Post on 06-Feb-2018
Order by phone➤ 01342 826836 Order on-line➤ www.ecomcat.co.uk
Order by fax➤ 01342 826771 Website➤ www.jencons.co.uk
CentrifugesHettich
Take a look at our latest products on www.ecomcat.co.uk 199
193-111Mikro 120 MicrocentrifugeLow cost, compact microcentrifuge designed to process 12x1.5/2.2ml microtubes at high speeds. TheMikro 120 has exceptionally fast run up and braking rates, a pulse key and the ability to vary the speedand time of each run. A brush-less induction drive means both smooth and quiet operation. The Mikro120 is supplied with a 12 place angle rotor that includes a lid.
■ Microprocessor controlled with digital display■ Maintenance-free induction drive for smooth and quiet operation ■ Pulse key ■ Motor overheating protection ■ Imbalance switch-off
SpecificationMaximum capacity 12x1.5/2.2mlMaximum RPM 14,000Maximum RCF, x g 15,558Dimensions (hxwxd), mm 199x231x292Weight, kg 6
Cat. No. Description Price
193-111 Mikro 120 microcentrifuge, with rotor for 12x1.5/2.2ml tubes POA
Accessories
Cat. No. Description Price
193-544 Inserts for 0.5 - 0.8ml tubes (pack of 6) POA
193-545 Inserts for 0.2 - 0.4ml tubes (pack of 6) POA
193-891 Inserts for 1.5ml tubes (pack of 6)* POA
* This adaptor is not essential but can help protect some tubes from breakage at higher g forces
EBA 21 Bench CentrifugeLow cost, high-speed, small bench centrifuge capable of processing up to 6x50ml tubes. In addition tolarger volumes the unit will also handle up to 30x1.5/2.2ml microtubes. The centrifuge is fully micro-processor controlled with a brush-less motor and digital display. It can be operated by a timer or, forshort cycles, by using the pulse key.
■ Microprocessor controlled with digital display■ Maintenance-free induction drive for smooth and quiet operation
SpecificationMaximum capacity 6x50mlMaximum RPM 18,000Maximum RCF, x g 23,900Dimensions (hxwxd), mm 263x280x326Weight, kg 11.5
Cat. No. Description Price
194-092 EBA 21 Bench top centrifuge, without rotor POA
Accessories
Cat. No. Description Maximum RPM/RCF Capacity Price
194-093 Angle rotor with sealed lid 14,000/21,255 x g 30x1.5/2.2ml POA
194-096 Angle rotor with sealed lid 15,000/21,885 x g 24x1.5/2.2ml POA
193-544 Insert for 0.5–0.8ml tubes (pack of 6) POA
193-545 Insert for 0.2–0.4ml tubes (pack of 6) POA
193-892 Angle rotor 6,000/3,904 x g 6x50ml POA
193-895 Insert for 15ml Falcon POA
193-910 Insert for 50ml Oakridge POA
193-894 Insert for 50ml Falcon POA(only 3 tubes/rotor)
193-893 Angle rotor 6000/4,146 x g 12x15ml, POA6x15ml Falcons
New
194-092
Order by phone➤ 01342 826836 Order on-line➤ www.ecomcat.co.uk
Order by fax➤ 01342 826771 Website➤ www.jencons.co.ukHettich
Centrifuges
200 Take a look at our latest products on www.ecomcat.co.uk
193-113 Mikro 200/200R MicrocentrifugesCompact bench top microcentrifuges designed to process 0.2-2.2ml microtubes athigh speeds. With super fast run up and braking rates and capacities of up to 30tubes, overall processing times are greatly reduced. The Mikro 200 is supplied in bothair cooled and refrigerated versions and is equipped with an automatic locking systemguaranteeing secure lid closure every time.
With two angle rotors for 24x1.5/2.2ml and 30x0.5ml tubes, and a third designedspecifically to take PCR strips, the Mikro 200 will easily cover all high speed, smallvolume applications.
■ Microprocessor controlled with digital display■ Maintenance-free induction drive for smooth and quiet operation ■ Pulse key ■ Automatic lid locking ■ Fast Cool function (Mikro 200R)■ Autoclavable, aerosol tight rotor options
SpecificationModel Mikro 200 Mikro 200RMaximum capacity 24x2.2ml 24x2.2mlMaximum RPM 14,000 14,000Maximum RCF, x g 18,626 18,626Temperature range ———— -10°C to +40°CDimensions (hxwxd), mm 260x275x347 260x281x547Weight, kg 11.5 28
Cat. No. Description Price
193-113 Mikro 200 microcentrifuge, without rotor POA
193-114 Mikro 200R refrigerated microcentrifuge, without rotor POA
Accessories
Cat. No. Description Maximum Capacity PriceRPM/RCF
193-115 Angle rotor with lid 14,000/ 24x1.5/2.2ml POA18,626x g (0.2-2.2ml
with inserts)
193-544 Inserts for 0.5–0.8ml tubes –––– –––– POA(pack of 6)
193-545 Inserts for 0.2–0.4ml tubes –––– –––– POA(pack of 6)
193-891 Inserts for 1.5ml tubes –––– –––– POA(pack of 6)*
193-117 Angle rotor with lid 14,000/ 30x0.2-0.5ml POA17,749x g
193-119 Aerosol tight lid for –––– –––– POA193-115 and 193-117
193-118 Angle rotor** 14,000/ 4x 0.2ml POA12,490x g (PCR strip of 8)
or 32x0.2ml
* This adaptor is not essential but can help protect some tubes from breakage at higher g forces ** An optional lid is available for rotor 193-118, please contact our Technical Office on 01342 826836 for details.
New
193-114New
193-115New
193-119New
193-117New
Order by phone➤ 01342 826836 Order on-line➤ www.ecomcat.co.uk
Order by fax➤ 01342 826771 Website➤ www.jencons.co.uk
CentrifugesHettich
Take a look at our latest products on www.ecomcat.co.uk 201
SpecificationsModel Mikro 22 Mikro 22RMaximum capacity, ml 60x2.2 60x2.2Maximum speed, rpm 18,000 18,000Maximum RCF, x g 31,880 31,880Temperature range ———— -20°C to +40°CDimensions (hxwxd), mm 276x332x389 276x332x619Weight, kg 16 36
Cat. No. 193-537 193-538
Price POA POA
Please note: Mikro 22 & Mikro 22R are both supplied without rotors.
Accessories
Cat. No. Description Max RPM/Max RCF Capacity, ml Price
Mikro 22 & Mikro 22R model accessories
193-539 Angle rotor with lid 18,000/23,907 12x0.2–2.2 POA
193-540 Angle rotor with sealed lid 14,000/20,600 30x0.2–2.2 POA
193-890 Angle rotor with sealed lid 14,000/21,255 48x0.2–2.2 POA
194-075 Angle rotor with sealed lid 18,000/31,514 24x1.5ml POA
193-543 Swing out (high speed) rotor 13,000/18,516 24x0.2–2.2 POA
193-544 Inserts for 0.5–0.8ml tubes — — POA(pack of 6)
193-545 Inserts for 0.2–0.4ml tubes — — POA(pack of 6)
193-546 Drum rotor 13,000/14,150 (see inserts) POA
193-547 Insert block (6 per rotor) — 60x1.5–2.2 POA
193-548 Insert block (6 per rotor) — 192x0.2–0.4 POA
193-549 Insert block (6 per rotor) — 126x0.5–0.8 POA
Mikro 22R Refrigerated model accessories only
193-551 Angle rotor 6,000/3,904 6x50 POA
193-895 Insert for 15ml Falcon — — POA
193-910 Insert for 50ml Oakridge — — POA
193-894 Insert for 50ml Falcon, 3 per rotor — — POA
193-550 Angle rotor 6,000/4,025 12x15 POA
193-890
193-551
193-546
Mikro 22 and Mikro 22RMicro-centrifugesSmall benchtop micro-centrifuges designed toprocess 0.2–2.2ml microtubes at high speeds.With super-fast run-up and braking rates andcapacities of up to 60 tubes, overall processingtimes are greatly reduced. The refrigerated versionhas the additional advantage of being able tohandle larger tubes of up to 50ml capacity.
Both models feature the unique Hettich lidlocking mechanisms. With this system, the lidcan be securely closed and locked in seconds,with the minimum of effort.
■ Unique, easy-lock, lid closing mechanism■ Fully digital and microprocessor controlled■ Maintenance-free induction drive for
smooth and quiet operation■ Impulse key■ Able to maintain 4ºC even at maximum
speed (refrigerated version)■ CE marked
193-537 193-538 Rotor sold separately
Order by phone➤ 01342 826836 Order on-line➤ www.ecomcat.co.uk
Order by fax➤ 01342 826771 Website➤ www.jencons.co.ukHettich
Centrifuges
202 Take a look at our latest products on www.ecomcat.co.uk
Rotofix 32 CentrifugeLow cost, medium sized, bench top centrifuge designed to handle all common laboratory tubes andapplications up to 100ml capacity, as well as accessories for performing cyto centrifugation (cytoaccessories on request). The Rotofix 32 is fully microprocessor controlled and has a digital display. Themotor is a brush-less induction drive unit for smooth and quiet operation.
