Post on 24-Feb-2018
Tele
phon
e 0
845
123
546
4Em
ail
info
@sa
vem
one
ycut
carb
on.
com
Web
w
ww
.sav
emo
neyc
utca
rbo
n.co
m
LutronEcoSystem 5-Series LED DriverLDE53E1CRN-JA105
® SPECIF ICAT ION SUBMITTAL Page
Job Name:
Job Number:
Model Numbers:
LED Dimming Driver EcoSystem® 5-Series LED Driver for Europe 5% Dimming
369753b 1 12.17.13
EcoSystemR 5-Series LED Driver (220 - 240 V~, CE)
EcoSystemR 5-Series LED Drivers provide a high performance solution for any space in any application, while providing smooth, continuous dimming down to 5% of output current.
Features
• Continuous, flicker-free dimming from 100% to 5% 1
• Guaranteed dimming performance when used with LutronR controls
• Compatible with Energi Savr NodeT EcoSystemR and ESN DALI units, GRAFIK EyeR QS control unit with EcoSystemR, PowPakR dimming module with EcoSystemR, QuantumR systems and HomeWorksR QS systems, allowing for integration into a planned or existing EcoSystemR lighting control solution
• Protected from miswires of input power to EcoSystemR control inputs
• CE compliant & ENEC certified
• Independent control gear with integral strain relief
• SELV output
• A rated lifetime of 50 000 hours at 40 °C ambient
• 100% performance tested at factory
• RoHS compliant
• Non-volatile memory restores all settings after power failure
• Constant-current reduction dimming
• For more information please go to: www.lutron.com/5SeriesLED
EcoSystem® LED Driver
53.7 mm W x 30.8 mm H x 215.0 mm L
1 Light output at 5% depends on the efficacy of the light engine used with the driver.
Neutral
Primary
NL
E1E2
N/CDigital Bus
N/C
N/C
-V+V
SELV
Seco
ndar
y
EcoSystem® LED Driver
lutron.com
EcoSystem® 5-Series LED5% Dimming LED Driver
+44.(0)20.7680.4481
•••• -V
+V
9 99
9999
999
987LDE53E1CRN-RA070
t c
15,0 m (50 ft) MaxLineE1E2
N/C
LED LoadOnly
SEC: 700 mA
35 W
® SPECIF ICAT ION SUBMITTAL Page
Job Name:
Job Number:
Model Numbers:
LED Dimming Driver EcoSystem® 5-Series LED Driver for Europe 5% Dimming
369753b 1 12.17.13
EcoSystemR 5-Series LED Driver (220 - 240 V~, CE)
EcoSystemR 5-Series LED Drivers provide a high performance solution for any space in any application, while providing smooth, continuous dimming down to 5% of output current.
Features
• Continuous, flicker-free dimming from 100% to 5% 1
• Guaranteed dimming performance when used with LutronR controls
• Compatible with Energi Savr NodeT EcoSystemR and ESN DALI units, GRAFIK EyeR QS control unit with EcoSystemR, PowPakR dimming module with EcoSystemR, QuantumR systems and HomeWorksR QS systems, allowing for integration into a planned or existing EcoSystemR lighting control solution
