Post on 02-Oct-2018
Mix
ing
IKA
®C
ATA
LOG
200
5/06
Mag
neti
c s
tirr
ers
9
IKA® MixingMagnetic stirrers with heating
RET basicsafety control IKAMAG®,
RET basic C safety control IKAMAG®
Magnetic stirrer with new heating andstirring technology for fast, accuratetemperature control. The RET basic (withstainless steel surface) and the RET basic C (with white coated surface,chemical resistant) are exemplified by:• Extremely fast heating times• Very broad temperature range
(RT - 340 °C)• Adjustable safety circuit
(50 - 380 °C) • Electronic speed control• Speed range from 0 - 1.500 rpm• Bushing according to DIN 12878 for the
use of contact thermometers (e.g. ETS-D 4 fuzzy)
• Incl. protection cover H 99
Accessories (Page):ETS-D 4 fuzzy Electronic contact thermometer (15), IKAFLON® Stirring bars(25), TRIKA® Stirring bars (25), RS 1 Set ofstirring bars (25), RSE Stirring bar remover(25), R 380 Stand support (23), Bath attachments (24): H 15, H 28, Oil bath attachments (24): H 29, H 30
Preis / € Ident. No. Ident. No.
RET basic safety control 3188800 230 V 50/60 Hz 3188801 115 V 50/60 Hz
RET basic C safety control 3197600 230 V 50/60 Hz 3197601 115 V 50/60 Hz
Magnetic stirrer
Stirring quantity (H2O)
Motor rating
input / output
Speed display
Speed range
Max. magnetic bar (L x Ø)
Heating function
Heat output
Heating rate (1 l H2O)
Temperature range
Setting accuracy
Adjustable safety circuit
Sensor for
temperature in medium
Control accuracy with sensor
Heating plate
Material RET basic: stainless steel
RET basic C: stainless steel
Dimensions
General data
Dimensions (W x D x H)
Weight
Permissible
ambient temperature
Permissible relative humidity
Protection class acc. to DIN EN 60529
20 l
12 / 5 W
Scale
0 - 1.500 rpm
80 x 10 mm
600 W
7 K / min
RT - 340 °C
± 10 K
50 - 380 °C
ETS-D 4 fuzzy
± 1 K
white coated
Ø = 135 mm
160 x 280 x 97 mm
2,4 kg
5 - 40 °C
80 %
IP 42
RET basic safety control
RET basic C safety control
Preis / € Ident. No. Ident. No.
493,00…LB 3378500 230 V 50/60 Hz 3378501 115 V 50/60 Hz
Magnetic stirrer
Stirring quantity (H2O)
Motor rating
input / output
Speed display
Speed range
Max. magnetic bar L x Ø
Heating function
Heat output
Heating rate (1 l H2O in H 15)
Temperature range
Setting accuracy
Adjustable safety circuit
Sensor for
temperature in medium
Control accuracy with sensor
Heating plate
Material
Dimensions
General data
Dimensions (W x D x H)
Weight
Permissible ambient
temperature
Permissible relative humidity
Protection class acc. to DIN EN 60529
20 l
12 / 5 W
scale (1 - 10)
0 - 1.100 rpm
80 x 10 mm
600 W
6 K / min
RT - 300 °C
± 10 K
50 - 380 °C
ETS-D 4 fuzzy
± 1 K
silumin
Ø = 135 mm
160 x 280 x 90 mm
2,4 kg
5 - 40 °C
80 %
IP 42
RCT basic safety control IKAMAG®
• With adjustable safety circuit for heatingplate temperature (50 - 380 °C)
• Safety magnetic stirrer with heating,suitable for unsupervised operation
• World-wide best seller • Bushing according to DIN 12878 for
connecting a contact thermometer, e.g. ETS-D 4 fuzzy
• Top class safety with improved heatingcontrol technology
• Enclosed assembly (IP 42) guaranteeslong service life
• Highly polished Silumin heating plate for optimum heat transfer
• High magnetic adhesion preventsdecoupling
• Incl. protection cover H 99
Accessories (Page):ETS-D 4 fuzzy Electronic contact thermo-meter (21), IKAFLON® Stirring bars (25),TRIKA® Stirring bars (25), RS 1 Set ofstirring bars (25), RSE Stirring bar remover(25), R 380 Stand support (23), Bathattachments (24): H 15, H 28, Oil bathattachments (24): H 29, H 30
Mix
ing
IKA
®C
ATA
LOG
200
5/06
Mag
neti
c s
tirr
ers
11
IKA® MixingMagnetic stirrers with heating
RET control-visc safety control and
RET control-visc C safety control
Safety magnetic stirrer with heating,suitable for unsupervised operation.