SpecificationsMaximum capacity, ml 4x100Maximum speed, rpm 6,000Maximum RCF, x g 4,629Dimensions (hxwxd), mm 261x368x437Weight, kg 15.5
Cat. No. Description Price
194-079 Rotofix 32 bench top centrifuge, without rotor POA
Accessories
Cat. No. Description Max RPM/RCF Capacity, ml Price
193-558 Swing out rotor 4,000/2,647 12x0.2–2.2 POA
193-559 Metal bucket ———— ———— POA
193-560 Sealing lid ———— ———— POA
194-007 Adaptor for 5x7ml blood tubes (12mm diameter) ———— ———— POA
193-562 Adaptor for 1x25ml Universal tube ———— ———— POA
193-563 Adaptor for 1x50ml Falcon tube ———— ———— POA
193-564 Adaptor for 1x15ml Falcon tube ———— ———— POA
193-566 Swing out rotor* 5,000/3,857 8x50ml Falcons POA
193-897 Swing out rotor 4,000/2,683 6x50ml Falcons POA
193-565 Adaptor for 15ml Falcon tube ———— ———— POA
Adaptors for other tube sizes available on request. Please contact our Technical Office on 01342 826836.
* Swing out angle is 45°
Haematocrit 210 CentrifugeThe Haematocrit 210 centrifuge is capable of handling up to 24 x capillary tubes for quick and easyhaematocrit determination. The unit is fully microprocessor controlled and features a digital display. Itcomes equipped with an automatic lid-locking system for guaranteed and secure closure. Aftercompletion of the run, simply pressing the appropriate key will release the lock and open the lid.The 193-912 rotor (not supplied) is segmented with 24 individual chambers, so that if one capillary tubebreaks or leaks it will not affect the others.
SpecificationMaximum capacity 24/20 capillary tubesMaximum RPM 13,000Maximum RCF 16,060Dimensions (hxwxd), mm 247x275x330Electrical requirements 208-240V, 50/60HzWeight, kg 10
Cat. No. Description Price
194-090 Haematocrit 210 centrifuge, without rotor POA
Accessories
Cat. No. Description Max RPM/RCF Capacity Price
193-912 Haematocrit rotor with lid* 13,000/16,060 24x capillaries POA
* The lid of the rotor is also an evaluation disc. A rotor for 20 capillaries and sealing putty are also available. Pleasecontact our Technical Office on 01342 826836 for details.
■ Fully digital and microprocessor controlled■ Imbalance detection system ■ Automaic lid-locking
■ Motor overheating protection ■ CE marked
■ Fully digital and microprocessor controlled■ Maintenance-free induction drive for
smooth and quiet operation■ Large variety of rotor options with
overspeed protection
■ Imbalance detection system■ Metal casing with impact-resistant coating■ CE marked
194-079
Rotor and adaptors sold separately
194-090 Rotor sold separatelyNew
Order by phone➤ 01342 826836 Order on-line➤ www.ecomcat.co.uk
Order by fax➤ 01342 826771 Website➤ www.jencons.co.uk
CentrifugesHettich
Take a look at our latest products on www.ecomcat.co.uk 203
SpecificationsModel Universal 320 Universal 320RMaximum capacity, ml 4x100 4x100Maximum speed, rpm 15,000 15,000Maximum RCF, x g 21,382 21,382Temperature range ———— -20 to +40°CDimensions (hxwxd), mm 346x395x520 346x401x695Weight, kg 29 52
Cat. No. 194-176 194-177
Price POA POA
Accessories
Cat. No. Description Max RPM/RCF Capacity, ml Price
193-554 Angle rotor 15,000/16,602 12x0.4–2.0 POA
193-556 Angle rotor* 14,000/21,255 30x0.4–2.0 POA
193-544 Adaptor for 0.5–0.8ml tubes (pack of 6) — — POA
193-545 Adaptor for 0.2–0.4ml tubes (pack of 6) — — POA
193-557 Angle rotor 9,000/9,418 6x85 POA
193-957 Adaptor for 15ml Falcon — — POA
194-107 Adaptor for 50ml Falcon (only 3 tubes/rotor) — — POA
194-095 Conversion kit to allow 6x50ml — — POAFalcon tubes in rotor 193-557
193-558 Swing out rotor 4,000/2,665 — POA
193-559 Metal bucket — — POA
193-560 Sealing lid — — POA
194-007 Adaptor for 5x7ml blood tubes (12mm diameter) — — POA
193-562 Adaptor for 1x25ml Universal — — POA
193-563 Adaptor for 1x50ml Falcon tube — — POA
193-564 Adaptor for 1x15ml Falcon tube — — POA
Inserts for other tube sizes available on request
193-566 Swing out rotor** 5,000/3,857 8x50ml Falcons POA
193-897 Swing out rotor 4,000/2,701 6x50ml Falcons POA
193-565 Adaptor for 15ml Falcon tube — — POA
193-904 Microtitre rotor with carriers 4,000/2,093 4x microtitre plate POA
* For Universal 320R model only ** Swing out angle is 45°
Other rotors are available, please contact our Technical Office on 01342 826836 for details.
194-177 194-176Rotor sold separately for both centrifuges
193-904
193-566
Universal 320 and 320RCentrifugesMedium bench top centrifuges designed to handle allcommon laboratory tubes. In the low speed range, theUniversal 320 and 320R can process standard tubes up toa volume of 100ml, microtitre plates, conical tubes withscrew cap, blood collection tubes and cyto accessories.Microlitre tubes can be accelerated to an RCF of 21,382.
The refrigerated version (320R) has a temperature rangeof -20 to +40°C and features a ‘Fast Cool’ function. Thecooling unit is located at the rear of the centrifuge tosave valuable lateral bench space.
■ Fully digital and microprocessor controlled ■ Maintenance-free brushless drive for smooth and
quiet operation ■ Automatic electronic lid locking with emergency
lid-lock release ■ 10 program memory ■ Large variety of easily interchangeable rotors with
rotor recognition and overspeed protection ■ Imbalance detection and switch off system ■ Chamber (320R only) and motor overheating
protection ■ Metal casing and stainless steel chamber
New
Order by phone➤ 01342 826836 Order on-line➤ www.ecomcat.co.uk
Order by fax➤ 01342 826771 Website➤ www.jencons.co.ukHettich
Centrifuges
204 Take a look at our latest products on www.ecomcat.co.uk
194-123
194-124 shown with optional ‘S’ control panel
Rotanta 460 and Rotanta 460R CentrifugesLarge bench top centrifuges designed to process all common laboratory tubes andapplications up to 750ml capacity. One rotor will handle all the available bucketoptions including those designed for ASTM oil test tubes and smaller blood bagsystems. This versatile centrifuge is equipped with an automatic lid locking mechanismfor safe and easy closure and is exceptionally quiet and smooth, even at full speed.Fully programmable, heated and robotics versions are also available.
■ Fully digital and microprocessor controlled ■ Maintenance-free induction drive for smooth and quiet operation ■ Automatic electronic lid locking ■ One rotor with multiple bucket options ■ High speed rotors up to 24,400g ■ Hygienically sealed microtitre plate buckets
SpecificationsModel Rotanta 460 Rotanta 460RMax. capacity, ml 4x750 4x750Max. speed, rpm 15,000 15,000Max. RCF, x g 24,400 24,400Temperature range ———— -20°C to +40°CDimensions (hxwxd), mm 453x554x707 453x770x707Weight, kg 89.5 125
Cat. No. Description Price
194-123 Rotanta 460 Bench top centrifuge, without rotor POA
194-124 Rotanta 460R Refrigerated bench top centrifuge, without rotor POA
Accessories
Cat. No. Description Max RPM/RCF Capacity Priceml
194-580 Swing out rotor 4600/4637 4x750 POA
194-581 Metal bucket (round), 750ml ———— ———— POA
194-582 Sealing lid ———— ———— POA
194-583 Insert for 19x15ml tubes ———— ———— POA
194-584 Insert for 7x25ml Universals ———— ———— POA
194-585 Insert for 5x50ml Falcon tubes ———— ———— POA
194-586 Insert for 14x15ml Falcon tubes ———— ———— POA
194-587 Metal bucket (rectangular) ———— ———— POA
194-588 Sealing lid ———— ———— POA
194-589 Insert for 5x50ml Falcon tubes ———— ———— POA
194-590 Insert for 12x15ml Falcon tubes ———— ———— POA
194-591 Microtitre bucket ———— ———— POA
194-592 Sealing lid ———— ———— POA
194-593 Insert for microtitre plate ———— 4x microtitre/ POAbucket
194-120 Angle rotor 11,500/18,038 6x94 POA
194-121 Angle rotor 8,500/11,228 6x250 POA
194-122 Angle rotor 15,000/24,400 30x1.5 POA
193-544 Insert for 0.5ml microtube (pk of 6) ———— ———— POA
193-545 Insert for 0.4ml microtube (pk of 6) ———— ———— POA
Cabinets
Cat. No. Description Price
194-172 Cabinet with one drawer and castors for Rotanta 460 POA
194-173 Cabinet with two drawers and castors for Rotanta 460 POA
194-174 Cabinet with one drawer and castors for Rotanta 460R POA
194-175 Cabinet with two drawers and castors for Rotanta 460R POA
Inserts available for other tube sizes on request. Please contact our Technical Office on 01342 826836. Accessories also available for applications with Qiagen plates, Schlenk tubesand blood bags, please enquire for details.
Models with ‘S’ control panel (can store up to 89 programmes and features many additionalfunctions) are also available, please contact our Technical Office on 01342 826836 for details.
Order by phone➤ 01342 826836 Order on-line➤ www.ecomcat.co.uk
Order by fax➤ 01342 826771 Website➤ www.jencons.co.uk
CentrifugesThermo Electron
Take a look at our latest products on www.ecomcat.co.uk 205
ALC, 4204 and 4214 Microcentrifuges
4204 Fixed SpeedThe ideal microcentrifuge for repetitive routine runs at 12,000rpm (13,030 x g). A 15 minute timer withpre-selector ensures absolute repeatability of the parameters.
4214 Variable SpeedThe most complete and powerful microcentrifuge in the ALC range. The maximum speed of 14,000rpmgives an outstanding 17,746 x g.
Both microcentrifuges are supplied without rotors. They use the minimum of bench space and have avariety of safety devices protecting the user, including an armoured bowl, lid interlock, metallic casingand counterbalanced lid. The A12 rotor is supplied with a specially-designed transparent cap, whichoptimises the air circulation and ensures maximum quietness and minimum temperature increase.
SpecificationsModel 4204 4214Maximum capacity, ml 20x1.5 20x1.5Speed range, rpm 12,000 1,000 to 14,000Maximum RCF, x g 13,030 17,746 Speed display ———— 5 digit LCDTimer, mins 1–15 + hold 1–15 + holdPulse facility No YesMaximum temperature rise, ºC Ambient +12 Ambient +12Maximum noise, dB(A) 58 61Power, W 300 330Dimensions (hxwxd), mm 220x240x360 220x240x360Weight, kg 10 10
Cat. No. 193-607 193-608
Price POA POA
Interchangeable Rotors and Adaptors for 4204 and 4214 MicrocentrifugesCat. No. Description Price Cat. No. Description Price
193-614 A12 Rotor 20x1.5/2ml POA 193-626 Adaptors (20) 1x0.5ml (dia. 6mm) POA
193-615 A13 Rotor 6x1.5/2ml* POA 193-629 Adapters (20) 0.2ml PCR POA
193-627 Adaptors (20) 1x0.5ml (dia. 8mm) POA
*Without sealing cap Please note: 4204/4214 are supplied without rotor.
ALC, 4206 Mini Centrifuge
Indispensable in small centres, emergency laboratories, mobile units, teaching laboratories, the 4206 iseasily transportable and is particularly suited to medical or veterinary use. The new hermetically-sealedsingle buckets ensure biological safety during centrifugation. The transparent cap allows easy visualinspection of the centrifuge tubes.
SpecificationMaximum capacity, ml 4x30 Maximum noise, dB(A) 64Maximum RCF, x g 3,461 Power, W 130Speed range, rpm 200–6,000 Dimensions (hxwxd), mm 320x270x320Timer, mins 1–15 + hold Weight, kg 9.6
Cat. No. Description Price
193-609 4206 Mini centrifuge without rotor POA
RotorsCat. No. Description Capacity, ml Max. Speed, rpm Max. RCF, xg Price
193-610 F-9 Fixed angle rotor 6x15 6,000 3,461 POA
193-611 F-10 Fixed angle rotor 4x15 Sealed 6,000 3,461 POA
193-612 F-11 Fixed angle rotor 4x30 6,000 3,380 POA
■ Extremely quiet and compact■ Highly reliable and safe■ Economical price■ Variable speed (max 6,000rpm)
■ 15 minute timer with pre-selector■ Sealed rotor 4x15ml■ Maximum capacity 6x15ml■ Fully portable
■ High ‘g’ force (17,746 max) (4214)■ 15 minute timer with pre-selector■ Single speed (12,000rpm) model (4204)■ Variable speed model (4214)
■ Digital display (4214)■ Pulse button (4214)■ Fully portable
193-607 shown with 193-614
193-608
193-609shown with 193-610
Order by phone➤ 01342 826836 Order on-line➤ www.ecomcat.co.uk
Order by fax➤ 01342 826771 Website➤ www.jencons.co.uk
Centrifuges
206 Take a look at our latest products on www.ecomcat.co.uk
193-863
193-865
193-866
193-869
Thermo Electron, ALC, 4218 Mini Centrifuge
EconomicalThe 4218 mini centrifuge offers outstanding performance, large capacity and variable speed at aneconomical price.
PortableWeighing only 12.5kg and with compact dimensions (370x350x420mm), the 4218 is ideal for use insmall laboratories and for occasional use in the field.
RotorsThe 4218 can spin a variety of tubes up to a maximum size of 85ml in angle or swing-out rotors. Thismakes it ideal for small healthcare and veterinary laboratories, emergency laboratories, mobile units orday surgery units. The 4218 requires a rotor for operation, details of which are listed below.
SpecificationModel 4218Maximum capacity, ml 6x85Speed range, rpm 4,800Maximum RCF, x g 2,086 Timer, mins 0–30 + holdPulse facility NoMaximum noise, dB(A) 61Power, W 140Dimensions (hxwxd), mm 370x350x420Weight, kg 12.5
Cat. No. Description Price
193-863 4218 Mini centrifuge without rotor POA
Rotors for ALC 4218 Mini centrifuge
Cat. No. Description Capacity, ml Max. Speed, rpm Max. RCF, xg Price
193-864 0-3/1 Swing out rotor set 4x85 3,550 1,817 POA
193-865 0-3/3 Swing out rotor set 16x15 3,300 1,558 POA
193-866 0-5 Swing out rotor set 6x15 3,700 1,836 POA
193-868 F-1 Fixed angle rotor 6x85 3,750 1,855 POA
193-869 F-3 Fixed angle rotor 24x15 3,400 1,680 POA
193-870 F-4 Fixed angle rotor 12x15 3,700 1,760 POA
193-613 A-10 Angle rotor 60x0.5 4,800 2,086 POA
193-614 A-12 Angle rotor 20x2 4,800 2,009 POA
Rotor sets include buckets.
For full details on rotor/tube combinations please contact our Technical Office on 01342 826836.
Cencom, Mini CentrifugeThe Cencom features a built-in rotor for 6x15ml tubes, a timer (0-30mins) and a safety micro-switch inthe lid that cuts power when the lid is opened. The outer casing is epoxy coated metal and a transparentlid enables the user to see when the rotor has stopped spinning. Speed is adjustable, with 8 pre-setpositions. The Cencom has a small footprint and is easily transportable.
SpecificationMaximum capacity, ml 6x15Maximum speed, rpm 3,600Maximum RCF, x g 1,450Speed range, rpm 630–3,600 with 8 set positionsTimer, mins 0–30Power, W 92Dimensions (hxdiameter), mm 250x240Weight, kg 5
Cat. No. Description Price
194-650 Cencon Mini centrifuge supplied with built-in 6x15ml rotor and 6x15ml POAglass centrifuge tubes
■ Extremely quiet and compact■ Choice of rotors ■ Highly reliable■ Maximum capacity 6x85ml
■ Economical price■ Multiple safety features■ Variable speed (max 4,800rpm)
194-650New
Order by phone➤ 01342 826836 Order on-line➤ www.ecomcat.co.uk
Order by fax➤ 01342 826771 Website➤ www.jencons.co.uk
CentrifugesThermo Electron
Take a look at our latest products on www.ecomcat.co.uk 207
ALC, PK110 CentrifugeThe PK110 is a general purpose centrifuge, ideal for small andmedium laboratories. The microprocessor control system has a userfriendly interface with soft touch keys for regulation of speed andtime. Fast or soft acceleration and deceleration can be selected.
The PK110 sealed swing out rotor set can spin blood tubes andtissue culture tubes up to 4,000rpm. Other accessories such as a6x50ml conical rotor, 24x15ml fixed angle rotor, 20x1.5ml anglerotor and cytobuckets are available for the PK110 providingmaximum versatility.
Safety Biological safety of tubes is assured by sealed accessories certifiedby CAMR (Porton Down). An automatic speed limitation device isalso standard on the PK110 centrifuge.
