
Locking bolt 315469 315470 315471 315472 315473 315474 315475 315476 315477 315478 315479 599998
Work stop 599844 599849 599854 599859 599864 599869 599877 599887 599897 599913 599933 599952
Montage mandrel clamping sets 724176 724177 724178 724179 724180 724181 724182 724183 724184 724185 724186 724187
Min-Ø mm 19,2 24,2 29,2 34,2 39,2 44,2 53,7 63,7 73,7 89,7 109,7 128,7
Clamping set 1086320 1086331 1086342 1086353 1086364 1086375 1086386 1086397 1086408 1086425 1086446 1086466
Clamping sleeve 650029 650042 650055 650068 650081 650094 650106 650118 650131 315383 650171 650192
Locking bolt 315469 315470 315471 315472 315473 315474 315475 315476 315477 315478 315479 599998
Work stop 599966 599967 599968 599969 599970 599971 599878 599888 599898 599914 599934 599953
Montage mandrel clamping sets 724176 724177 724178 724179 724180 724181 724182 724183 724184 724185 724186 724187
www.eshop.roehm.biz
7009
Acc
esso
ries
KF
S/M
FS
Cartridge Mandrel
Accessories KFS / MFS
on request
C18
Clamping set KFS / MFS (not vulcanized), consisting of clamping sleeve and clamping screw
For size 00 01 02 03 04 05 06 07 08 09 10 11
Expansion in Ø mm 1 1 1 1 1 1 1 1 1 1 1 1
Length L mm 35 40 46 50 60 60 80 90 100 122 140 180
Min-Ø mm 19,7 24,7 29,7 34,7 39,7 44,7 54,7 64,7 74,7 90,7 110,7 129,7
Clamping set 1086321 1086332 1086343 1086354 1086365 1086376 1086387 1086398 1086409 1086426 1086447 1086467
Clamping sleeve 650030 650043 650056 650069 650082 650095 650107 650119 315390 650150 315389 315405
Locking bolt 315469 315470 315471 315472 315473 315474 315475 315476 315477 315478 315479 599998
Work stop 599966 599967 599968 599969 599970 599971 599879 599889 599899 599915 599935 599954
Montage mandrel clamping sets 724176 724177 724178 724179 724180 724181 724182 724183 724184 724185 724186 724187
Min-Ø mm 75,7 91,7 111,7 130,7
Clamping set 1086410 1086427 1086448 1086468
Clamping sleeve 650133 315388 650173 650194
Locking bolt 315477 315478 315479 599998
Work stop 599900 599916 599936 599955
Montage mandrel clamping sets 724184 724185 724186 724187
Min-Ø mm 76,7 92,7 112,7 131,7
Clamping set 1086411 1086428 1086449 1086469
Clamping sleeve 315393 650152 315392 315406
Locking bolt 315477 315478 315479 599998
Work stop 599901 599917 599937 599956
Montage mandrel clamping sets 724184 724185 724186 724187
Min-Ø mm 77,7 93,7 113,7 132,7
Clamping set 1086412 1086429 1086450 1086470
Clamping sleeve 650135 315391 650175 650196
Locking bolt 315477 315478 315479 599998
Work stop 599902 599918 599938 599957
Montage mandrel clamping sets 724184 724185 724186 724187
Min-Ø mm 78,7 94,7 114,7 133,7
Clamping set 1086413 1086430 1086451 1086471
Clamping sleeve 315396 650154 315395 315407
Locking bolt 315477 315478 315479 599998
Work stop 599903 599919 599939 599958
Montage mandrel clamping sets 724184 724185 724186 724187
Min-Ø mm 79,7 95,7 115,7 134,7
Clamping set 1086414 1086431 1086452 1086472
Clamping sleeve 650137 315394 650177 650198
Locking bolt 315477 315478 315479 599998
Work stop 599904 599920 599940 599959
Montage mandrel clamping sets 724184 724185 724186 724187
Min-Ø mm 80,7 96,7 116,7 135,7
Clamping set 1086415 1086432 1086453 1086473
Clamping sleeve 315399 650156 315398 315408
Locking bolt 315477 315478 315479 599998
Work stop 599905 599921 599941 599960
Montage mandrel clamping sets 724184 724185 724186 724187
Min-Ø mm 81,7 97,7 117,7 136,7
Clamping set 1086416 1086433 1086454 1086474
Clamping sleeve 650139 315397 650179 650200
Locking bolt 315477 315478 315479 599998
Work stop 599906 599922 599942 599961
Montage mandrel clamping sets 724184 724185 724186 724187
Min-Ø mm 98,7 118,7 137,7
Clamping set 1086434 1086455 1086475
Clamping sleeve 650158 315401 315409
Locking bolt 315478 315479 599998
Work stop 599923 599943 599962
Montage mandrel clamping sets 724185 724186 724187
Min-Ø mm 99,7 119,7 138,7
Clamping set 1086435 1086456 1086476
Clamping sleeve 315400 650181 650202
Locking bolt 315478 315479 599998
Work stop 599924 599944 599963
Montage mandrel clamping sets 724185 724186 724187
Min-Ø mm 100,7 139,7
Clamping set 1086436 1086477
Clamping sleeve 650160 315410
Locking bolt 315478 599998
Work stop 599925 599964
Montage mandrel clamping sets 724185 724187
www.eshop.roehm.biz
7010
Acc
esso
ries
KF
S/M
FS
Cartridge Mandrel
Accessories KFS / MFS
on request
C18
Clamping set KFS / MFS vulcanized, consisting of clamping sleeve and clamping screw
For size 00 01 02 03 04 05 06 07 08 09 10 11
Expansion in Ø mm 1 1 1 1 1 1 1 1 1 1 1 1
Length L mm 35 40 46 50 60 60 80 90 100 122 140 180
Min-Ø mm 14,7 19,7 24,7 29,7 34,7 39,7 44,7 54,7 64,7 100,7 119,7
Clamping set 1086511 1086522 1086533 1086544 1086555 1086566 1086577 1086588 1086599 1086637 1086657
Clamping sleeve vulcanized 315730 315731 315732 315733 315734 315735 315736 315737 315738 315740 315702
Locking bolt 315469 315470 315471 315472 315473 315474 315475 315476 315477 315479 599998
Work stop 599840 599845 599850 599855 599860 599865 599992 599993 599994 599996 599997
Montage mandrel clamping sets 724176 724177 724178 724179 724180 724181 724182 724183 724184 724186 724187
Min-Ø mm 15,2 20,2 25,2 30,2 35,2 40,2 45,7 55,7 65,7 81,7 101,7 120,7
Clamping set 1086512 1086523 1086534 1086545 1086556 1086567 1086578 1086589 1086600 1086617 1086638 1086658
Clamping sleeve vulcanized 650211 650224 650237 650250 650263 650276 650288 651051 651063 315739 651103 651124
Locking bolt 315469 315470 315471 315472 315473 315474 315475 315476 315477 315478 315479 599998
Work stop 599841 599846 599851 599856 599861 599866 599870 599880 599890 599995 599926 599945
Montage mandrel clamping sets 724176 724177 724178 724179 724180 724181 724182 724183 724184 724185 724186 724187
Min-Ø mm 15,7 20,7 25,7 30,7 35,7 40,7 46,7 56,7 66,7 82,7 102,7 121,7
Clamping set 1086513 1086524 1086535 1086546 1086557 1086568 1086579 1086590 1086601 1086618 1086639 1086659
Clamping sleeve vulcanized 315741 315742 315743 315744 315745 315746 315747 315748 315749 651082 315751 315703
Locking bolt 315469 315470 315471 315472 315473 315474 315475 315476 315477 315478 315479 599998
Work stop 599841 599846 599851 599856 599861 599866 599871 599881 599891 599907 599927 599946
Montage mandrel clamping sets 724176 724177 724178 724179 724180 724181 724182 724183 724184 724185 724186 724187
Min-Ø mm 16,2 21,2 26,2 31,2 36,2 41,2 47,7 57,7 67,7 83,7 103,7 122,7
Clamping set 1086514 1086525 1086536 1086547 1086558 1086569 1086580 1086591 1086602 1086619 1086640 1086660
Clamping sleeve vulcanized 650213 650226 650239 650252 650265 650278 650290 651053 651065 315750 651105 651126
Locking bolt 315469 315470 315471 315472 315473 315474 315475 315476 315477 315478 315479 599998
Work stop 599842 599847 599852 599857 599862 599867 599872 599882 599892 599908 599928 599947
Montage mandrel clamping sets 724176 724177 724178 724179 724180 724181 724182 724183 724184 724185 724186 724187
Min-Ø mm 16,7 21,7 26,7 31,7 36,7 41,7 48,7 58,7 68,7 84,7 104,7 123,7
Clamping set 1086515 1086526 1086537 1086548 1086559 1086570 1086581 1086592 1086603 1086620 1086641 1086661
Clamping sleeve vulcanized 315752 315753 315754 315755 315756 315757 315758 315759 315760 651084 315762 315704
Locking bolt 315469 315470 315471 315472 315473 315474 315475 315476 315477 315478 315479 599998
Work stop 599842 599847 599852 599857 599862 599867 599873 599883 599893 599909 599929 599948
Montage mandrel clamping sets 724176 724177 724178 724179 724180 724181 724182 724183 724184 724185 724186 724187
Min-Ø mm 17,2 22,2 27,2 32,2 37,2 42,2 49,7 59,7 69,7 85,7 105,7 124,7
Clamping set 1086516 1086527 1086538 1086549 1086560 1086571 1086582 1086593 1086604 1086621 1086642 1086662
Clamping sleeve vulcanized 650215 650228 650241 650254 650267 650280 315769 315770 315771 315761 651107 651128
Locking bolt 315469 315470 315471 315472 315473 315474 315475 315476 315477 315478 315479 599998
Work stop 599843 599848 599853 599858 599863 599868 599874 599884 599894 599910 599930 599949
Montage mandrel clamping sets 724176 724177 724178 724179 724180 724181 724182 724183 724184 724185 724186 724187
Min-Ø mm 17,7 22,7 27,7 32,7 37,7 42,7 50,7 60,7 70,7 86,7 106,7 125,7
Clamping set 1086517 1086528 1086539 1086550 1086561 1086572 1086583 1086594 1086605 1086622 1086643 1086663
Clamping sleeve vulcanized 315763 315764 315765 315766 315767 315768 315780 315781 315782 651086 315773 315705
Locking bolt 315469 315470 315471 315472 315473 315474 315475 315476 315477 315478 315479 599998
Work stop 599843 599848 599853 599858 599863 599868 599875 599885 599895 599911 599931 599950
Montage mandrel clamping sets 724176 724177 724178 724179 724180 724181 724182 724183 724184 724185 724186 724187
Min-Ø mm 18,2 23,2 28,2 33,2 38,2 43,2 51,7 61,7 71,7 87,7 107,7 126,7
Clamping set 1086518 1086529 1086540 1086551 1086562 1086573 1086584 1086595 1086606 1086623 1086644 1086664
Clamping sleeve vulcanized 650217 650230 650243 650256 650269 650282 650294 651057 651069 315772 651109 651130
Locking bolt 315469 315470 315471 315472 315473 315474 315475 315476 315477 315478 315479 599998
Work stop 599844 599849 599854 599859 599864 599869 599876 599886 599896 599912 599932 599951
Montage mandrel clamping sets 724176 724177 724178 724179 724180 724181 724182 724183 724184 724185 724186 724187
Min-Ø mm 18,7 23,7 28,7 33,7 38,7 43,7 52,7 62,7 72,7 88,7 108,7 127,7
Clamping set 1086519 1086530 1086541 1086552 1086563 1086574 1086585 1086596 1086607 1086624 1086645 1086665
Clamping sleeve vulcanized 315774 315775 315776 315777 315778 315779 315785 315786 315787 651088 315784 315706
Locking bolt 315469 315470 315471 315472 315473 315474 315475 315476 315477 315478 315479 599998
Work stop 599844 599849 599854 599859 599864 599869 599877 599887 599897 599913 599933 599952
Montage mandrel clamping sets 724176 724177 724178 724179 724180 724181 724182 724183 724184 724185 724186 724187
Min-Ø mm 19,2 24,2 29,2 34,2 39,2 44,2 53,7 63,7 73,7 89,7 109,7 128,7
Clamping set 1086520 1086531 1086542 1086553 1086564 1086575 1086586 1086597 1086608 1086625 1086646 1086666
Clamping sleeve vulcanized 650219 650232 650245 650258 650271 650284 650296 651059 651071 315783 651111 651132
www.eshop.roehm.biz
7011
Acc
esso
ries
KF
S/M
FS
Cartridge Mandrel
Accessories KFS / MFS
on request
C18
Clamping set KFS / MFS vulcanized, consisting of clamping sleeve and clamping screw
For size 00 01 02 03 04 05 06 07 08 09 10 11
Expansion in Ø mm 1 1 1 1 1 1 1 1 1 1 1 1
Length L mm 35 40 46 50 60 60 80 90 100 122 140 180
Locking bolt 315469 315470 315471 315472 315473 315474 315475 315476 315477 315478 315479 599998
Work stop 599966 599967 599968 599969 599970 599971 599878 599888 599898 599914 599934 599953
Montage mandrel clamping sets 724176 724177 724178 724179 724180 724181 724182 724183 724184 724185 724186 724187
Min-Ø mm 19,7 24,7 29,7 34,7 39,7 44,7 54,7 64,7 74,7 90,7 110,7 129,7
Clamping set 1086521 1086532 1086543 1086554 1086565 1086576 1086587 1086598 1086609 1086626 1086647 1086667
Clamping sleeve vulcanized 650220 650233 650246 650259 650272 650285 650297 651060 315790 651090 315789 315707
Locking bolt 315469 315470 315471 315472 315473 315474 315475 315476 315477 315478 315479 599998
Work stop 599966 599967 599968 599969 599970 599971 599879 599889 599899 599915 599935 599954
Montage mandrel clamping sets 724176 724177 724178 724179 724180 724181 724182 724183 724184 724185 724186 724187
Min-Ø mm 75,7 91,7 111,7 130,7
Clamping set 1086610 1086627 1086648 1086668
Clamping sleeve vulcanized 651073 315788 651113 651134
Locking bolt 315477 315478 315479 599998
Work stop 599900 599916 599936 599955
Montage mandrel clamping sets 724184 724185 724186 724187
Min-Ø mm 76,7 92,7 112,7 131,7
Clamping set 1086611 1086628 1086649 1086669
Clamping sleeve vulcanized 651074 651092 651114 651135
Locking bolt 315477 315478 315479 599998
Work stop 599901 599917 599937 599956
Montage mandrel clamping sets 724184 724185 724186 724187
Min-Ø mm 77,7 93,7 113,7 132,7
Clamping set 1086612 1086629 1086650 1086670
Clamping sleeve vulcanized 651075 651093 651115 651136
Locking bolt 315477 315478 315479 599998
Work stop 599902 599918 599938 599957
Montage mandrel clamping sets 724184 724185 724186 724187
Min-Ø mm 78,7 94,7 114,7 133,7
Clamping set 1086613 1086630 1086651 1086671
Clamping sleeve vulcanized 315796 651094 315795 315709
Locking bolt 315477 315478 315479 599998
Work stop 599903 599919 599939 599958
Montage mandrel clamping sets 724184 724185 724186 724187
Min-Ø mm 79,7 95,7 115,7 134,7
Clamping set 1086614 1086631 1086652 1086672
Clamping sleeve vulcanized 651077 315794 651117 651138
Locking bolt 315477 315478 315479 599998
Work stop 599904 599920 599940 599959
Montage mandrel clamping sets 724184 724185 724186 724187
Min-Ø mm 80,7 96,7 116,7 135,7
Clamping set 1086615 1086632 1086653 1086673
Clamping sleeve vulcanized 315799 651096 315798 315710
Locking bolt 315477 315478 315479 599998
Work stop 599905 599921 599941 599960
Montage mandrel clamping sets 724184 724185 724186 724187
Min-Ø mm 81,7 97,7 117,7 136,7
Clamping set 1086616 1086633 1086654 1086674
Clamping sleeve vulcanized 651079 315797 651119 651140
Locking bolt 315477 315478 315479 599998
Work stop 599906 599922 599942 599961
Montage mandrel clamping sets 724184 724185 724186 724187
Min-Ø mm 98,7 118,7 137,7
Clamping set 1086634 1086655 1086675
Clamping sleeve vulcanized 651098 315801 315711
Locking bolt 315478 315479 599998
Work stop 599923 599943 599962
Montage mandrel clamping sets 724185 724186 724187
Min-Ø mm 99,7 119,7 138,7
Clamping set 1086635 1086656 1086676
Clamping sleeve vulcanized 315800 651121 651142
Locking bolt 315478 315479 599998
Work stop 599924 599944 599963
Montage mandrel clamping sets 724185 724186 724187
Min-Ø mm 100,7 139,7
Clamping set 1086636 1086677
Clamping sleeve vulcanized 651100 315712
Locking bolt 315478 599998
Work stop 599925 599964
Montage mandrel clamping sets 724185 724187
www.eshop.roehm.biz
7012
Intermediate flange
Adjusting screw
Cartridge Mandrel
Intermediate flange KFS / MFS
Inte
rmed
iate
fla
nge
KF
S /
MF
S
APPLICATION
For adaption of cartridge mandrel KFR/MFR/KFR-SE/MFR-SE or
KFS/MFS - on spindle head ISO 702-1 / ISO 702-3
(DIN 55021/55022/55026 and 55027).
TYPE
For KFR/MFR/KFR-SE/MFR-SE or KFS/MFS.
CUSTOMER BENEFITS
By replacement of the intermediate flange, one cartridge
mandrel can be used on different machines
TECHNICAL FEATURES
Adaptation of KFR/MFR/KFR-SE/MFR-SE cartridge mandrel
or KFS/MFS on spindle head, with or without adjusting screw, with
or without performing air sensing. Version acc. to ISO 702-1
(DIN 55028-A) or ISO 702-3 (DIN 55028-C), in size no. 5, no.
6, no. 8, no. 11 or no. 5, no. 6, no. 8 (A5, A6, A8, A11 or C5,
C6, C8).
on requestwww.eshop.roehm.bizwww.eshop.roehm.biz
7013
C 18
Intermediate flange ISO 702-1 (DIN 55026/55021) without adjusting screwsNr. 5 (A 05) Nr. 6 (A 06) Nr. 8 (A 08) Nr. 11 (A 11)
Intermediate flange 893975 893976 893977 893978
Design without air-sensing without air-sensing without air-sensing without air-sensing
Mount-Ø 55 mm +0,003/+0,001 +0,003/+0,001 +0,003/+0,001 +0,003/+0,001
A mm 45 45 50 50
Ø B mm 165 170 220 282
Ø C mm 104,8 133,4 171,4 235
Ø D mm 82,563 106,375 139,719 196,869
Ø E M10 M12 M16 M20
Ø F mm 16,3 19,45 24,2 29,4
Acc
esso
ries
KF
S/M
FS
Cartridge Mandrel
Accessories KFS / MFS
on request
C 18
Intermediate flange ISO 702-1 (DIN 55028) with adjusting screwNr. 5 (A 05) Nr. 6 (A 06) Nr. 8 (A 08)
Intermediate flange 893979 893980 893981
Design without air-sensing without air-sensing without air-sensing
Mount-Ø 55 mm +0,05/+0,04 +0,05/+0,04 +0,05/+0,04
A mm 45 45 50
Ø B mm 165 170 220
Ø C mm 104,8 133,4 171,4
Ø D mm 82,563 106,375 139,719
Ø E M10 M12 M16
Ø F mm 16,3 19,45 24,2
www.eshop.roehm.biz
7014
Acc
esso
ries
KF
S/M
FS
Cartridge Mandrel
Accessories KFS / MFS
on request
C 18
Intermediate flange ISO 702-3 (DIN 55027/55022) without adjusting screwsNr. 5 (C 05) Nr. 6 (C 06) Nr. 8 (C 08)
Intermediate flange 893982 893983 893984
Design without air-sensing without air-sensing without air-sensing
Mount-Ø 55 mm +0,003/+0,001 +0,003/+0,001 +0,003/+0,001
A mm 45 45 50
Ø B mm 165 170 220
Ø C mm 104,8 133,4 171,4
Ø D mm 82,563 106,375 139,719
Ø E M 10 M 12 M 16
Ø F mm 16,3 19,45 24,2
C 18
Intermediate flange ISO 702-3 (DIN 55027/55022) with adjusting screwsNr. 5 (C 05) Nr. 6 (C 06) Nr. 8 (C 08)
Intermediate flange 893985 893986 893987
Design without air-sensing without air-sensing without air-sensing
Mount-Ø 55 mm +0,05/+0,04 +0,05/+0,04 +0,05/+0,04
A mm 45 45 50
Ø B mm 165 170 220
Ø C mm 104,8 133,4 171,4
Ø D mm 82,563 106,375 139,719
Ø E M 10 M 12 M 16
Ø F mm 16,3 19,45 24,2
www.eshop.roehm.biz
7015
Acc
esso
ries
KF
S/M
FS
Cartridge Mandrel
Accessories KFS / MFS
on request
APPLICATIONFor manual clamping device exchange in a minimum of time.
TYPEManual quick-change system for clamping devices. Fits for KFR/MFR or KFS/MFS.Central lubrication and/or air sensing control possible.
CUSTOMER BENEFITS Manual clamping devices change in about 30 seconds High change precision within 0.005 mm Quick change of different clamping devices with short time, similar to the auto-
matic or semiautometic clamping devices changing systems
TECHNICAL FEATURES- Quick-change system suitable due to recording RMS see quick-change system
RMS (Product Group 6)- Corresponds to the guidelines of the Employer‘s Liability Insurance Association in
combination with RÖHM safety clamping cylinder OVS and LVS
C18
RMS quick-change system, hand-operated for clamping devices
KK 06 KK 08
RMS - complete (flange incl. quick-clamping screw)
1160026 1160027
Adapters RMS 1183310 1183311
A 45 50
Ø B mm 170 220
Ø C 133,4 171,4
Ø D 106,375 139,719
Ø E mm M12 M16
Ø F mm 55 (+0,003/+0,001) 55 (+0,003/+0,001)
Indermediate flange
Adapters RMS
Quick-clamping screwRMS
www.eshop.roehm.biz
7016
Car
trid
ge
Man
dre
l KF
R
Cartridge Mandrel
KFR - force-actuated
on request
APPLICATIONInternal clamping of round workpieces. Turning, grinding and toothing operations, as well as for balancing and measuring.Ideal for short clamping lengths / workpieces.
TYPEForce-actuated. Without axial tightening. Clamping sleeves optionally vulcanized.Convertible to MFR (required new intermediate piece).
CUSTOMER BENEFITS No workpiece tension thanks to def. axial tension against the workpiece stop High concentricity, axial run-out and repeatability Low-maintenance
TECHNICAL FEATURES- Hardened, low-wear design- Integrated lubrication- Air sensing prepared
KFR = force-actuated, flange, R-type
C18
KFR cartridge mandrel, power-operated with flanged seat, for internal clamping
Consisting of basic body, clamping taper, intermediate piece, nut
KFR 00 KFR 01 KFR 02 KFR 03 KFR 04 KFR 05 KFR 06 KFR 07 KFR 08 KFR 09 KFR 10 KFR 11 KFR 12
Cartridge Mandrel 893960 893961 893962 893963 893964 893965 893966 893967 893968 893969 893970 893971 893972
Base bolt 893800 893801 893802 893803 893804 893805 893806 893807 893807 893809 893809 893809 893809
Clamping taper 650340 650341 650342 650343 650344 650345 650346 650347 650348 650349 650350 650351 650352
Adapter power-operated 893816 893817 893818 893819 893820 893820 893821 893822 893822 893822 893822 893822 893822
Nut 893814 893814 893814
F max, in kN 4,65 13,1 19,5 24,4 26,8 33 33 33 33 33 33 33 33
Max, total clamping force approx, kN 140 140 140 140 140 140 140
Min-Ø unclamped from mm 14,2 19,7 25,2 35,2 40,2 50,2 60,7 70,7 80,7 90,7 100,7 110,7 120,7
Min-Ø unclamped to mm 19,7 25,2 35,2 40,2 50,2 60,7 70,7 80,7 90,7 100,7 110,7 120,7 130,7
Clamping-Ø max, mm 20,2 25,7 35,72 40,7 61,2 61,2 71,7 81,7 91,7 101,7 111,7 121,7 131,7
External-Ø A mm 100 100 100 100 130 130 130 160 160 160 160 160 160
Pitch diameter B mm 75 75 75 75 105 105 105 130 130 130 130 130 130
Pitch diameter C mm 85 85 85 85 114 114 114 145 145 148 148 148 148
Ø C mm 98 130 130 175 175 175 175
Ø D mm 50 50 50 50 78 78 78 100 100 160 160 160 160
Ø E mm 70 70 70 70 98 98 98 130 130 175 175 175 175
Ø F mm M10 M10 M10 M10 M10 M10 M10 M12 M12 M12 M12 M12 M12
S mm 21 27 27 27 42 42 57 55 55 63 63 63 63
V mm 21 21 21 21 21 21 21 32 32 12 12 12 12
W mm 33 33 33 33 33 33 33 50 50 68 68 68 68
X mm 39 39 39 39 41 41 41 58 58 83 83 83 83
Y mm 50 52 52 52 54 54 54 73 73 92 92 92 92
Z mm 71 79 79 79 96 96 111 128 128 146 146 146 146
Max. clamping force kN: 1,9-5,5-8,3-10,4-11,4-14,0-14,0-14,0-14,0-14,0-14,0-14,0-14,0
www.eshop.roehm.biz
7017
Cartridge Mandrel
MFR - without axial tightening, manually actuated
on request
APPLICATIONInternal clamping of round workpieces. Turning, grinding and toothing operations, as well as for balancing and measuring.Ideal for short clamping lengths / workpieces.
TYPEManually actuated. Optional vulcanized clamping sleeves/segment sleeves (segment clamping mandrel KFR-SE).
