Post on 30-Jun-2018
Ladies and Gentlemen,
In the last few years LaCont has developed into one of the leading European manufacturers in the field ofstorage facilities for hazardous substances. Year after year we have introduced TÜV-tested and approvednew developments and further improvements in our LaCont main catalogue.
You know all about our manufacturing know-how for the production of collection troughs, shelving andcontainer systems for water-endangering and flammable substances.
Since starting with the production in Egeln of Type 90 storeLAB® safety cabinets in 2005 we have paid particular attention to the development of an innovative complete range of safety cabinets for hazardoussubstances. This means that today we can present (not without pride) our full range of storeLAB® safetycabinets in this catalogue:
Contents:
Chemicals and poisons cabinets ............. from page 3
Acid and alkali cabinets .......................... from page 13
Combi cabinets ....................................... from page 19
Hazardous substances cabinetsas per EN 14470-1 (Type 30)................... from page 27
Hazardous substances cabinetsas per EN 14470-1 (Type 90)................... from page 31
Gas cylinder cabinets .............................. from page 58
And now have a lot of fun indiscovering the storeLAB diversity.
Explanation of the symbols:
Indoor storage Outdoor storage Indoor or outdoorstorage
Ü-sign acc. to regulationfor base troughs made
of steel sheet
According to § 19 I ofthe Water Management
Act (WHG)
Whole construction tested and approved by a recognized materialstesting institute as per EN 14470-1 (Type 30, Type 60 or Type 90)
with a fire resistance of > 30, 60, 90 minutes
LACONTUmwelttechnik GmbH
Halberstädter Str. 20a • D-39435 Egeln
Phone +49 (0) 39 268 / 98 96 - 0
Fax +49 (0) 39 268 / 98 96 - 29
E-Mail: info@lacont.de
Internet: http://www.lacont.deKlaus Heßmer, Managing Director
Chemicals and
poisons cabinets
CONTENTS CHEMICALS AND POISONS CABINETS
3
Chemicals and poisons cabinets ...
Chemicals and poisons cabinets
with dispensing chemist’s shelving . . . . . . . . . . . . . . . . . . . . . . . . . . Page 12
Chemicals and poisons cabinets
for canisters. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Page 7
Chemicals and poisons cabinets
for two 60-litres-drums / CHS-2FAS 950 . . . . . . . . . . . . . . . . . . . . . . Page 9
Chemicals and poison cabinets
for one 200-litres-drum / CHS-1FAS 950-660 . . . . . . . . . . . . . . . . . . Page 10
Chemicals and poisons cabinets
for two 200-litres-drums / CHS-2FAS 1500 . . . . . . . . . . . . . . . . . . . . Page 11
Chemicals and poisons underbench cabinets . . . . . . . . . . . . . . . . . . Page 4
Chemicals and poison cabinets
for one 60-litres-drum / CHS-1FAS 950. . . . . . . . . . . . . . . . . . . . . . . Page 8
Chemicals and poisons cabinets
Height 1000 / 1950 mm . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Page 4/5
Chemicals and poison cabinets
with pull-out trough / sliding doors . . . . . . . . . . . . . . . . . . . . . . . . . Page 6
Branded qu
ality
MADE by LA
CONT
NEW
NEW
NEW
NEW
NEW
NEW
CHS 950-1000, Art.-No. B80-6122-A
CHS 500-1000, Art.-No. B80-6120-A
4
CHS – AUS UNDERBENCH CABINETS
For storage of harmful, water-endangering, toxic and very
toxic liquids
Single-wall body made of high-quality powder-coated
steel sheet in RAL 7035 – light grey
Door(s) with central cylinder lock
Ventilation openings in the door(s)
DN 75 ventilation connection for exhaust air
extraction at rear panel
Base trough made of powder-coated steel sheet,
3 mm, in RAL 7035 – light grey in accordance
with § 19 WHG, with Ü-sign according to
regulations for base troughs made of steel
sheet
.
.
.
.
.
CHS-AUS 600, Art.-No. B80-6223-A
CHS-AUS 1100, Art.-No. B80-6220-A
CHEMICALS AND POISONS CABINETS as per TRGS 514 / TRGS 526 / BGR 120Chemicals and
poisons cabinets
Model CHS-AUS 600 CHS-AUS 1100
External dimensions W x D x H in mm 600 x 570 x 600 1100 x 570 x 600
Internal dimensions W x D x H in mm 525 x 525 x 400 1025 x 525 x 480
Collection volume in litres 30 30
Door(s) 1 (DIN right) 2
Weight (kg) 27 45
Art.-No., outer body:RAL 7035 – light grey B80-6223-A B80-6220-A
CHS HEIGHT 1000 MM
For storage of harmful, water-endangering, toxic and very toxic liquids
Single-wall body of high-quality powder-coated steel sheet
in RAL 7035 – light grey
Door(s) with central cylinder lock
Ventilation openings in the door(s)
Trough-shaped shelves
- non-tilt, max. load 70 kg / shelf
- height adjustable at intervals of 25 mm
DN 75 ventilation connection for exhaust air extraction at
rear panel
With inner fittings:
CHS 500-1000 / CHS 950-1000:
- 1 trough-shaped shelf (EW), powder-coated steel sheet
in RAL 7035 – light grey
- Base trough (BW) made of powder-coated steel sheet,
3 mm, in RAL 7035 – light grey in accordance with § 19 WHG,
with Ü-sign according to regulations for base troughs made of
steel sheet
.
.
.
.
.
.
Model CHS 500-1000 CHS 950-1000
External dimensions W x D x H in mm 500 x 500 x 1000 950 x 500 x 1000
Internal dimensions W x D x H in mm 412 x 467 x 894 862 x 467 x 894
Collection volume in litres BW 1 x 30 / EW 1 x 20 BW 1 x 30 / EW 1 x 20
Door(s) 1 (DIN right) 2
Weight (kg) 25 39
Art.-No., outer body:RAL 7035 – light grey B80-6120-A B80-6122-A
Extraction fansplease seepage 54 !
CHEMICALS AND POISONS CABINETS as per TRGS 514 / TRGS 526 / BGR 120
5
For storage of harmful, water-endangering, toxic and very toxic
liquids
CHS 950, Art.-No. B80-6210-A
CHS 500, Art.-No. B80-6211-A
CHEMICALS AND POISONS CABINETS - HEIGHT 1950 MM
Model CHS 500 CHS 950 CHS 950 GL CHS 1200
External dimensions W x D x H in mm 500 x 500 x 1950 950 x 500 x 1950 950 x 500 x 1950 1200 x 500 x 1950
Internal dimensions W x D x H in mm 412 x 467 x 1844 862 x 467 x 1844 862 x 467 x 1844 1112 x 467 x 1844
Collection volume in litres BW 1 x 30 / EW 3 x 20 BW 1 x 30 / EW 3 x 20 BW 1 x 30 / EW 3 x 20 BW 1 x 39 / EW 3 x 20
Door(s) 1 (DIN right) 2 2 (acrylic glass doors) 2
Weight (kg) 48 76 76 100
Art.-No., outer body:RAL 7035 – light grey B80-6211-A B80-6210-A B80-6216-A B80-6212-A
Single-wall body made of high-quality powder-coated steel sheet in RAL 7035 – light greyDoor(s) with central cylinder lock – model GL withacrylic glass doorsVentilation openings in the door(s)Trough-shaped shelves- non-tilt, max. load 70 kg / shelf- height adjustable at intervals of 25 mmDN 75 ventilation connection for exhaust air extractionon cabinet roof With inner fittings: CHS 500 / CHS 950 / CHS 950 GL / CHS 1200:- 3 trough-shaped shelves (EW), powder-coated steel sheet in RAL 7035 - light grey
- Base trough (BW) made of powder-coated steelsheet, 3 mm, in RAL 7035 - light grey in accordancewith § 19 WHG, with Ü-sign according toregulations for base troughs made of steel sheet
.
.
.
.
.
.
CHS 1200, Art-No. B80-6212-A
Accessories Art.-No. Art.-No. Art.-No. Art.-No.Trough-shaped shelf RAL 7035 B80-2827-A B80-2826-A B80-2826-A B80-6127-A
PE-insert for base trough,for storing aggressive media B80-2829-A B80-2828-A B80-2828-A B80-6129-A
PE-insert for trough-shaped shelf,for storing aggressive media B80-2831-A B80-2830-A B80-2830-A B80-6128-A
Safe compartments B80-6253-A B80-6243-A B80-6243-A B80-6254-A
Extraction fansplease seepage 54 !
CHS 950 GL, Art.-No. B80-6216-A
Chemicals and
poisons cabinets
CHEMICALS AND POISONS CABINETS as per TRGS 514 / TRGS 526 / BGR 120
6
For storage of harmful, water-endangering, toxic and very toxic liquids
CHS 950 VS, Art.-No. B80-6217-A
CHS 1800, Art.-No. B80-6219-A
CHEMICALS AND POISONS CABINETS VS
CHEMICALS AND POISONS CABINETS CHS 1800
Single-wall body made of high-quality powder-coated steel sheet
in RAL 7035 – light grey
Doors with central cylinder lock
DN 75 ventilation connection for exhaust air extraction at rear panel
Ventilation openings in the doors
With inner fittings:
- Trough-shaped shelves (EW), non-tilt, max. load 70 kg / shelf
height adjustable at intervals of 25 mm
- 2 pull-out troughs (AW) to full extent, max. load 50 kg
- Base trough (BW) made of powder-coated steel sheet, 3 mm,
in RAL 7035 – light grey in accordance with § 19 WHG,
with Ü-sign according to regulations for base troughs made of
steel sheet
.
.
.
.
.
For storage of harmful, water-endangering, toxic and very toxic liquids
Single-wall body made of high-quality powder-coatedsteel sheet in RAL 7035 – light grey2 sliding doors in RAL 1018 - zinc yellow with centralcylinder lockVentilation openings in the doorsDN 75 ventilation connection for exhaust air extraction on roofWith inner fittings:- 2 x 4 compartment shelves, non-tilt, height adjustable at intervals of25 mm, max. load 70 kg / shelf
- 2 base troughs (BW) made of powder-coated steel sheet, 3 mm, inRAL 7035 – light grey in accordance with § 19 WHG, with Ü-signaccording to regulations for base troughs made of steel sheet
.
.
.
.
.
Model CHS 950 VS
External dimensions W x D x H in mm 950 x 500 x 1950
Internal dimensions W x D x H in mm 862 x 467 x 1844
Doors 2
Collection volume in litres BW 1 x 30 / AW 2 x 20 /EW 1 x 20
Weight (kg) 80
Art.-No., outer body: RAL 7035 – light grey B80-6217-A
Accessories Art.-No.
Trough-shaped shelf RAL 7035 B80-2826-A
PE-insert for base trough,for storing aggressive media B80-2828-A
PE-insert for trough-shaped shelf,for storing aggressive media B80-2830-A
Model CHS 1800External dimensions W x D x H in mm 1800 x 500 x 1950
Internal dimensions W x D x H in mm 1710 x 430 x 1844
Collection volume in litres BW 2 x 30
Sliding doors 2
Weight (kg) 148
Art.-No., outer body: RAL 7035 – light grey, doors RAL 1018 zinc yellow B80-6219-A
Accessory Art.-No.
Shelf RAL 7035 – light grey B80-2878-A
Chemicals and
poisons cabinets
CHEMICALS AND POISONS CABINETS as per TRGS 514 / TRGS 526 / BGR 120
7
CHEMICAL CABINETS FOR CANISTER
Chemicals and
poisons cabinetsFor storing / filling of canisters containing harmful,
water-endangering, toxic and very toxic liquids
Single-wall body made of high-quality powder-coated steel
sheet in RAL 7035 – light grey
Door(s) with central cylinder lock
Ventilation openings in the door(s)
Trough-shaped shelves
- non-tilt, max. load 70 kg / shelf
- height adjustable at intervals of 25 mm
DN 75 ventilation connection for exhaust air extraction
on cabinet roof
Including inner fittigs:
CHS-KAN 950 / CHS-KAN 950 GL:
- 3 trough-shaped shelves (EW),powder-coated steel sheet
in RAL 7035 – light grey with perforated cover plate;
Trough-shaped shelves (EW) with refilling device (either
for 5 x 5 litre or 4 x 10 litre or 3 x 20 litre canister
suitable) designed
- Base trough (BW), made of powder-coated steel sheet,
3 mm, in RAL 7035 – light grey, with perforated cover
plate, in accordance with § 19 WHG, with Ü-sign acc.
to regulations for base troughs made of steel sheet
.
.
.
.
.
.
Accessory Art.-No.
Canister set made of plastic:- 5 pcs. 5-litre canister,- 4 pcs. 10-litre canister,- 3 pcs. 20-litre canister,Natural colour with UN-X1.9-approvalcomplete with tap B80-6238-A
CHS-KAN 950, Art.-No. B80-6233-A, with optional canister set
CHS-KAN 950 GL, Art.-No. B80-6234-A,with optional canister set and safe compartment
Model CHS-KAN 950 CHS-KAN 950 GL
External dimensions W x D x H in mm 950 x 500 x 1950 950 x 500 x 1950
Internal dimensions W x D x H in mm 862 x 467 x 1844 862 x 467 x 1844
Collection volume in litres BW 1 x 30 / EW 3 x 20 BW 1 x 30 / EW 3 x 20
Wing doors 2 2 (acrylic glass)
Weight (kg) 110 110
Art.-No., outer body:RAL 7035 - light grey B80-6233-A B80-6234-A
Accessory Art-No. Art.-No.
Trough-shaped shelf, steel sheetRAL 7035 with perforated cover plate B80-6235-A B80-6235-A
PE-insert for base trough,for storing of aggressive media B80-2828-A B80-2828-A
PE-insert for trough-shaped shelf,for storing of aggressive media B80-6237-A B80-6237-A
Safe compartment B80-6243-A B80-6243-ACHS-KAN 950, Art.-No. B80-6233-A, with optional canister set
8
CHEMICALS AND POISONS CABINETS as per TRGS 514 / TRGS 526 / BGR 120
For storage of harmful, water-endangering, toxic and very toxic liquids
CHS-1FAS 950 GL, Art.-No. B80-6242-A
CHEMICALS AND POISONS CABINETS FOR ONE 60-LITRE DRUM / CHS-1FAS 950
Model CHS-1FAS 950 CHS-1FAS 950 GL
External dimensions W x D x H in mm 950 x 500 x 1950 950 x 500 x 1950
Internal dimensions W x D x H in mm 862 x 467 x 1844 862 x 467 x 1844
Collection volume in litres BW 1 x 65 BW 1 x 65
Wing doors 2 2 (acrylic glass)
Capacity 1 x 60-litre drum + small containers 1 x 60-litre drum + small containers
Weight (kg) 105 105
Art.-No., outer body:RAL 7035 - light grey B80-6241-A B80-6242-A
Single-wall body made of high-quality powder-coated steel sheet
in RAL 7035 – light grey
Door(s) with central cylinder lock
Ventilation openings in the doors
Shelves
- mounted, max. load 20 kg / shelf
- height interval 275 mm
DN 75 ventilation connection for exhaust air extraction on
cabinet roof
Including inner fittings:
- with four shelves (EB), powder-coated steel sheet, in
RAL 7035 – light grey
- Base trough (BW), collection volume 65 litres, with grid as
storage level powder-coated steel sheet, 3 mm, in
RAL 7035 – light grey, in accordance with § 19 WHG,
with Ü-sign acc. to regulations for base troughs made of
steel sheet
- Rail to fix accessories
.
.
.
.
.
.
CHS-1FAS 950, Art.-No. B80-6241-A
CHS-1FAS 950, Art.-No. B80-6241-A
Accessory Art.-No. Art.-No.
PE-insert for base trough,for storing of aggressive media B80-6240-A B80-6240-A
Chemicals and
poisons cabinets
9
CHEMICALS AND POISONS CABINETS as per TRGS 514 / TRGS 526 / BGR 120
For storage of harmful, water-endangering, toxic and very toxic liquids
CHS-2FAS 950, Art.-No. B80-6225-A
CHEMICALS AND POISONS CABINETS FOR TWO 60-LITRE DRUMS / CHS-2FAS 950
Single-wall body made of high-quality powder-coated steel sheet in
RAL 7035 – light grey
Doors with central cylinder lock
Ventilation openings in the doors
Trough-shaped shelf
- non-tilt, max. load 70 kg / shelf
- height adjustable at intervals of 25 mm
DN 75 ventilation connection for exhaust air extraction on
cabinet roof
Including interior fittings:
- 1 trough-shaped shelf (EW), powder-coated steel sheet in
RAL 7035 – light grey
- Base trough (BW), collection volume 65 litres, with grid as storing
level made of powder-coated sheet steel, 3 mm, in RAL 7035 – light
grey, in accordance with § 19 WHG, with Ü-sign acc. to regulation
for base troughs made of steel sheet
.
.
.
.
.
.
CHS-2FAS 950 GL, Art.-No. B80-6239-A,with optional safe compartment
CHS-2FAS 950 GL, Art.-No. B80-6239-A,with additional trough-shaped shelf
Model CHS-2FAS 950 CHS-2FAS 950 GL
External dimensions W x D x H in mm 950 x 500 x 1950 950 x 500 x 1950
Internal dimensions W x D x H in mm 862 x 467 x 1844 862 x 467 x 1844
Collection volume in litres BW 1 x 65 / EW 1 x 20 BW 1 x 65 / EW 1 x 20
Wing doors 2 2 (acrylic glass)
Capacity 2 x 60-litre drum + small containers 2 x 60-litre drum + small containers
Weight (kg) 100 100
Art.-No., outer body:RAL 7035 - light grey B80-6225-A B80-6239-A
Accessory Art.-No. Art.-No.Trough-shaped shelf, steel sheet RAL 7035 B80-2826-A B80-2826-A
PE-insert for base trough,for storage of aggressive media B80-6240-A B80-6240-A
PE-insert for trough-shaped shelf,for storage of aggressive media B80-2830-A B80-2830-A
Safe compartment B80-6243-A B80-6243-A
Chemicals and
poisons cabinets
CHEMICALS AND POISONS CABINETS as per TRGS 514 / TRGS 526 / BGR 120
10
For storage of harmful, water-endangering, toxic and very toxic
liquids
CHS-1FAS 950-660, Art.-No. B80-6245-A
CHEMICALS AND POISONS CABINETS FOR ONE 200-LITRE DRUM / CHS-1FAS 950-660
Model CHS-1FAS 950-660
External dimensions W x D x H in mm 950 x 660 x 1950
Internal dimensions W x D x H in mm 862 x 618 x 1500*
Collection volume in litres BW 1 x 220 / EW 1 x 20
Wing doors 2
Capacity 1 x 200-litre drum + small containers
Weight (kg) 135
Art.-No., outer body: RAL 7035 - light grey,doors: RAL 5015 - sky blue B80-6245-A
Single-wall body made of high-quality powder-coated steel sheet
in RAL 7035 – light grey / doors RAL 5015 - sky blue
Doors with central cylinder lock
Ventilation openings in the doors
Trough-shaped shelf
- non-tilt, max. load 70 kg / shelf
- height adjustable at intervals of 25 mm
DN 75 ventilation connection for exhaust air extraction on
cabinet roof
Including inner fittings:
- Trough-shaped shelf (EW), powder-coated steel sheet
in RAL 7035 – light grey
- Base trough (BW), collection volume 200 litres, with grid as
storage level powder-coated steel sheet, 3 mm, in
RAL 7035 – light grey, in accordance with § 19 WHG,
with Ü-sign acc. to regulations for base troughs made of
steel sheet
.
