Improving Walkability, And Pedestrian Safety And Convenience

Post on 09-May-2015

4.425 views 1 download

description

This is a presentation I prepared during my internship at Newark Housing Authority (NHA) for the research team of their project for making Newark neighborhoods more pedestrian-friendly.

Transcript of Improving Walkability, And Pedestrian Safety And Convenience

Improving Walkability, and Pedestrian Safety and

Convenience

Strategies and Plans to Make Urban Environment More Pedestrian-Friendly and

Bicyclist-Friendly

Arefeh A. NasriNewark Housing Authority

Summer 2008

2

Walkability

The extent to which the built environment is friendly to the presence of people living, shopping, visiting, enjoying or spending time in an area.

3

Effective Factors on Walkability

Land use mix Street Connectivity Residential density (residential units per area

of residential use) Transparency which includes amount of glass

in windows and doors, as well as orientation and proximity of homes and buildings to watch over the street

Plenty of places to go to near the majority of homes

Placemaking, street designs that work for people, not just cars and retail floor area ratio

4

Benefits of Walking and Cycling

Transportation system benefits Environmental benefits Economic benefits Quality of life benefits Health benefits

5

Transportation System Benefits

Nearly half of all travel trips taken in the US are 3 miles or less in length; 28% are less than 1 mile. By converting short automobile trips to bicycling and walking, communities can get benefits from healthier air and reduced traffic congestion.

The American public saves from 5 to 22 cents for every automobile mile displaced by walking and bicycling through reduced pollution, oil import costs, and costs from congestion such as lost wages and time on the job.

6

Environmental Benefits

Approximately 160 million tons of pollution are emitted into the air each year in the US. air pollution contributes to the deaths of 70,000 people each year.

Short auto trips produce far more pollution per mile than longer trips.

Increased levels of bicycling and walking can reduce air pollution.

7

Economic Benefits

Increase mobility for people who cannot afford to own and operate a car by improvement of walking and cycling (a motor vehicle is one of the highest expenses after housing)

reduce health care costs by incorporating physical activity of pedestrian and bicycle transportation into people’s daily lives

8

Economic Benefits

Outdoor activities such as bicycling and walking are the most popular activities for people on vacation from work.

Trails and greenways can have a positive effect on the value of nearby properties. Recent studies indicate that there is a demand for more livable communities and, specifically, better bicycle and pedestrian facilities in the vicinity.

9

Quality of Life Benefits

Pedestrians add to the ambience and security of streets.

Providing a livable community is a necessary part of attracting and keeping businesses, and ensuring local communities remain competitive.

10

Health Benefits

There is a correlation between the built environment and the amount of routine physical activity, such as regular walking trips.

Pedestrian and bicycle transportation offers more opportunities for people to socialize than driving alone in automobiles.

Studies have shown benefits from routine exercise each day. Bicycling or walking to the store, school, or work also provides a time-efficient way of daily physical exercise.

11

Health Benefits

There are now nearly twice as many overweight children and almost three times as many overweight adolescents as there were in 1980.

Obesity and overweight are linked to the nation’s number one killer-heart disease-and other chronic conditions. One reason for Americans’ sedentary lifestyle is that walking and cycling have been replaced by automobile travel for all but the shortest distances.

12

Public Support for Cycling & Walking

Of 82 million American ridden a bicycle in a year:

46% stated they would sometimes commute to work by bicycle if safe bicycle lanes were available.

53% would do so if they had safe, separate designated paths on which to ride.

45% would do so if their workplace had showers, lockers, and secure bicycle storage.

47% would do so if their employer offered financial or other incentives.

13

Pedestrian Characteristics

1) Age Groups:

Children (0-12) Teenagers (13-18) Adults (18-40) Middle-Aged Adults (41-65) Senior Adults (65+)

14

Safe Environment for Children and Elderly

15

Older pedestrians have difficulty negotiating curbs

16

People with children often walk at slower speeds

17

Pedestrian Characteristics

2) Impaired Pedestrians:

Visually impaired Hearing impaired Mobility impaired Mentally/emotionally impaired Elderly with reduced abilities

18

Designing for All Pedestrians

When age or functional disabilities reduce a person’s mobility, sight, or hearing, a good design becomes very important.

19

Driveway slopes should not encroach into the sidewalk

20

Curb Cuts and Wheelchair Ramps

The ramps should be flared smooth into the street surface. Ramps should be checked periodically to make sure large gaps do not develop between the gutter and street surface. There is a need to remove accumulations of asphalt at the edge of the curb radius.

21

How to Encourage Walking and Cycling?

Better cycling and walking facilities Traffic calming of residential

neighborhood Restriction on motor vehicle use Traffic education Traffic regulation and enforcement

22

Better Cycling and Walking Facilities

Bike paths and lanes with exclusive rights of way, providing a connected , integrated, comprehensive bike route network

Wide, well-lit sidewalks with benches and plants

Clearly marked, well-lit crosswalks, often raised and with curb extensions and pedestrian-activated traffic signals

Car-free zones and special bicycling streets

23

Traffic Calming of Residential Neighborhood

Traffic calming is a way to minimize the negative impacts of traffic to improve safety (decrease fatality rate).