CUSTOMER BENEFITS No workpiece tension thanks to def. axial tension against the workpiece stop High concentricity, axial run-out and repeatability Low-maintenance
TECHNICAL FEATURES- Hardened, low-wear design- Integrated lubrication- Air sensing prepared
MFR = manually actuated, flange, R-type
C18
MFR cartridge mandrel, hand-operated with flanged seat, for internal clamping
Consisting of basic body, clamping taper, intermediate piece
MFR 00 MFR 01 MFR 02 MFR 03 MFR 04 MFR 05 MFR 06
Cartridge Mandrel 1077700 1077701 1077702 1077703 1077704 1077705 1077706
Base bolt 893800 893801 893802 893803 893804 893805 893806
Clamping taper 650340 650341 650342 650343 650344 650345 650346
Adapter hand-operated 893823 893824 893825 893826 893827 893827 893828
Md max, Nm 4 5 40 55 60 75 85
Min-Ø unclamped from mm 14,2 19,7 25,2 35,2 40,2 50,2 60,7
Min-Ø unclamped to mm 19,7 25,2 35,2 40,2 50,2 60,7 70,7
Clamping-Ø max, mm 20,2 25,7 35,7 40,7 50,7 61,2 71,7
External-Ø A mm 100 100 100 100 130 130 130
Pitch diameter B mm 75 75 75 75 105 105 105
Pitch diameter C mm 85 85 85 85 114 114 114
Ø C mm 98
Ø D mm 50 50 50 50 78 78 78
Ø E mm 70 70 70 70 98 98 98
Ø F mm M10 M10 M10 M10 M10 M10 M10
S mm 21 27 27 27 42 42 57
V mm 21 21 21 21 21 21 21
W mm 33 33 33 33 33 33 33
X mm 39 39 39 39 41 41 41
Y mm 50 52 52 52 54 54 54
Z mm 71 79 79 79 96 96 111
www.eshop.roehm.biz
Car
trid
ge
Man
dre
l M
FR
7018
Cartridge Mandrel
Accessories KFR / MFR
on request
C 18
Clamping sleeve Type R - standard design, (not vulcanized)
For size 00 01 02 03 04 05 06 07 08 09 10 11 12
Expansion in Ø mm 0,5 0,5 0,5 0,5 0,5 0,5 1 1 1 1 1 1 1
Total length L 32 40 40 40 55 55 70 70 70 78 78 78 78
Min-Ø mm 14,2 19,7 25,2 35,2 40,2 50,2 60,7 70,7 80,7 100,7 110,7 120,7
Clamping sleeve1015500
1015513
1015526
1015548
1015560
1015582
1015605
1015617
1015629
1015653
1015665
1015677
Work stop 893830 893836 893842 893852 893857 893867 893878 893888 893897 893917 893927 893937
Min-Ø mm 14,7 20,2 25,7 35,7 40,7 50,7 61,7 71,7 81,7 90,7 101,7 111,7 121,7
Clamping sleeve 1015501 1015514
1015527
1015549
1015561
1015583
1015606
1015618
1015630
1015641
1015654
1015666
1015678
Work stop 893830 893836 893842 893852 893857 893867 893879 893889 893898 893907 893918 893928 893938
Min-Ø mm 15,2 20,7 26,2 36,2 41,2 51,2 62,7 72,7 82,7 91,7 102,7 112,7 122,7
Clamping sleeve1015502
1015515
1015528
1015550
1015562
1015584
1015607
1015619
1015631
1015642
1015655
1015667
1015679
Work stop 893830 893837 893842 893852 893857 893867 893880 893890 893899 893908 893919 893929 893939
Min-Ø mm 15,7 21,2 26,7 36,7 41,7 51,7 63,7 73,7 83,7 92,7 103,7 113,7 123,7
Clamping sleeve1015503
1015516
1015529
1015551
1015563
1015585
1015608
1015620
1015632
1015643
1015656
1015668
1015680
Work stop 893831 893837 893843 893853 893858 893868 893881 893891 893900 893909 893920 893930 893940
Min-Ø mm 16,2 21,7 27,2 37,2 42,2 52,2 64,7 74,7 84,7 93,7 104,7 114,7 124,7
Clamping sleeve1015504
1015517
1015530
1015552
1015564
1015586
1015609
1015621
1015633
1015644
1015657
1015669
1015681
Work stop 893831 893838 893843 893853 893858 893868 893882 893892 893901 893910 893921 893931 893941
Min-Ø mm 16,7 22,2 27,7 37,7 42,7 52,7 65,7 75,7 85,7 94,7 105,7 115,7 125,7
Clamping sleeve1015505
1015518
1015531
1015553
1015565
1015587
1015610
1015622
1015634
1015645
1015658
1015670
1015682
Work stop 893832 893838 893844 893854 893859 893869 893883 893893 893902 893911 893922 893932 893942
Min-Ø mm 17,2 22,7 28,2 38,2 43,2 53,2 66,7 76,7 86,7 95,7 106,7 116,7 126,7
Clamping sleeve1015506
1015519
1015532
1015554
1015566
1015588
1015611
1015623
1015635
1015646
1015659
1015671
1015683
Work stop 893832 893839 893844 893854 893859 893869 893884 893894 893903 893912 893923 893933 893943
Min-Ø mm 17,7 23,2 28,7 38,7 43,7 53,7 67,7 77,7 87,7 96,7 107,7 117,7 127,7
Clamping sleeve 1015507 1015520
1015533
1015555
1015567
1015589
1015612
1015624
1015636
1015647
1015660
1015672
1015684
Work stop 893833 893839 893845 893855 893860 893870 893885 893895 893904 893913 893924 893934 893944
Min-Ø mm 18,2 23,7 29,2 39,2 44,2 54,2 68,7 78,7 88,7 97,7 108,7 118,7 128,7
Clamping sleeve1015508
1015521
1015534
1015556
1015568
1015590
1015613
1015625
1015637
1015648
1015661
1015673
1015685
Work stop 893833 893840 893845 893855 893860 893870 893886 893947 893905 893914 893925 893935 893945
Min-Ø mm 18,7 24,2 29,7 39,7 44,7 54,7 69,7 79,7 89,7 98,7 109,7 119,7 129,7
Clamping sleeve1015509
1015522
1015535
1015557
1015569
1015591
1015614
1015626
1015638
1015649
1015662
1015674
1015686
Work stop 893834 893840 893846 893856 893861 893871 893887 893896 893906 893915 893926 893936 893946
Min-Ø mm 19,2 24,7 30,2 40,2 45,2 55,2 70,7 80,7 90,7 99,7 110,7 120,7 130,7
Clamping sleeve1015510
1015523
1015536
1015558
1015570
1015592
1015615
1015627
1015639
1015650
1015663
1015675
1015687
Work stop 893834 893841 893846 893856 893861 893871 893887 893896 893906 893916 893926 893936 893946
Min-Ø mm 19,7 25,2 30,7 45,7 55,7 100,7
Clamping sleeve1015511
1015524
1015537
1015571
1015593
1015651
Work stop 893835 893841 893847 893862 893872 893916
Min-Ø mm 31,2 46,2 56,2
Clamping sleeve1015538
1015572
1015594
Work stop 893847 893862 893872
Min-Ø mm 31,7 46,7 56,7
Clamping sleeve1015539
1015573
1015595
Work stop 893848 893863 893873
Different chucking Ø and profiled clamping sleeves on request
www.eshop.roehm.biz
Acc
esso
ries
KF
R /
M
FR
7019
Cartridge Mandrel
Accessories KFR / MFR
on request
C 18
Clamping sleeve Type R - standard design, (not vulcanized)
For size 00 01 02 03 04 05 06 07 08 09 10 11 12
Expansion in Ø mm 0,5 0,5 0,5 0,5 0,5 0,5 1 1 1 1 1 1 1
Total length L 32 40 40 40 55 55 70 70 70 78 78 78 78
Min-Ø mm 32,2 47,2 57,2
Clamping sleeve1015540
1015574
1015596
Work stop 893848 893863 893873
Min-Ø mm 32,7 47,7 57,7
Clamping sleeve1015541
1015575
1015597
Work stop 893849 893864 893874
Min-Ø mm 33,2 48,2 58,2
Clamping sleeve1015542
1015576
1015598
Work stop 893849 893864 893874
Min-Ø mm 33,7 48,7 58,7
Clamping sleeve1015543
1015577
1015599
Work stop 893850 893865 893875
Min-Ø mm 34,2 49,2 59,2
Clamping sleeve1015544
1015578
1015600
Work stop 893850 893865 893875
Min-Ø mm 34,7 49,7 59,7
Clamping sleeve1015545
1015579
1015601
Work stop 893851 893866 893876
Min-Ø mm 35,2 50,2 60,2
Clamping sleeve1015546
1015580
1015602
Work stop 893851 893866 893876
Min-Ø mm 60,7
Clamping sleeve1015603
Work stop 893877
Different chucking Ø and profiled clamping sleeves on request
,
www.eshop.roehm.biz
Acc
esso
ries
KF
R /
M
FR
7020
Cartridge Mandrel
Accessories KFR / MFR
on request
C 18
Clamping sleeve Type R - vulcanizedFor size 00 01 02 03 04 05 06 07 08 09 10 11 12
Expansion in Ø mm 0,5 0,5 0,5 0,5 0,5 0,5 1 1 1 1 1 1 1
Total length L 32 40 40 40 55 55 70 70 70 78 78 78 78
Min-Ø mm 14,2 19,7 25,2 35,2 40,2 50,2 60,7 70,7 80,7 100,7 110,7 120,7
Clamping sleeve 1015700 1015713 1015726 1015748 1015760 1015782 1015805 1015817 1015829 1015853 1015865 1015877
Work stop 893830 893836 893842 893852 893857 893867 893878 893888 893897 893917 893927 893937
Min-Ø mm 14,7 20,2 25,7 35,7 40,7 50,7 61,7 71,7 81,7 90,7 101,7 111,7 121,7
Clamping sleeve 1015701 1015714 1015727 1015749 1015761 1015783 1015806 1015818 1015830 1015841 1015854 1015866 1015878
Work stop 893830 893836 893842 893852 893857 893867 893879 893889 893898 893907 893918 893928 893938
Min-Ø mm 15,2 20,7 26,2 36,2 41,2 51,2 62,7 72,7 82,7 91,7 102,7 112,7 122,7
Clamping sleeve 1015702 1015715 1015728 1015750 1015762 1015784 1015807 1015819 1015831 1015842 1015855 1015867 1015879
Work stop 893830 893837 893842 893852 893857 893867 893880 893890 893899 893908 893919 893929 893939
Min-Ø mm 15,7 21,2 26,7 36,7 41,7 51,7 63,7 73,7 83,7 92,7 103,7 113,7 123,7
Clamping sleeve 1015703 1015716 1015729 1015751 1015763 1015785 1015808 1015820 1015832 1015843 1015856 1015868 1015880
Work stop 893831 893837 893843 893853 893858 893868 893881 893891 893900 893909 893920 893930 893940
Min-Ø mm 16,2 21,7 27,2 37,2 42,2 52,2 64,7 74,7 84,7 93,7 104,7 114,7 124,7
Clamping sleeve 1015704 1015717 1015730 1015752 1015764 1015786 1015809 1015821 1015833 1015844 1015857 1015869 1015881
Work stop 893831 893837 893843 893853 893858 893868 893882 893892 893901 893910 893921 893931 893941
Min-Ø mm 16,7 22,2 27,7 37,7 42,7 52,7 65,7 75,7 85,7 94,7 105,7 115,7 125,7
Clamping sleeve 1015705 1015718 1015731 1015753 1015765 1015787 1015810 1015822 1015834 1015845 1015858 1015870 1015882
Work stop 893832 893838 893844 893854 893859 893869 893883 893893 893902 893911 893922 893932 893942
Min-Ø mm 17,2 22,7 28,2 38,2 43,2 53,2 66,7 76,7 86,7 95,7 106,7 116,7 126,7
Clamping sleeve 1015706 1015719 1015732 1015754 1015766 1015788 1015811 1015823 1015835 1015846 1015859 1015871 1015883
Work stop 893832 893838 893844 893854 893859 893869 893884 893894 893903 893912 893923 893933 893943
Min-Ø mm 17,7 23,2 28,7 38,7 43,7 53,7 67,7 77,7 87,7 96,7 107,7 117,7 127,7
Clamping sleeve1015707
1015720 1015733 1015755 1015767 1015789 1015812 1015824 1015836 1015847 1015860 1015872 1015884
Work stop 893833 893839 893845
893855 893860 893870 893885 893895 893904 893913 893924 893934 893944
Min-Ø mm 18,2 23,7 29,2 39,2 44,2 54,2 68,7 78,7 88,7 97,7 108,7 118,7 128,7
Clamping sleeve 1015708 1015721 1015734 1015756 1015768 1015790 1015813 1015825 1015837 1015848 1015861 1015873 1015885
Work stop 893833 893839 893845
893855 893860 893870 893886 893947 893905 893914 893925 893935 893945
Min-Ø mm 18,7 24,2 29,7 39,7 44,7 54,7 69,7 79,7 89,7 98,7 109,7 119,7 129,7
Clamping sleeve 1015709 1015722 1015735 1015757 1015769 1015791 1015814 1015826 1015838 1015849 1015862 1015874 1015886
Work stop 893834 893840 893846 893856 893861 893871 893887 893896 893906 893915 893926 893936 893946
Min-Ø mm 19,2 24,7 30,2 40,2 45,2 55,2 70,7 80,7 90,7 99,7 110,7 120,7 130,7
Clamping sleeve 1015710 1015723 1015736 1015758 1015770 1015792 1015815 1015827 1015839 1015850 1015863 1015875 1015887
Work stop 893834 893840 893846 893856 893861 893871 893887 893896 893906 893916 893926 893936 893946
Min-Ø mm 19,7 25,2 30,7 45,7 55,7 100,7
Clamping sleeve 1015711 1015724 1015737 1015771 1015793 1015851
Work stop 893835 893841 893847 893862 893872 893916
Min-Ø mm 31,2 46,2 56,2
Clamping sleeve 1015738 1015772 1015794
Work stop 893847 893862 893872
Min-Ø mm 31,7 46,7 56,7
Clamping sleeve 1015739 1015773 1015795
Work stop 893848 893863 893873
Different chucking Ø and profiled clamping sleeves on request
www.eshop.roehm.biz
Acc
esso
ries
KF
R /
M
FR
7021
Cartridge Mandrel
Accessories KFR / MFR
on request
C 18
Clamping sleeve Type R - vulcanizedFor size 00 01 02 03 04 05 06 07 08 09 10 11 12
Expansion in Ø mm 0,5 0,5 0,5 0,5 0,5 0,5 1 1 1 1 1 1 1
Total length L 32 40 40 40 55 55 70 70 70 78 78 78 78
Min-Ø mm 32,2 47,2 57,2
Clamping sleeve 1015740 1015774 1015796
Work stop 893848 893863 893873
Min-Ø mm 32,7 47,7 57,7
Clamping sleeve 1015741 1015775 1015797
Work stop 893849 893864 893874
Min-Ø mm 33,2 48,2 58,2
Clamping sleeve 1015742 1015776 1015798
Work stop 893849 893864 893874
Min-Ø mm 33,7 48,7 58,7
Clamping sleeve 1015743 1015777 1015799
Work stop 893850 893865 893875
Min-Ø mm 34,2 49,2 59,2
Clamping sleeve 1015744 1015778 1015800
Work stop 893850 893865 893875
Min-Ø mm 34,7 49,7 59,7
Clamping sleeve 1015745 1015779 1015801
Work stop 893851 893866 893876
Min-Ø mm 35,2 50,2 60,2
Clamping sleeve 1015746 1015780 1015802
Work stop 893851 893866 893876
Min-Ø mm 60,7
Clamping sleeve 1015803
Work stop 893877
Different chucking Ø and profiled clamping sleeves on request
www.eshop.roehm.biz
Acc
esso
ries
KF
R /
M
FR
7022
Intermediate flange
Adjusting screw
APPLICATION
For adaption of cartridge mandrel KFR/MFR/KFR-SE/MFR-SE
or KFS/MFS - on spindle head ISO 702-1 / ISO 702-3 (DIN
55021/55022/55026 and 55027).
TYPE
For KFR/MFR/KFR-SE/MFR-SE or KFS/MFS.
CUSTOMER BENEFITS
By replacement of the intermediate flange, one cartridge
mandrel can be used on different machines
TECHNICAL FEATURES
Adaptation of mandrel KFR / MFR / KFR-SE / MFR SE or KFS /
MFS on spindle head, with or without adjustment, with or without
operation of air-conditioning control. Execution according to ISO
702-1 (DIN 55028-A) or ISO 702-3 (DIN 55028-C), in size no. 5, no.
6, no. 8, no. 11 or no. 5, no. 6, Nr. 8 (A5, A6, A8, A11 or C5, C6,
C8).
Cartridge Mandrel
Intermediate flange KFR / MFR
on requestwww.eshop.roehm.biz
Inte
rmed
iate
fla
nge
KF
R /
MF
R
7023
Cartridge Mandrel
Accessories KFR / MFR
on request
C 18
Intermediate flange ISO 702-1 (DIN 55026/55021) without adjusting screwsNr. 5 (A 05) Nr. 6 (A 06) Nr. 8 (A 08) Nr. 11 (A 11)
Intermediate flange 893975 893976 893977 893978
Design without air-sensing without air-sensing without air-sensing without air-sensing
Mount-Ø 55 mm +0,003/+0,001 +0,003/+0,001 +0,003/+0,001 +0,003/+0,001
A mm 45 45 50 50
Ø B mm 165 170 220 282
Ø C mm 104,8 133,4 171,4 235
Ø D mm 82,563 106,375 139,719 196,869
Ø E M10 M12 M16 M20
Ø F mm 16,3 19,45 24,2 29,4
C 18
Intermediate flange ISO 702-1 (DIN 55028) with adjusting screwNr. 5 (A 05) Nr. 6 (A 06) Nr. 8 (A 08)
Intermediate flange 893979 893980 893981
Design without air-sensing without air-sensing without air-sensing
Mount-Ø 55 mm +0,05/+0,04 +0,05/+0,04 +0,05/+0,04
A mm 45 45 50
Ø B mm 165 170 220
Ø C mm 104,8 133,4 171,4
Ø D mm 82,563 106,375 139,719
Ø E M10 M12 M16
Ø F mm 16,3 19,45 24,2
www.eshop.roehm.biz
Acc
esso
ries
KF
R /
M
FR
7024
Cartridge Mandrel
Accessories KFR / MFR
on request
C 18
Intermediate flange ISO 702-3 (DIN 55027/55022) without adjusting screwsNr. 5 (C 05) Nr. 6 (C 06) Nr. 8 (C 08)
Intermediate flange 893982 893983 893984
Design without air-sensing without air-sensing without air-sensing
Mount-Ø 55 mm +0,003/+0,001 +0,003/+0,001 +0,003/+0,001
A mm 45 45 50
Ø B mm 165 170 220
Ø C mm 104,8 133,4 171,4
Ø D mm 82,563 106,375 139,719
Ø E M 10 M 12 M 16
Ø F mm 16,3 19,45 24,2
C 18
Intermediate flange ISO 702-3 (DIN 55027/55022) with adjusting screwsNr. 5 (C 05) Nr. 6 (C 06) Nr. 8 (C 08)
Intermediate flange 893985 893986 893987
Design without air-sensing without air-sensing without air-sensing
Mount-Ø 55 mm +0,05/+0,04 +0,05/+0,04 +0,05/+0,04
A mm 45 45 50
Ø B mm 165 170 220
Ø C mm 104,8 133,4 171,4
Ø D mm 82,563 106,375 139,719
Ø E M 10 M 12 M 16
Ø F mm 16,3 19,45 24,2
www.eshop.roehm.biz
Acc
esso
ries
KF
R /
M
FR
7025
Cartridge Mandrel
Accessories KFR / MFR
on request
APPLICATIONFor manual clamping device exchange in a minimum of time.
TYPEManual quick-change system for clamping devices.Fits KFR (255-00), KFS (253-00).Central lubrication and/or air sensing control possible.
CUSTOMER BENEFITS Manual clamping devices change in about 30 seconds High change precision within 0.005 mm Quick change of different clamping devices with short time, similar to the auto-
matic or semiautometic clamping devices changing systems
TECHNICAL FEATURES- Quick-change system suitable due to recording RMS see quick-change system
RMS (Product Group 6)- Corresponds to the guidelines of the Employer‘s Liability Insurance Association in
combination with RÖHM safety clamping cylinder OVS and LVS
C18
RMS quick-change system, hand-operated for clamping devices
KK 06 KK 08
RMS - complete (flange incl. quick-clamping screw)
1160026 1160027
Adapters RMS 1183310 1183311
A 45 50
Ø B mm 170 220
Ø C 133,4 171,4
Ø D 106,375 139,719
Ø E mm M12 M16
Ø F mm 55 (+0,003/+0,001) 55 (+0,003/+0,001)
Indermediate flange
Adapters RMS
Quick-clamping screwRMS
www.eshop.roehm.biz
Acc
esso
ries
KF
R /
M
FR
7026
Cartridge Mandrel
KFB - with axial tightening, force-actuated
on request
APPLICATIONInternal clamping of round workpieces. Turning, milling, grinding and toothing operations, as well as for balancing and measuring.Ideal for very small clamping diameters starting from Ø 5.5 mm or small workpieces.
TYPEForce-actuated. Clamping sleeves optionally vulcanized.
CUSTOMER BENEFITS Sturdy clamping of the workpiece thanks to axial tension against the workpiece
stop High concentricity, axial run-out and repeatability Light weight and reduced height thanks to compact design
TECHNICAL FEATURES- Hardened, low-wear design
KFB = force-actuated, flange, B-type
C18
KFB cartridge mandrel, power-operated with flanged seat, for internal clamping
Consisting of basic mandrel, stop sleeve, guide sleeve, cotter, draw bolt
KFB 00 KFB 01 KFB 02 KFB 03 KFB 04 KFB 05 KFB 06 KFB 07
Cartridge Mandrel 327586 327587 327588 327589 327590 327591 327592 327593
Basic mandrel 323521 323522 323523 323524 323525 323526 323527 323528
Stop sleeve 323474 323475 323476 323477 323478 323479 323480 323481
Guide sleeve 323461 323462 323463 323464 323465 323466 323467 323468
Cotter 323508 323509 323510 323511 323512 323513 323514 323515
Draw bolt 323500 323501 323502 323502 323503 323504 323504 323505
F max, in kN 1,8 2,7 3,6 4,8 5,8 7,5 12 22
Max, total clamping force approx, kN 12 18 24 32 38 50 65 119
Min-Ø unclamped from mm 5,5 7,5 9,5 12 14,5 19,5 24,7 29,7
Min-Ø unclamped to mm 7 9 11,5 14,5 19 24,5 28,7 33,7
Clamping-Ø max, mm 7,5 9,5 12 15 19,5 25 29,7 34,7
External-Ø A mm 45 50 56 60 72 76 82 95
Pitch diameter B mm 36 39 46 50 60 64 70 80
Ø C h6 25 25 30 30 40 40 40 60
Ø D mm 24 31 38 40 52 54 60 66
Ø E mm M22x1,5 M27x1,5 M32x1,5 M36x1,5 M45x1,5 M48x1,5 M56x1,5 M60x1,5
Ø F mm M5 M6 M6 M6 M6 M6 M6 M8
Stroke G mm 5 5 5 5 5 5 6 6
Ø M M8 M8 M10 M10 M10 M12 M12 M12
S mm 9 13 15 20,5 24 30 36 40
T mm 14 14 15 15 15 18 18 18
U mm 27 27,5 29,5 29,5 30,5 33,5 33,5 36,5
V mm 11,5 12 13 13 14 14 14 17
W mm 7,5 8 9 9 10 10 10 12,5
X mm 12,5 13 15 15 16 16 16 18,5
Y mm 42 46 45 58 66 67 71 74
Z mm 51,5 58,5 70 78,5 90 97 107 114
Max. clamping force kN: 1,1-1,7-2,3-3,1-3,8-4,9-6,4-11,8
www.eshop.roehm.biz
Car
trid
ge
Man
dre
l KF
B
7027
Cartridge Mandrel
Accessories KFB
on request
C 18
Clamping sleeve Type B - standard design (not vulcanized)
For size KFB 00 KFB 01 KFB 02 KFB 03 KFB 04 KFB 05 KFB 06 KFB 07
Expansion in Ø mm 0,5 0,5 0,5 0,5 0,5 0,5 1 1
Total length E mm 11,5 15 19 20,5 28,5 34 40 43,5
Min-Ø mm 5,5 7,5 9,5 12 14,5 19,5 24,7 29,7
Clamping sleeve 315139 315140 315141 315142 315143 315144 315145 315146
Work stop 315126 315127 315128 315129 315130 315131 315132 315133
Min-Ø mm 6 8 10 12,5 15 20 25,7 30,7
Clamping sleeve 315152 315153 315154 315155 315156 315157 315158 315159
Work stop 315126 315127 315128 315129 315130 315131 315132 315133
Min-Ø mm 6,5 8,5 10,5 13 15,5 20,5 26,7 31,7
Clamping sleeve 315165 315166 315167 315168 315169 315170 315171 315172
Work stop 315126 315127 315128 315129 315130 315131 315132 315133
Min-Ø mm 7 9 11 13,5 16 21 27,7 32,7
Clamping sleeve 315178 315179 315180 315181 315182 315183 315184 315185
Work stop 315126 315127 315128 315129 315130 315131 315132 315133
Min-Ø mm 11,5 14 16,5 21,5 28,7 33,7
Clamping sleeve 315191 315192 315193 315194 315195 315196
Work stop 315128 315129 315130 315131 315132 315133
Min-Ø mm 14,5 17 22
Clamping sleeve 315202 315203 315204
Work stop 315129 315130 315131
Min-Ø mm 17,5 22,5
Clamping sleeve 315209 315210
Work stop 315130 315131
Min-Ø mm 18 23
Clamping sleeve 315215 315216
Work stop 315130 315131
Min-Ø mm 18,5 23,5
Clamping sleeve 315221 315222
Work stop 315130 315131
Min-Ø mm 19 24
Clamping sleeve 315227 315228
Work stop 315130 315131
Min-Ø mm 24,5
Clamping sleeve 315233
Work stop 315131
www.eshop.roehm.biz
Acc
esso
ries
KF
B
7028
Cartridge Mandrel
Accessories KFB
on request
C 18
Clamping sleeve Type B - vulcanized (protected against chips and dirt)
For size KFB 00 KFB 01 KFB 02 KFB 03 KFB 04 KFB 05 KFB 06 KFB 07
Expansion in Ø mm 0,5 0,5 0,5 0,5 0,5 0,5 1 1
Total length E mm 11,5 15 19 20,5 28,5 34 40 43,5
Min-Ø mm 5,5 7,5 9,5 12 14,5 19,5 24,7 29,7
Clamping sleeve 323739 323740 323741 323742 323743 323744 323745 323746
Work stop 323420 323423 323426 323430 323435 323444 323452 323459
Min-Ø mm 6 8 10 12,5 15 20 25,7 30,7
Clamping sleeve 323752 323753 323754 323755 323756 323757 323758 323759
Work stop 323421 323424 323427 323431 323436 323445 323453 323460
Min-Ø mm 6,5 8,5 10,5 13 15,5 20,5 26,7 31,7
Clamping sleeve 323765 323766 323767 323768 323769 323770 323771 323772
Work stop 323422 323425 323428 323432 323437 323446 323454 323540
Min-Ø mm 7 9 11 13,5 16 21 27,7 32,7
Clamping sleeve 323778 323779 323780 323781 323782 323783 323784 323785
Work stop 323487 323488 323429 323433 323438 323447 323455 323541
Min-Ø mm 11,5 14 16,5 21,5 28,7 33,7
Clamping sleeve 323791 323792 323793 323794 323795 323796
Work stop 323489 323434 323439 323448 323493 323494
Min-Ø mm 14,5 17 22
Clamping sleeve 323802 323803 323804
Work stop 323490 323440 323449
Min-Ø mm 17,5 22,5
Clamping sleeve 323809 323810
Work stop 323441 323450
Min-Ø mm 18 23
Clamping sleeve 323815 323816
Work stop 323442 323456
Min-Ø mm 18,5 23,5
Clamping sleeve 323821 323822
Work stop 323443 323457
Min-Ø mm 19 24
Clamping sleeve 323827 323828
Work stop 323491 323458
Min-Ø mm 24,5
Clamping sleeve 323833
Work stop 323492
Deviating clamping Ø as well as profiled clamping sleeves available on request
www.eshop.roehm.biz
Acc
esso
ries
KF
B
7029
Cartridge Mandrel
MZB - with axial tightening, manually actuated
on request
APPLICATIONInternal clamping of round workpieces. Turning, milling, grinding and toothing operations, as well as for balancing and measuring.Ideal for very small clamping diameters starting from Ø 5.5 mm or small workpieces.
TYPEManually actuated. Clamping sleeves optionally vulcanized.
