By Willy-SHS

First, create the root prim which is also the seat of the car. Give it specific sizes X=1 Y=1 Z=0.25

Go to texture tab, change the texture to blank and color it black.

Then go to Content tab, click on the “New Script” button, paste the car script in and press save. Also copy the sound of a car starting and running into the content folder and rename them to car_run & car_start.Script can be found at http://www.heatonresearch.com/stories/simple-cars-second-life.html

Basically, you can “ride” your seat now but it will fall over.

Now rezz another tube and give a definite size (X=3,Y=1,Z=0.25)

Give the tube a blank texture and color it red

Now copy the tube by holding the Shift button, clicking the blue arrow and pulling it up

By setting the Hollow value to 95, you just made the side of the car

Now pull the seat up and adjust the size of those prim so it looks better

Link all the parts together, remember to select the seat at last so it can be the root prim. Press Ctrl+L

Now, make a tire by rezzing a cylinder and fit it to the car. Remember to choose Glass as the material of the tire (Yes, it’s glass). Make 3 other copies and adjust to it fit in the car and link them together.

Now, enjoy your car!!!