Post on 17-Jul-2015
Mark Bennett Inventor of Magic Filler
Creator #22409Located at
Jax Landing Food CourtDrop By For
FREE COFFEE SAMPLES!
How many times How many times have you made a have you made a
mess spilling water mess spilling water all over while filling all over while filling your coffee maker?your coffee maker?
The Magic Filler Water Reservoir Filling System can turn most coffee makers (all major brands of automatic drip or single serve) into easy, clean and accurate automatic water filling versions of their prior selves previously only available on very expensive commercial grade machines.
Making The World a Better Making The World a Better Place One Cup at a TimePlace One Cup at a Time
Vote #22409
MAGIC FILLER
With Magic Filler installed, coffee drinkers can simply turn a valve on the side of their coffee maker to fill it’s water reservoir to any desired level.
Can be installed with instructions alone OR our handy installation jig (shown here) that makes installation a snap!
Easy InstallationEasy Installation
Vote #22409
Magic Filler
Installation JigInstallation Jig
Projected Retail MSRP $24.95Basic kit includes filler tube, Magic Filler mounting Plate with attached valve assembly, 9’ ¼” Poly tube, “Y” quick connect splitter. Everything you need.
Basic Magic Filler KitBasic Magic Filler Kit
Our CompetitionOur Competition
Expensive Commercial Machines ($250.00 and up)
Thrown together do it yourself “Frankenstein” systems with unstable connections and bulky fixtures
Keurig Specific expensive replaceable reservoirs (MSRP over $80.00 and doesn’t include any plumbing hookups)
Our CompetitionOur Competition
Industry’s first product designed exclusively to retrofit any coffee maker utilizing our patent pending valve mounting plate
Safe, strong , leak proof connection will outlast your coffee maker
Inexpensive: Our kit will retail for only $24.95
Guarantee- Magic Filler plate will come with a lifetime guarantee
Why Magic Filler?Why Magic Filler?
Patent Pending PlatePatent Pending Plate
We need to raise over $60,000 alone in plastic injection molds to produce our product in mass quantity
Jacksonville Based CompanyPledge to hire disadvantaged workers and pay a living wage
Support Magic Filler and help make everyone morning a little better!
We Need Your Vote We Need Your Vote
VOTE #22409 MAGIC FILLER
Moving FASTMoving FAST
Initial Concept October 17, 2014Fourth design concept went to 3D printing for prototype November 12, 2014Initial prototype deemed too expensive to manufactureFinal design approved for production February 12Applied for Patent February 25, 2015Applied for One Spark February 25, 2015Accepted Venue invite from Jacksonville Landing February 27, 2015
WE NEED YOU!WE NEED YOU!
To help raise funds for:
Custom molds for productionMaterials (valves, tubing, packaging, printing, etc)Expanding product development with “premium” versions of our product line along with an optional installation jig that will make the installation quicker and easier.Truck and trailer for trade shows
Vote #22409
Magic Filler
President and Founder, Mark Bennett
Vice President, Vicki Bennett
Treasurer, Andrew Bennett
Secretary, Travis Bennett
Sales and Marketing, Nate O’Brien
Administration and Social Networking, Chelby Borden
Management TeamManagement Team