• Protected from miswires of input power to EcoSystemR control inputs
• CE compliant & ENEC certified
• Independent control gear with integral strain relief
• SELV output
• A rated lifetime of 50 000 hours at 40 °C ambient
• 100% performance tested at factory
• RoHS compliant
• Non-volatile memory restores all settings after power failure
• Constant-current reduction dimming
• For more information please go to: www.lutron.com/5SeriesLED
EcoSystem® LED Driver
53.7 mm W x 30.8 mm H x 215.0 mm L
1 Light output at 5% depends on the efficacy of the light engine used with the driver.
Neutral
Primary
NL
E1E2
N/CDigital Bus
N/C
N/C
-V+V
SELV
Seco
ndar
y
EcoSystem® LED Driver
lutron.com
EcoSystem® 5-Series LED5% Dimming LED Driver
+44.(0)20.7680.4481
•••• -V
+V
9 99
9999
999
987LDE53E1CRN-RA070
t c
15,0 m (50 ft) MaxLineE1E2
N/C
LED LoadOnly
SEC: 700 mA
35 W
Telephone 084
5 123 546
4Em
ail info@
savemo
neycutcarbo
n.com
Web w
ww
.savemo
neycutcarbo
n.com
® SPECIF ICAT ION SUBMITTAL Page
Job Name:
Job Number:
Model Numbers:
LED Dimming Driver EcoSystem® 5-Series LED Driver for Europe 5% Dimming
369753b 2 12.17.13
Neutral
Primary
NL
E1E2
N/CDigital Bus
N/C
N/C
-V+V
SELV
Seco
ndar
y
EcoSystem® LED Driver
lutron.com
EcoSystem® 5-Series LED5% Dimming LED Driver
+44.(0)20.7680.4481
•••• -V
+V
9 99
9999
999
987LDE53E1CRN-RA070
t c
15,0 m (50 ft) MaxLineE1E2
N/C
LED LoadOnly
SEC: 700 mA
35 W
Specifications
Performance• Dimming Range: 100% to 5% 1 • Dimming method: constant-current reduction
Refer to LutronR application note #360 for details• Operating Voltage: 220 - 240 V~ at 50/60 Hz• Lifetime: 50 000 hours @ ta = 40 °C 2
• Patented thermal foldback protection• LED lighting turns on to any dimmed level without
flashing to full brightness• Non-volatile memory restores all driver settings after
power failure• Power Factor: λ > 0.95 at 25 W and 35 W
maximum power λ > 0.93 at 15 W maximum power λ > 0.91 at 13 W maximum power • Typical standby power consumption: 0.5 W• Meets Harmonics requirements for IEC-61000-3-2• Output open circuit protected• Output short circuit and overload protected• Turn-on time: < 100 ms typical from electronic off
Environmental
• Sound rated: inaudible in 24 dB ambient• Relative Humidity: maximum 90% non-condensing• Operation Range: ta = 0 to 50 °C 2
• Maximum case temperature: tc = 85 °C at 25 W, and 35 W maximum power tc = 75 °C at 13 W, 15 W, and 18 W maximum power
1 Light output at 5% depends on the efficacy of the light engine used with the driver.
2 Where ta is the temperature of the air directly surrounding the driver.
Regulatory Approvals and Compliance• CE compliant and ENEC certified – Safety: IEC/EN 61347-2-13 – Emissions: CISPR15/EN55015, IEC 61000-3-2, 3-3 – Immunity: IEC/EN 61547,
IEC/EN 61000-4-2, -4-3, -4-4, -4-6, -4-11 – Performance: IEC/EN 62384 • RoHS 2006 Compliant• IEC 60529, IP20 Rating• DALI Compliant• Compliant with IEC62386-207• LutronR Quality Systems registered to ISO 9001.2008• Manufacturing facilities employ ESD reduction
practices that comply with the requirements of ANSI/ESD S20.20.
•tc
Tele
phon
e 0
845
123
546
4Em
ail
info
@sa
vem
one
ycut
carb
on.
com
Web
w
ww
.sav
emo
neyc
utca
rbo
n.co
m
® SPECIF ICAT ION SUBMITTAL Page
Job Name:
Job Number:
Model Numbers:
LED Dimming Driver EcoSystem® 5-Series LED Driver for Europe 5% Dimming
369753b 3 12.17.13
Driver Wiring & Mounting
• Wiring Method: daisy chain capable terminals for input• Torque range on terminal screws: 0.45 to 0.50 N•m• Torque range on strain relief screws: 0.50 to 0.80 N•m• Power Input Terminals: – Daisy chain capable wire size: 0.75 – 2.50 mm(
– Daisy chain, Line, and Neutral Maximum: 20 units 1
− Second pair of terminals provided to daisy chain Line and Neutral
– When placing multiple wires in the same strain relief, all wire diameters must be the same
• EcoSystemR Terminals: – Daisy chain capable (2 cable per terminal) wire size:
0.75 – 1.50 mm(
– Not daisy chain capable (1 cable per terminal) wire size: 1.75 – 2.50 mm(
– When placing multiple wires in the same strain relief, all wire diameters must be the same
• Output Terminals: – Wire size: 0.75 – 1.50 mm(
• Maximum lamp-to-driver wire length is 15 m using 0.75 - 1.50 mm2 wire.