• Option: 1 sensor for medium tempera-ture (PT 100) or 2 separate temperaturesensors for heat transfer fluid andmedium (PT 1000) available (automaticidentification)
• 2 adjustable safety circuits• Stirring bar crack detection• With stainless steel surface or white
coated surface (chemical resistant)• Setting acc. medium temperature: 0,5 K• HOT warning display indicating presence
of any residual heat when the unit isswitched off
• Easy-to-read backlit LCD display• Actual medium temperature resolution
displayed: 0,1 K (RT to 100 °C); 1 K (from100 °C upwards)
• Fuzzy control and microprocessortechnology guarantee maximum controlaccuracy
• PC control via RS 232 interface, withoptional safety function
• Software labworldsoft® is available tocontrol and document all measuringvalues via PC
• HOT visual warning for hot heating plate• 3 modes of operation, e.g. stirring and
heating functions can be secured againstinadvertent changes of set parameters
• Viscosity trend display• Enclosed assembly (IP 42) guarantees
long service life• Incl. protection cover H 99
20 l
12 / 5 W
digital
0 - 1.500 rpm
80 x 10 mm
600 W
7 K / min
RT - 340 °C
0,5 K (to 100 °C)
1 K (from 100 °C)
50 - 350 °C
50 - 350 °C
1 x PT 100 or
2 x PT 1000
± 0,2 K
white coated
Ø = 135 mm
160 x 280 x 97 mm
2,8 kg
5 - 40 °C
80 %
IP 42
RS 232 / analog
Accessories (Page): Temperature sensors (22/23): PT 100.50, PT 100.51, PT 100.52, PT 1000.50, PT 1000.51, IKAFLON® -Stirring bars (25), TRIKA® -Stirring bars (25), RS 1 Set of stirring bars (25), RSE Stirring bar remover (25),R 380 Stand support (23), Bath attachments (24): H 15, H 28, labworldsoft® (131), Oil bath attachments(24): H 29, H 30, AM 1 Analog module (112)
Preis / € Ident. No. Ident. No.
RET control-visc safety control 3364000 230 V 50/60 Hz 3364001 115 V 50/60 Hz
RET control-visc C safety control 3364100 230 V 50/60 Hz 3364101 115 V 50/60 Hz
RET control-visc safety control
RET control-visc C safety control
Magnetic stirrer
Stirring quantity (H2O)
Motor rating
input / output
Speed display
Speed range
Max. magnetic bar (L x Ø)
Heating function
Heat output
Heating rate (1 l H2O in H 15)
Temperature range
Medium temperature setting resolution
Adjustable safety circuit (heating plate)
Adjustable safety circuit (medium)
Sensor for temperature in medium
Control accuracy with sensor
Heating plate
Material RET control-visc s.c. stainless steel
RET control-visc C s.c. stainless steel
Dimensions
General data
Dimensions (W x D x H)
Weight
Permissible
ambient temperature
Permissible relative humidity
Protection class acc. to DIN EN 60529
Interface
Mix
ing
IKA
®C
ATA
LOG
200
5/06
Mag
neti
c s
tirr
ers
12
IKA® MixingMagnetic stirrers with heating
RH basic 2
Economic magnetic stirrer with stainlesssteel heating plate.
• Fixed safety circuit 400 °C• Soft-start stirring motor
Accessories (Page):IKAFLON®-Stirring bars (25), TRIKA®-Stirring bars (25), RSE Stirring bar remover(25), Bath attachments (24): H 15, H 28
Preis / € Ident. No. Ident. No.
