Post on 29-Mar-2018
2014-03 002.001 ENG
Head Office & Factory153, Jeongdong-ro, Seongsan-gu, Changwon-si, Gyeongsangnam-do
Tel +82 55 280 9206, 9299 Fax +82 55 210 9804
www.wiamachine.co.kr
Overseas Sales Team16F, 37, Cheoldobangmulgwan-ro, Uiwang-si, Gyeonggi-do
Tel +82 31 593 8173
L300 SeriesHYUNDAI WIA CNC Turning Center
The CNC Turning Center Series, developd by Hyundai Wia, a Korean manufacturer of traditional machine tools, on the strength of its accumulated knowhow and state-of-the-art technology, is designed to maximize productivity by taking into account the need for high speed, sturdiness and accuracy.
Technical Leader
10″ 12″ Sub8″ Standard Long TurnMill
Chuck Bed Turret
● ●
● ●
● ● ●
● ● ●
● ● ● ●
● ● ● ●
● ●
● ●
● ● ●
● ● ●
● ● ● ●
ITEM
L300A
L300LA
L300MA
L300LMA
L300MSA
L300LMSA
L300C
L300LC
L300MC
L300LMC
L300MSC
Heavy-Duty CNC Turning Center
L300 Series● Sturdiness secured through the adoption of an all Axis box guide
● Highly accurate direct link and highly sturdy all-in-one structure
● Highly accurate pretension double-anchor method
● Minimized heat deformation in the main spindle
● Gearless type main spindle models are all equipped with a mill turret.
● Integrated process realized through adoption of 8″ sub spindle - models equipped with sub spindle
01 Basic FeaturesThe Best Productivity Popular 10 inch CNC Turning CenterL300 Series
Main SpindleThe main spindle has become sturdier by enlarging its diameter and thickness. Its sturdiness and accuracy are maintained by the high-accuracy angular ball bearings that have been adopted.
BOX GuidewayBox guideways provide unsurpassed long-term rigidity and accuracy, even under the heaviest of cutting operations
Ball ScrewStable feed perfectly parallel to the guide is secured by fastening the both edges of the ball screw using the double-anchor method. In particular, a ball screw with a large diameter was used and a preload applied, which resulted in reinforced sturdiness and resistance to heat deformation.
04
0302
High Precision, High Rigidity All in One StructureThe L300 features a 60° slant bed design which was developed using finite element analysis (FEA) to absorb vibration and minimize thermal growth, ensures a stable platform for powerful, precise cutting capabilities.
01
BMT Turret (MillTurret)The BMT turret, with 4 screws solidly fastening the holder, shows outstanding performance in powerful cutting and is capable of machining high-value products using rotation tools.
Ball-screwDeviation(Diameter)
Number of Positioning Repeated (Time)
Deviation (μm)
◉ Travel(X/Z/ZB axis)
L300MSA : 290/750/700mm L300LMSA : 290/1,350/1,200mm L300MSC : 335/750/700mm
◉ Spindle Speed
L300A : 3,600[3,500]rpm L300C/LC : 3,000rpm L300MA/LMA : 3,500rpm L300MC/LMC : 3,000rpm
L300MSA/LMSA : Main 3,500rpm, Sub 4,000rpm L300MSC : Main 3,000rpm, Sub 4,000rpm
◉ Spindle Output (Max.)
L300A : 22[22]kW L300C/LC : 26kW L300MA/LMA/MC/LMC : 22kW
L300MSA/LMSA/MSC : Main 22kW, Sub 11kW
◉ Spindle Torque (Max.)
L300A : 755.8[783.2]N.m L300C/LC : 1,098.7N.m L300MA/LMA : 493.2N.m
L300MA/LMA : 786.9N.m L300MSA/LMSA : Main 493.2N.m, Sub 140N.m
L300MSC : Main 786.9N.m, Sub 140N.m [■]:Siemens
Basic Features
01
03
04
02
04+
05
L3
00 S
ERIE
SC
nC
Tu
rn
ing
Cen
Ter
HYu
nD
Ai W
iAM
ACH
ine
TOO
L
02 High-Precision SpindleLong Lasting High Accuracy & Excellent PerformanceCNC Turning CenterL300 Series
Gear Type Spindle A two-step driving method has been applied inside the main spindle of standard turning models such as None Mill Turret L300A/C/LA/LC, which resulted in powerful torque at slow speeds and stable rotation at high speeds.
Gearless Type Spindle The main spindle of the models equipped with Mill Turrets has a gearless drive and makes minimal noise and maintains outstanding surface finishes.
Main SpindleThe main spindle has a wide scope of constant power and the same structure as that of a high-speed lathe. It is designed to minimize thermal displacement and is capable of highly accurate uniform cutting even during consecutive high-speed operations.
In particular, the enhanced processing and assembling accuracy of the outer ring assembly of the bearings enables the spindle unit to maintain accuracy for a long time.
Tail StockThe large (MT#5) tail stock ensures high accuracy even during heavy, powerful cutting. The quill’s 100mm of feed can be operated by foot pedal, or programed. The quill is also able to move manually by using the JOG button or MPG.
Sub SpindleThe 8˝ sub spindle with integrated C axis, had been designed to minimize thermal growth, even under long, continuous cutting paths, to ensure high precision and accuracy.
Easy Work Coordinate SettingUpon completion of the processing of the outer diameter of an object, the sub-spindle receives the object from the main spindle while rotating with the latter at the same speed and can process the object with a tool for processing the reverse side (the base holder.)
C-Axis ControlThe C axis is capable of 0.001° control with 100 rpm positioning speed. Contour machining with the C axis is also possible, enabling the operator to machine outer shapes and pockets using rotating tools.
0.001°
Taper : MT#5Quill Dia. : Ø100
Travel : 750/1,350 mm
Quill Weight : 740 kgf
Chuck : 8″C-axis Indexing : 0.001°
Motor : 11/7.5kW
Spindle Bore : Ø45
06+
07
L3
00 S
ERIE
SC
nC
Tu
rn
ing
Cen
Ter
HYu
nD
Ai W
iAM
ACH
ine
TOO
L
Spindle
• Dialogue-type programming, simple and convenient
• Effective specifications for small quantity batch production
• Step-by-step operation possible without knowledge of the DIN/ISO code
Shop Turn
• 3-dimensional (3D) confirmation (an option) of the completed processing configuration of the NC program is possible.
• Offers standards for 2-dimensional simulation (2D.)
• Possible to confirm the simulation of the NC grogram during processing.
3D Simulation
• Easy to install/uninstall an option (Example: barfeeder and chip conveyor, etc.)
• Possible to install in one motion without revision of individual perimeters.
• A spate list is unnecessary as option items are indicated with letters.
Easy Extend
Easy input/output of a program is possible as a USB memory card, a CF memory card and LAN can all be used.
RJ 45 Ethernet
USB 2.0
Compact Flash Card
Variable Communication Port
If the ISO Dialect (G291) is ordered, JIS-based G-code programs can be used. (Standard)
SIEMENS Technology SIEMENS Communication Function
ISO CodeProgramming
Spindle Speed (r/min)
18.5
22.2
861271 1,083 3,500
783.2
652.7
246.2205.2
22kW (30min)18.5kW (Cont)
783.2N.m (30min)
246.2N.m (30min)
652.7N.m (Cont.)
205.2N.m (Cont.)
L300MSA/LMSA/MSC Sub Spindle
L300AThe characteristics of 1PH8 Series Motors include a maximum concentricity of 10㎛, unsurpassed quality and a short operating period, which make them stand out as superb machine tools in quality and performance.
1PH8 Spindle Motor
Spindle Output/Torque Diagram
08+
09
L3
00 S
ERIE
SC
nC
Tu
rn
ing
Cen
Ter
HYu
nD
Ai W
iAM
ACH
ine
TOO
L
Spindle Speed (r/min)
18.5
22.2
861271 1,083 3,500
783.2
652.7
246.2205.2
22kW (30min)18.5kW (Cont)
783.2N.m (30min)
246.2N.m (30min)
652.7N.m (Cont.)
205.2N.m (Cont.)
L300MSA/LMSA/MSC Sub Spindle
FANUCSpindle
03 Servo TurretHigh speed, High Accuracy, Highly Reliable Servo Turret L300 Series
TurretL300 Series has a high performance AC Servo Motor attached which enhances its process reliability. Especially 3-piece coupling is attached, which makes split accuracy better.
