Post on 23-Aug-2020
IMPACT CARCASE SYSTEMFOR THE CABINET MAKING INDUSTRY Brought to you by Häfele
ww
w.h
afel
e.co
m.a
u
IMPACT CARCASE SYSTEM / FOR THE CABINET MAKING INDUSTRY - 07.14
2
2350 MM KITCHEN
OVERVIEW.
Material: 16mm moisture resistant particle board 1mm IMPACT ABS edgeband (0.4mm edgeband to top and bottom edge of the cabinet ends and back - overhead cabinets only)
Finish: White satin melamine, white satin edgeband
All cabinet heights exclude the height of the adjustable feet. Dimensions: W x D x H
FLEXIBILITYIMPACT carcases can be used in more than one design, allowing for greater design flexibility. Also, a comprehensive range of quality accessories are available to complete your carcase system and complement your kitchen, bathroom, laundry, study or commercial space.
EFFICIENCYIMPACT carcases are ready to assemble and will save you time with cutting, edging and drilling. This allows for minimal preparation time, less wasted materials and a quicker installation process. The carcase units are also packed in cartons for ease of handling.
CONVENIENCEAll IMPACT carcase kits are pre-drilled and supplied with locating dowels for ease of assembly. All carcase kits are supplied with a hardware pack, including not only locating dowels, but also connecting screws, shelf supports, cabinet legs, Salice hinges and Alto soft close drawer hardware where applicable.
DURABILITYIMPACT carcases are made from Australian produced 16 mm moisture resistant whiteboard and are manufactured using a 1 mm ABS edgeband. This eliminates dark edges and improves the impact resistance.
SERVICEIn line with Häfele’s service-oriented standards, all IMPACT carcase units and drawer systems are available from stock with same day despatch.
3
LAUNDRY BASE CABINETS
BASE CABINETS
A range of standard base, corner and blind corner cabinets.
Choose from 450 mm (4 drawer), 600 mm (3 drawer) or 900 mm (2 or 3 drawer) wide cabinets. Pre-drilled for Häfele Alto drawers.
From standard 720 mm high overhead cabinets to corner, rangehood and fridge cabinets. There is an overhead solution for all kitchen designs.
Caters for single oven tower, double oven tower, under bench mounted ovens or microwave cabinets.
DRAWER CABINETS
OVERHEAD CABINETS
OVENCABINETS
PAGE PAGE PAGE
PAGE
Simplifying laundry solutions. Ready to go laundry hamper, ironing board and broom cabinets.
For tall pantry solutions, choose between standard pantry, pull-out pantry or corner pantry cabinets.
10
0704 05 06
08-09PAGE
PAGE
TALL PANTRY CABINETS
IMPACT CARCASE SYSTEM / FOR THE CABINET MAKING INDUSTRY - 07.14
4
Base corner cabinet
Base blind corner cabinet
Supplied with:> 2 Ends> 2 Top rails> 1 Base> 1 Fixed shelf> 2 Back> Fixing and mounting hardware> Salice hinges and mount plates> Adjustable feet
Supplied with:> 2 Ends> 2 Top rails> 1 Base> 1 Adjustable shelf> 1 Back> 1 Vertical rail> Fixing and mounting hardware> Salice hinges and mount plates> Adjustable feet> Shelf supports
Base corner cabinet Cat. No.
900 x 900 mm (900 x 900 x 560 x 720) 561.00.050
Base blind corner cabinet Cat. No.
1100 mm (1100 x 560 x 720) 561.00.051
Base cabinets
Supplied with:> 2 Ends> 2 Top rails> 1 Base> 1 Adjustable shelf> 1 Back> Fixing and mounting hardware> Salice hinges and mount plates> Adjustable feet> Shelf supports
Base cabinets Cat. No.
150 mm (150 x 560 x 720) 561.00.000
300 mm (300 x 560 x 720) 561.00.001
400 mm (400 x 560 x 720) 561.00.002
450 mm (450 x 560 x 720) 561.00.003
500 mm (500 x 560 x 720) 561.00.004
600 mm (600 x 560 x 720) 561.00.005
700 mm (700 x 560 x 720) 561.00.006
800 mm (800 x 560 x 720) 561.00.007
900 mm (900 x 560 x 720) 561.00.008
1000 mm (1000 x 560 x 720) 561.00.009
BASE CABINETS.
