Post on 20-Apr-2020
IHC IQIP tools Peljesac bridge project
Creating safety awareness together
2
Take a minute to talk about safety, because an incident can be life changing
Peljesac bridge project
3
General information
Pile details
- Pile details: 1800 mm OD and 2000 mm OD
- Pile weight: up to 250 T
- Pile length: 36 - 124 m
Below an overview is given of IHC IQIP tools which could be
suitable for the pile handling;
The exact suitability needs further discussion
Peljesac bridge project
4
Internal Lifting Tool
- Fail safe upending and lifting of the piles
- Inside of the piles should be free of obstacles (steel plates etc.)
- Also available for rental
Peljesac bridge project
5
Internal Lifting Tool
Peljesac bridge project
6
Internal Lifting Tool
Peljesac bridge project
7
Internal Lifting Tool with plug
- Simultaneously upending and sealing
- Suitable for upending or transportation
- Inside of the piles should be free of obstacles (steel plates etc.)
- ILT available for rental, plug only for sale
Peljesac bridge project
8
Internal Lifting Tool with plug
Peljesac bridge project
9
External Lifting Tool
- The ELT can be used for pile upending, pile lifting and as a
hang off clamp
- Wedge operated and fail safe principle
- Only available for sale
Peljesac bridge project
10
External Lifting Tool
Peljesac bridge project
11
External Lifting Tool
Peljesac bridge project
12
Pile plug
- One upper and one lower plug
- Towing directly on plug
- Safety factor shocks = 2
- Only available for sale
Peljesac bridge project
13
Pile plug
Peljesac bridge project
14
Pile plug