.
.
.
.
.
CHS-1FAS 950-660, Art.-No. B80-6245-A
CHS-1FAS 950-660, Art.-No. B80-6245-A
Accessory Art.-No.
PE-insert for base trough,for storing of aggressive media B80-6247-A
* height at border edge of grid
Chemicals and
poisons cabinets
CHEMICALS AND POISONS CABINETS as per TRGS 514 / TRGS 526 / BGR 120
For storage of harmful, water-endangering, toxic and very toxic
liquids
CHS-2FAS 1500, Art.-No. B80-6246-A
CHEMICALS AND POISONS CABINETS FOR TWO 200-LITRE DRUMS / CHS-2FAS 1500
Single-wall body made of high-quality powder-coated steel
sheet in RAL 7035 – light grey / doors RAL 5015 - sky blue
Doors with central cylinder lock
Ventilation openings in the doors
Trough-shaped shelf
- non-tilt, max. load 50 kg / shelf
- height adjustable at intervals of 25 mm
DN 75 ventilation connection for exhaust air extraction on
cabinet roof
Including interior fittings:
- Trough-shaped shelf (EW), powder-coated steel sheet
in RAL 7035 – light grey
- Base trough (BW), collection volume 220 litres, with grid as
storing level made of powder-coated sheet steel, 3 mm, in
RAL 7035 – light grey, in accordance with § 19 WHG,
with Ü-sign acc. to regulation for base troughs made
of steel sheet
.
.
.
.
.
.
CHS-2FAS 1500, Art.-No. B80-6246-A
CHS-2FAS 1500, Art.-No. B80-6246-A
11
Model CHS-2FAS 1500
External dimensions W x D x H in mm 1500 x 660 x 1950
Internal dimensions W x D x H in mm 1475 x 618 x 1694*
Collection volume in litres BW 1 x 220 / EW 1 x 30
Wing doors 2
Capacity 2 x 200-litre drum + small containers
Weight (kg) 145
Art.-No., outer body: RAL 7035 - light grey,doors: RAL 5015 - sky blue B80-6246-A
Accessory Art.-No.
PE-insert for base trough,for storing of aggressive media B80-6248-A
* height at border edge of grid
Chemicals and
poisons cabinets
CHEMICALS AND POISONS CABINETS as per TRGS 514 / TRGS 526 / BGR 120
12
Chemicals and
poisons cabinets For storage of harmful, water-endangering, toxic and very toxic liquids
CHS-APO 600, Art.-No. B80-6226-A
CHS-APO 2400,Art.-No. B80-6229-A
CHEMICAL CABINETS WITH DISPENSING CHEMIST’S SHELVING
Single-wall body made of high-quality powder-coated steel sheet in
RAL 7035 – light grey
Door(s) with central cylinder lock
Ventilation via openings near the floor
Trough-shaped shelves, non-tilt
- max. load 20 kg / shelf,
- height adjustable at intervals of 25 mm
DN 75 ventilation connection for exhaust air extraction on cabinet roof
.
.
.
.
.
Including inner fittings,
per pull-out door:
- 4 trough-shaped shelves (EW), powder-
coated steel sheet in RAL 7035 - light grey
- Base trough (BW), powder-coated steel
sheet in RAL 7035 - light grey
.
Model CHS-APO 600 CHS-APO 1200 CHS-APO 1800 CHS-APO 2400
External dimensions W x D x H in mm 600 x 500 x 1950 1200 x 500 x 1950 1800 x 500 x 1950 2400 x 500 x 1950
Internal dimensions W x D x H in mm 475 x 435 x 1800 2 x 475 x 435 x 1800 3 x 475 x 435 x 1800 4 x 475 x 435 x 1800
Collection volume in litres BW 1 x 20 / EW 4 x 10 BW 2 x 20 / EW 8 x 10 BW 3 x 20 / EW 12 x 10 BW 4 x 20 / EW 16 x 10
Pull-out door(s) 1 2 3 4
Weight (kg) 85 170 255 340
Art.-No., outer body:RAL 7035 - light grey B80-6226-A B80-6227-A B80-6228-A B80-6229-A
Accessory Art.-No. Art.-No. Art.-No. Art.-No.Trough-shaped shelf RAL 7035 B80-6230-A B80-6230-A B80-6230-A B80-6230-A
PE-insert for base trough,for storing aggressive media B80-6231-A B80-6231-A B80-6231-A B80-6231-A
PE-insert for trough shaped shelf,for storing of aggressive media B80-6232-A B80-6232-A B80-6232-A B80-6232-A
Non-slip mat for troughs B80-6244-A B80-6244-A B80-6244-A B80-6244-A
Acid and
alkali cabinets
CONTENTS ACID AND ALKALI CABINETS
13
Acid and alkali cabinets ...
Acid and alkali fume cupboard underbench cabinets . . . . . . . . . . . Page 14
Acid and alkali corner cabinets . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Page 14
Acid and alkali cabinets 1935 mm height
Width 600 mm. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Page 15
Acid and alkali cabinets 1935 mm height
Width 1200 mm. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Page 16/17
Acid and alkali cabinets 1935 mm height
made of PVC width 600 mm . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Page 18
Branded qu
ality
MADE by LA
CONT
NEW
SLS - FUME CUPBOARD UNDERBENCH CABINETS
ACID AND ALKALI CABINETS as per TRGS 526 / BGR 120
14
Acid and
alkali cabinets Model SLS-AUS 600 SLS-AUS 1100
External dimensionsW x D x H in mm 600 x 570 x 600 1100 x 570 x 600
Pull-out shelves 1 2
Usable inner shelf heightin mm 1 x 495 2 x 495
Door(s) 1 2
Weight (kg) 35 65
Door hinge
Art.-No., outer body: left B80-2859-ARAL 7035 – light grey right B80-2860-A
Accessories Art.-No. Art.-No.
Extra pull-out shelf as 2nd storage level B80-2824-A B80-2868-A
Plinth height 35 mm B80-2825-A B80-2869-A
With inner fittings:
1 (SLS-AUS 600) pull-out shelf, or 2 (SLS-AUS 1100) pull-out
shelves, with end stop, arranged side by side
•Max. load 20 kg / shelf
• Front edge of shelves in
attractive solid wood
design
• PE-trough (collection
volume 20 litres) on shelf
secured against
slipping - easy to
remove
.
For storage of acids and alkalis
Body made of HPL-coated sheets - particularly impact, scratch
and abrasion proof
Colour RAL 7035 - light grey
Interior/inner fittings completely made from corrosion-proof
components
Doors with separate cylinder locks
Marked with warning symbols W03 / W04
Ventilation via grid in rear panel of cabinet and DN 75
ventilation connection for exhaust air extraction in rear panel
.
.
.
.
.
.
SLS 1100, Art.-No. B80-2823-A
B80-2823-A
SLS-AUS 600, Art.-No. B80-2859-A
SLS – CORNER CABINETS
With inner fittings:
Fully rotating turntable with 2 (SLS-ECK 1)
or. 4 (SLS-ECK 2) PE troughs (ø 695 mm)
• max. load 20 kg per trough
• collection volume 11 litres per trough
.
Description as for SLS fume cupboard underbench cabinets .
SLS-ECK 2, Art.-No. B80-2862-A
Model SLS-ECK 1 SLS-ECK 2
External dimensions W x D x H in mm 900 x 900 x 800 900 x 900 x 1480
PE-trough 2 4
Usable inner height in mm 1 x 300 / 1 x 260 2 x 280 / 2 x 245
Door(s) 1 (DIN left) 2 (DIN left)
Weight (kg) 75 120
Art.-No., outer bodyRAL 7035 – light grey B80-2861-A B80-2862-A
SLS-ECK 1, Art.-No. B80-2861-A
15
Model SLS 600/4 SLS 600/6 SLS 600 GL/4 SLS 600 GL/6 SLS 600 GL/3-SF3
External dimensionsW x D x H in mm 600 x 600 x 1935 600 x 600 x 1935 600 x 600 x 1935 600 x 600 x 1935 600 x 600 x 1935
Pull-out shelves 2 x 2 2 x 3 2 x 2 2 x 3 3
Usable inner shelf heightin mm 4 x 420 4 x 275 / 2 x 248 4 x 420 4 x 275 / 2 x 248 2 x 275 / 1 x 248
Drawers - - - - 3
Usable inner drawer heightin mm - - - - 1 x 255 / 1 x 275 / 1 x 250
Doors 2 2 2 (acrylic glass doors) 2 (acrylic glass doors) 1 (acrylic glass door)
Weight (kg) 110 116 110 116 116
Door hinge
Art.-No., outer body: left B80-3010-D B80-3012-D B80-3018-D B80-3014-D B80-3020-DRAL 7035 – light grey right B80-3011-D B80-3013-D B80-3019-D B80-3015-D B80-3021-D
Accessory Art.-No.
Pull-out shelf B80-2824-A
ACID AND ALKALI CABINETS as per TRGS 526 / BGR 120
For storage of acids and alkalis
SLS 600/4, Art.-No. B80-3010-D
SLS 600 GL/3-SF3, Art.-No. B80-3020-D Combination SLS 600 GL/6, Art.-No. B80-3014-D
SLS - CABINETS - WIDTH 600 MM
Body made of HPL-coated sheets - particularly impact, scratch and abrasion proof
Colour RAL 7035 - light grey
Interior/inner fittings completely made from corrosion-proof components
Doors with separate cylinder locks
Marked with warning symbols W03 / W04
Levelling feet for installing cabinet horizontally
With central horizontal division for storage of acids and alkalis in separate compartments
Ventilation via grid in rear panel of cabinet and DN 75 ventilation connection for exhaust
air extraction on cabinet roof
With inner fittings:
Pull-out shelves with end stop•max. load 20 kg / shelf• Front edge of shelves in attractivesolid wood design
• PE-trough (collection volume 20 litres)on shelf secured against slipping –easy to remove
•Model SLS 600 GL/3-SF3 additionallywith full extent pull-out drawerswith built-in PE-troughs (collectionvolume 20 litres)
.
.
.
.
.
.
.
.
.
Acid and
alkali cabinets
16
SLS - CABINETS WIDTH 1200 MM
Extraction fans please seepage 54 !
1 2
3
4
5
6
7
1
2
3
4
SLS 600/4, Art.-No. B80-3010-D (p.15)
SLS 600 GL/3-SF3, Art.-No. B80-3020-D (p.15)
SLS 1200/6-SF6, Art.-No. B80-3025-D (p.17)
SLS 1200 GL/12, Art.-No. B80-3023-D (p.16)
SLS-ECK 2, Art.-No. B80-2862-A (p.14)
SLS 1200 GL/6-SF6, Art.-No. B80-3027-D (p.17)
SLS 1200/12, Art.-No. B80-3016-D (p.16)
5
6
7
Acid and
alkali cabinets
ACID AND ALKALI CABINETS as per TRGS 526 / BGR 120
For storage of acids and alkalis
SLS 1200/12, Art.-No. B80-3016-D
SLS 1200 GL/12, Art.-No. B80-3023-D
Model SLS 1200/8 SLS 1200/12 SLS 1200 GL/8 SLS 1200 GL/12External dimensionsW x D x H in mm 1200 x 600 x 1935 1200 x 600 x 1935 1200 x 600 x 1935 1200 x 600 x 1935
Pull-out shelves 4 x 2 4 x 3 4 x 2 4 x 3
Usable inner shelf heightin mm 8 x 420 8 x 275 / 4 x 248 8 x 420 8 x 275 / 4 x 248
Doors 4 4 4 (acrylic glass doors) 4 (acrylic glass doors)
Weight (kg) 220 232 220 232
Art.-No., outer body:RAL 7035 – light grey B80-3017-D B80-3016-D B80-3022-D B80-3023-D
Accessory Art.-No.
Pull-out shelf B80-2870-A
Body made of HPL-coated sheets - particularly impact, scratch and abrasion proof
Colour RAL 7035 - light grey
Interior/inner fittings completely made from corrosion-proof components
Doors with separate cylinder locks
Marked with warning symbols W03 / W04
Levelling feet for installing cabinet horizontally
With central horizontal and vertical divisions for storage of acids and alkalis in
4 separate compartments
Model SLS 1200 GL with acrylic glass doors
Ventilation via grid in rear panel of cabinet and DN 75 ventilation connection
for exhaust air extraction on cabinet roof
With inner fittings:
Pull-out shelves (to full extent) with end stop
•Max. load 20 kg per shelf
• Front edge of shelves in attractive solid wood design
• PE-trough (collection volume 20 litres) on shelf secured against
slipping - easy to remove
.
.
.
.
.
.
.
.
.
.
ACID AND ALKALI CABINETS as per TRGS 526 / BGR 120
17
SLS - CABINETS WIDTH 1200 MM
Model SLS 1200/4-SF 6 SLS 1200/6-SF6 SLS 1200 GL/4-SF6 SLS 1200 GL/6-SF6External dimensionsW x D x H in mm 1200 x 600 x 1935 1200 x 600 x 1935 1200 x 600 x 1935 1200 x 600 x 1935
Pull-out shelves 2 x 2 2 x 3 2 x 2 2 x 3
Usable inner shelf height in mm 4 x 420 4 x 275 / 2 x 248 4 x 420 4 x 275 / 2 x 248
Drawers 6 6 6 6
Usable inner drawer heightin mm 2 x 255 / 2 x 275 / 2 x 250 2 x 255 / 2 x 275 / 2 x 250 2 x 255 / 2 x 275 / 2 x 250 2 x 255 / 2 x 275 / 2 x 250
Doors 2 2 2 (acrylic glass doors) 2 (acrylic glass doors)
Weight (kg) 220 232 220 232
Art.-No., outer body:RAL 7035 – light grey B80-3024-D B80-3025-D B80-3026-D B80-3027-D
For storage of acids and alkalis
Body made of HPL-coated sheets - particularly impact, scratch and abrasion
proof
Colour RAL 7035 - light grey
Interior/inner fittings completely made from corrosion-proof components
Doors with separate cylinder locks, 6 lockable drawers in lower part
Marked with warning symbols W03 / W04
Levelling feet for installing cabinet horizontally
With central horizontal and vertical divisions for storage of acids and alkalis in
4 separate compartments
Model SLS 1200 GL with acrylic glass doors
Ventilation via grid in rear panel of cabinet and DN 75 ventilation connection
for exhaust air extraction on cabinet roof
With inner fittings:
Pull-out shelves (to full extent) with end stop
•Max. load 20 kg per shelf
• Front edge of shelves in attractive solid wood design
• PE-trough (collection volume 20 litres) on shelf secured against
slipping - easy to remove
Pull-out drawers (to full extent) with end stop
•Max. load 20 kg per drawer
• PE-trough (collection volume 20 litres) in drawer secured against
slipping - easy to remove
.
.
.
.
.
.
.
.
.
.
.
Pull-out drawer with end stop SLS 1200 GL/6-SF6,Art.-No. B80-3027-D
SLS 1200/6-SF6, Art.-No. B80-3025-D
SLS 1200 GL/6-SF6, Art.-No. B80-3027-D
Accessory Art.-No.
Pull-out shelf B80-2870-A
Acid and
alkali cabinets
18
ACID AND ALKALI CABINETS as per TRGS 526 / BGR 120
For storage of acids and alkalis
SLS-P 600 GL/6,Art.-No. B80-3034-D
SLS-P 600 GL/6, Art.-No. B80-3034-D
SLS-P 600/4,Art.-No. B80-3028-D
SLS – CABINETS MADE FROM PVC - SLS-P 600
Model SLS-P 600/4 SLS-P 600/6 SLS-P 600 GL/4 SLS-P 600 GL/6
External dimensions W x D x H in mm 600 x 600 x 1935 600 x 600 x 1935 600 x 600 x 1935 600 x 600 x 1935
Pull-out shelves 2 x 2 2 x 3 2 x 2 2 x 3
Usable inner shelf heightin mm 4 x 420 4 x 275 / 2 x 248 4 x 420 4 x 275 / 2 x 248
Wing doors 2 2 2 (acrylic glass) 2 (acrylic glass)
Weight (kg) 83 88 80 85
Door hinge
Art.-No., left B80-3028-D B80-3030-D B80-3032-D B80-3034-D
outer body: white right B80-3029-D B80-3031-D B80-3033-D B80-3035-D
Accessory Art.-No.
additional pull-out shelf B80-3036-D
Body made of PVC-coated sheets – particularly impact, scratch and
abrasion proof
Colour: outer body white / blue edges
Inner body / inner fittings complete made from
corrosion-proof components
Doors with separate cylinder locks
Marked with warning symbols W03 / W04
Levelling feet for installing cabinet horizontally
With central horizontal division for storage of acids and alkalis in separate
compartments
Ventilation via grid in rear panel of cabinet
DN 75 ventilation connection for exhaust air extraction on cabinet roof
Including inner fittings:
Pull-out shelves with end stop•max. load 20 kg / shelf • PE-trough (collection volume 20 litres)on shelf secured against slipping - easyto remove
.
.
.
.
.
.
.
.
.
.
Acid and
alkali cabinets
Com
bicabinets
CONTENTS COMBI CABINETS
19
Combi cabinets ...
Chemicals and poisons cabinets
for small containers with safety box . . . . . . . . . . . . . . . . . . . . . . . . . Page 20
Chemicals and poisons cabinets
for 60-litres-drums with safety box . . . . . . . . . . . . . . . . . . . . . . . . . . Page 21
Hazardous substances cabinets as per EN 14470-1
Width 600 mm - KombiLAB. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Page 22
Hazardous substances cabinets as per EN 14470-1
Width 1200 mm - KombiLAB. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Page 23
PRACTICAL INFORMATION about
EN 14470-1 und TRbF 20-L . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Page 24/25
Safety cabinets
Branded quality Made by LACONT . . . . . . . . . . . . . . . . . . . . . . . . . . Page 26
Branded qu
ality
MADE by LA
CONT
NEW
NEW
CHEMICAL CABINETS FOR SMALL CONTAINERS WITH SAFETY BOX
Extraction fans please seepage 54 !
