Post on 01-Jan-2022
N.Saravanan, AP/Chemistry, Mahalakshmi Engineering College,Trichy-621213.
MAHALAKSHMI
ENGINEERING COLLEGE
TIRUCHIRAPALLI - 621 213
Sub. Code: CY 6151 Semester : I
Subject : ENGINEERING CHEMISTRY-I Unit –II: CHEMICAL THERMODYNAMICS
2 Marks Questions and Answers
01. Define the terms System , Surroundings and Boundary.
System: The Part of the universe.
Surroundings: Remaining part of the universe.
Boundary: Separating the system and surroundings.
02. What are the types of systems?
Isolated system, closed system, opens system.
03. What do you mean by an isolated system, closed system and open system?
Isolated system: which cannot exchange both energy and matter? Ex: universe.
Closed system: only heat exchange
Open system: only mass exchange.
04. What do you mean by a state of a system?
Exchange takes place at boundary between system and surroundings.
State: that condition in which all variables are fixed and unvarying.
05. Define the isothermal, adiabatic , isobaric, isochoric change.
Isothermal change: one at constant temperature. dT=0
Adiabatic change: No heat is exchanged into or out of a system i.e, insulated.
Isobaric change: one at constant pressure. dP=0
Isochoric change: one at constant volume. dV=0
06. State different form of definitions of second law of thermodynamics.
Work can always be converted into heat, but heat cannot be completely converted into work ,
only a fraction of heat can be converted into work and the rest remains unavailable and
unconverted.
Clausius statement: It is impossible to construct a machine, which can transfer heat from a cold
body to a hot body, unless some external work is done on the machine.
Kelvin statement: It is impossible to take heat from a hot body and convert it completely into work
by a cyclic process without transferring a part of heat to a cold body.
07. Define the statement of Entropy. Give its mathematical expression.
It is a measure of degree of disorder or randomness in a molecular system
Ex: solidliquid, entropy increases. Liquid solid, entropy decreases.
ΔS = revq
T qrev = heat change and T= Temperature.
08. What are the properties of a system?
Two properties. 1. Intensive properties 2. Extensive properties.
1. Intensive properties: Depends on only the nature of the substance present a system.
Ex:Temperature , Pressure, Concentration.
2. Extensive properties: Depends on the amount of the substance present a system.
Ex:Mass, Volume, E, S, G.
Prepared by:
N.Saravanan., AP/Chemistry.
www.Vidyarthiplus.com
www.Vidyarthiplus.com
N.Saravanan, AP/Chemistry, Mahalakshmi Engineering College,Trichy-621213.
09. Define clausius inequality.
The amount of heat transferred to the system divided by its temperature is equal to or less
than zero is known as clausius inequality. 0Q
T
δQ differential heat transfer at the system boundary during a cycle.
T absolute temperature. integration over a cycle.
10. Derive the mathematical form of Gibbs- Helmholtz equation.
P
GG H T
T
11. What are the criteria of spontaneity?
A process to occur in nature. Ex: Falls, Heat flows , Gas expands.
A spontaneous change is one-way.
ΔG = -ve , the process is spontaneous.
ΔG = 0 , the process is in equlibrium
ΔG = -ve , the process is non-spontaneous.
12. Derive the mathematical form of Clausius - clapeyron equation.
( )B A
dP q
dT T V V
13. What are the applications of Clausius - clapeyron equation?
a) Calculation of latent heat of vapourisation.
b) Calculation of boiling point.
c) Calculation of vapour pressure at another temperature.
d) Calculation of molar elevation constant.
14. Derive the mathematical form of van’t hoff isotherm.
ln lnc d
C Deq a b
A B
P PG RT K RT
P P
15. Derive the mathematical form of van’t hoff equation.
2 2 1
1 1 2
log2.303
K T TH
K R TT
16. What is the significance of Van’t hoff equation?
a) Equilibrium constant (K) and ΔH of a reaction can be calculated using Van’t hoff equation.
b) To find equilibrium constant at another temperature is known.
c) ΔH0 = 2.303R x slope
d) The equilibrium constant increases with temperature.
17. Define work function and free energy.
Work function: Helmholtz free energy (A)
The part of internal energy (E) , which is isothermally available is called
work function. A=E-TS.
Free energy: Gibbs free energy.
It is known as isothermally available energy present in a system. G=H-TS
18. Derive the mathematical form of Maxwell’s relations.
(i). s v
T P
V S
(ii).
s P
T V
P S
(iii). T V
S P
V T
(iv).
