J.Byrne 2015 1

Sofa TableCourse work 12/13

J.Byrne 2015 2

Sofa TableCourse work 12/13

J.Byrne 2015 3

Q 2. Produce an orthographic drawing of the Sofa Table shown in the drawing provided at a scale of 1:5. Include eight dimensions. (5%)

Q 3. Produce an Isometric drawing of the Sofa Table shown in the drawing provided at a scale of 1:5. Do not dimension. (5%)

Specifications: The Top has 70mm cross banding all

around with an ellipse size Major 500mm, Minor 260mm centred on the table.

The ellipse is divided in 30° segments. The bottom rail is 20mm x 20mm and is

flush with legs. The Top has a 15mm round moulding all around.

Sofa TableCourse work 12/13

J.Byrne 2015 4

The shaped Pull Rail is detailed as below in Fig 1.

Draw Orthographic

Each View should fit inside a box equal to overall sizeEach view relates to another viewDraw height line and keep as dimension line using Tee square bring each height across to both drawings

J.Byrne 2015 5

Draw Orthographic

Put light box around ellipse

Put light box around quadrant

J.Byrne 2015 6

Draw isometric box overall size of Table 1040mm x 500mm x 500mm at the correct scale

J.Byrne 2015 7

Divide quadrant into equal lines

Divide quarter of circle into 5mm spaces Divide quarter of ellipse into 5mm spaces

J.Byrne 2015 8

Repeat steps on isometric

Number each division and take measurements from plan and mark off on isometric

J.Byrne 2015 9

Complete drawing

Draw in leg frame taking all measurements from elevation and end view

J.Byrne 2015 10

Sofa TableCourse work 12/13

J.Byrne 2015 11

Sofa Table Course work 12/13

Q 2. Produce an orthographic drawing of the Sofa Table shown in the drawing

provided at a scale of 1:5. Include eight dimensions. (5%)

Q 3. Produce an Isometric drawing of the Sofa Table shown in the drawing

provided at a scale of 1:5. Do not dimension. (5%)

Specifications: The Top has 70mm cross banding all around with an ellipse size Major

500mm, Minor 260mm centred on the table. The ellipse is divided in 30° segments. Fig 2 The bottom rail is 20mm x 20mm and is flush with legs. The Top has a 15mm round moulding all around. The shaped Pull Rail is detailed as below in Fig 1

J.Byrne 2015 12