5
DRAWER CABINETS.
Drawer cabinet 450 mm
Drawer cabinets 600 mm
Drawer cabinets 900 mm
Alto drawer cabinet Cat. No.
4 Drawer 450 mm (450 x 560 x 720) 561.00.028
Alto drawer cabinet Cat. No.
3 Drawer 600 mm (600 x 560 x 720) 561.00.029
Alto drawer cabinet Cat. No.
2 Drawer 900 mm (900 x 560 x 720) 561.00.030
3 Drawer 900 mm (900 x 560 x 720) 561.00.031
Supplied with:> 2 Ends> 2 Top rails> 1 Base> 1 Back> Fixing and mounting hardware> Alto drawers
(Silver Metallic finish)> Drawer backs and bases> Adjustable feet
Supplied with:> 2 Ends> 2 Top rails> 1 Base> 1 Back> Fixing and mounting hardware> Alto drawers
(Silver Metallic finish)> Drawer backs and bases> Adjustable feet
Supplied with:> 2 Ends> 2 Top rails> 1 Base> 1 Back> Fixing and mounting hardware> Alto drawers
(Silver Metallic finish)> Drawer backs and bases> Adjustable feet
IMPACT CARCASE SYSTEM / FOR THE CABINET MAKING INDUSTRY - 07.14
6
Overhead cabinets
Wall cabinet Cat. No.
150 mm (150 x 300 x 720) 561.02.014
300 mm (300 x 300 x 720) 561.02.015
400 mm (400 x 300 x 720) 561.02.016
450 mm (450 x 300 x 720) 561.02.017
500 mm (500 x 300 x 720) 561.02.018
600 mm (600 x 300 x 720) 561.02.019
700 mm (700 x 300 x 720) 561.02.020
800 mm (800 x 300 x 720) 561.02.021
900 mm (900 x 300 x 720) 561.02.022
OVERHEAD CABINETS.
Supplied with:> 2 Ends> 1 Top> 1 Base> 2 Adjustable shelves> 1 Back> Fixing and mounting hardware> Salice hinges and mount plates> Shelf supports
Overhead corner cabinet
Wall corner cabinet Cat. No.
600 x 600 mm (600 x 600 x 720) 561.02.050
Supplied with:> 2 Ends> 1 Top> 1 Base> 2 Adjustable shelves> 1 Back> Fixing and mounting hardware> Salice hinges and mount plates> Shelf supports
Overhead rangehood cabinet Cat. No.
600 mm (600 x 300 x 545) 561.02.036
Supplied with:> 2 Ends> 1 Top> 1 Base> 1 Back> Fixing and mounting hardware> Salice hinges and mount plates
Overhead fridge cabinet
Overhead wall fridge cabinet Cat. No.
900 mm (900 x 300 x 400) 561.02.003
1000 mm (1000 x 300 x 400) 561.02.004
Supplied with:> 2 Ends> 1 Top> 1 Base> 1 Back> Fixing and mounting hardware> Salice hinges and mount plates> Duo flap stay set
Rangehood cabinet
7
TALL PANTRY CABINETS.
Supplied with:> 2 Ends> 1 Top> 1 Base> 1 Fixed shelf> 4 Adjustable shelves> 1 Back> Fixing and mounting hardware> Salice hinges and mount plates> Shelf supports> Adjustable feet
Supplied with:> 2 Ends> 1 Top> 1 Base> 1 Fixed shelf> 1 Back> Fixing and mounting hardware> Shelf supports> Adjustable feet
Supplied with:> 1 Left hand end> 1 Right hand end> 1 Top> 1 Fixed shelf> 4 Adjustable shelves> 1 Back, 961 mm> 1 Back, 977 mm> Fixing and mounting hardware> Salice hinges and mount plates> Shelf supports
Tall pantry cabinets
Tall pantry pull-out cabinet
Corner pantry cabinet ends
Tall pantry cabinet Cat. No.
450 mm (450 x 560 x 2200) 561.01.027
600 mm (600 x 560 x 2200) 561.02.029
900 mm (900 x 560 x 2200) 561.01.032
Tall pantry pull-out cabinet Cat. No.
