© Copyright 2012 Hewlett-Packard Development Company, L.P. The information contained herein is subject to change without notice.

HP WallArt SuiteJDF Workflow Integration

December 2015

HP WallArt Team

© Copyright 2012 Hewlett-Packard Development Company, L.P. The information contained herein is subject to change without notice.

Enabling JDF in HP WallArtBasic Concept

© Copyright 2012 Hewlett-Packard Development Company, L.P. The information contained herein is subject to change without notice.3

JDF/RIP’s Automation

More efficiency on your workflow

AUTOMATIC PROCESS

How can it accelerate the process?

1 Sends ready-to-print files directly from yourweb2print

2 RIP automatically downloads your files, without manual interaction

HP WallArt Web2Print File Ripping Printing

© Copyright 2012 Hewlett-Packard Development Company, L.P. The information contained herein is subject to change without notice.

Enabling JDF in HP WallArtHow it works

© Copyright 2012 Hewlett-Packard Development Company, L.P. The information contained herein is subject to change without notice.5

Enter Workflow Integration settings

Click on Settings Click on System Configuration1 2

© Copyright 2012 Hewlett-Packard Development Company, L.P. The information contained herein is subject to change without notice.6

Configure JDF Connection settings

Scroll down to Workflow Integration. There you will find the JDF Integration options.

Note this personalized URL. You will need it in further steps to configure your RIP.

3

© Copyright 2012 Hewlett-Packard Development Company, L.P. The information contained herein is subject to change without notice.7

Configure JDF Connection settings

Click to check the “Enable JDF connectivity”, and ensure that “Enable JDF authentication” is also checked.

Configure any additional options, if needed.

4

© Copyright 2012 Hewlett-Packard Development Company, L.P. The information contained herein is subject to change without notice.8

Configure JDF Connection settings

Remember to save any changes clicking the Savebutton.

In the next steps, you will setup your RIP.

5

© Copyright 2012 Hewlett-Packard Development Company, L.P. The information contained herein is subject to change without notice.

HP WallArt Set up inOnly for Caldera Version 10

© Copyright 2012 Hewlett-Packard Development Company, L.P. The information contained herein is subject to change without notice.10

Set up HP WallArt in Caldera RIPOnly for Caldera Version 10

Note: You need to have a Bridge-enabled key license. Configure CALDERA Bridge in order to use HP

WallArt in CALDERA RIP in Special > Bridge Configuration Menu1

© Copyright 2012 Hewlett-Packard Development Company, L.P. The information contained herein is subject to change without notice.11

Set up HP WallArt in Caldera RIPOnly for Caldera Version 10

Create a new configuration module2

© Copyright 2012 Hewlett-Packard Development Company, L.P. The information contained herein is subject to change without notice.12

Set up HP WallArt in Caldera RIPOnly for Caldera Version 10

Select HP WallArt type3

© Copyright 2012 Hewlett-Packard Development Company, L.P. The information contained herein is subject to change without notice.13

Set up HP WallArt in Caldera RIPOnly for Caldera Version 10

Fill in the required fields4

© Copyright 2012 Hewlett-Packard Development Company, L.P. The information contained herein is subject to change without notice.14

Set up HP WallArt in Caldera RIPOnly for Caldera Version 10

Bridge Module Configuration set ups4

Disable “Hold incoming jobs” if you want to open the images in Caldera automatically. With this option set on you will have to use the “Open in RIP” button in JobTracker

When “Job types” is disabled, no filtering is applied, which will load jobs of all types

© Copyright 2012 Hewlett-Packard Development Company, L.P. The information contained herein is subject to change without notice.15

Set up HP WallArt in Caldera RIPOnly for Caldera Version 10

Confirm with OK button5

© Copyright 2012 Hewlett-Packard Development Company, L.P. The information contained herein is subject to change without notice.16

Set up HP WallArt in Caldera RIPOnly for Caldera Version 10

Activate the module with Apply button6

It should read "Active" for the HP WallArt module. Other messages are "Authentication denied" or "JDF Link problem". If any of those appear, check the configuration (repeat the steps above)

© Copyright 2012 Hewlett-Packard Development Company, L.P. The information contained herein is subject to change without notice.17

Set up HP WallArt in Caldera RIPOnly for Caldera Version 10

Restart Caldera V10 interface. There should be an icon with the same name as the new configuration module. That opens the Job Tracker

7

© Copyright 2012 Hewlett-Packard Development Company, L.P. The information contained herein is subject to change without notice.18

Set up HP WallArt in Caldera RIPOnly for Caldera Version 10

In Job Tracker, hit the refresh icon on top-right corner. That will retrieve any waiting HP WallArt job.

8

© Copyright 2012 Hewlett-Packard Development Company, L.P. The information contained herein is subject to change without notice.19

Set up HP WallArt in Caldera RIPOnly for Caldera Version 10

Select the job/jobs you want to download and click the blue button.9

© Copyright 2012 Hewlett-Packard Development Company, L.P. The information contained herein is subject to change without notice.20

Set up HP WallArt in Caldera RIPOnly for Caldera Version 10

The jobs will be downloaded to the RIP in the images area to be processed10

© Copyright 2012 Hewlett-Packard Development Company, L.P. The information contained herein is subject to change without notice.21

Set up HP WallArt in Caldera RIPOnly for Caldera Version 10

The HP WallArt jobs could be sent directly to a created Workflow by selecting the “Send to” option

11

© Copyright 2012 Hewlett-Packard Development Company, L.P. The information contained herein is subject to change without notice.

Thank you