Post on 10-Feb-2022
NEW CONSTRUCTION REPIPE PROGRAMWATER HEATER SOLUTION
F1960F1960F1960Quality, Full Flow PEX Fitting SystemQuality, Full Flow PEX Fitting SystemQuality, Full Flow PEX Fitting System
WARRANTY CERTIFICATEIWISS ASTM PEX PIPE TOOLS
Product model number:
Purchase channel:
Order number:
Print name:
E-mail:
Phone:
Purchase date:
Warranty claim date:
Project type:(household, industrial)
Project address:
AST
M
IWISS PEX - A EXPANSION RING INSTALLATIONTOOL
Application
Capacity
Weight
I W I S S T O O L S
ASTM F1960
ASTM F1960 specification covers cold expansion fittings and
cross-linked (PEX) reinforcing rings for use with cross-linked
polyethylene (PEX) plastic tubing in specific nominal diameters.
These fittings are intended for use in residential and commercial,
hot and cold, potable water distribution systems as well as sealed
central heating, including under-floor-heating systems. The PEX
reinforcing rings shall conform to the required density, degree of
cross-linking, and stabilizer migration resistance.
F1960 Installation
1. Cut tube at 90-degrees. Do not crush OD of tubing with cutters.Hint: Slightly rotate cutter during blade engagement.
2. Install PEX sleeve onto OD of tubing.
3. Using tube expander, expand sleeve fully. Repeat expansions, rotating expander 1/8-turn between expansions.
5. The installation is complete with a visibly secure connection. Remove defective connections. Test completed joint.
F1960 Application Problems
3/8" Jaw(Optional) 1/2" Jaw 3/4" Jaw 1" Jaw
ASTM F1960
3/8",1/2",3/4",1"
Material
ASTM F1960
1/2",3/4",1"
Galvanized Aluminum
Part No.
Asin
IWS-1960 IWS-1960MC
B00MP4O1QI B078SM7KRB
Length
JAWS
0.74kg /1.63 lb0.70kg /1.50 lb
364 mm/14.3 inch364 mm/14.3 inch
There is virtually no maintenance required. However,it's good practice to keep indenter tipsfree of residual deposits
and other debris.
We strongly recommend that you:
1. Clean tool to remove debris regularly.
2. Don’t spray oil into tool to lubricate.
3. Don't attempt to disassemble tool or make repairs.
Care of tool
Improperly inserted fitting
Damagedsealing barbwill not sealproperly
SPECS
Tubing : PEX-A
Fitting: Expansion Ring
Application: ASTM F1960
Type: Tool
Bad
Good
Damaged, cut or grooved sealing barb.
Fitting not inserted completely into expanded tube and ring. Ring not fully covering PEX tubing.
Expansion did not rotate between multiple expansions, leaving a groove or leak path past the fitting barb.