Intech Oil & Gas Overvie · Intech Oil & Gas Overview Group Organization: ... •Avoid costly shut...

Intech Oil & Gas Overview

Group Organization: INTECH OIL & GAS GROUP(HQ in SELANGOR)

PENANG OFFICE

PAHANG OFFICE

MIRI OFFICE

JOHOR BHARU OFFICE

Contact Information:

Intech Oil & Gas Sdn Bhd (788182-H):No.14A, Jalan Utama 2/2, Taman Perindustrian PuchongUtama, Seksyen 2, 47100 Puchong, Selangor, MalaysiaNur Khairiatun Nisa MohtarH/P: (601) 2201 6429Tel: (603) 8060 2724Fax: (603) 8060 3691Email : nisa@intechOG.comWeb : www.intechOG.com

Strategic Alliance Partnerwww.intechOG.com

Intech Oil & Gas OEM Service CentreNo.14A, Jalan Utama 2/2, Taman PerindustrianPuchong Utama, Seksyen 2, 47100 Puchong, Selangor, MalaysiaDavid LooH/P: (601) 2329 3122Tel: (603) 8060 2724Fax: (603) 8060 3691Email : intechog@streamyx.com

Products & Services Supply Ability

INTECH OIL & GAS’ main product lines:

• API 610 centrifugal pumps

• API 674/675 reciprocating pumps and

diaphragm pumps,

• API 676 Lobe Rotary pumps,

• ANSI B73.1 magnetic-drive pumps,

• ASME B73.2M vertical in-line pumps,

• DIN 24255/ISO 2858 chemical process

pumps, acid pump,

• ISO 2858 & ISO 5199 water pumps,

• NFPA 20 fire water pumps, Blowers,

compressors & steam turbines,

• Filter, agitator, separator & gas scrubber,

• JIS Standard Latex Emulsion Pumps, Self

Priming Pumps, slurry Pumps, Rotor Jet

Pumps.

INTECH OIL & GAS’ main Service lines:

I. On-line Services (Under Pressure):

• On-Line Leak Sealing

• On-Line Safety and Relief Valve

Testing

• Hot Tapping

• Pipe Wrapping (Pipe Re-habilitation

System)

II. Off-line Services (Plant Shut Down):

• Controlled Bolt Tightening

• On-site Machining

• Induction Heating (Heat Applications)

• Pump & Valve Repair

Intech Oil & Gas Technical Services Abilities

Our Markets

We Serve the following industries :

• Power Generation

• Oil Refinery Plant

• Petrochemicals Plant

• Oleo-chemicals Plant

• Offshore & Marine Industries

• Fabrication Shop & Many more….

Leak Sealing Services

• On-line Services (Under Pressure):– On-Line Leak Sealing

– On-Line Safety and Relief Valve Testing

– Hot Tapping

– Pipe Wrapping (Pipe Re-habilitation System)

• Off-line Services (Plant Shut Down):– Controlled Bolt Tightening

– On-site Machining

– Induction Heating (Heat Applications)

– Pump & Valve Repair

What is on-line sealing?

• On-Line Leak Sealing is a temporary process used to seal an undesirable or hazardous leaks from a failed piping systems, enabling the production to continue without plant shut down.

• Products sealed:– Nitrogen, Water, Air

– BFW and HP Steam

– Chemicals, Hydrocarbon, Gases etc.• Temperature: Up to 700*C

• Line Pressure: Up To 260 bar

Benefits of On-line Leak Sealing

• Avoid costly shut downs – Repair on-site and on-stream

• Conserve energy and resources – No off specification products produced

• Reduces or eliminates health and safety concerns – Safety First!

• Environmentally friendly – Less pollutants emitted

Typical Leak Sealing

• Valve Flange & Bonnet

• Valve Gland Packing

• Valve Pressure Seal Ring

• Elbow & Tee Joint

• Exchanger Joint

• Pipe & Weld seam etc.

