Post on 15-Nov-2021
Page 1 of 106 Harrison Cricket Apps © ODI Users Guide
Harrison Cricket Apps
ODI Users Guide
Page 2 of 106 Harrison Cricket Apps © ODI Users Guide
Table of Contents Opening the App ........................................................................................................ 6
Entering Teams .......................................................................................................... 7
Entering new teams ............................................................................................................................ 7
Entering existing teams ..................................................................................................................... 14
Re-enter Team One’s data ............................................................................................................ 14
Re-enter Team Two’s data ............................................................................................................ 15
Swap Teams .................................................................................................................................. 16
Reset App .......................................................................................................................................... 17
Exit App ............................................................................................................................................. 18
Score Entry .............................................................................................................. 19
Using a mouse ................................................................................................................................... 19
Using a touch screen ......................................................................................................................... 20
Team One ................................................................................................................ 21
The First innings ................................................................................................................................ 21
Scores Tab – Pre-set values ........................................................................................................... 21
First Tab – Pre-set values .............................................................................................................. 22
Comparison Tab – Pre-set values .................................................................................................. 24
Scores Tab First innings – Starting the innings ................................................................................. 25
First Tab First innings – Starting the innings ..................................................................................... 27
First Tab First innings Auto Calculation............................................................................................. 28
Scores Tab First innings ten overs ..................................................................................................... 29
First Tab First innings ten overs ........................................................................................................ 31
Comparison Tab First innings ten overs ............................................................................................ 32
First innings graphs ten overs ........................................................................................................... 34
Scores Tab First innings ending the innings ...................................................................................... 36
Allotted overs completed ............................................................................................................. 36
First Tab First innings ending the innings ......................................................................................... 38
Allotted overs completed ............................................................................................................. 38
Comparison Tab First innings ending the innings ............................................................................. 40
Allotted overs completed ............................................................................................................. 40
First innings graphs Allotted overs completed ................................................................................. 41
Scores Tab First innings ending the innings ...................................................................................... 42
Team One bowled out .................................................................................................................. 42
First Tab First innings ending the innings ......................................................................................... 44
Team One bowled out .................................................................................................................. 44
Comparison Tab First innings ending the innings ............................................................................. 46
Team One bowled out .................................................................................................................. 46
First innings graphs Team One bowled out ...................................................................................... 47
Page 3 of 106 Harrison Cricket Apps © ODI Users Guide
Team Two ................................................................................................................ 48
Scores Tab Second innings ................................................................................................................ 48
Second Tab Second innings ............................................................................................................... 48
Comparison Tab Second innings ....................................................................................................... 48
Second innings run chase .................................................................................................................. 49
Scores Tab Second innings ten overs ................................................................................................ 51
Second Tab Second innings ten overs ............................................................................................... 53
Comparison Tab Second innings ten overs ....................................................................................... 55
Second innings graphs ten overs ...................................................................................................... 56
Scores Tab Second innings ending the innings ................................................................................. 57
Allotted overs completed Team One winning .............................................................................. 57
Second Tab Second innings ending the innings ................................................................................ 59
Allotted overs completed Team One winning .............................................................................. 59
Comparison Tab Second innings ending the innings ........................................................................ 61
Allotted overs completed Team One winning .............................................................................. 61
Second innings graphs Team One Winning ...................................................................................... 62
Scores Tab Second innings ending the innings ................................................................................. 63
Team Two winning target reached ............................................................................................... 63
Second Tab Second innings ending the innings ................................................................................ 65
Team Two winning target reached ............................................................................................... 65
Comparison Tab Second innings ending the innings ........................................................................ 67
Team Two winning target reached ............................................................................................... 67
Second innings graphs Team Two winning ....................................................................................... 68
Scores Tab Second innings ending the innings ................................................................................. 69
Team Two bowled out .................................................................................................................. 69
Second Tab Second innings ending the innings ................................................................................ 71
