INTERNATIONAL UNIVERSITY COLLEGE OF TECHNOLOGY

TWINTECH

FORMULA STUDENTBY

HAIFREE BIN HAISONMODH JALALLUDINMOHD FAKHRUL IZZAT BIN NORDIN

-DIPLOMA IN MECHANICAL ENGINEERING-

SUPERVISOR: MR. FAIZ

CONTENT OF PRESENTATION

1. INTRODUCTION

2. LITERATURE REVIEW

3. RESEARCH AND METHODOLOGY

4. RESULTS AND ANALYSIS

5. CONCLUSION AND RECOMMENDATION

Chapter 1 : Introduction

Background

• To create something new in formula student with different parts in combination of formula 1 and also formula varsity.

• This formula student use 3-cyclinder engine, different with formula 1 use 6-cyclinder engine and formula varsity use 2-cyclinder engine.

Problem Statement

• The system uses by combined in both formula varsity and formula 1 to build a formula student.

Objective

• To create something new in a world of automotive

• To understand better about this formula student and compared with ordinary car.

Project Scope

• We have use 3-cyclinder engine to build this formula student and show the different with formula1 and formula varsity.

Significance Of Studies

• This formula student is a development of combination formula varsity and formula 1.

• It show the differences in formula varsity with uses 3-cyclinder engine rather 2-cyclinder engine and hope this is another step forward in new formula varsity contest.

Limitation

• The engine can only goes to 60 mPh – 90 mPh.• The cockpit can only support the weight of

60kg.

Chapter 2: Literature review

Literature Review TableNAME TITLE/YEAR SUMMARIZATION

Donald Cheah TOP GEAR magazine(March 2009 )

The history of formula three and the idol CLAY REGAZZONI.

Donald Cheah TOP GEAR magazine(September 2009)

The legendary F1 driver in 70’s FRANCOIS CEVERT and make the F1 top sport in 70’s.

Donald Cheah TOP GEAR magazine(April 2010)

Lotus is back in F1 after 16 years and how the lotus team made their F1 with their own technology.

Donald CheahTOP GEAR magazine(December 2010)

Show that in the 80’s year, the F1 engine turbocharged cars were the king that time.

Chapter 3: Methodologies

Block Diagram Part

oilsam

Engine

Block Cylinder head

front wheel

Rear wheel

gear

Shift gear

Brake

FORMULA STUDENT

gearbox

Cut the dimension(engine and body frame)

Assemble part of engine

Wiring and assemble the brake system

Welding and joining(engine and body frame)

Create a detail design

Start

Painting and finishing work

Finish

Tighten the screw and welding finishing

Install engine

Check the engine performance

Chapter 4 : Result & Analysis

PROBLEMS ENCOUNTERED

& COUNTERMEASURES

PROBLEM 1 : Engine frame mounted upside down

Solution : Change the frame back

Chapter 5 : Conclusion & Recommendation

Conclusion

• This project is a one step forward for formula student and also hope in formula varsity for new contest in different engine capasity.

• With this 3-cyclinder engine for formula student it is something new and differences for formula 1 and formula varsity.

Recommendation

• Can be modified to improve the perfomance of the engine.

• The introduction for new clases contest in formula varsity for 3-cyclinder engine.

• Hope our project can be continous by junior student

References• Formula varsity UTeM 2010 UTeM : Formula Varsity is an international student

racing competition that challenges students to design, manufacture and race their single seat open-wheel formula style racing car in real track condition. http://www.google.com.my/#hl=en&source=hp&biw=1360&bih=677&q=formula+varsity&aq=f&aqi=g5&aql=f&oq=&gs_rfai=&fp=9d97ed1970f5a345

• Rules of formula varsity UTeM : FORMULA VARSITY TECHNICAL SPECIFICATIONS http://www.google.com.my/url?sa=t&source=web&cd=3&ved=0CCQQFjAC&url=http://formulavarsity.utem.edu.my/index.php%3Foption%3Dcom_docman%26task%3Ddoc_download%26gid%3D2%26Itemid%3D40&rct=j&q=formula%20varsity&ei=ViMjTczZL4_OrQfymrDdCw&usg=AFQjCNFG0vMZtan8hsyAdfgBCL8uKBI_4Q

• Formula student Germany : International design competition http://www.formulastudent.de/

• Perodua kancil engine specifications http://www.perodua.com.my/index.php?section=ourcars&page=kancil&action=specs

• Making a Chassis Frame Alignment Jig : based on a chassis checking jig from the factory workshop manual http://www.mig-welding.co.uk/chassis-jig.htm

• Kartbuilding Blog : SolidWorks CAD Drawing Of Tony Cart Chassis http://blog.kartbuilding.net/category/chassis-design/

THANK YOU