Post on 11-Aug-2020
The HKPF-105 is an HD A/V multiplexer board to combine AES/EBUdigital audio signal with HD SDI signal. The HKPF-106 is an HD A/Vdemultiplexer board to split AES/EBU digital audio signal from HD SDI.
Both of them provide an uncompressed, 10-bit, digital componentSMPTE-292M HD serial data stream with a bit rate of 1.5 Gbps.Both is supported by ISR system for diagnosis and error monitoring.The HKPF-105 and HKPF-106 are designed to be accommodated inthe PFV-HD300/HD50A HD digital interface unit. Power foroperation of these two boards is supplied from the interface unit.
The HKPF-105 and HKPF-106 structure and power supply voltageare the same as those of all other boards designed for use in thePFV-HD300 and PFV-HD50A Digital Interface Unit. These boardsmay be installed in either interface unit in any combination and usedsimultaneously, allowing a highly flexible system.
High Definition A/V Multiplexer/Demultiplexer Boards
D i g i t a lP r o c e s s i n gE q u i p m e n t
HKPF-106
HKPF-105
HKPF-105/106
HKPF-105/106High Definition A/V Multiplexer/Demultiplexer Boards
HKPF-106 High Definition A/V Demultiplexer Board
• Four channels of digital AES/EBU audio can be de-multiplexed into one HD SDI signal. With an additionalof another HKPF-106 board up to eight channels ofdigital AES/EBU audio can be de-multiplexed by useof the Cascade connection.
• BNC connector for HD SDI with embedded digitalaudio input, two BNCs for HD SDI video output , andtwo BNCs for two pairs of AES/EBU (4-channel audio)outputs.
• Grouped audio outputs of 1 to 4-CH or 5 to 8-CHselectable.
• Channel pair for audio output interchangeable—1/2-CH, 3/4-CH or 5/6-CH, 7/8-CH.
• Auto equalizing function enables HD SDI transmissionup to 100 m through a single coaxial cable (5C-FB orPD-3079 COOPER RG-6/U).
• Automatic detection of field frequency (59.94 or 60.00Hz).
• Automatic detection of Active line (1080 or 1035).• Support of ISR (Interactive Status Reporting).
FeaturesHKPF-105 High Definition A/V Multiplexer Board• Four channels of digital audio can be multiplexed into
one HD SDI signal. With an additional of anotherHKPF-105 board up to eight channels of digitalAES/SBU audio can multiplex by use of the Cascadeconnection.
• BNC connector for HD SDI input, two BNCs for twopairs of AES/EBU (4-channel audio) inputs, and twoBNCs for HD SDI outputs.
• Two HD SDI with embedded audio outputs areprovided for additional signal distribution.
• Audio delay range variable from 0 to 157 sample +offset (0 , 1600 sample) against video signal.
• Auto equalizing function enables HD SDI transmissionup to 100 m through a single coaxial cable (5C-FB orPD-3079 COOPER RG-6/U).
• Automatic detection of field frequency (59.94 or 60.00Hz).
• Automatic detection of Active line (1080 or 1035). • Support of ISR (Interactive Status Reporting) function.
HD SDI INPUTHD SDI WITHEMBEDDEDDIGITAL AUDIOOUTPUT
V+A
AES/EBU DIGITAL AUDIOINPUT (1/2Ch)
AES/EBU DIGITAL AUDIOINPUT (3/4Ch)
1
2
HD SDI WITH EMBEDDEDDIGITAL AUDIOINPUT
AVDMPX
AES/EBU DIGITAL AUDIOOUTPUT (1/2Ch or 3/4Ch)
AES/EBU DIGITAL AUDIOOUTPUT (3/4Ch or 1/2Ch)
1
2
HD SDI OUTPUTWITH EMBEDDED DIGITAL AUDIO
HKPF-105 Diagram
HKPF-106 Diagram
Up to 4 function boards
ISR System
PFV-HD300 (7RU)
PFV-HD50A (3RU)
HKPF-Series boards (HDTV) or
BKPF-Series boards (SDTV)
Up to 14 function boards*
*Up to 10 function boards when using HKPF-525
System Configuration
HD serial digital interface signal with audio siginals multiplexed
Audio group 1 CH3/CH4
Audio group 1 CH1/CH2
Audio group 2 CH7/CH8
Audio group 2 CH5/CH6
AES/EBU IN 1
HD SDI IN
AES/EBU IN 2
HD SDI OUT 1
HD SDI OUT 2DIF-58A
DIF-58A
AES/EBU IN 1
HD SDI IN
AES/EBU IN 2
HD SDI OUT 1
HD SDI OUT 2
HKPF-106
HKPF-106
DPR-96A
S1-7: Channels 1to4
DPR-96A
S1-7: Channels 5to8
D i g i t a lP r o c e s s i n gE q u i p m e n t