Elbow Leak Sealing

1. 1” socket elbow leak

3. Compound injection

2. Box clamp installation

4. Job Done

Flange Leak Sealing

1. Flange Leak

2. Clamp installation and compound injection

3. Job done

On-Line Safety Valve Testing

• On-line Safety and Relief Valve Testing System allows the plant to continue operating under normal condition whilst the task of testing and certifying the plant safety and relief valves is carried out. The system can also be used to perform cold testing when the plant is down, to test and verify the set pressure

Benefits of On-line Safety Valve Testing

• No interruptions to plant production – considerable cost savings and operational advantages (No plant downtime).

• Accurate on-line diagnosis – plus/minus 1% of set pressure.

• Welded in valves can be tested and adjusted on-line without removal

• Test on-line under operating conditions – no need for temperature correction.

• Accurate and reproducible evaluation of set pressure –eliminates guess work and human error of where the set point occurs.

Safety Valve Testing Equipment

1. Overview of TESON equipment

2. Set up of Test Ring

Our equipment TESON

Safety Valve Test Graph Record

Spring Performance

Special feature in TESON – Diagram of force over lift to enable a precision identification of the set pressure point

Standard Diagram

Force, Lift and system pressure recorded over the test time

What is on site machining?

• On site machining allow plant equipments to be machined in place, hence reduce downtime and cost incurred for the dismantling and the transportation.

• The machining process is carried out within customer control at their premises. The quality of our on-site machining is compatible with the conventional workshop machining in terms of finishing, tolerance and accuracy

Applications of On-site Machining

• Flange Facing – Raised Face, RTJ, Lens Ring and Spigot etc.

• Milling – Pump / Motor Base Plates and Partition Grooves / Plates etc.

• Cold Cut – Pipe Cutting / Beveling

• Drilling and Tapping

• Line Boring etc.

Flange Machining

Flange Facing of 56” raised face flange

Flange facing of RTJ flange

Strategic Alliance Partnerwww.intechOG.comwww.intechOG.com

Milling

Heat Exchanger Tubesheet Groove Milling

Pipe Cutting & Beveling

Pipe Cutting & Beveling Beveling of elbow joint using flange facing machine

Induction Heating

Fast, Safe & Clean Method For:

• Weld Preheat

• Post Weld Heat Treatment

• Hydrogen Bake Out

• Shrink Fitting / Removal

• Coating Cures

• Line Thaws / Melt-Out etc.

Induction HeatingTypical Setup Strategic Alliance Partnerwww.intechOG.com

Controlled Bolt Tightening

• Controlled bolt tightening is the preferred method for tightening of critical joints, by means of hydraulic torque tightening or bolt tensioning Knowing the joints design and the operating specification, leak free start up can be achieved by applying accurate bolt load in a controlled manner.

Hydraulic Bolt Tensioning

Hydraulic bolt tensioning on the vessel

Hydraulic bolt tensioning on Mainhole Cover

Hydraulic Bolt Torqueing

Hydraulic bolt torqueing on Mainhole Cover Hydraulic Bolt Torqueing

Composite Pipe Wrapping

• Composite Pipe Wrapping is a carbon fiber wrap systems used to rehabilitate and restore original operational strength to corroded and eroded pipelines and piping systems.

• It is engineered to provide strength that enables a pipeline to be restored to maximum allowable operating pressure (MAOP) without shutting down.