T P
S V
P T
www.Vidyarthiplus.com
www.Vidyarthiplus.com
N.Saravanan, AP/Chemistry, Mahalakshmi Engineering College,Trichy-621213.
PART – B QUESTIONS AND ANSWERS
01. Explain the terminology in thermodynamics.
System: The Part of the universe.
Surroundings: Remaining part of the universe.
Boundary: Separating the system and surroundings.
Types of systems
Isolated system, closed system, opens system.
Isolated system: which cannot exchange both energy and matter? Ex: universe.
Closed system: only heat exchange
Open system: only mass exchange.
State of a system: Exchange takes place at boundary between system and surroundings.
State: that condition in which all variables are fixed and unvarying.
Isothermal change: one at constant temperature. dT=0
Adiabatic change: No heat is exchanged into or out of a system i.e, insulated.
Isobaric change: one at constant pressure. dP=0
Isochoric change: one at constant volume. dV=0
02. Explain the entropy change for an ideal gas.
According to I law of thermodynamics dE = q-w ------------- (1)
Where, q = heat change and w = work done.
In reversible isothermal expansion, there is no change of internal energy dE = 0.
Equation (1) becomes, qrev –w = 0 ; qrev = w ---------------(2)
The work done in an expansion of n moles of a gas from volume V1 to V2 at constant
temperature T is given by
W = nRT 2
1
lnV
V-------------------- (3)
Equation (2) becomes
qrev = nRT 2
1
lnV
V ----------------(4)
but ΔS = revq
T and qrev = T ΔS
Equation (4) becomes, T ΔS = nRT 2
1
lnV
V
ΔS = 1
T nRT 2
1
lnV
V ; ΔS = nR 2
1
lnV
V
-------------------------(5)
Equation (5) is known as an entropy change in an isothermal expansion of an ideal gas.
ΔS = 2.303 nR 2
1
logV
V
www.Vidyarthiplus.com
www.Vidyarthiplus.com
N.Saravanan, AP/Chemistry, Mahalakshmi Engineering College,Trichy-621213.
03. Explain the entropy change for a reversible and irreversible process.
Entropy change for a reversible process:
a) Consider an isothermal and reversible expansion of an ideal gas.
b) If the system absorbs q amount of heat from the surroundings at temperature T, the
increase in entropy of the system is given by system
qS
T
c) The heat loose, the entropy of the surroundings decreases surroundings
qS
T
Total System surroundings
Total
S S S
q qS
T T
TotalS = 0
In a reversible isothermal process, there is no net change in entropy.
Entropy change for a irreversible process:
A system maintained at high temperature T1 and
Its surroundings maintained high temperature T2.
If q amount of heat passes irreversibly from the system to surroundings, then
Decrease in entropy of the system 1
System
qS
T
Increase in entropy of the surroundings 2
Surroundings
qS
T
Net change in entropy Total System SurroundingsS S S
1 2
2 1
1 2
1 2
1 1
q q
T T
qT T
T Tq
TT
Since T1>T2, T1-T2 is positive. Hence ΔSTotal = positive value.
In an irreversible process, the entropy of the system increases.
All the spontaneous process are irreversible and entropy of the system always
increases.
ΔSTotal>0
www.Vidyarthiplus.com
www.Vidyarthiplus.com
N.Saravanan, AP/Chemistry, Mahalakshmi Engineering College,Trichy-621213.
04. Explain the clausius inequality with proof.
The amount of heat transferred to the system divided by its temperature is equal to or less
than zero is known as clausius inequality. 0Q
T
δQ differential heat transfer at the system boundary during a cycle.
T absolute temperature. integration over a cycle.
Proof:
Consider two heat engines.
One is reversible carnot engine.
Another one is irreversibleirreversible engine.
Both engines absorb the same amount of heat QH at a temperature TH
Both engines reject the heat to a heat sink at a temperature TL
According to I law of thermodynamics,
Wrev = QH-QL rev
Wirrev.=QH-QL irrev.
since the reversible engine is more efficient than the irreversible engine.
Wrev = QH-QL rev > Wirrev.=QH-QL irrev.
For reversible heat engine – Carnot.
Here, the cyclic integral of the heat transfer divided by the temperature.
.
.
0
L revH
H H
L rev H
H H
QQQ
T T T
Q Q
T T
Q
T
For irreversible heat engine:
Same value of heat transfer from QH. but heat rejection QL is more in irreversible engine than the
reversible one.
