Post on 14-Apr-2022
IBM Power Systems Scale-Up Technical SalesIBM C1000-031
Version Demo
Total Demo Questions: 10
Total Premium Questions: 101
Buy Premium PDF
https://dumpsboss.com
support@dumpsboss.com
DumpsBoss - Pass Your Next Certification Exam Fast!dumpsboss.com
QUESTION NO: 1
An IBM Power System E980 customer is allocating six processor cores to a shared processor pool where they intend to create four partitions as defined below: An IBM i partition with 1.75 processing units and 2 virtual processors – uncapped
An IBM i partition with .60 processing units and 1 virtual processor – uncapped
An IBM i partition with .40 processing units and 1 virtual processor – uncapped
A VIOS partition with 1.25 processing units and 2 virtual processors – uncapped
How many IBM i licenses are required to support this configuration?
A. 2.75
B. 6.0
C. 4.0
D. 2.0
ANSWER: D
Explanation:
QUESTION NO: 2
A customer is comparing a Power Systems solution with an x86 solution for big data analytics.
Which no-charge IBM analysis is available to justify the value of IBM Power Servers compared to x86 solutions?
A. IT Economics Study (Eagle Study)
B. Performance Navigator
C. System Planning Tool
D. Workload Estimator
ANSWER: D
Explanation:
The IBM Systems Workload Estimator is a web-based sizing tool for IBM Power Systems, System i, System p, System x, IBM Flex Systems, and IBM PureFlex Systems. You can use this tool to size a new system, to size an upgrade to an existing system, or to size a consolidation of several systems. The Workload Estimator (WLE) allows measurement input to best reflect your current workload and provides a variety of built-in workloads to reflect your emerging application requirements. Virtualization can be used to yield a more robust solution. The Workload Estimator will provide current and growth recommendations for processor, memory, and disk that satisfy the overall client performance requirements
Reference: https://www.ibm.com/developerworks/community/blogs/systemssupport/entry/ibm_systems_workload_estimator_and_energy_estimator2?lang=en
QUESTION NO: 3
DumpsBoss - Pass Your Next Certification Exam Fast!dumpsboss.com
What is the minimum memory capacity of a Power System E980?
A. 32TB
B. 64TB
C. 128TB
D. 192TB
ANSWER: B
Explanation:
QUESTION NO: 4
A customer has a mission-critical IBM i application running on a POWER9 processor-based server that requires eight processor licenses. For High Availability, a POWER9 CBU server is synchronized with the production server using PowerHA for IBM i.
What is the minimum number of IBM i processor licenses required on the CBU server?
A. 2
B. 4
C. 1
D. 8
ANSWER: C
Explanation:
QUESTION NO: 5
Which of the following is a benefit of Power Enterprise Pools?
A. Has no restrictions on where or how long cores and memory can be relocated.
B. Provides automatic load balancing based on built in policies enabled in PowerVM.
C. Can use a Scale-out system temporarily in certain conditions.
D. Provides flexibility to manage both core and memory resources across multiple servers.
ANSWER: D
Explanation:
Reference: https://www.ibm.com/support/knowledgecenter/TI0003N/p8ha2/systempool_cod.htm
QUESTION NO: 6
DumpsBoss - Pass Your Next Certification Exam Fast!dumpsboss.com
What is L4 cache?
A. Off-processor-chip buffering to provide faster main memory access in enterprise servers.
B. Allows for Active Memory Expansion of the main memory in enterprise servers
C. On-processor-chip buffering of GPU results
D. On-processor-chip buffering between L3 and POWER9 processor cores
ANSWER: D
Explanation:
Reference: https://superuser.com/questions/1073937/what-does-l4-cache-hold-on-some-cpus
QUESTION NO: 7
Which of the following needs to be taken into consideration when designing an IBM Power System E980 solution?
A. Each system node has eight PCI full-size Gen3 slots which are a mix of x8 and x16 PCIe slots.
B. A DVD drive must be included in either the system control unit or in a system node.
C. Redundant SAS controllers in each system node manage all six system node SAS bays.
D. Only low profile PCIe adapters are supported in the system node.
ANSWER: A
Explanation:
Reference: https://www-01.ibm.com/common/ssi/cgi-bin/ssialias?infotype=AN&subtype=CA&htmlfid=877/ENUSZG18-0086&appname=lenovospain&language=es
QUESTION NO: 8
Which of the following can be a consequence of running in Maximum Performance mode?
A. Increased acoustic noise
B. Decreased I/O latency
C. Increased memory frequency
D. Decreased power draw
ANSWER: B
Explanation:
QUESTION NO: 9
A customer has a 40 core Power System E980 and would like to use Mobile Capacity on Demand.
DumpsBoss - Pass Your Next Certification Exam Fast!dumpsboss.com
What is the minimum of static processor activations that are required?
A. 10
B. 12
C. 20
D. 8
ANSWER: D
Explanation:
Reference: https://www-01.ibm.com/common/ssi/cgi-bin/ssialias?htmlfid=899/ENUSLG18-0083&infotype=AN&subtype=CA
QUESTION NO: 10
An IBM Business Partner is installing two systems in two locations for a Disaster Recovery (DR) solution.
Which of the following is the most efficient way to set up production systems for DR of the LPARs operating system disks?
A. Boot OS from internal disks using NPIV.
B. Boot VIOS from SAN and LPAR OS boot from internal disks using NPIV.
C. Boot LPAR OS from internal disks using vSCSI.
D. Boot LPARs from SAN using NPIV.
ANSWER: B
Explanation: