Post on 17-Aug-2020
uPVC Fittings
BS5255 • BS4514 • BS4660 • BSEN1329 • BSEN1401uPVC Soil • Waste & Sewer Fittings
A.A.Juma Plastic Pipes & Fitting Ind. Co. L.L.C.
ISO 9001 : 2008
TheSystem
- Access Cap- Balcony Outlet- Boss Pipe-Connector- Cross Tee- Cross Y- Door Elbow- Door Socket- Door Tee- Elbow- Elbow MM- End Cap- Female Elbow- Female Socket- F-Trap 4x3x2” Machal Pain- F-Trap 4 x 3”- Gully Trap- Japan Elbow- Japan End Cap- Jally H/D- Jally L/D- Japan Socket- Japan Tee- P-Trap- Reducer Bush- Rodding Eye-Cover- Rubber Push Elbow- Rubber Push Socket- Rubber Push Tee- Rubber Push Y- Reducer Tee- Reducer Y- Rain Water Outlet- Socket- Tee- Tee MM- Vent Cowl- Y Tee- Y MM- W.C. Seat Cover
- 32mm - 110mm x 82mm - 110mm x 82mm x 54mm
- Big Access - I/O Check - No Su�x - Long Bend - Male / Female - Male / Male
Ahmed Abdulla Juma Plastic Pipes and Fittings Industrial Company ( ) is a major manufacturer of uPVC (Unplasticised Polyvinyl Chloride) in Dubai, U.A.E. and it has continued progress, successfully devel-oping in many export markets. Our comprehensive range of quality uPVC Soil, Waste and Sewer Fittings are manufactured in accordance to the requirement British Standard BS4514, BS5255, BS4660. Constant care is taken to maintain this high standard of quality for all our products.
It is now accepted that there are many economic advantages when using uPVC Pipes and �ttings. They are lightweight, resistant to a wide variety of chemicals, do not support combustion, they are impervious to bacteria and fungi attack and are not subjected to electrolytic corrosion. The �ttings have a high impact strength which helps prevent damage during handling or assembly. All parts are assembled easily using the simple technique of cold solvent cement welding, together with the use of seal ring joints to accom-modate thermal movement, there will be considerable economy in labors and materials.
Installation of products in any plumbing system should be made with reference to the relevant building codes and after obtaining relevant authority approvals.
Code NumbersTo facilitate speci�cation, ordering and stocking, each item in our system has a code number. The system of numbering is very simple, and is based on a build up of recognizable, but abbreviated information, as follows :Component Type:
ACBBPCRTCRYDEDSDTEEMENFEFSF.T.FtGtJEJECJHJLJSJTPtRBRORPERPSRPTRPYRT RY RWS T TM VC Y YM W/C
Angle
45°90°92°
Size
1¼”4” x 3”4” x 3” x 2”
Su�x
BAD F/FL MFMM
1
Characteristicsof the
Material
Material Characteristics
LightnessuPVC is approximately half the weight of copper pipes, one-�fth of the weight of steel pipes & one-tenth the weight of cast iron pipes. Transport and handling is therefore both simple and convenient.
Chemical ResistantThe excellent chemical resistance of uPVC to acids, alkalis, oxidizing and reducing agents makes it particu-larly suitable for a wide range of industrial application. Generally uPVC is resistant to most oils, fats, alcohols and aromatic-free petrol, but is unsuitable for use with aromatic and chlorinated hydrocarbons, ketones, esters & cyclic ethers which lead to marked swelling and softening of the material.
High Flow RateThe internal surface of uPVC pipe �ttings is “extremely smooth” equivalent to manning and kutter coe�-cient of 0.0010, giving excellent �ow properties which remain constant due to reduced build-up of scale.
FlammabilityuPVC does not support combustion
Non-conductivityuPVC is non-conductor of electricity & is therefore not subject to galvanic or electrolytic action.
Weather ResistanceThe D.rain range is manufactured from a specially formulated uPVC compound, developed in many years of trial, resulting in a tough resilient material with excellent outdoor weathering performance.
Low Installation CostTight dependable connections are made by solvent cement welding of uPVC pipes and �ttings. This com-bined with other advantages of lightness, �exibility and the use of pre-fabrication techniques, can a�ord savings both in time and money. As it is the case with all materials, certain characteristics need to be considered during installation. Similarly, before installing uPVC it is necessary to take into account the following properties.
E�ect of Low TemperatureThe impact strength of uPVC pipes �ttings decreases with decreases with reduction in temperature there-fore increased care should be exercised if installation is carried out near 0°C.
E�ect of Elevated TemperatureThe uPVC remains stable under load to a temperature of approximately 75°C and is therefore satisfactory for use in soil or waste systems where continuous full bore discharges of e�uent are unlikely to exceed this �gure. The low thermal conductivity of the material does allow full bore discharges at higher temperatures provided the duration of discharge is limited to 2-3 minutes.
Specialized ApplicationsThe systems are more than adequate for normal domestic applications in low and multi-rise dwellings. Where more specialized applications such as tea-makers, autoclaves, hospitals, industrial kitchens and laboratories are concerned, where prolonged discharges of liquids at elevated temperatures can occur, our technical department should be concerned.
2
Supports foruPVC
Pipelines
Thermal MovementuPVC has coe�cient of linear expansion of 7 x 10 C°. This means that 1 meter of uPVC pipe will expand approximately 0.7mm per 10C° rise in temperature of the pipe material. However, due to the short duration of most e�uent �ows and the slow temperature of the pipe material. However, due to the short duration of most e�uent �ows and the slow temperature response of the material, the greatest thermal take place due to variation in environment temperature rather than the e�ect of hot e�uent discharge. Successful accom-modation of thermal movement is dependant on the controlled direction and distribution of this move-ment.The following information is intended as a general guide & reference should be made to the relevant code practice issued by the appropriate statutory authority.
Unless thermal movement can be accommodated by alternate means, expansion joints should be �tted. Maximum spacing intervals for locating expansion joints are 6 meters for cold pipelines and 4 meters for hot pipelines. The maximum length of pipeline between �xed points should be 2 meters for cold pipelines and 1 meter for hot pipelines.
Vertical SWV stacks and discharge pipes should have expansion joints located on each �oor where �xtures or branch lines are connected, directly above the highest branch connection. They should also be located at the base of a stack or at the end of a drain connection for a discharge pipe if the length of pipe between �xed point exceeds the distances stated above.
On Graded Pipelines expansion joints should be places immediately upstream of the entry to a vertical stack pr other graded line, & immediately upstream of each change of direction in graded lines.
Expansion joints may be omitted in the following locations:1. At the top �oor of a stack where the stack is free to move through a weather proofed sleeve through the roof.2. At the base of an external stack connected to a drainage trap where the stack is free to move through a sleeve �tted in the drain connection.3. At a junction or bend in a graded pipeline where the thermal movement in the pipeline can be accommo-dated by de�ection of the o�set leg without a�ecting the grade of the pipeline, subject to the length of the pipeline & o�set leg. Supporting of the pipe shall not impede expansion movement in such cases.
Table 1. Alternative Expansion Provision
32/40/50
65/80/100
150
2346
2346
2346
0.500.600.801.00
0.751.001.101.20
1.001.101.201.20
Normal Sizeof Pipe (mm)
Maximum PipeLength(L) (Meters)
Maximum PipeLength (L) (Meters)
3
Supports foruPVC
Pipelines Table 2. Maximum Spacing of Pipe Supports For Material Temperature up to 45°C
Supports for uPVC Pipelines
Fixed SupportsThe purpose of a �xed support is to retain all movement and to provide a �xed point in the installation. The clip or support shall be securely attached to the �ttings, located in the clamping groove where provided.
Sliding SupportsThe purpose of a sliding support or clip is to provide a guide without restraint on axial movement of the pipe.
Location of SupportsRefer Table 2uPVC pipe shall be supported at intervals dependent on the maximum temperature likely to be reached by the material.
uPVC Pipes through Walls and FloorsAny pipe or �tting built into a wall or �oor shall either be lagged with a suitable �exible material not less than 6mm thick, or pass through a sleeve providing an annular clear space of not less than 6mm, so as to permit the pipe to be sealed in position without restricting axial movement of the pipe.