QL irrev> QL rev
for any reversible or irreversible heat engine , we obtain the clausius inequality
0
Q
T
www.Vidyarthiplus.com
www.Vidyarthiplus.com
N.Saravanan, AP/Chemistry, Mahalakshmi Engineering College,Trichy-621213.
05. Explain Gibbs – Helmholtz equation (or) Relation between ΔG and ΔH (or) relation between
free energy and work function.
From Gibbs free energy,
G = H-TS ; H = E+PV; G = E+PV-TS
For an infinitesimal change,
dG = dE + PdV+VdP-TdS-SdT---------------------------------------(1)
But according to I & II law of thermodynamics ,
dE = TdS- PdV------------------------------------------------------------(2)
subs eqn (2) in eqn (1), we get
dG = TdS- PdV + PdV+VdP-TdS-SdT
dG = VdP- SdT--------------------------------------------------------(3)
At constant pressure dP = 0 ; eqn (3) becomes
dG = - SdT -----------------------------------------------------------------(4)
P
GS
T
---------------------------------------------------------------(5)
Subs eqn (5) in G = H-TS, we get
G = H +P
GT
T
(Or) -----------(6)
Equation (6) is Gibbs – Helmholtz equation.
For any two states of the system, the equation (4) may be written as
1 1
2 2
dG =-S dT Initialstate
dG =-S dT Finalstate
To get the change ,
2 1 2 1
2 1 2 1
dG -dG =-S dT- -S dT
d G -G =- S -S dT
d ΔG =-ΔSdT--------------------------(7)
At constant pressure the eqn.(7) becomes,
(8)
P
GS
T
According to free energy , ΔG = ΔH – TΔS
(9)G H
ST
Subs eqn (9) in eqn (8),
G H
T
=
P
G
T
G H
=T
P
G
T
Eqn(10) is another form of Gibbs – Helmholtz equation.
G- P
GT
T
= H
G
(10)= H+T
P
G
T
www.Vidyarthiplus.com
www.Vidyarthiplus.com
N.Saravanan, AP/Chemistry, Mahalakshmi Engineering College,Trichy-621213.
Significance:
(i). It relates ΔG and ΔH with temperature at constant pressure.
(ii). It gives the nature of a reaction. ΔG value = -ve, the reaction is spontaneous.
ΔG value = 0, the reaction is in equlibrium.
Applications:
1. Calculate ΔH for the cell reaction: It is calculated as follows.
ΔH = 0
0
P
EnF E T
T
2. Calculate the emf of a cell: It is calculated as follows.
00
P
H EE T
nF T
3. Calculation of entropy change: It is calculated as follows. ΔG = ΔH – TΔS
4. It is used to calculate ΔH value from free energy change of two different temperatures.
06. The free energy change accompanying a given process is -85.77 kJper mole at 250C and –
83.68 kJ at 350C. calculate the change in enthalpy for the process at 300C.
Gibbs – Helmholtz equation is G
= H+T
P
G
T
ΔG1=
-85.77 kJ
ΔG2=
-83.68 kJ ΔG = ΔG2 - ΔG1 = 2.09.
T1 = 250C = 25+273 = 298 K
T2 = 350C = 35+273 = 308 K
2.09 /10 0.209
P
G
T
0 1 2 298 30830 303
2 2
85.77 83.68
2
84.725
84.725 303 0.209
84.725 63.327
148.052
P
T TG C K
kJ
GH G T
T
X
H kJ
www.Vidyarthiplus.com
www.Vidyarthiplus.com
N.Saravanan, AP/Chemistry, Mahalakshmi Engineering College,Trichy-621213.
07. Derive the clausius – clapeyron Equation.
A system contains two phases like A and B.
Free energy changes of two phases GA & GB
The system is in equilibrium GA = GB -------------------------------(1)
eqn (1) becomes, GA + d GA = GB + d GB -----------------------(2)
We know that, G = H – TS ; H = E + PV ;
G = E + PV – TS --------------------------------------(3)
dG = dE + PdV + VdP– TdS –SdT---------------------------------(4)
But dE = dq – dw ; dq = dE + dw = dE + PdV
dq = dE + PdV--------------------------------------------------------------(5)
for reversible equation;
dqdS
T
; dq = TdS-------------------(6)
subs eqn (6) in eqn (5)
TdS = dE + PdV
dE = TdS – PdV------------------------------------------------------------(7)
subs eqn (7) in eqn (4)
dG = TdS – PdV + PdV + VdP– TdS –SdT
dG = VdP– SdT-----------------------------------------------------------(8)
dGA = VAdP– SAdT------------------------------------------------------(9)
DgB= VBdP– SBdT -----------------------------------------------------(10)
Where VA, VB are molar volumes of phase A & B
SA & SB are molar entropies.