CUSTOMER BENEFITS Sturdy clamping of the workpiece thanks to axial tension against the workpiece
stop High concentricity and repeatability Light weight and reduced height thanks to compact design
TECHNICAL FEATURES- Hardened, low-wear design
MZB = manually actuated, centre hole, B-type
C18
MZB cartridge mandrel, hand-operated with centre hole, for internal clamping
MZB 00 MZB 01 MZB 02 MZB 03 MZB 04 MZB 05 MZB 06 MZB 07 MZB 08 MZB 09 MZB 10 MZB 11 MZB 12
Cartridge Mandrel 1130361 1130362 1130363 1130364 1130365 1130366 1130367 1130368 1130369 1130370 1130371 1130372 1130373
Basic mandrel 315100 315101 315102 315103 315104 315105 315106 315107 315108 315109 315110 315111 315112
Nut 315113 315114 315115 315116 315117 315118 315119 315120 315121 315122 315123 315124 315125
Min-Ø unclamped from mm 5,5 7,5 9,5 12 14,5 19,5 24,7 29,7 34,7 39,7 44,7 54,7 64,7
Min-Ø unclamped to mm 7 9 11,5 14,5 19 24,5 28,7 33,7 38,7 43,7 53,7 63,7 78,7
Clamping-Ø max, mm 7,5 9,5 12 15 19,5 25 29,7 34,7 39,7 44,7 54,7 64,7 79,7
Ø A h6 mm 10 12 12 14 18 20 25 30 40 40 45 50 50
Ø B mm M14x1,5 M16x1,5 M20x1,5 M24x1,5 M30x1,5 M36x1,5 M42x1,5 M45x1,5 M52x1,5 M56x1,5 M65x1,5 M75x2 M95x2
Ø C mm 10,8 13 16,8 20,8 26,8 31,8 36,8 41,8 47,8 52,5 61,8 71,8 90,8
Ø D mm 19,5 23 28 31 38 47 54 57,5 66 74 83 93 108
Stroke G mm 5 5,5 5,5 5,5 5,5 6 6 6 6 6 6 6,5 7
L mm 74,5 79,5 89,5 97,5 102,5 113,5 136 144,5 156 166,5 197 208,5 221,5
U mm 30 30 35 35 35 40 45 50 55 60 67 67 67
V mm 5,5 6 6 6 6 6 7 7 7 7 7 7 7
W mm 29 33,5 34,5 36,5 37,5 37,5 48,5 48,5 48,5 48,5 53,5 56,5 58,5
X mm 44,5 48,5 53,5 61,5 66,5 72,5 89 92,5 99 104,5 128 139,5 152,5
www.eshop.roehm.biz
Car
trid
ge
Man
dre
l M
ZB
7030
Cartridge Mandrel
Accessories MZB
on request
C 18
Clamping sleeve Type B - standard design (not vulcanized)
For size MZB 00 MZB 01 MZB 02 MZB 03 MZB 04 MZB 05 MZB 06 MZB 07 MZB 08 MZB 09 MZB 10 MZB 11 MZB 12
Expansion in Ø mm 0,5 0,5 0,5 0,5 0,5 0,5 1 1 1 1 1 1 1
Total length E mm 11,5 15 19 20,5 28,5 34 40 43,5 50 55,5 74 82,5 93,5
Min-Ø mm 5,5 7,5 9,5 12 14,5 19,5 24,7 29,7 34,7 39,7 44,7 54,7 64,7
Clamping sleeve 315139 315140 315141 315142 315143 315144 315145 315146 315147 315148 315149 315150 315151
Work stop 315126 315127 315128 315129 315130 315131 315132 315133 315134 315135 315136 315137 315138
Min-Ø mm 6 8 10 12,5 15 20 25,7 30,7 35,7 40,7 45,7 55,7 65,7
Clamping sleeve 315152 315153 315154 315155 315156 315157 315158 315159 315160 315161 315162 315163 315164
Work stop 315126 315127 315128 315129 315130 315131 315132 315133 315134 315135 315136 315137 315138
Min-Ø mm 6,5 8,5 10,5 13 15,5 20,5 26,7 31,7 36,7 41,7 46,7 56,7 66,7
Clamping sleeve 315165 315166 315167 315168 315169 315170 315171 315172 315173 315174 315175 315176 315177
Work stop 315126 315127 315128 315129 315130 315131 315132 315133 315134 315135 315136 315137 315138
Min-Ø mm 7 9 11 13,5 16 21 27,7 32,7 37,7 42,7 47,7 57,7 67,7
Clamping sleeve 315178 315179 315180 315181 315182 315183 315184 315185 315186 315187 315188 315189 315190
Work stop 315126 315127 315128 315129 315130 315131 315132 315133 315134 315135 315136 315137 315138
Min-Ø mm 11,5 14 16,5 21,5 28,7 33,7 38,7 43,7 48,7 58,7 68,7
Clamping sleeve 315191 315192 315193 315194 315195 315196 315197 315198 315199 315200 315201
Work stop 315128 315129 315130 315131 315132 315133 315134 315135 315136 315137 315138
Min-Ø mm 14,5 17 22 49,7 59,7 69,7
Clamping sleeve 315202 315203 315204 315205 315206 315207
Work stop 315129 315130 315131 315136 315137 315138
Min-Ø mm 17,5 22,5 50,7 60,7 70,7
Clamping sleeve 315209 315210 315211 315212 315213
Work stop 315130 315131 315136 315137 315138
Min-Ø mm 18 23 51,7 61,7 71,7
Clamping sleeve 315215 315216 315217 315218 315219
Work stop 315130 315131 315136 315137 315138
Min-Ø mm 18,5 23,5 52,7 62,7 72,7
Clamping sleeve 315221 315222 315223 315224 315225
Work stop 315130 315131 315136 315137 315138
Min-Ø mm 19 24 53,7 63,7 73,7
Clamping sleeve 315227 315228 315229 315230 315231
Work stop 315130 315131 315136 315137 315138
Min-Ø mm 24,5 74,7
Clamping sleeve 315233 315208
Work stop 315131 315138
Min-Ø mm 75,7
Clamping sleeve 315214
Work stop 315138
Min-Ø mm 76,7
Clamping sleeve 315220
Work stop 315138
Min-Ø mm 77,7
Clamping sleeve 315226
Work stop 315138
Min-Ø mm 78,7
Clamping sleeve 315232
Work stop 315138
www.eshop.roehm.biz
Acc
esso
ries
MZ
B
7031
Cartridge Mandrel
Accessories MZB
on request
C 18
Clamping sleeve Type B - vulcanized (protected against chips and dirt)
For size MZB 00 MZB 01 MZB 02 MZB 03 MZB 04 MZB 05 MZB 06 MZB 07 MZB 08 MZB 09 MZB 10 MZB 11 MZB 12
Expansion in Ø mm 0,5 0,5 0,5 0,5 0,5 0,5 1 1 1 1 1 1 1
Total length E mm 11,5 15 19 20,5 28,5 34 40 43,5 50 55,5 74 82,5 93,5
Min-Ø mm 5,5 7,5 9,5 12 14,5 19,5 24,7 29,7 34,7 39,7 44,7 54,7 64,7
Clamping sleeve 323739 323740 323741 323742 323743 323744 323745 323746 323747 323748 323749 323750 323751
Work stop 315126 315127 315128 315129 315130 315131 315132 315133 315134 315135 315136 315137 315138
Min-Ø mm 6 8 10 12,5 15 20 25,7 30,7 35,7 40,7 45,7 55,7 65,7
Clamping sleeve 323752 323753 323754 323755 323756 323757 323758 323759 323760 323761 323762 323763 323764
Work stop 315126 315127 315128 315129 315130 315131 315132 315133 315134 315135 315136 315137 315138
Min-Ø mm 6,5 8,5 10,5 13 15,5 20,5 26,7 31,7 36,7 41,7 46,7 56,7 66,7
Clamping sleeve 323765 323766 323767 323768 323769 323770 323771 323772 323773 323774 323775 323776 323777
Work stop 315126 315127 315128 315129 315130 315131 315132 315133 315134 315135 315136 315137 315138
Min-Ø mm 7 9 11 13,5 16 21 27,7 32,7 37,7 42,7 47,7 57,7 67,7
Clamping sleeve 323778 323779 323780 323781 323782 323783 323784 323785 323786 323787 323788 323789 323790
Work stop 315126 315127 315128 315129 315130 315131 315132 315133 315134 315135 315136 315137 315138
Min-Ø mm 11,5 14 16,5 21,5 28,7 33,7 38,7 43,7 48,7 58,7 68,7
Clamping sleeve 323791 323792 323793 323794 323795 323796 323797 323798 323799 323800 323801
Work stop 315128 315129 315130 315131 315132 315133 315134 315135 315136 315137 315138
Min-Ø mm 14,5 17 22 49,7 59,7 69,7
Clamping sleeve 323802 323803 323804 323805 323806 323807
Work stop 315129 315130 315131 315136 315137 315138
Min-Ø mm 17,5 22,5 50,7 60,7 70,7
Clamping sleeve 323809 323810 323811 323812 323813
Work stop 315130 315131 315136 315137 315138
Min-Ø mm 18 23 51,7 61,7 71,7
Clamping sleeve 323815 323816 323817 323818 323819
Work stop 315130 315131 315136 315137 315138
Min-Ø mm 18,5 23,5 52,7 62,7 72,7
Clamping sleeve 323821 323822 323823 323824 323825
Work stop 315130 315131 315136 315137 315138
Min-Ø mm 19 24 53,7 63,7 73,7
Clamping sleeve 323827 323828 323829 323830 323831
Work stop 315130 315131 315136 315137 315138
Min-Ø mm 24,5 74,7
Clamping sleeve 323833 323808
Work stop 315131 315138
Min-Ø mm 75,7
Clamping sleeve 323814
Work stop 315138
Min-Ø mm 76,7
Clamping sleeve 323820
Work stop 315138
Min-Ø mm 77,7
Clamping sleeve 323826
Work stop 315138
Min-Ø mm 78,7
Clamping sleeve 323832
Work stop 315138
Deviating clamping Ø as well as profiled clamping sleeves available on request
www.eshop.roehm.biz
Acc
esso
ries
MZ
B
7032
Cartridge Mandrel
MZE - for long clamping lengths, manually actuated
on request
APPLICATIONInternal clamping of round workpieces. Measuring operations and light grinding operations.Ideal for long clamping lengths / long workpieces.
TYPEManually actuated.Available as clamping mandrel assortment for various clamping diameters.Clamping sleeve separatly available.
CUSTOMER BENEFITS Quick change of clamping sleeve without tools High concentricity and repeatability High flexibility thanks to mount on the shaft or between points Short retrofitting times
TECHNICAL FEATURES- Hardened, low-wear design
MZE = manually actuated, centre hole, E-type
C18
MZE basic mandrel, hand-operated with centre hole, for internal clamping
MZE 00 MZE 01 MZE 02 MZE 03 MZE 04 MZE 05 MZE 06 MZE 07 MZE 08 MZE 09 MZE 10 MZE 11 MZE 12 MZE 13 MZE 14 MZE 15
Basic mandrel 315000 315001 315002 315003 315004 315005 315006 315007 315008 315009 315010 315011 315012 315013 315014 315015
Min-Ø unclamped from mm 8 10 12 14 16 19 22 25 35 45 55 68 80 105 135 185
Min-Ø unclamped to mm 9 11 13 15 18 21 24 34 44 54 65 80 100 135 180 230
Clamping-Ø max, mm 10,5 12,5 15 17 20 23 26 37 47 59 70 85 105 140 185 235
Ø A 8 10 12 14 16 19 21 25 33 45 53 64 76 99 124 145,5
Ø B mm 4,1 5,3 5,7 6,9 8,5 10,7 12,2 14,6 22,6 31,1 38 48,2 60,9 80,4 97,4 122,4
E 40 45 60 70 70 80 80 100 100 125 135 150 150 170 180 200
F 3 3 4 4 4 4 4 4 5 5 5 5 5 5 82 63
L 75 110 125 140 150 170 175 225 225 300 330 350 350 400 442 443
www.eshop.roehm.biz
Car
trid
ge
Man
dre
l M
ZE
7033
Cartridge Mandrel
Accessories MZE
on request
C 18
Clamping sleeve Type E - for basic mandrel MZEFor size MZE 00 MZE 01 MZE 02 MZE 03 MZE 04 MZE 05 MZE 06 MZE 07 MZE 08 MZE 09 MZE 10 MZE 11 MZE 12 MZE 13 MZE 14 MZE 15
Expansion in Ø mm 1,5 1,5 2 2 2 2 2 3 3 5 5 5 5 5 5 5
Total length E mm 40 45 60 70 70 80 80 100 100 125 135 150 150 170 180 200
Min-Ø mm 8 10 12 14 16 19 22 25 35 45 55 68 105 135 185
Clamping sleeve 315016 315017 315018 315019 315020 315021 315022 315023 315024 315025 315026 315027 315029 315030 315031
Min-Ø mm 9 11 13 15 17 20 23 26 36 48 58 70 80 110 140 190
Clamping sleeve 315032 315033 315034 315035 315036 315037 315038 315039 315040 315041 315042 315043 315028 315045 315046 315047
Min-Ø mm 18 21 24 28 38 50 60 72 85 115 145 195
Clamping sleeve 315048 315049 315050 315051 315052 315053 315054 315055 315044 315057 315058 315059
Min-Ø mm 30 40 52 62 75 90 120 150 200
Clamping sleeve 315060 315061 315062 315063 315064 315056 315066 315067 315068
Min-Ø mm 32 42 54 65 78 95 125 155 205
Clamping sleeve 315069 315070 315071 315072 315073 315065 315075 315076 315077
Min-Ø mm 34 44 80 100 130 160 210
Clamping sleeve 315078 315079 315080 315074 315081 315082 315083
Min-Ø mm 135 165 215
Clamping sleeve 315084 315085 315086
Min-Ø mm 170 220
Clamping sleeve 315087 315088
Min-Ø mm 175 225
Clamping sleeve 315089 315090
Min-Ø mm 180 230
Clamping sleeve 315091 315092
Deviating clamping Ø as well as profiled and vulcanized clamping sleeves available on request
www.eshop.roehm.biz
Acc
esso
ries
MZ
E
7034
Product ranges in wooden box size 1 – ID 315093
CONTENT
Consisting of 5 basic mandrels 02 - 06 and 7 clamping sleeves
in the clamping range 12-26, Ø 12-14-16-18-20-22-24 mm.
Product range in wooden box size 2 – ID 315094
CONTENT
Consisting of 3 basic mandrels 07 - 09 and 6 clamping sleeves
in the clamping range 25-55, Ø 25-30-35-40-45-50 mm.
Cartridge Mandrel
Product ranges MZE cartridge mandrel
www.eshop.roehm.biz
Pro
duc
t ra
nges
MZ
E
7035
Cartridge mandrel KFS clamping-Ø 22.65 mm
APPLICATION
Turning
Clamping mandrel in special version due to required freedom of the
tool. The clamping is done in the root circle of the toothing using a
diagonally slotted clamping sleeve. Tilting in the toothing is preven-
ted by the angled slotting.
CUSTOMER BENEFITS
Optimal clamping of the toothed workpiece
High concentricity and run-out precision of 0.02 mm
Cartridge mandrel KFS clamping-Ø SW 27.8 mm
APPLICATION
Turning
The clamping is done using a hexagonal clamping sleeve with axial
pull via the draw bar against a fixed stop. The workpiece stop is
designed of a two-sided loading of the workpiece.
CUSTOMER BENEFITS
Clamping of special contours is possible
Concentricity of 0.05 mm
Cartridge mandrel KFS clamping-Ø 34.3 mm
APPLICATION
Turning / Cutting
Cartridge mandrel force-actuated with axial pull and fixed stop.
Clamping sleeve profiled for cutting off of the workpieces.
CUSTOMER BENEFITS
Low-cost production of small parts
Concentricity of 0.01 mm
Cartridge Mandrel
Special solutions KFS
www.eshop.roehm.biz
Sp
ecia
l so
lutio
ns
7036
Cartridge mandrel KFR clamping-Ø 45 mm
APPLICATION
Turning of a pressed part
Force-actuated cartridge mandrel actuated via draw bar.
Clamping mandrel is designed for different workpieces.
Fixed stop with damping ring, air sensing and ejector.
CUSTOMER BENEFITS
Can be easily reconfigured to other clamping diameters by
changing of clamping sleeve and/or stop
Concentricity of 0.01 mm
Cartridge mandrel KFR clamping-Ø TK-Ø 90 mm
APPLICATION
Turning
Force-actuated cartridge mandrel with toothed clamping sleeve
for clamping in the tooth flanks. Vulcanized collet sleeve with quick
change system.
CUSTOMER BENEFITS
Concentricity for toothing
Concentricity of 0.03 mm
Cartridge mandrel KFR clamping-Ø 136 mm
APPLICATION
Turning of brake discs
Force-actuated cartridge mandrel actuated via draw bar. Sealed
against penetration of chips. Fixed stop with air sensing.
CUSTOMER BENEFITS
Stable version of the clamping mandrel
Concentricity of 0.02 mm
Cartridge mandrel MFR clamping-Ø 88 mm
APPLICATION
Milling / drilling for stationary use on clamping devices
Cartridge mandrel in special version with manual actuation.
The actuation is done via the hexagon socket.
CUSTOMER BENEFITS
Simple actuation by light roller bearing
Concentricity of 0.015 mm
Cartridge Mandrel
Special solutions KFR / MFR
www.eshop.roehm.biz
Sp
ecia
l so
lutio
ns
7037
Cartridge mandrel KFB clamping-Ø 42 mm
APPLICATION
Turning
Clamping of the workpiece with axial tension against the stop.
Clamping mandrel is hermetically sealed against penetration by dirt
and cooling water. The stop and clamping sleeve can be replaced
together using the quick change system.
CUSTOMER BENEFITS
Fast adjustment to different workpieces thanks to the quick
change system
Concentricity of 0.015 mm
Cartridge mandrel KFB clamping-Ø 114 mm
APPLICATION
Turning
Clamping is done via draw bar with axial tension against the fixed
stop. Idle stroke enables simpler stroke control in the clamping
cylinder. The workpiece stop can be replaced quickly using the
bayonet system.
CUSTOMER BENEFITS
Simple handling
Stable clamping using axial pull
Concentricity of 0.01 mm
Cartridge Mandrel
Special solutions KFB
www.eshop.roehm.biz
Sp
ecia
l so
lutio
ns
7038
INNOVATIVE VULCANISATE IN THE SEGMENT CLAMPING SLEEVE
Segment clamping sleeve with innovative
vulcanisate for great elongation, longest service
life and vibration dampening
Hardened and ground steel segments for high
resistance to wear
Video ABSIS Video AGILIS
www.eshop.roehm.biz
7039
SEGMENT CLAMPING MANDREL
ADVANTAGES AT A GLANCE
Modern manufacturing technology can hardly do without the use of segment clamping mandrels.
In the fields of precision machining, turning, grinding, gear cutting and checking, segment clamping
mandrels assume important tasks that are associated with challenging conditions. The innovative
rubber segments enable a great elongation of the clamping sleeve to 1.2 mm.
Patented quick change
system for quick change of
segment sleeves and the
workpiece stop
Segment clamping sleeve with
innovative vulcanisate for great
elongation, longest service life
and vibration dampening
Short tooling and non-productive times thanks to the great elongation of the clamping sleeve up to 1.2 mm
Vibration dampening and long service life thanks to innovative vulcanisate of the clamping sleeves
Fast replacement of the clamping mandrel thanks to the patented bayonet quick change system
Low weight and reduced
overall height by a compact
design
Workpiece stop with prepared
air sensing
Seg
men
t cl
amp
ing
m
and
rel
www.eshop.roehm.biz
7040
Seg
men
t cl
amp
ing
m
and
rel A
BS
IS
Segment clamping mandrel
on request
APPLICATIONInternal clamping of round workpieces. Turning, milling, grinding and toothing operations, as well as for balancing and measuring.Ideal for clamping in through holes.
TYPEForce-actuated.
CUSTOMER BENEFITS Short setup and non-productive times thanks to great expansion of the segment
sleeves Vibration damping due to high vulcanized rubber component of the clamping
sleeves Sturdy clamping of the workpiece thanks to axial tension against the workpiece
stop Fast change of segment sleeves thanks to central clamping screw High concentricity, axial run-out and repeatability
TECHNICAL FEATURES- Manual lubrication- Air sensing prepared
ABSIS = in Latin: segment
C 18
ABSIS segment clamping mandrel, power-operated with flanged seat, for internal clamping
Consisting of basic mandrel, adapter, ejector ring, locking belt
ABSIS 00 ABSIS 01 ABSIS 02 ABSIS 03 ABSIS 04
Segment clamping mandrel 1110000 1110001 1110002 1110003 1110004
Basic mandrel 1110100 1110101 1110102 1110103 1110104
Adapter power-operated 1110040 1110041 1110042 1110043 1110044
Ejector ring 1110020 1110021 1110022 1110023 1110024
Locking bolt 1110060 1110061 1110062 1110063 1110064
F max, in kN 7 10 20 25 30
Max, total clamping force approx, kN 32 46 92 115 138
D Min-Ø unclamped from mm 19,7 25,7 35,7 50,7 72,7
D Min-Ø unclamped to mm 27,7 38,7 54,7 81,7 105,7
Clamping-Ø max, mm 29 40 56 83 107
S mm 23 27 44 50 60
Ø F mm 58 58 72 90 120
Ø G M6x0,75 M10x1 M14x1 M18x1 M20x1
H mm 55 55 58 58,5 60
J mm 75 75 82,5 84,5 86
K mm 98 102 126,3 134,5 146
L mm 103,5 108,5 136,5 146,5 160
ABSIS - for long clamping lengths, with axial tightening
www.eshop.roehm.biz
7041
Acc
esso
ries
AB
SIS
Segment clamping mandrel
Accessories ABSIS
on request
C 18
Segment clamping sleeve - standard design
ABSIS 00 ABSIS 01 ABSIS 02 ABSIS 03 ABSIS 04
Expansion in Ø mm 1,2 1,2 1,2 1,2 1,2
Total length E mm 23 27 44 50 60
Min-Ø mm 19,7 25,7 35,7 50,7 72,7
Segment sleeve 1111400 1111409 1111423 1111443 1111475
Work stop 1110070 1110071 1110072 1110073 1110074
Min-Ø mm 20,7 26,7 36,7 51,7 73,7
Segment sleeve 1111401 1111410 1111424 1111444 1111476
Work stop 1110070 1110071 1110072 1110073 1110074
Min-Ø mm 21,7 27,7 37,7 52,7 74,7
Segment sleeve 1111402 1111411 1111425 1111445 1111477
Work stop 1110070 1110071 1110072 1123341 1123372
Min-Ø mm 22,7 28,7 38,7 53,7 75,7
Segment sleeve 1111403 1111412 1111426 1111446 1111478
Work stop 1110070 1110071 1110072 1123342 1123373
Min-Ø mm 23,7 29,7 39,7 54,7 76,7
Segment sleeve 1111404 1111413 1111427 1111447 1111479
Work stop 1110070 1110071 1110072 1123343 1123374
Min-Ø mm 24,7 30,7 40,7 55,7 77,7
Segment sleeve 1111405 1111414 1111428 1111448 1111480
Work stop 1110070 1110071 1110072 1123344 1123375
Min-Ø mm 25,7 31,7 41,7 56,7 78,7
Segment sleeve 1111406 1111415 1111429 1111449 1111481
Work stop 1110070 1110071 1110072 1123345 1123376
Min-Ø mm 26,7 32,7 42,7 57,7 79,7
Segment sleeve 1111407 1111416 1111430 1111450 1111482
Work stop 1123305 1110071 1123327 1123346 1123377
Min-Ø mm 27,7 33,7 43,7 58,7 80,7
Segment sleeve 1111408 1111417 1111431 1111451 1111483
Work stop 1123306 1123315 1123328 1123347 1123378
Min-Ø mm 34,7 44,7 59,7 81,7
Segment sleeve 1111418 1111432 1111452 1111484
Work stop 1123316 1123329 1123348 1123379
Min-Ø mm 35,7 45,7 60,7 82,7
Segment sleeve 1111419 1111433 1111453 1111485
Work stop 1123317 1123330 1123349 1123380
Min-Ø mm 36,7 46,7 61,7 83,7
Segment sleeve 1111420 1111434 1111454 1111486
Work stop 1123318 1123331 1123350 1123381
Min-Ø mm 37,7 47,7 62,7 84,7
Segment sleeve 1111421 1111435 1111455 1111487
Work stop 1123319 1123332 1123351 1123382
Min-Ø mm 38,7 48,7 63,7 85,7
Segment sleeve 1111422 1111436 1111456 1111488
Work stop 1123320 1123333 1123352 1123383
Min-Ø mm 49,7 64,7 86,7
Segment sleeve 1111437 1111457 1111489
Work stop 1123334 1123353 1123384
Min-Ø mm 50,7 65,7 87,7
Segment sleeve 1111438 1111458 1111490
Work stop 1123335 1123354 1123385
Min-Ø mm 51,7 66,7 88,7
Segment sleeve 1111439 1111459 1111491
Work stop 1123336 1123355 1123386
www.eshop.roehm.biz
7042
Acc
esso
ries
AB
SIS
Segment clamping mandrel
Accessories ABSIS
on request
C 18
Segment clamping sleeve - standard design
ABSIS 00 ABSIS 01 ABSIS 02 ABSIS 03 ABSIS 04
Expansion in Ø mm 1,2 1,2 1,2 1,2 1,2
Total length E mm 23 27 44 50 60
Min-Ø mm 52,7 67,7 89,7
Segment sleeve 1111440 1111460 1111492
Work stop 1123337 1123356 1123387
Min-Ø mm 53,7 68,7 90,7
Segment sleeve 1111441 1111461 1111493
Work stop 1123338 1123357 1123388
Min-Ø mm 54,7 69,7 91,7
Segment sleeve 1111442 1111462 1111494
Work stop 1123339 1123358 1123389
Min-Ø mm 70,7 92,7
Segment sleeve 1111463 1111495
Work stop 1123359 1123390
Min-Ø mm 71,7 93,7
Segment sleeve 1111464 1111496
Work stop 1123360 1123391
Min-Ø mm 72,7 94,7
Segment sleeve 1111465 1111497
Work stop 1123361 1123392
Min-Ø mm 73,7 95,7
Segment sleeve 1111466 1111498
Work stop 1123362 1123393
Min-Ø mm 74,7 96,7
Segment sleeve 1111467 1111499
Work stop 1123363 1123394
Min-Ø mm 75,7 97,7
Segment sleeve 1111468 1111500
Work stop 1123364 1123395
Min-Ø mm 76,7 98,7
Segment sleeve 1111469 1111501
Work stop 1123365 1123396
Min-Ø mm 77,7 99,7
Segment sleeve 1111470 1111502
Work stop 1123366 1123397
Min-Ø mm 78,7 100,7
Segment sleeve 1111471 1111503
Work stop 1123367 1123398
Min-Ø mm 79,7 101,7
Segment sleeve 1111472 1111504
Work stop 1123368 1123399
Min-Ø mm 80,7 102,7
Segment sleeve 1111473 1111505
Work stop 1123369 1123400
Min-Ø mm 81,7 103,7
Segment sleeve 1111474 1111506
Work stop 1123370 1123401
Min-Ø mm 104,7
Segment sleeve 1111507
Work stop 1123402
Min-Ø mm 105,7
Segment sleeve 1111508
Work stop 1123403
www.eshop.roehm.biz
7043
Acc
esso
ries
AB
SIS
Segment clamping mandrel
Accessories ABSIS
on request
C 18
Intermediate flange ISO 702-1 (DIN 55028), for size 00-04
Nr. 5 (A 05) Nr. 6 (A 06) Nr. 8 (A 08) Nr. 11 (A 11)
Intermediate flange 1110005 1110006 1110008 1110011
Ø A mm 165 170 220 282
Ø B mm 82,563 106,375 139,719 196,869
Ø C mm 104,8 133,4 171,4 235
Thread-Ø M M10 M12 M16 M20
Ø O mm 16,3 19,45 24,2 29,4
P mm 36 38 45 45
www.eshop.roehm.biz
7044
Acc
esso
ries
AB
SIS
Segment clamping mandrel
Accessories ABSIS
on request
APPLICATIONFor manual clamping device exchange in a minimum of time.
TYPEManual quick-change system for clamping devices.Fits for ABSIS (269-00) and AGILIS (296-00).Central lubrication and/or air sensing control possible.
CUSTOMER BENEFITS Manual clamping devices change in about 30 seconds High change precision within 0.005 mm Quick change of different clamping devices with short time, similar to the auto-
matic or semiautometic clamping devices changing systems
TECHNICAL FEATURES- Quick-change system suitable due to recording RMS see quick-change system
RMS (Product Group 6)- Corresponds to the guidelines of the Employer‘s Liability Insurance Association in
combination with RÖHM safety clamping cylinder OVS and LVS
C18
RMS quick-change system, hand-operated for clamping devices
KK 06 KK 08
RMS - complete (flange incl. quick-clamping screw)
1160028 1160029
Adapters RMS 1183312 1183313
A 38 45
Ø B 170 220
Ø C 133,4 171,4
Ø D 106,375 139,719
Ø E mm M8 M8
Ø F mm 139 H7 139 H7
Indermediate flange
Adapters RMS
Quick-clamping screw
RMS
www.eshop.roehm.biz
7045
Seg
men
t cl
amp
ing
m
and
rel A
GIL
IS
Segment clamping mandrel
AGILIS - for short clamping lengths, with axial tightening
on request
APPLICATIONInternal clamping of round workpieces. Turning, milling, grinding and toothing operations, as well as for balancing and measuring.Suitable for short clamping lengths and very small clamping diameters starting from 10 mm.
TYPEForce-actuated.