Powerful tool clamping using hydraulics minimizes tool tip deviation due to load, which displays excellent performance during heavy duty cutting.
◉ Number of Tool : 12EA
◉ Tool Size (O.D/I.D)
□25 / Ø50
Servo Turret
L300ASeries
L300CSeries
10+
11
L3
00 S
ERIE
SC
nC
Tu
rn
ing
Cen
Ter
HYu
nD
Ai W
iAM
ACH
ine
TOO
L
Turret
Mill Tool HolderMachining capabilities have been increased with the addition of a Straight Milling Head, which can remove material from the side of the workpiece, and an Angular Milling Head, which can perform I.D. operations.
A wide variety of additional tool holders can further enhance the machines with capabilities that include drilling and tapping, among others.The BMT Turret adopted for Mill turret out of the L300 series
solidly fastens the holder with 4 screws and shows outstanding performance in milling, drilling and tapping during a heavy cutting operation.
◉ Output : 5.5/3.7 kW
◉ Speed (rpm) : 4,000 r/min
◉ Collet size :Ø20 (ER32)◉ Live Tool Type :BMT65P
Angular Milling HeadStraight Milling Head
Mill Turret (BMT)
04 Machining CapabilityExcellent Performance, High Accuracy CuttingCNC Turning CenterL300 Series
❖ The above result might be different by types of processing circumstance
Machining Variation (L300MSA/L300LMSA)
Sample Workpiece
L300A
Face Cutting
Drilling & Tapping
End Milling
End Milling
MainSpindle
MainSpindle
MainSpindle
MainSpindle
SubSpindle
SubSpindle
SubSpindle
SubSpindle
Milling
Milling
O.D Cutting
I.D Cutting
I.D Threading
Drilling
MainSpindle SubSpindle
Turning
Turning
Turning
Main Spindle
MainSpindle
MainSpindle
SubSpindle
SubSpindle
SubSpindle
Turning
Turning〈Material〈JIS〉:S45C(Carbon steel〉 Drilling 〈Material〈JIS〉:S45C(Carbon steel〉
Processing diameterSide cutting depthCutting speedSpindle rpmForwarding speedChip discharge
Ø28012mm110m/min280r/mim0.45mm/rev594cc/min
Work diameterDrill diameterCutting speedSpindle rpmForwarding speedChip discharge
Ø70Ø40140m/min895r/mim0.4mm/rev469cc/min
Cutting (O.D) U-Drilling
12+
13
L3
00 S
ERIE
SC
nC
Tu
rn
ing
Cen
Ter
HYu
nD
Ai W
iAM
ACH
ine
TOO
L
Machining
Milling
Milling
05 Smart SystemSoftware for Smart Operating and MachiningL300 Series
Machine Monitoring
Energy SavingIntelligent Machining
Easy Programming
HW-MMS HW
-ESS
HW-DPRO T/TM
User Friendly
HW-TM
HYUNDAI WIA Smart System for CNC Turning Center
User Convenience
HW-eDNC
HW-MCG
HW-PGi F (HYUNDAIWIAProgrammingGuideiforFanucSystem)(StandardwhenapplyingFANUC31/32i)
Realistic 3D solid animationProgramming simulation
Example of easy programmingEasy programming interactively
without code
Engraving CycleProgramming with only entering text by
controlling C-axis
14+
15
L3
00 S
ERIE
SC
nC
Tu
rn
ing
Cen
Ter
HYu
nD
Ai W
iAM
ACH
ine
TOO
L
Faster processing programming and enhanced processing accuracy are possible through HYUNDAI WIA Smart System. It also maximizes productivity through equipment monitoring and environment-friendly software.
HYUNDAI WIA Smart System
HW-TMHYUNDAIWIAToolMonitoring
This is an equipment-monitoring software which checks the overload, attrition and possible damage of equipment by analyzing the spindles and the output load of the feed shaft generated during a processing operation.
(FANUC + SIEMENS)
HW-DPRO T/TMHYUNDAIWIADialoguePROgramTurn/TurnMill
Using a dialogue method, this software makes it easy to work out a program for a lathe processing operation with complicated configurations. (Can be installed on a PC.)
(FANUC)
HW-MMSHYUNDAIWIAMachineMonitoringSystem
This software is for remote control monitoring of equipment status (mobile, PC.) It checks and manages the state of multiple pieces of equipment and the progress of processing on a real time basis.
(FANUC + SIEMENS)
HW-ESSHYUNDAIWIAEnergySavingSystem
This is an environment-friendly power reduction software reducing the standby power unnecessarily wasted in the equipment waiting for a processing operation.
(FANUC)
HW-eDNCHYUNDAIWIAethernetDirectNumericalControl
This software transmits and receives the CNC of processing equipment, the processing program and the NC data on a PC through the internet or serial communications, while managing the processing program of the CNC memory.
(FANUC + SIEMENS)
HW-MCGHYUNDAIWIAMachineGuidance
NC loading type software offering user-convenience functions like operating equipment, maintenance and monitoring of managing equipment
(FANUC)
USB Port (HWFANUCiSeries&Siemens828D)Convenience is increased when inputting and outputting program. Because it is now capable of using USB port in addition to current way like CF memory card or LAN
06 Automation SystemVarious Devices for User Friendly
L300 Series
Robot Automation System
Raw Material In Work Stocker Clamping
Finishing Out Work Stocker 1st Machining
Banking on the precision technologies accumulated through its machine tool manufacturing experience and the process management capabilities gained through its automobile parts manufacturing operations, Hyundai Wia is providing services in factory automation. .
Robot System Machining Process
Raw Material In Work Stocker 1st Machining
Finishing Out Work Stocker 2nd Machining
Construction of high speed gantry loaders is possible as well as the construction of flexible automation cells by a work stocker. Optimization of the installation space is also possible. In particular, excellent machining effect is achieved during continuous machining of both sides of the same or different work
Gantry Loader Machining Process
Turn Over
L3
00 S
ERIE
SC
nC
Tu
rn
ing
Cen
Ter
HYu
nD
Ai W
iAM
ACH
ine
TOO
L
16+
17
Automation
Gantry Loader System
A(LA) MA(LMA) MSA(LMSA) ● ● ● ● ● ● ● ● ● ● ● ● ☆ ☆ ☆
● ● ● ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ● ● ● ○ ○ ○ ☆ ☆ ☆ ○ - - - ○ ○ ○ ○ ○ ● ● ● ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ☆ ☆ ○ ○ ○ ○ ○ ○ ☆ ☆ ☆ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ☆ ☆ ☆ ○ ○ ○ ○ ○ ○ ☆ ☆ ☆ ☆ ☆ ☆ ○ ○ ○ ☆ ☆ ☆ ○ ○ ○ ☆ ☆ ☆ ○ ○ ○ ○ ○ ○ ○ ○ ○ - - ○ - - ○ ☆ ☆ ☆ ☆ ☆ ☆ ● ● ● ● ● ● ☆ ☆ ☆ ○ ○ ○ ○ ○ ○ ○ ○ - ○ ○ ○ ☆ ☆ ☆
● ● ● ☆ ☆ ☆ ☆ ☆ ☆
Door Inter-LockTotal Splash GuardChuck Pressure Failure DetectorBack Spin Torque Limiter (BST)Torque LimiterElectric DeviceCall LightCall LightCall Light & BuzzerElectric Cabinet LightRemote MPGSpindle Load MeterSpindle Speed MeterWork CounterTotal CounterTool Counter
Multi Tool Counter
Electric Circuit Breaker
ABS Encoder
AVR (Auto Voltage Regulator)
Transformer
Auto Power OffMeasurementQ-SetterAutomatic Q-SetterWork Close Confirmation Device(Only for Special Chuck)Work Setter (REnISHAW/MARPOSS)
Linear Scale
Coolant Level Sensor (Only for Chip Conveyor)EnvironmentAir ConditionerDehumidifierOil Mist CollectorOil Skimmer (Only for Chip Conveyor)MQL (Minimal Quantity Lubrication)Fixture & Automation
Auto Door
Auto Shutter (Only for Automatic System)Sub Operation PannelBar Feeder InterfaceBar Feeder (FEDEK)Extra M-Code 4eaAutomation Interface
I/O Extension (In & OUT)
Parts Catcher
Sub Sp. Work Pusher (Pneumatic Type)Turret Work Pusher (For Automation)Parts ConveyorHyd. DeviceStandard Hyd. CylinderStandard Hyd. UnitS/WMachine Guidance (HW-MCG : FAnUC)Tool Monitoring (HW-TM : FAnUC)DnC software (HW-eDnC : FAnUC)Interactive ProgramEnergy Saving System (HW-ESS : FAnUC)Machine Monitoring System (HW-MMS : FAnUC)ETCTool BoxCustomized ColorCAD & CAM
1Color : ■3Color : ■■■3Color : ■■■B
LED TypeLED TypeDigitalDigitalDigital6ea9ea
FAnUCSIEMEnS
30kVA35kVA
TACOSMC
X axisZ axis
StandardHigh Speed
16Contact32ContactMain SP.Sub SP.
