Post on 23-Dec-2015
description
2012a
Rescue Struts & Stabilization
Rescue Equipment www.junkyarddogindustries.com
2012 Catalog
800-574-8228
Junkyard Dog Industries Life-Saver Recognition
Junkyard Dog Industries has created a new program to recognize life-saving efforts performed
by our customers while utilizing Junkyard Dog Struts and Sidewinders during the extrication
effort. This recognition program will be called the “Life Saver” and will be awarded to the
crew or team in actual contact with the equipment at the rescue scene.
Criteria for the award consideration will be the following:
Use of the JYD Strut and/or Sidewinder devices in an actual emergency event where the
use was a factor in extricating or retrieving the casualty
The use of the JYD Strut and/or Sidewinder in an unusual circumstance or emergency event
that made the outcome positive
A department is requested to submit to JYD a detailed incident report explaining how the
equipment was utilized and listing the personnel involved to consider the incident worthy of
recognition. Additionally, any photographs of the incident would be helpful. When approved
the individual personnel will receive a certificate of recognition and a lapel pin indicating the
Life-Saving event. Additionally a decal will be sent to place on the apparatus that carries the
JYD equipment proclaiming the Life-Saving effort.
The incident will be displayed on the JYD website as well.
To submit a request for recognition, send to:
Junkyard Dog Industries
c/o Vicki Mullaly
440 Horsham Road
Suites 4 & 5
Horsham PA, 19044
Or email to: vickiem@cavtel.net
Bag sold separately
Third party tested to 15,000 lbs
Maximum rated up to 7,500 lbs
Third party tested to a rated
weight of 5,000 lbs
Third party tested to a rated
weight of 5,000 lbs
Junkyard Dog Industries has developed an optional base for
use with the SideWinder and Rescue Struts. Features are:
Designed for off-road or slippery conditions
Stainless Steel metal constructed with welded inner
guide
Fits all SideWinder, XTEND and ZSTRUT bases
14” x 7” dimension doubles footprint of SideWinder base
Strut base able to slide in guides for proper tensioning
Bottom displays stamped cleats for use on ice or slippery roads
Powder coated red for durability and visibility
Carry bag available
Cleat Base will be sold as an optional item.
Part #JYD-CLBS
STRUT EXTERIOR STORAGE BAG
Optional Equipment for Mounting Struts Outside Junkyard Dog Industries has developed an optional Exterior Storage Bag for Both Size Rescue
Struts. Features are:
Designed to protect the strut from environmental conditions
22oz. Poly Coated heavy duty Vinyl material is water resistant
Entry Zipper has rubber seal to ward-off bad weather
Back of bag reinforced with insert for additional strength
Bag includes both upper and lower mounting bracket
Pre-Punched Grommet holes for bracket placement
Available in two sizes (G-Force (S) and Nightmare (L))
Strut Storage Bag will be sold as an optional item.
Part #JYD450 S (G-Force)
Part #HJD450 L (Nightmare)
CLEAT BASE Optional Equipment for Sidewinder & Struts
Accessory Chain:
4ft x 9/32” Grade 100 adjustable
anchor chain
Tagged and certified
4300lb Working Load Limit
Labeled carrying Bag
TRY PULLING INSTEAD OF CUTTING
MINI PULLER KIT FOR FOOT ENTRAPMENT BY PEDALS
OTHER USES FOR KIT: COLUMNS; DOORS; ROOFS
Mini Lever Puller:
½ Ton Come Along
Compact, lightweight carbon steel design
Non slip rubber handle
High output, short handle for use in tight spaces
5ft, Grade 100, nickel-plated load chain
Free-chain mechanism
Load Chain Guide for smooth operation
Both hooks have notched safety latches
Meet ASME B30 every hoist is tested to 125% of rated capacity
Kit Consists of:
(3) Post Covers w/ Hook & Loop
(1) 24”x 24” Cover w/4 Magnets
(1) 24”x 60” Cover w/6 Magnets
Carry Bag w/Strap and Lid
For Protection of Rescuers and Patents during Extrications
Covers Posts and Other Jagged Edges
Durable Exterior—Made of 22oz. Poly Coated Vinyl
Strong Pliable Inner Material—Kovenex Aramid Material
New Bracket Kit for the JunkYard Dog Rescue
Struts Part #1090K:
PAC Handlelok
New JYD Base Holder
TM
LOWER CLEVIS KIT - Upgrade
The kit consists of the following:
1) Larger Red Powder Coated Clevis
2) 3.5” Grade 8 Bolt
3) Pinch Nut
4) Two Washers
5) Two Pieces of Reflective Tape
The current clevis can remain in place or removed – your choice.