Conversion Factors (Approximate)
Length
Volume(Fluids)
Mass
Pressure
Temperature
1 inch = 25.4 mm1 feet = 305 mm1 yard = 0.914 m1 mile = 1.61 km
1 � oz (UK) = 28.4 ml1 pint (UK) = 568 ml1 gallon (UK) = 4.55 ml
1 mm = 0.039 in1 m = 3.28 ft1 m = 1.09 yrd1 km = 0.62 mile
1 ml = 0.035 � oz(UK)1 L = 1.76 pint (UK)1 m³ = 220 gallons(UK)
1 ml = 0.034 � oz (US)1 L = 2.11 pint (US)1 L = 0.264 gallon(US)
1 � oz (US) = 29.6 ml1 pint (US) = 473 ml1 gallon (US) = 3.79 ml
1 oz = 28.3 g1 lb = 454 g1 ton = 1.02 tonne
1 g = 0.035 oz1 kg = 2.20 lb1 tonne = 0.984 ton
1 kPa = 0.145 psi1 kPa = 0.01 kgf/cm²1 Pa = 0.004 H2O1 kPa = 0.01 bar
1 psi = 6.89 kPa1 kgf/cm² = 98 kPa1 in H2O = 249 kPa1 bar = 100 kPa
°C = 5/9 (°F - 32) °F = 9/5 (°C) + 32
Quantity Imperial to Meter Imperial to Meter
3240/50
65 to 150
0.91.01.2
1.82.02.5
Normal Sizeof Pipe (mm)
Maximum PipeLength(L) (Meters)
Maximum PipeLength (L) (Meters)
4
ProductCode Color
Nom. Sizemm (min.)
ProductCode Color
Nom. Sizemm (min.)
Dimension (mm)D A
AC008
AC001
AC003
AC005
AC006
-
Flat - 1½” x 2“
Vertical - 1½”
Horizontal - 2”
50
-
-
110
-
-
No. 01 UPVC ACC Cap
No. 02 UPVC Balcony Outlet
No. 04 UPVC Boss Pipe Connector
White, Gray
White, Gray
White, Gray
Gray, Red
Gray, Red
Gray, Red
White
ProductCode Color
Nom. Sizemm (min.)
Dimension (mm)
4“ x 1½”
4“ x 2”
6” x 1½”
6” x 2”
No. 03 Boss Connector
Gray
Gray
Gray
Gray
ProductCode Color
Dimension (mm)H1 H2 H3 L L1 L2 L3 S1 S2
Nom. Sizemm (min.)
Single Socket - 4”
Double Socket-4“ x 4”
Gray
Dimension (mm)H1 L1
1¼”
1½”
2”
3”
4”
6”
54
62
71
100
114
-
23
28
30
45
52
-
-
BJ001
BJ002
BP001 50.5 27 29 209 115.5 117.5 108.5 86.5 84
5
Solvent Fittings
92
-
ProductCode Color
Nom. Sizemm (min.)
Dimension (mm)H1 L1 L2 L3
Anglea°
45
45
Anglea°
-
CRT 4”
3”
4”
52
-
239
-
134
-
120
-
No. 05 UPVC Cross Tee
No. 06 UPVC Cross Yee
No. 08 UPVC Door Socket
Gray, Red
Gray, Red
ProductCode Color
Nom. Sizemm (min.)
Dimension (mm)H1 L1 S1 S2 S3
CRY 4”
CRY 3”
DE001
DE003
DE005
-
-
4”
3”
45 259 205 75 129.5Gray, Red
Gray, Red
ProductCode Color
Nom. Sizemm (min.)
Anglea°
Dimension (mm)H1 H2 L1 L2
3”
4”
6”
8”
8”
92
92
92
45
90
52
52
52
-
-
/
/
/
/
/
112
112
112
-
-
120
120
120
-
-
No. 07 UPVC Door Elbow
Gray, Red
Gray, Red
Gray, Red
Gray, Red
Gray, Red
DS3
DS4
DS6
DS8
ProductCode Color
Nom. Sizemm (min.)
Dimension (mm)H1 L1 S1
3”
4”
6”
8”
46
52
77
-
212
256
312
-
83
105
132
-
Gray, Red
Gray, Red
Gray, Red
Gray, Red
6
ProductCode Color
Nom. Sizemm (min.)
Anglea°
ProductCode Color
Nom. Sizemm (min.)