300 mm (300 x 560 x 2200) 561.01.025
Cat. No.
Pack A - Ends, top and backs (1010 x 560 x 2350)
561.01.050
Pack B - Adjustable shelves (959 x 959) 561.01.051
IMPACT CARCASE SYSTEM / FOR THE CABINET MAKING INDUSTRY - 07.14
8
OVEN CABINETS.
Single oven tower cabinet
Double oven tower cabinet
Supplied with:> 2 Ends> 2 Base> 2 Back> 2 Top rails> 1 Adjustable shelf> 3 Fixed shelf> Fixing and mounting hardware> Salice hinges and mount plates> Adjustable feet> Shelf supports
Supplied with:> 2 Ends> 2 Base> 2 Back> 2 Top rails> 2 Adjustable shelf> 2 Fixed shelf> Fixing and mounting hardware> Salice hinges and mount plates> Adjustable feet> Shelf supports
Single oven tower cabinet Cat. No.
600 mm (600 x 560 x 2200) 561.01.011
Double oven tower cabinet Cat. No.
600 mm (600 x 560 x 2200) 561.01.014
9
Base oven cabinets
Supplied with:> 2 Ends> 2 Top rails> 1 Base> 1 Fixed shelf> Fixing and mounting hardware> Adjustable feet
Base oven cabinet Cat. No.
600 mm (600 x 560 x 720) 561.00.012
900 mm (900 x 560 x 720) 561.00.013
Microwave cabinets
Supplied with:> 2 Ends> 1 Top> 1 Base> 1 Back> Fixing and mounting hardware
Microwave cabinet Cat. No.
600 mm Aluminium edge (600 x 360 x 464) 561.02.001
600 mm White edge (600 x 360 x 464) 561.02.002
IMPACT CARCASE SYSTEM / FOR THE CABINET MAKING INDUSTRY - 07.14
10
LAUNDRY CABINETS.
Laundry base cabinets
Ironing board cabinet
Hamper base cabinet Cat. No.
450 mm (450 x 560 x 720) 561.01.018
600 mm (600 x 560 x 720) 561.01.020
Ironing board cabinet Cat. No.
450 mm (450 x 560 x 720) 561.01.016
Supplied with:> 2 Ends> 2 Top rails> 1 Base> 1 Back> Hamper unit> Flap stay> Fixing and mounting hardware> Salice hinges and mount plates> Adjustable feet
Supplied with:> 2 Ends> 2 Top rails> 1 Base> 1 Back> 1 Ironing board> Fixing and mounting hardware> Salice hinges and mount plates> Adjustable feet
Supplied with:> 2 Ends> 1 Top> 1 Base> 1 Back> 1 Fixed shelf> 4 Small shelves> 1 Vertical divider> Fixing and mounting hardware> Salice hinges and mount plates> Shelf supports> Adjustable feet
Tall broom laundry cabinets
Tall broom cabinet Cat. No.
600 mm (600 x 560 x 2200) 561.01.012
900 mm (900 x 560 x 2200) 561.01.015
11
LARGE VARIETY OF COLOURS AND STYLES
The IMPACT Project Door range offers a variety of choices and combinations to suit anyone’s design. Whether you are looking for a high gloss contemporary finish, a traditional look or anything in between.
Häfele IMPACT Project Doors are 18 mm thick with a white melamine back and are available in 7 standard colours with gloss, satin and textured finishes.
Contact your local Häfele representative for the complete program.
IMPACT PROJECT DOORS & PANELS.
IMPACT CARCASE SYSTEM / FOR THE CABINET MAKING INDUSTRY - 07.14
12
732.04.601 IMPACT CARCASE BROCHURE - 07.2014
Häfele Australia Pty. Ltd. | 8 Monterey Road | Dandenong | Victoria 3175Phone: 1300 659 728 | Fax: (03) 9212 2001 | Email: info@hafele.com.au
HÄFELE LOCATIONS: MELBOURNE I SYDNEY I NEWCASTLE I BRISBANE I ADELAIDE I LAUNCESTON I HOBART I PERTH
www.hafele.com.au