CUSTOMER BENEFITS Short setup and non-productive times thanks to great expansion of the segment
sleeves Vibration damping due to high vulcanized rubber component of the clamping
sleeves Sturdy clamping of the workpiece thanks to axial tension against the workpiece
stop Fast change thanks to bayonet catch High concentricity, axial run-out and repeatability
TECHNICAL FEATURES- Manual lubrication- Air sensing prepared
AGILIS = in Latin: movable
C 18
AGILIS segment clamping mandrel, power-operated with flanged seat, for internal clamping
AGILIS 00 AGILIS 01 AGILIS 02 AGILIS 03 AGILIS 04 AGILIS 05 AGILIS 06 AGILIS 07
Segment clamping mandrel 1180000 1180001 1180002 1180003 1180004 1180005 1180006 1180007
Basic mandrel 1180010 1180011 1180012 1180013 1180014 1180015 1180016 1180017
Adapter power-operated 1180030 1180030 1180032 1180032 1180034 1180035 1180036 1180037
Bolt spacer 1180060 1180060 1180062 1180063 1180064 1180065 1180066 1180066
Retaining ring 1180050 1180050 1180052 1180052 1180054 1180055 1180056 1180057
F max, in kN 5 7,5 15 20 25 30 35 35
Max, total clamping force approx, kN 26 39 79 85 106 127 149 149
Min-Ø unclamped from mm 9,7 13,7 18,7 26,7 36,7 53,7 71,7 94,7
Min-Ø unclamped to mm 15,7 24,7 34,7 44,7 64,7 84,7 104,7 129,7
Pitch diameter A mm 54 54 69 69 88 108 127 152
Guide diameter B mm 42 42 56 56 75 96 114 135
Ø C mm 68 68 82 82 101 122 140 169
Ø D mm 12 12 17 17 17
Ø E mm M 16 M 16 M 24x1 M 24x1 M 24x1
S max, mm 16,8 18,8 23,8 28,1 42,1 46,1 57,1 67,1
T mm 27,7 27,7 25,4 26,4 26,4
U mm 17,7 17,7 15,4 16,4 16,4
V mm 4,3 4,3 6,6 5,6 5,6
W mm 41,5 41,5 52 51 52 47 49 49
X mm 46,5 46,5 57,2 56 57 52 54 54
Y min, mm 80 80 103 103 108 105 109 109
Z mm 96,8 98,8 126,8 131,1 150,1 151,1 166,1 176,1
www.eshop.roehm.biz
7046
Acc
esso
ries
AG
ILIS
Segment clamping mandrel
Accessories AGILIS
on request
C18
Segment clamping sleeves AGILIS
AGILIS 00 AGILIS 01 AGILIS 02 AGILIS 03 AGILIS 04 AGILIS 05 AGILIS 06 AGILIS 07
Expansion in Ø mm 0,6 0,6 0,6 1,2 1,2 1,2 1,2 1,2
Total length L 38 40 52,5 57 76 82 95 105
Min-Ø mm 9,7 13,7 18,7 26,7 36,7 53,7 71,7 94,7
Segment sleeve 1180100 1180120 1180140 1180170 1180190 1180220 1180250 1180290
Work stop 1180400 1180420 1180440 1180470 1180490 1180520 1180550 1180590
Min-Ø mm 10,2 14,2 19,2 27,7 37,7 54,7 72,7 95,7
Segment sleeve 1180101 1180121 1180141 1180171 1180191 1180221 1180251 1180291
Work stop 1180401 1180421 1180441 1180471 1180491 1180521 1180551 1180591
Min-Ø mm 10,7 14,7 19,7 28,7 38,7 55,7 73,7 96,7
Segment sleeve 1180102 1180122 1180142 1180172 1180192 1180222 1180252 1180292
Work stop 1180402 1180422 1180442 1180472 1180492 1180522 1180552 1180592
Min-Ø mm 11,2 15,2 20,2 29,7 39,7 56,7 74,7 97,7
Segment sleeve 1180103 1180123 1180143 1180173 1180193 1180223 1180253 1180293
Work stop 1180403 1180423 1180443 1180473 1180493 1180523 1180553 1180593
Min-Ø mm 11,7 15,7 20,7 30,7 40,7 57,7 75,7 98,7
Segment sleeve 1180104 1180124 1180144 1180174 1180194 1180224 1180254 1180294
Work stop 1180404 1180424 1180444 1180474 1180494 1180524 1180554 1180594
Min-Ø mm 12,2 16,2 21,2 31,7 41,7 58,7 76,7 99,7
Segment sleeve 1180105 1180125 1180145 1180175 1180195 1180225 1180255 1180295
Work stop 1180405 1180425 1180445 1180475 1180495 1180525 1180555 1180595
Min-Ø mm 12,7 16,7 21,7 32,7 42,7 59,7 77,7 100,7
Segment sleeve 1180106 1180126 1180146 1180176 1180196 1180226 1180256 1180296
Work stop 1180406 1180426 1180446 1180476 1180496 1180526 1180556 1180596
Min-Ø mm 13,2 17,2 22,2 33,7 43,7 60,7 78,7 101,7
Segment sleeve 1180107 1180127 1180147 1180177 1180197 1180227 1180257 1180297
Work stop 1180407 1180427 1180447 1180477 1180497 1180527 1180557 1180597
Min-Ø mm 13,7 17,7 22,7 34,7 44,7 61,7 79,7 102,7
Segment sleeve 1180108 1180128 1180148 1180178 1180198 1180228 1180258 1180298
Work stop 1180408 1180428 1180448 1180478 1180498 1180528 1180558 1180598
Min-Ø mm 14,2 18,2 23,2 35,7 45,7 62,7 80,7 103,7
Segment sleeve 1180109 1180129 1180149 1180179 1180199 1180229 1180259 1180299
Work stop 1180409 1180429 1180449 1180479 1180499 1180529 1180559 1180599
Min-Ø mm 14,7 18,7 23,7 36,7 46,7 63,7 81,7 104,7
Segment sleeve 1180110 1180130 1180150 1180180 1180200 1180230 1180260 1180300
Work stop 1180410 1180430 1180450 1180480 1180500 1180530 1180560 1180600
Min-Ø mm 15,2 19,2 24,2 37,7 47,7 64,7 82,7 105,7
Segment sleeve 1180111 1180131 1180151 1180181 1180201 1180231 1180261 1180301
Work stop 1180411 1180431 1180451 1180481 1180501 1180531 1180561 1180601
Min-Ø mm 15,7 19,7 24,7 38,7 48,7 65,7 83,7 106,7
Segment sleeve 1180112 1180132 1180152 1180182 1180202 1180232 1180262 1180302
Work stop 1180412 1180432 1180452 1180482 1180502 1180532 1180562 1180602
Min-Ø mm 20,2 25,2 39,7 49,7 66,7 84,7 107,7
Segment sleeve 1180133 1180153 1180183 1180203 1180233 1180263 1180303
Work stop 1180433 1180453 1180483 1180503 1180533 1180563 1180603
Min-Ø mm 20,7 25,7 40,7 50,7 67,7 85,7 108,7
Segment sleeve 1180134 1180154 1180184 1180204 1180234 1180264 1180304
Work stop 1180434 1180454 1180484 1180504 1180534 1180564 1180604
Min-Ø mm 21,2 26,2 41,7 51,7 68,7 86,7 109,7
Segment sleeve 1180135 1180155 1180185 1180205 1180235 1180265 1180305
Work stop 1180435 1180455 1180485 1180505 1180535 1180565 1180605
www.eshop.roehm.biz
7047
Acc
esso
ries
AG
ILIS
Segment clamping mandrel
Accessories AGILIS
on request
C18
Segment clamping sleeves AGILIS
AGILIS 00 AGILIS 01 AGILIS 02 AGILIS 03 AGILIS 04 AGILIS 05 AGILIS 06 AGILIS 07
Expansion in Ø mm 0,6 0,6 0,6 1,2 1,2 1,2 1,2 1,2
Total length L 38 40 52,5 57 76 82 95 105
Min-Ø mm 21,7 26,7 42,7 52,7 69,7 87,7 110,7
Segment sleeve 1180136 1180156 1180186 1180206 1180236 1180266 1180306
Work stop 1180436 1180456 1180486 1180506 1180536 1180566 1180606
Min-Ø mm 22,2 27,2 43,7 53,7 70,7 88,7 111,7
Segment sleeve 1180137 1180157 1180187 1180207 1180237 1180267 1180307
Work stop 1180437 1180457 1180487 1180507 1180537 1180567 1180607
Min-Ø mm 22,7 27,7 44,7 54,7 71,7 89,7 112,7
Segment sleeve 1180138 1180158 1180188 1180208 1180238 1180268 1180308
Work stop 1180438 1180458 1180488 1180508 1180538 1180568 1180608
Min-Ø mm 23,2 28,2 55,7 72,7 90,7 113,7
Segment sleeve 1180139 1180159 1180209 1180239 1180269 1180309
Work stop 1180439 1180459 1180509 1180539 1180569 1180609
Min-Ø mm 23,7 28,7 56,7 73,7 91,7 114,7
Segment sleeve 1180350 1180160 1180210 1180240 1180270 1180310
Work stop 1180630 1180460 1180510 1180540 1180570 1180610
Min-Ø mm 24,2 29,2 57,7 74,7 92,7 115,7
Segment sleeve 1180351 1180161 1180211 1180241 1180271 1180311
Work stop 1180631 1180461 1180511 1180541 1180571 1180611
Min-Ø mm 24,7 29,7 58,7 75,7 93,7 116,7
Segment sleeve 1180352 1180162 1180212 1180242 1180272 1180312
Work stop 1180632 1180462 1180512 1180542 1180572 1180612
Min-Ø mm 30,2 59,7 76,7 94,7 117,7
Segment sleeve 1180163 1180213 1180243 1180273 1180313
Work stop 1180463 1180513 1180543 1180573 1180613
Min-Ø mm 30,7 60,7 77,7 95,7 118,7
Segment sleeve 1180164 1180214 1180244 1180274 1180314
Work stop 1180464 1180514 1180544 1180574 1180614
Min-Ø mm 31,2 61,7 78,7 96,7 119,7
Segment sleeve 1180165 1180215 1180245 1180275 1180315
Work stop 1180465 1180515 1180545 1180575 1180615
Min-Ø mm 31,7 62,7 79,7 97,7 120,7
Segment sleeve 1180166 1180216 1180246 1180276 1180316
Work stop 1180466 1180516 1180546 1180576 1180616
Min-Ø mm 32,2 63,7 80,7 98,7 121,7
Segment sleeve 1180167 1180217 1180247 1180277 1180317
Work stop 1180467 1180517 1180547 1180577 1180617
Min-Ø mm 32,7 64,7 81,7 99,7 122,7
Segment sleeve 1180168 1180218 1180248 1180278 1180318
Work stop 1180468 1180518 1180548 1180578 1180618
Min-Ø mm 33,2 82,7 100,7 123,7
Segment sleeve 1180169 1180249 1180279 1180319
Work stop 1180469 1180549 1180579 1180619
Min-Ø mm 33,7 83,7 101,7 124,7
Segment sleeve 1180360 1180370 1180280 1180320
Work stop 1180640 1180650 1180580 1180620
Min-Ø mm 34,2 84,7 102,7 125,7
Segment sleeve 1180361 1180371 1180281 1180321
Work stop 1180641 1180651 1180581 1180621
Min-Ø mm 34,7 103,7 126,7
Segment sleeve 1180362 1180282 1180322
Work stop 1180642 1180582 1180622
Min-Ø mm 104,7 127,7
Segment sleeve 1180283 1180323
Work stop 1180583 1180623
Min-Ø mm 128,7
Segment sleeve 1180324
Work stop 1180624
Min-Ø mm 129,7
Segment sleeve 1180325
Work stop 1180625
www.eshop.roehm.biz
7048
Acc
esso
ries
AG
ILIS
Segment clamping mandrel
Accessories AGILIS
on request
C 18
Intermediate flange ISO 702-1 (DIN 55028), for size 00-04
Nr. 5 (A 05) Nr. 6 (A 06) Nr. 8 (A 08) Nr. 11 (A 11)
Intermediate flange 1110005 1110006 1110008 1110011
Ø A mm 165 170 220 282
Ø B 82,563 106,375 139,719 196,869
Ø C mm 104,8 133,4 171,4 235
Thread-Ø M M10 M12 M16 M20
Ø O mm 16,3 19,45 24,2 29,4
P mm 36 38 45 45
C 18
Intermediate flange ISO 702-1 (DIN 55028)
Nr. 5 (A5) Nr. 6 (A6) Nr. 8 (A8)
Intermediate flange 1072115 1072117 1072119
For KZF-S 80/AGILIS 05-07 KZF-S 120/AGILIS 05-07 KZF-S 120/AGILIS 05-07
Short-taper-Ø B 82,563 106,375 139,719
Short-taper pitch circle Ø C 104,8 133,4 171,4
Flange outer-Ø A 220 220 220
Ø D 135 135 135
Ø F mm 186 186 186
Ø O mm 16,3 19,45 24,2
Thread-Ø M M10 M12 M16
Total length flange P 40 40 40
www.eshop.roehm.biz
7049
Acc
esso
ries
AG
ILIS
Segment clamping mandrel
Accessories AGILIS
on request
APPLICATIONFor manual clamping device exchange in a minimum of time.
TYPEManual quick-change system for clamping devices.Fits for ABSIS (269-00) and AGILIS (296-00).Central lubrication and/or air sensing control possible.
CUSTOMER BENEFITS Manual clamping devices change in about 30 seconds High change precision within 0.005 mm Quick change of different clamping devices with short time, similar to the auto-
matic or semiautometic clamping devices changing systems
TECHNICAL FEATURES- Quick-change system suitable due to recording RMS see quick-change system
RMS (Product Group 6)- Corresponds to the guidelines of the Employer‘s Liability Insurance Association in
combination with RÖHM safety clamping cylinder OVS and LVS
C18
RMS quick-change system, hand-operated for clamping devices
A 06 A 08
For AGILIS 00-04 296-00 AGILIS 00-04 296-00
RMS - complete (flange incl. quick-clamping screw)
1180340 1180342
Adapters RMS 1183314 1183314
A 38 45
Ø B 170 215
Ø C 133,4 171,4
Ø D 106,375 139,719
Ø E mm M12 M16
Ø F mm 139 H7 139 H7
Matching intermediate pieces RMS KK6 and RMS KK8 can be found directly in the product table of the segment clamping mandrel AGILIS
Indermediate flange
Adapters RMS
Quick-clamping screwRMS
www.eshop.roehm.biz
7050
Seg
men
t cl
amp
ing
m
and
rel K
FR
/MF
R
Segment clamping mandrel
KFR-SE - without axial tightening, force-actuated
on request
APPLICATIONInternal clamping of round workpieces. Turning, grinding and toothing operations, as well as for balancing and measuring.
TYPEForce-actuated. Ideal for short clamping lengths / workpieces.
CUSTOMER BENEFITS Short setup and non-productive times thanks to great expansion of the segment
sleeves Vibration damping due to high vulcanized rubber component of the clamping
sleeves No workpiece tension thanks to def. axial tension against the workpiece stop High concentricity, axial run-out and repeatability
TECHNICAL FEATURES- Integrated lubrication- Air sensing prepared
KFR-SE = force-actuated, flange, R-type, segment sleeve
C18
KFR-SE segment clamping mandrel, power-operated with flanged seat, for internal clamping
Consisting of basic body, clamping taper, intermediate piece, nut
KFR 00 KFR 01 KFR 02 KFR 03 KFR 04 KFR 05 KFR 06 KFR 07 KFR 08 KFR 09 KFR 10 KFR 11 KFR 12
Segment clamping mandrel 1171410 1171411 1171412 1171413 1171414 1171415 893966 893967 893968 893969 893970 893971 893972
Base bolt 893800 893801 893802 893803 893804 893805 893806 893807 893807 893809 893809 893809 893809
Clamping taper 1171436 1171437 1171438 1171439 1171440 1171441 650346 650347 650348 650349 650350 650351 650352
Adapter power-operated 1199848 1199849 1199850 893819 893820 893820 893821 893822 893822 893822 893822 893822 893822
Nut 893814 893814 893814
F max, in kN 4,65 13,1 19,5 24,4 26,8 33 33 33 33 33 33 33 33
Max, total clamping force
approx, kN
20 56 83 104 114 140 140 140 140 140 140 140 140
Min-Ø unclamped from mm 14,2 19,7 24,7 35,7 40,7 50,7 60,7 70,7 80,7 90,7 100,7 110,7 120,7
Min-Ø unclamped to mm 19,7 24,7 35,7 40,7 50,7 60,7 70,7 80,7 90,7 100,7 110,7 120,7 130,7
Clamping-Ø max, mm 20,7 25,7 36,7 41,7 51,7 61,7 71,7 81,7 91,7 101,7 111,7 121,7 131,7
External-Ø A mm 100 100 100 100 130 130 130 160 160 160 160 160 160
Pitch diameter B mm 75 75 75 75 105 105 105 130 130 130 130 130 130
Guide diameter B mm 78 100 100 160 160 160 160
Pitch diameter C mm 85 85 85 85 114 114 114 145 145 148 148 148 148
Ø D mm 50 50 50 50 78 78 78 100 100 160 160 160 160
Ø E mm 70 70 70 70 98 98 98 130 130 175 175 175 175
Ø F mm M10 M10 M10 M10 M10 M10 M10 M12 M12 M12 M12 M12 M12
Ø F mm 98 130 130 175 175 175 175
S mm 21 27 27 27 42 42 57 55 55 63 63 63 63
V mm 21 21 21 21 21 21 21 32 32 12 12 12 12
W mm 33 33 33 33 33 33 33 50 50 68 68 68 68
X mm 39 39 39 39 41 41 41 58 58 83 83 83 83
Y mm 50 52 52 52 54 54 54 73 73 92 92 92 92
Z mm 71 79 79 79 96 96 111 128 128 146 146 146 146
www.eshop.roehm.biz
7051
Seg
men
t cl
amp
ing
m
and
rel K
FR
/MF
R
Segment clamping mandrel
MFR-SE - without axial tightening, manually actuated
on request
APPLICATIONInternal clamping of round workpieces. Turning, grinding and toothing operations, as well as for balancing and measuring.Ideal for short clamping lengths / workpieces.
TYPEManually actuated.With vulcanized claming sleeves / segment sleeves.
CUSTOMER BENEFITS No workpiece tension thanks to def. axial tension against the workpiece stop High concentricity, axial run-out and repeatability Low-maintenance
TECHNICAL FEATURES- Hardened, low-wear design- Integrated lubrication- Air sensing prepared
MFR-SE = manually actuated, flange, R-type, segment sleeve
C18
MFR-SE segment clamping mandrel, hand-operated with flanged seat, for internal clamping
Consisting of basic body, clamping taper, intermediate piece
MFR 00 MFR 01 MFR 02 MFR 03 MFR 04 MFR 05 MFR 06
Segment clamping mandrel 1171423 1171424 1171425 1171426 1171427 1171428 1077706
Base bolt 893800 893801 893802 893803 893804 893805 893806
Clamping taper 1171436 1171437 1171438 1171439 1171440 1171441 650346
Adapter hand-operated 893823 893824 893825 893826 893827 893827 893828
Md max, kN 4 5 20 40 55 60 85
Min-Ø unclamped from mm 14,7 19,7 24,7 35,7 40,7 50,7 60,7
Min-Ø unclamped to mm 19,7 24,7 35,7 40,7 50,7 60,7 70,7
Clamping-Ø max, mm 20,7 25,7 36,7 41,7 51,7 61,7 71,7
External-Ø A mm 100 100 100 100 130 130 130
Pitch diameter B mm 75 75 75 75 105 105 105
Guide diameter B mm 78
Pitch diameter C mm 85 85 85 85 114 114 114
Ø D mm 50 50 50 50 78 78 78
Ø E mm 70 70 70 70 98 98 98
Ø F mm M10 M10 M10 M10 M10 M10 M10
Ø F mm 98
S mm 21 27 27 27 42 42 57
V mm 21 21 21 21 21 21 21
W mm 33 33 33 33 33 33 33
X mm 39 39 39 39 41 41 41
Y mm 50 52 52 52 54 54 54
Z mm 71 79 79 79 96 96 111
www.eshop.roehm.biz
7052
Acc
esso
ries
KF
R-S
E /
M
FR
-SE
Segment clamping mandrel
Accessories KFR-SE / MFR-SE
on request
C18
Segment sleeve KFR-SE / MFR-SE
For size 00 01 02 03 04 05 06 07 08 09 10 11 12
Expansion in Ø mm 1 1 1 1 1 1 1 1 1 1 1 1 1
Total length 32 40 40 40 55 55 70 70 70 78 78 78 78
Min-Ø mm 14,7 19,7 24,7 35,7 40,7 50,7 60,7 70,7 80,7 90,7 100,7 110,7 120,7
Segment sleeve1171000
1171006
1171012
1171024
1171030
1171041
1171052
1171063
1171074
1171085
1171096
1171107
1171118
Work stop 893830 893836 893842 893852 893857 893867 893878 893888 893897 893907 893917 893927 893937
Min-Ø mm 15,7 20,7 25,7 36,7 41,7 51,7 61,7 71,7 81,7 91,7 101,7 111,7 121,7
Segment sleeve1171001
1171007
1171013
1171025
1171031
1171042
1171053
1171064
1171075
1171086
1171097
1171108
1171119
Work stop 893831 893837 893842 893853 893858 893868 893879 893889 893898 893908 893918 893928 893938
Min-Ø mm 16,7 21,7 26,7 37,7 42,7 52,7 62,7 72,7 82,7 92,7 102,7 112,7 122,7
Segment sleeve1171002
1171008
1171014
1171026
1171032
1171043
1171054
1171065
1171076
1171087
1171098
1171109
1171120
Work stop 893832 893838 893843 893854 893859 893869 893880 893890 893899 893909 893919 893929 893939
Min-Ø mm 17,7 22,7 27,7 38,7 43,7 53,7 63,7 73,7 83,7 93,7 103,7 113,7 123,7
Segment sleeve1171003
1171009
1171015
1171027
1171033
1171044
1171055
1171066
1171077
1171088
1171099
1171110
1171121
Work stop 893833 893839 893844 893855 893860 893870 893881 893891 893900 893910 893920 893930 893940
Min-Ø mm 18,7 23,7 28,7 39,7 44,7 54,7 64,7 74,7 84,7 94,7 104,7 114,7 124,7
Segment sleeve1171004
1171010
1171016
1171028
1171034
1171045
1171056
1171067
1171078
1171089
1171100
1171111
1171122
Work stop 893834 893840 893845 893856 893861 893871 893882 893892 893901 893911 893921 893931 893941
Min-Ø mm 19,7 24,7 29,7 40,7 45,7 55,7 65,7 75,7 85,7 95,7 105,7 115,7 125,7
Segment sleeve1171005
1171011
1171017
1171029
1171035
1171046
1171057
1171068
1171079
1171090
1171101
1171112
1171123
Work stop 893835 893841 893846 893856 893862 893872 893883 893893 893902 893912 893922 893932 893942
Min-Ø mm 30,7 46,7 56,7 66,7 76,7 86,7 96,7 106,7 116,7 126,7
Segment sleeve1171018
1171036
1171047
1171058
1171069
1171080
1171091
1171102
1171113
1171124
Work stop 893847 893863 893873 893884 893894 893903 893913 893923 893933 893943
Min-Ø mm 31,7 47,7 57,7 67,7 77,7 87,7 97,7 107,7 117,7 127,7
Segment sleeve1171019
1171037
1171048
1171059
1171070
1171081
1171092
1171103
1171114
1171125
Work stop 893848 893864 893874 893885 893895 893904 893914 893924 893934 893944
Min-Ø mm 32,7 48,7 58,7 68,7 78,7 88,7 98,7 108,7 118,7 128,7
Segment sleeve1171020
1171038
1171049
1171060
1171071
1171082
1171093
1171104
1171115
1171126
Work stop 893849 893865 893875 893886 893947 893905 893915 893925 893935 893945
Min-Ø mm 33,7 49,7 59,7 69,7 79,7 89,7 99,7 109,7 119,7 129,7
Segment sleeve1171021
1171039
1171050
1171061
1171072
1171083
1171094
1171105
1171116
1171127
Work stop 893850 893866 893876 893887 893896 893906 893916 893926 893936 893946
Min-Ø mm 34,7 50,7 60,7 70,7 80,7 90,7 100,7 110,7 120,7 130,7
Segment sleeve1171022
1171040
1171051
1171062
1171073
1171084
1171095
1171106
1171117
1171128
Work stop 893851 893867 893877 893887 893896 893906 893916 893926 893936 893946
Min-Ø mm 35,7
Segment sleeve1171023
Work stop 893852
www.eshop.roehm.biz
7053
APPLICATION
For adaption of cartridge mandrel KFR/MFR/KFR-SE/MFR-SE
or KFS/MFS - on spindle head ISO 702-1 / ISO 702-3 (DIN
55021/55022/55026 and 55027).
TYPE
For KFR/MFR/KFR-SE/MFR-SE or KFS/MFS.
CUSTOMER BENEFITS
By replacement of the Intermediate flange, one cartridge
mandrel can be used on different machines
TECHNICAL FEATURES
Adaptation of mandrel KFR / MFR / KFR-SE / MFR SE or KFS /
MFS on spindle head, with or without adjustment, with or without
operation of air-conditioning control. Execution according to ISO
702-1 (DIN 55028-A) or ISO 702-3 (DIN 55028-C), in size no. 5, no.
6, no. 8, no. 11 or no. 5, no. 6, Nr. 8 (A5, A6, A8, A11 or C5, C6,
C8).
Intermediate flange
Adjusting screw
Segment clamping mandrel
Intermediate flange KFR-SE / MFR-SE
Inte
rmed
iate
fla
nge
KF
R-S
E /
MF
R-S
E
on request www.eshop.roehm.biz
7054
Acc
esso
ries
KF
R-S
E /
M
FR
-SE
Segment clamping mandrel
Accessories KFR-SE / MFR-SE
on request
C 18
Intermediate flange ISO 702-1 (DIN 55026/55021) without adjusting screwsNr. 5 (A 05) Nr. 6 (A 06) Nr. 8 (A 08) Nr. 11 (A 11)
Intermediate flange 893975 893976 893977 893978
Design without air-sensing without air-sensing without air-sensing without air-sensing
Mount-Ø 55 +0,003/+0,001 +0,003/+0,001 +0,003/+0,001 +0,003/+0,001
A mm 45 45 50 50
Ø B 165 170 220 282
Ø C mm 104,8 133,4 171,4 235
Ø D mm 82,563 106,375 139,719 196,869
Ø E M10 M12 M16 M20
Ø F mm 16,3 19,45 24,2 29,4
C 18
Intermediate flange ISO 702-1 (DIN 55028) with adjusting screwNr. 5 (A 05) Nr. 6 (A 06) Nr. 8 (A 08)
Intermediate flange 893979 893980 893981
Design without air-sensing without air-sensing without air-sensing
Mount-Ø 55 +0,05/+0,04 +0,05/+0,04 +0,05/+0,04
A mm 45 45 50
Ø B 165 170 220
Ø C mm 104,8 133,4 171,4
Ø D mm 82,563 106,375 139,719
Ø E M10 M12 M16
Ø F mm 16,3 19,45 24,2
www.eshop.roehm.biz
7055
Acc
esso
ries
KF
R-S
E /
M
FR
-SE
Segment clamping mandrel
Accessories KFR-SE / MFR-SE
on request
C 18
Intermediate flange ISO 702-3 (DIN 55027/55022) without adjusting screwsNr. 5 (C 05) Nr. 6 (C 06) Nr. 8 (C 08)
Intermediate flange 893982 893983 893984
Design without air-sensing without air-sensing without air-sensing
Mount-Ø 55 +0,003/+0,001 +0,003/+0,001 +0,003/+0,001
A mm 45 45 50
Ø B 165 170 220
Ø C mm 104,8 133,4 171,4
Ø D mm 82,563 106,375 139,719
Ø E M 10 M 12 M 16
Ø F mm 16,3 19,45 24,2
C 18
Intermediate flange ISO 702-3 (DIN 55027/55022) with adjusting screwsNr. 5 (C 05) Nr. 6 (C 06) Nr. 8 (C 08)
Intermediate flange 893985 893986 893987
Design without air-sensing without air-sensing without air-sensing
Mount-Ø 55 +0,05/+0,04 +0,05/+0,04 +0,05/+0,04
A mm 45 45 50
Ø B 165 170 220
Ø C mm 104,8 133,4 171,4
Ø D mm 82,563 106,375 139,719
Ø E M 10 M 12 M 16
Ø F mm 16,3 19,45 24,2
www.eshop.roehm.biz
7056
ABSIS Segment clamping mandrel - nominal 38.43 mm
APPLICATION
Cutting, Turning
ABSIS clamping mandrel for clamping on a toothing machine. The
centering is done by the segment clamping sleeve; the clamping by
the pendulum bell. Clamping mandrel with quick change system on
the basic take-up.