Advantages

• External application without shutdown

• No welding – No hot work permits - Safe

• Require less time to install

• Often lower overall cost*

Welded sleeves are 24% more expensive

Replacing damaged sections completely are 73% more expensive

Typical Repair Kit Strategic Alliance Partnerwww.intechOG.com

Typical ApplicationsStrategic Alliance Partnerwww.intechOG.com

Pipe WrappingStrategic Alliance Partnerwww.intechOG.com

Machining New Pump Shaft & Impeller Wear Rings Strategic Alliance Partner

Damaged SS316 Shaft

www.intechOG.com

Machining New Pump Shaft & Impeller Wear Rings Strategic Alliance Partnerwww.intechOG.com

Rebuilt of Pump Casing, Casing Cover, Impeller & Machine New Wear Rings

Strategic Alliance Partner

Pump Casing, Casing Cover, Impeller After Rebuilt / Refurbish

www.intechOG.com

Complete Refurbishment of Multi Stage Pump Strategic Alliance Partnerwww.intechOG.com

Petronas Carigali Pump Refurbishment Strategic Alliance Partnerwww.intechOG.com

Exxon Mobil Pump RepairStrategic Alliance Partnerwww.intechOG.com

Shell Pump RepairStrategic Alliance Partnerwww.intechOG.com

The Polyolefin Company (Singapore) Pump Repair Strategic Alliance Partnerwww.intechOG.com

The Polyolefin Company (Singapore) Pump Repair

Service Reference ListStrategic Alliance Partnerwww.intechOG.com

Summary

We are supported by experienced and multi-skill specialists working on wide range of disciplines. Our highly motivated workforce is committed to response quickly and efficiently to customer’s requirements without compromising our safety record.

By integrating the various services under one roof, Intech Pumps provides a once source solution to your maintenance activities On-Site and On-Time.

ON-SITE INTERGRITY SOLUTION

Intech Oil & Gas Overvie · Intech Oil & Gas Overview Group Organization: ... •Avoid costly shut...

Documents

Transcript of Intech Oil & Gas Overvie · Intech Oil & Gas Overview Group Organization: ... •Avoid costly shut...

Micro Gas Turbines - InTech - cdn.intechopen.comcdn.intechopen.com/pdfs/12089/InTech-Micro_gas_turbines.pdf · Micro Gas Turbines 147 combustion process to achieve the design turbine

bMark ADVANCED OIL & GAS - Oil & Gas Benchmarking

Oil & gas = economy economy = oil &gas february 2016

for Palm Oil Mill Effluent (POME) Treatment - cdn - InTech

Integrated Control - INTECH Process AutomationIntegrated Control Systems Automation Solutions for Oil & Gas ... Instrument Asset Management Systems (IAMS) Industrial Data Networks

InTech-Pyrolysis Gas Chromatography Mass Spectrometry of Polymeric Materials

Olive Oil Traceability - InTech - Open Science Open Minds

InTech-Materials for Gas Turbines an Overview(Modified)

Oil & Gas Research - Mosman Oil & Gas

InTech-Crude Oil by Epr

InTech-Modelling and Simulation of Natural Gas Liquefaction Process

InTech-Factors Affecting the Stability of Crude Oil Emulsions

Natural Gas Hydrates - InTech - Opencdn.intechopen.com/pdfs/35291/InTech-Natural_gas_hydrates.pdf · When a pipeline is shut-in, the fluid separates into the gas water and hydrocarbons

Metal Determinations in Olive Oil - InTech - Open Science Open

InTech-Gas Turbine Condition Monitoring and Diagnostics

The Oil Palm Wastes in Malaysia - InTech - Opencdn.intechopen.com/pdfs/44387/InTech-The_oil_palm_wastes_in... · The Oil Palm Wastes in Malaysia 77 All economic activity begins with

PROJECT WATCH PROJECT Adco - gab NONI' - Gas … Wat… · PROJECT Adco - gab NONI' - Gas AdCO - Field NGU UAE * FACILITY Oil Gas Oil Gas Oil Oil Oil Fie I d Oil Field Oil Field Oil

The Oil Palm Wastes in Malaysia - InTech

The Office of Oil and Gas; Oil and Gas Wellsdep.wv.gov › oil-and-gas › Resources › Documents › Dave...The Office of Oil and Gas; Oil and Gas Wells ... QC / QA – Quality Control

InTech-Ventilation Effectiveness Measurements Using Tracer Gas Technique