Team Two bowled out .................................................................................................................. 71
Comparison Tab Second innings ending the innings ........................................................................ 73
Team Two bowled out .................................................................................................................. 73
Second innings graphs Team Two bowled out ................................................................................. 74
Scores Tab Second innings ending the innings ................................................................................. 75
Tied game ...................................................................................................................................... 75
Second Tab Second innings ending the innings ................................................................................ 77
Tied game ...................................................................................................................................... 77
Comparison Tab Second innings ending the innings ........................................................................ 79
Tied game ...................................................................................................................................... 79
Second innings graphs Tied game ..................................................................................................... 80
Last Game ................................................................................................................ 81
Revised target and overs ......................................................................................... 83
Page 4 of 106 Harrison Cricket Apps © ODI Users Guide
First innings delays ............................................................................................................................ 83
Scores Tab Event 1 ........................................................................................................................ 84
First Tab Event 1 ............................................................................................................................ 85
Comparison Tab Event 1 ............................................................................................................... 85
Using the App Event 1 ................................................................................................................... 85
Scores Tab Event 2 ........................................................................................................................ 86
First Tab Event 2 ............................................................................................................................ 87
Comparison Tab Event 2 ............................................................................................................... 87
Using the App Event 2 ................................................................................................................... 87
Scores Tab Event 3 ........................................................................................................................ 88
First Tab Event 3 ............................................................................................................................ 90
Comparison Tab Event 3 ............................................................................................................... 92
Second innings .................................................................................................................................. 93
Setting Revised target and overs .................................................................................................. 93
Second innings delays ....................................................................................................................... 94
Scores Tab Event 1 ........................................................................................................................ 95
Second Tab Event 1 ....................................................................................................................... 96
Comparison Tab Event 1 ............................................................................................................... 96
Using the App Event 1 ................................................................................................................... 96
Scores Tab Event 2 ........................................................................................................................ 97
Second Tab Event 2 ....................................................................................................................... 98
Comparison Tab Event 2 ............................................................................................................... 98
Using the App Event 2 ................................................................................................................... 98
Scores Tab Event 3 ........................................................................................................................ 99
Second Tab Event 3 ..................................................................................................................... 100
Comparison Tab Event 3 ............................................................................................................. 101
Trouble shooting .................................................................................................... 102
Full Allotted overs ........................................................................................................................... 102
Enter Team Tab ........................................................................................................................... 102
Scores Tab ................................................................................................................................... 102
First Tab ....................................................................................................................................... 102
Second Tab .................................................................................................................................. 103
Comparison Tab .......................................................................................................................... 103
Graphs ............................................................................................................................................. 104
Revised target and overs First innings ............................................................................................ 105
Scores Tab Event 1 ...................................................................................................................... 105
Scores Tab Event 2 ...................................................................................................................... 105
Scores Tab Event 3 ...................................................................................................................... 105
Revised target and overs Second innings ....................................................................................... 106
Page 5 of 106 Harrison Cricket Apps © ODI Users Guide
Scores Tab Event 1 ...................................................................................................................... 106
Scores Tab Event 2 ...................................................................................................................... 106
Scores Tab Event 3 ...................................................................................................................... 106
Page 6 of 106 Harrison Cricket Apps © ODI Users Guide
Opening the App
1. Click on or tap the Start button.
2. Scroll down the left pane until H.
3. Click on or tap the HSA ODI app icon.
Page 7 of 106 Harrison Cricket Apps © ODI Users Guide
Entering Teams
Entering new teams For example the first game of a head to head series between two countries or a game that is part of a multiple team tournament such as a world cup or domestic competition. For this example Team One and Team Two will be used as opposed to team or country names. Step 1. Enter Team One’s name
1. Click on or tap the Enter team name text box within the Batting first group box.
2. Enter team name (maximum 20 characters) refer to Illustration 1 below. Batting first group box Enter team name text box
Illustration 1
Page 8 of 106 Harrison Cricket Apps © ODI Users Guide
Entering Teams Entering new teams Step 2. Set Team One’s back colour
1. Locate Set back colour tab control. Tab pages are numbered 1 to 6. Each tab page displays 36 different colours giving a total of 216 colours.