Anglea°
3”
4”
6”
8”
1¼”
1½”
1½”
2”
3”
4”
6”
8“
10”
2”
4”
6”
92
92
92
92
92
92
90
92
92
92
92
92
92
90
90
90
No. 09 UPVC Door Tee
No. 11 UPVC Elbow
Gray, Red
Gray, Red
Gray, Red
Gray, Red
White, Gray
White, Gray
White, Gray
White, Gray
White, Gray
Gray, Red
Gray, Red
Gray, Red
Gray, Red
Gray, Red
Gray, Red
Gray, Red
Gray, Red
Gray, Red
Gray, Red
Gray, Red
Gray, Red
ProductCode Color
Nom. Sizemm (min.)
Anglea°
1¼”
1½”
2”
3”
4”
6”
8”
10”
45
45
45
45
45
45
45
45
No. 12 UPVC Elbow
White, Gray
White, Gray
White, Gray
Dimension (mm)H1 L1 L2 L3
46
52
77
224
239
380
115
134
223
114
120
210
E001
E002
-
E003
E004
E007
E009
-
-
-
-
-
E015
E017
E01P
-
-
-
-
-
Dimension (mm)H1 H2 L1 L2
26
30
-
32
46
52
77
-
-
-
-
-
/
/
/
/
/
/
/
/
/
/
/
/
50
62
-
74
109
120
200
-
-
-
-
-
53
62
-
74
112
121
203
-
-
-
-
-
24
27
31
46
52
77
/
/
/
/
/
/
35
38
44
78
83
130
35
42
44
82
83
131
Dimension (mm)H1 H2 L1 L2
DT001
DT003
DT005
-
ProductCode Color
Nom. Sizemm (min.)
Anglea°
4” 45
No. 10 UPVC Door Yee
Gray, Red
Dimension (mm)
-
7
ProductCode Color
Nom. Sizemm (min.)
Anglea°
Dimension (mm)
ProductCode
4”
No. 14 UPVC End Plug
No. 15 UPVC Female Elbow
Gray, Red
ProductCode Color
No. 16 UPVC Nipple Socket
White, Gray
White, Gray
White, Gray
F-E001
-
-
-
Anglea°
-
ColorNom. Sizemm (min.)
1½” x 1½”White, Gray
Dimension (mm)L L1 D1 D2 H1 H2 S1 S2
82.5 58 57 48 25 18 24 54
Nom. Sizemm (min.)
Dimension (mm)
1¼”
1½”
2”
Anglea°
-
-
-
ProductCode Color
No. 17 UPVC Female Socket
White, Gray
White, Gray
-
-
Nom. Sizemm (min.)
Dimension (mm)
1½” x 1½”
1½” x 2”
Anglea°
-
No. 13 UPVC End Cap
ProductCode Color
Nom. Sizemm (min.)
2”
3”
4”
6”
8”
White, Gray
Gray, Red
Gray, Red
Gray, Red
Gray, Red
EN001
EN003
EN005
EN006
-
Dimension (mm)L S
62.5
90
/
/
/
28
28
/
/
/
8
No. 18 UPVC Floor Trap
ProductCode Color
Nom. Sizemm (min.)
Anglea°
Dimension (mm)H1 L L1 S1 D1 D2 D3
-
4”x 3”x 1½” - T/Type
4”x3”x2”x1½”-MC -Type
4”x 3”x 1½” - B/Type
4”x 3”x 1½” - Short
4”x 3”x 2” - Short
4”x 3”x 1½” - D/Seal
4”x 3”x 2” - D/Seal
88.5
-
-
-
-
-
-
-
26
-
-
-
-
-
-
-
180
-
-
-
-
-
-
-
110
-
-
-
-
-
-
-
114
-
-
-
-
-
-
-
117
-
-
-
-
-
-
-
110
-
-
-
-
-
-
-
103
-
-
-
-
-
-
-
GrayFT 4 x 3
-
-
-
-
-
-
-
T/Type
4” x 3” x 2” - D/Seal 4” x 3” x 1½” - B/Type4” x 3” x 2 x 1½” - MAC-Type Short Type
ProductCode Color
Nom. Sizemm (min.)