314,00…LB RH basic 2 3339000 230 V 50/60 Hz 3339001 115 V 50/60 Hz
10 l
15 / 2 W
scale (0 - 6)
100 - 2.000 rpm
40 x 8 mm
400 W
3 K / min
RT - 320 °C
stainless steel (AISI 304)
Ø = 125 mm
168 x 220 x 105 mm
2,4 kg
5 - 40 °C
80 %
IP 21
Magnetic stirrer
Stirring quantity (H2O)
Motor rating
input / output
Speed display
Speed range
Max. magnetic bar (L x Ø)
Heating function
Heat output
Heating rate (1 l H2O in H 15)
Temperature range
Heating plate
Material
Dimensions
General data
Dimensions (W x D x H)
Weight
Permissible
ambient temperature
Permissible relative humidity
Protection class acc. to DIN EN 60529
RH basic KT/C safety control and
RH digital KT/C safety control
New, universal magnetic stirrers withheating and bushing according to DIN 12878 for connecting an electronictemperature controller, e.g. ETC 1. RH digital KT/C safety control
complete with digital display for set andactual temperature and actual speed.
• Heating plate with excellent chemicalresistance
• Heat output 500 W• Long life cycle due to foil heating and
solid-state switching for heat control • Adjustable safety circuit for heating
plate temperature• Soft-start stirring motor• Safety feature: in the event of motor
failure the heating switches off automatically
Accessories (Page):ETC 1 Electronic temperature controller(22), IKAFLON®-Stirring bars (25), TRIKA®-Stirring bars (25), RSE Stirring bar remover(25), Bath attachments (24): H 15, H 28
15 l
15 / 2 W
scale (0 - 6) / digital
100 - 2.000 rpm
40 x 8 mm
500 W
4,5 K / min
RT - 320 °C
100 - 400 °C
ETC 1
± 3 K
white coated
130 x 130 mm
168 x 220 x 105 mm
2,4 kg
5 - 40 °C
80 %
IP 21
Magnetic stirrer
Stirring quantity (H2O)
Motor rating
input / output
Speed display
Speed range
Max. magnetic bar (L x Ø)
Heating function
Heat output
Heating rate (1 l H2O in H 15)
Temperature range
Adjustable safety circuit
Sensor for
temperature in medium
Control accuracy with sensor
Heating plate
Heating plate, stainless steel
Dimensions
General data
Dimensions (W x D x H)
Weight
Permissible
ambient temperature
Permissible relative humidity
Protection class acc. to DIN EN 60529
Preis / € Ident. No. Ident. No.
RH basic KT/C safety control 3207100 230 V 50/60 Hz 3207101 115 V 50/60 Hz
RH digital KT/C safety control 3207000 230 V 50/60 Hz 3207001 115 V 50/60 Hz
RH basic KT/C safety control
RH basic 2
RH digital KT/C safety control
Mix
ing
IKA
®C
ATA
LOG
200
5/06
Mag
neti
c s
tirr
ers
15
IKA® MixingMagnetic stirrers without heating
Mini MR standard IKAMAG®
Magnetic stirrer without heating, forstirring quantities up to 800 ml (H2O).
• Infinitely variable speed from 0 - 1.500 rpm
• White set-up plate suitable for observing color reactions
Accessories (Page):IKAFLON® Stirring bars (25), TRIKA® Stirring bars (25), RSE Stirring bar remover (25)
Preis / € Ident. No.
142,00…LB 2677000 100 - 240 V 50/60 Hz
Magnetic stirrer
Stirring quantity (H2O)
Motor rating
input / output
Display
Speed range
Max. magnetic bar (L x Ø)
Set-up plate
Material
Dimensions
General data
Dimensions (W x D x H)
Weight
Permissible
ambient temperature
Permissible relative humidity
Protection class acc. to DIN EN 60529
0,8 l
4 / 0,5 W
none
0 - 1.500 rpm
30 x 8 mm
polyester
115 x 115 mm
115 x 130 x 40 mm
0,23 kg
5 - 40 °C
80 %
IP 42
KMO 2 basic IKAMAG®
Small, powerful magnetic stirrer withoutheating.
• Strong magnetic field• Motor with optoelectronic speed control • Infinitely variable speed from
0 - 1.100 rpm• Stainless steel casing facilitates cleaning
and sterilization• Includes M 10 thread for H 16 V
support rod
Accessories (Page):IKAFLON® Stirring bars (25), TRIKA® Stirring bars (25), RS 1 Set of stirring bars (25),RSE Stirring bar remover (25),H 16 V Support rod (23)
Preis / € Ident. No. Ident. No.