• Maximum Number of Drivers on Miniature Circuit Breaker:
– 16 A Type B: 20 drivers – 16 A Type C: 34 drivers• Provide adequate space to ensure convective
cooling of LED driver. Remove any insulation or heat generating equipment or obstruction within 150 mm of LED driver.
Note: Ground termination not provided. Terminate ground in compliance with local electric codes.
OEM Notes• For best dimming performance, Lutron recommends
electrical insulation with 50 / 60 Hz impedance of at least 12 MΩ and minimum breakdown voltage of at least 1 500 V~ between LEDs and fixture chassis.
1 Subject to wire size limitations. See Power Wiring Diagram page for wiring diagrams.
Telephone 084
5 123 546
4Em
ail info@
savemo
neycutcarbo
n.com
Web w
ww
.savemo
neycutcarbo
n.com
® SPECIF ICAT ION SUBMITTAL Page
Job Name:
Job Number:
Model Numbers:
LED Dimming Driver EcoSystem® 5-Series LED Driver for Europe 5% Dimming
369753b 4 12.17.13
Model Numbers:
Model Number Maximum Power Rated Output Current
Compatible Load Voltage Range at Rated Output Current
Typical Efficiency at Maximum Power
LDE53E1CRN-RA070 20 to 35 W 0.700 A 27.7 to 50.0 V 87%
LDE53E1CRN-JA105 20 to 35 W 1.050 A 18.8 to 33.3 V 86%
LDE53E1CRN-LA140 18 to 35 W 1.400 A 12.9 to 25.0 V 86%
LDE52E1CRN-PA050 12 to 25 W 0.500 A 24.0 to 50.0 V 85%
LDE52E1CRN-FA070 12 to 25 W 0.700 A 16.4 to 35.7 V 84%
LDE52E1CRN-MA105 12 to 25 W 1.050 A 11.0 to 23.8 V 84%
LDE52E1CRN-KA140 13 to 25 W 1.400 A 9.3 to 17.9 V 84%
LDE51E1CRN-GA035 8 to 18 W 0.350 A 22.2 to 51.4 V 83%
LDE51E1CRN-NA050 8 to 15 W 0.500 A 15.0 to 30.0 V 80%
LDE51E1CRN-GA025 8 to 13 W 0.250 A 32.0 to 52.0 V 80%
LDE51E1CRN-QA070 7 to 15 W 0.700 A 10.0 to 21.4 V 80%
LDE51E1CRN-SA105 7 to 15 W 1.050 A 6.6 to 14.3 V 80%
Tele
phon
e 0
845
123
546
4Em
ail
info
@sa
vem
one
ycut
carb
on.
com
Web
w
ww
.sav
emo
neyc
utca
rbo
n.co
m
® SPECIF ICAT ION SUBMITTAL Page
Job Name:
Job Number:
Model Numbers:
LED Dimming Driver EcoSystem® 5-Series LED Driver for Europe 5% Dimming
369753b 5 12.17.13
Case Dimensions (typical)
A 53.7 mmB 215.0 mmC 30.8 mmD 60.0 mmE 26.8 mmF 208.1 mm
Mounting Centers• Recommended mounting screw: M3.5
D
E
A
B
C
F
Telephone 084
5 123 546
4Em
ail info@
savemo
neycutcarbo
n.com
Web w
ww
.savemo
neycutcarbo
n.com
® SPECIF ICAT ION SUBMITTAL Page
Job Name:
Job Number:
Model Numbers:
LED Dimming Driver EcoSystem® 5-Series LED Driver for Europe 5% Dimming
369753b 6 12.17.13
EcoSystem® LED Driver Wiring Diagrams
EcoSystemR Digital Link Overview
• The EcoSystemR Digital Link wiring (E1 and E2) connects the drivers together to form a lighting control system.
