Post on 21-Jan-2021
Engineered SolutionsEngineered SolutionsEngineered Solutions
Hi-TechHi-TechHi-Tech
®
OXYGEN
www.hitechgas.com
Oxygen (O2) Info
Molar Mass 32 g/molDensity 1.14 kg/dm3Covalent Radius 66 pmNumber of Electrons 16Vapor Pressure 1.52 mbarMelting Point 54.4 KBoiling Point 90.2 K
GENERATION SYSTEMS
THE EXPERIENCE THE PROCESS THE SCOPE OF SUPPLY
Typical Process Flow Diagram for Oxygen Generator
12
3
4
5
6
7
8
9
10
Air CompressorPre FilterAir DrierAir StorageOil AbsorberPneumatic Air Tank Oxygen GeneratorVent Silencer Buffer TankStorage tank
1
2
3
4
5
6
7
8
9
10
Nomenclature
The production of gases with aid of adsorptiontechnology is based on capability of porous adsorption agents to bind gases individual co-nstituents of gas mixture are adsorbed to diffe-ring degrees on very large surfaces of the ads-orbent agents. This effect is used within a PSAto continuously separate out one constituent.Zeolite Sieves are used as adsorption agentswhen producing oxygen from the air by adsor-ptive means they adsorb nitrogen, water vaporand carbon dioxide to a much higher degree than oxygen this means that a product ow co-mprising essentially only Oxygen and Argon can be removed from the process air being passed through the adsorption bed.
Hi-Tech Engineered Solutions, one of world’s leader in Installing and Manufacturing of Turnkey based PSA (Pressure Swing Absorption) Technology Plants, also offers Custom Engi-neered PSA Oxygen Systems that are desi-gned to Specic Requirements of Installationwith capacities Ranging from 50 SCFH (1.0Nm3/hr) to 8,000 SCFH (210.00Nm3/hr) .
Hi-Tech’s high-efciency, rugged 2-bed PSA oxygen process design offers extremely low energy consumption, on-stream efciency of 99% V/V, easy operation, and long-term Plant life of 15 years or more under standard results.
Scope of supply mainly comprises of following Air Compressor Air Drier with Pre-Filters Absorber vessels with Pre-Piped Skid Specially Selected adsorbent material Oxygen Storage Tank Touchscreen Control system Oxygen product analyzer Interconnecting pipelines
Optional- Gas Booster up-to 200 Bars G Oxygen Filling Ramp Backup System Remote Control System
MODEL AIR CFM
93~95% OXYGEN STD. OUTLET PRESSURE
OUTLET PRESSURE WITH BOOSTER
TANK SIZE (Gallons)
POWER CONSUMED SCFH LPM Nm3/hr
O-50 12 50 24 1 50 PSI 3,000 PSI Max. 60 2 KW O-75 17 75 36 1.5 50 PSI 3,000 PSI Max. 60 2.5 KW O-100 22 100 47 3 50 PSI 3,000 PSI Max. 80 4 KW O-175 32 175 83 5 50 PSI 3,000 PSI Max. 120 6.5 KW O-250 45 250 118 7 50 PSI 3,000 PSI Max. 120 9 KW O-375 68 375 177 10 50 PSI 3,000 PSI Max. 120 13 KW O-500 88 500 236 13 50 PSI 3,000 PSI Max. 200 16.9 KW O-650 118 650 307 17 50 PSI 3,000 PSI Max. 400 22.1 KW O-750 133 750 354 20 50 PSI 3,000 PSI Max. 400 26 KW O-1000 175 1,000 472 26 50 PSI 3,000 PSI Max. 400 33.8 KW O-1250 225 1,250 590 33 50 PSI 3,000 PSI Max. 660 42.9 KW O-1500 320 1,500 708 39 50 PSI 3,000 PSI Max. 660 50.7 KW O-2000 425 2,000 943 53 50 PSI 3,000 PSI Max. 660 66 KW O-3000 625 3,000 1,415 79 50 PSI 3,000 PSI Max. 1,060 95 KW O-4000 830 4,000 1,890 105 50 PSI 3,000 PSI Max. 1,220 126 KW
-Optional 99% purity, Custom Built Models also Available Note- Specifications are subject to change without prior notice.
Engineered Solutions
Hi-Tech
®
With our Worldwide base of installated equipment, Hi-Tech EngineeredSolutions has the engineering and manufacturing experience to integratesuccessfully into Plants for Ozone, Oxygen, Nitrogen, Argon, Acetylene, Nitrous Oxide & Carbon di-oxide. Our sales and service Network is dedi-cated to keeping your Oxygen Generator in top notch condition throughout year. .
Hi-Tech Engineered Solutions Equipment Operating in over 50 Countries
www.hitechgas.com
General Features of Oxygen Generators Available-
ü Meets Worldwide Manufacturing Standards Cost Saving of up-to 80% from Liquid/Cylinder supply ü Dependable Highest Reliability with Energy Efficiency ü Compact design with Easy and Simple controls ü
ü Pre-piped systems for Easy and simple installation ü Automatic operation-one touch start up and shut downü Easily Partial Load Operation in variable Demand Flowsü Ready to use upon deliveryü Touchscreen Control Panel ü Optional Remote Control or GSM Interface ü Easy to maintain with Continuously monitored Purity & Flowü Optional Cylinder filling Ramp with Emergency Disaster Recovery
Oxygen Generator with Cylinder Filling Booster
Oxygen Generator with Oxygen Storage Tank
Plant Unique features-
1. Completely Pre-Piped & Skid Mounted.
2. Containerized Shipments right from factory.
3. Critical process parameters monitored and recorded every
500 milliseconds.
4. Automatic turndown capability from 100% to 0% ow capacity.
5. Designed in accordance with local standards.
6. Automatic and unattended operation.
7. On-site start-up assistance by Hi-Tech’s Engineered
Solutions technicians anywhere in the
World.
3Our Generators Provides from 1 to 105 Nm /hr of Oxygen. Use the following Table to determine which model is most suitable to your application.
A Full Line of Oxygen Generators Available
Atlas Copco Make Screw Compressor
Process Skid Kaeser MakeScrew Compressor
OG
/7-1
5 R
ev-
1.2
Hi-Tech Gas Equipment & Hardware262 KM Stone, National Highway-1, Mandi Gobindgarh-147 301, PunjabIndia +91-1765-500999 +1-302-996-5818 www.hitechgas.com sales@hitechgas.com
WORLDWIDE LOCATION
Hi-Tech North America LLC1408, Old Capital Trail, # 554Wilmington, DE- 19808United States of America +1-302-298-1374 +1-302-996-5818 www.hitechgas.us sales@hitechgas.us
NORTH AMERICA LOCATION YOUR LOCAL CONTACT