SpecificationModel PK110Maximum speed
Angle, rpm 6,300Swing out, rpm 4,000
Maximum RCFAngle, x g 3,661Swing out, x g 2,647
Maximum capacityAngle, ml 6x50 conicalSwing out, ml 4x135
Maximum noise, dB(A) (max.) 57Maximum power, W 150Dimensions (hxwxd), mm 280x370x460Weight, kg 28
Cat. No. Description Price
194-032 PK110 Centrifuge without rotor POA
■ Microprocessor control ■ High performance ■ Compact size ■ Brushless induction motor
■ Multiple rotors ■ Quiet (max 57dB(A))
194-032 shown with rotor 194-529
194-531
194-530
194-532
194-534194-039
194-033with 194-034
194-032
Rotors for ALC PK110 Centrifuge
Swing Out Rotors
Cat. No. Description Dimensions, mm Capacity, ml Max Speed, rpm Max RCF, x g Price
194-033 O-G26/1 Rotor set (1x rotor + 4x buckets) 43x112 4x135 4,000 2,647 POA
194-034 C513 Sealing caps for O-G26/1 rotor. Set of 4 POA
194-529 O-G26/2 Rotor 17x100 16x15 4,000 2,575 POA
194-530 O-G26/3 Rotor including sealing caps 17x100 8x15 4,000 2,575 POA
194-531 O-G26/4 Rotor 17x100 8x15 4,000 2,575 POA
Angle Rotors
Cat. No. Description Dimensions, mm Capacity, ml Max Speed, rpm Max RCF, x g Price
194-039 F-G1 Angle rotor 28x115 6x50 5,000 3,661 POA
194-532 F-G3 Angle rotor 17x100 24x15 4,000 2,379 POA
194-534 A-G12 Angle rotor 10x41 20x1.5/2 6,300 3,461 POA
For adaptors for all PK110 rotors see page 214.
Order by phone➤ 01342 826836 Order on-line➤ www.ecomcat.co.uk
Order by fax➤ 01342 826771 Website➤ www.jencons.co.ukThermo Electron
Centrifuges
208 Take a look at our latest products on www.ecomcat.co.uk
ALC, PK120 and PK120RUniversal Centrifuges■ ‘ANNITA’ Microprocessor-control■ High performance■ Compact size■ 5 programme memory■ Brushless induction motor■ Choice of 5 rotors■ Quiet (<62/ <59 dB(A))
The PK120 Universal series is a new generationof technically-advanced, stylish and compactlow-speed centrifuges. Designed for routine andresearch applications, it is the ideal workhorse forthe busy laboratory.
With a maximum capacity of 4x190ml, adaptorscan be used to spin loads comprising, forexample, 4x50ml or 12x15ml conicals, 20x10mlblood tubes, 48x3ml RIA tubes or up to 6microplates in sealed carriers, thus showing thatthe PK120 series offers maximum versatility.
SafetyBiological safety of tubes and microplates isassured by sealed accessories certified by CAMR(Porton Down) standard IEC 1010-2-020.
Cool Working System (CWS)The PK120 features CWS to ensure maximumperformance with the minimum increase insample temperature. The PK120R features apowerful ‘CFC free’ refrigeration system over therange -10ºC to 40ºC.
SpecificationsModel PK120 PK120RMaximum speed
Angle, rpm 6,000 6,000Swing out, rpm 4,000 4,000
Maximum RCFAngle, x g 4,507 4,507 Swing out, x g 2,879 2,879
Maximum capacityAngle, ml 6x50 6x50Swing out, ml 4x190 4x190
Temperature range, ºC Ambient -10 to 40Maximum noise, dB(A) <62 <59Maximum power, W 480 790Dimensions
(hxwxd), mm 375x400 380x575x480 x595
Weight, kg 40 72
Cat. No. Description Price
193-617 PK120 Universal POAcentrifuge without rotor
193-618 PK120R Universal POArefrigerated centrifuge without rotor
For details of rotors for the PK120 and PK120R seriescentrifuges, please see page 210. For information onadaptors, please see pages 215 to 216.
193-617 193-618
Order by phone➤ 01342 826836 Order on-line➤ www.ecomcat.co.uk
Order by fax➤ 01342 826771 Website➤ www.jencons.co.uk
CentrifugesThermo Electron
Take a look at our latest products on www.ecomcat.co.uk 209
193-620
ALC PK121 and PK121RMultispeed Centrifuges■ Multi-function■ ’ANNITA’ Microprocessor control■ Brushless induction motor■ KLRS (Keyless Rotor System)■ Cool working system (CWS)■ Multiple rotors■ Multi-speed ranges
The PK121 series are technically advancedmultispeed centrifuges, designed for all require-ments in the molecular biology and healthcarefields. They are ideal for high and low speedapplications, from microvolumes to largecapacities, for research and routine analysis.
SimplicityIntuitive user interface with ultrafast programming.5 programmable memories with lock protectionand 5 acceleration/ deceleration profiles make thePK121 series extremely versatile.
KLRS (Keyless Rotor System)An exclusive patented, automatic rotor-lockingmechanism allows a rapid exchange of rotors inunder 5 seconds.
Cool Working System (CWS)The PK121 features CWS to ensure that anysample temperature rise is kept to a minimum,whilst the PK121R features a powerful andprecise refrigeration system through the range-10ºC to 40ºC.
SafetyBiological safety of tubes and microplates isassured by sealed accessories certified by CAMR(Porton Down) standard IEC 1010-2-020.
Multiple RotorsSwing out, fixed angle and high-speed anglerotors can all be run in the PK121 series up to amaximum speed of 14,000rpm (18,403 x g). Achoice of 8 rotors meets every requirement andoffers optimum versatility.
For details of rotors for the PK121 seriescentrifuges, please see page 210.
SpecificationsModel PK121 PK121RMaximum speed
Angle, rpm 14,000 14,000Swing out, rpm 4,000 4,100
Maximum RCFAngle, x g 18,403 18,403Swing out, x g 2,879 3,025
Maximum capacityAngle, ml 6x50 6x50Swing out, ml 4x190 4x190
Temperature range, ºC Ambient -10 to 40Maximum noise, dB(A) <62 <59Maximum power, W 480 790Dimensions
(hxwxd), mm 375x400 380x575x480 x595
Weight, kg 40 72
Cat. No. Description Price
193-619 PK121 Multispeed POAcentrifuge without rotor
193-620 PK121R Multispeed POAcentrifuge refrigeratedwithout rotor
For details of rotors for the PK121 series centrifuges,please see page 210. For information on adaptors,please see pages 215 to 216.
193-619
Order by phone➤ 01342 826836 Order on-line➤ www.ecomcat.co.uk
Order by fax➤ 01342 826771 Website➤ www.jencons.co.ukThermo Electron
Centrifuges
210 Take a look at our latest products on www.ecomcat.co.uk
Swing Out Rotors for PK120 Series and PK121 Series
Cat. No. Description Dimensions Capacity Max Speed Max RCF Pricemm ml rpm x g
193-633 O-E24 Rotor set for PK120 56x116 4x190 4,000 2,879 POA(1x rotor +4 x buckets)
193-634 O-M24 Rotor set for PK121 56x116 4x190 4,000 2,879 POA(1x rotor +4 x buckets)
193-635 C506 Sealing caps for O-E24 and O-M24 rotors. Set of 4 POA
Adaptors for swingout rotors are detailed on page 215.
Angle Rotors for PK120 Series and PK121 Series
Cat. No. Description Capacity Max Speed Max RCF Priceml rpm x g
193-736 F-E6 Angle rotor for PK120 30x15 4,000 2,414 POA
193-711 F-M6 Angle rotor for PK121 30x15 4,000 2,414 POA
193-706 A-E10 Angle rotor for PK120 6x50 conical 6,000 4,507 POA
193-728 A-M10 Angle rotor for PK121 6x50 conical 10,000 12,519 POA
193-708 A-E12 Angle rotor for PK120 20x2.0/1.5 6,000 3,122 POA
193-729 A-M12 Angle rotor for PK121 20x2.0/1.5 14,000 17,089 POA
Adaptors for these rotors are detailed on 216.
Microplate Rotors for PK120 Series and PK121 Series
Cat. No. Description Microplate Max Speed Max RCF PriceCapacity rpm x g
193-737 O-E17/1 Microplate rotor for 2x3 3,000 1,157 POAPK120 - including buckets
193-740 O-M17/1 Microplate rotor for 2x3 3,000 1,157 POAPK121- including buckets
193-738 Sealed carrier (1) for O-E17/1 rotor POA
193-704 Sealed carrier (1) for O-M17/1 rotor POA
Drum Rotor for PK121 Series
Cat. No. Description Capacity, ml Max Speed, rpm Max RCF, x g Price
193-727 A-M6, 6 Place drum rotor - 60x2 11,000 9,738 POAwith lid for PK121
Racks for these rotors are detailed on page 216.
Angle Rotors for PK121 Series
Cat. No. Description Capacity, ml Max Speed, rpm Max RCF, x g Price
193-730 A-M13 Angle rotor for PK121 10x10 12,000 13,682 POA
193-724 C509 Spare sealing cap (1) for A-M13 rotor POA
193-731 A-M21 Angle rotor for PK121 24x2.0/1.5 14,000 18,403 POA
193-725 C512 Spare sealing cap (1) for A-M21 rotor POA
Adaptors for these rotors are detailed on page 216.
Please note that all the rotors listed fit both the standard and refrigerated models in each series.