2. Click on or tap each of the tab pages numbered 1 to 6 to display all 216
colours.
3. Choose Team One’s back colour by clicking on or taping the radio button that best matches Team One’s back colour.
4. When a radio button is clicked on or taped a larger area next to the Set back
colour tab control is displayed in the chosen colour to signify that a colour has been selected.
5. For this example the back colour will be set to Red from tab page 1 refer to
Illustration 2 below. Set back colour tab control Red radio button selected
Illustration 2 Display area
Page 9 of 106 Harrison Cricket Apps © ODI Users Guide
Entering Teams Entering new teams Step 3. Set Team One’s fore colour
1. Locate Set fore colour tab control. Tab pages are numbered 1 to 6. Each tab page displays 36 different colours giving a total of 216 colours.
2. Click on or tap each of the tab pages numbered 1 to 6 to display all 216
colours.
3. Choose Team One’s fore colour by clicking on or taping the radio button that best matches Team One’s fore colour.
4. When a radio button is clicked on or taped a larger area next to the Set fore
colour tab control is displayed in the chosen colour to signify that a colour has been selected.
5. For this example the fore colour will be set to Dark Green from tab page 6
refer to Illustration 3 below. Set fore colour tab control Dark Green radio button selected
Illustration 3 Display area
Page 10 of 106 Harrison Cricket Apps © ODI Users Guide
Entering Teams Entering new teams Step 4. Update Team One and preview
1. To complete entering Team One’s name and setting the back and fore colours click on or tap the Update button refer to Illustration 4 below.
2. This will display Team One’s name and the back and fore colours in a preview
area to enable the contrast of the colours to be checked. If the back and fore colours are to similar set one darker and the other lighter.
3. When the Update button is clicked on or taped the App writes a small text file
that is stored on the hard drive of the device on which the App is installed on. This is to save time if Team One’s data is to be re-entered at a later date by clicking on or taping the Last Team button.
Update button Preview area
Illustration 4 Last Team button This completes the entering Team One process.
Page 11 of 106 Harrison Cricket Apps © ODI Users Guide
Entering Teams Entering new teams Step 5. Reset Batting first group box
1. If while entering the data for Team One a mistake has been made or new data is required to be entered.
2. Simply click on or tap the Reset button within the Batting first group box
message box 3 will appear refer to Illustration 5 below.
3. The App will be disabled while message box 3 appears so no other data can be entered or another button clicked on or tapped.
4. Click on or tap the OK button to reset Team One’s entries and enable the
App. Message box 3
Illustration 5
Page 12 of 106 Harrison Cricket Apps © ODI Users Guide
Entering Teams Entering new teams Step 6. Enter Team Two’s name and set back and fore colours
1. To enter Team Two’s name and set back and fore colours repeat the above Steps 1 to 4 in the Batting second group Box refer to Illustration 6 below.
2. For this example the back colour will be set to Yellow from tab page 1.
3. For this example the fore colour will be set to Blue from tab page 6.
Batting second group box Yellow radio button selected
Illustration 6 Blue radio button selected This completes the entering Team Two process. Once both teams’ data is entered a keyboard is no longer required. The App only requires a mouse or to be tapped on. Proceed to the Score entry section of this users guide page 19.
Page 13 of 106 Harrison Cricket Apps © ODI Users Guide
Entering Teams Entering new teams Step 7. Reset Batting second group box
1. If while entering the data for Team Two a mistake has been made or new data is required to be entered.
2. Click on or tap the Reset button within the Batting second group box message
box 6 will appear refer to Illustration 7 below.
3. The App will be disabled while message box 6 appears so no other data can be entered or another button clicked on or tapped.