308,00…LB 2812000 230 V 50/60 Hz 2812001 115 V 50/60 Hz
Magnetic stirrer
Stirring quantity (H2O)
Motor rating
input / output
Display
Speed range
Max. magnetic bar (L x Ø)
Set-up plate
Material
Dimensions
General Data
Dimensions (W x D x H)
Weight
Permissible
ambient temperature
Permissible relative humidity
Protection class acc. to DIN EN 60529
5 l
14 / 4 W
scale
0 - 1.100 rpm
50 x 8 mm
stainl. steel (AISI 304)
140 x 120 mm
140 x 200 x 75 mm
1,4 kg
5 - 40 °C
80 %
IP 21
Mix
ing
IKA
®C
ATA
LOG
200
5/06
Mag
neti
c s
tirr
ers
16
IKA® MixingMagnetic stirrers without heating
COLOR SQUID IKAMAG®
Small magnetic stirrers without heating, ina variety of motifs.
• Recyclable materials • Very good chemical resistance due to
glass top and synthetic bottom made ofHytrel®
• Electronically controlled motor withinfinitely variable speed from 0 - 1.500 rpm
Accessories (Page):IKAFLON® Stirring bars (25), TRIKA® Stirring bars (25), RSE Stirring bar remover (25)
Magnetic stirrer
Stirring quantity (H2O)
Motor rating
input / output
Display
Speed range
Max. magnetic bar (L x Ø)
Set-up plate
Material
Dimensions
General data
Dimensions (W x D x H)
Weight
Permissible
ambient temperature
Permissible relative humidity
Protection class acc. to DIN EN 60529
0,8 l
2 / 1 W
none
0 - 1.500 rpm
30 x 8 mm
glass
Ø = 110 mm
130 x 135 x 50 mm
0,48 kg
5 - 40 °C
80 %
IP 54
Preis /€ Ident. No. Motif Ident. No. Motif
107,00…LB 100 - 240 V 50/ 60 Hz 2669923 Goldfish 2669917 Number one2669925 Lab-Chief 2669922 Wildcat2669935 Harry 2669913 Zip2669936 Mighty Mouse 2669926 Squidy2669910 Harry’s notes
Goldfish
Lab-Chief
Harry
Mighty Mouse
Number one
Wildcat
Zip
SquidyHarry´s notes
Mix
ing
IKA
®C
ATA
LOG
200
5/06
Mag
neti
c s
tirr
ers
17
IKA® MixingMagnetic stirrers without heating
BIG SQUID IKAMAG®
Magnetic stirrer in five motifs. Samefeatures as COLOR SQUID, but with alarger set-up plate:
• Diameter: 160 mm• Stirring quantity (H2O) up to 1,5 l
Accessories (Page):IKAFLON® Stirring bars (25), TRIKA® Stirring bars (25), RSE Stirring bar remover (25)
Magnetic stirrier
Stirring quantity (H2O)
Motor rating
input / output
Display
Speed range
Max. magnetic bar (L x Ø)
Set-up plate
Material
Dimensions
General Data
Dimensions (W x D x H)
Weight
Permissible
ambient temperature
Permissible relative humidity
Protection class acc. to DIN EN 60529
1,5 l
2 / 1 W
none
0 - 1.500 rpm
30 x 8 mm
glass
Ø = 160 mm
180 x 180 x 48 mm
1 kg
5 - 40 °C
80 %
IP 54
Preis /€ Ident. No. Motif Ident. No. Motif
119,00…LB 100 - 240 V 50/60 Hz 3050009 White 3050005 IKAmäleon3050002 Froggy 3050004 Ocean3050001 Star
White
Froggy
Star
Ocean
IKAmäleon
Mix
ing
IKA
®C
ATA
LOG
200
5/06
Mag
neti
c s
tirr
ers
18
IKA® MixingMagnetic stirrers without heating
lab disc
Ultra-flat compact magnetic stirrer,guaranteed with modern magnet coiltechnology. Wear-free drive with nomoving parts. The lab disc can reversedirection of rotation automatically every30 seconds to ensure better mixing.