193-634
193-635
193-736
193-737
193-704
193-708
193-706
Order by phone➤ 01342 826836 Order on-line➤ www.ecomcat.co.uk
Order by fax➤ 01342 826771 Website➤ www.jencons.co.uk
CentrifugesThermo Electron
Take a look at our latest products on www.ecomcat.co.uk 211
ALC, PK130 and PK130R Universal Centrifuges■ ‘ANNITA’ Microprocessor control■ High performance■ Compact size■ 5 programme memory■ Brushless induction motor■ 6 rotors■ Quiet (<62/<59dB(A))
The PK130 Universal series is a range oftechnically advanced, stylish and compact low-speed centrifuges, designed for routine andresearch applications.
With a maximum capacity of 4x280ml, adaptorscan be used to spin loads comprising, forexample, 8x50ml or 16x15ml conicals, 48x10mlblood tubes, 76x5ml RIA tubes, or up to 6microplates in sealed carriers; thus showing thatthe PK130 series offers maximum versatility.
The soft-touch keypad is designed for fastprogramming of parameters (speed, time,temperature) as well as offering 5 acceleration/deceleration profiles.
SafetyBiological safety of tubes and microplates isassured by sealed accessories certified by CAMR(Porton Down) standard IEC 1010-2-020.
Cool Working System (CWS)The PK130 features CWS to ensure maximumperformance with minimum increase in sampletemperature. The PK130R features a powerfulCFC free refrigeration system over the range -10ºC to 40ºC.
SpecificationsModel PK130 PK130RMaximum speed
Angle, rpm 6,500 6,500Swing out, rpm 4,000 4,000
Maximum RCFAngle, x g 5,289 5,289Swing out, x g 2,933 2,933
Maximum capacityAngle, ml 6x94 6x94Swing out, ml 4x280 4x280
Temperature range, ºC Ambient -10 to 40Maximum noise, dB(A) <62 <59Maximum power, W 480 790Dimensions 375x400 380x575
(hxwxd), mm x480 x595Weight, kg 40 72
Cat. No. Description Price
193-621 PK130 Universal POAcentrifuge without rotor
193-622 PK130R Universal POArefrigerated centrifugewithout rotor
For details of the rotors available for the PK130 andPK130R, please see page 213.
For information on adaptors, please see pages 215and 216.
193-621 193-622
Order by phone➤ 01342 826836 Order on-line➤ www.ecomcat.co.uk
Order by fax➤ 01342 826771 Website➤ www.jencons.co.ukThermo Electron
Centrifuges
212 Take a look at our latest products on www.ecomcat.co.uk
193-623 193-624
ALC, PK131 and PK131R Multispeed Centrifuges■ Multi function■ ’ANNITA’ Microprocessor control■ Brushless Induction motor■ Multiple speed ranges■ Keyless Rotor System (KLRS) ■ Cool Working System (CWS)■ Multiple rotors
The PK131 series are technically advancedmultispeed centrifuges designed for applicationsin the molecular biology and healthcare fields.They are ideal for high and low speed applica-tions, from microvolumes to large capacities, forresearch and routine analysis.
The PK131 and PK131R both feature an intuitiveuser interface with ultra-fast programming, 5programmable memories with lock protectionand 5 acceleration/ deceleration profiles makingthe PK131 series extremely versatile.
Keyless Rotor System (KLRS)An exclusive, patented, automatic rotor-lockingmechanism allows a rapid exchange of rotors inunder 5 seconds.
Cool Working System (CWS)The PK131 features CWS to ensure sampletemperature rise is kept to a minimum, whilst thePK131R features a powerful and precise refriger-ation system over the range -10ºC to 40ºC.
SafetyBiological safety of tubes and microplates isassured by sealed accessories certified by CAMR(Porton Down) Std IEC 1010-2-020.
Multiple RotorsSwing out, fixed angle and high speed anglerotors can all be run in the PK131 series up to amaximum speed of 14,000rpm (18,403xg). Atotal of 8 rotors meets every requirement andoffers optimum versatility. For details of therotors for the PK131 and PK131R, see page 213and for adaptors, see pages 215 to 216.
SpecificationsModel PK131 PK131RMaximum speed
Angle, rpm 14,000 14,000Swing out, rpm 4,000 4,100
Maximum RCFAngle, x g 18,403 18,403Swing out, x g 2,933 3,082
Maximum capacityAngle, ml 6x94 6x94Swing out, ml 4x280 4x280
Temperature range, ºC Ambient -10 to 40Maximum noise, dB(A) <63 <60Maximum power, W 520 790Dimensions
(hxwxd), mm 375x400 380x575x480 x595
Weight, kg 40 72
Cat. No. Description Price
193-623 PK131 Multispeed POACentrifuge without rotor
193-624 PK131R Multispeed POArefrigerated Centrifugewithout rotor
For details of the rotors available for the PK131 andPK131R, please see page 213.
Order by phone➤ 01342 826836 Order on-line➤ www.ecomcat.co.uk
Order by fax➤ 01342 826771 Website➤ www.jencons.co.uk
CentrifugesThermo Electron
Take a look at our latest products on www.ecomcat.co.uk 213
Swing Out Rotors for PK130 Series and PK131 SeriesCat. No. Description Dimensions Capacity Max Speed Max RCF Price
mm ml rpm x g
193-739 O-F25 Rotor set for PK130 64x109 4x280 4,000 2,933 POA(1 x rotor + 4 x buckets)
193-714 O-V25 Rotor set for PK131 64x109 4x280 4,100 3,082 POA(1 x rotor + 4 x buckets)
193-723 C507 Sealing caps for O-F25 and O-V25. Set of 4 ———— ———— POA
Adaptors for these rotors are detailed on page 215.
Angle Rotors for PK130 Series and PK131 SeriesCat. No. Description Capacity, ml Max Speed, rpm Max RCF, x g Price
193-726 A-F12 Angle rotor for 20x2.0/1.5 6,500 3,684 POAPK130, including lid
193-734 A-V12 Angle rotor for PK131 20x2.0/1.5 14,000 17,089 POA
193-712 F-F6 Angle rotor for PK130 30x15 4,000 2,414 POA
193-713 F-V6 Angle rotor for PK131 30x15 4,000 2,537 POA
Adaptors for these rotors are detailed on page 216.
Drum Rotor and racks for PK131 SeriesCat. No. Description Capacity, ml Max Speed, rpm Max RCF, x g Price
193-732 A-V6, 6 Place drum 60x2.0/1.5 11,000 9,738 POArotor for PK131
Racks for this rotor are detailed on page 216.
Angle Rotor for PK131 SeriesCat. No. Description Capacity, ml Max Speed, rpm Max RCF, x g Price
193-710 A-V18 Angle rotor for PK131 6x94 10,000 11,066 POA
193-735 A-V13 Angle rotor for PK131 10x10ml 12,000 13,682 POA
193-625 C-510 Spare sealing cap (1) A-V13 rotor POA
193-814 A-V21 Angle rotor for PK131 24x2/1.5ml 14,000 18,403 POA
193-725 C-511 Spare sealing cap (1) A-V21 rotor POA
Microplate Rotors for PK130 Series and PK131 SeriesCat. No. Description Capacity, ml Max Speed, rpm Max RCF, x g Price
193-815 O-F17/1 Microplate rotor 2x3 microplates 3,000 1,157 POA+ buckets for PK130
193-816 Sealed carrier (1) for O-F17/1 rotor POA
193-817 O-V17/1 Microplate + buckets 2x3 microplates 3,000 1,157 POArotor for PK131
193-818 Sealed carrier (1) for O-V17/1 rotor POA
Angle Rotors for PK130 Series and PK131 SeriesCat. No. Description Capacity Max Speed, rpm Max RCF, x g Price
193-709 A-F10 Angle rotor for PK130 6x50 Conical 6,500 5,289 POA
193-733 A-V10 Angle rotor for PK131 6x50 Conical 10,000 12,519 POA
Adaptors for these rotors are detailed on page 216.