No. 19 UPVC F.Trap Cover H.D. & UPVC F.Trap Cover L/D
15” x 15“ H/D
15” x 15” H/D/02
20” x 20” H/D
15” x 15” Mac Type
15” x 15” Mac Type 02
15” x 15” Taiwan Model
20” x 20” Taiwan Model
Dimension (mm)
No. 20 UPVC Gully Trap Bottle Type
GT001
GT002
ProductCode Color
Nom. Sizemm (min.)
Dimension (mm)H1 H2 W1 D1 D2 S1 S2
6” x 4”
6” x 4” x 4”
6” x 4”
6” x 4” x 4”
289
289
130.2
130.2
254.7
254.7
188.7
188.7
159.6
159.6
102.3
102.3
111.2
111.2
Red
Red
9
No. 22 P/Trap
ProductCode Color
Nom. Sizemm (min.)
4”
Dimension (mm)H1 S1 L1
248.3 194 238.5RedPt-4”
ProductCode Color
Nom. Sizemm (min.)
Anglea°
ProductCode Color
Nom. Sizemm (min.)
Anglea°
4”
4”
-
-
Dimension (mm)
No. 23 UPVC V/Trap
No. 24 UPVC Hopper Trap
Red
Red-
Dimension (mm)
-
No. 25 Pipe Fixing Bracket
ProductCode Color
Nom. Sizemm (min.)
3”
4”
Gray
Gray
Dimension (mm)Anglea°
ProductCode
No. 26 Rain Water Outlet
Dome Large-3”
Dome Large-4”
Dome Small-3”
Flat Type
Side Parapet
Dome Medium
ColorNom. Sizemm (min.)
3”
4”
3”
3”
3” & 4”
4”
Gray
Gray
Gray
Gray
Gray
Gray
Dimension (mm)
-
-
ProductCode Color
Nom. Sizemm (min.)
Dimension (mm)
6” x 4” x 4” x 4”
No. 21 UPVC Gully Trap - H/D with rubber
Red
10
ProductCode Color
Nom. Sizemm (min.)
Anglea°
Dimension (mm)H1 L1
1” x 1½”
1¼” x 1½”
1½” x 2”
2” x 3”
2” x 4”
3” x 4”
4” x 6”
8” x 6”
10” x 8”
-
Dimension (mm)
15” x 15“ x 4”
15” x 15” x 3” x 4”
6” x 4”
No. 27 UPVC Reducer Bush
Gray
White, Gray
White, Gray
Gray, Red
Gray, Red
Gray, Red
Gray, Red
Gray, Red
Gray, Red
White, Black
White, Black
Black
ProductCode Color
Nom. Sizemm (min.)
No. 28 UPVC Rodding Eye Cover
No. 29 UPVC Reducer Tee
Gray, Red
Gray, Red
4” x 2”
6” x 4”
ProductCode Color
Nom. Sizemm (min.)
ProductCode
No. 30 UPVC Reducer Yee
Dimension (mm) H1 H2 L1 S1 S2 S3
Anglea°
6” x 4”
ColorNom. Sizemm (min.)
Gray, Red
-
39
33
45
51
54
56.5
-
-
-
0
5
9
23
10
21
-
-
Dimension (mm) H1 H2 L1 L2 L3
77 52 318 173 166
Anglea°
-
92
45 77 52 380 256 115 180
11
No. 31 UPVC Socket
ProductCode
S011
S002
S003
S005
S007
S009
-
-
T001
T002
T004
T005
T007
T010
-
-
-
ProductCode Color
Nom. Sizemm (min.)
Dimension (mm)H1 L1 L2 L3
1¼”
1½”
2”
3”
4”
6”
6“
8”
10”
No. 32 UPVC Tee
No. 33 Vent Cowl
Color
Gray
Gray
Gray, Red
Gray
ColorNom. Sizemm (min.)
Dimension (mm)H1 L1
1¼”
1½”
2”
3”
4”
6”
8”
10”
24
27.5
30”
46”
52”
77”
-
-
52
58
63
96
107
158
-
-
White, Gray
White, Gray
White, Gray
Gray, Red
Gray, Red
Gray, Red
Gray, Red
Gray, Red
White, Gray
White, Gray
White, Gray
Gray, Red
Gray, Red
Gray, Red
Gray, Red
Gray, Red
Gray, Red
Anglea°
92
92
92
92
92
92
90
92
92
52
58
69
114
120
210
-
-
-
62
67
71
115
134
223
-
-
-
109
111
129
224
239
380
-
-
-
25
27
31
46
52
77
-
-
-
ProductCode
VC001
VC002
VC003
-
Nom. Sizemm (min.)