GA = GB ; dGA = dGB
VAdP– SAdT = VBdP– SBdT
SBdT– SAdT = VBdP– VAdP
dT (SB - SA) = dP(VB-VA )
(15)S - SB A dP
=dTV -V B A
When one mole of entropy change. So ΔS= SA - SB
(16)
dP=
dTV -V B A
S
We know that entropy change ΔS = q
T
Eqn (17) is known as Clausius – clapeyron equation.
Applications of Clausius – clapeyron equation.
(1). Calculation of latent heat of vapourisation.
(2). Calculation of Boiling point.
(3). Calculation of vapour pressure at another temperature.
(4). Calculation of molar elevation constant.
dP q=
dT T(V -V )B A
(17)
dPdT V -V B AT
q
www.Vidyarthiplus.com
www.Vidyarthiplus.com
N.Saravanan, AP/Chemistry, Mahalakshmi Engineering College,Trichy-621213.
08. Derive Maxwell’s relations.
We know that , (1). dE = TdS – PdV (2). dH = TdS + VdP (3). dA = -SdT – PdV (4). dG = -SdT + VdP (1). According to internal energy ; The combined form of I and II law is , dE = TdS – PdV ---------------------------------------(1) If V is constant then dV = 0 , eqn (1) becomes
(2)V
ET
S
If S is constant then dS = 0 , eqn (1) becomes
(3)S
EP
V
Diff. eqn (2) w.r.t V at constant S
2
(4)S
E T
S V V
Diff. eqn (3) w.r.t S at constant V
2
(5)V
E P
V S S
Compare eqns. (4) & (5) Eqn (6) is one form of maxwell’s relations. (2). According to enthalpy ; dH = TdS + VdP---------------------------------------(7) If P is constant then dP = 0 , eqn (7) becomes
(8)P
HT
S
If S is constant then dS = 0 , eqn (7) becomes
(9)S
HV
P
Diff. eqn (8) w.r.t P at constant S
2
(10)S
H T
S P P
Diff. eqn (9) w.r.t S at constant P
2
(11)P
H V
S P S
Compare eqns. (10) & (11)
Eqn (12) is Second form of maxwell’s relations.
(6)S V
T P
V S
(12)S P
T V
P S
www.Vidyarthiplus.com
www.Vidyarthiplus.com
N.Saravanan, AP/Chemistry, Mahalakshmi Engineering College,Trichy-621213.
03. According to work function A; dA = -SdT – PdV---------------------------------------(13) If V is constant then dV = 0 , eqn (13) becomes
(14)V
AS
T
If T is constant then dT = 0 , eqn (13) becomes
(15)T
AP
V
Diff. eqn (14) w.r.t V at constant T
2
(16)T
A S
T V V
Diff. eqn (15) w.r.t T at constant V
2
(17)V
A P
V T T
Compare eqns. (16) & (17)
[[[[ [[
Eqn (18) is Third form of maxwell’s relations. 04. According to Gibbs free energy (G); dG = -SdT + VdP-----------------------------------------(19) If P is constant then dP = 0 , eqn (19) becomes
(20)P
GS
T
If T is constant then dT = 0 , eqn (19) becomes
(21)T
GV
P
Diff. eqn (20) w.r.t P at constant T
2
(22)T
G S
T P P
Diff. eqn (21) w.r.t T at constant P
2
(23)P
G V
P T T
Compare eqns. (22) & (23)
[[[[ [[
Eqn (24) is Fourth form of maxwell’s relations. The four types of Maxwell relations are as follows;
S V
T P
V S
S P
T V
P S
T V
S P
V T
T P
S V
P T
(18)T V
S P
V T
(24)T P
S V
P T
www.Vidyarthiplus.com
www.Vidyarthiplus.com
N.Saravanan, AP/Chemistry, Mahalakshmi Engineering College,Trichy-621213.
09. Derive van’t hoff isotherm.
It gives the quantitative relationship between the free energy change and equilibrium constant.