• For EcoSystemR link limits, refer to EcoSystemR control specifications.
• E1 and E2 (EcoSystemR digital link wires) are polarity insensitive and can be wired in any topology.
• An Energi Savr NodeT with EcoSystemR unit, GRAFIK EyeR QS control unit with EcoSystemR, PowPakR dimming module with EcoSystemR, QuantumR system or HomeWorksR QS system provides power for the EcoSystemR Digital Link and supports system programming.
• All EcoSystemR Digital Link programming is completed by using the Energi Savr App for Apple iPad, iPod Touch or iPhone mobile digital devices, GRAFIK EyeR QS with EcoSystemR, PowPakR dimming module with EcoSystemR, QuantumR system or HomeWorksR QS system.
EcoSystemR Digital Link Wiring
• Driver EcoSystemR Digital Link terminals may either accept one 0.75 to 2.50 mm2 solid or stranded copper wire per terminal or two 0.75 to 1.50 mm2 solid or stranded copper wires per terminal.
• Make sure that the mains breaker to the Driver and EcoSystemR Digital Link Supply is OFF when wiring.
• Connect the two conductors to the two Driver terminals E1 and E2 as shown.
• To avoid confusion and shorting the link when daisy chaining several drivers, the use of different color wires is recommended.
• Consult applicable electrical codes for proper wiring practices.
Notes
• The EcoSystemR Digital Link Supply does not have to be located at the end of the Digital Link.
• EcoSystemR Digital Link length is limited by the wire gauge used for E1 and E2 as follows:
Wire Size Digital Link Length (maximum)
2.50 mm2 500 m1.50 mm2 300 m1.00 mm2 200 m0.75 mm2 150 m
To other EcoSystemR Digital Link compatible devices (for PowPakR up to 32 total devices, for all other EcoSystemR products: up to 64 total devices)
EcoSystemR Daisy Chain Wiring
Apple, iPad, iPod Touch, and iPhone are trademarks of Apple Inc., registered in the U.S. and other countries.
N/C E1 E2Digital Bus
N/C E1 E2Digital Bus
UNIT 1 UNIT 2
Tele
phon
e 0
845
123
546
4Em
ail
info
@sa
vem
one
ycut
carb
on.
com
Web
w
ww
.sav
emo
neyc
utca
rbo
n.co
m
® SPECIF ICAT ION SUBMITTAL Page
Job Name:
Job Number:
Model Numbers:
LED Dimming Driver EcoSystem® 5-Series LED Driver for Europe 5% Dimming
369753b 7 12.17.13
Power Wiring Diagram
Up to 20 EcoSystemR Drivers can have their power input terminals chained together, while 64 digital terminals can be chained
Up to 64 total devices on the EcoSystemR or DALI Link.Up to 32 total devices per EcoSystemR Link on the PowPakR dimming module with EcoSystemR.