2”
3”
4”
6”
Dimension (mm) H1 L1 S1
18
20
26
-
33
38
52
-
76
80
104
-
Color
No. 34 UPVC Yee
ProductCode Color
Nom. Sizemm (min.)
Anglea°
Dimension (mm)H1 L1 S1 S2 S3
1¼”
1½”
2”
3”
4”
6”
YT001
YT002
YT003
YT005
YT007
YT009
White, Gray
White, Gray
White, Gray
Gray, Red
Gray, Red
Gray, Red
45
45
45
45
45
45
27
30
36
45
52
78
108
122
172
225
276
400
90
110
137
177
219
313
30
40
51
70
84
116
55
60
86
108
130
200
12
ProductCode Color
Nom. Sizemm (min.)
Anglea°
No. 35 WC Connector
WC Seat Cover
Dimension (mm)
Multi-Quick 00
Multi-Quick 02
Multi-Quick 04
Mac Type
Mac Type
Mac Type
Mac Type
00
02
04
-
00
02
04
No. 36 USA Model
No. 38 Heavy Duty D.rainNo. 39 RAK Model Medium (ARWA)
No. 40 RAK Model Heavy (SALMA)
No. 37 Italy Model
13
Dimension (mm)
4“
No. 42 PVC Elbow
Gray
ProductCode Color
Nom. Sizemm (min.)
No. 41 PVC End Cap
ProductCode
Anglea°
Dimension (mm)
-
Anglea°
ColorNom. Sizemm (min.)
1½”
2”
3”
4”
Gray
Gray
Gray
Gray
ProductCode
No. 43 PVC Socket
Dimension (mm)Anglea°
-
ColorNom. Sizemm (min.)
4”Gray
No. 44 PVC TeeProduct
CodeAngle
a°Dimension (mm)
ColorNom. Sizemm (min.)
1½”
2”
3”
4”
Gray
Gray
Gray
Gray
PVC FITTING AS PER JAPAN OR THAILAND STANDARD
14
No. 45 UPVC Door Elbow
No. 47 UPVC Door Tee
ProductCode
ProductCode
No. 46 UPVC Door Socket (Access Pipe)
ProductCode Color
Nom. Sizemm (min.)
3”
4”
6”
8”
Gray, Red
Gray, Red
Gray, Red
Gray, Red
ProductCode Color
Nom. Sizemm (min.)
No. 48 UPVC Door Yee
Anglea°
UPVC Soil Fittings (Single Spigot Rubber Push)
ColorNom. Sizemm (min.)
Anglea°
Dimension (mm)D1 d1 D2 d2 L1 L2 L3
3”
4”
6”
8”
107
135
-
-
82
110
-
-
82
110
-
-
76
102
-
-
60
70
-
-
225
275
-
-
200
245
-
-
Dimension (mm)
Gray, Red
Gray, Red
Gray, Red
Gray, Red
87½
87½
87½
87½
Anglea°Color
Gray
Gray
Nom. Sizemm (min.)
3”
4”
-
Dimension (mm)
Anglea°
87½
87½
-
-
6”
8”
Gray, Red
Gray, Red
15
Anglea°
ProductCode Color
No. 49 UPVC V Trap
Red
Nom. Sizemm (min.)
4”
Dimension (mm)
Dimension (mm)D1 d1 D2 d2 L1 L2 L3
107
135
-
-
82
110
-
-
82
110
-
-
76
102
-
-
60
70
-
-
276
265
-
-
195
120
-
-
ProductCode
No. 51 UPVC Elbow 45°
ProductCode Color
Nom. Sizemm (min.)
No. 50 UPVC Elbow 87.5°
Anglea°
Dimension (mm)D1 d1 D2 d2 L1 L2 L3
107
135
-
-
82
110
-
-
82
110
-
-
76
102
-
-
60
70
-
-
225
275
-
-
200
245
-
-
3”
4”
6”
8”
87½
87½
87½
87½
Gray, Red
Gray, Red
Gray, Red
Gray, Red
ColorNom. Sizemm (min.)