Please note that all rotors listed fit both the standard and refrigerated models in each series. 193-710
193-712
193-714
193-723
193-817
193-814
Order by phone➤ 01342 826836 Order on-line➤ www.ecomcat.co.uk
Order by fax➤ 01342 826771 Website➤ www.jencons.co.ukThermo Electron
Centrifuges
214 Take a look at our latest products on www.ecomcat.co.uk
Adaptors for O-G26/1 Swing Out Rotor for PK110 Centrifuge
Cat. No. Capacity/tubes Dimensions, mm Pack Price
194-510 1x110ml/100ml 40x113 4 POA
194-511 1x100ml 44x100 4 POA
194-512 1x94ml/85/80ml 38x101 4 POA
194-513 1x65/50ml 34x100 4 POA
194-215 1x50ml 28.5x105 4 POA
194-514 1x50ml conical skirted 28x115 4 POA
194-049 1x50ml conical 28x116 4 POA
194-515 1x38.5ml 25.6x88.5 4 POA
194-516 1x30/25ml 24x95 4 POA
194-517 1x30ml 23.5x105 4 POA
194-518 1x25ml Plastic Univ 28x85 4 POA
194-519 1x25ml 24x100 4 POA
194-520 3x16/15ml 18x100 4 POA
194-521 1x15ml 17x105 4 POA
194-048 1x15ml conical 16.5x121 4 POA
194-522 3x13.5/10ml 16x76 4 POA
194-523 7x8ml 12x100 4 POA
194-524 7x5ml 12x75 4 POA
194-525 7x3ml RIA 11x70 4 POA
194-526 5x2/1.5ml 10x41 4 POA
194-042 3x15/10ml Vac 16x100 4 POA
194-527 3x7ml Vac 13x100 4 POA
194-528 3x5ml Vac 13x75 4 POA
Adaptors for O-G26/2, O-G26/3, O-G26/4 and F-G3 Rotors for PK110 Centrifuge
Cat. No. Capacity/tubes Dimensions, mm Pack Price
193-722 1x13.5/10ml 16x76 1 POA
193-632 1x8/7ml Vac 13x100 1 POA
193-720 1x5ml Vac 13x75 1 POA
193-721 1x3ml RIA 11x70 1 POA
193-631 1x2/1.5ml 10x41 1 POA
193-703 1x8/7ml 12x100 1 POA
193-777 1x7/5ml 13x75 1 POA
Adaptors for F-G1, Angle Rotor for PK110 Centrifuge
Cat. No. Capacity/tubes Dimensions, mm Pack Price
193-705 1x50ml 28.5x105 6 POA
194-533 1x38.5/30ml 25.6x88.5 6 POA
193-699 1x16/15ml 18x100 6 POA
193-700 1x15ml conical 16.5x121 6 POA
193-701 1x10ml 16x82 6 POA
193-702 1x2/1.5ml 10x41 6 POA
Adaptors for A-G12, Angle Rotor for PK110 Centrifuge
Cat. No. Capacity/tubes Pack Price
193-627 1x0.5ml (dia.8mm) 20 POA
193-626 1x0.5ml (dia.6mm) 20 POA
193-629 1x0.25ml PCR 20 POA
Adaptors for 4x135ml Swing Out Rotor
Adaptors for 16x15ml Swing Out Rotor
Adaptors for 6x50ml Fixed Angle Rotor
Adaptors for 20x1.5/2ml Angle Rotor
Order by phone➤ 01342 826836 Order on-line➤ www.ecomcat.co.uk
Order by fax➤ 01342 826771 Website➤ www.jencons.co.uk
CentrifugesThermo Electron
Take a look at our latest products on www.ecomcat.co.uk 215
Adaptors for O-F25 and O-V25 Swing Out Rotors for the PK130 Series and the PK131Series Centrifuges (pages 211 to 212)
Cat. No. Capacity/tubes Dimensions, mm Pack Price Cat. No. Capacity/tubes Dimensions, mm Pack Price
193-656 1x280ml 64x109 4 POA 193-670 7x15ml Urine 17x105 4 POA
193-657 1x250ml 61x133 4 POA 193-783 4x15ml Conical 16.5x121 4 POA
193-781 1x190ml 54.5x106.5 4 POA 193-671 5x15ml Conical* 16.5x121 4 POA
193-698 1x190ml 56.2x112.5 4 POA 193-672 12x13.5/10ml 16x76 4 POA
193-782 1x175ml Conical 60x120 4 POA 193-673 19x8ml 12x100 4 POA
193-658 1x135 ml 43.4x112 4 POA 193-674 19x5ml 12x75 4 POA
193-659 1x110/100ml 40x113 4 POA 193-675 19x3ml 11x70 4 POA
193-660 1x94ml 38x101 4 POA 193-676 13x2.0/1.5ml 10x41 4 POA
193-661 2x65/50ml 34x100 4 POA 193-677 4x15ml 15.5x124 4 POA
193-662 4x50ml 28.5x105 4 POA 193-678 4x15ml Vacutainer* 16x125 4 POA
193-663 2x50ml Conical 28x116 4 POA 193-679 12x7ml Vacutainer 13x100 4 POA
193-664 5x38/30ml 25.6x88.5 4 POA 193-680 12x5ml Vacutainer 13x75 4 POA
193-665 5x30/25ml 24x95 4 POA 193-681 1 Amicon Centriprep — 4 POA
193-666 4x25ml Corex 24x104 4 POA 193-682 4x30ml Univ. (plastic) 25x85 4 POA
193-667 9x16/15ml 18x100 4 POA 194-537 3x30ml Glass Univ 29x85 4 POA
193-668 12x15/10ml Vacutainer 16x100 4 POA 194-538 2x50ml Conical skirted 28x116 4 POA
193-669 9x15/10ml 16x120 4 POA 194-218 3x50ml Conical* 28x116 4 POA
* Without C507 sealing cap
Adaptors for O-E24 and O-M24 Swing Out Rotors for the PK120 Series and the PK121Series Centrifuges (pages 208 to 209)
Cat. No. Capacity/tubes Dimensions, mm Pack Price Cat. No. Capacity/tubes Dimensions, mm Pack Price
193-655 1x190ml FB* 54.5x106.5 4 POA 193-645 3x15ml Urine 17x105 4 POA
193-636 1x135ml 43.4x112 4 POA 193-646 3x15ml Conical 16.5x121 4 POA
193-637 1x110/100ml 40x113 4 POA 193-647 9x8ml 12x100 4 POA
193-638 1x94/85/80ml 38x101 4 POA 193-648 12x3ml RIA 12x75 4 POA
193-639 1x65/50ml 34x100 4 POA 193-649 6x2.0/1.5ml 10x41 4 POA
193-640 1x50ml 28.5x105 4 POA 193-650 3x14ml Corning* 15.5x124 4 POA
193-784 1x50ml Conical 28x116 4 POA 193-651 3x15ml Vacutainer* 16x125 4 POA
193-641 2x38/30ml 25.6x88.5 4 POA 193-652 5x10ml Vacutainer 16x100 4 POA
193-642 2x30/25ml 24x95 4 POA 193-653 5x7/5ml Vacutainer 13x75 4 POA
193-643 2x25ml Corex 24x104 4 POA 193-654 1xAmicon Centriprep — 4 POA
193-630 5x16ml Corex 18x100 4 POA 193-715 1x30ml Univ. (plastic) 25x85 4 POA
193-644 7x15/10ml 16x76 4 POA 194-535 1x50ml Conical skirted 28x116 4 POA
* Without C506 sealing cap
Order by phone➤ 01342 826836 Order on-line➤ www.ecomcat.co.uk
Order by fax➤ 01342 826771 Website➤ www.jencons.co.ukThermo Electron
Centrifuges
216 Take a look at our latest products on www.ecomcat.co.uk
Adaptors for F-E6, F-M6, F-F6 and F-V6 Angle Rotors
Cat. No. Capacity/tubes Pack Price
193-722 1x13.5/10ml 1 POA
193-632 1x8/7ml 1 POA
193-703 1x8/7/5ml Conical 1 POA
193-720 1x5ml 1 POA
193-721 1x3ml 1 POA
193-631 1x2.0/1.5ml 1 POA
193-777 1x7/5ml 1 POA
Adaptors for A-E10, A-M10, A-F10 and A-V10 Angle Rotors
Cat. No. Capacity/tubes Pack Price
193-705 1x50ml* 6 POA
193-699 1x16ml 6 POA
193-700 1x15ml Conical 6 POA
193-701 1x10ml 6 POA
193-702 1x2.0/1.5ml 6 POA
* This adaptor is not suitable for A-M10 and A-V10 rotors.
Adaptors for A-E12, A-M12, A-M21, A-F12, A-V12 and A-V21Microtube Angle Rotors
Cat. No. Capacity/tubes Pack* Price
193-627 1x0.5 Ø 8mm 20 POA
193-626 1x0.5 Ø 6mm 20 POA
193-629 1x0.25 PCR 20 POA
*Two packs should be ordered for use with the A-M21 and A-V21 rotors as they both hold 24 adaptors.
Racks for A-M6 and A-V6 Drum Rotors
Cat. No. Capacity/tubes Pack Price
193-717 10x2.0/1.5ml 1 POA
193-719 20x0.6/0.8ml 1 POA
193-718 32x0.25/0.5ml 1 POA
193-716 20x0.7ml 1 POA
Adaptors for A-V18 Angle Rotor
Cat. No. Capacity Pack Price
193-683 1x65/50ml 6 POA
193-684 1x50ml 6 POA
193-685 1x50ml Conical 6 POA
193-686 1x38/30ml 6 POA
193-687 1x30/25ml 6 POA
193-688 1x16/15ml 6 POA
193-689 1x15ml Urine 6 POA
193-690 1x15ml Conical 6 POA
193-691 1x13.5/10ml 6 POA
193-692 3x8ml 6 POA
193-693 3x8ml 6 POA
193-694 4x5ml 6 POA
193-695 4x3ml 6 POA
193-696 3x2.0/1.5ml 6 POA
193-697 10x0.5ml 6 POA
Adaptor for A-M13 and A-V13 Rotors
Cat. No. Description Pack Price
193-707 1x2.0/1.5ml 10 POA
For rotors see pages 210 and 213 as appropriate.