CHEMICALS AND POISONS CABINETS as per TRGS 514 / TRGS 526 / BGR 120
20
Com
bicabinets
For storage of harmful, water-endangering, toxic and
very toxic liquids also for storage of flammable liquids
as per EN 14470-1 / TRbF 20-L
CHS 950 / SiB 30, Art.-No. B80-6207-A
CHS 950 GL / SiB 30,Art.-No. B80-6214-A
Single-wall body made of high-quality powder-coated
steel sheet in RAL 7035 – light grey
Door(s) with central cylinder lock
Ventilation openings in the door(s)
Trough-shaped shelves
- non-tilt, max. load 70 kg / shelf
- height adjustable at intervals of 25 mm
Whole construction tested and approved by a
recognized materials testing institute as per EN 14470-1
(Type 30 / Type 60) with a fire resistance capability of
>30 and >60 minutes for the small safety cabinet
Small safety cabinet with separate cylinder lock
Central DN 75 ventilation connection for exhaust air
extraction of both cabinets on roof
With inner fittings:
CHS 950 / SiB 30 / CHS 950 / SiB 60:
- Made of powder-coated steel sheet in
RAL 7035 – light grey
- Model GL with acrylic glass doors
Chemical cabinet:
- 3 trough-shaped shelves (EW)
Small safety cabinet as per EN 14470-1
- Base trough (BW) collection volume 11 litres
- Useful dimensions W x D x H in mm = 750 x 325 x 440
- Automatic door closing mechanism
.
.
.
.
.
.
.
.
Model CHS 950 / SiB 30 CHS 950 / SiB 60 CHS 950 GL / SiB 30 CHS 950 GL / SiB 60External dimensions W x D x H in mm 950 x 500 x 1950 950 x 500 x 1950 950 x 500 x 1950 950 x 500 x 1950
Internal dimensions W x D x H in mm 862 x 467 x 1240 862 x 467 x 1240 862 x 467 x 1240 862 x 467 x 1240
Collection volume in litres (EW/BW) 3 x 20 / 1 x 11 3 x 20 / 1 x 11 3 x 20 / 1 x 11 3 x 20 / 1 x 11
Doors 2 2 2 (acrylic glass doors) 2 (acrylic glass doors)
Gewicht (kg) 145 150 145 150
Art.-No., outer body:RAL 7035 – light grey B80-6207-A B80-6208-A B80-6214-A B80-6215-A
Accessories Art.-No. Art.-No. Art.-No. Art.-No.Trough-shaped shelf,steel sheet RAL 7035 B80-2826-A B80-2826-A B80-2826-A B80-2826-A
PE-insert for trough-shaped shelffor storing aggressive media B80-2830-A B80-2830-A B80-2830-A B80-2830-A
Perforated trough-cover for collectiontrough of small safety cabinet B80-6213-A B80-6213-A B80-6213-A B80-6213-A
21
CHEMICALS AND POISONS CABINETS as per TRGS 514 / TRGS 526 / BGR 120
For storage of harmful, water-endangering, toxic and
very toxic liquids also for storage of flammable liquids
as per EN 14470-1 / TRbF 20-L
CHS 950-2FAS / SiB 30, Art.-No. B80-6249-A
CHS 950-2FAS GL / SiB 30,Art.-No. B80-6251-A
CHEMICALS CABINETS FOR 60-LITRE DRUMS WITH SAFETY BOX
Model CHS 950-2FAS / SiB 30 CHS 950-2FAS / SiB 60 CHS 950-2FAS GL / SiB 30 CHS 950-2FAS GL / SiB 60External dimensions W x D x H in mm 950 x 500 x 1950 950 x 500 x 1950 950 x 500 x 1950 950 x 500 x 1950
Internal dimensions W x D x H in mm 862 x 467 x 1240 862 x 467 x 1240 862 x 467 x 1240 862 x 467 x 1240
Collection volume in litres (EW/BW) 1 x 20 / 1 x 65 1 x 20 / 1 x 65 1 x 20 / 1 x 65 1 x 20 / 1 x 65
Doors 2 2 2 (acrylic glass doors) 2 (acrylic glass doors)
Weight (kg) 145 150 145 150
Art.-No., outer body:RAL 7035 – light grey B80-6249-A B80-6250-A B80-6251-A B80-6252-A
Single-wall body made of high-quality powder-coated steel sheet
in RAL 7035 – light grey
Door(s) with central cylinder lock
Ventilation openings in the door(s)
Trough-shaped shelves
- non-tilt, max. load 70 kg / shelf
- height adjustable at intervals of 25 mm
Whole construction tested and approved by a recognized
materials testing institute as per EN 14470-1
(Type 30 / Type 60) with a fire resistance capability of
>30 and >60 minutes for the small safety cabinet
Small safety cabinet with separate cylinder lock
Central DN 75 ventilation connection for exhaust air extraction
of both cabinets on roof
.
.
.
.
.
.
.
With inner fittings: CHS 950-2FAS / SiB 30 / CHS 950-2FAS / SiB 60:- Made of powder-coated steel sheet inRAL 7035 – light grey
- Model GL with acrylic glass doorsChemical cabinet- one trough-shaped shelf (EW)- Base trough(BW), collection volume 65 litres, with grid, made of powder-coated steel sheet, 3 mm, inRAL 7035 – light grey in accordance with § 19 WHG, with Ü-sign according to regulations for base troughsmade of steel sheet
Small safety cabinet as per EN 14470-1- Base trough (BW) collection volume 11 litres- Useful dimensions W x D x H in mm = 750 x 325 x 440- Automatic door closing mechanism
.
Accessories Art.-No. Art.-No. Art.-No. Art.-No.
Trough-shaped shelf, steel sheet RAL 7035 B80-2826-A B80-2826-A B80-2826-A B80-2826-A
PE-insert for trough-shaped shelffor storing aggressive media B80-2830-A B80-2830-A B80-2830-A B80-2830-A
Perforated trough-cover for collectiontrough of small safety cabinets B80-6213-A B80-6213-A B80-6213-A B80-6213-A
Com
bicabinets
SIS TYPE 90 / 600 KL - KOMBILAB
2
2
1
1
HAZARDOUS SUBSTANCES CABINETS as per EN 14470-1 (TYPE 90)
22
Com
bicabinets
Approved for the storage of flammable liquids at the workplace as per
EN 14470-1 (Type 90) and TRbF 20 - L, toxic and very toxic substances,
acids and alkalis. Ideal combination for storage of different hazardous
substances in a very small space.
Safety cabinet
SiS Type 90 / 600 KL1, Art.-No. B80-2887-A
SiS Type 90 / 600 KL2, Art.-No. B80-2889-A
Model SiS Type 90 / 600 KL1 SiS Type 90 / 600 KL2
Outer dimensions W x D x H in mm 595 x 600 x 1935 595 x 600 x 1935
Wing doors 2 2
Poison compartment Shelf 1 -
Rotating turntable - 1
Weight (kg) 245 250
Door hinge Inner fittings
Art.-No., outer body: left steel sheet B80-2886-A B80-2888-A
RAL 7035 - light grey right steel sheet B80-2887-A B80-2889-A
Whole construction tested and approved by a recognized materials testinginstitute as per EN 14470-1 (type 90) with a fire resistance of >90 minutes Insulation according to DIN 4102 Outer body powder-coated steel sheet, RAL 7035 – light grey Inner body made of HPL coated sheets - RAL 7035 Stainless steel base plateShelf height adjustable at intervals of 64 mm Ventilation via central connection DN 75 for exhaust air extractionon cabinet roof Operation complies with TRbF 20-L (approved even with exhaust airconnection)) Grounding connection in accordance with BGR 132 (avoidance ofsources of ignition) Marking according to EN 14470-1 / TRbF 20, annex L / ISO 3864 Levelling feet for installing cabinet horizontally Doors with cylinder lock
With inner fittings:
Storage cabinet for flammable liquids type 90
as per EN 14470-1
- 1 x base trough (collection volume 22 litres)
- 1 x perforated cover plate as 1st storing level
- 2 x shelf
- With automatic thermal closing mechanism if
fire occurs
• Door after temperature increase to ≤ 50°C and
• Inlet and outlet channels after temperature
increase to 70°C (±10°C)
Poison compartment with acrylic glass door
- Dividing shelf
or
- Fully rotating turntable
.
.
.
.
.
.
.
.
.
.
.
.
1
1
2
SIS TYPE 90 / 1200 KL - KOMBILAB
Extraction fans please see page 54 !
2
2
3
3
1
1
HAZARDOUS SUBSTANCES CABINETS as per EN 14470-1 (TYPE 90)
23
Com
bicabinets
Approved for the storage of flammable liquids at the workplace
as per EN 14470-1 (Type 90) and TRbF 20 - L, toxic and very toxic
substances, acids and alkalis. Ideal combination for storage of
different hazardous substances in a very small space.
Safety cabinet
SiS Type 90 / 1200 KL1, Art.-No. B80-2820-A
SiS Type 90 / 1200 KL3 GL, Art.-No. B80-2822-A
Model Type 90 / 1200 KL1 Type 90 / 1200 KL2 Type 90 / 1200 KL3 GL
External dimensions* W x D x H in mm 1195 x 600 x 1935 1195 x 600 x 1935 1195 x 600 x 1935
Doors 4 4 4
Design of acid/alkali cabinet pull-out shelves 4 6 6
usable inner height mm 4 x 420 4 x 275 / 2 x 248 4 x 275 / 2 x 248
Weight (kg) 325 335 340
Material inner fittings
Art.-No., outer body: RAL 7035 - light grey steel sheet B80-2820-A B80-2821-A B80-2822-A
Whole construction tested and approved by a recognized materials testing
institute as per EN 14470-1 (Type 90) with a fire resistance >90 minutes
Insulation according to DIN 4102
Outer body powder-coated steel sheet in RAL 7035 - light grey
Inner body made of HPL-coated sheets - RAL 7035
Stainless steel base plate
Shelf height adjustable at intervals of 64 mm
DN 75 ventilation connection for exhaust air extraction on the cabinet roof
Operation complies with TRbF 20-L (approved even without exhaust air
connection!)
Grounding connection in accordance with BGR 132 (avoidance of sources
of ignition)
Markings according to EN 14470-1 / TRbF 20, Annex L / ISO 3864
Levelling feet for installing cabinet horizontally
Doors with cylinder lock
Incl. installation accessories, screen and assembly instructions
With inner fittings:
*) plus cover panel: height 110 mm
Storage cabinet for flammable liquids type 90 as per
EN 14470-1
- 1 x base trough (collection volume 22 litres)
- 1 x perforated trough cover as 1st storing level
- 2 x shelves
- Automatic thermal closing mechanism if fire occurs
• Door after temperature increase to ≤ 50°C and
• Inlet and outlet channels after temperature increase to 70°C (±10°C)
Storage cabinet for acids and alkalis
- 2 x 2 or 2 x 3 pull-out trough-shaped shelves
made of PE, white
Poison compartment with acrylic glass door
- Dividing shelf
.
.
.
.
.
.
.
.
.
.
.
.
.
1
1
2
3
24
Fig.: SiS Type 30 / 1200 (≥ 30 minutes) for export (type-tested)
PRACTICAL INFORMATION
Development
and design
Testing by an independent
materials testing institute
Approval /
Test certificate
After European Standard EN 14470-1 came into force in 2004
there were changes affecting both the manufacturers and users
of safety cabinets, which for the first time in the history of safety
were implemented throughout EUROPE:
What has changed since the introduction of EN 14470-1
(safety cabinets for flammable liquids)?
The classification of the fire resistance capability was
defined for 4 types:
Type 15 = ≥ 15 minutes
Type 30 = ≥ 30 minutes
Type 60 = ≥ 60 minutes
Type 90 = ≥ 90 minutes
However, as Type 15 safety cabinets are not approved for use
in Germany at all, and the use of Type 30 and Type 60 safety
cabinets is subject to limitations (TRbF 20 Annex L), safety
cabinets with a fire resistance capability ≥ 90 minutes
(Type 90) are confirmed as being the state of the art in
Germany.
In contrast, in many other European countries the lack of
legislation covering safety cabinets has meant that the use
of the other type classes is permitted.
This is why we have safety cabinets from the lower type classes
in our supply range (e.g. Type 30 = ≥ 30 minutes); however,
these are exclusively intended for export.
.
The construction and testing of safety cabinets:.
Type-testing of the whole safety cabinet construction
in the fire chamber of an independent materials
testing institute (flaming) according to test conditions
that are uniform throughout Europe.
Dimensional variations without comparative testing
are limited to a reduction in the height and width of
max. 100 mm and a reduction in the depth of
max. 150 mm.
u
u
Protective aims:.
Adequate escape time for employees in the
workroom.
Fire department personnel and rescue teams must
be given sufficient time to enter the workroom before
the hazardous substances stored in the safety cabinet
turn a small fire that can be extinguished into an
uncontrollable one.
u
u
PRACTICAL INFORMATION about EN 14470-1
25
PRACTICAL INFORMATION about TRbF 20-L
PRACTICAL INFORMATION
The operator of safety cabinets as per DIN 12 925 part 1 / EN 14470 part 1 is responsible for their proper use. The corresponding
requirements are covered in the German „Technical Rules for Flammable Liquids“ (TRbF) 20-L and represent the basic safety requirements
for operating safety cabinets for the storage of flammable liquids.
1. Fire resistance capability:
Safety cabinets within the meaning of the TRbF are particular devices with a fire resistance
capability of > 90 minutes (as per EN 14470-1) – technological state-of-the-art in Germany.
In the case of fire they ensure sufficient time for escape and rescue (requirement as per
EN 14470-1).
2. Installation and operation:
… to protect employees and third parties, in particular from fire and explosion hazards
3. Collection volume:
Each safety cabinet must be equipped with a base trough which can accommodate at least
10% of the total volume of all stored containers and/or 110% of the volume of the largest
stored container.
4. Self-closing doors:
Doors of safety cabinets as per EN 14470-1 are fundamentally self-closing.
All storeLAB safety cabinets are equipped with a hold-open device (doors remain open
during operation); this ensures safe operation, loading and removal. A thermal mechanism
automatically closes the doors at a max. room temperature of 50°C.
5. Maximum storage amounts:
The amount of flammable liquids that can be stored in safety cabinets is limited! The total of all the stored containers (within a fire
section) must not exceed the following maximum amounts:
• In breakable containers:
- 60 litres extremely flammable and highly flammable liquids (flashpoint below 21°C)
- 200 litres flammable liquids (flashpoint from 21°C to 55°C)
• In other containers:
- 450 litres extremely flammable and highly flammable liquids (flashpoint below 21°C)
- 3000 litres flammable liquids (flashpoint from 21°C to 55°C)
• The maximum storage amount for safety cabinets with a fire resistance capability (FWF) of less than 90 minutes is limited to
max. 300 litres! Of this amount the extremely flammable and highly flammable liquids must not exceed max. 200 litres!
6. Ventilation:
With forced ventilation:
• Safety cabinets must be operated so that the air inlet and outlet system is
constantly effective; the rate of air exchange with the cabinet doors closed
must be at least 10 times per hour.
• Ventilation must be effective immediately above the base trough of the cabinet.
• The ventilation system must discharge into the atmosphere at a non-hazardous
location.
• Air inlet and outlet opening must be automatically sealed at a max. temperature
of 70°C (+/- 10°C).
Without forced ventilation:
• Avoidance of electrostatic charges – the cabinet must be grounded.
• The area of 2.5 m around the safety cabinet and up to a height of 0.5 m above
floor level is to be regarded as a Zone 2 explosion-endangered area.
26
Development + Design
Test procedure
Production
The use of modern 3D design programmes
Burning chamber of an independenttest institute
Modern, newly designed production facilities
Underbench cabinet type 90undergoing flame test
Test certificates and documents for approval
PRODUCTION SAFETY CABINETS – EVERYTHING FROM SINGLE SOURCE
Hazardous substances
cabinets (Type 30)
CONTENTS HAZARDOUS SUBSTANCES CABINETS (TYPE 30)
Hazardous substances cabinetsas per EN 14470-1 (Type 30) ... Brand
ed quality
MADE by LA
CONT
27
Hazardous substances cabinets as per EN 14470-1 (Type 30)
Width 600 mm + underbench cabinet AUS Type 30 / 1100 FT. . . . . . . Page 28
Hazardous substances cabinets as per EN 14470-1 (Type 30)
Width 1200 mm . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Page 29
Hazardous substances cabinets as per EN 14470-1 (Type 30)
Width 1200 mm - KombiLAB . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Page 30
Hazardous substances
cabinets (Type 30)
HAZARDOUS SUBSTANCES CABINETS as per EN 14470-1 (TYPE 30)
28
Whole construction tested and approved by a recognized materials testing institute
as per EN 14470-1 (Type 30) with a fire resistance >30 minutes
Body made of B1 material RAL 7035 - light grey, doors either in RAL 7035 – light grey
or RAL 1007 – similar daffodil yellow
Shelf height adjustable at intervals of 32 mm
Automatic thermal closing mechanism if fire occurs
• Door after temperature increase to ≤ 50°C and
• Inlet and outlet channels after temperature increase to 70°C (±10°C)
DN 80 ventilation connection for exhaust air extraction
Operation complies with TRbF 20-L (approved even without exhaust air connection!)
Grounding connection in accordance with BGR 132 (avoidance of sources of ignition)
Markings according to EN 14470-1 / TRbF 20, Annex L / ISO 3864
Levelling feet for installing cabinet horizontally
Door with cylinder lock
Door hinged right as standard
Approved for storage of flammable liquids at the workplace as per EN 14470-1
(Type 30) and TRbF 20 - L
With inner fittings:
1 x base trough (collection volume 23 litres)
1 x perforated trough cover as 1st level
With automatic thermal closing mechanism
SiS Type 30 / 600, Art.-No. B80-2603-A,door similar RAL 1007, incl. 3 shelves, base trough and perforated cover plate
SiS Type 30 / 600-1300, Art.-No. B80-2608-A,door similar RAL 1007, incl. 2 shelves, basetrough and perforated cover plate
AUS Type 30 / 1100 FT, Art.-No. B80-2602-A,incl. socle Art.-No. B80-2869-A
Accessory Material Art.-No. Art.-No. Art.-No.Shelf steel sheet B80-2611-A B80-2611-A -
Socle height 35 mm B1 - - B80-2869-A
.
.
.
.
.
.
.
.
.
.
.
.
.
.