Anglea°
Dimension (mm)D1 d1 D2 d2 L1 L2 L3
3”
4”
6”
8”
107
135
-
-
82
110
-
-
82
110
-
-
76
102
-
-
60
70
-
-
175
205
-
-
137
170
-
-
Gray, Red
Gray, Red
Gray, Red
Gray, Red
45
45
45
45
No. 52 UPVC Reducer Socket
ProductCode Color
Nom. Sizemm (min.)
4” x 3”
6“ x 4”
8” x 4”
8“ x 6”
Gray
Gray, Red
Gray, Red
Gray, Red
ProductCode Color
Nom. Sizemm (min.)
No. 53 UPVC Reducer Tee
Anglea°
Dimension (mm)
6” x 4”
8” x 6”
Gray, Red
Gray, Red
16
ProductCode Color
Nom. Sizemm (min.)
No. 54 UPVC Reducer Door Tee
Anglea°
Dimension (mm)
6” x 4”
8” x 6”
Gray, Red
Gray, Red
Dimension (mm)D1 d1 D2 d2 L1 L2 L3
106
-
-
-
82
-
-
-
110
-
-
-
104
-
-
-
60
-
-
-
140
-
-
-
123
-
-
-
ProductCode
No. 58 UPVC Yee
ColorNom. Sizemm (min.)
Anglea°
Dimension (mm)D1 d1 D2 d2 L1 L2 L3
3”
4”
6”
8”
107
135
-
-
82
110
-
-
82
110
-
-
76
102
-
-
60
70
-
-
175
205
-
-
137
170
-
-
Gray
Gray
Gray
Gray
45
45
45
45
ProductCode
No. 59 Inspection Chamber
Color RiserFrame
+Cover
Dimension (mm)A B C D E
No. 56 UPVC Socket
ProductCode Color
Nom. Sizemm (min.)
3”
4”
8”
Gray, Red
Gray, Red
Gray, Red
Anglea°
ProductCode
No. 57 UPVC Tee
ColorNom. Sizemm (min.)
3”
4”
6”
8”
Gray, Red
Gray, Red
Gray, Red
Gray, Red
Dimension (mm) D1 d1 L1
107
135
-
82
110
-
110
120
-
Anglea°
Dimension (mm)D1 d1 D2 d2 L1 L2 L3
107
135
-
-
82
110
-
-
82
110
-
-
76
102
-
-
60
70
-
-
276
265
-
-
195
120
-
-
87½
87½
87½
87½
ProductCode Color
Nom. Sizemm (min.)
No. 55 UPVC Reducer Yee
Anglea°
Dimension (mm)
6” x 4”
8” x 6”
Gray, Red
Gray, Red
Red 320 x 60mm 30 x 30 240 440 370 100 320
17
C
B
A
D
Dimension (mm)
4”
6”
8”
45
45
45
Gray, Red
Gray, Red
Gray, Red
ProductCode Color
Nom. Sizemm (min.)
No. 60 UPVC Elbow
No. 65 UPVC Reducer Tee
ProductCode
Anglea°
ColorNom. Sizemm (min.)
Anglea°
Dimension (mm)
6” x 4“
8” x 6“
Gray, Red
Gray, Red
Dimension (mm)
6”
8”
45
45
Gray, Red
Gray, Red
ProductCode Color
Nom. Sizemm (min.)
No. 61 UPVC Door Elbow
Anglea°
UPVC Soil Fitting Rubber Push (Double Socket)
Dimension (mm)
6”
8”
92
90
Gray
Gray, Red
ProductCode Color
Nom. Sizemm (min.)
No. 62 UPVC Door Tee
Anglea°
Dimension (mm)
3”
4”
6”
8”
Gray, Red
Gray, Red
Gray, Red
Gray, Red
ProductCode Color
Nom. Sizemm (min.)
No. 63 UPVC Socket
Anglea°
ProductCode
No. 64 UPVC Tee
ColorNom. Sizemm (min.)
Anglea°
Dimension (mm)
4”
6”
8”
Gray, Red
Gray, Red
Gray, Red
87½
87½
87½
18
ProductCode
Dimension (mm)
No. 66 UPVC Reducer Door Tee
6” x 4“
8” x 6“
Gray, Red
Gray, Red
Anglea°Color
Nom. Sizemm (min.)
