1

IN THE NAME OF ALLAH THE MOST BENEFICENT THE MOST MERCIFUL

2

ECE 2161:INSTRUMENTATION & MEASUREMENTS

ORIENTATION LECTURE

Engr. Ijlal HaiderDept of . Electrical Engineering

University of Lahore, Lahore

3

INTRODUCTION

About Instructor Course Information Rules Introduction to the Subject

4

INSTRUCTOR

Engr. Ijlal Haider

Oct 2011 to DateLecturer (Electrical Engineering)UoL, Lahore

Nov 2010 Oct 2011 Lecturer (Electrical Engineering)APCOMS, Rawalpindi Jan 2008-Mar 2009 Electronic/Electrical EngineerNoorpur Industries, Karachi

MS NUST, Pakistan 2011 BE IUT, Bangladesh 2007

5

INSTRUCTOR Membership of Professional Bodies

International IEEE IET, UK ASEE, US ISA, US PMI, US IAENG

National PEC, PK IEP, PK Engineering Congress, PK

COURSE INFO Prerequisite

Basic Electrical & Electronic Engineering Electrical & Electronic Engineering Laboratory Electronics Circuits and Devices Signals & Systems

Tools required MATLAB LabVIEW Microcontrollers

6

COURSE INFO

Recommended Literature W.C. Dunn, 2005, Fundamentals of Industrial Instrumentation and Process

Control, 5th Edition, McGraw-Hill A. Morris, 2008, Measurement & Instrumentation Principles, (citation

required) J. Fraden, 2004, Handbook of Modern Sensors, Physics, Designs and

Applications, 3rd Edition, Springer-Verlag J. Park and S. Mackay, 2003, Elsevier Practical Data Acquisition for

Instrumentation & Control System, Newnes (and other relevant books from this series)

J.G. Webster, 1999, Measurement, Instrumentation and Sensors Handbook, 1st Edition, CRC Press

U.S. Department of Energy, 1992, DoE Fundamentals Handbook- Instrumentation and Control

Explore Internet (visit http://saba.kntu.ac.ir/eecd/taghirad/E%20books/Ebooks.html for

eBooks)

7

8

COURSE INFO

3 + 1 Credits Contact Hours: 3 (Lecture)+3(Tutorial/Lab)

Section Day Time Place

Lecture Monday 10:00 AM - 12:00 PM

LB 206

Tuesday 10:00 AM – 11:00 AM

LB 101

Lab Wednesday 08:00 AM – 11:00 AM

DSP Lab

9

RULES: ASSESSMENT

Type Description Marks

Exercises based on mathematical problemsAssignments based on study and design problemsQuizzes Periodic assessment (Best 3 will be considered out of 4)Project to be presented before mid-semester examCase Study to be presented before semester final examIndustrial Visit any outcome in the form of report, presentation or

lectureSeminar/Workshop

any outcome in the form of report, presentation or lecture

Class Performance In class assessmentMid Semester Exam assessment on first half of semester

Semester Final Exam

assessment on second half of semester + comprehensive

10

RULES There can be as many home tasks as

possible 4 quizzes

will be decided with mutual consensus preferably after every 4 weeks

Best 3 will be considered (there may be a slight change in policy)

11

RULES Quizzes will be scheduled according to

mutual convenience Exercises and assignments MUST be

submitted on time.. Late submissions will not be accepted

Quizzes and exam may or may not be open book

No plagiarism!! Do not compromise on your marks

12

RULES Home tasks must be submitted on A4 papers

covered by the Performa provided Quizzes must also be attempted on neat A4

pages in a legible handwriting (always keep a few A4 pages in your bag/folder)

Exams must be attempted in a legible handwriting and in a neat manner

DO NOT think of this course as a art course

however

13

CLASS CULTURE

Work in teams(2 people)

Have a friendly environment in class

Nobody will be failed unless he himself wants to..

14

CLASS CULTURE Mobile phones must not disturb the two way

communication Eating/drinking is allowed Avoid Noise (strict policy) Maintain decorum of the class No permission needed to enter and leave

class Do not take advantage of the freedom

15

CAUTION!!!

You need to work really HARD

16

PRACTICAL INFO

All material will be uploaded to internet Keep visiting www.ijlalhaider.pbworks.com Personal email: ijlal.haider@ee.uol.edu.pk Office Phone: (042) 35963421-8 Ext. 1415 Only CR’s can contact me on my cell no.

(strict policy, penalties on breach)

17

ADDITIONAL INFO For detailed policies, outcomes of the course

and outlines, see Course Info Sheet

18

TODAY’S TASK Form groups of two

Submit your names, email and cell numbers group wise

CR’s/ Head CR (Communication Channel)

19

SIMILAR OR DIFFERENT!!! Science Technology Engineering

INSTRUMENTATION The central goal of control engineering is the

design of a technically feasible way to act on a given process so that it behaves in a prescribed manner.

The desired behavior should be achieved as closely as possible in the presence of uncertainty in the process (modeling error) uncontrollable external disturbances acting on

the process (process and measurement noise).

20

IDEA OF FEEDBACK Compare actual behavior with desired

behavior Take corrective action based on the

difference Deceivingly simple idea, but very powerful

concept Feedback is a key idea in control

21

CONTROL SYSTEM

22

PROCESS CONTROL

23

OPEN LOOP SPEED CONTROL

24

CLOSED LOOP SPEED CONTROL

25

A MODERN INDUSTRIAL PLANT: A SECTION OF THE OMV OIL REFINERY IN AUSTRIA

27

FEEDBACKM. B Hoagland and B Dodson. The Way Life Works. Times Books, 1995

‘Feedback is a central feature of life. The process of feedback governs how we grow, respond to stress and challenge, and regulate factors such as body temperature, blood pressure, and cholesterol level. The mechanisms operate at every level, from the interaction of proteins in cells to the interaction of organisms in complex ecologies.’

28

29

OBJECTIVES OF MEASUREMENT Monitoring Control Analysis

30

FUNDAMENTAL ELEMENTS OF INSTRUMENTATION SYSTEMS Process Sensors Actuators Controllers Signal Conditioning Units Communication Units

31

THANK YOU!