A wide range of measures are used to reduce the severity and number of accidents to improve safety for all road users, esp. pedestrians, and to influence driver behaviour. Traffic calming can be accomplished by installing road humps, speed cushions, raised junction plateaux, chicanes, road narrowing, and mini-roundabouts.

A variety of traffic calming techniques is intended to reduce vehicle speeds, and to discourage drivers from cutting through residential side roads.

24

Effects of Vehicle Speed on Safety

25

Traffic Calming Techniques

Physical measures that force cars to slow down:

Table/entry treatment Road narrowing and zigzag routing Speed humps and bumps Traffic circles

26

Table/Entry Treatment

More acceptable to emergency services and bus operators than standard humps

Slows down all approaching traffic to all arms

Can be used in isolation (they don’t have to form part of a series of road humps)

Reduces speed

27

Road Narrowing

Interrupt through traffic movement thereby reducing speed

Do not delay emergency service vehicles or affect bus operation

Cycle gaps can be incorporated

If cycle gap is not provided they can make safer crossing places for pedestrians

28

Round Top Hump

Reasonably inexpensive to install

Minimal disruption to traffic during construction & no loss of on-street parking

Effective at reducing vehicle speeds

29

Speed Cushions (Pillow Hump)

Accepted by emergency services and bus operators

Inexpensive to construct

No loss of on-street parking

Cyclists can pass between cushions

30

Traffic Education

Improved motorists training, with emphasize on how to avoid endangering pedestrians and cyclists

Compulsory traffic safety lessons for all school children by the age of 10, with testing by traffic police on actual traffic test courses, to ensure safe and defensive walking and cycling by an early age

31

Urban Design Issues

The residential units should be within easy walking or cycling distance of cultural facilities, shopping, and service establishments.

It is desirable to have paved sidewalks on both sides of all streets in urban and suburban areas to provide mobility for pedestrians.

32

Many developments focus on vehicle access without regard to pedestrian

access

33

Medians and crosswalks should be placed at

destination locations

34

Pedestrian-Friendly Environment

Getting people out of cars

Public transportation improvement Car-free zones in residential areas

35

36

37

Pedestrian-Friendly Environment

Pedestrian Safety

Crosswalks can be used in combination with other treatments to improve safety.

Refuge islands, raised medians, raised crossings, curb extensions, and lighting are examples.

38

Pedestrian-Friendly Environment

There are severalfacilities to improvepedestrian safety

andability to cross theStreet under variousconditions.

Pedestrian safety

39

Intersection Issues for Pedestrians Safety

1) Improved pedestrian conspicuity Painted crosswalks in the roadway Extensions to move pedestrians out from

behind parked cars Improved horizontal and vertical sight

distances through the removal of extraneous curbside clutter

40

Intersection Issues for Pedestrians Safety

2) Speed reduction of motor vehicle drivers Raised intersections to alert drivers that the area is

not designed for rapid through movement and pedestrians can be expected

Right-turn slip lanes with exit angles between 50 and 60 degrees

3) Ease of movement from walkway to street level

Curb ramps to facilitate the transition from walkways to streets.

Raised intersections that eliminate the need for curb ramps and make the crosswalk a natural extension of the walkway

41

Intersection Issues for Pedestrians Safety

4) Predictability and control of pedestrian actions and movement

Crosswalks Signalization

5) Distance and time that pedestrians have to cross a roadway

Curb extensions Medians Refuge islands

42

Making the Intersection Pedestrian-Friendly by Using Colored Crosswalks and

Median Refuges

43

Raised Medians or Crossing Islands

44

Median and Curb Extensions

45

Traffic Signals (with Pedestrian Signal)

46

Reducing Crossing Distance

47

Curb Extensions to Improve the Pedestrians Safety

Before

After

48

Safer Intersections

49

Narrower Widths and Access Management

50

Pedestrian Warning Signs

Crosswalk sign & reflectors for crosswalk

Warning sign for pedestrians

51

Narrow Streets to Achieve Desired Speeds

52

Curb Ramps at Marked Crossings

53

Curb Ramps at Marked Crossings

54

Conclusion

A comprehensive program for increasing bicyclists and pedestrians safety must combine the efforts of many people.

it is important to first determine current conditions before going through planning.

Implementing various strategies to reduce incentive for driving and disincentive for walking and cycling would be a good approach.

55

Reduce Disincentives for Bicycling & Walking and Incentives for Driving

Strategy 1: Add non-motorized options to agency motor pools

Strategy 2: Require companies and agencies to produce balanced transportation plans for their workforce’s commuting needs

Strategy 3: Include entry-level bicycling and walking activities in local recreational programming

56

Reduce Disincentives for Bicycling & Walking and Incentives for Driving

Strategy 4: Promote utilitarian non-motorized transportation through introductory fun events

Strategy 5: Offer key target audiences detailed information on utilitarian non-motorized travel

Strategy 6: Develop and disseminate a limited set of simple, but important, probicycling and prowalking messages