If the upper clevis is removed, the two reflective tape pieces can
be applied to cover the 2 holes on either side of the strut.
“Keeping it Simple”
Solid See-Through Portable Panels
Designed to provide protection to an entrapped
victim inside a vehicle. Panel has hand-holds for
gloved hands to maneuver easily. .125” Clear Poly
Carbonate comes in single or double-hinged pan-
els. Each panel measures 21” x 24” with reflective
tape protection.
Single Panel JYD751
Double Hinged JYD752
Kit JYD753
RESCUE STRUT & SIDEWINDER
MOUNTING SYSTEMS
Mounts in Multiple Positions:
- Vertically Base Down
- Vertically Base Up
- Horizontally on Wall
- Horizontally on Tray
Fasten Bracket System on:
- Compartment Walls
- Trays and Dividers
- PAC TRAC Systems
Pre-Drilled Holes Allow Quick
Tested to 10 Times Weight of Strut
Doggie Bag
4 in 1 Screwdriver
Channel Locks
Cable Cutters
10” Adjustable Wrench
Pry Tool
Shears
Spring-Ring Window Punch
4 - Spare Hack Saw Blades
Seatbelt Cutter
4-Tire Valve Deflator/Inflators
12” Hack Saw
Windshield Saw & Center Punch
Kovenex Rapid Response Rescue Blanket
Bag Contents
Crash Bag
Accessory Bag for the JYD Rescue Struts
Carries additional components to assist in the use of the Res-
cue Struts and stabilization process. The bag holds the follow-
ing:
(2) Ratchet Straps w/20’ of webbing (Blue)
(2) Axle Straps (Blue)
(2) Open Hook Straps (Blue)
(2) Cluster Hooks
C-Hook on Webbing
Bag is weather resistant, fully enclosed lid, pockets for
accessories & has an adjustable carry strap.
This bag is designed for a 1st Responder or Rescuer to utilize as a first in tool at a vehicle crash. The JYD-CB contains the
basic tools and equipment to start initial stabilization and quick entry for patient assessment. The bag is made of heavy duty-
waterproof vinyl with full wrapped webbing handles. A three sided-dual zipper allows for quick-easy access to the contents.
Bright orange color and a large reflective band easily identifies the bag. The inside contains a removable tool board with sewn
in pockets for individual tools. A semi-removable divider holds additional large tools and secures the rescue blanket in place.
Altogether there are 16 industrial-quality tools carried in a bag that is 19” wide x 15.5” high x 4” thick weighing 13.5 pounds.
Rescue Chains
3000 lb. Chain Com-A long PART #JYD 20005
Come A Long Package 3000 lb. . . . . PART #JYD 20010
Includes: 3000 lb. Come A Long with 5 foot by 9/32” grade 80 chain
2 - Accessory Chains Adjustable 5 Foot by 9/32” grade 100 chain . . PART #JYD 20021 Adjustable 10 Foot by 9/32” grade 100 chain . . PART #JYD 20022
Above package with poly box PART #JYD 20015
Other Chain Accessories:
18 Feet of 3/8“ – G-100 with slip and grab hook . PART #JYD 20031 Cluster Hook Set . . . . . . PART #JYD 20034 J-Hook - 5 ft of 3/8” G-43 with Grab Hook . . . PART #JYD 20035
C-Hook - 5 ft of 3/8” G-43 with Grab Hook . . . PART #JYD 20036
Cheater - 3 Link 3/8” G-100 (27” Spreader) . . . PART #JYD 20037 Cheater - 28” 3/8” G-100 (27” Spreader) . . . PART #JYD 20038 Cheater - 3 Link 1/2” G-100 (32” Spreader) . . . PART #JYD 20045 Cheater - 32” 1/2” G-100 (32” Spreader) . . . PART #JYD 20046
Grade Information:
Grade 100 (AKA Grade 10 or G10)
Tagged with specs, serial number and Working Load Limit (WLL).
Includes certificate of origin and serial number.
Metal alloy safely elongates before breaking as a fail-safe and warning to stop.
WLL of 9/32” G-100 is 4,300 lbs. Breaking strength approx. 17,200 lbs.
