Post on 15-Mar-2021
1
High Pressure Foot Operated Grease Pump FOP-10
Congratulations on purchase of this World Class High Pressure Foot Operated Pump !
• HighPressurePortableGreasePumpforquickeffortlessgreasingineverydaylubricationsuchasgreasingofexcavators&otherearthmovingequipment,automotive&agriculturalequipmentetc.
• Handsfreeoperation;pumpoperatesusingtheFootLever,whichgreatlyreduceseffort&allowshighpressuregreasingwithhighestcomfort
• Canbeoperatedbyhandwhenunderlowmachinery
• Economical,pumpisoperatedbyasingleperson&useslowcostbulkgrease
• Designedwithallmovingpartssubmergedinthesamegreasewhichneedstobepumped,therebystayinglubricatedatalltimes
• Movingpartscreatewaveactioningrease,autoremovingairpockets&eliminatingtheuseofaFollowerplate
Lifthandle
Rubberpads
NozzleHolder
FootLever
SteelDrumCover
PistolhandlefittedwithSteelExtension
&professionalcoupler
HighPressureRubberhosePumpBucket
PARTS DESCRIPTION
REFERENCE NUMBER DESCRIPTION QUANTITY
1 PumpBucket 1
2 HighPressureRubberHose 1
3 PistolHandlewithSteelExtension&ProfessionalCoupler 1
4 SteelDrumCover 1
5 PistolHandle 1
INSTRUCTIONMANUAL S1840,RevC
2
Thepumphasaspringloadedwaveactionmechanisminstalledatthebottomofthebucket.
WORKING OF PUMP
Subsequentstrokesofthefootleverfillthedeliveryhose&dis-chargebeginsfromthepistolhandle.
Pressingthefootlevermakesacylindertomoveforwardleav-ingemptyspacebehindit.Thegreaseduetoitsweightfillsthisemptyspace.
Onreleasingthefootlever,thecylinderreturnstoitsoriginalpositionpushingtheaccumulat-edgreaseintoahollowpistonthatthrowsthegreasefromthepumpoutletintodeliveryhose.
Cylinder in open position
Cylinder in closed positionHollow Piston
Spring Loaded Mechanism
OPERATION & USE
1. Fillcorrectgradegreaseintothepumpbucket.
2. Tampthebucketonafirmsurfacetopushthegreasetodisplaceairpocketstrappedinthecavitiesinthebaseofthebucket.
3. Operatethepumpbypressingthefootleverafewtimesuntildeliverycommences.
4. Nowthepumpisreadyfordispensing.Whennotinuse,thepistolhandlecanbeputintothenozzleholderprovidedatthesideofthefootlever.
PRIMING THE PUMP
Primingisgettingthepumpstartedbyoperatingfootleverfor3-4minutesuntilgreasegetsdispensedfromthethepistolhandle.
AlwaysPRIMEthepumpwhenusingitfortheFIRSTtime.
When working in cold weather or using a thicker grease, keep grease thin for easy workability in one of the following ways:
• Mix some oil (SAE30) with grease. Shake the bucket & press the mixture thoroughly to remove any air pockets
• Heat grease bucket with a Barrel Warmer or Heating Jacket. The temperature should be kept at 0 - 30°C (32 - 86°F)
PUMP DISASSEMBLY & REASSEMBLY
• Steel Ball (8) must rest evenly on its seat over Non
Return Body (7). Also, Steel Ball (8) must rest on
the narrower edge of Plunger Spring (9) otherwise
the ball will fall into the spring causing pump
failure.
• Always lubricate O-rings and seals with grease
before fitting. They must be protected from sharp
edges when being fitted. Lubricate all moving parts
with grease.
• When troubleshooting, be on a lookout for dirt
in valves / ball seats, damaged O-ring / seal &
scratches in sealing surfaces.
• Apply thread sealant to ensure leak-proof operation.
1. UnscrewGreaseHose(20)fromHolderAssembly(15).
2. RemovefourBolts(3)&removeRestPad(2).
3. Opendrumcover&removefourNylocNuts(18).Remove
bothExtensionSprings(1)usingaspringpullar.
4. RemoveHolderAssembly(15)&itsRubberSeal(19).Pull
outPiston(12)fromtheassembly.RemoveGrubScrew
(16)fromHolderAssembly(15)toremovePistonSpring
(14)&SteelBall(13).