• Explosion hazard zone 2 (see techn. data)• Rotation direction is reversible• High IP protection class (IP 65)• Wear-free• Set-up plate and casing made from
chemically resistant materials• Slip-proof, safe stand
Accessories (Page):IKAFLON®-Stirring bars (25), TRIKA®-Stirring bars (25), RSE Stirring bar remover (25)
800 ml
5 / 3 W
15 - 1.500 rpm
every 30 s
30 x 8 mm
polyester
Ø = 90 mm
114 x 161 x 12 mm
0,3 kg
5 - 40 °C
80 %
IP 65
II 3 G EEx nC IIB T6
Magnetic stirrer
Stirring quantity (H2O)
Rating
input / output
Speed range
Reversion of rotation direction (switchable)
Max. magnetic bar (L x Ø)
Surface plate
Material
Dimensions
General data
Dimensions (W x D x H)
Weight
Permissible
ambient temperature
Permissible relative humidity
Protection class acc. to DIN EN 60529
Ex-proof
lab disc - the ultra-flat magnetic stirrer
with 13 great motifs
Preis /€ Ident. No. Motif Ident. No. Motif
114,00…LB 100 - 240 V 50/60 Hz 3277700 [WHITE] 3362000 [AIR-MAIL]3362200 [STONE WASHED] 3362100 [MAIL-BOX]3362300 [SUNNY SIDE UP]
[STONE WASHED]
[SUNNY SIDE UP]
[WHITE]
[AIR-MAIL]
[MAIL-BOX]
REO basic C IKAMAG®
Classic magnetic stirrer without heatingnew designed. Outstanding chemicalresistance due to the white coatedheating plate.
• Non-locking, electronically controlled motor
• Constant speed even during changes in load
• Infinitely variable speed
Accessories (Page):IKAFLON® Stirring bars (25), TRIKA® Stirring bars (25), RS 1 Set of stirring bars (25),RSE Stirring bar remover (25),H 16 V Support rod (23), R 380 Stand support (23)
Magnetic stirrer
Stirring quantity (H2O)
Motor rating
input / output
Speed display
Speed range
Max. magnetic bar (L x Ø)
Set-up plate
Material (stainl. steel)
Dimensions
General data
Dimensions (W x D x H)
Weight
Permissible
ambient temperature
Permissible relative humidity
Protection class acc. to DIN EN 60529
20 l
12 / 5 W
scale
0 - 1.500 rpm
80 x 10 mm
white coated
Ø = 135 mm
160 x 280 x 97 mm
2,4 kg
5 - 40 °C
80%
IP 42
Mix
ing
IKA
®C
ATA
LOG
200
5/06
Mag
neti
c s
tirr
ers
20
IKA® MixingMagnetic stirrers without heating
Midi MR 1 digital IKAMAG®
Powerful magnetic stirrer without heating.
• Flat, sturdy stainless steel casing • Non-locking motor• Infinitely variable speed • Digital LED speed display• Timer (0 - 56 min) or continuous
operation• For stirring quantities up to 50 liters
(H2O)
Accessories (Page):IKAFLON® Stirring bars (25), TRIKA® Stirring bars (25),RSE Stirring bar remover (25)
Preis / € Ident. No. Ident. No.
1.625,00…LB 2621900 230 V 50/60 Hz 2621901 115 V 50/60 Hz
50 l
70 / 19 W
digital
0 - 1.000 rpm
80 x 10 mm
stainl. steel (AISI 304)
350 x 350 mm
360 x 430 x 110 mm
9 kg
5 - 40 °C
80 %
IP 21
Magnetic stirrer
Stirring quantity (H2O)
Motor rating
input / output
Speed display
Speed range
Max. magnetic bar (L x Ø)
Set-up plate
Material
Dimensions
General data
Dimensions (W x D x H)
Weight
Permissible
ambient temperature
Permissible relative humidity
Protection class acc. to DIN EN 60529
Preis / € Ident. No. Ident. No.
434,00…LB 3261100 230 V 50/60 Hz 3261101 115 V 50/60 Hz
Maxi MR 1 digital IKAMAG®
Same features as Midi MR 1 digital.