WLL of 3/8” G-100 is 8,800 lbs Breaking strength approx.. 35,200 lbs
WLL of ½” G-100 is 15,000 lbs Breaking strength approx. 60,000 lbs
Grade 70
G-70 Cannot be tagged.
Upon reaching tensile strength, chain breaks without warning (no elongation)
WLL of 3/8” G-70 is 6,600 lbs. Breaking strength approx 26,400 lbs.
Grade 43
J-Hooks and C-Hooks are usually G-43.
Special order G-70 is available.
Neither can be tagged.
WLL of 3/8’ G-43 is 5,400 lbs. Breaking strength approx. 16,200 lbs.
Junkyard Dog Accessories
Junkyard Dog Accessories
PART #JYD.KIS.HAT
100% of the glove interior is insulated with 4 oz. Kovenex Fabric, Shock-
absorbing knuckle guard padding, Extended cuff for increased safety,
Elastic comfort-fit band, Reinforced finger and palm protection, Reinforced
finger webbing protection.
SIZES: Small, Medium, Large, X-Large, XX-Large PART # JYD-DF-GLV
Powder Coated Red Cold Rolled Steel
Welded Flat Head w/Rhino Coating
Formed Point
36” Length
1” Diameter
Reflective Bands
Designed to Meet Rescue Certifications
Ordering Info.
1” Steel Picket PART # JYD 20069
JYD Ball Cap
JYD-BTS-Z
Sizes: S– 2XL
Recip Saw Blade Holder
Accessory Pouch for Reciprocating Saws
Designed to strap onto any reciprocating saw and carry
additional blades. Hook & Loop straps adjust to any saw
body. A double pocket pouch holds either 9” or 6”
blades in separately. An enclosure holds and protects
the blades while on the saw.
Holder stores: (2) 9” and (2) 6” blades.
Dimensions: 13.25”(L) x 2”
Standard Colors: Black and Army Green
P/N: JYD480
JYD Extrication Glove
Front
Back
www.junkyarddogindustries.com
Kit #1 JYD-MIL K1
2652-20 M-18 1/2” Impact Wrench
48-11-1828 M-18 Lithium Battery
2710-20 AC/DC Charger
Kit #2 JYD-MIL K2
2602-20 M-18 Drill Driver
2652-20 M-18 1/2” Impact Wrench
2710-20 AC/DC Charger
2-48-11-1828 M-18 Lithium Ion Batteries
48-89-9105 1/4”- 3/4 Step Drill Bit
48-55-3500 Tool Bag Kit #3 JYD-MIL K3
2602-20 M-18 Drill Driver
2620-20 M-18 Sawzall
2710-20 AC/DC Charger
2-48-11-1828 M-18 Lithium Ion
Batteries
48-89-9105 1/4”-3/4: Step Drill Bit
JYD-480 Recip Saw Blade Holder
2-48-01-7712 6” 10TPI Recip Saw Blades
2-48-01-7713 9” 10TPI Recip Saw Blades
48-55-3500 Tool Bag
Kit #4 JYD-MIL K3
2602-20 M-18 Drill Driver
2652-20 M-18 1/2” Impact Wrench
2620-20 M-18 Sawzall
2710-20 AC/DC Charger
3-48-11-1828 M-18 Lithium Ion
Batteries
48-49-9105 1/4”- 3/4” Step Drill Bit
JYD-480 Recip Saw Blade Holder
2-48-01-7712 6” 10TPI Recip Saw Blades
2-48-01-7713 9” 10TPI Recip Saw Blades
48-55-3500 Tool Bag
Hi-Rise Packs
Designed for fast response hose transportation and storage solution.
When you need to get a house to a remote location or interior standpipe,
the Hi-Rise Hose Bag is tough enough and compact enough to get the
job done.
Voodoo1- 36” (L) x 8” (W) x 12” (H) 150 ft of 1-3/4” hose
Voodoo2- 36” (L) x 12” (W) x 10” (H) 150 ft of 1-3/4” hose
Junkyard Dog Accessories
800-574-8228
www.junkyarddogindustries.com
Hydraulic Hose Bag
Designed to hold ground-line sections of hydraulic rescue tool
hose to keep them properly coiled and to protect the couplings.
The material does not absorb mineral oil hydraulic fluid thus
keeping the bags from attracting dirt. Each bag is designed to
hold from 72 to 100 feet of hydraulic hose line, depending on
the manufacturer. A hook & barb strap secures the large open-
ing closed. Two carry handles provide easy maneuverability of
hoses, while a handle at the bottom allows quick release of the
hose line(s) from the bag.
