Insulin SEC Analysis - Sepax Technologies, Inc. · Insulin SEC analysis •Insulin Samples:...

Insulin SEC analysis

• Insulin Samples:– Lispro, identical in structure to Insulin Human,

except that it has lysine and proline at positions 28 and 29, respectively, of chain B, whereas this sequence is reversed in Insulin Human.

– Sigma human recombinant insulin, P/N 910776 – Custom insulin sample for column life time study– Degraded insulin sample (40 hours at 60 oC)

www.sepax-tech.comBetter Surface Chemistry for Better Separation © Sepax Technologies, Inc.

EE1004

Insulin-Lispro (Humalog)-mobile phase effect on ZenixTM-C SEC-80 ( 7830 )

Column: ZenixTM-C SEC-80 (3 µm, 80 Å, 7.8 x 300 mm) Mobile phase: as indicated, Flow rate: 1 mL/minDetector: UV 276 nm, Column temperature: 30 ℃, Injection volume: 10 µLSample: Insulin Lispro 3.47 mg/mL in phosphate buffer containing m-cresol

min0 2.5 5 7.5 10 12.5 15 17.5 20 22.5

A. 0.1% TFA, 50% ACNB. 0.1% Arginine:Acetonitrile:Acetic acid

(65:20:15)A. 10 mM Tris, 140 mM NaCl, pH 7.4

1. Insulin monomer2. M-cresol

Organic mobile phase minimizes the interaction between sample and column resin.

EE1004

Zoom in-Insulin Lispro (monomer and aggregate)

min4 5 6 7 8 9 10 11 12 13

Rs = 2.11

Rs = 3.28

Rs = 3.26 0.1% TFA, 50% ACN

0.1% Arginine:Acetonitrile:Acetic acid (65:20:15)

10 mM Tris, 140 mM NaCl, pH 7.4

EE1004

Column temperature- insulin Lispro

Column: ZenixTM-C SEC-80 (3 µm, 80 Å, 7.8 x 300 mm) Mobile phase: 0.1% Arginine:Acetonitrile:Acetic acid (65:20:15), Flow rate: 0.5 mL/min, Pressure: 38 barDetector: UV 276 nm, Column temperature: 37 ℃ and 30 ℃, Injection volume: 10 µL, Sample: Insulin Lispro 3.47 mg/mL in phosphate containing m-cresol

min0 5 10 15 20 25 30 35

1600 30 ℃37 ℃

Insulin monomer

M-cresol

EE1004

Pore size effect-insulin Lispro

Column: ZenixTM-C SEC-80 (3 µm, 80 Å, 7.8 x 300 mm), Pressure: 103 bar ZenixTM-C SEC-150 (3 µm, 150 Å, 7.8 x 300 mm), Pressure: 103 bar

Mobile phase: 0.1% Arginine:Acetonitrile:Acetic acid (65:20:15), Flow rate: 1 mL/min,Detector: UV 276 nm, Column temperature: 37 ℃ and 30 ℃, Injection volume: 10 µL, Sample: Insulin Lispro 3.47 mg/mL in phosphate containing m-cresol

ZenixTM-C SEC-80 provides a better resolution for insulin aggregate and monomer serparation.

min0 2 4 6 8 10 12 14 16

min6 7 8 9 10 11 12

ZenixTM-C SEC-80ZenixTM-C SEC-150

Zoom in

Rs = 3.28

Rs = 2.14

M-cresol

EE1004

Column size effect – Insulin Lispro

min2 4 6 8 10 12

Column: ZenixTM-C SEC-80 (3 µm, 80 Å, 4.6 x 300 mm), Flow rate: 0.35 mL/min, Injection volume: 5 µLZenixTM-C SEC-80 (3 µm, 80 Å, 7.8 x 300 mm), Flow rate: 1 mL/min, Injection volume: 10 µL

Mobile phase: 0.1% Arginine:Acetonitrile:Acetic acid (65:20:15)Detector: UV 276 nm, Column temperature: 30 ℃Sample: Insulin Lispro 3.47 mg/mL in phosphate buffer containing m-cresol

Rs = 2.79

Rs = 3.28

7.8 x 300 mm

4.6 x 300 mm

EE1004

Flow rate effect- insulin Lispro

Column: ZenixTM-C SEC-80 (3 µm, 80 Å, 7.8 x 300 mm) Mobile phase: 0.1% Arginine:Acetonitrile:Acetic acid (65:20:15), Flow rate: 0.5 and 1 mL/minDetector: UV 276 nm, Column temperature: 30 ℃, Injection volume: 10 µL, Sample: Insulin Lispro 3.47 mg/mL in phosphate containing m-cresol

min5 10 15 20 25 30 35

min4 6 8 10 12 14 16

0.5 mL/min

1 mL/min

Rs=3.84

Rs = 3.39

Slower flow rate gives slightly better resolution at the expense of analysis speed.