CUSTOMER BENEFITS
Stable clamping using axial pull
Concentricity of 0.01 mm
A lot of freedom of the tool (milling coasting)
Designed for wet machining
ABSIS Segment clamping mandrel - nominal 60.5 mm
APPLICATION
Turning
ABSIS clamping mandrel for clamping on a lathe. Clamping
mandrel with quick change system on the basic take-up. Fixed
workpiece stop with air sensing. Clamping screw sunk in the seg-
ment clamping sleeve to ensure the freedom of the tool. Different
clamping mandrel sizes of clamping diameters 25 mm to diameter
105 mm (ABSIS size 00 to size 04).
CUSTOMER BENEFITS
Stable clamping using axial pull
Concentricity of 0.01 mm
Simple changing of the workpiece stop as well as the clamping
sleeves
A lot of freedom of the tool
Sp
ecia
l so
lutio
ns
Segment clamping mandrel
Special solutions ABSIS
www.eshop.roehm.biz
7057
ABSIS Segment clamping mandrel TK-Ø 88 mm
APPLICATION
Turning
ABSIS clamping mandrel for clamp in the toothing. The toothed
segment clamping sleeve clamps the workpiece exactly in the tooth
flanks. The centering disc helps during loading of the workpiece.
Workpiece stop can be pulled back using draw bar with air
sensing.
CUSTOMER BENEFITS
Freedom of tool by stop that can be pulled back
Concentricity of 0.01 mm
ABSIS Segment clamping mandrel Ø 55.33 mm
APPLICATION
Turning of a gear wheel blank
Force-actuated ABSIS standard clamping mandrel with quick chan-
ge system. The stop diameter is far beyond the clamping diameter.
Workpiece stop with air sensing attached on the intermediate
flange.
CUSTOMER BENEFITS
Stable clamping using axial pull
Concentricity of 0.01 mm
Low-cost thanks to standard components
Sp
ecia
l so
lutio
ns
Segment clamping mandrel
Special solutions ABSIS
www.eshop.roehm.biz
7058
FAST CHANGING WITHIN THE MODULAR SYSTEM
As a consistent modular system, it is possible to com-
bine the individual components such as CAPTIS collet
chuck, CAPTIS collet and ABSIS-C clamping mandrel
depending on use.
Collet replacingFast and easy collet replacement in 15 seconds
reduces the set-up times.
Changing collets and clamping mandrel Innovative and patent-pending quick changing function
for fast conversion from outer to inner clamping in less
than one minute.
www.eshop.roehm.biz
7059
COLLET CHUCKS
ADVANTAGES AT A GLANCE
The new and modular CAPTIS clamping system is impressive in both rotary applications in lathes and
in stationary use in drilling, milling and machining centres and measuring machines. The conversion
from outer to inner clamping can be done in less than 1 minute with the innovative and patent-pen-
ding quick changing function. The encompassing clamping enables precise concentricity and repea-
tability of 0.005 mm without deforming the workpiece.
Highest flexibility due to modular construction
Precise concentricity and repeatability of 0.005 mm
Compact and weight-reduced construction for a larger work area
CAPTIS COLLET CHUCKS Replaceable rubber segments made of innovative
rubber mixture for the longest service life
Clamping range of ± 0,5 mm
Hardened and ground steel segments for high
resistance to wear
Collet chuck hot vulcanized on request
ABSIS-C CLAMPING MANDREL Innovative and patent-pending quick changing
function to convert from outer to inner clamping in
less than one minute
Stable and precise clamping by axial tension
against the workpiece stop
CAPTIS-D, CAPTIS-A, CAPTIS-AF Modular construction for highest flexibility
Compact construction for more work space
Many combination and conversion possibilities
CAPTIS-M Compact design with reduced interfering contours for
optimum workpiece accessibility and enlarged working
space
Modular conversion option for internal and external
workpiece stop
Video CAPTIS-D
Co
llet
chuc
ks
www.eshop.roehm.biz
7060
Co
llet
chuc
k sy
stem
C
AP
TIS
Collet chucks
CAPTIS-D - with through-hole
on request
APPLICATIONFor use on lathes.Ideal for bars and pipe machining on the main spindle.
TYPEForce-actuated.With through-hole for bar and pipe machining.With axial tension.
CUSTOMER BENEFITS Maximum flexibility thanks to modular design and versatile combination and
retrofitting options Low weight and low height thanks to compact design for more work area in the
machine Short setup and non-productive times thanks to fast collect chuck change as
well as great expansion of the collet chucks Fast retrofitting from external to internal clamping thanks to optionally available
segment clamping mandrel ABSIS-C
TECHNICAL FEATURES- Manual lubrication- Collet chucks with exchangeable and oil-resistant vulcanized rubber
CAPTIS-D = in Latin: hold, through-hole
www.eshop.roehm.biz
CAPTIS-D collet chucks - with axial pull
Size 32 42 52 65 80 100 120
Collet chucks 1283101 1283102 1283103 1283104 1283105 1283106 1283107
D1 mm 137 137 155 155 215 215 250
D2 mm 100 118 138 138 190 190 215
D3 6x M8 6x M8 6x M8 6x M8 6x M12 6x M12 6x M12
D4 mm M54x1,5 M54x1,5 M74x1,5 M74x1,5 M94x1,5 M120x1,5 M132x1,5
D5 34 44 54 68 82 102 122
D6 70 92 92 110 132 190 225
D7 3x M8 3x M8 3x M8 3x M8 3x M10 3x M12 3x M12
D8 84 106 106 122 152 215 250
L1 mm 70,5 69 72,5 78 85 102 102
L2 mm 18 18 18 26 19 - -
L3 mm 17 17 17 17 20 20 20
L4 min mm 1,5 1,5 1,5 1,5 -0,5 -0,5 -0,5
L4 max mm 7,5 7,5 7,5 7,5 5,5 5,5 5,5
Total stroke mm 6 6 6 6 6 6 6
Maximum draw bar pull kN 25 35 40 45 50 65 70
Total clamping force kN 60 70 80 90 100 130 140
Speed max, min-1 8000 7000 6500 6000 5500 5000 4000
Chucking capacity mm 4-32 4-42 4-52 4-65 5-80 42-100 62-120
Clamping device manual 1283285 1283286 1283287 1283288 1283289 - -
Clamping device pneumatic - - - - 1362635 1362636 1362637
Conversion kit to CAPTIS-A 1283256 1283257 1283258 1283259 1283260 1283261 1283262
Turning fixture for soft collets 1316901 1316902 1316903 1316904 1316905 1316906 1316907
7061
Co
llet
chuc
k sy
stem
C
AP
TIS
Collet chucks
CAPTIS-A - prepared for internal workpiece stop
on request
APPLICATIONExternal clamping of round workpieces, as well as square and hexagon profiles. Turning, milling, grinding operations as well as for measuring.Ideal for machining insertion parts on the main spindle.
TYPEForce-actuated.Optional through-hole for bar machining by removing the internal workpiece stop.With axial tension against workpiece stop.
CUSTOMER BENEFITS Maximum flexibility thanks to modular design and versatile combination and
retrofitting options Low weight and low height thanks to compact design for more work area in the
machine Short setup and non-productive times thanks to fast collect chuck change as
well as great expansion of the collet chucks Fast retrofitting from external to internal clamping thanks to optionally available
segment clamping mandrel ABSIS-C Sturdy clamping of the workpiece thanks to axial tension against the workpiece
stop Prepared for internal workpiece stop and front stop
TECHNICAL FEATURES- Manual lubrication- Collet chucks with exchangeable and oil-resistant vulcanized rubber
CAPTIS-A = in Latin: hold, workpiece stop
www.eshop.roehm.biz
CAPTIS-A collet chuck - with axial tension against workpiece stop
Size 32 42 52 65 80 100 120
Collet chucks 1283108 1283109 1283110 1283111 1283112 1283113 1283114
D1 mm 137 137 155 155 215 215 250
D2 mm 100 118 138 138 190 190 225
D3 6x M8 6x M8 6x M8 6x M8 6x M12 6x M12 6x M12
D4 mm M54x1,5 M54x1,5 M74x1,5 M74x1,5 M94x1,5 M120x1,5 M132x1,5
D5 mm M22x1,5 M30x1,5 M36x1,5 M50x1,5 M55x1,5 M85x1,5 M105x1,5
D6 70 92 92 110 132 190 225
D7 3x M8 3x M8 3x M8 3x M8 3x M10 3xM12 3x M12
D8 84 106 106 122 152 215 250
L1 mm 84 82,5 89 94,5 103 122 122
L2 mm 18 18 18 26 19 - -
L3 mm 17 17 17 17 20 20 20
L4 min mm 1,5 1,5 1,5 1,5 -0,5 -0,5 -0,5
L4 max mm 7,5 7,5 7,5 7,5 5,5 5,5 5,5
Total stroke mm 6 6 6 6 6 6 6
Maximum draw bar pull kN 25 35 40 45 50 65 70
Total clamping force kN 60 70 80 90 100 130 140
Speed max, min-1 8000 7000 6500 6000 5500 5000 4000
Chucking capacity mm 4-32 4-42 4-52 4-65 5-80 42-100 62-120
Clamping device manual 1283285 1283286 1283287 1283288 1283289 - -
Clamping device pneumatic - - - - 1362635 1362636 1362637
Conversion kit to CAPTIS-D 1283249 1283250 1283251 1283252 1283253 1283254 1283255
Turning fixture for soft collets 1316901 1316902 1316903 1316904 1316905 1316906 1316907
7062
Co
llet
chuc
k sy
stem
C
AP
TIS
Collet chucks
CAPTIS-AF - axially fixed collet chuck
on request
APPLICATIONExternal clamping of round workpieces, as well as square and hexagon profiles. Turning, milling, grinding operations as well as for measuring.Ideal for delicate workpieces, short clamping lengths and for use in opposed spindles or counter spindles.
TYPEForce-actuated.Optional through-hole for bar machining by removing the internal workpiece stop.Axially fixed collect chuck, no axial tension against internal workpiece stop.
CUSTOMER BENEFITS Maximum flexibility thanks to modular design and versatile combination and
retrofitting options Low weight and low height thanks to compact design for more work area in the
machine Short setup and non-productive times thanks to fast collect chuck change as
well as great expansion of the collet chucks No damage, impressions on workpieces due to axially fixed collect chuck Prepared for internal workpiece stop and front stop
TECHNICAL FEATURES- Manual lubrication- Collet chucks with exchangeable and oil-resistant vulcanized rubber
CAPTIS-AF = in Latin: hold, axially fixed collet chuck
www.eshop.roehm.biz
CAPTIS-AF collet chuck - axially fixed collet chuck, no axial tension against internal workpiece stop
Size 32 42 52 65 80 100 120
Collet chucks 1285001 1285002 1285003 1285004 1285005 1285006 1285007
D1 mm 137 137 155 155 215 215 250
D2 mm 120 120 138 138 190 190 225
D3 6x M8 6x M8 6x M8 6x M8 6x M12 6x M12 6x M12
D4 mm M48x1,5 M54x1,5 M74x1,5 M74x1,5 M120x1,5 M120x1,5 M132x1,5
D5 mm M22x1,5 M30x1,5 M36x1,5 M50x1,5 M65x1,5 M85x1,5 M105x1,5
D6 94 120 138 138 190 190 225
D7 3x M6 3x M8 3x M8 3x M8 3x M8 3x M8 3x M8
D8 105 137 155 155 215 215 250
L1 mm 80,5 81 92,5 92,5 102 102 122
L2 mm 34,7 - - - - - -
L3 mm 15,5 16 17 17 18,5 18,5 18,5
L4 min -4 -2,5 2,5 2,5 -1 -1 -1
L4 max 2 3,5 8,5 8,5 5 5 5
Total stroke mm 6 6 6 6 6 6 6
Maximum draw bar pull kN 25 35 40 45 50 65 70
Total clamping force kN 60 70 80 90 100 130 140
Speed max, min-1 8000 7000 6500 6000 5500 5000 4000
Chucking capacity mm 4-32 4-42 4-52 4-65 5-80 42-100 62-120
Clamping device manual 1283285 1283286 1283287 1283288 1283289 - -
Clamping device pneumatic - - - - 1362635 1362636 1362637
Turning fixture for soft collets 1316901 1316902 1316903 1316904 1316905 1316906 1316907
7063
Fla
nge
CA
PT
IS
Intermediate flange
Intermediate flange
on request
Intermediate flange ISO 702-1 (DIN 55028) with adjusting screwSize 32/42 - Nr.5 32/42 - Nr.6 52/65 - Nr.5 52/65 - Nr.6 52/65 - Nr.8 80/100 - Nr.6 80/100 - Nr.8 120 - Nr.8 120 - Nr.11
Intermediate flange 1283194 1283195 1283198 1283199 1283200 1283203 1283204 1283207 1283209
D1 mm 82,563 106,375 82,563 106,375 139,719 106,375 139,719 139,719 196,869
D2 mm 104,8 133,4 104,8 133,4 171,4 133,4 171,4 171,4 235
D3 6x M10 3x M12 6x M10 3x M12 3x M16 6x M12 3x M16 6x M16 3x M20
D4 mm 100/120 100/120 138 138 138 190 190 225 225
D5 mm 6x M8 6x M8 6x M8 6x M8 6x M8 6x M12 6x M12 6x M12 6x M12
D6 137 137 155 155 155 215 215 250 250
D7 mm 150 165 168 168 210 230 230 270 280
L1 mm 34,5 35,5 36 35,5 42 47 40 55 40
L2 mm 10 10 10 10 10 10 10 12 12
Intermediate flange cylindrical centre mount with adjusting screwSize 32/42-Z140 52/65-Z140 52/65-Z170 80/100-Z170 80/100-Z220 120-Z220
Intermediate flange 1283196 1283201 1283202 1283205 1283206 1283208
D1 mm 140 140 170 170 220 220
D2 mm 104,8 104,8 133,4 133,4 171,4 171,4
D3 6x M10 6x M10 6x M12 6x M12 6x M16 6x M16
D4 mm 100/120 138 138 190 190 225
D5 mm 6x M8 6x M8 6x M8 6x M12 6x M12 6x M12
D6 137 155 155 215 215 250
D7 mm 150 168 180 230 230 270
L1 mm 19,5 27,5 22,5 47 40 55
L2 mm 10 10 10 10 10 12
L3 mm 6 6 6 6 6 6
www.eshop.roehm.biz
7064
Co
llet
chuc
k sy
stem
C
AP
TIS
Collet chucks
CAPTIS-M - for rotating and stationary use
on request
APPLICATIONIdeally suited for rotating use in lathes as well as for stationary use in drilling, milling and machining centers, measuring machines as well as for conventional and manual processing.
TYPEOperated manually with a security key.
With axial tension against workpiece stop.
CUSTOMER BENEFITS Compact design with reduced interfering contours for optimum workpiece
accessibility and enlarged working space Modular conversion option for internal and external workpiece stop Stable clamping using axial tension
TECHNICAL FEATURES- Manual lubrication- Collet chucks with exchangeable and oil-resistant vulcanized rubber
CAPTIS-M = in Latin: hold, manually
www.eshop.roehm.biz
CAPTIS-M collet chuck - with axial tension against workpiece stop
Size 32 42 52 65
Collet chucks(incl. workpiece stop, protecting sleeve
and security key)
1345739 1345740 1345741 1345742
D1 mm 140 160 160 200
D2 mm 105 125 125 160
D3 mm [H6] 120 140 140 176
D4 6xM8 6xM10 6xM10 6xM10
D5 3xM8 3xM10 3xM10 3xM10
D6 mm 32,5 42,5 52,5 65,5
D7 M10 M10 M10 M10
D8 mm [g6] 84 106 106 122
D9 mm 70 92 92 110
D10 3xM8 3xM8 3xM8 3xM8
L1 mm 90 100 100 110
L2 mm 4 4 4 4
L3 mm 10 10 10 10
L4 mm 13 14 14 16
L5 mm 14 16 16 16
L6 mm 9 10 10 11
Total stroke mm 6 6 6 6
Expansion collet mm 2,1 2,6 2,6 2,6
Max, tightening torque 60 120 120 120
Total clamping force kN 30 60 60 50
Speed max, min-1 5000 4500 4500 4000
Chucking capacity mm 4-32 4-42 4-52 4-65
Protecting sleeve 1345751 1345760 1345768 1345777
Workpiece stop 1345749 1345758 1345766 1345775
Clamping device manual 1283285 1283286 1283287 1283288
Clamping device pneumatic - - - -
Key (only for chucks with stationary use) 107428 107429 107429 107430
Security key (acc, to DIN 1550 for
rotating chucks)
154372 154373 154373 154374
Turning fixture for soft collets 1316901 1316902 1316903 1316904
7065
Fla
nge
CA
PT
IS-M
Intermediate flange
Intermediate flange
on request www.eshop.roehm.biz
A09
Steel Intermediate flange according to DIN ISO 702-1 (DIN 55026) / cylindrical mount on chuck side according to DIN 6350
Size 32 32 32 42/52 42/52 42/52 42/52 65/80 65/80 65/80
Short taper size Gr. 4 Gr. 5 Gr. 6 Gr. 4 Gr. 5 Gr. 6 Gr. 8 Gr. 5 Gr. 6 Gr. 8
Intermediate flange 182902 182904 182906 182908 182910 182912 182914 182918 182920 182922
A mm 140 140 165 160 160 165 210 200 200 210
B mm 21 21 25 18 18 25 32 18 22 32
C mm 95 95 95 125 125 125 125 160 160 160
D mm 63,513 82,563 106,375 63,513 82,563 106,375 139,719 82,563 106,375 139,719
E mm 61 79,6 80 61 79,6 103,2 100 79,6 103,2 136,2
F mm 82,6 104,8 133,4 82,6 104,8 133,4 171,4 104,8 133,4 171,4
G M10 M10 M12 M10 M10 M12 M16 M10 M12 M16
H mm 108 (120) 108 (120) 108 (120) 140 140 140 140 176 176 176
I 3x/6xM8 3x/6xM8 6xM8 6xM10 6xM10 6xM10 6xM10 6xM10 6xM10 6xM10
Complete with fastening screws
A09
Steel Intermediate flange according to DIN ISO 702-2 (DIN 55029) / cylindrical mount on chuck side according to DIN 6350
Size 32 32 32 42/52 42/52 42/52 42/52 65/80 65/80 65/80
Short taper size Gr. 4 Gr. 5 Gr. 6 Gr. 4 Gr. 5 Gr. 6 Gr. 8 Gr. 5 Gr. 6 Gr. 8
Intermediate flange 182958 182960 182962 182966 182968 182970 182972 182976 182978 182980
A mm 140 146 181 160 160 181 225 200 200 225
B mm 24 30 36 23,5 26,5 35,5 38,5 26,50 32,50 39,50
C mm 95 95 95 125 125 125 125 160 160 160
D mm 63,513 82,563 106,375 63,513 82,563 106,375 139,719 82,563 106,375 139,719
E mm 33 33 33 50 50 50 50 70 70 70
F mm 82,6 104,8 133,4 82,6 104,8 133,4 171,4 104,8 133,4 171,4
G M10x1 M12x1 M16x1,5 M10x1 M12x1 M16x1,5 M20x1,5 M12x1 M16x1,5 M20x1,5
H mm 108 (120) 108 (120) 108 (120) 140 140 140 140 176 176 176
I 6xM8 6xM8 6xM8 6xM10 6xM10 6xM10 6xM10 6xM10 6xM10 6xM10
J mm 3x9 - - 3x11 3x11 - - 3x11 3x11 -
Complete with cam locking bolts
A HF D
I
G
CE
B
7° 7
´ 30“
-30“
A H F D E C
J
GI
7° 7
´ 30“
-30“
B
7066
Fla
nge
CA
PT
IS-M
Intermediate flange
Intermediate flange
on requestwww.eshop.roehm.biz
A09
Steel Intermediate flange according to DIN ISO 702-3 (DIN 55027) / cylindrical mount on chuck side according to DIN 6350
Size 32 32 32 42/52 42/52 42/52 42/52 65/80 65/80 65/80
Short taper size Gr. 4 Gr. 5 Gr. 6 Gr. 4 Gr. 5 Gr. 6 Gr. 8 Gr. 5 Gr. 6 Gr. 8
Intermediate flange 183014 183016 183018 183022 183024 183026 183028 183032 183034 183036
A mm 140 140 170 160 160 170 220 200 200 220
B mm 16,5 16,5 27 21,5 21,5 18 31,5 21,5 21,5 21,5
C mm 95 95 95 125 125 125 125 160 160 160
D mm 63,513 82,563 106,375 63,513 82,563 106,375 139,719 82,563 106,375 139,719
E mm 61 79,6 80 61 79,6 103,2 100 79,6 103,2 136,2
F mm 85 104,8 133,4 85 104,8 133,4 171,4 104,8 133,4 171,4
G M10 M10 M12 M10 M10 M12 M16 M10 M12 M16
H mm 108 (120) 108 (120) 108 (120) 140 140 140 140 176 176 176
I 6xM8 6xM8 6xM8 6xM10 6xM10 6xM10 6xM10 6xM10 6xM10 6xM10
J mm 3x9 - - 3x11 3x11 - - 3x11 3x11 3x11
Complete with studs and collar nuts
A09
Steel Intermediate flange according to DIN ISO 702-4 (DIN 55028) / cylindrical mount on chuck side according to DIN 6350
Size 32 32 32 42/52 42/52 42/52 42/52 65/80 65/80
Flange Gr. 3 Gr. 4 Gr. 5 Gr. 3 Gr. 4 Gr. 5 Gr. 6 Gr. 5 Gr. 6
Cylindrical mount 90 115 140 90 115 140 170 140 170Intermediate flange 1349459 1349461 1349463 1349465 1349467 1349469 1349471 1349473 1349475
A mm 140 140 150 160 160 160 180 200 200
B mm 13 20 18 13 13 15 20 16 18
C mm 95 95 95 125 125 125 125 160 160
D mm 90 + 0,022/0 115 + 0,022/0 140 + 0,025/0 90 + 0,022/0 115 + 0,022/0 140 + 0,025/0 170 + 0,025/0 140 + 0,025/0 170 + 0,025/0
E mm 43 53 81 43 53 81 81 81 81
F mm 70,6 82,6 104,8 70,6 82,6 104,8 133,4 104,8 133,4
G mm 3xM10 3xM10 3xM10 6xM10 6xM10 6xM10 3xM12 6xM10 6xM12
H mm 120 120 120 140 140 140 140 176 176
I 6xM8 6xM8 6xM8 6xM10 6xM10 6xM10 6xM10 6xM10 6xM10
Complete with fastening screws
A F
G
D E C H
B
I
A
7° 7
`30“
-30“
D EG
FH
I
B
C
J
7067
Bas
e p
late
fo
r C
AP
TIS
-M
Base plate
Base plate
on request www.eshop.roehm.biz
A09
Base plates for CAPTIS-M and lathe chucks with cylindrical centre mount, DIN 6350
Size 32 42/52 65/80
Base plate 1352890 162793 162401
D1 mm 220 240 280
D2 mm 105 125 160
D3 mm 120 140 176
D4 6xM8 6xM10 6xM10
D5 mm 40 42 55
D6 mm 14 14 14
D7 mm 28 28 28
D8 mm 3x9 3x11 3x11
D9 mm 3x15 3x18 3x18
D10 190 212 252
L1 mm 27 27 27
L2 mm 3 3 3
L3 mm 16 16 16
L4 mm 14 17 17
L5 10 11 11
7068
CA
PT
IS C
olle
t ch
ucks
Collet chucks
CAPTIS collet
Clamping of unmachined parts with extensionSize D1 D2 L1 LQ Q G W Round Hexagon Square Raising Order No.
32 46,2 57,7 47 X 8-32mm 1 CAPTIS-32-47-RLQ / D3*
32 46,2 57,7 47 X 7-27mm 1 CAPTIS-32-47-SQ / D3*
32 46,2 57,7 47 X 7-22mm 1 CAPTIS-32-47-VQ / D3*
Clamping of unmachined parts without extensionSize D1 D2 L1 LQ Q G W Round Hexagon Square Raising Order No.
32 46,2 57,7 44 X 4-32mm 1 CAPTIS-32-44-RG / D3*
32 46,2 57,7 44 X 5,15,20mm 1 CAPTIS-32-44-WG / D3*
Clamping of unmachined parts with extensionSize D1 D2 L1 LQ Q G W Round Hexagon Square Raising Order No.
42 54 79,5 47 X 8-42mm 0,5 CAPTIS-42-47-RLQ / D3*
42 54 79,5 47 X 7-36mm 1 CAPTIS-42-47-SQ / D3*
42 54 79,5 47 X 7-30mm 1 CAPTIS-42-47-VQ / D3*
Clamping of machined parts without extensionSize D1 D2 L1 LQ Q G W Round Hexagon Square Raising Order No.
42 54 79,5 42 X 4-42mm 0,5 CAPTIS-42-42-RG / D3*
42 54 79,5 42 X 8,15,30mm 0,5 CAPTIS-42-42-WG / D3*
Clamping of unmachined parts with extensionSize D1 D2 L1 LQ Q G W Round Hexagon Square Raising Order No.
52 65,7 79,5 46 X 8-52mm 0,5 CAPTIS-52-46-RLQ / D3*
52 65,7 79,5 46 X 7-45mm 1 CAPTIS-52-46-SQ / D3*
52 65,7 79,5 46 X 8-36mm 1 CAPTIS-52-46-VQ / D3*
Clamping of machined parts without extensionSize D1 D2 L1 LQ Q G W Round Hexagon Square Raising Order No.
52 65,7 79,5 46 X 4-52mm 0,5 CAPTIS-52-46-RG / D3*
52 65,7 79,5 46 X 8,15,30mm 0,5 CAPTIS-52-46-WG / D3*
on request
(G): Smooth from 4-7 mm smooth
(LQ): Longitudinal and transverse grooves from 8-10 mm with trans. grooves
(Q): Transverse grooves caused by production
(W): Soft
* Please specify clamping diameters D3 in the order, valid for collet chucks type LQ + Q
www.eshop.roehm.biz
7069
CA
PT
IS C
olle
t ch
ucks
Collet chucks
CAPTIS collet
Clamping of unmachined parts with extensionSize D1 D2 L1 LQ Q G W Round Hexagon Square Raising Order No.
65 80 99,5 58 X 8-65mm 0,5 CAPTIS-65-58-RLQ / D3*
65 80 99,5 58 X 7-56mm 1 CAPTIS-65-58-SQ / D3*
65 80 99,5 58 X 7-46mm 1 CAPTIS-65-58-VQ / D3*
Clamping of machined parts without extensionSize D1 D2 L1 LQ Q G W Round Hexagon Square Raising Order No.
65 80 99,5 53 X 0,5 CAPTIS-65-53-RG / D3*
65 80 99,5 53 X
5-65mm
8,20,40mm 0,5 CAPTIS-65-53-WG / D3*
Clamping of unmachined parts with extensionSize D1 D2 L1 LQ Q G W Round Hexagon Square Raising Order No.
80 94,5 114,5 53 X 11-80mm 1 CAPTIS-80-53-RLQ / D3*
80 94,5 114,5 53 X 7-68mm 1 CAPTIS-80-53-SQ / D3*
80 94,5 114,5 53 X 8-42mm 1 CAPTIS-80-53-VQ / D3*
Clamping of machined parts without extensionSize D1 D2 L1 LQ Q G W Round Hexagon Square Raising Order No.