5. RemovePlunger&BracketAssembly(4)fromgrease
bucket.RemoveCotterPin(5)toseparatePlunger&
BracketAssembly(4)fromPusherBracket(17).Unscrew
NonReturnBody(7)toremoveSteelBall(8)&Plunger
Spring(9).
6. Assemblebyfollowingthesteps1-5inreverseordertaking
particularcareofthepointsgivenbelow:
(Refer to Parts Drawing)
Whilefillinggreaseforthefirsttime:
• Doensurethatgreaseiswellsettleddown.
• Usesteelplateorpressgreasebyhand(useplasticglovesandthenliftandtapthebucketontheground5to6timestoallowthegreasetosettleanddriveoutbigairpockets).
3
PARTS DRAWING
1
7 8 910 11
18
19
16
15
1413
12
2
3
4
5
6
20
21
22
23
17
4
PARTS LIST FOR PUMP ASSEMBLY
REFERENCE NO. FROM PARTS DRAWING
PART DESCRIPTION QUANTITY
1 ExtensionSpring 2
2 RestPad 1
3 Bolt(M8X1.25) 4
4 Plunger&BracketAssembly 1
5 CotterPin 1
6 BucketAssembly 1
7 NonReturnBody 1
8 SteelBall(7/16”) 1
9 PlungerSpring 1
10 ORing 1
11 Stopper 1
12 Piston 1
13 SteelBall(9/32”) 1
14 PistonSpring 1
15 HolderAssembly 1
16 GrubScrew 1
17 PusherBracket 1
18 NylocNut 4
19 RubberSeal 1
20 GreaseHose1/4”I.D 1
21 HoseHandle 1
22 GreaseBendPipe 1
23 HydraulicCoupler 1
5
SERVICE PARTS PROGRAM
KIT PART NO. KIT DESCRIPTION CONSTITUENT PART NO.
PART DESCRIPTION REF. NO. FROM PARTS DRAWING
QUANTITY PER KIT
KIT/FOP/MPK MAINPISTONKIT
SPR/EXT/FOP ExtensionSpring 1 2
SA/PGR/BKT/FOP Plunger&BracketAssembly 4 1
CTP/FOP CotterPin 5 1
BDY/NR/FOP NonReturnBody 7 1
SB/7-16 SteelBall(7/16”) 8 1
SPR/PGR/FOP PlungerSpring 9 1
ORG/BS617 ORing 10 1
STP/FOP Stopper 11 1
PST/FOP Piston 12 1
SB/9-32 SteelBall(9/32”) 13 1
SPR/PST/FOP PistonSpring 14 1
SA/ADP/HLD/FOP HolderAssembly 15 1
GBS/FOP GrubScrew 16 1
KIT/FOP/HAK HOSEASSEMBLYKIT
GHC/2/FOP/B GreaseHose1/4”I.D 20 1
HND/HOS/VGP10A HoseHandle 21 1
GBP/6/B GreaseBendPipe 22 1
HC/15-3 HydraulicCoupler 23 1
6
WETTED COMPONENTSSteel,NitrileRubber
RECOMMENDED USEWithNLGI1&2Greases
PRECAUTIONS
• Keepworkareacleanandremoveanyexcessgreasefromtools,handsandclothingafteruse.
• Theusermayneedtowarmgreaseincoldweather.NEVERoverheatgreaseasitmayloseitslubricatingproperties.
Discharge Rate Upto2gmperstroke(1oz.per14strokes)
Pump Mechanism FootOperated
Delivery Pressure 8700PSI(600BAR)
Bucket Capacity 10Kg(22lb)
Delivery Hose 2mX1/4”I.D
Delivery Nozzle PistolHandle
SPECIFICATIONS
Groz Engineering Tools (P) Ltd.Groz Net Industries
VillageKherkiDaula,NationalHighway-8Gurgaon-122001,Haryana,INDIATEL+91.124.282.7700/221.4050FAX+91.124.2827986/221.4224FAX(USA)+1.509.271.7848FAX(UK)+44.870.121.1854
E-MAILinfo@groz-tools.comURLwww.groz-tools.com
TheGrozname,GrozlogoandthemarkaretrademarksofGrozEngineeringTools(P)Ltd.India