Post on 04-Jul-2015
description
ABB Australia Pty Limited ABB
SERIES - RISSUE A-2002
-1-
Price List Numbering System
TYPErated voltage (kV) BIL
rated current (A)
crossarmNO. Lenght
1.one or2.twox-arm
*standard lenght 2400mm other lenght available on request.
R X X 800 X 2400 X X X
D-disconnectorS-switch
mountingH-horizontalV-vertical
pole
1. single pole2. twin pole
*see phase base option table
R
Please order as above: -selection required
DESCRIPTION PRICE ($) X DESCRIPTION PRICE ($) X
Interphase Shaft
Cable Clamps Cable Clamp
OPTIONS
1. option for 40mm-193mm cable or
2. option for15mm-323mmcable.
Phase Base
OPTIONS
1. 12-24kV,150BILD-disconnector 2. 12-24kV,150BILS-switch 3.36kV,200BILD-disconnector 4.36kV,200BILS.switch 5.36kV,250BILD-disconnector 6.36kV,250BILS-disconnector
NOTE:select only one option.
2400mm lenght
Material:galvanisedsteel.*OPTIONS:LENGHTSavailable in 300mmincrements(1500-3000)mm.
NOTE:equipment based on 8m max pole height andsingle crossarm-single pole configuration.For other refer examples on next page.
X
Downrod
OPTIONS
1=2 off 4m 25NB or
2=2 off 24 NB pipe +1 off 1m fibre glassinsulation section.
Mounting Bracket &accessories
2 2
2 2
R - SERIES SELECTION
ABB Australia Pty Limited
D-phase base
S-phase base
Crossarm
Downrod(select only one option)
set of 6
set of 6
-2-
E/cable(1off)
Crank Assy(1off)
Handle(1off)
Intermidiate Support (1off)(included when lenghtof the downrodexceeds 3m.
Mounting Bracket(1off)
U-bolt assembly(8off)
ABB Australia Pty Limited
single crossarm onsingle pole construction(vertical or horizontal mounting)
SEE FOLLOWING OPTIONS FOR DIFFERENTCONFIGURATION OF THE SWITCH-DISCONNECTOR
OPTION:-stringing kit(horizontal mounting only)
twin crossarm onsingle pole construction(vertical or horizontal mounting)
single crossarm ontwin pole construction(vertical or horizontal mounting)
OPTION:-outboard bearing(vertical or horizontal mounting )
twin crossarm ontwin pole construction(vertical or horizontal mounting)
OPTION:-outboard bearing(vertical or horizontal mounting)
R- SERIES E/SWITCH (vertical or horizontal mounting)
R- SERIES powder filled fuse (vertical mounting only)
R- SERIES EDO(vertical mounting only)
OPTION:-stringing kit(horizontal mounting only)
-3-
R 24kV 150BIL 800A 1 2400 D V 1
EXAMPLE:
Rated Current: 800A ,1200A , 2000A Rated Voltage: 12-24kV 36kV Short Time Withstand: BIL: 125-150kV 200kV 250kV Creepage: 380 660,1060 1370
20kA for 3s 25kA for 3s 25kA for 1s 31.5kA for 1s
ABBABB Australia Pty LimitedABN 23 000 169 568Bapaume RoadMoorebank,NSW 2170Telephone: +61 (0) 2 9821 0111 FAX: +61 (0) 2 9601 2873Internet : www.abbnet.com.au email : outdoor @ au.abb.com 7505968-1/2.IDW
2400,00
(customer spec.)(customer spec.)
NOTE:switches are supplied in kit form with assembly and mounting instruction.
TECHNICAL DETAILS:
-4-