80 94,5 114,5 53 X 5-80mm 1 CAPTIS-80-53-RG / D3*
80 94,5 114,5 53 X 20,30,40,
60mm
1 CAPTIS-80-53-WG / D3*
Clamping of unmachined parts with extensionSize D1 D2 L1 LQ Q G W Round Hexagon Square Raising Order No.
100 121 144,5 59 X 42-100mm 1 CAPTIS-100-59-RLQ / D3*
100 121 144,5 59 X 50-86mm 1 CAPTIS-100-59-SQ / D3*
100 121 144,5 59 X 50-70mm 1 CAPTIS-100-59-VQ / D3*
Clamping of machined parts without extensionSize D1 D2 L1 LQ Q G W Round Hexagon Square Raising Order No.
100 121 144,5 59 X 42-100mm 1 CAPTIS-100-59-RG / D3*
100 121 144,5 59 X 30,45,65,
90mm
1 CAPTIS-100-59-WG / D3*
Clamping of unmachined parts with extensionSize D1 D2 L1 LQ Q G W Round Hexagon Square Raising Order No.
120 141,8 180 61 X 62-120mm 1 CAPTIS-120-61-RLQ / D3*
120 141,8 180 61 X 50-104mm 1 CAPTIS-120-61-SQ / D3*
120 141,8 180 61 X 50-85mm 1 CAPTIS-120-61-VQ / D3*
Clamping of machined parts without extensionSize D1 D2 L1 LQ Q G W Round Hexagon Square Raising Order No.
120 141,8 180 61 X 62-120mm 1 CAPTIS-120-61-RG/ D3*
120 141,8 180 61 X 65,90,110mm 1 CAPTIS-120-61-WG / D3*
on request
(G): Smooth from 4-7 mm smooth
(LQ): Longitudinal and transverse grooves from 8-10 mm with trans. grooves
(Q): Transverse grooves caused by production
(W): Soft
* Please specify clamping diameters D3 in the order, valid for collet chucks type LQ + Q
www.eshop.roehm.biz
7070
Co
llet
chuc
k sy
stem
C
AP
TIS
Segment clamping mandrel
on requestwww.eshop.roehm.biz
Accessories CAPTIS
Clamping device for CAPTIS collets, manual Size 32 42
Clamping device manual 1283285 1283286
Suitable for round round
Weight kg 1 1,1
Clamping device for CAPTIS collets, pneumatic Size 80 100
Clamping device pneumatic 1362635 1362636
Suitable for round round
Weight kg 2,5 2,8
Clamping device for CAPTIS collets, pneumatic, 2 hand actuation Size 120
Clamping device pneumatic (2 hand actuation) 1362637
Suitable for round
Weight kg 3
Clamping device for CAPTIS collets, manual Size 52 65 80
Clamping device manual 1283287 1283288 1283289
Suitable for round round round
Weight kg 1,1 1,2 1,3
7071
Co
llet
chuc
k sy
stem
C
AP
TIS
www.eshop.roehm.biz
Segment clamping mandrel
ABSIS-C - patented quick-change functionAPPLICATIONInternal clamping of round workpieces. Turning, milling, grinding and toothing operations, as well as for balancing and measuring.Rotational machining with adaptation to CAPTIS-D, CAPTIS-A.Stationary machining with adaptation to CAPTIS-M.Ideal for clamping in through holes.
TYPEManual with adaptation to CAPTIS-M.Force-actuation with adaptation to CAPTIS-D, CAPTIS-A.
CUSTOMER BENEFITS Short setup and non-productive times thanks to great expansion of the segment
sleeves Vibration damping due to high vulcanized rubber component of the clamping
sleeves Sturdy clamping of the workpiece thanks to axial tension against the workpiece
stop Fast change of segment sleeves thanks to central clamping screw High concentricity, axial run-out and repeatability Innovative quick-change function for fast retrofitting from external to internal
clamping
TECHNICAL FEATURES- Identical change parts as for standard segment clamping mandrel ABSIS
ABSIS-C = in Latin: segment, CAPTIS
ABSIS-C clamping mandrelSize ABSIS 00 ABSIS 00 ABSIS 00 ABSIS 00 ABSIS 01 ABSIS 01 ABSIS 01 ABSIS 01 ABSIS 02 ABSIS 02 ABSIS 02 ABSIS 03
Segment clamping mandrel 1286200 1286201 1286202 1286203 1286204 1286205 1286206 1286207 1286208 1286209 1286210 1286211
For CAPTIS 32 CAPTIS 42 CAPTIS 52 CAPTIS 65 CAPTIS 32 CAPTIS 42 CAPTIS 52 CAPTIS 65 CAPTIS 42 CAPTIS 52 CAPTIS 65 CAPTIS 65
D Min-Ø unclamped from mm 19,7 19,7 19,7 19,7 25,7 25,7 25,7 25,7 35,7 35,7 35,7 50,7
D Min-Ø unclamped to mm 27,7 27,7 27,7 27,7 38,7 38,7 38,7 38,7 54,7 54,7 54,7 81,7
D1 88 108 110 128 88 108 110 128 110 110 128 128
D2 70 90 92 110 70 90 92 110 90 92 110 110
D3 3x M8 3x M8 3x M8 3x M8 3x M8 3x M8 3x M8 3x M8 3xM8 3x M8 3x M8 3x M8
D4 82 82 82 82 82 82 82 82 97 97 97 102
D5 70 70 70 70 70 70 70 70 84 84 84 89
D6 3x M6 3x M6 3x M6 3x M6 3x M6 3x M6 3x M6 3x M6 3x M6 3x M6 3x M6 3x M6
D7 19 19 19 19 25 25 25 25 35 35 35 48
D8 M6x0,75 M6x0,75 M6x0,75 M6x0,75 M10x1 M10x1 M10x1 M10x1 M14x1 M14x1 M14x1 M18x1
L1 62,2 62,2 62,2 62,2 67,2 67,2 67,2 67,2 95,2 95,2 95,2 105,2
L2 56,7 56,7 56,7 56,7 60,7 60,7 60,7 60,7 85 85 85 93,2
L3 35 35 35 35 35 35 35 35 42,5 42,5 42,5 44,5
L4 25 25 25 25 27 27 27 27 30,25 30,25 30,25 31,5
L5 21,7 21,7 21,7 21,7 25,7 25,7 25,7 25,7 42,5 42,5 42,5 48,7
L6 15 15 15 15 15 15 15 15 18 18 18 18,5
7072
Power operated collet chucks
KZF
Po
wer
-op
erat
ed c
olle
t ch
uck
KZ
F
1. Body
2. Thrust sleeve for steel collets and segment collets. By
replacing the thrust sleeve, duo-segment collets can be
used.
3. Union nut with bayonet lock
4. Protection against torsion for thrust sleeve
- Adapter fitting must be ordered separately. Suitable for
existing draw tube, glue into thrust sleeve.
- Special accessories, are not part of the scope of deli-
very. The workpiece stop can only be used for segment
collets. Order separately: Cap screw or stud bolt with
locknut acc. to DIN 55027.
5. Protection against torsion for collet
Clamping with segment collet and workpiece stopHollow clamping with steel collet DIN 6343
31 24 5
Chuck size Collets DIN 6343
Type Clamping capacity Tolerance
KZF 408206-E
DIN 6343173 E
2-42 6-36 6-29+0,2-0,3
KZF 608207-E
DIN 6343185 E
4-60 8-52 7-42+0,2-0,3
KZF 807037-E
DIN 6343193 E
20-80 18-69 15-56+0,2-0,3
Chuck size Segment collets DIN 6343
TypeClamping capacity
Tolerance
KZF 40 Series R 36
8-422±0,3
KZF 60 Series R 52
19-61 2±0,3
KZF 80- - -
C 15
Connecting piece for collet chuck KZF
Item no. Größe A B C D
683648 40 62 60 8,5 M66x1,5
683649 60 85 60 8,5 M88x1,5
683652 80 100 60 12,5 M114x1,5
www.eshop.roehm.biz
7073
Po
wer
-op
erat
ed c
olle
t ch
uck
KZ
F
Power-operated collet chucks
KZF - without axial tightening, for DIN collet chucks
on request
APPLICATIONExternal clamping of round workpieces, as well as square and hexagon profiles. Turning, milling, grinding operations as well as for measuring.Ideal for bars and pipe machining on the main spindle. For using standardized DIN collet chucks or segment collet chucks.
TYPEForce-actuated.Internal workpiece stop optional in conjunction with segment collet.
CUSTOMER BENEFITS Light weight and reduced height thanks to compact design Short setup times thanks to quick change of collet chuck High flexibility thanks to modular system Quick retrofitting to other workpieces by changing the collect chuck Axially fixed collect chuck, no axial tension against internal workpiece stop
TECHNICAL FEATURES- Hardened, low-wear design- Either DIN steel or segment collet chucks
KZF = force-actuated, collet, flange
C 15
Power-operated collet chuck KZF, with quick-acting bayonet catch, without collet
Cylindrical center mount / short taper mount, draw tube adapter available on request Id.-Nr. 439989 439990 439991 439992 439993 439994 439995 439996 439997 439998
Size 40 40 40 40 60 60 60 60 80 80
Mount Z-140 Z-88 KK 5 KK 6 Z-115 Z-170 KK 6 KK 8 Z-130 KK 8
D1 160 135 170 170 157 190 210 210 187 210
D2 100 100 100 100 122 122 122 122 150 150
D3 140 88 82,563 106,375 115 170 106,375 139,719 130 139,719
D4 104,8 115 104,8 133,4 136 133,4 133,4 171,4 166 171,4
D5 4xM10 6xM8 4xM10 4xM12 8xM8 6xM12 4xM12 4xM16 8xM8 4xM16
D6 M66x1,5 M66x1,5 M66x1,5 M66x1,5 M88x1,5 M88x1,5 M88x1,5 M88x1,5 M88x1,5 M114x1,5
L1 116 116 127 128 132 132 144 146 156 170
L2 25 25 25 25 25 25 25 25 30 30
L3 5 5 16 18 5 5 18 22 5 22
L4 min 16 16 32 33 16 16 33 35 17 36
L4 max 8,5 8,5 24,5 25,5 8,5 8,5 25,5 27,5 9,5 28,5
L5 8,5 8,5 8,5 8,5 8,5 8,5 8,5 8,5 12,5 12,5
Total stroke mm 7,5 7,5 7,5 7,5 7,5 7,5 7,5 7,5 7,5 7,5
Maximum draw
bar pull kN
25 25 25 25 30 30 30 30 35 35
Total clamping
force kN
50 50 50 50 60 60 60 60 70 70
Adm. speed
min-1
8000 8000 8000 8000 5000 5000 5000 5000 4000 4000
Chucking capa-
city mm
2-42 2-42 2-42 2-42 4-60 4-60 4-60 4-60 20-80 20-80
Moment of
inertia J kgm2
0,029 0,029 0,029 0,029 0,038 0,038 0,038 0,038 0,108 0,108
Weight wit-
hout collet kg
7,1 5,3 7,5 7,5 9,2 9,2 10,2 14 17,5 18
www.eshop.roehm.biz
7074
Po
wer
-op
erat
ed c
olle
t ch
uck
KZ
F-S
Power-operated collet chucks
KZF-S - with axial tightening, bayonet quick lock
on request
APPLICATIONExternal clamping of round workpieces with smooth or toothed outer geometry for turning, milling, grinding and measuring operations.Clamping device/clamping optimal adapted to the workpiece/machining process. Ideal for short clamping lengths.
TYPEForce-actuated.
CUSTOMER BENEFITS Sturdy clamping of the workpiece thanks to axial tension against the workpiece
stop Quick change of collet chuck by bayonet lock High concentricity, axial run-out and repeatability High flexibility thanks to modular system
TECHNICAL FEATURES- Manual lubrication/low-maintenance- Prepared for internal media feed-through, e.g. air and coolant- Prepared for internal workpiece stop- Collet chucks and internal workpiece stop can be individually adapted to the
workpiece- Sealing against chips
KZF-S = force-actuated, collet, flange, quick-change function
C 18
Power-operated collet chuck KZF-S, for external clamping
KZF 80 KZF 120 KZF 180
Body collet 1117832 1117830 1125403
Base bolt 1117833 1072101 1125404
Draw piece 1117837 1117827 1125408
Fastening plate 1117835 1072105 1125406
Bolt spacer 1117836 1072103 1072103
Ground stop for reverse valve cartridge 1117839 1072113 1125410
Ground stop for ermeto pipe 1117841 1117824 1125412
Reverse valve cartridge 1 Bar 756641 863134 863134
Reverse valve cartridge 3 Bar 843866 889894 889894
F Max, in daN 30 40 40
Speed max, min-1 6000 5000 3500
Stroke mm 4 4 4
Clamping dia, min, 30 60 100
Clamping dia, max, 80 120 180
Expansion in Ø mm 1,4 1,4 1,4
Ø G 170 220 285
H mm 125 136 136
Info: kzf@roehm.biz
www.eshop.roehm.biz
7075
Acc
esso
ries
KZ
F-S
Power-operated collet chucks
Accessories KZF-S
on request
C 18
Intermediate flange ISO 702-1 (DIN 55028)
A 05 Nr. 5 (A5) A 05 Nr. 6 (A6) A 06 A 08 Nr. 8 (A8) A 08
Intermediate flange 1117843 1072115 1117845 1072117 1125416 1117847 1072119 1125418
For KZF-S 80 KZF-S 80/AGILIS
05-07
KZF-S 81 KZF-S 120/
AGILIS 05-07
KZF-S 180 KZF-S 82 KZF-S 120/
AGILIS 05-07
KZF -S 180
Short-taper-Ø B 82,563 82,563 106,375 106,375 106,375 139,719 139,719 139,719
Short-taper pitch circle Ø C 104,8 104,8 133,4 133,4 133,4 171,4 171,4 171,4
Flange outer-Ø A 170 220 170 220 285 210 220 285
Ø D 105 135 105 135 200 105 135 200
Ø F mm 143 186 143 186 250 143 186 250
Ø O mm 16,3 16,3 19,45 19,45 19,45 24,2 24,2 24,2
Thread-Ø M M10 M10 M12 M12 M12 M16 M16 M16
Total length flange P 35 40 35 40 45 35 40 45
www.eshop.roehm.biz
7076
Sliding clamping mandrel KFG clamping-Ø 30 mm
APPLICATION
Turning of a differential housing
Clamping of a differential housing in two clamping planes. Diameter
difference between the clamping planes are compensated. The
workpiece stop is equipped with an air sensing. The entire clam-
ping mandrel is sealed with purge air.
CUSTOMER BENEFITS
Two compensating clamping planes
Concentricity of 0.02 mm
Sliding clamping mandrel KFG clamping-Ø 155 mm /clamping-Ø 161 mm
APPLICATION
Drilling of two workpieces with different diameters
Clamping of two clamping planes that are very close together.
Clamping of both clamping planes is done using springs. Pneumatic
unclamping via a cylinder in the basic take-up. Compact, space-
saving construction. Drain boreholes for coolant.
CUSTOMER BENEFITS
Overall height less than 200 mm
Concentricity of 0.03 mm
Sliding clamping mandrel KFG clamping range from 98-113 mm
APPLICATION
Turning of clamping cylinder liners, raw part
Left clamping plane force-actuated by draw bar. Right clamping plane
spring-actuated to compensate for workpiece tolerances. Stop can
be pulled back. Different workpiece diameters can be clamped by
changing the top jaws.
CUSTOMER BENEFITS
Large clamping range elongation of 7 mm
Large torque transmission from corrugation of the top jaws
Sp
ecia
l so
lutio
ns
Special solutions clamping mandrel
Special solutions KFG
www.eshop.roehm.biz
7077
Sliding clamping mandrel KFG with intermediate sleevesØ 104-120 mm
APPLICATION
Turning of clamping cylinder liners, final machining
Left clamping plane force-actuated by draw bar. Right clamping
plane force-actuated by tailstock. Stop can be pulled by with air
sensing. Different workpiece diameters can be clamped by chan-
ging the intermediate sleeve.
CUSTOMER BENEFITS
Intermediate sleeve can be changed
High concentricity of 0.015 mm
Sliding clamping mandrel KFG clamping-Ø 39 mm / clamping-Ø 40 mm
APPLICATION
Turning
The clamping in clamping zone 1 is done by the draw bar with
serrated jaws for high torque transmission. Clamping zone 2 is
actuated by springs and is equipped with an intermediate sleeve.
CUSTOMER BENEFITS
Intermediate sleeve protects the workpiece surface
Concentricity of 0.01 mm
Sp
ecia
l so
lutio
ns
Special solutions clamping mandrel
Special solutions KFG
www.eshop.roehm.biz
7078
Hydraulically actuated clamping mandrel for internal and external clamping
APPLICATION
Grinding, turning, milling, measuring
The hydraulic medium is put under pressure by a piston or by
system pressure. The elongation can be up to 0.3 % (up to 1 % for
special materials) of the diameter of the extension sleeve. Clamping
directly by extension sleeve or indirectly by a slotted intermediate
sleeve.
CUSTOMER BENEFITS
Cylindrical and round elongation over the entire clamping range
for a maximum concentricity tolerance of 0.003 mm
Very high clamping force in the clamping zone
Optimum damping, extremely quiet machining and significantly
higher service life of the tool due to precisely fitted clamping
sleeve
TECHNICAL FEATURES
Force-actuated or manual actuation. Wear-resistant surface.
The clamping systems can be put under pressure by hydraulic or
pneumatic cylinders, by the machine hydraulics directly or even
manually by using a screw. Different stops (optional): fixed,
withdrawable, external, oscillating, etc.
Sp
ecia
l so
lutio
ns
Special solutions clamping mandrel
Special solution HYKS
www.eshop.roehm.biz
7079
Special mandrels
APPLICATION
Grinding, milling
Basic take-up with different replaceable head for clamping
of pistons. Face clamping using internal draw piece. Position orien-
tation using centering forks. An insertion securing device prevents
incorrect loading. The actuation is done using OVS70 RÖHM clam-
ping cylinders. The entire external contour can be machined.
CUSTOMER BENEFITS
Clamping head with quick change system
Concentricity of 0.005 mm
Clamping fixture
APPLICATION
Milling, drilling
Clamping device with three basic units. Pneumatically release;
Clamping via spring force. Two basic units equipped with KFR
clamping mandrels. A basic unit equipped with a power chuck.
CUSTOMER BENEFITS
Basic units can be equipped with different clamping systems
Sp
ecia
l so
lutio
ns
Special solutions clamping mandrel
Special solutions
www.eshop.roehm.biz
The headquarters:
our main plant in
Sontheim/Brenz
The RÖHM main plant is located in Sontheim/Brenz. In this ultra-modern production facility com-
prising 41,000 m² optimum conditions have been achieved in order to solve the extensive range
of discerning construction and production tasks making the company even better, faster and more
efficient in the future.
Sontheim I All national and international activities are planned and coordinated at the administrative headquarters in
Sontheim. Thanks to the excellent infrastructure and transport routes, this location is ideal for a company relying on
perfect product quality as well as maximum flexibility. Furthermore, the region around Sontheim offers another key
basis for the success of our company: it is rich in quality awareness and motivated employees with the result that we
are ideally prepared for the challenges of the future. The main plant uniquely unites mass production, serial production
and customised individual production under a single roof.
Sontheim/Brenz
Key locations
for the company:
Dillingen and St. Georgen
Such strong growth on the part of the RÖHM Group is also obviously associated with higher
requirements on development and production capacities. The demands of today and tomorrow
can be complied with the two facilities in Dillingen and St. Georgen.
Dillingen/Danube St. Georgen
Plant Dillingen/Danube | This branch plant in Dillingen
was put into operation by the RÖHM Group as early as 1953.
Thanks to extremely positive development, the plant is subject
to constant expansion and modernisation. For this reason,
new modern production facilities were built in 1982 and 1991.
In 2007 RÖHM built a new production hall for two portal
turning and milling machines. This enables machining of
workpieces up to 4 metres in length which will secure a
leading market position for RÖHM in the future. More than
300 employees are primarily involved in engineering and
manufacturing lathechucks, machine vices and special
clamping equipment for turning and milling machinery as
well as for machining centres.
Engineering and sales department St. Georgen | Apart from standard mandrels, tailor-made solutions for
a wide variety of requirements are also manufactured
here in this small but accomplished high-tech forge.
RÖHM retains mechanical or power-operated mand-
rels, sliding jaw mandrels and hydraulic mandrels for its
customers for tensioning workpieces in drill holes or
interior contours.
Always close to our customers.
With locations all around the world.
Customer orientation at RÖHM has less to do with marketing than with attitude. We consider customer proximity
as an intensive dialogue with our partners as well as direct presence on key international markets.
Germany:RÖHM GmbH
Heinrich-Röhm-Straße 50
89567 Sontheim/Brenz
Tel 0049 73 25 – 16 0
Fax 0049 73 25 – 16 510
info@roehm.biz
www.roehm.biz
RÖHM GmbH
Röhmstraße 6
89407 Dillingen
Tel 0049 90 71 – 5 08-0
Fax 0049 90 71 – 5 08-174
infodlg@roehm.biz
RÖHM GmbH
Feldbergstr. 5
78112 St. Georgen
Tel 0049 – 77 24 – 94 68 12
Fax 0049 – 77 24 – 51 89
Mobil 0152 – 22 88 70 50
stg.info@roehm.biz
Brazil:RÖHM IND. E COM. DE
FERRAMENTAS DE FIXAÇÃO LTDA.
Rod. Raposo Tavares, Km 14 - Bloco A
2º andar - sala 2 - CEP 05576-100
São Paulo
Tel 0055 – 11 – 37 32 22 22
Fax 0055 – 11 – 37 35 30 97
vendas@rohm.com.br
www.br.roehm.biz
China:ROEHM China Co., Ltd.
Room 702, Building 24,
No. 518 Xinzhuan Road,
Songjiang District,
201612 Shanghai
Tel 0086 – 21 – 37 70 53 95
Fax 0086 – 21 – 37 70 53 76
roehmcn@roehm.biz
Czech Republic:RÖHM SLOVAKIA S.R.O.
Partizanska 73
95701 Banovce nad Bebravou
Slovakia
Tel 00421 – 3 87 60 02 22
Fax 00421 – 3 87 60 02 24
Mobil 00421 – 902 556 777
info@roehm.sk
France:RÖHM S. A. R. L.
325 rue Paul Langevin
BP 90204
F-60744 Saint Maximin cedex
Tel 0033 – 344 64 10 00
Fax 0033 – 344 64 00 68
fr.roehm@roehm.biz
www.rohm.fr
Great Britain:ROHM (Great Britain) LTD.
Unit 12 the ashway centre
Elm cresent Kingston-upon-Thames
Surrey KT 2 6 HH
Tel 0044 – 20 85 49 66 47
Fax 0044 – 20 85 41 17 83
rohmgb@roehm.biz
www.uk.roehm.biz
Italy:RÖHM Italia S. R. L.
Via Reiss Romoli 17-19
20019 Settimo Milanese (MI)
Palazzo Rothenberger
Tel 0039 – 02 – 92 10 35 31
Fax 0039 – 02 – 92 10 17 53
rohmitalia@roehm.biz
www.roehm-italia.it
Mexico:RÖHM Products México S. de R.L.
Emilio Garza Meléndez #6606
Col. Campestre Mederos
Monterrey, N.L., México, C.P. 64970
Tel 0052 81 – 9627 – 0686
info@rohm-products.com
Switzerland:RÖHM Spanntechnik AG
Feldstraße 39, 3360 Herzogenbuchsee
Tel 0041 – 629 56 30 20
Fax 0041 – 629 56 30 29
roehmch@roehm-spanntechnik.ch
www.ch.roehm.biz
Singapore:RÖHM Asia Pacific Pte. Ltd.
8 Ubi Road 2
#07-10 Zervex
Singapore 408538
Tel 0065 – 64 43 77 48
Mobil 0065 – 83 28 89 80
info@sg.roehm.biz
www.sg.roehm.biz
Slovakia:RÖHM SLOVAKIA S.R.O.
Partizanska 73
95701 Banovce nad Bebravou
Slovakia
Tel 00421 – 3 87 60 02 22
Fax 00421 – 3 87 60 02 24
Mobil 00421 – 9 14 12 29 32
info@roehm.sk
Spain:RÖHM Iberica S. A.
C/Rejas, No. 9 Nave 11 D
28022 Madrid
Tel 0034 – 91 – 3 13 57 90
Fax 0034 – 91 – 3 13 57 93
rohmiberica@roehm.biz
www.roehm-iberica.es
USA:ROHM Products of America
2500 Northlake Drive
30024 Suwanee, GA
Tel 001 – 770 – 963 – 8440
Fax 001 – 770 – 963 – 8407
rohmusa@roehm.biz
www.us.roehm.biz
Poland:RÖHM Polska Sp. z o.o.
Aleje Jerozolimskie 424A
05-800 Pruszków
Tel 0048 – 22 – 759 – 59 90
Fax 0048 – 22 – 759 – 59 99
roehmpolska@roehm.biz
Portugal:RÖHM Iberica S. A.
C/Rejas, No. 9 Nave 11 D
28022 Madrid
Tel 0035 1926 85 38 81
es.pjfernandes@roehm.com
www.roehm-iberica.es
Hungary:RÖHM Hungaria Kft.
Gyár u. 2. (BITEP Ipari Park)
H-2040 Budaörs
Tel 0036 – 209 – 324 597
jozsef.alker@roehm.biz
Presence on all continents from A for
Australia to V for Vietnam. You can receive
the contact information of our worldwide
representations easily through
www.roehm.biz.
Your contacts at RÖHM
Manufacturing and distribution bases
Indonesia:RÖHM Asia Pacific Pte. Ltd.
8 Ubi Road 2
#07-10 Zervex
Singapore 408538
Tel 0065 – 64 43 77 48
Mobil 0065 – 83 28 89 80
info@sg.roehm.biz
www.sg.roehm.biz
PT. Germantara Tooling Service Indonesia
Jl. Raya Bekasi Km. 21
Pulogadung Trade Centre (PTC) Blok 8A/8
Jakarta 13920 - Indonesia
Tel. +62 21 46834110
Mobile +62 811 9593027
kris@group.gts.co.id
www.gts.co.id
PT. SOMAGEDE INDONESIA
Komplek Griya Inti Sentosa
Jl. Griya Agung No. 3
Sunter Agung, Jakarta 14350 - Indonesia
Tel. +62 21 6410730
avi@somagede.com
www.somagede.com
Iran: Sakht Abzar Pars Co. (SAP)
No. 19/4 Saeb Tabrizi St.,
North Abbas Shirazi Ave,
Molla Sadra Ave., Tehran post code 19917
Tel. 00 98 / 21 / 88 03 18 88
Fax 00 98 / 21 / 88 03 77 33
sales@sap-iran.com
Ireland: ROHM (Great Britain) LTD.
Unit 12 the ashway centre
Elm cresent Kingston-upon-Thames
Surrey KT 2 6 HH
Tel 0044 - 20 85 49 66 47
Fax 0044 - 20 85 41 17 83
rohmgb@roehm.biz
www.uk.roehm.biz
Iceland: Fossberg Ltd.
Dugguvogi 6, 104 Reykjavik
Tel. 00 354 / 57 57 606
E-mail: fossberg@fossberg.is
Israel: ETMOS Tool Distributing Co. Ltd.
34 HAHOFER ST., 5811702 Holon
Tel. 00 972 - 3 / 55 81 933
Fax 00 972 - 3 / 55 81 934
etmos@etmos.co.il
Japan: RÖHM Asia Pacific Pte. Ltd.
8 Ubi Road 2
#07-10 Zervex
Singapore 408538
Tel 0065 – 64 43 77 48
Mobil 0065 – 83 28 89 80
info@sg.roehm.biz
www.sg.roehm.biz
Takeda Trade Co., Ltd.
NAKANOSHIMA DAI-BUILDING 603, 3-3-23,
NAKANOSHIMA, KITA-KU
530-6106 OSAKA
Tel. 00 81 3 6806 0757
hata@takeda-trade.co.jp
Luxemburg: RÖHM S.A.R.L.
325 rue Paul Langevin
60740 St. Maximin, FRANCE
Tel 00 33 / 3 44 64 10 00
Fax 00 33 / 3 44 64 00 68
fr.roehm@roehm.biz
Malaysia: RÖHM Asia Pacific Pte. Ltd.
