Increasing ROI Through Simulation and the 'Digital Twin'

Post on 07-Jan-2017

42 views 1 download

Transcript of Increasing ROI Through Simulation and the 'Digital Twin'

Increasing ROI through Simulation and the 'Digital Twin'

2

Outline

• Beyond Training

• What would you do with a Digital Twin?

• Innovation to Maximize your Digital Twin

– Fossil ROI

– Nuclear ROI

3

Who is GSE Performance Solutions

History Plant Experience

4

Beyond Training

From Training – Plant Referenced Simulators – 10 CFR 55

• Respond Same as Plant/ Using Plant Procedures

To Deeper Insights

– Real-time, whole plant, dynamic model

… already have a “Digital Twin”

5

Digital Twin

10 CFR 55

ANSI/ANS 3.5-2009

RG 1.149 Rev 4

6

What Would You Do With a “Digital Twin”?

7

"There's a way to do it better—find it.“ - Thomas Edison

What Has Changed … Why Now?

• Cost Effective Computing Power

• Efficiency demands / “Deliver the Nuclear Promise”

• Deeper Insights Available With Flexible and Expandable Platform

– Engineering Grade Codes in the Simulator• RELAP (RELAP5-HD™)

– INL code used by utilities for safety analysis

• MAAP (DesignEP™ / PSA-HD™)– EPRI code used for Probabilistic Risk Assessment (PRA)

8

IIoT (Industrial Internet of Things)…Now

Big Data

Analytics

Digital Twin

Physical Plant

IIoT

Smart Components

9

IIoT (Industrial Internet of Things)…Future

Big Data

Analytics

Digital Twin

Physical Plant

Smart Components

10

Thermal Power ROI Examples

• Simulator Based Design … efficiency

• Virtual Commissioning … validation

Pumps and PipingTransmitter Location

DCS Control and Plant Trip Logic HMI / HSI

Eliminate Near Misses

Errors Detected – Time Saved – Cost Eliminated

11

Thermal Power ROI Examples

Post Commissioning DCS Code Transfer

12

Nuclear ROI Examples

• Simulator Based Design

Nuclear New Build – AP1000

Simulator Supervisor (AP1000)“Several hundred I&C issues have been identified in the non-safety and safety systems and fed back to OEM for correction in the AP1000 design.”

13

Nuclear ROI Examples

• Virtual Commissioning

Digital Turbine Control

Installed on Virtual Sim Turbine Control Upgrade Final Install on Simulator

HMI Verification Operator FamiliarizationProcedure Validation

Control Panel HFE Evaluation Plant Response

14

Nuclear ROI Examples

• Virtual Commissioning

Digital Feedwater Project

Simulator Engineering prior to FW Mod– Installed prior to DCS mod in plant to support training

– Conducted plant system testing using simulator

– Found several control scheme issues

– Allowed plant to delay install and avoiding an expensive extended outage

15

Your ROI Partner

GSE is your ROI PartnerLets get started with a “Digital Readiness Assessment”