SIS TYPE 30 / 600 and AUS TYPE 30 / 1100 FT
Model SiS Type 30 / 600 SiS Type 30 / 600-1300 AUS Type 30 / 1100 FT
External dimensions W x D x H mm 595 x 595 x 1935 595 x 595 x 1315 1100 x 570 x 635
Internal dimensions W x D x H mm 480 x 519 x 1660 480 x 519 x 1108 986 x 494 x 425
Weight (kg) 175 121 110
Door(s) 1 (hinged right) 1 (hinged right) 2
Outer body: RAL 7035 - light grey Inner fittings
Art.-No., door/s: RAL 7035 - light grey steel sheet B80-2601-A B80-2607-A B80-2602-A
Art.-No., door/s: RAL 1007 - similar daffodil yellow steel sheet B80-2603-A B80-2608-A B80-2609-A
SiS Type 30 / 600 / SiS Type 30 / 600-1300
With inner fittings:
1 x base trough (collection volume 26 litres)
1 x perforated trough cover as 1st level
With automatic thermal closing mechanism
.
.
.
AUS Type 30 / 1100 FT
Extraction fans please see page 54 !
Socle incl., with removable panel
HAZARDOUS SUBSTANCES CABINETS as per EN 14470-1 (TYPE 30)
Hazardous substances
cabinets (Type 30)
29
Extraction fans please seepage 54 !
Whole construction tested and approved by a recognized
materials testing institute as per EN 14470-1 (Type 30) with
a fire resistance >30 minutes
Body made of B1 material RAL 7035 - light grey, doors either
in RAL 7035 - light grey or RAL 1007 – similar daffodil yellow
Shelf height adjustable at intervals of 32 mm
Automatic thermal closing mechanism if fire occurs
• Door(s) after temperature increase to ≤ 50°C and
• Inlet and outlet channels after temperature increase to
70°C (±10°C)
DN 80 ventilation connection for exhaust air extraction
Operation complies with TRbF 20-L (approved even without
exhaust air connection!)
Grounding connection in accordance with BGR 132
(avoidance of sources of ignition)
Markings according to EN 14470-1 / TRbF 20, Annex L /
ISO 3864
Levelling feet for installing cabinet horizontally
Doors with cylinder lock (simultaneous closing)
Approved for storage of flammable liquids at the
workplace as per EN 14470-1 (Type 30) and TRbF 20 - L
With inner fittings:
1 x base trough (collection volume 33 litres)
1 x perforated trough cover as 1st level
3 x shelves
With automatic thermal closing mechanism
SiS Type 30 / 1200, Art.-No. B80-2604-A, doors similar RAL 1007, incl. 3 shelves, base trough and perforated cover plate
Accessory Material Art.-No.
Shelf steel sheet B80-2610-A
.
.
.
.
.
.
.
.
.
.
.
.
.
.
SiS Type 30 / 1200
Model SiS Type 30 / 1200
External dimensions W x D x H in mm 1195 x 595 x 1935
Internal dimensions W x D x H in mm 1080 x 519 x 1660
Weight (kg) 284
Doors 2
Outer body: RAL 7035 - light grey Inner fittings
Art.-No., doors: RAL 7035 - light grey steel sheet B80-2600-A
Art.-No., doors: RAL 1007 - similar daffodil yellow steel sheet B80-2604-A
SiS Type 30 / 1200, Art.-No. B80-2604-A, doors similar RAL 1007, incl. 3 shelves, base troughand perforated cover plate
Socle incl., with removable panel
Hazardous substances
cabinets (Type 30)
HAZARDOUS SUBSTANCES CABINETS as per EN 14470-1 (TYPE 30)
30
SIS TYPE 30 / 1200 KL - KOMBILAB
Extraction fans please see page 54 !
2
2
3
3
1
1
Approved for the storage of flammable liquids at the workplace
as per EN 14470-1 (Type 30) and TRbF 20 - L, toxic and very toxic
substances, acids and alkalis. Ideal combination for storage of
different hazardous substances in a very small space.
Safety cabinet
SiS Type 30 / 1200 KL4, Art.-No. B80-2612-A
SiS Type 30 / 1200 KL6 GL, Art.-No. B80-2614-A
Model Type 30 / 1200 KL4 Type 30 / 1200 KL5 Type 30 / 1200 KL6 GLExternal dimensions* W x D x H in mm 1195 x 600 x 1935 1195 x 600 x 1935 1195 x 600 x 1935
Doors 4 4 4
Design of acid/alkali cabinet pull-out shelves 4 6 6
usable inner height mm 4 x 420 4 x 275 / 2 x 248 4 x 275 / 2 x 248
Weight (kg) 221 231 236
Outer body: RAL 7035 - light grey Material inner fittings
Art.-No., door Type 30 cabinet: RAL 7035 - light grey steel sheet B80-2612-A B80-2613-A B80-2614-A
Art.-No., door Type 30 cabinet: RAL 1007 - similar daffodil yellow steel sheet B80-2615-A B80-2616-A B80-2617-A
Whole construction tested and approved by a recognized materials testing
institute as per EN 14470-1 (Type 30) with a fire resistance >30 minutes
Body made of B1 material RAL 7035 - light grey, doors either in
RAL 7035 – light grey or RAL 1007 – similar daffodil yellow
Shelf height adjustable at intervals of 32 mm
Automatic thermal closing mechanism if fire occurs
• Door after temperature increase to ≤ 50°C and
• Inlet and outlet channels after temperature increase to 70°C (±10°C)
DN 80 ventilation connection for exhaust air extraction
Operation complies with TRbF 20-L (approved even without exhaust air
connection!)
Grounding connection in accordance with BGR 132 (avoidance of sources
of ignition)
Markings according to EN 14470-1 / TRbF 20, Annex L / ISO 3864
Levelling feet for installing cabinet horizontally
Door with cylinder lock
Door hinged right as standard
With inner fittings:
*) plus cover panel: height 110 mm
Storage cabinet for flammable liquids type 30 as per
EN 14470-1
- 1 x base trough (collection volume 23 litres)
- 1 x perforated trough cover as 1st storing level
- 2 x shelves
- Automatic thermal closing mechanism if fire occurs
• Door after temperature increase to ≤ 50°C and
• Inlet and outlet channels after temperature increase to 70°C (±10°C)
Storage cabinet for acids and alkalis
- 2 x 2 or 2 x 3 pull-out trough-shaped shelves
made of PE, white
Poison compartment with acrylic glass door
- Dividing shelf
.
.
.
.
.
.
.
.
.
.
.
1
1
2
3
Hazardous substances
cabinets (Type 90)
CONTENTS HAZARDOUS SUBSTANCES CABINETS (TYPE 90)
31
Hazardous substances cabinetsas per EN 14470-1 (Type 90) ...
Hazardous substances cabinets as per EN 14470-1 (Type 90)
For documents width 1200 mm. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Page 57
Hazardous substances cabinets as per EN 14470-1 (Type 90)
with shelves width 600 mm . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Page 42/43
Hazardous substances cabinets as per EN 14470-1 (Type 90)
with shelves width 1200 mm . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Page 44/45
Hazardous substances underbench cabinets as per EN 14470-1 (Type 90)
Width 600 / 880 / 1100 / 1400 mm . . . . . . . . . . . . . . . . . . . . . . . . . . . . Page 46-53
Extraction fans / hazardous substances filter attachment . . . . . . . . . . . Page 54/55
Hazardous substances cabinets as per EN 14470-1 (Type 90)
Airbag cabinet width 900 mm . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Page 56
Hazardous substances cabinets as per EN 14470-1 (Type 90)
Width 600 / 900 / 1200 / 1400 mm . . . . . . . . . . . . . . . . . . . . . . . . . . . . Page 32-35
Hazardous substances drum cabinets as per EN 14470-1 (Type 90)
Width 900 mm . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Page 36/37
Hazardous substances drum cabinets as per EN 14470-1 (Type 90)
Width 1550 mm . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Page 38-41
Branded qu
ality
MADE by LA
CONT
NEW
SIS TYPE 90 / 600
32
Extraction fans please see page 54 !
Hazardous substances
cabinets (Type 90)
Whole construction tested and approved by a recognizedmaterials testing institute as per EN 14470-1 (Type 90)with a fire resistance >90 minutesInsulation according to DIN 4102 Outer body powder-coated steel sheet, RAL 7035 - light grey,door either in RAL 7035 - light grey or RAL 1007 - daffodilyellowInner body made of HPL-coated sheets - RAL 7035 Stainless steel base plate Shelves height adjustable at intervals of 64 mm Automatic thermal closing mechanism if fire occurs• Door after temperature increase to ≤ 50°C and• Inlet and outlet channels after temperature increaseto 70°C (±10°C)
DN 75 ventilation connection for exhaust air extraction Operation complies with TRbF 20-L (approved even without exhaust air connection!) Grounding connection in accordance with BGR 132 (avoidance of sources of ignition)Markings according to EN 14470-1 / TRbF 20 Annex L / ISO 3864Levelling feet for installing cabinet horizontallyDoor with cylinder lockDoor hinged right as standard acc. to DIN (door hinged left on request)
SiS Type 90 / 600-1300,Art.-No. B80-2529-B,RAL 7035, incl. 2 shelves,base trough and cover plate
Approved for storage of flammable liquids at the
workplace as per EN 14470-1 (Type 90) and TRbF 20 - L
With inner fittings:
1 x base trough (collection
volume 22 litres)
1 x perforated trough cover as
1st level
3 x shelves (Type 90/600-1300:
2 x shelves)
automatic thermal closing
mechanism
SiS Type 90 / 600, Art.-No. B80-2100-G,door RAL 1007, incl. 3 shelves, base troughand cover plate
SF 1, RAL 7035,Art.-No. B80-2517-B
Accessories Material Art.-No.
Shelf steel sheet B80-2050-D
Shelf stainless steel V2A B80-2533-B
PE-insert for base trough, for storage of aggressive media B80-2060-D
PE-insert for shelf, for storage of aggressive media B80-2070-D
Model SF 1External dimensions W x D x H in mm 420 x 370 x 436
Door 1
Art.-No. B80-2517-B
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
Model SiS Type 90 / 600 SiS Type 90 / 600-1300
External dimensions W x D x H in mm 595 x 598 x 1935 595 x 598 x 1315
Inner dimensions W x D x H in mm 492 x 430 x 1700 492 x 430 x 1080
Weight in kg 306 225
Door 1 (DIN right) 1 (DIN right)
Outer body: RAL 7035 - light grey Innerfittings
Art.-No., door: RAL 7035 – light grey steel sheet B80-2000-D B80-2529-B
Art.-No., door: RAL 7035 – light grey stainless steel V2A B80-2527-B B80-2530-B
Art.-No., door: RAL 1007 – daffodil yellow steel sheet B80-2100-G B80-2531-G
Art.-No., door: RAL 1007 – daffodil yellow stainless steel V2A B80-2528-G B80-2532-G
.
.
.
.
Safe compartments
Spatial separation from flammable liquids
Door with cylinder lock
Powder-coated steel sheet in RAL 7035 – light grey
With installation accessories for fixing in position,
standing on shelf
For storage of small amounts of toxic and very toxic
substances in storeLAB® safety cabinets
HAZARDOUS SUBSTANCES CABINETS as per EN 14470-1 (TYPE 90)
SIS TYPE 90 / 900
33
HAZARDOUS SUBSTANCES CABINETS as per EN 14470-1 (TYPE 90)
Whole construction tested and approved by a recognized
materials testing institute as per EN 14470-1 (Type 90)
with a fire resistance of >90 minutes
Insulation according to DIN 4102
Outer body powder-coated steel sheet, RAL 7035 - light grey,
doors either in RAL 7035 - light grey or RAL 1007 - daffodil
yellow
Inner body made of HPL-coated sheets - RAL 7035
Stainless steel base plate
Shelf height adjustable at intervals of 64 mm
Automatic thermal closing mechanism if fire occurs
• doors after temperature increase to ≤ 50°C and
• and inlet and outlet channels after temperature increase
to 70°C (±10°C)
DN 75 ventilation connection for exhaust air extraction
Operation complies with TRbF 20-L (approved even without
exhaust air connection)
Grounding connection in accordance with BGR 132
(avoidance of sources of ignition)
Markings according to EN 14470-1 /
TRbF 20, Annex L / ISO 3864
Levelling feet for installing cabinet
horizontally
Doors with cylinder lock (simultaneous
closing)
Approved for storage of flammable liquids at the workplace
as per EN 14470-1 (Type 90) and TRbF 20 - L
With inner fittings:
1 x base trough (collection volume 29 litres)
1 x perforated trough cover as 1st level
3 x shelves
with automatic thermal closing mechanism
SiS Type 90 / 900, Art.-No. B80-2521-G, doors RAL 1007,incl. 3 shelves, base trough and perforated cove plate
SF 1, RAL 7035,Art.-No. B80-2517-B
Accessories Material Art.-No.
Shelf steel sheet B80-2523-B
Shelf stainless steel V2A B80-2524-B
PE-insert for base trough for storage of aggressive media B80-2525-B
PE-insert for shelf for storage of aggressive media B80-2526-B
Model SF 1External dimensions W x D x H in mm 420 x 370 x 436
Door 1
Art.-No. B80-2517-B
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
Model SiS Type 90 / 900
External dimensions W x D x H in mm 900 x 598 x 1935
Internal dimensions W x d x H in mm 797 x 430 x 1700
Weight in kg 395
Doors 2
Outer body: RAL 7035 - light grey Inner fittings
Art.-No., doors: RAL 7035 - light grey steel sheet B80-2519-B
Art.-No., doors: RAL 7035 - light grey stainless steel V2A B80-2520-B
Art.-No., doors: RAL 1007 - daffodil yellow steel sheet B80-2521-G
Art.-No., doors: RAL 1007 - daffodil yellow stainless steel V2A B80-2522-G
.
.
.
.
Safe compartments
Spartial separation from flammable liquids
Door with cylinder lock
Powder-coated steel sheet in
RAL 7035 – light grey
With installation accessories for fixing in
position, standing on shelf
For storage of small amounts of toxic and very
toxic substances in storeLAB® safety cabinets
Hazardous substances
cabinets (Type 90)
SIS TYPE 90 / 1200
34
Extraction fansplease see page 54 !
Hazardous substances
cabinets (Type 90)
HAZARDOUS SUBSTANCES CABINETS as per EN 14470-1 (TYPE 90)
Whole construction tested and approved by a recognized materials testing institute as per EN 14470-1 (Type 90) with a fire resistance of >90 minutes Insulation according to DIN 4102 Outer body powder-coated steel sheet, RAL 7035 - light grey,doors either in RAL 7035 - light grey or RAL 1007 - daffodilyellowInner body made of HPL-coated sheets - RAL 7035 Stainless steel base plateShelf height adjustable at intervals of 64 mmAutomatic thermal closing mechanism if fire occurs• doors after temperature increase to ≤ 50°C and• inlet and outlet channels after temperature increase to70°C (±10°C)
DN 75 ventilation connection for exhaust air extractionOperation complies with TRbF 20-L (approved even withoutexhaust air connection) Grounding connection in accordance withBGR 132 (avoidance of sources of ignition) Marking according to EN 14470-1 / TRbF 20, Annex L / ISO 3864 Levelling feet for installing cabinethorizontally Doors with cylinder lock (simultaneous closing)
Approved for storage of flammable liquids at the workplace
as per EN 14470-1 (Type 90) and TRbF 20 - L
With inner fittings:
1 x base trough (collection volume 33 litres) 1 x perforated trough cover as 1st level3 x shelves (Type 90 / 1200), 2 x shelves (Type 90 / 1200-1300) with automatic thermal closing mechanism
SiS Type 90 / 1200, Art.-No. B80-2102-G, doors RAL 1007,incl. 3 shelves, base trough and perforated cover plate
Accessories Material Art.-No.
Shelf steel sheet B80-2052-D
Shelf stainless steel V2A B80-2516-B
PE-insert for base trough,for storage of aggressive media B80-2062-D
PE-insert for shelf,for storage of aggressive media B80-2072-D
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
Model SiS Type 90 / 1200 SiS Type 90 / 1200-1300External dimensionsW x D x H in mm 1190 x 598 x 1935 1190 x 598 x 1315
Internal dimensionsW x d x H in mm 1087 x 430 x 1700 1087 x 430 x 1080
Weight in kg 505 380
Doors 2 2
Outer body: RAL 7035 -light grey Inner fittings
Art.-No., doors:RAL 7035 - light grey steel sheet B80-2002-D B80-2512-B
Art.-No., doors:RAL 7035 - light grey stainless steel V2A B80-2510-B B80-2513-B
Art.-No., doors:RAL 1007 - daffodil yellow steel sheet B80-2102-G B80-2514-G
Art.-No., doors:RAL 1007 - daffodil yellow stainless steel V2A B80-2511-G B80-2515-G
SF 2, RAL 7035, Art.-No. B80-2518-B
Model SF 1 SF 2External dimensionsW x D x H in mm 420 x 370 x 436 1000 x 370 x 436
Doors 1 2
Art.-No. B80-2517-B B80-2518-B
.
.
.
.
Safe compartments
Spartial separation from flammable liquids
Door(s) with cylinder lock
Powder-coated steel sheet in RAL 7035 – light grey
With installation accessories for fixing in position,
standing on shelf
For storage of small amounts of toxic and very toxic
substances in storeLAB® safety cabinets
35
SIS TYPE 90 / 1400
Extraction fansplease see page 54 !
HAZARDOUS SUBSTANCES CABINETS as per EN 14470-1 (TYPE 90)
Whole construction tested and approved by
a recognized materials testing institute as per
EN 14470-1 (Type 90) with a fire resistance
of >90 minutes
Insulation according to DIN 4102
Outer body powder-coated steel sheet,
RAL 7035 - light grey, doors either in
RAL 7035 - light grey or RAL 1007 - daffodil yellow
Inner body made of HPL-coated sheets - RAL 7035
Stainless steel base plate
Shelf height adjustable at intervals of 64 mm
Automatic thermal closing mechanism if fire occurs
• doors after temperature increase to ≤ 50°C and
• inlet and outlet channels after temperature
increase to 70°C (±10°C)
DN 75 ventilation connection for exhaust air
extraction
Operation complies with TRbF 20-L (approved
even without exhaust air connection)
Grounding connection in accordance with
BGR 132 (avoidance of sources of ignition)
Marking according to EN 14470-1 /
TRbF 20, Annex L / ISO 3864
Levelling feet for installing cabinet
horizontally
Doors with cylinder lock (simultaneous closing)
Approved for storage of flammable liquids at
the workplace as per EN 14470-1 (Type 90)
and TRbF 20 - L
With inner fittings:
1 x base trough (collection volume 34 litres)
1 x perforated trough cover as 1st level
3 x shelves
with automatic thermal closing mechanism
SiS Type 90 / 1400, Art.-No. B80-2701-B, RAL 7035,incl. 3 shelves, base trough and perforated cover plate
Accessories Material Art.-No.
