www.engineersinc.in

This is an isometric view depicting alternate connection of the residential steel wall framing to the foundation.

This is an isometric detail of a steel header created using back to back steel C-shapes.

This is an isometric detail of a box beam steel header.

This is an isometric view of a typical cantilevered joist connection.

This is an isometric detail of a typical steel framing wall corner.

This plan view shows two typical steel framing wall corners.

This is an isometric view depicting the connection of the steel floor to the foundation at braced wall.

This is an isometric view depicting the connection of the steel floor with rim strap to the foundation.

This is an isometric view depicting the heel joint connection.

This is an isometric view depicting two ways to patch web holes.

This is an isometric view depicting the connection of the lapped joist on an interior structural wall.

This detail shows the typical rafter connection at the ridge member.

This is an isometric view depicting standard steel frame partition wall with only wall sheathing for cross bracing.

This is an isometric view depicting the connection of the steel wall framing to the foundation.

This detail depicts the installation and load capacities for the double 'L' shaped steel header.

This detail depicts the connection of a steel framed wall to a steel framed floor on a standard foundation wall.

This detail depicts the connection of a wood framed wall to a steel framed floor on a standard foundation wall.

This detail depicts a non-structural steel framed wall opening with wood bucking for door/window frame attachment

This detail displays the connection details of a wood soffit/overhang to steel framed wall and roof framing

This is an isometric view of a steel framed floor between wood framed walls

This is an isometric view of the framing connection between a non-structural steel interior partition and structural wood joists or trusses.

This is a section view of a steel framed floor between wood framed walls.

This detail depicts wood backing in a steel framed wall for use with shelf or cabinet installation

This detail depicts proper framing of a wood beam in a steel frame wall. It also notes the load capacities of steel jack studs.

This detail depicts the use of wood cabinet hanger strips on a steel framed wall.

This is an isometric view of a wood framed floor between steel framed walls.