Magic-Pak HVAC System

Chuck PerryN ti l S l M C i l P d tNational Sales Manager Commercial Products

What is a Magic-Pak?Ducted Vertical Package HVAC Unit

u Completely Self Contained HVAC System– Heating & Cooling In One Package– No External Condensing Unit

Pre Wired– Pre-Wired– Pre-Charged– No External Flue or Combustion Air

u No outside Condensing unit, refrigerant lines, separate cooling coil

u In Production Since 1965

u Over 1 Million Units Installed Throughout North Americag

MGE - Gas / Electricu Gas Heating

– 36, 48 & 60 MBtuh– 80% AFUE– 80% AFUE

u Electric Cooling– 1, 1.5, 2 & 2.5 Tons1, 1.5, 2 & 2.5 Tons– 10.6 & 12 SEER

• “Space-Constrained” Unit

u Optional Stainless Steel Heat Exchangeru Optional Condenser Air Pre-Filteru Optional LPG Conversion Kit

MGE - Safe Operation

u Direct Vent Appliance per ANSI Z21.47– Flue Clearance Requirements:Flue Clearance Requirements:

• 36 & 48 MBtuh - 9” Clearance• 60 MBtuh - 12” Clearance

u All Combustion Air from Outside

u Integral Vent

u Combustion Air Blower Cycles For 10 Seconds On Call For Cooling

Disrupts Insect Activity In Flue– Disrupts Insect Activity In Flue

Blower Section

Evaporator Section

Combustion Section

Condenser Section

Supply Air OpeningOpeningReturn Air

Opening

Gas Connection

Drain C tiConnection

Environmental/Regulatory

u All products will be R410a compatible by mid 2009u All products will be R410a compatible by mid 2009

u Certified efficiency & capacity performance through ARI

u Safety performance certified through ANSI & ETL

u All units run tested at the factory and test data stored in system

Easy Installationu Completely Self-Contained

– Pre-Wired & Pre-Charged– No External Condensing Unit– No External Condensing Unit– No External Chimney– No External Combustion Air Duct

u Installation Requirements– Must Be Installed On An Outside Wall– Minimum 4” Base– Wall Sleeve

• 2”, 6”, 8”, 10”, 12” & 16” Wall Thickness– Louver

P l l• Polypropylene• Extruded Aluminum

– Magic-Pak Unit

Utility Connections

u One Line Voltage Connection

u One Low Voltage Connection

u One Gas Connection

u Condensate Drain & Trap

Supply DuctRun internal to soffit/return duct

SoffitUsed as returnUsed as return duct system

NOTE: Duct sizing is

ReturnAir

SupplyAir

R Ai Duct sizing isfield and application

dependent

Return AirSupply Air

Closet or Utility Room WallGas Line Inlet to Unit

Closet or Utility Room WallCondensate Drain Connection

Unit Platform (Field Supplied)Minimum 4" height from floor

Magic-MagicPak

Easy Service & Installation

u All Service From Inside

u Chassis Remains In Place During Service

u Large Access Panelsu Large Access Panels

u No Burner Adjustments (MGE)

Louver Optionsu Engineered Material

– “No Break” Polypropylene– Standard Colors– Standard Colors

• White, Sandstone, Taupestone, Beige

u Extruded Aluminum Architectural– Custom Colors & Sizes– High Performance “Kynar” Finish

Cl A di d– Clear Anodized

Primary Applications

Apartments

C d i iCondominiums

Primary Applications

Student Housing

Senior’s Housing &

Assisted Living Facilities

Targeted Customer ProfileKey Customers

u Design Teams– Developer– Developer– Architect– Engineer– ConstructorConstructor

u Utilities & ESCO’s

u Building Residents

Nationwide, customer-focused representation.

Magic-Pak AdvantagesDevelopers

u Low Installed Cost

u Minimal Maintenance

u Eliminates Entire Building Shutdownu Eliminates Entire Building Shutdown

u Individual Metering

u Short down time and easy replacement

Magic-Pak Advantages Architects

u Creative Solution to Design Problemsu Architectural Control vs Architectural Chaosu Architectural Control vs. Architectural Chaos

Magic-Pak AdvantagesMechanical Engineers

u Reduction of Liabilityu Easily Appliedu Easily Applied

Magic-Pak AdvantagesConstructors

u Quick & Easy Installationu Easy Coordination Between The Tradesu Easy Coordination Between The Tradesu Fewer Call-Backs

Magic-Pak Advantages Building Residents

u Personal Comfort Control Year Round

u Indoor Air Quality Options– Premium Filters– UV LightsUV Lights– Humidifiers

u Low Utility Costs

u Operational Flexibility

Competitive AdvantageProduct Heritage

u Manufacturing through the wall systems for over 40 years with over 1 5 million units in the fieldwith over 1.5 million units in the field

Agency Certificationu Certified by third party agencies for reliability

Warrantyu 5 year parts & compressoru 10 year warranty aluminized heat exchangeru 20 year stainless heat exchanger

Product Supportu Local distributors spec reps & national toll free numberu Local distributors, spec reps & national toll free number

Product Featuresu Two efficiency levels

St i l t l h t h ti f l t i itu Stainless steel heat exchanger option for gas electric units

Contact Information

Chuck Perry- National Sales ManagerPh (405 259 9572)u Phone (405-259-9572)

u Fax (972-808-8418)George Groh- Magic-Pak Product Manager

u Phone (803-738-4060)u Fax (803-738-4001)

Magic-Pak Applications Lineg ppu Phone (866-282-7257)

– Application & Engineering Questions

– Technical SupportTechnical Support

– Literature / Specification Sheets

– Sales / Marketing / Promotional Items

– After Hours Contact Number

Thank YouMagic PakMagic Pak

Q ti ???Questions???