• For stirring quantities up to 150 l (H2O)
Accessories (Page):IKAFLON® Stirring bars (25), TRIKA® Stirring bars (25),RSE Stirring bar remover (25)
Preis / € Ident. No. Ident. No.
1.965,00…LB 2621800 230 V 50/60 Hz 2621801 115 V 50/60 Hz
Magnetic stirrer
Stirring quantity (H2O)
Motor rating
input / output
Speed display
Speed range
Max. magnetic bar (L x Ø)
Set-up plate
Material
Dimensions
General data
Dimensions (W x D x H)
Weight
Permissible
ambient temperature
Permissible relative humidity
Protection class acc. to DIN EN 60529
150 l
80 / 35 W
digital
0 - 600 rpm
155 x 27 mm
stainl. steel (AISI 304)
500 x 500 mm
505 x 585 x 110 mm
16 kg
5 - 40 °C
80 %
IP 21
Mix
ing
IKA
®C
ATA
LOG
200
5/06
Mag
neti
c s
tirr
ers
21
IKA® MixingMagnetic stirrers accessories
ETS-D 4 fuzzy IKATRON®
Electronic contact thermometer with fuzzylogic control and RESET function, incl.sensor H 62. For IKAMAG® magneticstirrers and IKATHERM® heating plateswith contact thermometer bushing accor-ding to DIN 12878. Ensures perfecttemperature control without overshootingthe set temperature, even in the case ofquick heating.
Patented: 3 modes of operation guaranteeoptimum adjustment to your workingmethod.Operating mode A:
Suitable for work with varying parameters(from -10 °C to 400 °C). Safety temperature adjustable.Operating mode B:
Suitable for series operation under uniformconditions.Operating mode C:
Suitable for unsupervised operation. Allvalues are taken from the memory. Thisensures perfect protection against inadver-tent or improper adjustment.
Preis / € Ident. No.
226,00…LB 2666600
All IKAMAG® magnetic stirrers and IKATHERM® heating plates
beginning with manufacturer’’s No. 466284 or with a “0” before
the manufacturer’s No. can be connected directly via the contact
thermometer bushing acc. to DIN 12878. This applies for all IKA®
devices manufactured since 1990.
Accessories (Page):
Sensors (21): H 62, H 66, H 70 Extension cable (21),
H 52 Power pack set (22), H 16 V Support rod (23),
H 44 Boss head clamp (23), H 36 Holding rod (23)
Sensor
Measuring / control range
Temperature display
Resolution
Setting accuracy
Control deviation
Analog output with H 52
Dimensions (W x D x H)
Weight
Permissible
ambient temperature
Permissible humidity
Protection class acc. to DIN EN 60529
H 62 Stainless steel sensor
Spare sensor for use with ETS-D 4 fuzzy.
Preis / € Ident. No.
74,50…LB 2735400
Depth of immersion
Diameter
Length
230 mm
3 mm
260 mm
H 66 Stainless steel sensor,
glass-coated
For use with ETS-D 4 fuzzy, for work withaggressive media such as acid andalkaline solutions.
Preis / € Ident. No.
154,00…LB 2735500
Depth of immersion
Diameter
Length
230 mm
6 mm
260 mm
PT 1000
-10 - 400 °C
digital
0.1 K (< 100 °C)
1 K (> 100 °C)
1 K
± 1 K
100 °C = 1V
67 x 62 x 145 mm
0,2 kg
0 - 60 °C
80 %
IP 44
H 70 Extension cable
To separate the casing from the sensor.The casing with the electronics may thusbe kept away from dangerous vaporreleased by the medium (for use withETS-D 4 fuzzy).
Preis / € Ident. No.
72,50…LB 2735600
Length 1 m
Mix
ing
IKA
®C
ATA
LOG
200
5/06
Mag
neti
c s
tirr
ers
22
IKA® MixingMagnetic stirrers accessories
PT 100.50 Temperature sensor
For use with RET control-visc safety controland RET control-visc C safety control, made of stainless steel.
Preis / € Ident. No.
126,00…LB 2601900
Depth of immersion
Diameter
Accessories (Page):
H 16 V Support rod (23),
H 44 Boss head clamp (23), H 36 Holding rod (23)
230 mm
3 mm
PT 100.51 Temperature sensor
For use with RET control-visc safetycontrol and RET control-visc C safetycontrol, glass-coated for work with aggres-sive media such as acid and alkalinesolutions. Preis / € Ident. No.