Adaptors for 30x15ml Angle Rotor
Adaptors for 6x50ml Angle Rotor
Adaptors for 20x1.5/2ml Angle Rotor
Rack for Rotor Drums
Adaptors for AV18 Angle Rotor
Order by phone➤ 01342 826836 Order on-line➤ www.ecomcat.co.uk
Order by fax➤ 01342 826771 Website➤ www.jencons.co.uk
CentrifugesJencons-PLS
Take a look at our latest products on www.ecomcat.co.uk 217
193-012Mini CentrifugeThe Jencons-PLS mini centrifuge is designed for quick spins and microfiltration. It is supplied completewith two interchangeable rotors; one for 6x1.5/2.0ml microtubes and one for 2 strips of 8 PCR tubes(0.2ml). Adaptors are available for 0.5ml, 0.4ml and 0.2ml tubes.
SpecificationSpeed range, rpm 6000Maximum RCF, x g 2000*Maximum capacity, ml 6x1.5/2.0 tubes (or 0.5/0.4/0.2ml**) 2x 8x0.2 strip tubes Dimensions (wxdxh), mm 150x150x117Weight, g 450Power supply 230V, 50Hz
* Average max. RCF in the strip tube rotor is 1177x g ** Using accessory adaptors
Cat. No. Description Price
193-012 Mini centrifuge supplied with rotor for 6x1.5/2.0ml tubes and rotor for 2 strips POAof 8x0.2ml PCR tubes
Accessories
Cat. No. Description Pack size Price
193-981 Adaptors for 0.5/0.6ml tubes 6 POA
193-982 Adaptors for 0.4/0.25ml tubes 6 POA
193-983 Adaptors for 0.2ml tubes 6 POA
Replacement rotors are available, please contact our Technical Office on 01342 826836 for details.
Spectrafuge MicrocentrifugeThe new Spectrafuge features a unique, easy access rotor, multi-flow air cooling system and highperformance drive. Two ‘smart’ knobs are used to control all operating parameters, while speed andtime are shown digitally on large displays.
A specially designed air cooling system passes ambient air over both the top and bottom of the rotor aswell as through the motor chamber. The result is a cool running microcentrifuge that keeps samplesclose to ambient temperature, even during extended runs at maximum speed. For samples that requirebelow ambient temperature, the Spectrafuge may be used in a cold room.
The Spectrafuge is supplied with a 24-position angle rotor for microtubes, which is easily removed forcleaning and autoclaving. The unique design of the rotor allows for easy access to the sample tubes. Itaccepts 1.5/2.0ml tubes directly and smaller tubes through the use of accessory adaptors. An optionalStripSpin adaptor ‘snaps’ on top of the rotor for spinning 0.2ml tubes and strips.
SpecificationSpeed range, rpm 13,300Maximum RCF, x g 16,300Maximum capacity, ml 24x1.5/2.0Timer 30 minutes, continuous or momentary operationDimensions (wxdxh), mm 235x293x216Weight. kg 8.2Power supply 220V, 50/60Hz
Cat. No. Description Price
193-007 Spectrafuge, microcentrifuge supplied with rotor for 24x1.5/2.0ml tubes POA
Accessories
Cat. No. Description Pack size Price
193-009 StripSpin adaptor for 0.2ml strip tubes 1 POA
193-981 Adaptors for 0.5/0.6ml tubes 6 POA
193-982 Adaptors for 0.4/0.25ml tubes 6 POA
193-983 Adaptors for 0.2ml tubes 6 POA
■ Precise digital control ■ Unique 24 x 1.5/2.0ml easy access rotor ■ Powerful, brushless drive ■ High maximum speed: 13,300rpm/16,300 x g
■ Display rpm or g-force ■ Exceptionally quiet and cool running ■ Optional StripSpin™ adaptor for 0.2 ml
tubes and strips
■ Ideal for microfiltration and quick spins ■ Durable lid hinge
■ Compact design, small footprint ■ On/off switch
New
193-007 New
193-009 New
Order by phone➤ 01342 826836 Order on-line➤ www.ecomcat.co.uk
Order by fax➤ 01342 826771 Website➤ www.jencons.co.ukA.Q.S.
Centrifuges
218 Take a look at our latest products on www.ecomcat.co.uk
194-600 BS400 and BR401 CentrifugesThe BS400 and BR401 centrifuges are supplied with or without refrigeration and are ideal for generalpurpose centrifugation. Designed and manufactured with extensive safety features including locks andautomatic shutdown devices, these centrifuges are available with a full set of accessories includingswing-out and angle rotors.
SpecificationsModel BS400 BR401Maximum capacity, ml 4x100ml 4x100mlMaximum speed, rpm 6,000 6,000Maximum RCF, x g 4,060 4,060Timer, mins 0–30 0–30Power, VA 480 600Dimensions (wxdxh), mm/Weight, kg 405x540x385/35 700x550x385/70Electrical requirement 220V/50Hz 220V/50Hz
Cat. No. Description Price
194-600 BS400 Bench top centrifuge without rotor POA
194-601 BR401 Refrigerated, bench top centrifuge without rotor POA
Both models are supplied with a stainless steel bowl. An enamel bowl can be supplied if preferred. Please contactour Technical Office on 01342 826836.
RotorsCat. No. Description Capacity, ml Max. speed, rpm Max. RCF Price
194-602 B400/3 Four place swing-out rotor, requires 4x100 4300 3190 POA4x B400/16 buckets
194-603 B400/1 Angle rotor, requires 6x B400/5 buckets 6x50 6000 3970 POA
194-604 B400/2 Angle rotor, requires 10x B400/6 buckets 10x15 6000 4060 POA
194-605 B400/1A Lid for B400/1 and B400/2 angle rotors ———— ———— ———— POA
Sealed Bucket for B400/3 Swing-Out RotorCat. No. Description Pack Price
194-607 B400/16 Sealed bucket complete with cap 4 POA
194-613 B400/35 Spare plastic caps for B400/16 buckets 4 POA
194-614 B400/36 Spare ‘o’ ring for B400/16 buckets 4 POA
Adaptors for Sealed Buckets B400/16Cat. No. Description Capacity Pack Price
194-608 B400/30 Cushion 1x100ml test tube 4 POA
194-609 B400/31 Adaptor 1x50ml tube or universal 4 POA
194-610 B400/32 Adaptor 4x15ml tubes 4 POA
194-611 B400/33 Adaptor 3xcapped 10ml blood tubes 4 POA
194-612 B400/34 Adaptor 7x12.5mm dia. (max), 64-75mm long 4 POA
194-615 B400/37 Adaptor 3x5ml blood tubes, capped 4 POA
194-616 B400/38 Adaptor 4x5ml (narrow) blood tubes, capped 4 POA
Buckets, Carriers and TrunnionsCat. No. Description Capacity Pack Price
194-617 B400/6 Stainless steel bucket including cushion for B400/2 Angle rotor 15ml 1 POA
194-623 * B400/12 Trunnion for 4x15ml buckets B400/6 4x15ml 4 POA
194-618 B400/5 Stainless steel bucket including cushion for B400/1 Angle rotor 50ml 1 POA
194-622 * B400/11 Trunnion for 2x50ml buckets B400/5 2x50ml 4 POA
194-619 B400/7 Stainless steel bucket including cushion 100ml 1 POA
194-621 * B400/10 Trunnion for 100ml bucket B400/7 1x100ml 4 POA
194-620 B400/15 Carrier for use with BS400/3 Swing-out rotor 10x7ml tubes 4 POA
* Allows buckets to be used with B400/3 Swing-out rotor
Spare Cushions and Motor BrushesCat. No. Description Pack Price
194-624 B400/6A Cushion for 15ml bucket B400/6 6 POA
194-625 B400/5A Cushion for 50ml bucket B400/5 and B400/31 adaptor 6 POA
194-626 B400/5B Hemispherical cushion for glass universal container in bucket B400/5 6 POA
194-627 B400/7A Cushion for 100ml bucket B400/7 6 POA
194-628 B400/15A Cushion for B400/15 carrier 12 POA
194-629 B400/80 100ml glass tube 1 POA
194-630 776/003 Spare brushes for motor 2 POA
New
Order by phone➤ 01342 826836 Order on-line➤ www.ecomcat.co.uk
Order by fax➤ 01342 826771 Website➤ www.jencons.co.uk
CentrifugesNickel Electro
Take a look at our latest products on www.ecomcat.co.uk 219
194-154Clifton, NE000 Series, MicrocentrifugeA compact personal microcentrifuge designed for microtubes or PCR strips for simple and quick spins.
It has a small footprint and the rotor can be easily removed for cleaning or fitting alternative rotors. It issupplied with a rotor which accepts 0.5 and or 1.5ml microtubes.
SpecificationOperation Rotor activated on speed selectionSpeed, rpm 2,000–8,000Rotor type Angle headTube capacity 0.5 and 1.5ml microtubesMax number tubes 6 each sizeMax RCF, g 4,000Overall dimensions (wxdxh), mm Lid closed 175x220x140
Lid open 175x220x320Voltage 230V, 50HzWeight, kg 2.6
Cat. No. Description Price
194-154 NE 000G/I Microcentrifuge supplied with fixed angle rotor POA
Optional Rotors
Cat. No. Model Max speed rpm Tube capacity Max number of tubes Price
194-155 R000-1 8000 1.5ml 12 POA
194-156 R000-2 8000 PCR strip 2 strips (of 8) POA
Clifton, NE010 Series, Targa CentrifugeThe Targa centrifuge is designed specifically as a low cost, low energy product.