Consider the following reaction.
(1)aA bB cC dD
We know that G = H – TS ; H = E + PV.
G = E + PV – TS -----------------------> (2)
dG = dE + PdV+VdP-TdS-SdT--------> (3)
but according to I and II law;
dE = TdS- PdV -------------------------------(4)
subs eqn (4) in eqn (3)
dG = TdS- PdV + PdV+VdP-TdS-SdT
dG = VdP-SdT---------------------------------(5)
at constant Temperature ,dT=0;
T
dG =VdP
free energy change for 1 mole
dG = VdP
. (6)dP
dG RTP
On integrating the eqn (6);
dP
dG RTP
---------------(7)
Where G0 = integration constant.
Free energies like A,B,C,D
Pressures PA,PB,PC,PD
Free energies GA,GB,GC,GD
ΔG = GProducts – G Reactants
DC A
0 0 0 0D D B BC C A A
0 0 0 0D B D BC A C A
c d0 DC
a bBA
ΔG= G +G - G +GB -----------(8)
ΔG= G +cRTlnP +G +dRTlnP - G +aRTlnP +G +bRTlnP
ΔG= G +G - G +G +RT clnP +dlnP - alnP +blnP ---(9)
P .PΔG=ΔG +RTln --------(10)
P .P
When equilibrium ΔG =0, eqn (10) becomes
00 ln eqG RT K
0 ln (11)eqG RT K
Subs eqn (11) into eqn(10)
c dDC
a bBA
lnP .P
ΔG= +RTlnP .P
eqRT K -------(12)
The above equation is known as van’t hoff isotherm.
G = G0 +RT lnP
c d
C D
a b
A B
ln -P .P
-ΔG= RTlnP .P
eqRT K
www.Vidyarthiplus.com
www.Vidyarthiplus.com
N.Saravanan, AP/Chemistry, Mahalakshmi Engineering College,Trichy-621213.
10. Derive the van’t hoff isochore of van’t hoff equation.
This equation is obtained by combining of van’t hoff isotherm and Gibbs – Helmholtz equation.
According to van’t hoff isotherm, 0 ln pG RT K ------------(1)
Diff w.r.t T at constant P,
0
PP
0
2 PP
0
0 2 P
dlnKRlnK -RT (2)
dT
(2) ,
dlnK-RTlnK -RT (3)
dT
dlnKΔG -RT (4)
dT
P
P
P
G
T
Eqn XT
GT
T
GT
T
Gibbs – Helmholtz equation;
0
0 0 (5)G = H +T
P
G
T
Subs eqn (5) into eqn(4)
0
0
0
0
0
0
0
0
2 P
0
2 P
2 P
2 P
P2
(8)
dlnK-RT (6)
dT
dlnK-RT
dT
dlnK-RT
dT
dlnKRT
dT
dlnK
dT RT
H +T
T H
H
H
H
PP
PP
G GT
T T
G GT
T T
Integrating the above eqn T1 , T2 and 1 2
p pK ,K
22
p
1p
1
TK
P 2KT
2 1p p
2 1
ΔH dTd lnK = (9)
R T
ΔH 1 1lnK lnK
R T T
www.Vidyarthiplus.com
www.Vidyarthiplus.com
N.Saravanan, AP/Chemistry, Mahalakshmi Engineering College,Trichy-621213.
2 1
1 2
1 2
T T
T T
ΔH 1 1
R T T
ΔH
R
2 1
1 2
2 1 T T
T T
ΔHlnK lnK
R
----------------(8)
The above equation is known as van’t hoff equation.
11. The equilibrium constant for the reaction 2 2 3N +3H 2NH is 1.64x10-4 atm and 0.144x10-4
atm at 4000C and 5000C respectively. Calculate the heat of reaction in terms of calories(R=1.987cal).
T1 = 4000C = 400+273 = 673 K
T2 = 5000C = 500+273 = 773 K
K1= 1.64x10-4 atm
K2= 0.144x10-4 atm
R=1.987cal
2 1
1 2
2
1
T T
T T
K ΔHlogK 2.303R
4
4
100ΔH1.0564
2.303 1.987 673 773
ΔH 25.14 .
0.144 10 773 6731.64 10 673 773
ΔHlog2.303X1.987
X X X
k cal
XX X
2 1
1 2
2
1
T T
T T
K ΔHlogK 2.303R
www.Vidyarthiplus.com
www.Vidyarthiplus.com