139,00…LB 2600300
Depth of immersion
Diameter
Accessories (Page):
H 16 V Support rod (23),
H 44 Boss head clamp (23), H 36 Holding rod (23)
230 mm
8 mm
H 52 Power pack set
The power pack set is required in order tooperate older magnetic stirrer models(prior to 1990) with ETS-D 4 fuzzy. If youhave any questions, please contact ourservice department.In addition, the power pack set features ananalog output to document signals on arecorder.
Analog output
Accessories (Page):
labworldsoft® (131), DC 2 DATACONTROL (135),
AK 2.1 Analog cable (136)
PC documentation is also possible in combination with
DC 2 DATACONTROL and labworldsoft®.
10 mV/K
Preis / € Ident. No. Ident. No.
92,00…LB 8010600 230 V 50/60 Hz 8010601 115 V 50/60 Hz
ETC 1 IKATRON®
Special temperature controller for usewith magnetic stirrers RH basic KT/Csafety control and RH digital KT/C safetycontrol, incl. H 62.51 Stainless steelsensor.
Accessories (Page):H 62 ETC 1 Stainless steel sensor (22), H 16 V Support rod (23), H 44 Boss headclamp (23), H 36 Holding rod (23)
Preis / € Ident. No.
146,00…LB 3279000
Sensor
Measuring / control range
Temperature display
Resolution
Setting accuracy
Control deviation
Dimensions (W x D x H)
Weight
Permissible
ambient temperature
Permissible relative humidity
Protection class acc. to DIN EN 60529
PT 1000
0 - 350 °C
digital
0.1 K (< 100 °C)
1 K (> 100 °C)
1 K
± 3 K
67 x 62 x 145 mm
0,2 kg
0 - 60 °C
80 %
IP 44
H 62.51 Stainless steel sensor
Spare sensor for use with ETC 1.
Preis / € Ident. No.
74,50…LB 2735451
Depth of immersion
Diameter
Length
230 mm
3 mm
260 mm
Preis / € Ident. No.
39,00…LB 2636700
Mix
ing
IKA
®C
ATA
LOG
200
5/06
Mag
neti
c s
tirr
ers
23
IKA® MixingMagnetic stirrers accessories
H 16 V Support rod
Stainless steel support rod for all magnetic stirrers with M 10 threadedbushing.
Preis / € Ident. No.
39,00…LB 1545100
Diameter
Length
Thread
Material
10 mm
450 mm
M 10
stainl. steel (AISI 304)
H 44 Boss head clamp
For fastening the holding rod H 36 to thesupport rod H 16 V.
Preis / € Ident. No.
16,80…LB 2437700
Preis / € Ident. No.
16,80…LB 2288000
Preis / € Ident. No.
118,00…LB 2847700
Depth of immersion
Diameter
60 mm
3 mm
Preis / € Ident. No.
118,00…LB 3367600
Depth of immersion
Diameter
230 mm
3 mm
Preis / € Ident. No.
183,00…LB 3377700
Depth of immersion
Diameter
230 mm
3 mm
PT 1000.51 Temperature sensor
As per PT 1000.50, but glass-coated forwork with corrosive media such as acidsand lyes.
Accessories (Page): H 44 Boss head clamp (23), H 36 Holdingrod (23), R 380 Stand support (23)
H 36 Holding rod
For fastening ETS-D 4 fuzzy or ETC 1 withH 44 to the support rod H 16 V.
PT 100.52 Temperature sensor
Made of stainless steel, for use with RETcontrol-visc safety control and RETcontrol-visc C safety control.Accessories (Page): H 16 V Support rod (23), H 44 Boss headclamp (23), H 36 Holding rod (23)
PPT 1000.50 Temperature sensor
2 separate steel sensors for heat transferfluid and medium. Ideal for the magneticstirrers RET control-visc safety control andRET control-visc C safety control. Accessories (Page): H 16 V Support rod (23), H 44 Boss headclamp (23), H 36 Holding rod (23)
R 380 Stand support
For fitting along the multifunction strips of the magnetic stirrers RCT basicsafety control, RET basic safety control, RET basic C safety control, RETcontrol-visc safety control, RET control-visc C safety control and REO basic C.It allows the support rod H 16 V to be fixed at any given position. This makes itpossible to use several support rods.