Shelf steel sheet B80-2705-B
Shelf stainless steel V2A B80-2706-B
PE-insert for base trough for storage of aggressive media B80-2707-B
PE-insert for shelf for storage of aggressive media B80-2708-B
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
Model SiS Type 90 / 1400
External dimensions W x D x H in mm 1400 x 598 x 1935
Internal dimensions W x d x H in mm 1297 x 430 x 1700
Weight in kg 615
Doors 2
Outer body: RAL 7035 - light grey Inner fittings
Art.-No., doors: RAL 7035 - light grey steel sheet B80-2701-B
Art.-No., doors: RAL 7035 - light grey stainless steel V2A B80-2702-B
Art.-No., doors: RAL 1007 - daffodil yellow steel sheet B80-2703-G
Art.-No., doors: RAL 1007 - daffodil yellow stainless steel V2A B80-2704-G
Extra large storage capacity !!!
Hazardous substances
cabinets (Type 90)
SIS-FAS TYPE 90 / 900
36
Extraction fans please see page 54 !
SAFETY - FIRE PROTECTION - DRUM CABINETS as per EN 14470-1 (TYPE 90)
For storage of flammable liquids in a standing 200-litre drum
inside buildings
Suitable for installation directly at workplace!
Whole construction tested and approved by a recognized materialstesting institute as per EN 14470-1 (type 90) with a fire resistance>90 minutesInsulation according to DIN 4102Outer body powder-coated steel sheet in RAL 7035 - light grey,doors RAL 1007 - daffodil yellowInner body made of HPL-coated sheets - RAL 7035 Stainless steel base plateBase trough acc. to WHG with Ü-sign acc. to regulations forbase troughs, made of 3 mm steel sheetAutomatic thermal closing mechanism if fire occurs• Doors after temperature increase to ≤ 50°C and• Inlet and outlet channels after temperature increase to 70°C (±10°C)DN 75 ventilation connection for exhaust air extractionOperation complies with TRbF 20-L (approved even without exhaustair connection) Grounding connection in accordance with BGR 132 (avoidance ofsources of ignition) Marking according to EN 14470-1 / TRbF 20, Annex L / ISO 3864 Doors with cylinder lock (simultaneous closing)
.
.
.
.
.
.
.
.
.
.
.
.
SiS-FAS Type 90 / 900-EW, Art.-No. B80-2863-A
Socle, Art.-No. B80-2713-A with removable panel
SiS-FAS Type 90 / 900-EW, Art.-No. B80-2863-A,with optional grid for storing small containers
Model SiS-FAS Type 90 / 900-EWExternal dimensions W x D x H in mm 900 x 900 x 1935
Internal dimensions W x D x H in mm* 797 x 735 x 1290
Weight (kg) 535
Doors 2
Capacity 200-litre drums, standing 1
Collection volume of base trough, litres 220
Art.-No.,Outer body: RAL 7035 - light grey,doors: RAL 1007 - daffodil yellow B80-2863-A
Accessories Art.-No.Grid, max. load 75 kg B80-2873-A
PE insert for collection trough, for storing aggressive media B80-2874-A
Socle, tested acc. to type 90 cabinets W x D x H mm = 900 x 900 x 113 B80-2713-A
* from upper edge of collection trough
Hazardous substances
cabinets (Type 90)
SIS-FAS TYPE 90 / 900
37
Hazardous substances
cabinets (Type 90)
SAFETY - FIRE PROTECTION - DRUM CABINETS as per EN 14470-1 (TYPE 90)
Whole construction tested and approved by a recognized materials testing
institute as per EN 14470-1 (type 90) with a fire resistance
>90 minutes
Insulation according to DIN 4102
Outer body powder-coated steel sheet in RAL 7035 -
light grey, doors RAL 1007 - daffodil yellow
Inner body made of HPL-coated sheets - RAL 7035
Stainless steel base plate
Base trough acc. to WHG with Ü-sign acc. to regulations for
base troughs, made of 3 mm steel sheet
All shelving fittings galvanized
Storage of up to 3 x 60-litre steel drums possible, alternatively with
grid for storing small containers or canisters
Height-adjustable shelves
Max. load per shelf 200 kg
Automatic thermal closing mechanism if fire occurs
• Doors after temperature increase to ≤ 50°C and
• Inlet and outlet channels after temperature increase to 70°C (±10°C)
DN 75 ventilation connection for exhaust air extraction
Operation complies with TRbF 20-L (approved even without exhaust
air connection)
Grounding connection in
accordance with BGR 132
(avoidance of sources of ignition)
Marking according to EN 14470-1/
TRbF 20, Annex L / ISO 3864
Doors with cylinder lock
(simultaneous closing)
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
For the horizontal storage of flammable liquids in max. 3 x 60-litre steel
drums inside buildings
SiS-FAS Type 90 / 900-260 GR, Art.-No. B80-2876-ASiS-FAS Type 90 / 900-160 GR, Art.-No. B80-2877-A
SiS-FAS Type 90 / 900-360, Art.-No. B80-2875-A
Model SiS-FAS Type 90 / 900-360 SiS-FAS Type 90 / 900-260 GR SiS-FAS Type 90 / 900-160 GR SiS-FAS Type 90 / 900 KG-GR
External dimensions W x D x H in mm 900 x 900 x 1935 900 x 900 x 1935 900 x 900 x 1935 900 x 900 x 1935
Internal dimensions W x D x H in mm* 797 x 735 x 1580 797 x 735 x 1580 797 x 735 x 1580 797 x 735 x 1580
Weight (kg) 530 530 530 530
Doors 2 2 2 2
Capacity 60-litre steel drums, horizontal 3 2 1 -
No. of grids for storing smallcontainers - 1 2 3
Collection volume of base trough, litres 67 67 67 67
Art.-No.,Outer body: RAL 7035 - light grey,doors: RAL 1007 - daffodil yellow B80-2875-A B80-2876-A B80-2877-A B80-2872-A
* from upper edge of collection trough
SIS-FAS TYPE 90 / 1550
38
SAFETY - FIRE PROTECTION - DRUM CABINETS as per EN 14470-1 (TYPE 90)
For storage of flammable liquids in containers and drums up to
200 litres inside buildings
Suitable for installation directly at workplace !
Whole construction tested and approved by a recognized materials
testing institute as per EN 14470-1 (type 90) with a fire resistance
>90 minutes
Insulation according to DIN 4102
Outer body powder-coated steel sheet in
RAL 7035 - light grey, doors RAL 1007 - daffodil yellow
Inner body made of HPL-coated sheets - RAL 7035
Stainless steel base plate
Base trough acc. to WHG with Ü-sign acc. to regulations for base
troughs, made of 3 mm steel sheet
Automatic thermal closing mechanism if fire occurs
• Doors after temperature increase to ≤ 50°C and
• Inlet and outlet channels after temperature increase to 70°C (±10°C)
DN 75 ventilation connection for exhaust air extraction
Operation complies with TRbF 20-L (approved even without exhaust
air connection)
Grounding connection in accordance with BGR 132 (avoidance of
sources of ignition)
Marking according to EN 14470-1 / TRbF 20, Annex L / ISO 3864
Doors with cylinder lock (simultaneous closing)
Door inside clearance width 1310 mm
Internal emergency opening device
.
.
.
.
.
.
.
.
.
.
.
.
.
.
emergency opening device
Socle, Art.-No. B80-2714-A with removable panel
Hazardous substances
cabinets (Type 90)
SIS-FAS TYPE 90 / 1550
39
Extraction fans please see page 54 !
SAFETY - FIRE PROTECTION - DRUM CABINETS as per EN 14470-1 (TYPE 90)
For storage of flammable liquids of max. 2 standing 200-litre drums
inside buildings
Model SiS-FAS Type 90 / 1550-CW SiS-FAS Type 90 / 1550-EWExternal dimensions W x D x H in mm 1550 x 1025 x 2200 1550 x 1025 x 2200
Internal dimensions W x D x H in mm* 1450 x 870 x 1645 1450 x 870 x 1745
Weight (kg) 1030 1030
Doors 2 2
Capacity 200-litre drums, standing 2 2
Collection volume of base trough, litres 220 220
Art.-No.,Outer body: RAL 7035 - light grey,doors: RAL 1007 - daffodil yellow B80-2850-A B80-2851-A
Generous door clearances for easyand convenient Europa pallet handling.
Base trough acc. to WHG, made from 3 mm steel sheet with grid;
with Ü-sign acc. to regulations for base troughs
• Version 1 – with base recesses (for transport by fork-lift
trucks, etc.), easy removable,
• Version 2 – without base recesses
Lacquered in RAL 7035 - light grey
Collection volume 220 litres
.
.
.
SiS-FAS Type 90 / 1550-EW, Art.-No. B80-2851-A
SiS-FAS Type 90 / 1550-CW, Art.-No. B80-2850-A
SiS-FAS Type 90 / 1550-CW, Art.-No. B80-2850-A,with optional grid for storing small containers
* from top edge of collection trough
Accessories Art.-No.
Grid, max. load 75 kg B80-2852-A
PE-insert for base trough, for storage of aggressive media B80-2853-A
Socle, tested acc. to type 90 cabinets W x D x H mm = 1550 x 1025 x 113 B80-2714-A
Hazardous substances
cabinets (Type 90)
SIS-FAS TYPE 90 / 1550
40
Extraction fans please see page 54 !
SAFETY - FIRE PROTECTION - DRUM CABINETS as per EN 14470-1 (TYPE 90)
Accessory Art.-No.
Socle, tested acc. to type 90 cabinets W x D x H mm = 1550 x 1025 x 113 B80-2714-A
For horizontal storage of flammable liquids of
max. 9 x 60-litre steel drums inside buildings
Base trough acc. to WHG, made from 3 mm steel
sheet, lacquered RAL 7035; with Ü-sign acc. to
regulations for base troughs
Collection volume 220 litres
Collection trough grid support projects in front of
shelving rack
All shelf fittings galvanized
Storage for up to 9 x 60-litre steel drums is possible,
alternatively grid-type storage levels for storing small
containers
Storage levels height-adjustable
Max. load per storage level 200 kg
.
.
.
.
.
.
.
Model SiS-FAS Type 90 / 1550-960 SiS-FAS Type 90 / 1550-660 GR SiS-FAS Type 90 / 1550-360 GR
External dimensions W x D x H in mm 1550 x 1025 x 2200 1550 x 1025 x 2200 1550 x 1025 x 2200
Internal dimensions W x D x H in mm* 1450 x 870 x 1745 1450 x 870 x 1745 1450 x 870 x 1745
Weight (kg) 1040 1040 1040
Doors 2 2 2
Capacity 60-litre horizontal steel drums 9 6 3
Number of grid-type storage levels for storing small containers - 1 2
Collection volume of base trough, litres 220 220 220
Art.-No.,Outer body: RAL 7035 - light grey,doors: RAL 1007 - daffodil yellow B80-2854-A B80-2855-A B80-2856-A
SiS-FAS Type 90 / 1550-660 GR, Art.-No. B80-2855-A
SiS-FAS Type 90 / 1550-960, Art.-No. B80-2854-A
* from top edge of collection trough
Hazardous substances
cabinets (Type 90)
SIS-FAS TYPE 90 / 1550
41
Extraction fans please see page 54 !
SAFETY - FIRE PROTECTION - DRUM CABINETS as per EN 14470-1 (TYPE 90)
For storage of flammable liquids in small
containers inside buildings
Base trough acc. to WHG, made from galvanized
3 mm steel sheet, with Ü-sign acc. to regulations
for base troughs
Collection volume 80 litres
All shelf fittings galvanized
Max. load per storage level 200 kg with load uniformly
distributed
Storage levels height-adjustable at 25 mm intervals
.
.
.
.
.
Model SiS-FAS Type 90 / 1550 KG-GR
External dimensions W x D x H in mm 1550 x 1025 x 2200
Internal dimensions W x D x H in mm 1450 x 870 x 1955
Weight (kg) 1000
Doors 2
Type of lowest storage level Base trough
Other storage levels 4 x grid-type shelves
Collection volume of base trough, litres 80
Art.-No.,Outer body: RAL 7035 - light grey,doors: RAL 1007 - daffodil yellow B80-2857-A
Accessories Art.-No.Additional grid-type storage level B80-2858-A
Socle, tested acc. to type 90 cabinets W x D x H mm = 1550 x 1025 x 113 B80-2714-A
SiS FAS Type 90 / 1550 KG-GR is used wherever othersafety cabinets cannot provide sufficient storage space.
SiS-FAS Type 90 / 1550 KG-GR, Art.-No. B80-2857-A
SiS-FAS Type 90 / 1550 KG-GR, Art.-No. B80-2857-A
emergency opening device
Hazardous substances
cabinets (Type 90)
Whole construction tested and approved by a recognized materials
testing institute as per EN 14470-1 (Type 90) with a fire resistance
>90 minutes
Insulation according to DIN 4102
Outer body powder-coated steel sheet, RAL 7035 - light grey,
door either in RAL 7035 - light grey or RAL 1007 - daffodil
yellow
Inner body made of HPL-coated sheets - RAL 7035
Stainless steel base plate
Pull-out shelves with automatic return ensure great working safety
Automatic thermal closing mechanism if fire occurs
• Door after temperature increase to ≤ 50°C and
• Inlet and outlet channels after temperature increase to 70°C (±10°C)
DN 75 ventilation connection for exhaust air extraction
Operation complies with TRbF 20-L (approved even without exhaust
air connection!)
Grounding connection in accordance with BGR 132 (avoidance of
sources of ignition)
Markings according to EN 14470-1 / TRbF 20, Annex L / ISO 3864
Levelling feet for installing cabinet horizontally
Door with cylinder lock
Door hinged right acc. to DIN
Approved for storage of flammable liquids at the workplace as per
EN 14470-1 (Type 90) and TRbF 20 - L
With inner fittings:
Either with 6, 5 or 4 trough-shaped shelves (AZB)*
Automatic thermal closing mechanism
* max. load 30 kg per shelfwith load uniformly distributed
SiS Type 90 / 600 VS6, Art.-No. B80-2570-B, RAL 7035,incl. 6 pull-out shelves
Accessories Material Art.-No.
Perforated cover plate for trough-shaped shelf steel sheet B80-2582-B
Perforated cover plate for trough-shaped shelf stainless steel V2A B80-2583-B
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
Model SiS Type 90 / 600 VS6 SiS Type 90 / 600 VS5 SiS Type 90 / 600 VS4
External dimensions W x D x H in mm 595 x 598 x 1935 595 x 598 x 1935 595 x 598 x 1935
Internal dimensions W x D x H in mm 492 x 430 x 1700 492 x 430 x 1700 492 x 430 x 1700
Weight in kg 317 313 309
Doors DIN right 1 1 1
Inner fittings 6 x AZB 5 x AZB 4 x AZB
Outer body: RAL 7035 - light grey Material inner fittings
Art.-No., door: RAL 7035 - light grey steel sheet B80-2570-B B80-2574-B B80-2578-B
Art.-No., door: RAL 7035 - light grey stainless steel V2A B80-2571-B B80-2575-B B80-2579-B
Art.-No., door: RAL 1007 - daffodil yellow steel sheet B80-2572-G B80-2576-G B80-2580-G
Art.-No., door: RAL 1007 - daffodil yellow stainless steel V2A B80-2573-G B80-2577-G B80-2581-G
42
SIS TYPE 90 / 600 VS
Extraction fansplease see page 54 !
Hazardous substances
cabinets (Type 90)
HAZARDOUS SUBSTANCES CABINETS WITH TROUGH-SHAPED SHELVES (TYPE 90)
Whole construction tested and approved by a recognized materials
testing institute as per EN 14470-1 (Type 90) with a fire resistance
>90 minutes
Insulation according to DIN 4102
Outer body powder-coated steel sheet,
RAL 7035 - light grey, door either in
RAL 7035 - light grey or RAL 1007 - daffodil yellow
Inner body made of HPL-coated sheets - RAL 7035
Stainless Steel base plate
Pull-out shelves with automatic return ensure great working safety
Automatic thermal closing mechanism if fire occurs
• Doors and drawers after temperature increase to ≤ 50°C and
• Inlet and outlet channels after temperature increase to 70°C (±10°C)
DN 75 ventilation connection for exhaust air extraction
Operation complies with TRbF 20-L (approved even without exhaust
air connection!)
Grounding connection in accordance with BGR 132 (avoidance of
sources of ignition)
Marking according to EN 14470-1 / TRbF 20, Annex L / ISO 3864
Levelling feet for installing cabinet horizontally
Door with cylinder lock
Door hinged right acc. to DIN
Approved for storage of flammable liquids at the workplace as per
EN 14470-1 (Typ 90) und TRbF 20 - L
With inner fittings:
Either witht 4 or 3 trough-shaped shelves (AZB)*
Disposal compartment (ESF)
Automatic thermal closing mechanism
SiS Type 90 / 600 VS4-ES, Art.-No. B80-2588-B, RAL 7035, incl. 4 trough-shaped shelves and 1 disposal compartment
Accessories Material Art.-No.
Perforated cover plate for trough-shaped shelf steel sheet B80-2582-B
Perforated cover plate for trough-shaped shelf stainless steel V2A B80-2583-B
Perforated cover plate for disposal compartment steel sheet B80-2594-B
Perforated cover plate for disposal compartment stainless steel V2A B80-2595-B
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
Model SiS Type 90 / 600 VS3-ES SiS Type 90 / 600 VS4-ES
External dimensions W x D x H in mm 595 x 598 x 1935 595 x 598 x 1935
Internal dimensions W x D x H in mm 492 x 430 x 1700 492 x 430 x 1700
Weight in kg 314 318
Doors DIN right 1 1
Inner fittings 1 x ESF 1 x ESF3 x AZB 4 x AZB
Outer body: RAL 7035 - light grey Material inner fittings
Art.-No., door: RAL 7035 - light grey steel sheet B80-2584-B B80-2588-B
Art.-No., door: RAL 7035 - light grey stainless steel V2A B80-2585-B B80-2589-B
Art.-No., door: RAL 1007 - daffodil yellow steel sheet B80-2586-G B80-2590-G
Art.-No., door: RAL 1007 - daffodil yellow stainless steel V2A B80-2587-G B80-2591-G
* max. load 30 kg per shelfwith load uniformly distributed
43
SIS TYPE 90 / 600 ES
HAZARDOUS SUBSTANCES CABINETS WITH TROUGH-SHAPED SHELVES (TYPE 90)
Hazardous substances
cabinets (Type 90)
Whole construction tested and approved by a recognized
materials testing institute as per EN 14470-1 (Type 90) with
a fire resistance >90 minutes
Insulation according to DIN 4102
Outer body powder-coated steel sheet, RAL 7035 - light grey,
doors either in RAL 7035 - light grey or RAL 1007 - daffodil
yellow
Inner body made of HPL-coated sheets - RAL 7035
Stainless Steel base plate
Pull-out shelves with automatic return ensure great working safety
Automatic thermal closing mechanism if fire occurs
• Doors after temperature increase to ≤ 50°C and
• Inlet and outlet channels after temperature increase
to 70°C (±10°C)
DN 75 ventilation connection for exhaust air extraction
Operation complies with TRbF 20-L (approved even without
exhaust air connection!)