ProductCode
Dimension (mm)
No. 67 UPVC Reducer Yee
6” x 4“
8” x 6“
Gray, Red
Gray, Red
Anglea°Color
Nom. Sizemm (min.)
ProductCode
Dimension (mm)
No. 68 UPVC Repairing Socket
3“
4“
6”
Gray, Red
Gray, Red
Gray, Red
Anglea°Color
Nom. Sizemm (min.)
ProductCode
Dimension (mm)Anglea°Color
Nom. Sizemm (min.)
92
92
90
4“
6“
8”
No. 69 UPVC Elbow
ProductCode
Dimension (mm)Anglea°Color
Nom. Sizemm (min.)
90
90
6“
8”
No. 70 UPVC Door Elbow
ProductCode
Dimension (mm)Anglea°Color
Nom. Sizemm (min.)
87½˚
45
45
45
4“
6“
8”
No. 71 Double Rubber Yee
Gray, Red
Gray, Red
Gray, Red
Gray, Red
Gray, Red
Gray, Red
Gray, Red
Gray, Red
19
ProductCode Color
Nom. Sizemm (min.)
Dimension (mm)
No. 05 UPVC Female Socket
Anglea°
50 mm x 1½”
No. 01 UPVC Elbow
ProductCode
ProductCode
No. 02 UPVC Vent Cowl
MM Fittings
ColorNom. Sizemm (min.)
Anglea°
Dimension (mm)
50 x 90 mm
75 x 90 mm
75 x 92 mm
Light Gray
Light Gray
Light Gray
Light Gray
Light Gray
Anglea°Color
Nom. Sizemm (min.)
50 mm
75 mm
Dimension (mm)
ProductCode Color
Nom. Sizemm (min.)
Anglea°
No. 06 UPVC Tee
Dimension (mm)
50 mm
75 mm
Light Gray
Light Gray
Light Gray
Light Gray
Light Gray
Light Gray
Light Gray
No. 03 UPVC Elbow
ProductCode Color
Nom. Sizemm (min.)
50 x 45 mm
75 x 45 mm
Anglea°
ProductCode Color
Nom. Sizemm (min.)
No. 04 UPVC Socket
Anglea°
Dimension (mm)
50 mm
75 mm
20
ProductCode Color
Nom. Sizemm (min.)
ProductCode Color
Nom. Sizemm (min.)
Anglea°
Anglea°
Dimension (mm)
No. 09 UPVC Access Plug
No. 10 UPVC Door Elbow
ProductCode Color
No. 11 UPVC Door Socket
Dimension (mm)
Nom. Sizemm (min.)
75 mm
Dimension (mm)
Anglea°
75 x 90 mm
50 mm
75 mm
No. 08 UPVC Reducer Bush
ProductCode Color
Nom. Sizemm (min.)
110 x 50 mm
75 x 50 mm
Dimension (mm)Anglea°
Anglea°
ProductCode Color
No. 07 UPVC Yee
Nom. Sizemm (min.)
50 mm
75 mm
Dimension (mm)
Light Gray
Light Gray
Light Gray
Light Gray
Light Gray
Light Gray
Light Gray
Light Gray
21
ProductCode Color
Nom. Sizemm (min.)
Anglea°
Dimension (mm)
No. 13 UPVC Cross Tee
No. 15 UPVC Floor Trap
ProductCode Color
ProductCode Color
No. 14 UPVC F/Trap
Nom. Sizemm (min.)
110 x 75 x 50 mm
Dimension (mm)
Nom. Sizemm (min.)
160 x 110 x 50 mm
Dimension (mm)Anglea°
Anglea°
75 mm
No. 16 UPVC Female Elbow
ProductCode Color
Nom. Sizemm (min.)
1½” x 50 mm
Dimension (mm)Anglea°
No. 12 UPVC Door Tee
ProductCode Color
Nom. Sizemm (min.)
75 mm
Dimension (mm)Anglea°
Light Gray
Light Gray
Light Gray
Light Gray
Light Gray
Light Gray
22
Tel : +971 4 285 2864 - Fax : +971 4 285 8329 - P.O.Box : 5134, Dubai, U.A.E.info@jumaplastic.com - www.jumaplastic.com
A.A.Juma Plastic Pipes & Fitting Ind. Co. L.L.C.Our Brand Name