Hollow35bar/20ℓ
need Munsel no.
L300 Series Standard & Optional
Main SpindleHollow Chuck 3 JawMain SpindleSolid Chuck 3 JawSub SpindleHollow Chuck 3 JawSub SpindleSolid Chuck 3 JawStandard Soft Jaw (1set)Chuck Clamp Foot Switch2 Steps Hyd, Pressure DeviceSpindle Inside StopperCs-Axis (0.001°)Chuck Open/Close Confirmation Device2 Steps Chuck Foot SwitchSub Spindle Foot SwitchTurretTool HolderMill TurretStraight Milling Head (Radial)Angular Milling Head (Axial)SUB Angular Milling Head (Axial)Straight Milling Head (Radial)Angular Milling Head (Axial)SUB Angular Milling Head (Axial)Boring SleeveDrill SocketU-Drill HolderU-Drill Holder SleeveO.D Extension HolderSwivel HeadTail Stock & Steady RestQuill Type Tail StockBuilt in Tail StockProgramable Tail StockManual Steady RestManual Hyd. Steady Rest Standard Live CenterHigh Precesion Live Center2 Steps Tail Stock Pressure SystemQuill Forward/Reverse Confirmation DeviceTail Stock Foot SwitchCoolant & Air BlowStandard Coolant (nozzle)Chuck Coolant (Upper Chuck)Gun CoolantSpindle Thru Coolant (Only for Special Chuck)Thru Coolant for Live ToolChuck Air Blow (Upper Chuck)Sub Spindle Air BlowTail Stock Air Blow (Upper Tail Stock)Turret Air BlowAir GunSpindle Thru Air Blow (Only for Special Chuck)
High Pressure Coolant
Power Coolant System (For Automation)Coolant ChillerChip Disposal
Coolant Tank
Chip Conveyor(Hinge/Scraper)
Special Chip Conveyor (Drum Filter)
Chip Wagon
10″12″10″12″8″10″8″10″
RadialCollet Type,1eaCollet Type,2eaCollet Type,1eaAdapter TypeAdapter TypeAdapter Type
For Out-Dia
6Bar20Bar
220ℓ270ℓFront(Right)Rear(Rear)Rear(Rear)
Standard(180ℓ)Swing(200ℓ)Swing Large Size(330ℓ)Large Size(330ℓ)Costomized
Spindle & Chuck Safety Device
● : Standard ○ : Option ☆ : Prior Consultation - Non Application
A(LA) MA(LMA) MSA(LMSA) ● ● ● ○ ○ ○ ○ ○ ○ ○ ○ ○ - - ● - - - - - ○ - - - ● ● ● ● ● ● ○ ○ ○ ☆ ☆ ☆ ○ ● ● ● ● ● ○ ○ ○ - - ☆ ● ● ● - ● ● - ● ● - ● ● - - ● - ○ ○ - ○ ○ - - ○ ● ● ● ● ● ● ○ ○ ○ ○ ○ ○ ○ - - - ☆ ☆ ● ● - ○ ○ - ○ ○ - ○ ○ ☆ ○ ○ - ● ● - ☆ ☆ - ☆ ☆ - ○ ○ - ○ ○ - ● ● ● ○ ○ ○ ○ ○ ○ ☆ ☆ ☆ - - - ○ ○ ○ - - ○ ○ ○ - ☆ ☆ ☆ ○ ○ ○ ☆ ☆ ☆ ○ ○ ○ ○ ○ ○ ☆ ☆ ☆ ☆ ☆ ☆ ● - - - ● ● ○ ○ ○ A (○) MA (○) - LA (-) LMA (-) - ☆ ☆ ☆ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ☆ ☆ ☆
The specifications as above will only serve as a reference.
SPECIFICATIONS
C(LC) MC(LMC) MSC ● ● ● ● ● ● ● ● ● ● ● ● ☆ ☆ ☆
● ● ● ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ● ● ● ●(○) ●(○) ○ ☆ ☆ ☆ ○ ○ ○ ○ ○ ○ ● ● ● ○ ☆ ☆ ○ ○ ○ ○ ○ ○ ○ ☆ ☆ ○ ○ ○ ○ ○ ○ ☆ ☆ ☆ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ☆ ☆ ☆ ○ ○ ○ ○ ○ ○ ☆ ☆ ☆ ☆ ☆ ☆ ○ ○ ○ ☆ ☆ ☆ ○ ○ ○ ☆ ☆ ☆ ○ ○ ○ ○ ○ ○ ○ ○ ○ - - ○ - - ○ ☆ ☆ ☆ ☆ ☆ ☆ ● ● ● ● ● ● ☆ ☆ ☆ ○ ○ ○ ○ ○ - ○ ○ ○ ○ ○ ○ ☆ ☆ ☆ ● ● ● ☆ ☆ ☆ ☆ ☆ ☆
Door Inter-LockTotal Splash GuardChuck Pressure Failure DetectorBack Spin Torque Limiter (BST)Torque LimiterElectric DeviceCall LightCall LightCall Light & BuzzerElectric Cabinet LightRemote MPGSpindle Load MeterSpindle Speed MeterWork CounterTotal CounterTool Counter
Multi Tool Counter
Electric Circuit Breaker
ABS Encoder
AVR (Auto Voltage Regulator)TransformerAuto Power OffMeasurementQ-SetterAutomatic Q-SetterWork Close Confirmation Device(Only for Special Chuck)Work Setter (REnISHAW/MARPOSS)
Linear Scale
Coolant Level Sensor (Only for Chip Conveyor)EnvironmentAir ConditionerDehumidifierOil Mist CollectorOil Skimmer (Only for Chip Conveyor)MQL (Minimal Quantity Lubrication)Fixture & Automation
Auto Door
Auto Shutter (Only for Automatic System)Sub Operation PannelBar Feeder InterfaceBar Feeder (FEDEK)Extra M-Code 4eaAutomation Interface
I/O Extension (In & OUT)
Parts Catcher
Sub Sp. Work Pusher (Pneumatic Type)Turret Work Pusher (For Automation)Parts ConveyorHyd. DeviceStandard Hyd. CylinderStandard Hyd. UnitS/WMachine Guidance (HW-MCG : FAnUC)Tool Monitoring (HW-TM : FAnUC)DnC software (HW-eDnC : FAnUC)Interactive ProgramEnergy Saving System (HW-ESS : FAnUC)Machine Monitoring System (HW-MMS : FAnUC)ETCTool BoxCustomized ColorCAD & CAM
1Color : ■3Color : ■■■3Color : ■■■B
LED TypeLED TypeDigitalDigitalDigital6ea9ea
FAnUCSIEMEnS
35kVA
TACOSMC
XaxisZaxis
StandardHigh Speed
16Contact32ContactMain SP.Sub SP.
Hollow35bar/20ℓ
need Munsel no.