Cribbing Bag
For plastic or wood cribbing, this bag can hold up to nine 4” x 4”
pieces. This four sided bag allows quick access to the cribbing
pieces, but keeps them secure during transport. Two double
adjustable straps with plastic clips hold the bag and contents
together. Carrying handles across the top are for walking and a
handle at the bottom front for removal from the apparatus com-
partment. Two small openings in the bottom corners allow
moisture run-off. Reinforced bottom for durability.
Dog House Bags
SideWinder Bag
This bag is designed to carry the SideWinder with the second
head and the speed handle in a convenient kit form. The inside
of the bag has a pocket for the speed wrench as well as a hook
& barb strap to hold the second head in place. The bag has
enough room to add a battery impact wrench as well as other
accessories. The Tuff Bottom gives this bag extra structure to
help it maintain its shape as well as keeping it from absorbing
fluids from the highway. The lid closes with a noncorrosive dou-
ble zipper. There are carrying handles as well as a reinforced
shoulder strap. The reflective striping makes the bag more visi-
Troll Bag
Compliments the High Rise Bags. Designed to carry additional
equipment such as rubber mallets, blind caps, spare wheels
and nozzles that may be required at a stand pipe or to extend a
hose line. Two double adjustable straps with plastic clips hold
the bag and contents together. A reversible inner liner doubles
as a cover. Reinforced shoulder strap with a hook & barb en-
closed protective cover allows easy mobility. A reinforced bot-
tom and partial sides for durability.
Back Step Bag
Carries supplies typical for hose evolutions: Hydrant adapters;
hydrant wrench; other necessary hose or hydrant equipment. A
flip lid with hook & barb enclosure allows full access to the bag
interior. Inside is a hook & barb enclosed pouch for small
equipment. A 57” adjustable shoulder strap secured with metal
spring clips on exterior metal rings and an exterior hydrant
wrench pocket is included.
Dimensions: 17.5”(w) x 10”(h) x 10.5”(d)
R.I.T. Bag
Designed for Rapid Intervention Teams to carry spare breath-
ing apparatus to a downed firefighter/rescuer. Two attached
compartments hold: A 60 minute compressed air cylinder; A
second stage regulator, 30 feet of air hose, and additional rapid
intervention equipment to supply a trapped victim. Hook & barb
enclosures w/tabs secure the openings to each compartment.
A reinforced opening between the 2 compartments permits the
hose line to travel from the cylinder to the supply device. An
adjustable 40.5” reinforced/padded shoulder strap has metal
Dog House Bags
Rotary Disc Saw Blade Bag
This bag is designed to hold up to 3 16” rotary saw blades in
protective compartments made of heavy duty vinyl coated poly-
ester. For on-the-go use, either metal, masonry, ordinary mate-
rial or the new super aggressive cutting blades can be carried
safely and conveniently to the saw. A small exterior pouch can
store a blade wrench. Full top overlapping lid with hook & barb
closure keeps dirt and moisture out of the bag.
Dimensions: 19.5”(w) x 17.5”(h) x 2”(d)
Shoulder Strap: 26” Reinforced and padded
Standard Color: Red
P/N: JYD325
LDH Wrench Pouch
Designed to hold a hydrant wrench on the end of a large diam-
eter hose. Three hook & barb connecting straps hold the
pouch onto a 3”, 4” or 5” hose section. A hook & barb enclosed
lid secures the wrench inside. Reinforced bottom for durability.
Dimensions: 23.5”(w) x 7.5”(h)
Standard Color: Orange
P/N: JYD125
Material Specifications
22 oz. vinyl-coated polyester.
Choice of four colors: yellow, red, blue, and orange.
UV Resistant.
Won’t crack in severe cold.
100% Waterproof fabric.
Reinforced wear points.
Heavy-duty 2” webbing shoulder length straps with strap closure.
Heavy-duty 2” webbing closure straps with “fast-tech” closures.
Additional webbing grab handles on each end.
Warranty: Hi-Rise Hose Bags carry a limited lifetime warranty.
Dog House Bags
www.junkyarddogindustries.com 800-574-8228
440 Horsham Road, Suites 4 & 5
Horsham, PA 19044
1-800-574-8228
www.junkyarddogindustries.com
Distributed By: