Post on 14-Jan-2016
lindab | we simplify construction
• Smart energy saving solutions
• Design a sustainable future at no extra cost!
• eHybrid – Simplifies construction
lindab | we simplify construction
eHybrid
Did you know that the average office space is only occupied for 50-70% of working hours so why do we consume valuable energy when it’s not really needed?
Every single person on earth consumes about 2,600 kWh of
electrical energy each year. (Source: IEA 2005).
• Global average - 2,600
• USA - 14,000
• Europe - 6,000
• India – 500
Since the global population is growing and humanity is historically inclined towards consuming more electricity for comfort, convenience and industrial purposes. So, how can you contribute to change the future?
lindab | we simplify construction
eHybrid
lindab | we simplify construction
eHybrid damper details:
Supply air damper Dobbelt damper
lindab | we simplify construction
eHybrid
Demand control sensitivity
• Smart sensitivity
• Can be placed on different lokation in the system.
lindab | we simplify construction
eHybrid
Lindab let’s you design a sustainable future at no extra cost!
Lindab have combining all supplying functions into one ‘plug and play’ unit:
• Ventilation
• Heating
• Cooling
• Lighting
This saves both space and installation costs. In practise, this means the best indoor climate at no additional cost, and with the 34% lower energy consumption.
The eHybrid solution sets new standards for an economical, sustainable and comfortable indoor climate
lindab | we simplify construction
eHybrid
eHybrid – Simplifies construction…
One unit with all energy saving solutions
• Presence sensor
• Regula Combi control
• Supply air
• Exhaust air
• Cooling
• Heating
• Ventilation
• Lighting
• Integrated/external light regulation
lindab | we simplify construction
eHybrid
Smart energy saving solutions
Combining demand controlled technology into the eHybrid solution
results in a number of energy saving advantages:
• Heating
• Lighting & auto levelling
• Demand controlled ventilation air volume
• Demand controlled cooling capacity
Demand controlled lighting and automatic light levelling reduces energy consumption.
A recent study by the independent consultant WSP, comparing a conventional chilled beam solution with eHybrid, clearly shows the reduced energy consumption of eHybrid. WSP’s calculations, resulted in a typical energy saving of around 34% using eHybrid.
lindab | we simplify construction
eHybrid
Smart technology for energy savings
lindab | we simplify construction
eHybrid
Smart technology for energy savings
This diagram shows how much energy you are able to save by using Lindab’s eHybrid solution,
the energy consumption of both solutions is based on WSP’s study.
lindab | we simplify construction
eHybrid
Regula Connect makes it easy to connect all necessary functionality for a group of eHybrid units.
Regula Combi is a room regulator for cooling and heating in sequence that controls a single or
a group of beams
Regulation system
Dali-busDali-bus
ActilumActilum
Modbus/Exoline
eSenseeSense
lindab | we simplify construction
eHybrid
Regulation system Regula Connect
lindab | we simplify construction
eHybrid
Regulation system Regula Connect
lindab | we simplify construction
eHybrid
eHybrid component details:
• Presence sensor
• Regula Combi
• Regula Connect
• Cooling valve
• Heating valve
• Ventilation supply valve
• Ventilation exhaust valve
• Lighting
• Room light regulation
• Dampers supply/exhaust
lindab | we simplify construction
lindab | we simplify construction
eHybrid
Animations:
• 3D animation
• Product movie clip
lindab | we simplify construction
eHybrid
eHybrid campaign material :
• 3D animated ”Lindab House”
• Product movie clip
• Powerpoint
• Brochure
• Press release
• Advertisement
• Roll up
• Technical dokumentation
• Installation instruction