L300 Series Standard & Optional
Main SpindleHollow Chuck 3 JawMain SpindleSolid Chuck 3 JawSub SpindleHollow Chuck 3 JawSub SpindleSolid Chuck 3 JawStandard Soft Jaw (1set)Chuck Clamp Foot Switch2 Steps Hyd, Pressure DeviceSpindle Inside StopperCs-Axis (0.001°)Chuck Open/Close Confirmation Device2 Steps Chuck Foot SwitchSub Spindle Foot SwitchTurretTool HolderMill TurretStraight Milling Head (Radial)Angular Milling Head (Axial)SUB Angular Milling Head (Axial)Straight Milling Head (Radial)Angular Milling Head (Axial)SUB Angular Milling Head (Axial)Boring SleeveDrill SocketU-Drill HolderU-Drill Holder SleeveO.D Extension HolderSWIVEL HEADTail Stock & Steady RestQuill Type Tail StockBuilt in Tail StockProgramable Tail StockManual Steady RestManual Hyd. Steady RestStandard Live CenterHigh Precesion Live Center2 Steps Tail Stock Pressure SystemQuill Forward/Reverse Confirmation DeviceTail Stock Foot SwitchCoolant & Air BlowStandard Coolant (nozzle)Chuck Coolant (Upper Chuck)Gun CoolantSpindle Thru Coolant (Only for Special Chuck)Thru Coolant for Live ToolChuck Air Blow (Upper Chuck)Sub Spindle Air BlowTail Stock Air Blow (Upper Tail Stock)Turret Air BlowAir GunSpindle Thru Air Blow (Only for Special Chuck)
High Pressure Coolant
Power Coolant System (For Automation)Coolant ChillerChip DisposalCoolant Tank
Chip Conveyor(Hinge/Scraper)
Special Chip Conveyor (Drum Filter)
Chip Wagon
10"12"10"12"8"10"8"10"
RadialCollet Type,1eaCollet Type,2eaCollet Type,1eaAdapter TypeAdapter TypeAdapter Type
For Out-Dia
6Bar20Bar
220ℓFront(Right)Rear(Rear)Rear(Rear)
Standard(180ℓ)Swing(200ℓ)Swing Large Size(330ℓ)Large Size(330ℓ)Costomized
Spindle & Chuck Safety Device
● : Standard ○ : Option ☆ : Prior Consultation - Non Application
C(LC) MC(LMC) MSC - - - ● ● ● - - - ☆ ☆ ☆ - - ● - - - - - ☆ - - - ● ● ● ● ● ● ○ ○ ○ ☆ ☆ ☆ - ● ● ● ● ● ☆ ☆ ☆ - - ☆ ● ● ● - ● ● - ● ● - ● ● - - ● - ○ ○ - ○ ○ - - ○ ● ● ● ● ● ● ○ ○ ○ ○ ○ ○ ○ - - - ☆ ☆ ● ● - ○ ○ - ○ ○ - ○ ○ ☆ ○ ○ - ● ● - ☆ ☆ - ☆ ☆ - ○ ○ - ○ ○ - ● ● ● ○ ○ ○ ○ ○ ○ ☆ ☆ ☆ - - - ○ ○ ○ - - ○ ○ ○ - ☆ ☆ ☆ ○ ○ ○ ☆ ☆ ☆ ○ ○ ○ ○ ○ ○ ☆ ☆ ☆ ☆ ☆ ☆ ● ● ● ○ ○ ○ C (○) MC (○) - - LMC (-) - ☆ ☆ ☆ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ☆ ☆ ☆
The specifications as above will only serve as a reference.
18+
19
L3
00 S
ERIE
SC
nC
Tu
rn
ing
Cen
Ter
HYu
nD
Ai W
iAM
ACH
ine
TOO
L
SPECIFICATIONS
unit : mm(in)External Dimensions
SPECIFICATIONS
240(9.4)
3121(122.8) (L300A)
120(4.7)
3361(132.3) 300(11.8)
3481(137)(L300C/MA/MC) 1306(51.4)
80(3.1)
80(3.1)
3121(122.8) 300(11.8)
1917
.5(7
5.5)
R500
1300
(51.
2) (O
pt.)
1300(51.2)2055.5(80.9)
1095
(43.
1)(L
300A
/C/M
C/M
SC
)
487(19.1)(L300A/C/MC/MSC)
1200
(47.
2)
1200
(47.
2)
3586(141.1)(L300MSC)
3466(136.4)(L300MSA)
1098
.5(4
3.2)
(L30
0MA
/MS
A)
484(19)(L300MA/MSA)
975(38.3) 910(35.8) 888(34.9) 348(13.7)
(L30
0MS
A,M
SC
Exc
ept)
760(30)(DOOR OPEN)
4171(164.2) 300(11.8)
1094(43)
1200
(47.
2)
1917
.5(7
5.5)
R500
138
(5.4
)
2395(94.3) 570(22.4) 1206(47.5) 300(11.8)
484(19) (L300LMA/LMSA/LMC)10
98.5
(43.
2)(L
300L
MA
/LM
SA
/LM
C)
1095
(L30
0LA
/LC
)487(19.1) (L300LA/LC)
2058.5(81)
480(18.9) 840(33) 910(35.8) 930(36.6) 1011(39.8)
790(31.1)(DOOR OPEN)
560(22)(DOOR OPEN)
L300A/MA/MSA L300C/MC/MSC
unit : mm(in)External Dimensions
20+
21
L3
00 S
ERIE
SC
nC
Tu
rn
ing
Cen
Ter
HYu
nD
Ai W
iAM
ACH
ine
TOO
L
SPECIFICATIONS
240(9.4)
3121(122.8) (L300A)
120(4.7)
3361(132.3) 300(11.8)
3481(137)(L300C/MA/MC) 1306(51.4)
80(3.1)
80(3.1)
3121(122.8) 300(11.8)
1917
.5(7
5.5)
R500
1300
(51.
2) (O
pt.)
1300(51.2)2055.5(80.9)
1095
(43.
1)(L
300A
/C/M
C/M
SC
)
487(19.1)(L300A/C/MC/MSC)
1200
(47.
2)
1200
(47.
2)
3586(141.1)(L300MSC)
3466(136.4)(L300MSA)
1098
.5(4
3.2)
(L30
0MA
/MS
A)
484(19)(L300MA/MSA)
975(38.3) 910(35.8) 888(34.9) 348(13.7)
(L30
0MS
A,M
SC
Exc
ept)
760(30)(DOOR OPEN)
4171(164.2) 300(11.8)
1094(43)
1200
(47.
2)
1917
.5(7
5.5)
R500
138
(5.4
)
2395(94.3) 570(22.4) 1206(47.5) 300(11.8)
484(19) (L300LMA/LMSA/LMC)
1098
.5(4
3.2)
(L30
0LM
A/L
MS
A/L
MC
)10
95 (L
300L
A/L
C)
487(19.1) (L300LA/LC)
2058.5(81)
480(18.9) 840(33) 910(35.8) 930(36.6) 1011(39.8)
790(31.1)(DOOR OPEN)
560(22)(DOOR OPEN)
L300LA/LMA/LMSA L300LC/LMC/LMSC
unit : mm(in)Tooling System
U-Drill U-Drill Sleeve
U-Drill Holder Facing Holder
Outside
Grooving
ThreadingO.D HolderBoring Holder
Boring BarSocket
Drill
Boring Bar
12 Stations
Single
Tool Holder
Cap
Ø20 (3/4″)
Ø32 (1 1/4″)
MT 2
MT 3
MT 4MT 3
Facing Holder
I.D. Tool Holder
U-Drill Tool Holder
Boringbar Socket
Drill
Turning Holder
Boring Holder
Socket
ITEM L300A/LA L300C/LC
1 1
5 5
Opt -
- Opt
1 1
1 1
1 1
1 1
1 1
Tooling Parts Detail
Specifications are subject to change for improvement without notice.
L300A/LA L300C/LC
SPECIFICATIONS
unit : mm(in)Tooling System
BMT65P12 Stations
BMT65P12 Stations
TapTapping Collet
ET32
Milling ColletET32
Angular MillHolder
Long Angular Mill Holder
Boring HolderBoring Bar
Socket Boring Bar
Face Tool
O.D Tool
Facing Holder
O.D Holder
DoubleO.D Holder
Straight MillHolder
Cutting Holder
U-Drill HolderU-Drill Socket
Cutting Tool
End Mill
Center Drill
Drill
U-Drill
Reamer
TapTapping Collet
ET32
Milling ColletET32
Angular MillHolder
Boring HolderBoring Bar
Socket
Boring BarSocket
Boring Bar
Face Tool
O.D Tool
Facing Holder
O.D Holder
Straight MillHolder
Cutting Holder
U-Drill HolderU-Drill Socket
Cutting Tool
End Mill
Center Drill
Drill
U-Drill
Reamer
DoubleI.D Holder Drill
Right/Left
Double
Single
Double
Tool Holder Cap
Standard
Standard
Long
Ø16 (5/8″)
Ø20 (3/4″)
Ø25 (1″)
Ø32 (1 1/4″)
Ø40 (1 1/2″)
Ø6 (1/4″)
Ø12 (1/2″)
Ø20 (3/4″)
MT 1 × MT 2
MT 2
MT 3
MT 4MT 3
O.D Holder
Facing Holder
Cutting Holder
I.D Holder
U-Drill Holder
Straight Mill Holder
Angular Mill Holder
Boring Main
Boring Sub
Drill
ER Collet
Turning Holder
Driven Holder
Boring Holder
Socket
ITEM L300MA/MC/LMA/LMC L300MSA/LMSA/MSC
4 1
- 1
1 1
- 1
3 2
- 1
opt. opt.
2 2
2 2
- 1
1 -
1 1
1 1
1 1
1 1
- 1
- 1
- 1
1 1
1 1
1 1
1 1
1 Set 1 Set
Tooling Parts Detail
L300MA/LMA/MSA L300MC/LMC
Specifications are subject to change for improvement without notice.
22+
23
L3
00 S
ERIE
SC
nC
Tu
rn
ing
Cen
Ter
HYu
nD
Ai W
iAM
ACH
ine
TOO
L
SPECIFICATIONS
unit : mm(in)Interference
352(13.8)67
(2.6)42
(1.6)245(9.6)287(11.3)
288(11.3)355(13.9)
Ø304(
11.9)
6
Ø710(
27.9)
Ø271(10.6)
Ø595(23.4)
Ø576
(22.6)
100
(3.9
)
L300A/LA
L300C/LC
SPECIFICATIONS
unit : mm(in)Interference
352(13.8)67
(2.6)42
(1.6)245(9.6)287(11.3)
288(11.3)355(13.9)
Ø304(
11.9)
6
Ø710(
27.9)
Ø271(10.6)
Ø595(23.4)
Ø576
(22.6)
100
(3.9
)
L300MA/LMA
L300MC/LMC
24+
25
L3
00 S
ERIE
SC
nC
Tu
rn
ing
Cen
Ter
HYu
nD
Ai W
iAM
ACH
ine
TOO
L
SPECIFICATIONS
unit : mm(in)Interference
352(13.8)67
(2.6)42
(1.6)245(9.6)287(11.3)
288(11.3)355(13.9)
Ø304(
11.9)
6
Ø710(
27.9)
Ø271(10.6)
Ø595(23.4)
Ø576
(22.6)
100
(3.9
)
L300MSA/LMSA
L300MSC
SPECIFICATIONS
unit : mm(in)Tooling Travel Range
L300AL300LA
L300CL300LC
26+
27
L3
00 S
ERIE
SC
nC
Tu
rn
ing
Cen
Ter
HYu
nD
Ai W
iAM
ACH
ine
TOO
L
SPECIFICATIONS
unit : mm(in)Tooling Travel Range
L300MAL300LMA
L300MSAL300LMSA
SPECIFICATIONS
unit : mm(in)Tooling Travel Range
L300MCL300LMC
L300MSC
28+
29
L3
00 S
ERIE
SC
nC
Tu
rn
ing
Cen
Ter
HYu
nD
Ai W
iAM
ACH
ine
TOO
L
SPECIFICATIONS
Swing Over the Bed
Swing Over the Carriage
Max. Turning Dia.
Max. Turning Length
Bar Capacity Main
Sub
Chuck Size Main
Sub
Spindle Bore Main
Sub
Spindle Speed (rpm) Main
Sub
Motor (Max/Cont.) Main
Sub
Torque (Max/Con.) Main
Sub
Spindle Type Main
Sub
Spindle nose Main
Sub
C-axis Indexing
Travel (X/Z/ZB)
Rapid Travel (X/Z/ZB)
Slide Type
no. of Tool
Tool Size OD
ID
Indexing Time
Motor (Max/Cont.)
Milling Tool Speed (rpm)
Torque (Max/Cont.)
Collet Size
Type
Taper
Quill Dia.
Quill Travel
Travel
Coolant Tank
Lubricating Tank
Electric Power Supply
Thickness of Power Cable
Voltage
Floor Space (L×W)
Height
Weight
Controller
CAPACITY
FEED
TANkCAPACITY
SPINDlE
TURRET
lIvE TOOl
TAIlSTOCk
MACHINE
NC
POWERSUPPlY
mm(in)
mm(in)
mm(in)
mm(in)
mm(in)
mm(in)
mm(in)
mm(in)
mm(in)
mm(in)
r/min
r/min
kW(HP)
kW(HP)
N.m
N.m
-
-
-
-
deg
mm(in)
m/min
-
EA
mm(in)
mm(in)
sec/step
kW(HP)
r/min
N.m
mm(in)
-
-
mm(in)
mm(in)
mm(in)
ℓ(gal)
ℓ(gal)
kVA
Sq
V/Hz
mm(in)
mm(in)
kg(lb)
-
Ø750 (29.5″)
Ø480 (18.9″)
Ø500 (19.7″) Ø410 (16.1″)
720 (28.3″) 680 (26.8″)
Ø76 (3″)
- Ø65 (2.6″)
Ø254 (10″)
- Ø210 (8″)
Ø90 (3.5″) Ø95(3.7″)
- Ø78 (3.1″)
3,600 [3,500] 3,500
- 4,000
22/18.5 (30/25) [22/18.5 (30/25)] 22/18.5 (30/25)
- 11/7.5
755.8/635.5 [783.2/652.7] 493.2/414.7
- 140/95.5
Belt+2Step Gear Belt
- Belt
A2-8
- A2-6
- 0.001˚
290/750 (11.4″/29.5″) 290/750/700
(11.4″/29.5″/27.6″)
20/24 20/24/20
BOX GUIDE
12
□25 (1″)
Ø50 (2″)
0.3
- 5.5/3.7 (7/5)
- 4,000
- 35/23.5
- Ø20 (0.8″) -ER32
- BMT65P
MT5 -
Ø100 (3.94″) -
120 (4.72″) -
750 (29.5) -
220 (58.1)
1.8 (0.5)
25 27 35
Over 25 Over 35
220/60 (200/50)
3,200×2,002(126″×78.8″) 3,360×2,002(132.3″×78.8″) 3,470×2,002(136.6″×78.8″)
1,997 (78.6″)
6,300 (13,889) 6,500 (14,330) 7,000 (15,432)
HW FANUC i Series [FANUC 32i-A] [SIEMENS 828D]
Specifications are subject to change for improvement without notice.
ITEM L300A L300MA L300MSA
Specifications [ ] : Option
SPECIFICATIONS
Swing Over the Bed
Swing Over the Carriage
Max. Turning Dia.
Max. Turning Length
Bar Capacity Main
Sub
Chuck Size Main
Sub
Spindle Bore Main
Sub
Spindle Speed (rpm) Main
Sub
Motor (Max/Cont.) Main
Sub
Torque (Max/Con.) Main
Sub
Spindle Type Main
Sub
Spindle nose Main
Sub
C-axis Indexing
Travel (X/Z/ZB)
Rapid Travel (X/Z/ZB)
Slide Type
no. of Tool
Tool Size OD
ID
Indexing Time
Motor (Max/Cont.)
Milling Tool Speed (rpm)
Torque (Max/Cont.)
Collet Size
Type
Taper
Quill Dia.
Quill Travel
Travel
Coolant Tank
Lubricating Tank
Electric Power Supply
Thickness of Power Cable
Voltage
Floor Space (L×W)
Height
Weight
Controller
CAPACITY
FEED
TANkCAPACITY
SPINDlE
TURRET
lIvE TOOl
TAIlSTOCk
MACHINE
NC
POWERSUPPlY
mm(in)
mm(in)
mm(in)
mm(in)
mm(in)
mm(in)
mm(in)
mm(in)
mm(in)
mm(in)
r/min
r/min
kW(HP)
kW(HP)
N.m
N.m
-
-
-
-
deg
mm(in)
m/min
-
EA
mm(in)
mm(in)
sec/step
kW(HP)
r/min
N.m
mm(in)
-
-
mm(in)
mm(in)
mm(in)
ℓ(gal)
ℓ(gal)
kVA
Sq
V/Hz
mm(in)
mm(in)
kg(lb)
-
Ø750 (29.5″)
Ø480 (18.9″)
Ø500 (19.7″) Ø410(16.1″)
1,320 (52″) 1,280 (50.4″) 1,250 (49.2″)
Ø76 (3″)
- Ø65 (2.6″)
Ø254 (10″)
- Ø210 (8″)
Ø90 (3.5″) Ø95 (3.7″)
- Ø78 (3.1″)
3,600 3,500
- 4,000
22/18.5 (30/25)
- 11/7.5 (15/10)
755.8/635.5 493.2/414.7
- 140/95.5
Belt+2Step Gear Belt
- Belt
A2-8
- A2-6
- 0.001˚
290/1,350(11.4″/53.1″)
290/1,350/1,200
(11.4″/53.1″/47.2″)
20/24 20/24/20
BOX GUIDE
12
□25 (1″)
Ø50 (2″)
0.3
- 5.5/3.7 (7/5)
- 4,000
- 35/23.5
- Ø20 (0.8″) -ER32
- BMT65P
MT5 -
Ø100 (3.94″) -
120 (4.72″) -
1,350 (53.1) -
270 (71.3)
1.8 (0.5)
25 27 35
Over 25 Over 35
220/60 (200/50)
4,171×2,002(164.2″×78.8″)
1,997 (78.6″)
7,500 (16,535) 7,700 (16,976) 8,200 (18,078)
HW FANUC i Series [FANUC 32i-A]
L300LMSA : FANUC 31i-A [FANUC 32i-A] [HW FANUC i Series]
Specifications are subject to change for improvement without notice.
ITEM L300LA L300LMA L300LMSA
Specifications [ ] : Option
30+
31
L3
00 S
ERIE
SC
nC
Tu
rn
ing
Cen
Ter
HYu
nD
Ai W
iAM
ACH
ine
TOO
L
SPECIFICATIONS
Ø750 (29.5″)
Ø480 (18.9″)
Ø560 (22″) Ø500 (19.7″) Ø560 (22″) Ø500 (19.7″)
720 (28.3″) 660 (26″) 1,320 (52″) 1,260 (49.6″)
Ø90 (3.5″)
- Ø65 (2.6″) -
Ø305 (12″)
- Ø210 (8″) -
Ø102 (4″)
- Ø78 (3.1″) -
3,000
- 4,000 -
26/22 (35/30) 22/18.5 (30/25) 26/22 (35/30) 22/18.5 (30/25)
- 11/7.5 (15/10 -
1,098.7/929.7 786.9/661.7 1,098.7/929.7 786.9/661.7
- 140.0 -
BELT+2STEP GEAR BELT BELT+2STEP GEAR BELT
- BELT -
A2-8
- A2-6 -
- 0.001˚ - 0.001˚
335/750 335/750/700 355/1,350 335/1,350
(13.2″/29.5″) (13.2″/29.5″/27.6″) (14″/53.1) (13.2″/53.1)
20/24 20/24/20 20/24
BOX GUIDE
12
□25 (1″)
Ø50 (2″)
0.3
- 5.5/3.7 (7/5) - 5.5/3.7 (7/5)
- 4,000 - 4,000
- 35/23.5 - 35/23.5
- Ø20 (0.8″)-ER32 - Ø20 (0.8″)-ER32
- BMT65P - BMT65P
MT5 - MT5
Ø100 (3.9″) - Ø100 (3.9″)
120 (4.7″) - 120 (4.7″)
750 (29.5″) - 1,350 (53.1″)
220 (58.1) 270 (71.3)
1.8 (0.5)
30 38 30
Over 35
220/60 (200/50)
3,506 x 2,002 3,480 x 2,002 3,586 x 2,002 4,170 x 2,002
(138″ x 78.8″) (137″ x 78.8″) (141.2″ x 78.8″) (164.2″ x 78.8″)
1,997 (78.6″)
6,400 6,600 7,100 7,600 7,800
HW FANUC i Series [FANUC 32i-A]L300MSC : FANUC 31i-A [FANUC 32i-A] [HW FANUC i Series]
Specifications are subject to change for improvement without notice.
Swing Over the Bed
Swing Over the Carriage
Max. Turning Dia.
Max. Turning Length
Bar Capacity Main
Sub
Chuck Size Main
Sub
Spindle Bore Main
Sub
Spindle Speed (rpm) Main
Sub
Motor (Max/Cont.) Main
Sub
Torque (Max/Con.) Main
Sub
Spindle Type Main
Sub
Spindle nose Main
Sub
C-axis Indexing
Travel (X/Z/ZB)
Rapid Travel (X/Z/ZB)
Slide Type
no. of Tool
Tool Size OD
ID
Indexing Time
Motor (Max/Cont.)
Milling Tool Speed (rpm)
Torque (Max/Cont.)
Collet Size
Type
Taper
Quill Dia.
Quill Travel
Travel
Coolant Tank
Lubricating Tank
Electric Power Supply
Thickness of Power Cable
Voltage
Floor Space (L×W)
Height
Weight
Controller
CAPACITY
FEED
TANkCAPACITY
SPINDlE
TURRET
lIvE TOOl
TAIlSTOCk
MACHINE
NC
POWERSUPP lY
mm(in)
mm(in)
mm(in)
mm(in)
mm(in)
mm(in)
mm(in)
mm(in)
mm(in)
mm(in)
r/min
r/min
kW(HP)
kW(HP)
N.m
N.m
-
-
-
-
deg
mm(in)
m/min
-
EA
mm(in)
mm(in)
sec/step
kW(HP)
r/min
N.m
mm(in)
-
-
mm(in)
mm(in)
mm(in)
ℓ(gal)
ℓ(gal)
kVA
Sq
V/Hz
mm(in)
mm(in)
kg(lb)
-
ITEM L300C L300MC L300MSC L300LC L300LMC
Specifications [ ] : Option
SPECIFICATIONS
SIEMENS 828D (L300A)Control function
Max. configuration of Axis
Max. configuration of Axis and sp.
Least Command/inputFeed functionFeedrate OverrideRapid Traverse OverrideAcceleration with jerk limitationProgrammable accelerationFollow-up modeMeasuring system 1 and 2, selectableSeparate path feed for corners and chamfersTravel to fixed stopSpindle functionSpindle OverrideSpindle OrientationSpindle Speed LimitationRigid TappingInterpolation functionLinear interpolation AxisCircle via center point and end pointCircle via interpolation pointHelical interpolationUniversal interpolator nURBS(non-uniform rational B splines)Continuous-path mode with programmablerounding clearanceTool functionTool Radius Comp.Zero Offset (G54, G55, G56, G57 ,G58, G59)Programmable Zero OffsetTool managementDisplayCRT / MDISCREEn SAVERManual OperationManual Handle/Jog FeedRepositionReference ApproachSpindle ControlAuto OperationSingle BlockFeed HoldOptional Block SkipMachine LockDry RunSimulationDiagnosis functionAlarm DisplaySpindle Load/rpm MeterPLC status/LAD displayProgram function
Part Program Storage Length
Program NameSubroutine CallAbsolute/incremental CommandScaling, ROTInch / Metric ConversionConversational Cycle ProgramBlock SearchVariable Program (Macro)Read / Write System VariableBackGround EditingMiscellaneous FunctionsLable SkipProgram Stop/EndLookahead , Jerk LimitationFeed &forward control
3 Axis(MS / SY exception)4 Axis(MS / SY machine only)6 Axis(MS / SY exception)8 Axis(MS / SY machine only)0.0001mm / 0.00001inch
0 - 120%F1, 5, 25/50, 100%
50% - 120%
Max. 4 axis
100 EA
10.4˝ Color LCDNone
Ref 1, 2 ApproachStart, Stop, Rev, Jog, Ort.
(2 dimensional)
3MB (MS / SY exception) PPU26x.x5MB (MS / SY machine only) PPU28x.x23 digit(7 level) G90 - G91
(22 Machine)
M - Code
M00, M01, M02, M30
Program functionISO Dialect Interpreter(G291) (Fanuc Program exe)
Maximum number of tools/cuttings
number of levels for skip blocks 1Protection FunctionEmergency StopOver TravelContour MonitoringProgram ProtectionAutomation Support Fun.Actual Speed Display(Monitor)Tool Life ManagementWork Count Functionlanguage Function
Two Language switchable
Data TransferRS 232C I/F / EthernetUSB Memory Stick & CF Card
OptionShop Turn3D SimulationDRF offsetTeach -innumber of levels for skip blocks 8TRACYL (Cylinder interpolation)TRAnSMIT (Pole coordinate command)Sister ToolA,B,C SPLInE InTERPOLATIOnRCS HOST (Remote Control)Simultaneous Recording (real time monitoring)Analysis of Internal Drive Valuesnetwork Drive Management
Figures in inch are converted from metric values.Design and specifications subject to change without notice.