4. Click on or tap the OK button to reset Team Two’s entries and enable the
App. Message box 6
Illustration 7
Page 14 of 106 Harrison Cricket Apps © ODI Users Guide
Entering Teams
Entering existing teams For example the second game of a head to head series between two countries Re-enter Team One’s data
1. Last team must be used before any team data is entered into the App or all team data will be overwritten and the last team data will be lost.
2. Click on or tap the Last Team button within the Batting first group box to enter
the Last Team’s data refer to Illustration 8 below.
3. The Update button will automatically be clicked on and the data updated. Last Team button
Illustration 8
Page 15 of 106 Harrison Cricket Apps © ODI Users Guide
Entering Teams Entering existing teams Re-enter Team Two’s data
1. Last team must be used before any team data is entered into the App or all team data will be overwritten and the last team data will be lost.
2. Click on or tap the Last Team button within the Batting second group box to
enter the Last Team’s data refer to Illustration 9 below.
3. The Update button will automatically be clicked on and the data updated. Last Team button
Illustration 9 If after the toss of the next game in a head to head series the batting order is the same as the previous game then proceed to the Score Entry section of this users guide page 19. Once both teams’ data is entered a keyboard is no longer required. The App only requires a mouse or to be tapped on. If after the toss the batting order is the reverse of the previous game then proceed to the Swap Teams section of this users guide page 16.
Page 16 of 106 Harrison Cricket Apps © ODI Users Guide
Entering Teams Entering existing teams Swap Teams
1. Click on or tap the Swap Teams button refer to Illustration 10 below. Team Two swapped Team One swapped
Illustration 10 Swap Teams button Once both teams’ data is entered a keyboard is no longer required. The App only requires a mouse or to be tapped on. Proceed to the Score Entry section of this users guide page 19.
Page 17 of 106 Harrison Cricket Apps © ODI Users Guide
Entering Teams
Reset App
1. Click on or tap the Reset App button message box 7 will appear refer to Illustration 11 below.
2. The App will be disabled while message box 7 appears so no other data can
be entered or another button clicked on or tapped.
3. Click on or tap the OK button to reset the App and enable the App.
Message box 7
Illustration 11
Page 18 of 106 Harrison Cricket Apps © ODI Users Guide
Entering Teams
Exit App
1. Click on or tap the Exit App button message box 8 will appear refer to Illustration 12 below.
2. The App will be disabled while message box 8 appears so no other data can
be entered or another button clicked on or tapped.
3. Click on or tap the OK button to exit the App. Message box 8
Illustration 12
Page 19 of 106 Harrison Cricket Apps © ODI Users Guide
Score Entry Using a mouse Scores are entered into the App via combo boxes with pre-set values for ease of use.
1. Click on the Scores Tab.
2. Click on the required combo box and scroll the mouse wheel down and stop at the required value refer to Illustration 13 below.
Runs combo box Scores Tab
Illustration 13
Page 20 of 106 Harrison Cricket Apps © ODI Users Guide
Score Entry
Using a touch screen Scores are entered into the App via combo boxes with pre-set values for ease of use.
1. Tap the Scores Tab.
2. Tap on the drop down arrow at the left side of the required combo box to expand the pre-set values and select the required value refer to Illustration 14 below.
Runs combo box expanded Scores Tab
Illustration 14
Page 21 of 106 Harrison Cricket Apps © ODI Users Guide
Team One
The First innings In this section of the user’s guide there is no reference to ODI games where the target is revised and the allotted overs have been reduced. This section of the user’s guide is based on the full allotment of 50 overs. Revised target and overs has its own section. If there is a time delay before or during the First innings refer to the Revised target and overs section of this user’s guide page 83. For ease of use it is recommended that Team One’s score only be entered and calculated at the end of every over in the Scores Tab and the First Tab and every ten overs in the Comparison Tab. Scores are entered via combo boxes with pre-set values. Note: Team Two’s Second innings score entry combo boxes will not be visible until Team One’s First innings is completed. Scores Tab – Pre-set values Scores Tab Team One’s First innings score entry contains 4 combo boxes as follows.