System Examples (Cascade Connection)
HKPF-105 HKPF-106
Specifications
GeneralPower requirement +5 VDC:1.5 A, -5 VDC:0.39 A
(supplied from the PFV- HD300/HD50A)Power consumption Approx.9.5WOperating temperature 5°C to 40°C (41°F to 104°F)Dimensions Board: 194 (H) X 310 (D) mm
(7 3/4 X 12 1/4 inches)Connector Panel:218 (H) X 98 (D) X 25 (W) mm
(8 5/8 X 3 8/7 X 1 inches)Mass Board: Approx.600 g (1 lb 5 oz)
Connector Panel:Approx.200 g (7 oz)
Input SignalsDigital input DIGITAL IN connectors (BNC type) (1)
HD serial digital signalSMPTE 291M / 292M / 299M
Input impedance 7 Ω, unbalancedInput return loss 15 dB or more (5 MHz to 742.5 MHz)
10 dB or more (742.5 MHz to 1.485 GHz)Transmission loss 20 dB or lessTransmission distance max.100 mData rate 1.4835 Gbps (59.94 Hz), 1.4850 Gbps (60.00 Hz)
Digital audio input DIGITAL IN AUDIO connectors (BNC type) (2)AES/EBU format
Input impedance 1 Vp-p, 75 Ω, unbalancedOutput SignalsDigital output DIGITAL OUT connectors (BNC type) (2)
HD serial digital video signalSMPTE 291M / 292M / 299M
Output level 800 mVp-p ±10 % (at 75 Ω load)Output impedance 75 Ω, unbalancedOutput return loss 15 dB or more (5 MHz to 742.5 MHz)
10 dB or more (742.5 MHz to 1.485 GHz)Jitter Timing jitter : 673 ps or less
Alignment jitter : 135 ps or lessData rate 1.4835 Gbps (59.94 Hz), 1.4850 Gbps (60.00 Hz)
Time delayVideo:1.5S (without lip sync)Audio:51 µS
Adjustable audio delay up to 157 samples + 1 frame (maximum 1757 samples)
Audio offset 0 or 1600 samples (1frame 1125 / 60)ISR output information
Status messages : 9 itemsSet up messages : 4 items
HKPF-105 High Definition A/V Multiplexer BoardGeneralPower requirement +5 V DC:1.5 A, -5 V DC:0.39 A
(supplied from the PFV- HD300/HD50A)Power consumption Approx.9.5 WOperating temperature 5°C to 40°C (41°F to 104°F)Dimensions Board: 194(H) X 310(D)mm
(7 3/4 X 12 1/4 inches)Connector Panel: 218(H) X 98(D) X 25(W)mm
(8 5/8 X 3 8/7 X 1 inches)Mass Board: Approx.600 g (1lb 5oz)
Connector Panel: Approx.200 g (7oz)Input SignalsDigital input DIGITAL IN connectors (BNC type) (1)
HD serial digital signalSMPTE 291M / 292M / 299M
Input impedance 75 Ω unbalancedInput return loss 15 dB or more (5 MHz to 742.5 MHz)
10 dB or more (742.5 MHz to 1.485 GHz)Transmission loss 20 dB or less (at 742.5 MHz)Transmission distance max.100 mData rate 1.4835 Gbps (59.94 Hz), 1.4850 Gbps (60.00 Hz)
Output SignalsDigital audio output DIGITAL IN AUDIO connectors (BNC type) (2)
AES/EBU formatInput impedance 1 Vp-p, 75 Ω, unbalancedDigital video out DIGITAL OUT connectors (BNC type) (2)
HD serial digital video signalSMPTE 291M / 292M / 299M
Output level 800 mVp-p ±10 % (at 75 Ω load)Output impedance 75 Ω, unbalancedOutput return loss 15 dB or more (5 MHz to 742.5 MHz)
10 dB or more (742.5 MHz to 1.485 GHz)Jitter Timing jitter : 673 ps or less
Alignment jitter : 135 ps or lessData rate 1.4835 Gbps (59.94 Hz) or 1.4850 Gbps (60.00 Hz)
Time delayVideo:1.5µS(without lip sync)Audio:51µS
ISR output informationStatus messages : 9 itemsSet up messages : 5 item
HKPF-106 High Definition A/V Demultiplexer Board
HD serial digital interface signal
Audio group 1 CH3/CH4
AES/EBU IN 1
HD SDI IN
AES/EBU IN 2
HD SDI OUT 1
HD SDI OUT 2DIF-58A
DIF-58A
AES/EBU IN 1
HD SDI IN
AES/EBU IN 2
HD SDI OUT 1
HD SDI OUT 2
Audio group 2 CH7/CH8
Audio group 2 CH5/CH6
HKPF-105
HKPF-105
DPR-96A
Audio group 1 CH1/CH2
S1-7: Channels 1to4
DPR-96A
S1-7: Channels 5to8
HD serial digital interface signal with data audio group 1 and 2 multiplexed
©1998 Sony Corporation. All rights reserved.Reproduction in whole or in part without the written permission of Sony is prohibited.Features and specifications subject to change without notice.All Sony product names are trademarks of Sony Corporation. All non-metric weights and measures are approximate.
Distributed by
Printed in Japan©1998 Sony CorporationMK7137/1TC-9804