It is constructed with a durable steel body for safety and supplied with a four-place swing out rotorcomplete with removable buckets.
SpecificationOperation Rotor activated push buttonMax speed, rpm 2,800Rotor type Swing out*Tube capacity, ml 15Max number tubes 4Tube dims ø17x100mm
ø13x75mm with adaptorsø10x75mm with adaptors
Max radius, mm 130Max RCF, g 1,100Overall dimensions (wxdxh), mm Lid closed 361x400x320
Lid open 361x415x720Rating, W 100Voltage 230V, 50HzWeight, kg 8
* No alternative rotors available
Cat. No. Description Price
194-150 NE 010G Targa Centrifuge supplied with swing out rotor and adaptors POA
■ Maintaining finger pressure on the pushbutton operates the centrifuge and locksthe lid in position
■ The rotor can only be activated when the lidis correctly closed and locked
■ A viewing window in the lid enables therotor motion to be observed
■ Releasing finger pressure de-energises the rotor
■ ‘Rotor energised’ warning indicator lamp■ Easy wipe clean bowl with no crevices■ Rotor can be removed for easy cleaning■ 3 year warranty
■ Lid interlock whilst rotor is energised■ Quiet and smooth operation■ Speed control variable up to 8,000rpm■ Dynamic braking■ Ideal for quick spin downs■ Easy to use
■ Suitable for micro filter cell separations andHPLC samples
■ Durable chassis■ Non slip feet for stability and safety■ 3 year warranty
New
194-150 New
194-150 open New
194-154 open New
Order by phone➤ 01342 826836 Order on-line➤ www.ecomcat.co.uk
Order by fax➤ 01342 826771 Website➤ www.jencons.co.ukNickel Electro
Centrifuges
220 Take a look at our latest products on www.ecomcat.co.uk
194-151 Clifton, NE010 Series, Interlock CentrifugesThis range consists of two models constructed with a steel body and supplied with a four-place swing outrotor complete with removable aluminium buckets. Both models feature ‘safety interlock’, whichprevents the lid being opened until the rotor is at rest. Supplied with a 3 year warranty.
An additional safety feature ensures that in the event of power failure the lid remains in the lockedposition. The centrifuge can only be operated if the lid is correctly closed and locked in position.
■ Control panel has a series of indicator lamps - for rotor on, lid locked and rotor run down
Model NE 010G/I■ Maintaining finger pressure on the push button operates the centrifuge and locks the lid in position■ Releasing finger pressure de-energises the rotor, but the lid remains locked until the rotor is at rest
Model NE 010GT/I■ Timer allows variable rotor operation up to 30 mins
- push button activates timer - lid remains locked until rotor is at rest
SpecificationsModel NE 010G/I NE 010GT/IOperation Rotor activated push button TimerMax speed, rpm 2,800 2,800Rotor type Swing out or angle head* Swing out or angle head*Tube capacity, ml max 15 max 15Max number tubes 4 4Tube dims ø17x105mm/ø13x95mm with adaptors/
ø10x95mm with adaptors (both models)Max radius, mm 135 135Max RCF, g 1,200 1,200Timer ———— 0–30 minsOverall dimensions (wxdxh), mm Lid closed 361x400x320/
Lid open 361x415x720 (both models)Rating, W 100 100Voltage 230V, 50Hz 230V, 50HzWeight, kg 9.1 8.9
Cat. No. Description Price
194-151 NE 010G/I Centrifuge supplied with swing out rotor and adaptors POA
194-152 NE 010GT/I Centrifuge with timer, supplied with swing out rotor and adaptors POA
* See page 221 for alternative rotors and adaptors.
Clifton, NE020 Series, Interlock, Analogue CentrifugeThis centrifuge is ideal for clinical applications and is supplied with a fixed angle head rotor for test tubes.
SpecificationOperation TimerSpeed, rpm 500–3,500rpmRotor type Angle head*Tube capacity 15mlMax number tubes 6Tube dims ø17x120mmMax radius, mm 120Max RCF, g 1300Overall dimensions (wxdxh), mm Lid closed 340x290x225/
Lid open 361x435x515Rating 100WVoltage 230V, 50HzWeight, kg 13
* No alternative rotors available
Cat. No. Description Price
194-157 NE 020GT/I Centrifuge supplied with fixed angle rotor POA
■ Durable design with safety lid interlock■ Variable rotor speed and timer■ Selected rotor speed constantly monitored
and maintained■ Electronic timer■ Non slip feet
■ Easy to use - set time and speed - push button to start or stop
■ Warning indicators for rotation and lid unlocked■ 3 year warranty
New
194-151 openNew
194-152New
194-157New
194-157open
New
Order by phone➤ 01342 826836 Order on-line➤ www.ecomcat.co.uk
Order by fax➤ 01342 826771 Website➤ www.jencons.co.uk
CentrifugesNickel Electro
Take a look at our latest products on www.ecomcat.co.uk 221
194-158Clifton, NE030 Series, Interlock, Digital Centrifuge A bench top centrifuge with wipe clean control panel, touch pad controls and digital display, broad speedrange and in-built safety monitoring system. Featuring “active lid cooling” making it suitable for biologicalseparations and samples which can suffer heat damage. The active cooling draws fresh air in from outsideand expels warm air from the rotor assembly through the back of the lid. Supplied without a rotor. Fouraccessory rotors are available for a variety of tubes from micro to conical tubes.
Safety features include automatic rotor imbalance alarm and rotor recognition limiting the maximumpermissible speed.
Easy to use with digital display of speed, acceleration, braking and time settings.
SpecificationOperation TimerSpeed, rpm 500–13000Rotor type Angle head (not supplied)*Timer, mins 6–60minsBraking/acceleration 1–9 levelsOverall, dims (wxdxh), mm Lid closed 275x330x240/Lid open 275x330x670Rating 400WVoltage 230V, 50-60HzWeight, kg 14
* Accessory rotors - see below.
Cat. No. Description Price
194-158 NE 030GT/I Centrifuge supplied without a rotor POA
■ Easy to read digital display■ Brake and acceleration control■ Touch button controls■ Speed and time setting■ Audible alarm at end of timed period
■ Wipe clean chemical resistant control panel■ Active cooling system to reduce thermal shock■ Powder painted body providing a durable finish■ 3 year warranty
New
Accessories Rotors and Adaptors for NE 030 Centrifuge
Cat. No. Description Max RPM/RCF Capacity, ml Tube dims, mm Max radius, mm Price
194-159 R030-1 Angle rotor, 55° 5000/2800 8x15/12 ø17x120 100 POA
194-170 T030-5 Adaptors for R030-1 (Pack 8) 5000/2800 8x10 ø17x100 100 POA
194-160 T030-1 Adaptor for R030-1 (Pack 8) 5000/2740 8x7 ø12x100 98 POA
194-161 T030-2 Adaptor for R030-1 (Pack 8) 5000/2375 8x5 ø12x75 85 POA
194-162 R030-2 Angle rotor, 55° 5000/2800 6x15 or ø17x120 100 POA5000/2800 12x12 ø17x100 100
194-171 T030-6 Adaptors for R030-2 (Pack 12) 5000/2800 12x10 ø17x100 100 POA
194-163 T030-3 Adaptor for R030-2 (Pack 12) 5000/2740 12x7 ø12x100 98 POA
194-164 T030-4 Adaptor for R030-2 (Pack 12) 5000/2375 12x5 ø12x75 85 POA
194-165 R030-3 High speed angle rotor, 45° 13000/12280 24x0.25 and ø6x30 65 POA13000/15120 24x1.5 ø11x40 80
194-166 R030-4 Haematocrit rotor 13000/17380 24 glass tubes ø1.2x75 92 POA
Rotors for NE 010G/I and NE 010GT/I Centrifuges
Cat. No. Description Max RPM/RCF Capacity, ml Tube dims, mm Max radius, mm Price
194-153 R010-1 Angle rotor 2800/1000 4x15-12 or ø17x110 110 POA2800/1000 4x7* ø13x110 110
194-169 T010-1 Adaptor for R010-1 (Pack 4) 2800/880 4x5** or ø13x95 100 POA2800/880 4x3** ø10x95 100
194-167 R010-2 Angle rotor, 55° 2800/1100 8x15-12 or ø17x110 123 POA2800/1100 8x7* ø13x110 123
194-169 T010-1 Adaptor for R010-1 (Pack 4) 2800/1000 8x5** or ø12x95 115 POA2800/1000 8x3** ø10x95 115
194-168 R010-3 Swing out rotor 2800/1200 2x50 ø30x120 135 POA
* Using adaptors supplied as standard with the NE 010G/I and NE 010GT/I centrifuges. ** Using adaptors supplied as standard with the centrifuges and optional T010-1 adaptors.