128/256 (MS / SY exception) PPU26x.x256/512 (MS / SY machine only) PPU28x.x
Soft Limit & Hard O.T
(Time, Parts)(Internal)
(6EA)Chinese Traditional, Czech, Danish, Dutch, Finnish, Hungarian, Japanese, Korean, Polish, Russian, Swedish, Portuguese, Turkish
32+
33
L3
00 S
ERIE
SC
nC
Tu
rn
ing
Cen
Ter
HYu
nD
Ai W
iAM
ACH
ine
TOO
L
CONTROLLER
HYUNDAI WIA FANUC i SeriesAxis control / Display unit
Controlled Axis
Simultaneous controllable Axis
Least input increment
Least command increment
High speed HRV controlInch / Metric conversionInterlockMachine lockEmergency stopStored stroke check 1Stored stroke check 2Stored stroke check 3Follow-upServo-offBacklash compensationPosition switchUnexpected disturbance torque detectionHigh resolution transfer control (HRM)LCD / MDIOperation Automatic operation (memory)MDI operationSearch functionProgram restartWrong operation preventionBuffer registerProgram check functionSingle blockFeed functionsManual jog feedManual handle feedrateFeed commandFeedrate overrideJog overrideRapid traverse overrideOverride cancelFeed per minute / rotationProgram input & interpolation functionsnano interpolationDwellThread retractVariable lead threading1st reference point returnReference point return check2nd reference point returnProgram stop / EndTape codeOptional block skipMaximum programmable dimensionsProgram numberAbsolute and incremental programmingDecimal point inputPlane selectionWork coordinate system selectionManual absoluteDirect drawing dimension programmingG code systemProgrammable data inputSub program callCustom macro BAddition of custom macro common variableMultiple repetitive cyclesMultiple repetitive cycles ⅡCanned cycles for turningManual guide i
Max. 4 Axis are availableX, Z axisX, Z, C axis (M type machine)X, Z, Y, C axis (Y type machine)X, Z, B, C axis (MS type machine)2axis / Linear and circular (Max. 4axis)X, Z, Y, B axis : 0.001 mm (0.0001”)C axis : 0.001 degX, Z, Y, B axis : 0.001 mm (0.0001”)C axis : 0.001 deg
G20 / G21Each axis / All axisAll axis
Over-travel
+/- 0~9999 pulses(Rapid traverse & cutting feed)
Back-spin torque limiter (BST)
8.4″ Color LCD
Sequence, program
Dry run., program check
Rapid, jog, handlex1, x10, x100F code feedrate direct command0~200 % (10% units)0~2,000 mm/min[79 ipm]F1, F5, F25/F50, F100%
Positioning/Linear/Circular (G00/G01/G02, G03)G04, 0~9999.9999 sec
G28, manualG27G30M00, M01 / M02, M30EIA / ISO 1 ea+/- 9999.9999″O+4 digits
G17, G18, G19G52 to G59“On” fixedIncluded chamfering / Corner R`AG1010 Step
#100 to #199, #500 to #999
Interactive program
Sub / Main spindle functionM-Code functionM-Code function lockLock sp. speed commandMain sp. constant controlSpindle speed overrideSpindle position decisionRigid tappingTool function / Tool compensationTool functionTool offset pairsTool offsetTool nose radius compensationDirect input of measured toolcompensation value BTool life managementData in/output & editing functionsReader / Puncher interfaceMemory card input/outputPart program storage lengthnumber of registrable programs expansionMemory lockBackground editingExtended part program editionDisplay, diagnosis & setting functionsSelf-diagnosis functionHistory displayHelp functionExternal messageRun hour / Parts count displayDisplay of actual spindle speed and T codeActual cutting feedrate displayOperating monitor screenGraphic displaySpindle / Servo setting screenSelection of 5 optional languageLCD screen saveAutomatic data backupFunctions according to machine specificationCs contouring controlStored pitch error compensationPolar coordinate interpolationCylindrical interpolationCanned cycles for drillingspindle orientation expansionSpindle synchronous controlTorque controlY axis offsetAngular axis control
OptionHigh speed ethernetOptional block skip3rd & 4th reference point returnG code systemPart program storage lengthPolygon turningHelical interpolationDynamic graphic displayProtection of data at 8 levelsTool Monitoring functionManual guide i
Figures in inch are converted from metric values.Design and specifications subject to change without notice.
M4 digits
S4 digits, binary outputG96, G9750% to 150% (10% units)
T2 + 264 pairs
G40, G41, G42
RS232C
320 KbyteMax. 500 programs
Copy, move, change of nC program
Alarm & operation display
Rod meter light
Screen saver
Turn millTurn millTurn millTurn millTurn millTurn mill, Sub spindleSub spindleSub spindleY type machineY type machine
100 Mbps (Option board is required)9 ea
B / C512 Kbyte
HWTM (Built-in Fanuc type)Interactive program (10.4″ Color LCD)
CONTROLLER
FANUC 31i-AAxis control / Display unit
Controlled Axis
Simultaneous controllable Axis
Least input increment
Least command increment
High speed HRV controlInch / Metric conversionInterlockMachine lockEmergency stopStored stroke check 1Stored stroke check 2Stored stroke check 3Follow-upServo-offBacklash compensationPosition switchUnexpected disturbance torque detectionHigh resolution transfer control (HRM)LCD / MDIOperation Automatic operation (memory)MDI operationSearch functionProgram restartWrong operation preventionBuffer registerProgram check functionSingle blockFeed functionsManual jog feedManual handle feedrateFeed commandFeedrate overrideJog overrideRapid traverse overrideOverride cancelFeed per minute / rotationProgram input & interpolation functionsnano interpolationDwellThread retractVariable lead threading1st reference point returnReference point return check2nd reference point returnProgram stop / EndTape codeOptional block skipMaximum programmable dimensionsProgram numberAbsolute and incremental programmingDecimal point inputPlane selectionWork coordinate system selectionManual absoluteDirect drawing dimension programmingG code systemProgrammable data inputSub program callCustom macro BAddition of custom macro common variableMultiple repetitive cyclesMultiple repetitive cycles ⅡCanned cycles for turning
Max. 6 Axis are availableX, Z axisX, Z, C axis (M type machine)X, Z, B, C, A axis (MS type machine)X, Z, Y, B, C, A axis (SY type machine)2axeis / Linear and circular (Max. 4Axis)X, Z, Y, B axis : 0.001 mm (0.0001”)C axis : 0.001 degX, Z, Y, B axis : 0.001 mm (0.0001”)C axis : 0.001 deg
G20 / G21Each axis / All axisAll axis
Over-travel
+/- 0~9999 pulses(Rapid traverse & cutting feed)
Back-spin torque limiter (BST)
10.4″ Color LCD
Sequence, program
Dry run., program check
Rapid, jog, handlex1, x10, x100F code feedrate direct command0~200 % (10% units)0~2,000 mm/min[79 ipm]F1, F5, F25/F50, F100%
Positioning/Linear/Circular (G00/G01/G02, G03)G04, 0~9999.9999 sec
G28, manualG27G30M00, M01 / M02, M30EIA / ISO 1 ea+/- 9999.9999″O+4 digits
G17, G18, G19G52 to G59“On” fixed
Included chamfering / Corner R`AG1010 Step
#100 to #199, #500 to #999
Sub / Main spindle functionM-Code functionM-Code function lockLock sp. speed commandMain sp. constant controlSpindle speed overrideSpindle position decisionRigid tappingTool function / Tool compensationTool functionTool offset pairsTool offsetTool nose radius compensationDirect input of measured toolcompensation value BTool life managementData in/output & editing functionsInput/Output interfaceMemory card input/outputEmbeded ethernetPart program storage lengthnumber of registrable programs expansionMemory lockBackground editingExtended part program editionDisplay, diagnosis & setting functionsSelf-diagnosis functionHistory displayHelp functionExternal messageRun hour / Parts count displayDisplay of actual spindle speed and T codeActual cutting feedrate displayOperating monitor screenGraphic displaySpindle / Servo setting screenSelection of 5 optional languageLCD screen saveAutomatic data backupFunctions according to machine specificationCs contouring controlStored pitch error compensationPolar coordinate interpolationCylindrical interpolationCanned cycles for drillingspindle orientation expansionSpindle synchronous controlTorque control
OptionHigh speed ethernetOptional block skip3rd & 4th reference point returnG code systemPart program storage lengthTool OffestPoligon TurningHelical interpolationDynamic graphic displayProtection of data at 8 levelsManual guide iTool Monitoring function
Figures in inch are converted from metric values.Design and specifications subject to change without notice.