Grounding connection in accordance with BGR 132 (avoidance
of sources of ignition)
Markings according to EN 14470-1 / TRbF 20, Annex L / ISO 3864
Levelling feet for installing cabinet horizontally
Doors with cylinder lock (simultaneous closing)
Approved for storage of flammable liquids at the workplace
as per EN 14470-1 (Type 90) and TRbF 20 - L
With inner fittings:
Either with 6, 5 or 4 trough-shaped shelves (AZB)*
Automatic thermal
closing mechanism
SiS Type 90 / 1200 VS6, Art.-No. B80-2534-B, RAL 7035,incl. 6 pull-out shelves
Accessories Material Art.-No.
Perforated cover plate for trough-shaped shelf steel sheet B80-2546-B
Perforated cover plate for trough-shaped shelf stainless steel V2A B80-2547-B
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
Model SiS Type 90 / 1200 VS6 SiS Type 90 / 1200 VS5 SiS Type 90 / 1200 VS4
External dimensions W x D x H in mm 1190 x 598 x 1935 1190 x 598 x 1935 1190 x 598 x 1935
Internal dimensions W x D x H in mm 1087 x 430 x 1700 1087 x 430 x 1700 1087 x 430 x 1700
Weight in kg 522 514 506
Doors 2 2 2
Inner fittings 6 x AZB 5 x AZB 4 x AZB
Outer body: RAL 7035 - light grey Material inner fittings
Art.-No., doors: RAL 7035 - light grey steel sheet B80-2534-B B80-2538-B B80-2542-B
Art.-No., doors: RAL 7035 - light grey stainless steel V2A B80-2535-B B80-2539-B B80-2543-B
Art.-No., doors: RAL 1007 - daffodil yellow steel sheet B80-2536-G B80-2540-G B80-2544-G
Art.-No., doors: RAL 1007 - daffodil yellow stainless steel V2A B80-2537-G B80-2541-G B80-2545-G
* max. load 30 kg per shelfwith load uniformly distributed
44
SIS TYPE 90 / 1200 VS
Extraction fans please see page 54 !
HAZARDOUS SUBSTANCES CABINETS WITH TROUGH-SHAPED SHELVES (TYPE 90) Hazardous substances
cabinets (Type 90)
Whole construction tested and approved by a recognizedmaterials testing institute as per EN 14470-1 (Type 90) witha fire resistance >90 minutesInsulation according to DIN 4102 Outer body powder-coated steel sheet, RAL 7035- light grey, doors either inRAL 7035 - light grey or RAL 1007 - daffodil yellowInner body made of HPL-coated sheets - RAL 7035 Stainless steel base plate Pull-out shelves with automatic return ensure great working safety,height adjustable at intervals of 64 mm Automatic thermal closing mechanism if fire occurs• Doors and drawers after temperature increase to ≤ 50°C and• Inlet and outlet channels after temperature increaseto 70°C (±10°C)
DN 75 ventilation connection for exhaust air extraction Operation complies with TRbF 20-L (approved even withoutexhaust air connection!) Grounding connection in accordance with BGR 132 (avoidanceof sources of ignition) Markings according to EN 14470-1 / TRbF 20, Annex L / ISO 3864 Levelling feet for installing cabinet horizontallyDoors with cylinder lock (simultaneous closing)
Approved for storage of flammable liquids at the workplace
as per EN 14470-1 (Typ 90) und TRbF 20 - L
With inner fittings:
Either with base trough (BW), perforated cover
plate (LB) and troughs (EN), trough-shaped
shelves (AZB)*, disposal compartment (ESF)
With central dividing panel
Automatic thermal closing mechanism
SiS Type 90 / 1200 ES MI, Art.-No. B80-2556-B, RAL 7035,incl. 6 pull-out shelves (left) and 3 pull-out shelves + 1 disposal compartment (right)
Accessories Material Art.-No. (Type VS) Art.-No. (Type ES)Perforated cover plate for trough-shaped shelf steel sheet B80-2582-B B80-2582-B
Perforated cover plate for trough-shaped shelf stainless steel V2A B80-2583-B B80-2583-B
Perforated cover plate for disposal compartment steel sheet - B80-2594-B
Perforated cover plate for disposal compartment stainless steel V2A - B80-2595-B
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
Model SiS Type 90 / 1200 VS MI SiS Type 90 / 1200 VS MI SiS Type 90 / 1200 ES MI SiS Type 90 / 1200 ES MIExternal dimensions W x D x H in mm 1190 x 598 x 1935 1190 x 598 x 1935 1190 x 598 x 1935 1190 x 598 x 1935
Internal dimensions W x D x H in mm 1087 x 430 x 1700 1087 x 430 x 1700 1087 x 430 x 1700 1087 x 430 x 1700
Weight in kg 532 521 529 526
Doors 2 2 2 2
Inner fittings Dividing Dividing Dividing Dividingpanel panel panel panel
left: 6 x AZB left: 6 x AZB left: 6 x AZB left: 1 x ESFright: 6 x AZB right: 3 x EN right: 1 x ESF 3 x AZB
1 x BW 3 x AZB right: 1 x ESF1 x LB 3 x AZB
Outer body: RAL 7035 - light grey Material inner fittings
Art.-No., doors: RAL 7035 - light grey steel sheet B80-2548-B B80-2552-B B80-2556-B B80-2560-B
Art.-No., doors: RAL 7035 - light grey stainless steel V2A B80-2549-B B80-2553-B B80-2557-B B80-2561-B
Art.-No., doors: RAL 1007 - daffodil yellow steel sheet B80-2550-G B80-2554-G B80-2558-G B80-2562-G
Art.-No., doors: RAL 1007 - daffodil yellow stainless steel V2A B80-2551-G B80-2555-G B80-2559-G B80-2563-G
* max. load 30 kg per shelf with load uniformly distributed
45
SIS TYPE 90 / 1200 VS / ES
HAZARDOUS SUBSTANCES CABINETS WITH TROUGH-SHAPED SHELVES (TYPE 90)
Hazardous substances
cabinets (Type 90)
46
Whole construction tested and approved by a recognized materials
testing institute as per EN 14470-1 (Type 90) with a fire
resistance >90 minutes
Insulation according to DIN 4102
Outer body powder-coated steel sheet in
• RAL 7035 – light grey
Inner body made of HPL-coated sheets - RAL 7035
Automatic thermal closing mechanism if fire occurs
• Door and drawer after temperature increase to ≤ 50°C and
• Inlet and outlet channels after temperature increase to 70°C (±10°C)
DN 80 ventilation connection for exhaust air extraction in rear panel
Operation complies with TRbF 20-L (approved even without exhaust air
connection!)
Grounding connection in acc. with BGR 132 (avoidance of sources of ignition)
Marking according to EN 14470-1 / TRbF 20, Annex L / ISO 3864
Door / drawer* with cylinder lock
Door type FT hinged right as standard
Inner width with pulled-out drawer approx. 250 mm
Approved for the storage of flammable liquids at the workplace as per
EN 14470-1 (Type 90) and TRbF 20 - L
Allows hazardous substances to be stored where they are used:
under the fume cupboard, workbench, etc.
Safety cabinets with inner fittings:
AUS Type 90 / 600-500 FT
1 x Base trough (volume 12 litres)
1 x Perforated cover plate as 1st storing level
AUS Type 90 / 600-500 SF
1 x Base trough (volume 12 litres)
1 x Perforated cover plate as 1st storing level
AUS Type 90 / 600-500 FT, Art.-No. B80-2897-G
AUS Type 90 / 600-500 SF, Art.-No. B80-2895-G
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
AUS TYPE 90 / 600-500
Model AUS Type 90 / 600-500 FT AUS Type 90 / 600-500 SF
External dimensions W x D x H in mm 577 x 500 x 600 577 x 500 x 600
Internal dimensions W x D x H in mm 485 x 362 x 514 485 x 362 x 514
Weight in kg 89 88
Door hinged right 1 -
Drawer - 1
Outer body: RAL 7035 - light grey Material inner fittings
Art.-No., door / drawer: RAL 7035 - light grey steel sheet B80-2897-A B80-2895-A
Art.-No., door / drawer: RAL 7035 - light grey stainless steel V2A B80-2921-A B80-2922-A
Art.-No., door / drawer: RAL 1007 - daffodil yellow steel sheet B80-2897-G B80-2895-G
Art.-No., door / drawer: RAL 1007 - daffodil yellow stainless steel V2A B80-2921-G B80-2922-G
Accessories Material Art.-No. Art.-No.
Shelf steel sheet B80-2933-A -
Shelf stainless steel V2A B80-2934-A -
additional pull-out shelf steel sheet - B80-2929-A
additional pull-out shelf stainless steel V2A - B80-2930-A
Socle height 35 mm steel sheet B80-2931-A B80-2931-A
Socle, perforated height 35 mm steel sheet B80-2932-A B80-2932-A
AUS Type 90 / 600-500 FT,Art.-No. B80-2897-G,with additional shelf,available as accessory
* max. load 30 kg per shelf with load uniformly distributed
SAFETY UNDERBENCH CABINETS as per EN 14470-1 (TYPE 90)Hazardous substances
cabinets (Type 90)
Model AUS Type 90 / 600 FT AUS Type 90 / 600 SF
External dimensions W x D x H in mm 577 x 570 x 600 577 x 570 x 600
Internal dimensions W x D x H in mm 485 x 432 x 514 485 x 432 x 514
Weight in kg 92 95
Door hinged right 1 -
Drawer - 1
Outer body: RAL 7035 - light grey Material inner fittings
Art.-No., door / drawer: RAL 7035 - light grey steel sheet B80-2800-A B80-2801-A
Art.-No., door / drawer: RAL 7035 - light grey stainless steel V2A B80-2919-A B80-2920-A
Art.-No., door / drawer: RAL 1007 - daffodil yellow steel sheet B80-2800-G B80-2801-G
Art.-No., door / drawer: RAL 1007 - daffodil yellow stainless steel V2A B80-2919-G B80-2920-G
Accessories Material Art.-No. Art.-No.
Shelf steel sheet B80-2802-A -
Shelf stainless steel V2A B80-2803-A -
additional pull-out shelf steel sheet - B80-2927-A
additional pull-out shelf stainless steel V2A - B80-2928-A
Socle height 35 mm steel sheet B80-2804-A B80-2804-A
Socle, perforated height 35 mm steel sheet B80-2805-A B80-2805-A
Whole construction tested and approved by a recognized materials
testing institute as per EN 14470-1 (Type 90) with a fire
resistance >90 minutes
Insulation according to DIN 4102
Outer body powder-coated steel sheet in
• RAL 7035 – light grey
Inner body made of HPL-coated sheets - RAL 7035
Automatic thermal closing mechanism if fire occurs
• Door and drawer after temperature increase to ≤ 50°C and
• Inlet and outlet channels after temperature increase to 70°C (±10°C)
DN 80 ventilation connection for exhaust air extraction in rear panel
Operation complies with TRbF 20-L (approved even without exhaust
air connection!)
Grounding connection in accordance with BGR 132 (avoidance of
sources of ignition)
Marking according to EN 14470-1 / TRbF 20, Annex L / ISO 3864
Door / drawer* with cylinder lock
Door type FT hinged right as standard
Inner width with pulled-out drawer approx. 320 mm
Approved for the storage of flammable liquids at the workplace as
per EN 14470-1 (Type 90) and TRbF 20 - L
Allows hazardous substances to be stored where they are used:
under the fume cupboard, workbench, etc.
Safety cabinets with inner fittings:
AUS Type 90 / 600 FT
1 x Base trough (volume 12 litres)
1 x Perforated cover plate as 1st storing level
AUS Type 90 / 600 SF
1 x Base trough (volume 12 litres)
1 x Perforated cover plate as 1st storing level
AUS Type 90 / 600 FT, Art.-No. B80-2800-A,with perforated socle, available as accessory
AUS Type 90 / 600 SF, Art.-No. B80-2801-A,with perforated socle, available as accessory
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
AUS TYPE 90 / 600
Extraction fans please see page 54 !
* max. load 30 kg per shelf with load uniformly distributed
SAFETY UNDERBENCH CABINETS as per EN 14470-1 (TYPE 90)
47
Hazardous substances
cabinets (Type 90)
Whole construction tested and approved by a recognized materials
testing institute as per EN 14470-1 (Type 90) with
a fire resistance >90 minutes
Insulation according to DIN 4102
Outer body powder-coated steel sheet in
• RAL 7035 – light grey
Inner body made of HPL-coated sheets - RAL 7035
Automatic thermal closing mechanism if fire occurs
• Door/s and drawer/s after temperature increase to ≤ 50°C and
• Inlet and outlet channels after temperature increase to 70°C (±10°C)
DN 80 ventilation connection for exhaust air extraction in rear panel
Operation complies with TRbF 20-L (approved even without exhaust
air connection!)
Grounding connection in accordance with BGR 132 (avoidance of sources
of ignition)
Marking according to EN 14470-1 / TRbF 20, Annex L / ISO 3864
Door/s / drawer/s* with cylinder lock
Inner width with pulled-out drawer approx. 250 mm
Approved for the storage of flammable liquids at the workplace as per
EN 14470-1 (Type 90) and TRbF 20 - L
Allows hazardous substances to be stored where they are used:
under the fume cupboard, workbench, etc.
Safety cabinets with inner fittings:
All models
Base trough (volume Type FT 1 x 18 litres,
Type SF 1 x 18 litres, Type FT SF 2 x 11 litres,
Type SF SF 2 x 11 litres)
Perforated cover plate as 1st storing level
AUS Type 90 / 880-500 FT SF, Art.-No. B80-2903-LG,with additional shelf, available as accessory
AUS Type 90 / 880-500 FT, Art.-No. B80-2901-G,with additional shelf, available as accessory
.
.
.
.
.
.
.
.
.
.
.
.
.
AUS TYPE 90 / 880-500
Model AUS Type 90 / 880-500 FT AUS Type 90 / 880-500 SF AUS Type 90 / 880-500 FT SF AUS Type 90 / 880-500 SF SFExternal dimensions W x D x H in mm 877 x 500 x 600 877 x 500 x 600 877 x 500 x 600 877 x 500 x 600
Internal dimensions W x D x H in mm 785 x 362 x 514 785 x 362 x 514 374 / 374 x 362 x 514 374 / 374 x 362 x 514
Weight in kg 125 128 126 128
Doors 2 - 1 -
Drawers - 1 1 2
Outer body: RAL 7035 - light grey Materialinner fittings
Art.-No., door/s / drawer/s: RAL 7035 - light grey steel sheet B80-2901-A B80-2902-A B80-2903-L B80-2904-A
Art.-No., door/s / drawer/s: RAL 7035 - light grey stainless steel V2A B80-2923-A B80-2924-A B80-2925-L B80-2926-A
Art.-No., door/s / drawer/s: RAL 1007 - daffodil yellow steel sheet B80-2901-G B80-2902-G B80-2903-LG B80-2904-G
Art.-No., door/s / drawer/s: RAL 1007 - daffodil yellow stainless steel V2A B80-2923-G B80-2924-G B80-2925-LG B80-2926-G
Accessories Material Art.-No. Art.-No. Art.-No. Art.-No.Shelf steel sheet B80-2937-A - B80-2939-A -
Shelf stainless steel V2A B80-2938-A - B80-2940-A -
additional pull-out shelf steel sheet - B80-2941-A B80-2943-A B80-2943-A
additional pull-out shelf stainless steel V2A - B80-2942-A B80-2944-A B80-2944-A
Socle height 35 mm steel sheet B80-2935-A B80-2935-A B80-2935-A B80-2935-A
Socle, perforated height 35 mm steel sheet B80-2936-A B80-2936-A B80-2936-A B80-2936-A
AUS Type 90 / 880-500 SF, Art.-No. B80-2902-G
* max. load 30 kg per shelf with load uniformly distributed
48
SAFETY UNDERBENCH CABINETS as per EN 14470-1 (TYPE 90)
Extraction fans please see page 54 !
Hazardous substances
cabinets (Type 90)
SAFETY UNDERBENCH CABINETS as per EN 14470-1 (TYPE 90)
49
Whole construction tested and approved by a recognized materials
testing institute as per EN 14470-1 (Type 90) with
a fire resistance >90 minutes
Insulation according to DIN 4102
Outer body powder-coated steel sheet in
• RAL 7035 – light grey
Inner body made of HPL-coated sheets - RAL 7035
Automatic thermal closing mechanism if fire occurs
• Door/s and drawer/s after temperature increase to ≤ 50°C and
• Inlet and outlet channels after temperature increase to 70°C (±10°C)
DN 80 ventilation connection for exhaust air extraction in rear panel
Operation complies with TRbF 20-L (approved even without exhaust
air connection!)
Grounding connection in accordance with BGR 132 (avoidance of sources
of ignition)
Marking according to EN 14470-1 / TRbF 20, Annex L / ISO 3864
Door/s / drawer/s* with cylinder lock
Inner width with pulled-out drawer
approx. 320 mm
Approved for the storage of flammable liquids at the workplace as per
EN 14470-1 (Type 90) and TRbF 20 - L
Allows hazardous substances to be stored where they are used:
under the fume cupboard, workbench, etc.
Safety cabinets with inner fittings:
AUS Type 90 / 880 FT, Art.-No. B80-2864-A
AUS Type 90 / 880 SF, Art.-No. B80-2865-A
AUS Type 90 / 880 FTbelow a fume hood
.
.
.
.
.
.
.
.
.
.
.
AUS TYPE 90 / 880
AUS Type 90 / 880 SF SF, Art.-No. B80-2916-G
* max. load 30 kg per shelf with load uniformly distributed
All models
Base trough (volume Type FT 1 x 18 litres,
Type SF 1 x 18 litres, Type FT SF 2 x 11 litres,
Type SF SF 2 x 11 litres)
Perforated cover plate as 1st storing level
.
.