1) 1 for runs 2) 1 for wickets 3) 1 for overs 4) 1 for balls
Refer to Illustration 15 below.
Illustration 15 The Scores Tab Team One’s First innings combo boxes have following pre-set values. Runs: Pre-set values 0 to 600 Wickets: Pre-set values 0 to 10 Overs: Pre-set values 0 to 50 Balls: Pre-set values 0 to 6 Recommendation: The combo box is only required to be used if Team One is bowled out before their allotted overs, or Team two wins.
Page 22 of 106 Harrison Cricket Apps © ODI Users Guide
Team One First Tab – Pre-set values Note: The First Tab will not be visible until the score has been entered into the First innings section of the Scores Tab and calculated. First Tab Team One’s score entry contains 4 group boxes. Each group box has 2 columns of combo boxes as follows.
1) 1 column for Runs abbreviated to R x 10 rows 2) 1 column for Wickets abbreviated to W x 10 rows
First Tab Team One’s score entry also contains 1 combo box for Overs. Refer to Illustration 16 below.
Illustration 16
Page 23 of 106 Harrison Cricket Apps © ODI Users Guide
Team One First Tab – Pre-set values The First Tab Team One’s combo boxes have following pre-set values. Group box – Ten overs Runs abbreviated to R numbered 1 to 10: Pre-set values 0 to 50 Wickets abbreviated to W numbered 1 to 10: Pre-set values 0 to 6 Group box – Twenty overs Runs abbreviated to R numbered 11 to 20: Pre-set values 0 to 50 Wickets abbreviated to W numbered 11 to 20: Pre-set values 0 to 6 Group box – Thirty overs Runs abbreviated to R numbered 21 to 30: Pre-set values 0 to 50 Wickets abbreviated to W numbered 21 to 30: Pre-set values 0 to 6 Group box – Forty overs Runs abbreviated to R numbered 31 to 40: Pre-set values 0 to 50 Wickets abbreviated to W numbered 31 to 40: Pre-set values 0 to 6 Group box – Fifty overs Runs abbreviated to R numbered 41 to 50: Pre-set values 0 to 50 Wickets abbreviated to W numbered 41 to 50: Pre-set values 0 to 6 Overs: Pre-set values 0 to 50
Page 24 of 106 Harrison Cricket Apps © ODI Users Guide
Team One Comparison Tab – Pre-set values Note: The Comparison Tab will not be visible until the score has been entered into the First innings section of the Scores Tab and calculated. The Comparison Tab contains 5 group boxes with 3 combo boxes as follows.
1) 1 for Runs abbreviated to R 2) 1 for Wickets abbreviated to W 3) 1 for Overs abbreviated to O
Refer to Illustration 17 below.
Illustration 17 The Comparison Tab Team One’s combo boxes have following pre-set values. Group box – Ten overs Runs abbreviated to R: Pre-set values 0 to 120 Wickets abbreviated to W: Pre-set values 0 to 10 Overs abbreviated to O: Pre-set values 0 to 10 Group box – Twenty overs Runs abbreviated to R: Pre-set values 0 to 240 Wickets abbreviated to W: Pre-set values 0 to 10 Overs abbreviated to O: Pre-set values 0, 10 to 20 Group box – Thirty overs Runs abbreviated to R: Pre-set values 0 to 360 Wickets abbreviated to W: Pre-set values 0 to 10 Overs abbreviated to O: Pre-set values 0, 20 to 30 Group box – Forty overs Runs abbreviated to R: Pre-set values 0 to 480 Wickets abbreviated to W: Pre-set values 0 to 10 Overs abbreviated to O: Pre-set values 0, 30 to 40 Group box – Fifty overs Runs abbreviated to R: Pre-set values 0 to 600 Wickets abbreviated to W: Pre-set values 0 to 10 Overs abbreviated to O: Pre-set values 0, 40 to 50
Page 25 of 106 Harrison Cricket Apps © ODI Users Guide
Team One
Scores Tab First innings – Starting the innings The score entries in this user’s guide are examples only and are to be replaced with the actual game scores when using the App. For this example runs will be set to 4, wickets will be set to 1, overs will be set to 1 and balls will remain at 0.