8 Ubi Road 2
#07-10 Zervex
Singapore 408538
Tel 0065 – 64 43 77 48
Mobil 0065 – 83 28 89 80
info@sg.roehm.biz
www.sg.roehm.biz
KS Precision Tools (M) SDN. BHD.
A1-01-05, 1st Floor, Jalan SR 1/9
Taman Serdang Raya, Section 9,
43300 Seri Kembangan
Selangor Darul Ehsan, Malaysia
Tel. 603-8941 7168
michael@ks-precision.com
Baden-Wuerttemberg: Thomas Haas
Tel 0 77 25 / 91 48 95
Mobile 0152 / 22 88 71 20
thomas.haas@roehm.biz
Dominik Gotthelf
Mobile 0152 / 22 88 70 93
dominik.gotthelf@roehm.biz
Richard Sedlak
Tel 0 70 21 / 94 98 970
Mobile 0152 / 22 88 70 30
richard.sedlak@roehm.biz
Baden-Wuerttemberg /Rhineland-Palatinate / Saarland: Michael Schmitz
Tel 00 33 3 88 72 04 03
Mobile 0152 / 22 88 70 18
michael.schmitz@roehm.biz
Baden-Wuerttemberg / Bavaria:Dirk Gaarz
Mobil 0152 / 22 88 71 16
dirk.gaarz@roehm.biz
Bavaria:Jan Birkholz
Mobile 0152 / 22 88 70 14
jan.birkholz@roehm.biz
Gerhard Häutle
Tel 0 90 71 / 7 29 93 22
Mobile 0152 / 22 88 70 15
gerhard.haeutle@roehm.biz
Christian Heigl
Mobile 0152 / 22 88 70 26
christian.heigl@roehm.biz
Bavaria / Thuringia:Steffen Blatz
Mobile 0152 / 22 88 70 16
steffen.blatz@roehm.biz
North Rhine-Westphalia /Rhineland-PalatinateRalf Schnichels
Tel 0 21 52 / 8 97 35 47
Mobile 0152 / 22 88 70 25
ralf.schnichels@roehm.biz
North Rhine-Westphalia: Friedhelm Schneider
Tel 0 27 62 / 49 07 28
Mobile 0152 / 22 88 70 17
friedhelm.schneider@roehm.biz
North Rhine-Westphalia /Lower Saxony Thorsten Nolte
Tel 0 27 21 / 12 01 82
Mobile 0152 / 22 88 70 31
thorsten.nolte@roehm.biz
Lower Saxony / SaxonySusanne Bormann
Mobile 0152 / 22 88 70 88
susanne.bormann@roehm.biz
Berlin, Mecklenburg-Western Pomerania, Brandenburg, Saxony-Anhalt: Hendrik Seifert
Tel 0 30 / 70 07 24 59
Mobile 0152 / 22 88 70 32
hendrik.seifert@roehm.biz
Hesse:Klaus Dieter Hofmann
Tel 0 64 06 / 90 67 40
Mobile 0152 / 22 88 70 29
k.d.hofmann@roehm.biz
Hamburg / Bremen /Schleswig-Holstein /Lower Saxony:Willi Phillip Hövermann
Mobile 0152 / 22 88 71 48
WilliPhillip.Hoevermann@roehm.biz
Algeria:RÖHM S.A.R.L.
325, rue Paul Langevin
60740 St. Maximin, FRANCE
Tel 0033 / 344 64 10 00
Fax 0033 / 34 64 00 68
fr.roehm@roehm.biz
www.rohm.fr
Argentina: Himaq S.R.L.,
Venezuela 3652,
1603 Villa Martelli
Prov. Buenos Aires
Tel 00 541 / 147 093 505,
Fax 00 541 / 147 093 472
himaq@himaq.com.ar
Australia: RÖHM Asia Pacific Pte. Ltd.
8 Ubi Road 2
#07-10 Zervex
Singapore 408538
Tel 0065 – 64 43 77 48
Mobil 0065 – 83 28 89 80
info@sg.roehm.biz
www.sg.roehm.biz
FISHER LAMCO PTY LTD
Tel 0061 1300 838 572
mark.hughes@fisherlamco.com.au
Austria: Richard Schörkhuber
Lichtenhof 2 b
8511 St. Stefan ob Stainz
Tel 00 43 / 34 63 / 8 15 10
Fax 00 43 / 34 63 / 8 15 60
Mobil 00 43 / 664 / 9 23 77 10
richard.schoerkhuber@roehm.biz
Schachermayer GmbH,
Schachermayer Str. 2
Postfach 3000, 4021 Linz
Tel 00 43 / 732 / 65 99-0
Fax 00 43 /732 / 65 99 14 44
maschinenmetall@schachermayer.at
Lackner u. Urnitsch GmbH
Bahnhofgürtel 37, 8020 Graz
Tel 00 43 / 316 / 71 14 80-0
Fax 00 43 / 316 / 71 14 80 39
lackner@urnitsch.at
Haberkorn Ulmer GmbH
Hohe Brücke, 6961 Wolfurt
Tel 00 43 / 55 74 / 69 5-0
Fax 00 43 / 55 74 / 69 5-99
nfo.wolfurt@haberkorn.com
Metzler GmbH u. Co. KG
Oberer Paspelsweg 6-8, 6830 Rankweil
Tel. 00 43 / 55 22 / 7 79 63 - 0
Fax 00 43 / 55 22 / 7 79 63 - 6
office@metzler.at
Belarus:RÖHM GmbH
Heinrich-Röhm-Straße 50
89567 Sontheim (Germany)
Tel 0049 73 25 – 16 0
info@roehm.biz
www.roehm.ru
Belgium: RÖHM S.A.R.L.
325, rue Paul Langevin
60740 St. Maximin, FRANCE
Tel 0032 495 72 73 99
Fax 0032 42 86 69 48
frederik.hamels@roehm.biz
www.rohm.fr
BELTRACY
Bergensesteenweg 189
1600 Sint-Pieters-Leeuw
BELGIUM
Tel. 00 32 / 25 43 68 90
Fax 00 32 / 25 38 59 10
info@beltracy.be
www.beltracy.be
Canada:ROHM Products of America
2500 Northlake Drive, 30024 Suwanee, GA
Tel 001 – 770 - 963 - 8440
Fax 001 – 770 - 963 - 8407
rohmusa@roehm.biz
www.us.roehm.biz
Sales Agents in Germany Agents worldwide
Chile: Robert Kralemann
SERVICOMP Ltda.
Av. Departamental 1595
La Florida - Santiago
Tel 00 56 / 2 / 8 89 47 00
rkralemann@gmail.com
Colombia: RÖHM IND. E COM. DE
FERRAMENTAS DE FIXAÇÃO LTDA.
Rod. Raposo Tavares, Km 14 - Bloco A
2º andar - sala 2 - CEP 05576-100
São Paulo
Tel 0055 – 11 – 37 32 22 22
Fax 0055 – 11 – 37 35 30 97
vendas@rohm.com.br
www.br.roehm.biz
Costa Rica: RÖHM IND. E COM. DE
FERRAMENTAS DE FIXAÇÃO LTDA.
Rod. Raposo Tavares, Km 14 - Bloco A
2º andar - sala 2 - CEP 05576-100
São Paulo
Tel 0055 – 11 – 37 32 22 22
Fax 0055 – 11 – 37 35 30 97
vendas@rohm.com.br
www.br.roehm.biz
Croatia: PFEIFER - TTI D.O.O.
40000 Cakovec, Croatia
Tel 00 385-9/ 83 03 52 2
Fax 00 385-1/ 36 39 53 0
marijan.pfeifer@pfeifer-tti.hr
Denmark:Ryttergaard Tools A/S
Falkevej 13
3400 Hillerød
Dänemark
+45 36 41 22 66
info@ryttergaard.com
Ecuador: RÖHM IND. E COM. DE
FERRAMENTAS DE FIXAÇÃO LTDA.
Rod. Raposo Tavares, Km 14 - Bloco A
2º andar - sala 2 - CEP 05576-100
São Paulo
Tel 0055 – 11 – 37 32 22 22
Fax 0055 – 11 – 37 35 30 97
vendas@rohm.com.br
www.br.roehm.biz
Egypt:Dirk Jaegemann Trade Agency
GmbH&Co.KG
28279 Bremen
Tel 0049 / 42 18 39 21 30
Fax 00 49 / 42 18 39 89 21
info@djta.de
Finland: Teräskonttori Oy,
Muuntotie 3,
1510 Vantaa
Tel 00 358 / 10 219 22 00
Fax 00 358 / 10 219 22 45
info@teraskonttori.fi
Oy Interfii Ltd.
Teollisuuskatu 35-39 LH4
20520 Turku, Y-tunnus 2374026-3
Tel 00 358 / 2 01 47 45 00
Fax 00 358 / 2 01 47 45 01
info@interfii.com
Greece: K.S.PAPADOPOULOS & CO
Ethnikis Antistaseos Str. 7-A
55134 Thessaloniki - Greece
Tel 0030 2310 488758
Fax 0030 2310 488753
stefanos@agent.com.gr
ntinos@agent.com.gr
India:RÖHM Asia Pacific Pte. Ltd.
8 Ubi Road 2
#07-10 Zervex
Singapore 408538
Tel 0065 – 64 43 77 48
Mobil 0065 – 83 28 89 80
info@sg.roehm.biz
www.sg.roehm.biz
Agents worldwide
Marocco: RÖHM S.A.R.L.
325, rue Paul Langevin
60740 St. Maximin, FRANCE
Tel 0033 / 344 64 10 00
Fax 0033 / 34 64 00 68
fr.roehm@roehm.biz
www.rohm.fr
New Zealand:RÖHM Asia Pacific Pte. Ltd.
8 Ubi Road 2
#07-10 Zervex
Singapore 408538
Tel 0065 – 64 43 77 48
Mobil 0065 – 83 28 89 80
info@sg.roehm.biz
www.sg.roehm.biz
Trade Tools Ltd
23 Olive Road, Penrose
PO Box 112114
Auckland 1642, New Zealand
Tel 0064 9 525 88 82
sales@tradetools.co.nz
Netherlands:Boorwerk B.V.,
Flevolaan 52 A,
Industrieterrian Noord
1382 JZ Weesp
Tel 00 31 / 294 / 43 20 50
Fax 00 31 / 294 / 43 21 52
mail@boorwerk.nl
RÖHM S. A. R. L.
325 rue Paul Langevin
BP 90204
F-60744 Saint Maximin cedex
Tel 0033 – 344 64 10 00
Fax 0033 – 344 64 00 68
fr.roehm@roehm.biz
www.rohm.fr
Norway: Ing. Yngve Ege A/S
Ryenstubben 5
0679 Oslo 11
Tel 00 47 / 23 24 10 00
Fax 00 47 / 23 24 1001
ege@ege.no
Peru: RÖHM IND. E COM. DE
FERRAMENTAS DE FIXAÇÃO LTDA.
Rod. Raposo Tavares, Km 14 - Bloco A
2º andar - sala 2 - CEP 05576-100
São Paulo
Tel 0055 – 11 – 37 32 22 22
Fax 0055 – 11 – 37 35 30 97
vendas@rohm.com.br
www.br.roehm.biz
Philippines: RÖHM Asia Pacific Pte. Ltd.
8 Ubi Road 2
#07-10 Zervex
Singapore 408538
Tel 0065 – 64 43 77 48
Mobil 0065 – 83 28 89 80
info@sg.roehm.biz
www.sg.roehm.biz
Nicklaus Machinery Corporation
1795 Malabon Street
Sta. Cruz, Manila 1014 Philippines
Tel. +63 2 7118414
Mobil +63 917 8278812
nmcservice@yahoo.com
www.nicklaus-machinery.com
Romania:KSN Technik Srl
Str. Tabacarilor 15B/103
400139 CLUJ-NAPOCA, Romania
Tel 00 40 / 264 / 449 - 533
Fax 00 40 / 264 / 449 - 533
office@ksntechnik.ro
Russia:RÖHM GmbH
Heinrich-Röhm-Straße 50
89567 Sontheim (Germany)
Tel 0049 73 25 – 16 0
info@roehm.biz
www.roehm.ru
Saudi Arabia, UAE, Bahrain, Kuwait, Oman, Quatar, Kazakhstan,Lebanon: RÖHM Asia Pacific Pte. Ltd.
8 Ubi Road 2
#07-10 Zervex
Singapore 408538
Tel 0065 – 64 43 77 48
Mobil 0065 – 83 28 89 80
info@sg.roehm.biz
www.sg.roehm.biz
COBALT ME FZE
SAIF ZONE
QI-05-077/C
Sharjah, VAE
Tel. +971 5568 34422
sales@cobalt-me.com
Sweden: Techpoint Systemteknik AB
Nyponvaegen 4
19144 Sollentuna
Tel 00 46 / 86 23 13 30
Fax 00 46 / 86 23 13 45
info@techpoint.se
Luna AB
Sandbergsvägen 3,
44180 Alingsâs
Tel. 00 46 / 322 60 60 00
Fax 00 46 / 322 60 62 03
info@luna.se
Singapore: RÖHM Asia Pacific Pte. Ltd.
8 Ubi Road 2
#07-10 Zervex
Singapore 408538
Tel 0065 – 64 43 77 48
Mobil 0065 – 83 28 89 80
info@sg.roehm.biz
www.sg.roehm.biz
GP System Singapur PTE LTD
No. 51, Bukit Batok Crescent,
#04-04/05 Unity Centre,
Singapur 658077
Tel. 00 65 / 68 61 - 26 63
Fax 00 65 / 68 61 - 35 00
enquiry@gpsystem.com
Slovenia: B T S COMPANY TRGOVINA IN
ZASTOPANJE, D.O.O.
Bratislavka 5
1000 Ljubljana
Tel 00 38 / 6 1 584 14 40
masa.bitenc@bts-company.si
South Africa: Supra Tooling and Accessoires (Pty) Ltd
P.O. Box 1892
1460 Boksburg, Gauteng
South Africa
Tel. 0027 6467 4284
Fax 0027 11918 5492
supratoolig@mweb.co.za
www.supratooling.co.za
Tooling Promotions
P.O. Box 3989
Vanderbijlpark 1900, Gauteng
South Africa
Tel 0027 016 931 1266
Fax 0027 016 931 1269
info@toolingpromotions.co.za
www.toolingpromotions.co.za
South Korea: RÖHM Asia Pacific Pte. Ltd.
8 Ubi Road 2
#07-10 Zervex
Singapore 408538
Tel 0065 – 64 43 77 48
Mobil 0065 – 83 28 89 80
info@sg.roehm.biz
www.sg.roehm.biz
CHEONG DO MACHINE TOOL CO., LTD.
RM A-6-103, 604-1, KURO-DONG
KURO-KU, SEOUL, KOREA
Tel + 82 2 2678 4155
cdmt@chol.com
www.cdmt.co.kr
KMC Co., Ltd.
Zip code 15090
42-404, 204, Gongdan 1-daero,
Siheung-si, Gyeonggi-do, Korea
Tel +82 31 430 67 89
chelee@naver.com
www.entkr.com
Thailand: RÖHM Asia Pacific Pte. Ltd.
8 Ubi Road 2
#07-10 Zervex
Singapore 408538
Tel 0065 – 64 43 77 48
Mobil 0065 – 83 28 89 80
info@sg.roehm.biz
www.sg.roehm.biz
Krasstec Company Limited
1205 Rama9 Soi 55, Rama 9 Rd,
Suan Luang, Suan Luang
Bangkok 10250 Thailand
Tel 66 (0)2 732 1144
Mobile 66 (0) 81 941 0509
chaithat@krasstec.com
Tunisia: RÖHM S.A.R.L.,
325 rue Paul Langevin
60740 St. Maximin, FRANCE
Tel. 00 33 / 3 44 64 10 00
Fax 00 33 / 3 44 64 00 68
fr.roehm@roehm.biz
Turkey:Sintek Mühendislik Makina San.
Ve Tic. Ltd. Sti.
Tarabya Mahallesi
Yumak Sok. No: 3/A1
34457 SARIYER – ISTANBUL
Tel. 00 90 / 212 / 2 99 61 84
Fax 00 90 / 212 / 2 99 56 75
sinan.onurlu@sintekmuhendislik.com
Ukraine: Denis Alexandrov
Official Sales Consultant Russia
on behalf of RÖHM GmbH
Tel. +7 985 110 12 34
denis.alexandrov.external@roehm.biz
www.roehm.ru
Venezuela: RÖHM IND. E COM. DE
FERRAMENTAS DE FIXAÇÃO LTDA.
Rod. Raposo Tavares, Km 14 - Bloco A
2º andar - sala 2 - CEP 05576-100
São Paulo
Tel 0055 – 11 – 37 32 22 22
Fax 0055 – 11 – 37 35 30 97
vendas@rohm.com.br
www.br.roehm.biz
Vietnam: RÖHM Asia Pacific Pte. Ltd.
8 Ubi Road 2
#07-10 Zervex
Singapore 408538
Tel 0065 – 64 43 77 48
Mobil 0065 – 83 28 89 80
info@sg.roehm.biz
www.sg.roehm.biz
CUONG ANH MACHINERY CO., LTD
2/27 Hoang Nhu Tiep, Bo De.
Long Bien, Hanoi, Vietnam
Hanoi Office: Suite 1005 - B. HH2B
Building, Gia Thuy Street, Long Bien
District, Hanoi, Vietnam
+ 84 24 3872 3571
Ho Chi Minh City Office:
Suite 501, No 67 Pho Quang Street, 2 Ward,
Tan Binh District, Ho Chi Minh City, Vietnam
Tel 0283 547 0769
contact@cuonganhvn.com
www.cuonganhvn.com
§ 1 Offer, conclusion of contract and contractual contents1. Our Terms of Sale shall apply exclusively; we do not recognise contradictory terms and conditions or terms and conditions which deviate from our Terms of Sale unless we had explicitly approved their validity in writing. Our Terms of Sale shall also apply if we carry out the delivery to the buyer without reservation in the knowledge of contradictory terms and conditions of the buyer or terms and conditions which deviate from our Terms of Sale.2. Our Terms of Sale shall only apply towards an entrepreneur within the meaning of Section 14 BGB [German Civil Code].3. Our General Service Terms shall apply with precedence over these Terms of Sale in the respective valid version in cases, which comprise the service offer of RÖHM GmbH.4. Our offers are always to be understood as invitatio ad offerendum and are therefore without obligation insofar as they have not explicitly been described as binding. The contract shall only be concluded with our written confirmation and in line with its conten-ts and – if a written confirmation is missing – by the service/delivery. If a delivery/service is carried out immediately without a confirmation then the invoice shall at the same time be deemed as an order confirmation. 5. Costs for the production of drawings for special constructions are to be borne by the orderer insofar as the offer does not lead to an order for reasons, for which we are not responsible.6. All details concerning weights, dimensions, services and technical data, which are contained in our printed material, catalogues, price lists or in other contractual docu-ments, merely serve for purposes of information and are only binding insofar as they are explicitly described as binding.7. We reserve the right to make construction and form changes to the object of contract insofar as no changes are made hereto, which are deemed unreasonable for the orderer.8. The documentation consists of the compilation drawing, the BOM with marking of the parts subject to wear and tear and spare parts as well as assembly instructions upon request. Respectively in German and/or, upon request, in English. This free documenta-tion will be supplied in a digital form. The PDF format shall apply to drawings, BOMs and texts. Any scope of documentation beyond this is liable to costs respectively requires a special agreement. The documents may not be reproduced in full or in part, not made accessible to third parties or used for any other purpose apart from that for which they were handed over to the customer without our prior written authorization.9. The corresponding measurement methods for tests, with which certain temperatures, times and other measured or control values should apply, must be stipulated before start of delivery and recognised by both parties. If no stipulation is made the measure-ment methods usually applied by RÖHM shall apply, we shall provide the details thereof upon request.10. Samples will only be supplied against payment and owing to a separately placed order.11. Assurances, collateral agreements and amendments to the contract require a writ-ten form in order to be valid. This requirement cannot be waived orally.12. Placed orders are irrevocable unless the supplier has approved the revocation in writing.13. In case of export business the delivery is carried out at the conditions agreed on the order confirmation, the international regulations for the interpretation of customary contractual forms shall apply in addition (incoterms 2010 of the International Chamber of Commerce, respective valid status).14. Our General Business Terms shall apply to the RÖHM online shop with the following supplementations: a) The offer on the part of the customer is submitted binding as soon as the customer orders the products in the shopping basket by using the function „binding order“. b) A purchase in the online shop is only possible if the customer actively agrees to our General Business Terms. c) Mistakes and errors with regard to the goods availability, prices and other details and data excepted. Diagrams in the online shop are merely for the purpose of illustration respectively as visual aids; the description is binding. d) We will inform the customer if the product ordered by the customer is temporarily or permanently not available. 15. Our „product information“, technical information leaflets as well as other product-specific publications shall apply in addition to the General Business Terms. These are always to be complied with in their current version.
§ 2 Prices1. In the absence of special written agreements the prices in the Federal Republic of Germany shall apply „carriage paid“ recipient plus the statutory value added tax. With export business the object of delivery shall be deemed as sold „ex works“ if nothing is determined in the contract concerning the type of sale. A processing fee of EUR 15.00 will be charged for individual orders with a goods value of less than EUR 150.00 net, a processing fee of EUR 30.00 for orders with a goods value of less than EUR 50.00 net respectively plus the applicable rate of value added tax. This shall apply to deliveries within the domestic country and overseas. At the customer’s request the goods can be delivered to an alternative shipping address against a logistics fee in the amount of EUR 10.00.2. We would like to point out that we will only carry out the shipment at the customer’s request. This shall have no effect on the regulations according to Section 5.3. We shall charge the prices valid upon conclusion of the contract, which are based on the cost factors which are valid at this time. Should these cost factors (in particular ma-terial, wages, energy, etc.) change between conclusion of the contract and the agreed delivery time then we are entitled to make a corresponding change to the prices. In case of export business the supplier is entitled to terminate the contract extraordinarily with regard to the part of the order that has not yet been completed or to adjust the prices for this accordingly in the event of a substantial devaluation in the currency, in which the order is concluded. 4. In case of conclusion ex works the goods will be conveyed at the costs and risk of the orderer. With all other consignments the provisions stipulated in the incoterms 2010, respective valid status, will apply with regard to insurance and the assumption of risks. 5. We will inform the buyer of our production quantity for parts/products, which are pro-duced especially according to the buyer’s requests. The buyer undertakes to purchase the quantities confirmed to him.6. Excess and shortfalls in deliveries of up to 5 %, with special tools up to 10 %, at least however 2 pieces, are permitted and do not substantiate any quality defects. The respective delivery will be charged.
§ 3 Terms of payment1. In the absence of a special agreement the payment is to be made without any deduc-tion free paying agent within 10 days after the invoice date – also with partial deliveries. 2. In case of default of payment interest will be charged in the amount of the credit costs charged by banks, at least however interest in the amount of 9 % above the respective base lending rate of the ECB.3. In case of export business the payments are to be made in line with the agreed terms of payment.4. Costs of the payment transactions, in particular bank charges for overseas transfers to us, shall principally be for the expense of the customer.
§ 4 Delivery time1. The start of the delivery deadline stated by us presumes the clarification of all tech-nical questions. Delivery dates stated by us are – insofar as not explicitly agreed or de-scribed as binding – non-binding and shall merely represent an expected delivery date.2. The compliance with our delivery obligation further presumes the timely and proper fulfilment of the buyer’s obligations, in particular the compliance with the agreed terms of payment. The right is reserved to the plea of the unfulfilled contract. This right shall also consist of obligations from previous deliveries which have not been satisfied in full.3. The delivery deadline shall begin with the sending of the order confirmation, however not before the provision of the documents, permit, releases, etc., which are to be pro-cured by the orderer, as well as not before the receipt of the agreed down payment.4. If a binding delivery date has been agreed then the supplier also has to deliver within the deadline. The delivery deadline shall have been adhered to if the object of delivery has left the plant by the time it expires or notification has been given that the object is ready for delivery, the right is reserved to the timely and correct self-delivery. If the orde-rer changes his order with regard to parts of the delivery then the delivery deadline shall only begin to apply new again with the confirmation of the change.5. Force majeure, war, civil commotion, strike, lock-out or measures of authorities, no matter for what reason, which oppose a delivery, as well as deficiencies of raw materials, of transport means as well as theft – also at the sub-suppliers – shall release the supplier from the obligation to deliver within the agreed deadline. The orderer is to be notified immediately of the occurrence of the event and of the expected implications.6. Deliveries before expiry of the delivery time and in reasonable parts are permitted.7. The adherence to the delivery time presumes the fulfilment of the orderer’s contractual obligations.8. The regulations of Subclause 10 shall apply in the event of the delay in delivery or impossibility.
§ 5 Passing of risk and acceptance1. The risk shall pass to the orderer by no later than with the despatch of the delivered parts also if partial deliveries are made or we have taken over other services e.g. the shipping costs or delivery to the location and installation.2. At the orderer’s request the shipment shall be insured by us against theft, damages caused by breakage, transport, fire and water and other insurable risks at his costs.3. If the shipment is delayed as a result of circumstances, for which the orderer is re-sponsible, then the risk shall pass to the orderer from the day upon which the goods are ready for shipment; however we are obliged to procure the insurances, which he requests, at the request and costs of the orderer.4. Delivered objects are, even if they feature insignificant features, to be accepted by the orderer irrespective of the rights from Section 8.
§ 6 Delay in acceptance, order on call1. If the orderer does not accept the object of contract within the deadline we are en-titled to set him a reasonable final deadline, to dispose otherwise over the object after its expiry and to supply the orderer with a reasonably extended deadline. Our rights to cancel the contract under the pre-requisites of Section 326 BGB and to request dama-ges owing to the non-fulfilment shall remain unaffected hereby. If we request damages owing to non-fulfilment we can request 40 % of the agreed price plus value added tax as compensation unless the orderer proves less damages. We reserve the right to assert higher actual damages.2. Orders, which are confirmed by us on call, must – insofar as nothing special has been agreed – be accepted by no later than within one year from the order date. The same shall apply in case of date reservations or sustainable „on call position“. Subclause 6.1 shall apply accordingly in case the goods are not called within the stated deadline.
§ 7 Reservation of title1. The objects of the deliveries (reserved goods) shall remain our property until the ful-
filment of all claims to which we are entitled against the buyer from the business rela-
tionship. Insofar as the value of all security rights, to which we are entitled against the
buyer, exceed the amount of all secured claims by more than 10 %, we will release a
corresponding part of the security rights at the buyer’s request.
2. During the existence of the reservation of title the buyer is prohibited from a pledge
or assignment as collateral and the resale only permitted for resellers in the customary
course of business and only under the condition that the reseller receives a payment
from his customer or stipulates the reservation that the property shall only pass to the
customer when he has satisfied his payment obligations.
3. In case of attachments, seizures or other disposals or interventions of third parties the
buyer has to inform us immediately so that we can file an action according to Section
771 ZPO [German Code of Civil Procedure]. Insofar as the third party is not in the position
to reimburse us the court and out-of-court costs of an action according to Section 771
ZPO, the buyer will be liable for the loss incurred to us.
4. The buyer undertakes to treat the object of purchase with due care and attention; he
is in particular obliged to sufficiently insure these at the value as new at his own costs
against damages caused by fire, water and theft. Insofar as maintenance and inspection
work is necessary the buyer must carry this out in time at his own costs.
General Terms of Sale and Delivery
5. In case of breaches of duty by the buyer, in particular with default of payment we are
entitled to cancellation and to take the goods back; the buyer is obliged to hand the
goods over. The taking back of goods respectively the assertion of the reservation of
title does not require any cancellation of the supplier; these acts or an attachment of the
reserved goods by us shall not represent a cancellation of the contract unless we had
explicitly declared this.
6. If the buyer has resold the object of purchase in the ordinary course of business then
he shall hereby now already assign all claims to us in the amount of the final invoice
amount (including value added tax) of our claim, to which he is entitled from the resale
against his buyers or third parties, irrespective of whether the object of purchase has
been resold without or after processing. The buyer shall also remain authorized to collect
this claim after the assignment. Our authorization to collect the claim ourselves shall
remain unaffected hereby. However, we undertake not to collect the claim as long as the
buyer satisfies his payment obligations from the collected proceedings, is not in default
of payment and in particular no application has been filed for the opening of insolvency
proceedings or payments have been suspended. If this is however the case we can re-
quest that the buyer announces the assigned claims and their debtors to us, provides us
all details which are necessary for the collection, hands over the associated documents
and informs the debtors (third parties) of the assignment.