Model AUS Type 90 / 880 FT AUS Type 90 / 880 SF AUS Type 90 / 880 FT SF AUS Type 90 / 880 SF SFExternal dimensions W x D x H in mm 877 x 570 x 600 877 x 570 x 600 877 x 570 x 600 877 x 570 x 600
Internal dimensions W x D x H in mm 785 x 432 x 514 785 x 432 x 514 374 / 374 x 432 x 514 374 / 374 x 432 x 514
Weight in kg 133 138 135 135
Doors 2 - 1 -
Drawers - 1 1 2
Outer body: RAL 7035 - light grey Materialinner fittings
Art.-No., door/s / drawer/s: RAL 7035 - light grey steel sheet B80-2864-A B80-2865-A B80-2914-A B80-2916-A
Art.-No., door/s / drawer/s: RAL 7035 - light grey stainless steel V2A B80-2945-A B80-2946-A B80-2947-A B80-2948-A
Art.-No., door/s / drawer/s: RAL 1007 - daffodil yellow steel sheet B80-2864-G B80-2865-G B80-2914-G B80-2916-G
Art.-No., door/s / drawer/s: RAL 1007 - daffodil yellow stainless steel V2A B80-2945-G B80-2946-G B80-2947-G B80-2948-G
Accessories Material Art.-No. Art.-No. Art.-No. Art.-No.Shelf steel sheet B80-2816-A - B80-2953-A -
Shelf stainless steel V2A B80-2817-A - B80-2954-A -
additional pull-out shelf steel sheet - B80-2949-A B80-2951-A B80-2951-A
additional pull-out shelf stainless steel V2A - B80-2950-A B80-2952-A B80-2952-A
Socle height 35 mm steel sheet B80-2866-A B80-2866-A B80-2866-A B80-2866-A
Socle, perforated height 35 mm steel sheet B80-2867-A B80-2867-A B80-2867-A B80-2867-A
Hazardous substances
cabinets (Type 90)
50
Whole construction tested and approved by a recognized materials
testing institute as per EN 14470-1 (Type 90) with a fire
resistance >90 minutes
Insulation according to DIN 4102
Outer body powder-coated steel sheet in
• RAL 7035 - light grey
Inner body made of HPL-coated sheets - RAL 7035
Automatic thermal closing mechanism if fire occurs
• Door/s and drawer/s after temperature increase to ≤ 50°C and
• Inlet and outlet channels after temperature increase to 70°C (±10°C)
DN 80 ventilation connection for exhaust air extraction in rear panel
Operation complies with TRbF 20-L (approved even without exhaust
air connection!)
Grounding connection in accordance with BGR 132 (avoidance of
sources of ignition)
Marking according to EN 14470-1 / TRbF 20, Annex L / ISO 3864
Door/s / drawer/s* with cylinder lock
Inner width with pulled-out drawer approx. 250 mm
Approved for the storage of flammable liquids at the workplace as per
EN 14470-1 (Type 90) and TRbF 20 - L
Allows hazardous substances to be stored where they are used:
under the fume cupboard, workbench, etc.
Safety cabinets with inner fittings:
AUS Type 90 / 1100-500 FT, Art.-No. B80-2899-A,with additional shelf, available as accessory
AUS Type 90 / 1100-500 SF SF,Art.-No. B80-2900-A
AUS Type 90 / 1100-500 SF,Art.-No. B80-2898-A,with additional pull-out shelf,available as accessory
AUS Type 90 / 1100-500 FT SF, Art.-No. B80-2890-LG
.
.
.
.
.
.
.
.
.
.
.
AUS TYPE 90 / 1100-500
Model AUS Type 90 / 1100-500 FT AUS Type 90 / 1100-500 SF AUS Type 90 / 1100-500 FT SF AUS Type 90 / 1100-500 SF SFExternal dimensions W x D x H in mm 1100 x 500 x 600 1100 x 500 x 600 1100 x 500 x 600 1100 x 500 x 600
Internal dimensions W x D x H in mm 1008 x 362 x 515 1008 x 362 x 515 484 / 484 x 362 x 514 484 / 484 x 362 x 514
Weight in kg 142 146 144 146
Doors 2 - 1 -
Drawers - 1 1 2
Outer body: RAL 7035 - light grey Materialinner fittings
Art.-No., door/s / drawer/s: RAL 7035 - light grey steel sheet B80-2899-A B80-2898-A B80-2890-L B80-2900-A
Art.-No., door/s / drawer/s: RAL 7035 - light grey stainless steel V2A B80-2959-A B80-2960-A B80-2961-L B80-2962-A
Art.-No., door/s / drawer/s: RAL 1007 - daffodil yellow steel sheet B80-2899-G B80-2898-G B80-2890-LG B80-2900-G
Art.-No., door/s / drawer/s: RAL 1007 - daffodil yellow stainless steel V2A B80-2959-G B80-2960-G B80-2961-LG B80-2962-G
* max. load 30 kg per shelf with load uniformly distributed
Accessories Material Art.-No. Art.-No. Art.-No. Art.-No.Shelf steel sheet B80-2965-A - B80-2933-A -
Shelf stainless steel V2A B80-2966-A - B80-2934-A -
additional pull-out shelf steel sheet - B80-2967-A B80-2929-A B80-2929-A
additional pull-out shelf stainless steel V2A - B80-2968-A B80-2930-A B80-2930-A
Socle height 35 mm steel sheet B80-2963-A B80-2963-A B80-2963-A B80-2963-A
Socle, perforated height 35 mm steel sheet B80-2964-A B80-2964-A B80-2964-A B80-2964-A
All models
Base trough (volume Type FT 1 x 26 litres,
Type SF 1 x 26 litres, Type FT SF 2 x 12 litres,
Type SF SF 2 x 12 litres)
Perforated cover plate as 1st storing level
.
.
SAFETY UNDERBENCH CABINETS as per EN 14470-1 (TYPE 90)Hazardous substances
cabinets (Type 90)
SAFETY UNDERBENCH CABINETS as per EN 14470-1 (TYPE 90)
51
Whole construction tested and approved by a recognized materials
testing institute as per EN 14470-1 (Type 90) with a fire
resistance >90 minutes
Insulation according to DIN 4102
Outer body powder-coated steel sheet in
• RAL 7035 - light grey
Inner body made of HPL-coated sheets - RAL 7035
Automatic thermal closing mechanism if fire occurs
• Door/s and drawer/s after temperature increase to ≤ 50°C and
• Inlet and outlet channels after temperature increase to 70°C (±10°C)
DN 80 ventilation connection for exhaust air extraction in rear panel
Operation complies with TRbF 20-L (approved even without exhaust
air connection!)
Grounding connection in accordance with BGR 132 (avoidance of
sources of ignition)
Marking according to EN 14470-1 / TRbF 20, Annex L / ISO 3864
Door/s / drawer/s* with cylinder lock
Inner width with pulled-out drawer approx. 320 mm
Approved for the storage of flammable liquids at the workplace as per
EN 14470-1 (Type 90) and TRbF 20 - L
Allows hazardous substances to be stored where they are used:
under the fume cupboard, workbench, etc.
AUS Type 90 / 1100 FT, Art.-No. B80-2806-A,with socle, available as accessory
AUS Type 90 / 1100 SF SF, Art.-No. B80-2809-A, RAL 7035,with perforated socle, available as accessory
AUS Type 90 / 1100 SF,Art.-No. B80-2807-A,with perforated socle,available as accessory
AUS Type 90 / 1100 FT SF,Art.-No. B80-2808-A,with additional shelf andperforated socle, availableas accessory
.
.
.
.
.
.
.
.
.
.
.
AUS TYPE 90 / 1100
* max. load 30 kg per shelf with load uniformly distributed
Extraction fans please see page 54 !
Accessories Material Art.-No. Art.-No. Art.-No. Art.-No.Shelf steel sheet B80-2810-A - B80-2802-A -
Shelf stainless steel V2A B80-2811-A - B80-2803-A -
additional pull-out shelf steel sheet - B80-2967-A B80-2927-A B80-2927-A
additional pull-out shelf stainless steel V2A - B80-2968-A B80-2928-A B80-2928-A
Socle height 35 mm steel sheet B80-2812-A B80-2812-A B80-2812-A B80-2812-A
Socle, perforated height 35 mm steel sheet B80-2813-A B80-2813-A B80-2813-A B80-2813-A
Model AUS Type 90 / 1100 FT AUS Type 90 / 1100 SF AUS Type 90 / 1100 FT SF AUS Type 90 / 1100 SF SFExternal dimensions W x D x H in mm 1100 x 570 x 600 1100 x 570 x 600 1100 x 570 x 600 1100 x 570 x 600
Internal dimensions W x D x H in mm 1008 x 432 x 514 1008 x 432 x 514 484 / 484 x 432 x 514 484 / 484 x 432 x 514
Weight in kg 152 155 154 155
Doors 2 - 1 -
Drawers - 1 1 2
Outer body: RAL 7035 - light grey Materialinner fittings
Art.-No., door/s / drawer/s: RAL 7035 - light grey steel sheet B80-2806-A B80-2807-A B80-2808-A B80-2809-A
Art.-No., door/s / drawer/s: RAL 7035 - light grey stainless steel V2A B80-2955-A B80-2956-A B80-2957-A B80-2958-A
Art.-No., door/s / drawer/s: RAL 1007 - daffodil yellow steel sheet B80-2806-G B80-2807-G B80-2808-G B80-2809-G
Art.-No., door/s / drawer/s: RAL 1007 - daffodil yellow stainless steel V2A B80-2955-G B80-2956-G B80-2957-G B80-2958-G
Hazardous substances
cabinets (Type 90)
Safety cabinets with inner fittings:
All models
Base trough (volume Type FT 1 x 26 litres,
Type SF 1 x 26 litres, Type FT SF 2 x 12 litres,
Type SF SF 2 x 12 litres)
Perforated cover plate as 1st storing level
.
.
52
Whole construction tested and approved by a recognized material testing
institute as per EN 14470-1 (Type 90) with a fire resistance >90 minutes
Insulation according to DIN 4102
Outer body powder-coated steel sheet in
• RAL 7035 - light grey
Inner body made of HPL-coated sheets - RAL 7035
Automatic thermal closing mechanism if fire occurs
• Doors and drawer/s after temperature increase to ≤ 50°C and
• Inlet and outlet channels after temperature increase to 70°C (±10°C)
DN 80 ventilation connection for exhaust air extraction in rear panel
Operation complies with TRbF 20-L (approved even without exhaust
air connection!)
Grounding connection in acc. with BGR 132 (avoidance of sources of ignition)
Marking according to EN 14470-1 / TRbF 20, Annex L / ISO 3864
Doors / drawer/s* with cylinder lock
Inner width with pulled-out drawer approx. 250 mm
Approved for the storage of flammable liquids at the workplace as per
EN 14470-1 (Type 90) and TRbF 20 - L
Allows hazardous substances to be stored where they are used:
under the fume cupboard, workbench, etc.
Safety cabinets with inner fittings:AUS Type 90 / 1400-500 SF, Art.-No. B80-2907-G
AUS Type 90 / 1400-500 SF SF,Art.-No. B80-2909-G
AUS Type 90 / 1400-500 SF SF, Art.-No. B80-2909-A
.
.
.
.
.
.
.
.
.
.
.
AUS TYPE 90 / 1400-500
* max. load 30 kg per shelf with load uniformly distributed
Extraction fans please see page 54 !
Model AUS Type 90 / 1400-500 FT AUS Type 90 / 1400-500 SF AUS Type 90 / 1400-500 FT SF AUS Type 90 / 1400-500 SF SFExternal dimensions W x D x H in mm 1400 x 500 x 600 1400 x 500 x 600 1400 x 500 x 600 1400 x 500 x 600
Internal dimensions W x D x H in mm 785 / 485 x 362 x 514 374/374/485 x 362 x 514 785 / 485 x 362 x 514 785 / 485 x 362 x 514
Weight in kg 190 197 192 197
Doors 3 - 2 -
Drawers - 3 1 2
Outer body: RAL 7035 - light grey Materialinner fittings
Art.-No., doors / drawer/s: RAL 7035 - light grey steel sheet B80-2906-A B80-2907-A B80-2908-A B80-2909-A
Art.-No., doors / drawer/s: RAL 7035 - light grey stainless steel V2A B80-2969-A B80-2970-A B80-2971-A B80-2972-A
Art.-No., doors / drawer/s: RAL 1007 - daffodil yellow steel sheet B80-2906-G B80-2907-G B80-2908-G B80-2909-G
Art.-No., doors / drawer/s: RAL 1007 - daffodil yellow stainless steel V2A B80-2969-G B80-2970-G B80-2971-G B80-2972-G
Accessories Material Art.-No. Art.-No. Art.-No. Art.-No.Shelf left steel sheet B80-2937-A - B80-2937-A -
Shelf right steel sheet B80-2933-A - - -
Shelf left stainless steel V2A B80-2938-A - B80-2938-A -
Shelf right stainless steel V2A B80-2934-A - - -
additional pull-out shelf left (left+centre Type SF) steel sheet - B80-2943-A - B80-2941-A
additional pull-out shelf right steel sheet - B80-2929-A B80-2929-A B80-2929-A
additional pull-out shelf left (left+centre Type SF) stainless steel V2A - B80-2944-A - B80-2942-A
additional pull-out shelf right stainless steel V2A - B80-2930-A B80-2930-A B80-2930-A
Socle height 35 mm steel sheet B80-2973-A B80-2973-A B80-2973-A B80-2973-A
Socle, perforated height 35 mm steel sheet B80-2974-A B80-2974-A B80-2974-A B80-2974-A
All models
Base trough (volume
- Type FT 1 x 18 litres, 1 x 12 litres;
- Type SF 2 x 11 litres, 1 x 12 litres;
- Type FT SF 1 x 18 litres, 1 x 12 litres;
- Type SF SF 1 x 18 litres, 1 x 12 litres)
Perforated cover plate as 1st storing level
.
.
Hazardous substances
cabinets (Type 90)
SAFETY UNDERBENCH CABINETS as per EN 14470-1 (TYPE 90)
Whole construction tested and approved by a recognized material
testing institute as per EN 14470-1 (Type 90) with a fire resistance
>90 minutes
Insulation according to DIN 4102
Outer body powder-coated steel sheet in
• RAL 7035 - light grey
Inner body made of HPL-coated sheets - RAL 7035
Automatic thermal closing mechanism if fire occurs
• Doors and drawer/s after temperature increase to ≤ 50°C and
• Inlet and outlet channels after temperature increase to 70°C (±10°C)
DN 80 ventilation connection for exhaust air extraction in rear panel
Operation complies with TRbF 20-L (approved even without exhaust
air connection!)
Grounding connection in acc. with BGR 132 (avoidance of sources
of ignition)
Marking according to EN 14470-1 / TRbF 20, Annex L / ISO 3864
Doors / drawer/s* with cylinder lock
Inner width with pulled-out drawer approx 320 mm
Approved for the storage of flammable liquids at the workplace as per
EN 14470-1 (Type 90) and TRbF 20 - L
Allows hazardous substances to be stored where they are used:
under the fume cupboard, workbench, etc.
AUS Type 90 / 1400 FT SF, Art.-No. B80-2814-A,with additional shelf and perforated socle, available as accessory
AUS Type 90 / 1400 SF SF, Art.-No. B80-2815-A
.
.
.
.
.
.
.
.
.
.
.
AUS TYPE 90 / 1400
AUS Type 90 / 1400 FT, Art.-No. B80-2917-A
SAFETY UNDERBENCH CABINETS as per EN 14470-1 (TYPE 90)
53
* max. load 30 kg per shelf withload uniformly distributed
Accessories Material Art.-No. Art.-No. Art.-No. Art.-No.Shelf left steel sheet B80-2816-A - B80-2816-A -
Shelf right steel sheet B80-2802-A - - -
Shelf left stainless steel V2A B80-2817-A - B80-2817-A -
Shelf right stainless steel V2A B80-2803-A - - -
additional pull-out shelf left (left+centre Type SF) steel sheet - B80-2951-A - B80-2949-A
additional pull-out shelf right steel sheet - B80-2927-A B80-2927-A B80-2927-A
additional pull-out shelf left (left+centre Type SF) stainless steel V2A - B80-2952-A - B80-2950-A
additional pull-out shelf right stainless steel V2A - B80-2928-A B80-2928-A B80-2928-A
Socle height 35 mm steel sheet B80-2818-A B80-2818-A B80-2818-A B80-2818-A
Socle, perforated height 35 mm steel sheet B80-2819-A B80-2819-A B80-2819-A B80-2819-A
Model AUS Type 90 / 1400 FT AUS Type 90 / 1400 SF AUS Type 90 / 1400 FT SF AUS Type 90 / 1400 SF SFExternal dimensions W x D x H in mm 1400 x 570 x 600 1400 x 570 x 600 1400 x 570 x 600 1400 x 570 x 600
Internal dimensions W x D x H in mm 785 / 485 x 432 x 514 374/374/485 x 432 x 514 785 / 485 x 432 x 514 785 / 485 x 432 x 514
Weight in kg 201 208 202 208
Doors 3 - 2 -
Drawers - 3 1 2
Outer body: RAL 7035 - light grey Materialinner fittings
Art.-No., doors / drawer/s: RAL 7035 - light grey steel sheet B80-2917-A B80-2918-A B80-2814-A B80-2815-A
Art.-No., doors / drawer/s: RAL 7035 - light grey stainless steel V2A B80-2975-A B80-2976-A B80-2977-A B80-2978-A
Art.-No., doors / drawer/s: RAL 1007 - daffodil yellow steel sheet B80-2917-G B80-2918-G B80-2814-G B80-2815-G
Art.-No., doors / drawer/s: RAL 1007 - daffodil yellow stainless steel V2A B80-2975-G B80-2976-G B80-2977-G B80-2978-G
Hazardous substances
cabinets (Type 90)
Safety cabinets with inner fittings:
All models
Base trough (volume
- Type FT 1 x 18 litres, 1 x 12 litres;
- Type SF 2 x 11 litres, 1 x 12 litres;
- Type FT SF 1 x 18 litres, 1 x 12 litres;
- Type SF SF 1 x 18 litres, 1 x 12 litres)
Perforated cover plate as 1st storing level
.
.
54
Installation example: Models 1-3
Installation example: Models 5-7
Installation example: Models 4 + 8
Connection work to be done by customer!
Our safety cabinets for the storage of hazardous substances are provided with a DN 75 / DN 80 exhaust air connection. The forced
ventilation can be carried out by one of our standard extraction fans or by a suitable in-house air extraction system. The exhaust air is
to be discharged from the building into a hazard-free zone.