M4 digits
S4 digits, binary outputG96, G9750% to 150% (10% units)
T2 + 264 pairs
G40, G41, G42
RS232C
100Mbps256 KbyteMax. 500 programs
Copy, move, change of nC program
Alarm & operation display
Rod meter light
Screen saver
Turn millTurn millTurn millTurn millTurn millTurn mill, Sub spindleSub spindleSub spindle
100 Mbps (Option board is required)9 ea
B / C512 Kbyte / 1024 Kbyte99 / 200 / 400 EA
Interactive programHWTM (Built-in Fanuc type)
34+
35
L3
00 S
ERIE
SC
nC
Tu
rn
ing
Cen
Ter
HYu
nD
Ai W
iAM
ACH
ine
TOO
L
CONTROLLER
FANUC 32i-AAxis control / Display unit
Controlled Axis
Simultaneous controllable Axis
Least input increment
Least command increment
High speed HRV controlInch / Metric conversionInterlockMachine lockEmergency stopStored stroke check 1Stored stroke check 2Stored stroke check 3Follow-upServo-offBacklash compensationPosition switchUnexpected disturbance torque detectionHigh resolution transfer control (HRM)LCD / MDIOperation Automatic operation (memory)MDI operationSearch functionProgram restartWrong operation preventionBuffer registerProgram check functionSingle blockFeed functionsManual jog feedManual handle feedrateFeed commandFeedrate overrideJog overrideRapid traverse overrideOverride cancelFeed per minute / rotationProgram input & interpolation functionsnano interpolationDwellThread retractVariable lead threading1st reference point returnReference point return check2nd reference point returnProgram stop / EndTape codeOptional block skipMaximum programmable dimensionsProgram numberAbsolute and incremental programmingDecimal point inputPlane selectionWork coordinate system selectionManual absoluteDirect drawing dimension programmingG code systemProgrammable data inputSub program callCustom macro BAddition of custom macro common variableMultiple repetitive cyclesMultiple repetitive cycles ⅡCanned cycles for turningManual guide i
Max. 4 Axis are availableX, Z axisX, Z, C axis (M type machine)X, Z, Y, C axis (Y type machine)X, Z, B, C axis (MS type machine)2axis / Linear and circular (Max. 4axis)X, Z, Y, B axis : 0.001 mm (0.0001”)C axis : 0.001 degX, Z, Y, B axis : 0.001 mm (0.0001”)C axis : 0.001 deg
G20 / G21Each axis / All axisAll axis
Over-travel
+/- 0~9999 pulses(Rapid traverse & cutting feed)
Back-spin torque limiter (BST)
10.4″ Color LCD
Sequence, program
Dry run., program check
Rapid, jog, handlex1, x10, x100F code feedrate direct command0~200 % (10% units)0~2,000 mm/min[79 ipm]F1, F5, F25/F50, F100%
Positioning/Linear/Circular (G00/G01/G02, G03)G04, 0~9999.9999 sec
G28, manualG27G30M00, M01 / M02, M30EIA / ISO 1 ea+/- 9999.9999″O+4 digits
G17, G18, G19G52 to G59“On” fixedIncluded chamfering / Corner R`AG1010 Step
#100 to #199, #500 to #999
Interactive program
Sub / Main spindle functionM-Code functionM-Code function lockLock sp. speed commandMain sp. constant controlSpindle speed overrideSpindle position decisionRigid tappingTool function / Tool compensationTool functionTool offset pairsTool offsetTool nose radius compensationDirect input of measured toolcompensation value BTool life managementData in/output & editing functionsReader / Puncher interfaceMemory card input/outputPart program storage lengthnumber of registrable programs expansionMemory lockBackground editingExtended part program editionDisplay, diagnosis & setting functionsSelf-diagnosis functionHistory displayHelp functionExternal messageRun hour / Parts count displayDisplay of actual spindle speed and T codeActual cutting feedrate displayOperating monitor screenGraphic displaySpindle / Servo setting screenSelection of 5 optional languageLCD screen saveAutomatic data backupFunctions according to machine specificationCs contouring controlStored pitch error compensationPolar coordinate interpolationCylindrical interpolationCanned cycles for drillingspindle orientation expansionSpindle synchronous controlTorque controlY axis offsetAngular axis control
OptionHigh speed ethernetOptional block skip3rd & 4th reference point returnG code systemPart program storage lengthPolygon turningHelical interpolationDynamic graphic displayProtection of data at 8 levelsTool Monitoring function
Figures in inch are converted from metric values.Design and specifications subject to change without notice.
M4 digits
S4 digits, binary outputG96, G9750% to 150% (10% units)
T2 + 264 pairs
G40, G41, G42
RS232C
256 KbyteMax. 500 programs
Copy, move, change of nC program
Alarm & operation display
Rod meter light
Screen saver
Turn millTurn millTurn millTurn millTurn millTurn mill, Sub spindleSub spindleSub spindleY type machineY type machine
100 Mbps (Option board is required)9 ea
B / C512 Kbyte
HWTM (Built-in Fanuc type)
CONTROLLER
AMERICA CORP. (Chicago Office)HYUNDAI WIA America Technical Center
AMERICA CORP. (L.A Office)
BEIJING OFFICESHENYANG OFFICE
Qingdao OFFICEShandong hyundai wia
Jiangsu HYUNDAI WIAHYUNDAI WIAMachine Tools Co. LTD
HEADOFFICE
GUANGZHOU OFFICE
WUHAN OFFICECHENGDU OFFICE
HYUNDAI WIA India
HYUNDAI WIA EuropeRaunheim Service Center
GLOBAL NETWORk
OverseasofficeHYUNDAIWIAEuropeKaiserleipromenade 5, 63067 Offenbach, Germany
RaunheimServiceCenterFrankfurter Strasse 51, 65479 Raunheim, Germany
HYUNDAIWIAIndia48, Sur.No78-80. Kandamangalam Village, Sengadu Post, Sriperumbudur Taluk, Kancheepuram, Tamil Nadu - 602 105
ChinaBeijingOfficeRoom 908, Hyundai Motor Building, No.38 Xiaoyun Road, Chaoyang District, Beijing, China 100027
ChinaGuangzhouOfficeRoom 609, No.1 Yingbin Building (Dashi Section) Panyu District, Guangzhou Ctiy, Guangdong, China 511431ChinaChengduOfficeRoom 2103, Block A, Times Plaza, No.2 Zongfu Road, Jinjiang District, Chengdu, China 610016
ChinaWuhanOffice Room 302, B Tower, Donghe Center, Dongfeng Three Toad, Zhuankou, Wuhan, Hubei, ChinaChinaQingdaoOfficeRoom 1207, Caifu Building, 182-6 Haier Middle Road, Qingdao 266061, China
ChinaShenyangOfficeRoom 1304, No.53 Beizhan Road, Shenhe District,Shenyang China 110013
AmericaofficeHYUNDAIWIAAmerica265, Spring Lake Drive, Itasca, IL, 60143
L.A.office11125 Knott Ave. STE B/C Cypress, CA 90630
HYUNDAIWIAAmericaTechnicalcenter39205 Country Club Drive Suite C-9, Farmington Hills, MI, 48310
Headquarters153, Jeongdong-ro, Seongsan-gu, Changwon-si, Gyeongnam, Korea (Zip Code : 642-110)
ChinaHYUNDAIWIACorporationShandongHYUNDAIWIACompany No.188 Shanghai Road, Rizhao City, Shandong Province, China
JiangsuHYUNDAIWIACompany No.6, Fenghuang Road, Fenghuang Town,Zhangjiagang City, Jiangsu Province, China
HYUNDAIWIAMachineToolsCo.LTD1-3F, Bldg6, No.1535 Hongmei Road, Xuhui District,Shanghai, China, 200233
36+
37
L3
00 S
ERIE
SC
nC
Tu
rn
ing
Cen
Ter
HYu
nD
Ai W
iAM
ACH
ine
TOO
L