7. The processing or conversion of the object of purchase by the buyer is always carried
out on our behalf. If the object of purchase is processed with other objects, which do
not belong to us, then we shall acquire the co-ownership to the new object in the ratio
of the value of the object of purchase (end invoice amount, including value added tax)
to the other processed objects at the time of the processing. Incidentally, the same shall
apply to the object produced by processing as to the object of purchase delivered under
reservation.
8. If the object of purchase is inseparably mixed with other objects that do not belong to
us then we shall acquire the co-ownership to the new object in the ratio of the value of the
object of purchase (end invoice amount, including value added tax) to the other mixed
objects at the time of the mixing. If the mixing is carried out to the extent that the object
of the buyer is to be seen as the main object then it shall be deemed as agreed that the
buyer assigns us the pro rata co-ownership. The buyer shall store the thus produced sole
ownership or co-ownership on our behalf.
§ 8 Quality defectsWe shall be liable for quality defects as follows:
1. All those parts or services are to be subsequently improved free of charge at our
choice, delivered or provided new, which – irrespective of the operating duration – feature
a quality defect if this cause existed already at the time when the risk was passed.
2. Claims for quality defects shall become statute-barred in 12 months. The deadline will
begin with the passing of the risk (Subclause 6).
3. The buyer has to report quality defects to us immediately in writing.
4. In case of reports of defects payments of the buyer may be withheld in a scope,
which is in reasonable relation to the occurred quality defects. If the defect is unjustifiably
reported we are entitled to request reimbursement of the expenses incurred to us by
the buyer.
5. We are first of all always to be granted the opportunity for the subsequent fulfilment
within a reasonable period of time.
6. If the subsequent fulfilment fails the buyer can – irrespective of possible claims for
damages – cancel the contract or reduce the remuneration. The buyer can only request
reimbursement for fruitless expenses if we are responsible for the defect owing to wilful
intent or gross negligence.
7. Defects shall not exist with an only insignificant deviation from the agreed conditions,
with an only insignificant impairment to the usability, with natural wear and tear or da-
mages, which are caused after the risk has passed as a result of faulty or negligent
treatment, excessive use, unsuitable operating equipment or owing to special external
influences, which are not presumed according to the contract, as well as with software
faults that cannot be reproduced. If improper changes or repair work is carried out by the
buyer or by third parties then this and the thus incurred consequences shall not substan-
tiate any defects either. The same shall apply if our stipulations concerning the handling
and other instructions are not complied with and a proper maintenance is not carried out.
8. Claims of the buyer owing to the expenses, which are necessary for the purpose of the
subsequent fulfilment, in particular transport, route, labour and material costs, are exclu-
ded if the expenses increase, because the object of the delivery has subsequently been
taken to another location than the buyer’s branch unless the transportation corresponds
with its use as intended.
9. Statutory claims for recourse of the buyer against us shall only exist to the extent that
the buyer has not reached any agreements with its buyer that go beyond the statutory
claims for defects.
10. Subclause 9 shall apply to claims for damages. Further or other than claims regulated
in this Subclause or in Subclause 9 owing to a quality defect are excluded.
§ 9 Industrial property rights and copyrights, defects of titleInsofar as not otherwise agreed, we are obliged to merely provide the delivery in the
country of the place of delivery free of industrial property rights and copyrights of third
parties (hereinafter property rights). Insofar as a third party asserts justified claims owing
to the infringement of property rights due to deliveries provided by us and used as per
contract against the buyer, we shall be liable towards the buyer as follows within the
deadline determined in Subclause 8.2:
1. We will, at our choice and at our costs, either obtain a right of use for the deliveries
concerned, change these so that the property right is not infringed, or exchange these.
If this is not possible for us at reasonable conditions, the buyer shall be entitled to the
statutory rights to cancellation or reduction. The buyer can only request reimbursement
for fruitless expenses if we are responsible for wilful intent or gross negligence. Our obli-
gation to pay compensation is oriented to Subclause 10.
2. The afore-mentioned obligations shall only exist if the buyer informs us immediately
in writing about the claims asserted by third parties, does not recognise an infringement
and we reserve the right to all defence measures and settlement negotiations. If the buyer
discontinues the use of the delivery for reasons to minimise damages or for other impor-
tant reasons he undertakes to inform the third party that the discontinuation of the use is
not associated with a recognition of an infringement of a property right.
3. Claims of the buyer are excluded insofar as he is responsible for the infringement of
property right.
4. Claims of the buyer are further excluded insofar as the infringement of property right is
caused by special stipulations of the buyer, due to an application that is not foreseeable
for us or by the fact that the delivery is changed by the buyer or is used together with
products not delivered by us.
5. In the event of infringements of property rights the provisions of Subclauses 8.4, 8.5
and 8.9 shall apply accordingly to the claims of the buyer regulated in Subclause 13.
6. Further or other claims of the buyer against us or our vicarious agents owing to a
defect of title than those regulated in this Subclause 9 are excluded.
§ 10 Joint and several liability1. Claims of the buyer for damages – irrespective of the legal nature of the asserted
claim – are excluded.
2. Excluded from this are:
a) Damages owing to the breach of essential contractual obligations. Deemed as essen-
tial are such contractual obligations, the fulfilment of which makes the proper execution
of the contract possible at all and on the compliance with which the contractual partner
may as a rule rely and depend on.
b) Damages from the injury to life, the body or the health if we are responsible for the
breach of obligation.
c) For other damages, which are due to a wilful or grossly negligent breach of duty,
whereby our breach of duty is deemed equivalent to that of our legal representatives or
vicarious agents.
d) Liability according to the ProdHaftG [German Product Liability Act]
3. A change to the burden of proof for the disadvantage of the buyer is not associated
with the afore-mentioned regulations.
4. Insofar as the liability for damages is excluded or limited against us, this shall also apply
with regard to the personal liability for damages of our employees, our commercial agents
and our vicarious agents.
§ 11 Obligations of the buyer to provide assistance1. Assistance services of the buyer, which are explicitly or tacitly agreed within the
framework of the contract, shall be carried out without a special remuneration unless
explicitly otherwise agreed.
2. The buyer is obliged to inform us about all facts in time, from which it can be derived
that goods and products in stock in our company, which we have made available with
regard to the production capacities reported to us, cannot be used or not used in full. If
residual stocks remain the buyer shall take over the stocks and the, if applicable incurred
destruction costs in the event of a premature change to its material scheduling. This shall
also apply to products, with which we had to order minimum quantities on the part of our
suppliers if we have informed the customer hereof in advance.
3. The buyer guarantees that the products supplied by him for processing are suitable for
this purpose. We are not obliged to examine the products supplied by the buyer for the
condition and the suitability for the further processing. Within the framework of ongoing
business relationships as well as if an object for processing has initially been inspected,
tested and released, the buyer undertakes to inform us of each product change without
request in writing. In the case of regular processing of objects the buyer is further obliged
to examine the object that is to be processed by us for deviations and changes for each
change to the production conditions and in his company, in particular with the exchange
of tools, machines or with the introduction of new production processes and to notify us
of such changes and modifications in writing.
4. We do not have to examine the instructions of our buyers, the material selection or
other regulations, which are made by our buyer, for their accuracy.
5. Therefore, the buyer has to examine all instructions, which he issues as well as the
quality of the materials stipulated or made available to us for the compliance with the
statutory and technical regulations.6. If the buyer is in default with regard to his obligation for provision or to provide
assistance after a written warning we are entitled to the statutory rights.
7. Goods may only be returned with the supplier’s express permission. Any returned
goods must be delivered free in their original packaging and must be accompanied by
the return receipt provided by the supplier. The goods must be in their original state, i.e.
undamaged and fully functional. Returned goods will no longer be accepted when six
months have lapsed from the date of delivery. Returns of specially designed or custom-
made items, as well as used goods will not be accepted. We will charge a handling fee of
20 % - 40 % of the value of the goods, however, at least EUR 100 per item plus statutory
VAT. Following presentation of appropriate evidence, the supplier reserves the right to
charge a higher amount to the purchaser in individual cases; the purchaser is free to
prove that the damage was lower.
§ 12 Place of performance and place of jurisdiction/miscellaneous1. The place of performance and place of payment is the registered seat of our
company in Sontheim/Brenz.
2. The law of the Federal Republic of Germany is to be exclusively applied to the
contractual relationship. The application of the Convention of the United Nations of
11 April 1980 concerning Contracts for the International Sale of Goods (CISG „Law
governing the sale of goods of Vienna“) is excluded.
3. With all disputes ensuing from the contractual relationship, if the orderer is a
merchant, a legal entity under public law or a special fund under public law, the action
is to be filed at the court that has jurisdiction for our headquarters. We are also entitled
to file action at the headquarters of the orderer.
4. We store your data according to Section23 Federal Data Protection Act.
RÖHM GmbH
89565 Sontheim (Germany)
Status: July 2019
General Terms of Sale and Delivery
1. Validity1.1 These ASB form the basis for all business transactions with our customers, which
refer to the repair or maintenance of the products manufactured or delivered by us in-
sofar as these customers concern entrepreneurs within the meaning of Section 14 BGB
[German Civil Code].
1.2 Contradictory, supplementary contractual terms and conditions of the customer or
those which deviate from these ASB will not be recognised.
1.3 Within the framework of a regular business relationship these ASB will also be valid
after the effective inclusion for the first time if we do not explicitly refer hereto in follow-up
transactions.
1.4 Insofar as the ASB do not include any regulations, the General Terms of Sale and
Delivery of RÖHM GmbH shall apply.
2. Offer and conclusion of the contract2.1 Our offers are – insofar as not explicitly marked as binding – without obligation and
merely to be understood as invitatio ad offerendum. The right is reserved to an interim
sale.
2.2 Contracts with us will only be concluded with our written acceptance declaration or
– if such is not carried out – by our delivery and service. Changes and supplementations
to the contracts concluded with us require a written form.
2.3 If the object of maintenance or repair was not delivered by us then the customer
has to point out existing industrial property rights with regard to the object if we are not
responsible for any fault the customer shall indemnify us from possible claims of third
parties from industrial property rights.
2.4 Insofar as we are responsible for negligence Par. 2.3 shall apply accordingly.
3. Contractual parts The offer and the product list respectively available to us and the customer are a part of
the contract.
4. Technical documents and plans4.1 All rights to our offer documents as well as documents, which have been handed
over, shall remain reserved.
4.2 The customer shall recognise our rights and will not reproduce the documents in full
or in part, not make these accessible to third parties or use these for any other purpose
than that for which they were handed over to him without our prior written authorization.
5. Scope of services, maintenance, condition of device, repair5.1 Decisive for the scope of our delivery and service is our binding offer or – if such is
not available – our written declaration of acceptance. Both individual services can be
agreed, which are principally to be remunerated according to Subclause 12.1, as well
as the service packages described under Subclause 5.2, which are to be remunerated
according to 12.2 respectively 12.3.
5.2 The following activities are a part of our service obligation with the processing of
service packages:
5.2.1 Commissioning of service
- skilled execution of the necessary commissioning of the clamping device and control
at the place of installation in line with the regulations of the manufacturer.
- assembly work over the course of the commissioning together with the machine
manufacturer
- first instructions and operator training
- we will invoice separate requests for the training with regard to the maintenance and
use as separate work.
5.2.2 Inspection service
Skilled execution of the necessary inspection of the clamping device and control at the
place of installation in line with the regulations of the manufacturer. Insofar as additional
maintenance or repairs become necessary at the customer’s request or owing to special
loads, these are to be remunerated separately by the customer.
5.2.3 Maintenance service
Skilled execution of the necessary maintenance of the clamping device and control at the
place of installation in line with the regulations of the manufacturer. Insofar as additional
repairs become necessary at the customer’s request or owing to special loads, these are
to be remunerated separately by the customer.
5.3 The service obligation shall begin with the purchase or conclusion of a service pa-
ckage. With the purchase or conclusion of a service package after the expiry of the
warranty period the service obligation of RÖHM shall only refer to such products, which
are capable of use and free of defects at the time of the conclusion or purchase of the
service package. This is to be ensured by an inspection of the products; if defects are
determined these are to be remedied before the start of validity of the service package by
a necessary repair liable to costs; this repair is not part of the service package.
5.4 Our service obligation shall not include carrying out work on products and accesso-
ries, which was(were) not delivered by us.
5.5 Our service obligation shall lapse if the product was not subjected to the function
and safety tests according to the details in the operating instructions or third parties have
carried out work on the products concerned without our prior written consent unless this
work has no disadvantageous influence on the provision of our service. The same shall
apply if the products have been damaged due to causes for which we are not responsi-
ble, for example by water, fire, stroke of lightning or other implications of force majeure as
well as with improper treatment by the customer or third parties.
5.6 Depending on the use and type of the product an overhaul may be necessary after
longer use. This is the case if the costs of a repair exceed the current value of the pro-
duct. Overhaul within this meaning is also the necessary new acquisition of a product in
the absence of available spare parts. Overhauls are not part of the service obligation wi-
thin the service packages. If we are of the opinion that a products that is to be maintained
by us under a service package requires an overhaul, we will inform the customer hereof
by stating the current value estimated by us and submit an offer for the overhaul to the
customer with a remuneration calculated according to 12.1.
6. Repair/service that cannot be carried out6.1 The services provided concerning the details of a cost estimate as well as the further
incurred and to be proven work (fault search time equal to working hours) will be invoiced
to the customer if the repair cannot be carried out due to reasons for which RÖHM
GmbH is not responsible, in particular because the fault for which a complaint will be
made did not occur during the inspection, spare parts cannot be procured, the customer
culpably missed the agreed date or the contract was terminated during the execution.
6.2 The object of repair only needs to be restored to the original condition again at the
explicit request of the customer against reimbursement of the costs unless the underta-
ken work was not necessary.
6.3 In case of a repair that cannot be carried out RÖHM GmbH shall not be liable subject
to sentence 2 for damages to the object of repair, the breach of contractual secondary
obligations and for damages, which were not suffered to the object of repair itself, no
matter to which legal grounds the customer refers. RÖHM, on the other hand, will be
liable in case of wilful intent, with gross negligence of the owner / the executive bodies
or executives as well as with the culpable breach of essential contractual duties. Such
contractual obligations are deemed essential, the fulfilment of which makes the proper
execution of the contract possible at all and the compliance with which the contractual
partner may as a rule rely and depend upon.
7. Duration of the service7.1 The details with regard to the duration of repairs and services are based upon es-
timates and merely serve as information and a first estimate by the customer. They are
therefore not binding if they have not been explicitly marked as binding.
7.2 In case of subsequently placed additional and extension orders or with necessary
additional repair work the agreed repair deadline shall be extended accordingly.
8. Obligations to provide assistance of the customer8.1 The customer has to draw our attention to the statutory, official and company safety
and other regulations applicable at the place of destination of our delivery and service,
which refer to the delivery, the assembly and the operation.
8.2 The customer will inform us with or immediately after his order about possible special
features of the place of installation, which may have an implication on the proper function
of the products, in particular about the structural condition and the concrete operating
environment.
8.3 The customer shall ensure – also during the warranty period according to Subclause
17.5 – a regular and skilled maintenance of the products delivered by us insofar as this was not taken over by us as per contract.
8.4 The customer shall dispose of the goods delivered by us at his own responsibility
and at his own costs according to the respective valid regulations. We are not obliged to
create a possibility for the return unless this would have been stipulated by law.
8.5 The customer has to support the repair / maintenance personnel with the execution
of the repair at his own costs.
8.6 The customer has to take the special measures, which are necessary for the protec-
tion of persons and objects at the workplace. He also has to inform the repair managers
about existing special safety regulations insofar as these are of significance for the repair
personnel. He shall inform us in case of breaches of the repair personnel of such safety
regulations. In case of serious breaches he can refuse the infringing party access to the
repair location by mutual agreement with the repair manager.
8.7 The customer shall bear a supervisory and assistance obligation for the compliance
with the statutory working time limits. Breaches are to be reported to RÖHM GmbH.
8.8 The customer is obliged to provide the reasonable and necessary technical assi-
stance at his costs, in particular to:
a) Provision of the necessary, suitable assistants in the number that is necessary for the
repair and for the necessary time; the assistants have to follow the instructions of the
repair manager. We do not assume any liability for the assistants. If a defect or damages
were caused by the assistants owing to instructions of the repair manager, then the
regulations of Sections 17 and 18 shall apply accordingly.
b) Undertaking of all construction, bedding and scaffolding work including the procure-
ment of the necessary building materials.
c) Provision of the necessary devices and heavy tools as well as the necessary commo-
dities and required materials.
d) Provision of heating, lighting, operating power, water, including the necessary connec-
tions.
e) Provision of necessary, dry rooms, which can be locked for the storage of the tool for
the repair personnel.
f) Protection of the repair place and materials against harmful influences of all kinds,
cleaning of the repair place.
g) Provision of suitable, theft-proof recreation rooms and work rooms (with heating, ligh-
ting, washing possibility, sanitary facilities) and First Aid for the repair personnel.
h) Provision of the materials and undertaking of all other acts, which are necessary for the
adjustment of the object of repair and for carrying out a testing that is envisaged as per
contract.
8.9 The technical assistance of the orderer must guarantee that the service can be star-
ted immediately after the arrival of our personnel and carried out without delay until the
acceptance by the orderer. Insofar as special plans or instructions of RÖHM are neces-
sary, RÖHM shall make these available to the orderer in time.
9. Obligations of the customer to provide assistance in case of maintenance9.1 The products are to be used as intended and according to their protection type and
in line with the operating instructions together with their annexes.
9.2 In case of an agreement of one of the service packages described in Subclause 5,
the customer will place the products that are to be installed, maintained or repaired into
a faultless condition, capable of use before conclusion of the contract at his own costs if
the products are not already in such a condition. If the customer does not properly satisfy
this obligation either after a warning on our part and within the deadline we are entitled
to accordingly cancel the contract or the delivery. Further claims for damages on our part
shall remain unaffected.
9.3 If the customer uses the maintenance service interferences are to be reported to us
immediately in writing, in detail and in an understandable manner.
9.4 Our employees and vicarious agents are to be granted the unimpeded and safe
access to the products. In case of delays for which the customer is responsible he is
obliged to remunerate the waiting times of our employees and vicarious agents resulting
from the delay separately.
9.5 The customer shall refrain from commission third parties with the services during the
term of a service agreement, which we have to provide according to the agreement or
from performing this work himself.
9.6 The customer has to draw our attention to the statutory, official and company safety
regulations and other regulations applicable at the place of destination of our delivery and
service, which refer to the delivery, the assembly and the operation.
10. Inspection and acceptance10.1 Services will be provided by us according to the guidelines of our quality control and
deliveries inspected accordingly. If the customer requests further inspections then these
are to be agreed in writing and paid by the customer. This shall relate e.g. to special tests
for the acceptance.
General Service Terms (ASB) of RÖHM GmbH, Sontheim
10.2 The customer undertakes to accept our services under this contract immediately
after the report that they have been completed. Upon request he has to declare their
acceptance in writing towards our employees or vicarious agents insofar as there is no
essential defect. This is carried out by the signing of the service report.
10.3 Our services shall be deemed as accepted free of defects with the re-commen-
cement of the operational use of the maintained or repaired product, in particular for
production purposes, if no defects have been previously reported by the customer.
11. Cost details and cost estimate11.1 The creation of the cost estimates is liable to costs if the execution of the repair is
not approved.
11.2. The costs for a cost estimate amount to the flat rates fixed in the current price list.
11.3 If the repair cannot be carried out at these costs or if our employees or vicarious
agents consider the execution of additional work to be necessary during the repair the
customer’s consent is to be obtained if the stated costs are exceeded by more than
15%.
12. Remuneration, maturity and terms of payment12.1 Insofar as not otherwise agreed and there is no warranty case our services are to
be remunerated according to the actual work requirement pursuant to our respectively
valid general price lists. The time required by our employees will be settled in time sec-
tions of 15 min. In addition to the time required for the work that is to be performed in
these cases the customer will pay the travelling and waiting times, overtime surcharges,
expenses, travelling and accommodation costs as well as the costs of spare parts, ma-
terials subject to wear and tear and consumables and replacement part sets according
to our prices lists or in line with the offer.
12.2 Insofar as a flat rate remuneration was agreed for a service package, our work
and travelling costs and expenses are thus covered, not however the costs for waiting
times, overtime at the customer’s request, spare parts, materials subject to wear and
tear and consumables, replacement parts sets as well as other accessories. Our work
for if applicable necessary repairs is to be remunerated separately by the customer
according to Subclause 12.1.
12.3 The prices for our services can be derived from the respective price list valid upon
conclusion of the contract and are deemed ex works plus value added tax. The calcu-
lation basis for the remuneration is the one-shift operation, i.e. a use of the products up
to 160 hours in a calendar month. A surcharge to the list price of 50% is charged for
the two-shift operation, a surcharge of 100% for the three-shift operation. The above
two rates shall only apply to the service packages described under Subclause 5.. If the
customer requests assignments outside of our normal working hours (Mo - Fr, 6:30
am - 6:30 pm, a max. of 7 h per day) surcharges will be calculated according to the
respective valid price list.
12.4 If our personnel and material costs are increased then we are entitled to adjust the
contractual prices after the expiry of the first year up to a maximum of 5% above the
price of the previous year. Price changes will be announced to the customer at least
one month before the new contractual prices come into force. The customer is entitled
to terminate the contract effective as of the time at which the new price would become
valid for him for the first time.
13. Transport and insurance with the repair in the plant of RÖHM GmbH13.1 The object for repair will be delivered by the customer to us at his costs together
with the repair and service form and after execution of the repair collected by the custo-
mer again or return to him at the customer’s costs.
13.2 The customer shall bear the risk of transport.
13.3 At the customer’s request a shipment carried out by us will be insured at the
customer’s costs against the insurable transport risks, e.g. theft, breakage and fire.
13.4 No insurance cover exists during the repair time in our plant. The customer has to
ensure the maintenance of the existing insurance cover for the object of repair e.g. with
regard to fire, pipe water, storm and machine breakage insurance. Insurance cover can
only be procured for these risks at the explicit wish and costs of the customer.
13.5 In case of delay of the customer with the take-over we can charge a storage fee
for the storage in our plant. The object of repair can also be stored otherwise at our
discretion. The costs and risk of the storage during the delay shall be for the expense
of the customer.
14. Repair deadline14.1. The details concerning the repair deadlines are based on estimates and merely
serve for the purpose of information and first orientation. They are therefore not binding
unless this is explicitly agreed.
14.2. The agreement of a binding repair deadline, which must be described as binding,
can only be requested by the customer if the scope of the work has been precisely
determined.
14.3. The binding repair deadline will have been adhered to if by the time that it expires
the object of repair is ready for take-over by the customer, in the event of a contractual-
ly envisaged testing ready for its execution.
14.4. In case of subsequently placed additional and extension orders or with necessary
additional repair work the agreed repair deadline will be extended accordingly.
14.5. If the repair is delayed due to measures within the scope of industrial disputes,
in particular strike and lock-out as well as the occurrence of circumstances, which
were not caused by us, a reasonable extension to the repair deadline will occur insofar
as such impediments have as proven a substantial influence on the completion of the
repair; this shall also apply if such circumstances occur after we are in default.
15. Ban on offsetting and assignment; subcontractors15.1 The customer is only entitled to offsetting in the event of undisputed claims or
claims which have been declared final and binding. This shall not apply if the customer
asserts claims in the reciprocal relationship, in particular claims for defects.
15.2 The assignment of rights of the customer from contractual relationships with us
presumes our prior consent in order to be valid. This shall not apply insofar as Section
354 a HGB [German Commercial Code] applies.
15.3 We are entitled to use third parties in order to fulfil our contractual obligations.
16. Reservation of title16.1 The goods delivered by us shall remain our property until the payment of all of our
claims against the customer, no matter for what legal grounds, also future ones. In case
of current account the afore-mentioned property shall be deemed as security for our
balance claim.
16.2 The customer may only sell within the framework of his customary business trans-
actions and neither pledge, nor assign the goods as collateral. The customer hereby
assigns us for security of our payment claims against him, in the amount of the value of
our delivery and service, all claims with all secondary rights, which he acquires against
his buyer owing to such a sale.
16.3 As long as the property has not yet been assigned, the customer has to inform us
immediately in writing if the delivered object is attached or is exposed to other interven-
tions of third parties. Insofar as the third party is not in the position to reimburse us the
court and out-of-court costs of an action according to Section 771 ZPO [German Code
of Civil Procedure] the customer shall be liable for the loss incurred to us.
16.4. We undertake to release the securities to which we are entitled at the customer’s
request insofar as their value exceeds the claims which are to be secured by more than
20 %.”
17. Warranty17.1 Insofar as the creation of a work has been agreed and thus the law governing
contracts for work and services applies the following shall apply: If our services are
faulty then we are first of all entitled and obliged to subsequent satisfaction according
to Section 634 No. 1 BGB. If the subsequent satisfaction finally fails the customer can
according to Section 634 No. 3 cancel the contract or reduce the remuneration and
according to Section 634 No. 4 BGB request damages. Claims of the customer for
reimbursement of expenses according to Section 634 No. 2 BGB (self-execution) are
excluded. Subclause 18 shall apply to claims for damages.
17.2 Insofar as we provide planning services without executing these and thus the law
governing service contracts applies (e.g. in the event of a breach of our duties under
Subclauses 5.2.1, 5.2.2 and 5.2.3) the following applies: If our services are faulty then
we are first of all entitled and obliged to subsequent improvement. If the subsequent
improvement finally fails the customer is entitled to damages according to Subclause
18.
17.3 Excluded from the warranty are damages as a result of natural wear and tear, faul-
ty maintenance – insofar as we have not carried out this maintenance as per contract,
failure to comply with operating equipment regulations, excessive use, unsuitable ope-
rating equipment, chemical or electrolytic influences, faulty construction and assembly
work of third parties as well as other causes, for which we are not responsible.
17.4 The warranty shall lapse if the customer or third party makes changes or repairs to
our services /products without our prior written consent unless the defect is not a result
thereof.17.5 Claims of the customer owing to defects of quality and title shall become statute-
barred with the expiry of 12 months after the acceptance of the work or the knowledge
of defects with the provision of planning services.
18. Liability18.1 We shall be liable to an unlimited extent in case of wilful intent and gross neg-
ligence as well as with the injury to life, the body and the health as well as with the
culpable breach of essential contractual obligations. Deemed as essential are such
contractual obligations, the fulfilment of which makes the proper execution of the
contract possible at all and the compliance with which the contractual partner may as a
rule rely and depend on.
18.3 Incidentally our liability is excluded.
18.4 A liability according to the Product Liability Act remains unaffected.
18.5 The personal liability of our legal representatives and vicarious agents is limited as
our own liability according to the afore-mentioned provisions.
19. Term of the contract; termination19.1 Service agreements according to Subclause 5. shall come into force when signed
by both parties and shall initially apply until the end of the calendar year, that follows the
year in which the contract was concluded. The contractual relationship will subse-
quently be extended respectively by one further year unless it is terminated by one of
the parties with a period of notice of 3 months to the end of the second or a following
year. Contractual relationships can be terminated on the whole or only with regard to
individual products.
19.2 The right to the extraordinary termination for an important reason remains unaf-
fected.
20. Place of jurisdiction; applicable law20.1 With all disputes ensuing from the contractual relationship if the orderer is a mer-
chant, a legal entity under public law or a special fund under public law, the action is to
be filed at the court that has jurisdiction for our headquarters. We are also entitled to file
an action at the headquarters of the orderer.
20.2 The legal relationship is subject to the law of the Federal Republic of Germany.
German international private law and the Viennese Convention of the United Nations
concerning Contracts for the International Sale of Goods (CISG) will not apply.
RÖHM GmbH
89565 Sontheim (Germany)
Status: October 2015
General Service Terms (ASB) of RÖHM GmbH, Sontheim
RÖHM GmbHHeinrich-Röhm-Straße 50
89567 Sontheim/Brenz
Germany
Tel +49 7325 16 0
Fax +49 7325 16 510
info@roehm.biz
www.roehm.biz Id.-Nr. 1178267 / 1118 AU