Line/Hot
Neutral
EcoSystemR or DALI Bus
EcoSystemR or DALI Bus
Line/HotLine/HotNeutralNeutral
EcoSystemR or DALI Bus
1 2 3 4 20
Tele
phon
e 0
845
123
546
4Em
ail
info
@sa
vem
one
ycut
carb
on.
com
Web
w
ww
.sav
emo
neyc
utca
rbo
n.co
m
® SPECIF ICAT ION SUBMITTAL Page
Job Name:
Job Number:
Model Numbers:
LED Dimming Driver EcoSystem® 5-Series LED Driver for Europe 5% Dimming
369753b 8 12.17.13
Hi-lume A-Series
**
Dimmed Hot
Switched Hot
NeutralGround
To3-wire
DimmingControl
+V
Ground*
-V†
†
LED light engine
Hi-lume A-Series
**
Dimmed Hot
NeutralGround
To ELVDimmingControl
+V
Ground*
-V†
†
LED light engine
RED
BLUE
YELLOW
BLUE/WHITE
LAMPS
7 ft Max. lead length
P/N
500-
1336
2 R
ev. A
NEU
N/C
SH
B/W
B/W
BLU
BLU
RED
YEL
YEL
E1
E2
NEUTRAL
SWITCHED HOT
TO
EcoS
yste
m® H
BUS
E1
E2
Ecosystem® H Ballast
CALIB
RATION
P O I N TCoopersburg, PA 18036 USA RED
Programmed Rapid Start 1% Electronic Fluorescent Dimming Ballast
CLASS 2 BUS
LINE
®
Solid 18 or 16 AWG wire for power and bus terminals 18 AWG wire only for lamps.
5/16 in (8 mm)
1-800-523-9466
Copper wire only
Consult lamp manufacturer for lamp seasoning requirements prior to dimming.
Warranty void if unit is opened.
WARNING: Shock hazard. May result in serious injury or death. Disconnect power before servicing or installing.
Calibration point temperature not to exceed 65 °C.Maximum case temperature 75 °C.
Ecosystem® H
TO LI
NEVO
LTAG
ESO
URCE
Pantone362
500-13362 Rev. ALabel Size: 6.87” x 2.125” Corner Radius: 0.0625”
Colors:Pantone186
Pantone1585
Pantone116
Pantone3005
Pantone2583
PantoneBlack
Wiring Diagram for EcoSystem® Digital Control
ATTENTION ELECTRICIANS and CONTRACTORS
Driver Leads
Lead lengths from driver to LED light engine must not exceed 15 m.
Wiring
Drivers must be installed per national and local electrical codes.
Provide adequate space to ensure convective cooling of LED driver. Remove any insulation or heat generating equipment or obstruction within 150 mm of LED driver.
Maximum Operating Temperature:
Drivers must not exceed the rated calibration point temperature (tc)
ATTENTION FACILITIES MANAGERS
SERVICE
Warranty
For warranty information, please see http://www.lutron.com/TechnicalDocumentLibrary/Ballast%20and%20Driver%20Warranty.pdf
Replacement Parts
Use replacement parts with exact LutronR model numbers. Consult LutronR if you have any questions.
Contact Information
For further information, please visit us at http://www.lutron.com/europe or contact LutronR Technical Support at +44.(0)20.7680.4481 (Europe) +1.610.282.3800 (USA Headquarters)
Please provide exact model number when calling.
* Maximum lamp-to-driver wire length is 15 m using 0.75 - 1.50 mm2 wire.
Neutral
EcoSystem® 5-Series LED Driver
V+ * (Red)
LED light engine
V- * (Black)
To Mains
To EcoSystem®
digital link
Line
E1
E2
Wire Size (mm2)
Model Number
Driver Rating
(A) 0.5 0.75 1.0 1.5 2.5LDE53E1CRN-LA140LDE52E1CRN-KA140
1.40 4 6 8 11 15
Maximum Wire
Length (m)
LDE53E1CRN-JA105LDE52E1CRN-MA105LDE52E1CRN-SA105
1.05 7 10 13 15 15
LDE53E1CRN-RA070LDE52E1CRN-FA070LDE51E1CRN-QA070
0.70 15 15 15 15 15
LDE52E1CRN-PA050LDE51E1CRN-NA050
0.50 15 15 15 15 15
LDE51E1CRN-GA035 0.35 15 15 15 15 15LDE51E1CRN-GA025 0.25 15 15 15 15 15