EE1004

Duplicate injections of insulin Lispro

Column: ZenixTM-C SEC-80 (3 µm, 80 Å, 7.8 x 300 mm) Mobile phase: 0.1% Arginine:Acetonitrile:Acetic acid (65:20:15), Flow rate: 1 mL/min, Pressure: 103 barDetector: UV 276 nm, Column temperature: 30 ℃, Injection volume: 10 µLSample: Insulin Lispro 3.47 mg/mL in phosphate containing m-cresol

min0 2 4 6 8 10 12 14 16

Insulin

M-cresolHigh run to run reproducibility

EE1004

Degraded insulin on ZenixTM-C SEC-80

Column: ZenixTM-C SEC-80 (3 µm, 80 Å, 7.8 x 300 mm) Mobile phase: 0.1% TFA, 50% acetonitrile, Flow rate: 1 mL/min, Pressure: 75 barDetector: UV 276 nm, Column temperature: 30 ℃, Injection volume: 10 µL, Sample: Degraded insulin 3.75 mg/mL in phosphate buffer containing m-cresol (40 hours at 60 oC)

min4 5 6 7 8 9 10 11

min0 2 4 6 8 10 12 14 16

M-cresol

Insulin

EE1004

Insulin Analysis on ZenixTM-C SEC-80 ( 4630 )

Column: ZenixTM-C SEC-80 (3 µm, 80 Å, 4.6 x 300 mm) Mobile phase0.1% Arginine:Acetonitrile:Acetic acid (65:20:15), Flow rate: 0.35 mL/min,Detector: UV 276 nm, Column temperature: 30 ℃, Injection volume: 5 µL, Pressure: 90 bar,Sample: Insulin Lispro 3.47 mg/mL in phosphate buffer containing m-cresol, sigma insulin 3.8 mg/mL in 0.01 N HCl containing phenol and m-cresol

min0 2 4 6 8 10 12 14 16 18

1750m-cresol

phenolmin2 4 6 8 10 12

Zoom in

Lispro

EE1004

Column: ZenixTM-C SEC-80 ( 3 µm, 80 Å, 7.8 x 300 mm) Mobile phase: 0.1% Arginine : ACN : HAc = 65 : 20 : 15 ( v/v ), Flow rate: 0.5 mL/minDetector: UV 276 nm, Column temperature: 40 ℃, Injection volume: 25 µLSample: Insulin 4 mg/mL in 0.01 N HCl, Pressure: 52 bar

Life time testInsulin Analysis on ZenixTM-C SEC-80 ( 7830 )

min0 2.5 5 7.5 10 12.5 15 17.5 20 22.5

Injection 1Injection 50Injection 100Injection 150

Injection 200

Aggregate

Insulin monomer

EE1004

Insulin analysis parameters-life time test

injection RT Plates Tailing Rs Area% dimer

1 16.08 19767 0.79 4.32 3.37

50 16.13 20116 0.79 4.43 3.21

100 16.17 20327 0.8 4.44 3.18

150 16.22 21287 0.82 4.42 3.34

200 16.28 21629 0.83 4.44 3.15

RSD/% 0.48 3.86 2.25 1.16 3.04

EE1004

Insulin SEC Analysis - Sepax Technologies, Inc. · Insulin SEC analysis •Insulin Samples:...

Documents

Transcript of Insulin SEC Analysis - Sepax Technologies, Inc. · Insulin SEC analysis •Insulin Samples:...

Avoiding Medication Errors with Insulin Therapywith Insulin

DIABETES Body does not make or properly use insulin: – no insulin production – insufficient insulin production – resistance to insulin’s effects Insulin.

Development of Insulin Detemir/Insulin Aspart Cross ...Development of Insulin Detemir/Insulin Aspart Cross-Reacting Antibodies Following Treatment with Insulin Detemir: 104-week Study

Insulin What is insulin?. Insulin deu7-4E deu7-4E Insulin is responsible for regulating.

Insulin Dan Reseptor Insulin

Sepax™ Cell Separation System Sepax 2 S-100 · Sepax™ Cell Separation System Sepax 2 S-100 Product #14000 The Sepax 2 S-100 is a mobile, closed capability system that efficiently

SRT SEC-300 Rt (min) Hydrophilic nm thin films 表面 ......SEPAX社SECカラムSRTおよびZENIXシリーズはその優れた表面テクノロジーにより、 これらの問題を解決しています。SRT

Insulin Degludec, a Novel Ultra-Long-Acting Basal Insulin versus … · 2019-05-22 · Conclusions: Insulin degludec and insulin glargine provide similar glycemic control, but insulin

Clinical Review Insulin Degludec-Insulin Aspart Clinical Prea...Tania A. Condarco, M.D. November 4, 2016 Insulin degludec Insulin degludec/insulin aspart 70/30 Tresiba for insulin

Current Trends in Diagnosis and Management of Gestational ... · Which insulin to use in pregnancy? Regular insulin (U-100 and U-500), insulin aspart, insulin lispro, NPH and insulin

Premixed Insulin for Type 2 Diabetes> Premixed NPH/regular insulin is made by combining NPH and regular insulin. > Newer premixed insulin is the other type of premixed insulin. It

More Insulin - When There is Insulin Resistance

Cation Exchange Chromatography - Sepax Technologies Inc 1-877-SEPAX-US 2 Technical specifications of Proteomix® CEX and Antibodix™ WCX Phase Proteomix® SCX, WCX Antibodix™ WCX

RAR 37.5, RAR 50 for Raw Mills RAKM 30, RAKM 37.5 for Coal ...steeltechs.in/images/Sheet_1_brochure.pdf · Sepax separators, Sepax 375, Sepax 450 for Cement Mills RAR 37.5, RAR 50

THE BASAL INSULIN/BOLUS INSULIN CONCEPT

Insulin and Insulin Resistance

Insulin Detemir and Basal Insulin Therapy

ueda2013 basal insulin versus premixed insulin-d.salah

Caloric Restriction Reverses Hepatic Insulin … Restriction Reverses Hepatic Insulin Resistance and ... Hepatic Insulin Resistance and Steatosis in Rats ... impaired hepatic insulin

Tamara Spaic A fellow forever………….. Objectives What is insulin resistance/sensitivity ? Insulin Secretion How is insulin sensitivity related to insulin.

SRT SEC-300 Rt (min) Hydrophilic nm thin films 表面 ......SEPAX社SECカラムSRTおよびZENIXシリーズはその優れた表面テクノロジーにより、これらの問題を解決しています。SRT