The operation of safety cabinets for the storage of flammable liquids as per EN 14470-1 is governed by TRbF 20-L. If the cabinets are
used without forced ventilation then an EX zone (Zone 2) must be set up and maintained around the cabinet at a:
- distance of 2.5 m around the cabinet, and
- 50 cm high
For this reason, and also to avoid the presence of hazardous vapours in the atmosphere near the cabinet, we always recommend that
safety cabinets are operated with an extraction fan (min. air exchange rate 10 times per hour) for proper operation in accordance with
TRbF 20-L! If an extraction fan is to be used in an EX-endangered zone then it is essential that an EX-proof version is used!
MODELS 1 - 8
Models 1 - 3
Extraction from individual safety cabinets
For mounting directly on the storeLAB® safety cabinet - complicated connections from
the extraction fan to the safety cabinet are no longer necessary!
- Not suitable for fume hood underbenches
- With mounting plate for easy mounting on cabinet roof - suction side
of fan is connected
Models 5 - 7
Extraction from several safety cabinets
Extraction fan with mounting base, for separate installation beside (e.g. on wall of
room) or on the safety cabinet
- Suitable for all storeLAB® safety cabinets
- With mounting plate for easy mounting on cabinet roof
Models 4 + 8
Plug-in versions
Easy extraction fan connection (suction side) with DN 75 flexible aluminium tubing,
with earthed plug and 2 m connection cable.
- Not suitable for fume hood underbenches
- For mounting on safety cabinet
Model 8 with exhaust air monitoring:
- Extraction fan operation checked by monitoring the air flow
- Acoustic message if extraction fan stops working or safety cabinet ventilation
openings become blocked
Description Model 1 Model 2 Model 3 Model 4 Model 5 Model 6 Model 7 Model 8
EX-proof NO NO YES NO NO NO YES NO
Electricity supply 230 V 400 V 400 V 230 V 230 V 400 V 400 V 230 V
Weight (kg) 6,0 6,0 6,0 7,5 6,0 6,0 6,0 7,5
Art.-No. B80-2839-A B80-2840-A B80-2841-A B80-2842-A B80-2844-A B80-2845-A B80-2846-A B80-2843-A
All extraction fans comply with EU Directive 94/9/EU (ATEX)
If the safety cabinet is used together with an extractionfan then it is no longer necessary to set up andmaintain an EX-zone around the safety cabinet!
EXTRACTION FANS FOR STORELAB® MODELSHazardous substances
cabinets (Type 90)
55
Hazardous substances
cabinets (Type 90)
HAZARDOUS SUBSTANCES FILTER ATTACHMENT FOR SAFETY CABINETS
If a LACONT Hazardous Substances Filter Attachment GFA Basic is used then it is no longer necessary to maintain an
explosion-endangered zone around the safety cabinet (see TRbF 20 Annex L # 4.2.), as proved by a test report issued by
a recognised testing, monitoring and certification office (test laboratory accredited by the German Accreditation
Council DAR)
Exhaust ducts venting in the open air are no longer necessary, so no cost-intensive installation work is required
No room atmosphere pollution due to virtually 100% filtering of all solvent vapours – employee health protection!
Low service and maintenance costs
Functioning, display and operation:
The LACONT Hazardous Substances Filter Attachment Basic reacts to coarse
particulate contaminants (dust, etc.) as well as to strong contamination of
the exhaust air by hydrocarbon vapours and gases. A saturated filter is
indicated by warning LEDs.
Hydrocarbon vapours are removed from the exhaust air from the cabinet by passing it through the built-in active charcoal filter so that
the air can be discharged directly into the room atmosphere. The special feature of the filter is its tandem structure. If a breakthrough
is detected then the second built-in filter will retain the breakthrough for a period of up to 14 days.
In order to ensure hazard-free working conditions the LaCont hazardous substances filter attachment Basic should be serviced and its
functions checked by an expert at least once per year. The tandem active charcoal filter should be replaced during this check.
Benefits:
The LACONT Hazardous Substances Filter Attachment GFA Basic works
with forced air circulation and is used for the technical ventilation of
storeLAB® safety cabinets Type 30 / Type 90 as per EN 14470-1 for the
storage of flammable liquids.
Because of its quiet operation the LaCont hazardous substances filter
attachment GFA Basic is ideal for direct use at the workplace.
.
.
.
.
Housing: Powder-coated sheet steel, RAL 7035, light grey
Ext. dimensions (width x depth x height): 310 mm x 510 mm x 210 mm
Motor performance: 0,03 kW
Nominal voltage: 230 V
Frequency: 50 Hz
Current consumption: 0,2 A
Noise level: <42 dB (A)
Net weight (without filter): 10 kg
Weight of active charcoal filter: 3 kg
Volume flow (at cabinet): 25 m3/h
Technical data:
Description Art.-No.
Hazardous Substances Filter Attachment GFA Basic B80-2880-A
Attachment adapter for storeLAB® Type 30/90 cabinets B80-2883-A
Attachment adapterfor storeLAB® CHS 950 / SiBox B80-2885-A
Attachment adapter for storeLAB® SiS-FAS Type 90/900 B80-2884-A
Attachment adapter for storeLAB® SiS-FAS Type 90/1550 included
Further attachment adapters for oldersafety cabinets available on request!
56
HAZARDOUS SUBSTANCES CABINETS as per EN 14470-1 (TYPE 90)
Whole construction tested and approved by BAM Berlin by
explosion test
Fire resistance by test certificate of >90 minutes (acc. to
EN 14470-1 - type 90)
Insulation acc. to DIN 4102
Outer body: RAL 7035 - light grey
Doors: RAL 1007 - daffodil yellow
Two doors with cylinder lock – special safety lock system
Stainless steel base plate
Inner body made of HPL-coated sheets RAL 7035 - light grey
Markings acc. to EN 14470-1 / TRbF 20-L / ISO 3864
Approved for storage of Airbags and seat belt tensioning units of
class PT1 and PT2 as well as storage group 1.4
The storage of explosive substances and devices containing explosive substances, such as airbag and seat belt tensioning units,
is not permitted in the direct vicinity of the workplace. An exception is made for storage devices that have been specially
designed for this purpose.
With interior fittings:
Four storing levels height adjustable at intervalsof 25 mmCorrosion resistance by galvanized shelf system Complete electrostatic interconnection of allcomponents and inner fittings by built-in groundingcable harness - grounding connection on cabinetroof
.
.
.
.
.
.
.
.
.
.
.
.
AIRBAG - CABINET TYPE 90 / 900 AIR
Fulfils the requirements of the second directive to the
Explosive Substances Law § 2Annex No. 4 for the storage ofsmall amounts as per Test
Report BAM Berlin !
Model SiS Type 90 / 900 Air
Outer dimensions W x D x H in mm 900 x 900 x 1935
Inner dimensions W x D x H in mm 797 x 735 x 1580
Weight kg 530
Wing doors 2
Art.-No., outer body: RAL 7035 - light grey,wing doors: RAL 1007 - daffodil yellow B80-2879-A
Accessory Art.-No.
Socle, approved by recognized materials testing instituteW x D x H mm = 900 x 900 x 113 B80-2713-A
SiS Type 90 / 900 Air, Art.-No. B80-2879-A
SiS Type 90 / 900 Air, Art.-No. B80-2879-A
Approved
by BAM Berlin
Hazardous substances
cabinets (Type 90)
57
SAFETY CABINETS FOR DOCUMENTS as per EN 14470-1 (TYPE 90)
For reduction and prevention of the fire load in
corridors, emergency exits and escape routes
.
.
.
.
.
.
.
.
.
Whole construction tested and approved by a
recognized materials testing institute as per
EN 14470-1 (Type 90) with a fire resistance
>90 minutes
Insulation according to DIN 4102
Outer body powder-coated steel sheet
RAL 7035 - light grey
Inner body made of HPL-coated sheets - RAL 7035
Levelling feet for installing cabinet horizontally
Stainless steel base plate
Doors with cylinder lock (simultaneous closing)
Available with or without automatic door closing
device
Inner fittings:
4 shelves, powder-coated RAL 7035 - light grey
DKS Typ 90 / 1200: 5 storage levels à 13 A4-files
DKS Typ 90 / 1400: 5 storage levels à 15 A4-files
Model DKS Type 90 / 1200 DKS Type 90 / 1200 DKS Type 90 / 1400 DKS Type 90 / 1400
External dimension W x D x H mm 1190 x 598 x 1935 1190 x 598 x 1935 1400 x 598 x 1935 1400 x 598 x 1935
Internal dimensions W x D x H mm 1087 x 430 x 1766 1087 x 430 x 1741 1297 x 430 x 1766 1297 x 430 x 1741
Doors 2 2 2 2
Weight in kg 475 480 620 625
Storage levels 5 5 5 5Storing height mm 343 338 343 338
Storage capacity 5 x 13 Ring Files A4 5 x 13 Ring Files A4 5 x 15 Ring Files A4 5 x 15 Ring Files A4
Automatic door closing device NO YES NO YES
Material inner fittings
Art.-No., RAL 7035 - light grey steel sheet B80-6301-A B80-6302-A B80-6303-A B80-6307-A
Accessory Material Art.-No. Art.-No. Art.-No. Art.-No.
Additional shelf steel sheet B80-6305-A B80-6305-A B80-6306-A B80-6306-A
SAFETY CABINETS FOR DOCUMENTS DKS TYPE 90 / 1200 AND DKS TYPE 90 / 1400
DKS Type 90 / 1200, Art.-No. B80-6301-A
DKS Type 90 / 1200, Art.-No. B80-6301-A
- cabinets with automatic door closing device: withfire chamber test as per EN 14470-1 (90 min.),
- cabinets without automatic door closing device:construction based on EN 14470-1
Hazardous substances
cabinets (Type 90)
58
STORAGE OF PRESSURISED GAS CYLINDERS
What has changed since the introduction of EN 14470-2 (Safety cabinets for pressurised gas cylinders)?
Changes occurred for manufacturers and users of pressurised gas safety cabinets when European Standard EN 14470-2 came into force
in 2006, as now for the first time in the history of safety cabinets this standard was to be implemented throughout Europe:
• The classification of the fire resistance capability has been
divided into 4 classes:
G 15 = ≥ 15 minutes
G 30 = ≥ 30 minutes
G 60 = ≥ 60 minutes
G 90 = ≥ 90 minutes
EN 14470-2 describes the construction and safety criteria for safety cabinets
to be used in laboratories for the storage of pressurized gas cylinders at
normal room temperatures.
However, in Germany TRG 280 (Technical Rules for Gases) applies as the
basis for the storage of pressurized gas cylinders.
According to TRG 280 the following principles must be observed (further
details and requirements can be found in TRG 280):
STORAGE (TRG 280 – 2.2):
Storage is to be understood as keeping a stock of pressurised gas cylinders. Storage is not to be understood as connecting up
pressurised gas cylinders for emptying them, or for keeping them ready for service and maintenance purposes.
AVAILABILITY (TRG 280 – 2.3):
Availability is to be understood as keeping filled pressurised gas cylinders at the places intended for their use as reserve cylinders,
either connected to or ready to be connected to a gas supply device, to the extent that is necessary for allowing continuation of
work. It is also to be understood as keeping filled pressurized gas cylinders at the workplace for manual gas supply.
STORAGE in ROOMS (TRG 280 – 5.2):
Rooms intended for the storage of pressurised gas cylinders must be separated from neighbouring rooms by at least
fire-retarding components Fire-retarding components are required if fire and explosion hazards exist in neighbouring
rooms not used for the storage of pressurized gas cylinders.
FIRE-RETARDING in the meaning of TRG (TRG 280 – 2.11) is the fire performance of components as per DIN 4102 for an exposure
period of 30 minutes (fire resistance class F 30).
FIRE-RESISTANT in the meaning of TRG (TRG 280 – 2.12) is the fire performance of components as per DIN 4102 for an exposure
period of 90 minutes (fire resistance class F 90).
BGR 120 – Guidelines for Laboratories (formerly ZH 1/119):
5.4.3.1 To avoid risks pressurised gas cylinders should be stored outside the laboratories if possible and the gases supplied to the
workplaces via permanently laid pipelines. If this is not possible, and if pressurised gas cylinders have to be used in laboratories
with an increased fire risk then, in the case of fire, the pressurised gas cylinders must be protected against excessive heat by taking
appropriate protective measures (storage in gas cylinder safety cabinets as per DIN 12925-2 / EN 14470-2).
Even today it is not entirely clear which fire resistance capabilities apply in laboratories for users in Germany. The current European
harmonisation of requirements and regulations is increasingly transferring the responsibility to the user. Today as manufacturers we
offer safety cabinets with a fire resistance capability of G 30.
This is in accordance with the previous state of the art in Germany, as per DIN 12925-2. The corresponding protective aims must
be achieved: (EN 14470-2 – Introduction: "The fire resistance capability should allow personnel to leave the workroom and allow
fire-fighters to reach the location before the pressurized gas cylinders become unstable").
PRACTICAL INFORMATION
CONTENTS GAS CYLINDER SAFETY CABINETS
59
Gas Cylinder Safety Cabinets ...
Gas cylinder safety cabinets as per EN 14470-2 (G 30) . . . . . . . . . . Page 60
Gas cylinder safety cabinets as per TRG 280. . . . . . . . . . . . . . . . . . . Page 61
Further optional storages for gas cylinders
in cabinets / containers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Page 62
PRACTICAL INFORMATION - Storage of pressurised
gas cylinders . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Page 58
Branded qu
ality
MADE by LA
CONT
Gas cylinder
cabinets
60
Gas cylinder
cabinets
Extraction fans please see page 54 !
GAS CYLINDER SAFETY CABINETS
SiZ G30/600, Art.-No. B80-5015-C
Model SiZ G30/600 SiZ G30/900 SiZ G30/1200 SiZ G30/1400
External dimensionsW x D x H in mm 595 x 598 x 2015 900 x 598 x 2015 1190 x 598 x 2015 1400 x 598 x 2015
Intern. dim. W x D x H in mm 492 x 430 x 1785 797 x 430 x 1785 1087 x 430 x 1785 1297 x 430 x 1785
Capacity up to two (2) up to three (3) up to four (4) up to four (4)50 l gas cylinders 50 l gas cylinders 50 l gas cylinders 50 l gas cylinders
Door/s 1 (DIN right) 2 2 2
Weight (kg) 295 375 475 610
Outer body:RAL 7035 – light grey
Art.-No., door/s:RAL 7035 - light grey B80-5015-C B80-5016-C B80-5017-C B80-5018-C
Art.-No., door/s:RAL 1007 - daffodil yellow B80-5015-G B80-5016-G B80-5017-G B80-5018-G
*) Shelf across whole width of safety cabinet, powder-coated steel sheet in RAL 7035 - light grey.
Approved for storage of pressurized gas cylinders
at the workplace as per EN 14470-2 (G 30)
SiZ G30/1200, Art.-No. B80-5017-C, with side-mounted shelf, optional
SiZ G30 / 600 - 1400
Whole construction tested and approved by
recognized materials testing institute as per
EN 14470-2
Insulation according to DIN 4102
Outer body powder-coated steel sheet in
RAL 7035 - light grey, door/s either in
RAL 7035 - light grey or RAL 1007 - daffodil
yellow
Inner body made of HPL-coated
sheets - RAL 7035 - light grey
Stainless steel base plate
Automatic thermal closing mechanism if fire
occurs: inlet and outlet channels after
temperature increase to 70°C (±10°C)
DN 75 ventilation connection for exhaust air
extraction
Levelling feet for installing cabinet horizontally
Door/s with cylinder lock
With inner fittings:
• 1 x stainless steel floor plate
• 1 x holder for 50-litre gas cylinder per
cylinder place
• 2 x horizontal C-rails for attaching
gas fittings
.
.
.
.
.
.
.
.
.
.
Accessories
Shelf* B80-5010-C B80-5011-C B80-5012-C B80-5013-C
Side-mounted shelf suitable for all models B80-5014-C
Drive-in ramp, stainless steel V2A suitable for all models B80-2833-A
TRG 1400, Art.-No. C27-3301-B
View of roof with prepared tubing lead-throughs andexhaust connection
TRG 700, Art.-No. C27-3300-B
TRG 700 / TRG 1050 / TRG 1400
Model TRG 700 TRG 1050 TRG 1400
External dimensions W x D x H in mm 700 x 400 x 2150 1050 x 400 x 2150 1400 x 400 x 2150
Door/s 1 DIN right 2 2
Weight (kg) 65 90 120
No. of lead-throughs 5 8 10
Capacity 50-litre gas cylinder up to 2 up to 3 up to 4
Art.-No., outer body:RAL 7035 - light grey C27-3300-B C27-3302-B C27-3301-B
Outer body made of galvanized steel sheet, powder-coated inRAL 7035 - light greyHighly corrosion-resistantDepending on defined fire load can also be used inside buildings - see TRG 280, BGR 120 and TRGS 526Storage and operation without having to observe safety zonesas per TRG 280Roof inclined to the rearStainless steel floor to avoid impact damageStainless steel base plateAir inlet and outlet via ventilation slots in thedoor and under the protecting roofCabinet roof prepared for connection to anin-house technical exhaust system (DN 75) Door/s with cylinder lock Marked with hazard symbol W 19 Gas safety cabinets complete with fittings:• 2 x vertical C-rails on rear wall• 2 x horizontal C-rails for attaching gas fittings, height-adjustable• 1 x cylinder holder (clamping strap) for 50-litre cylinder• Openings in roof for tubing lead-troughs (25 mm dia.)with blank stoppers
.
.
.
.
.
.
.
.
.
.
.
.
TRG 1050, Art.-No. C27-3302-B TRG-cabinets with optional acrylicglass window
GAS CYLINDER SAFETY CABINETS as per TRG 280
61
Gas cylinder
cabinets
For storage of pressurized gas cylinders inside and outside
building as per TRG 280
62
FURTHER OPTIONS FOR STORAGE OF GAS CYLINDERS
GAS CYLINDER STOREHOUSES
GAS CYLINDER CABINETS
GAS CYLINDER CONTAINER
Gas cylinder
cabinets
LACONTUmwelttechnik GmbH
Halberstädter Str. 20a • D-39435 Egeln
Phone +49 (0) 39 268 / 98 96 - 0
Fax +49 (0) 39 268 / 98 96 - 29
E-Mail: info@lacont.de
Internet: http://www.lacont.de
FURTHER PRODUCTS LACONT
Gas cylinder storing systems
PE / steel collection trough systems
Shelving systems for hazardous substances
Open air storage systems / Projects
Fire protection container systems
Safety containers
Authorized LACONT dealers in Europe
Norway
Denmark
SwedenFinland
Lithuania
the Netherlands
Belgium
France
Ireland
Portugal Spain
Italy
AustriaSwitzerland
Poland
Romania
Bulgaria
Greece
Serbia
Czechia Slovakia
Hungary
Slovenia