Accessories (Page):H 16 V Support rod (23)
Mix
ing
IKA
®C
ATA
LOG
200
5/06
Mag
neti
c s
tirr
ers
24
H 15 Bath attachment
Stainless steel bath attachment, suitablefor tempering 0,5 and 1 l flasks.
Preis / € Ident. No.
71,50…LB 0551300
Inner diameter
Height
Volume
140 mm
125 mm
1,5 l
H 28 Bath attachment
Stainless steel bath attachment, suitableas a sand bath basin.
Preis / € Ident. No.
71,50…LB 2167400
Inner diameter
Height
Volume
Max. temperature
140 mm
70 mm
1 l
350 °C
Oil bath attachments
H 29
H 30
The oil bath attachments H 29 and H 30can be used as oil baths together with anIKAMAG® magnetic stirrer with heating orwith an IKATHERM® heating plate having adiameter of 135 mm.
• Positioning border prevents sliding on theheating plate
• Safety grips protect you from burns caused by hot oil
• The bath attachment is made of aluminum. This ensures good heattransfer and quick heating-up of thetempering medium
• Easy cleaning• The bath attachments can only be used
as an oil bath
Preis / € Ident. No.
91,50…LB 2829400 H 2997,00…LB 2829500 H 30
Inner diameter
Height
Volume
Inner diameter
Height
Volume
H 12 / 135 Supporting plate
For increasing the heating plate to adiameter of 200 mm.
Preis / € Ident. No.
94,50…LB 0771700
For heating plate diameter
Material
Diameter enlarged to
135 mm
aIuminum
200 mm
IKA® MixingMagnetic stirrers accessories
136 - 180 mm
81 mm
1 l
136 - 190 mm
110 mm
1,5 l
H 99 Protective cover
For the magnetic stirrers RCT basic safetycontrol, RET basic safety control, RET basicC safety control, RET control-visc safetycontrol, RET control-visc C safety control(included in delivery). • Resistant to most acids, alkaline solutions
and organic solvents Ident. No.
11,60…LB 2734500
Material
Max. temperature
silicone
135 °C
TRIKA® Magnetic stirring bars
Triangular, PTFE-coated, especially suited forstirring liquids which have a low solidscontent and where sedimentation is notdesired.
TRIKA® 25*
TRIKA® 42*
25 mm
42 mm
Preis / € Ident. No. Description
Länge
6,70…LB0356600
0356500
IKAFLON® Magnetic stirring bars
Round, PTFE-coated.
IKAFLON® 10*
IKAFLON® 15*
IKAFLON® 20*
IKAFLON® 25*
IKAFLON® 30*
IKAFLON® 40*
IKAFLON® 50*
IKAFLON® 80*
IKAFLON® 110
IKAFLON® 155
10 mm 6 mm
15 mm 6 mm
20 mm 8 mm
25 mm 8 mm
30 mm 8 mm
40 mm 8 mm
50 mm 8 mm
80 mm 10 mm
110 mm 27 mm
155 mm 27 mm
Preis / € Ident. No. Description Length Ø
2,90…LB2,90…LB3,10…LB3,20…LB3,80…LB4,00…LB4,80…LB
11,10…LB122,00…LB166,00…LB
1572000
1572100
1572200
1572300
1572400
1572500
1572600
1572800
0793300
1129000
Mix
ing
IKA
®C
ATA
LOG
200
5/06
Mag
neti
c s
tirr
ers
25
RS 1 Set of magnetic stirring bars
Consisting of the IKAFLON® and TRIKA® Magneticstirring bars marked with *, see above.
Preis / € Ident. No.
51,50…LB 1358600
RSE Stirring bar remover
For all stirring bars up to 80 mm in length,PTFE-coated.
Preis / € Ident. No.
27,50…LB 1293100
H 11 Mains cable
Spare
Preis / € Ident. No. Ident. No.
12,60…LB 1091500 (EURO plug) 1091700 (USA plug)
12,60…LB 2410700 (UK plug) 1091600 (CH plug)
IKA® MixingMagnetic stirrers accessories