1. At the end of over 1 click on or tap the Runs combo box and enter the current runs.
2. If no wicket has fallen go to step 3. If a wicket has fallen then click on or tap
the Wickets combo box and enter the current wickets.
3. Click on or tap the Overs combo box and enter the current overs. If the first over is a maiden over i.e. no runs were scored, the Overs combo box must be set to 1 and calculated otherwise the First tab and the Comparison tab will not be visible.
4. Click on or tap the First innings Calculate button. This action will calculate and
display the following information refer to Table 1 and Illustration 18 below. Current run rate Current runs 4 divided by current overs
1 = 4.00 Overs remaining Allotted overs 50 minus current overs
1 = 49 Balls remaining Overs remaining 49 multiplied by 6 = 294 Wickets in hand 10 minus current wickets 1 = 9 Projected total at current run rate Overs remaining 49 multiplied by current
run rate 4 = 196 plus Current runs 4 = 200 Projected total at 4.50 runs per over Overs remaining 49 multiplied by 4.5 runs
per over = 221 plus Current runs 4 = 225 Projected total at 5.00 runs per over Overs remaining 49 multiplied by 5 runs per
over = 245 plus Current runs 4 = 249 Projected total at 5.50 runs per over Overs remaining 49 multiplied by 5.5 runs
per over = 270 plus Current runs 4 = 274 Projected total at 6.00 runs per over Overs remaining 49 multiplied by 6 runs per
over = 294 plus Current runs 4 = 298 Projected total at 6.50 runs per over Overs remaining 49 multiplied by 6.5 runs
per over = 319 plus Current runs 4 = 323 Projected total at 7.00 runs per over Overs remaining 49 multiplied by 7 runs per
over = 343 plus Current runs 4 = 347 Table 1
5. Projected totals at 4.50 runs per over through to 7.00 runs per over will automatic adjust as the run rate increases or decreases.
6. Continue to enter and calculate the scores at the end of every over until all the allotted overs are completed or Team One is bowled out. Refer to Illustration 18 below.
Page 26 of 106 Harrison Cricket Apps © ODI Users Guide
Team One Scores Tab First innings – Starting the innings Calculate button
Illustration 18 Wicket dots
Page 27 of 106 Harrison Cricket Apps © ODI Users Guide
Team One
First Tab First innings – Starting the innings For this example runs will be set to 4, wickets will be set to 1, overs will be set to 1.
1. Click on or Tap the First Tab.
2. At the end of over 1 click on or tap the Runs combo box and enter the current runs.
3. If no wicket has fallen go to step 4. If a wicket has fallen then click on or tap
the Wickets combo box and enter the current wickets.
4. Click on or tap the Overs combo box and enter the current overs. If the first over is a maiden over i.e. no runs were scored, the Overs combo box must be set to 1.
5. Click on or tap the First Calculate button. This action will calculate and display
the following information refer to Table 2 and Illustration 19 below. Score 4 runs – 1 wicket Run rate Runs 4 divided by current overs 1 = 4.00 Last five Will not be displayed until over 5 Last five run rate Will not be displayed until over 5
Table 2 Calculate button
Illustration 19
Page 28 of 106 Harrison Cricket Apps © ODI Users Guide
Team One
First Tab First innings Auto Calculation Recommendation: Use the Auto Calculation function.
1. Click on or Tap the First Tab.
2. Turn on Auto Calculate by clicking on or taping the Auto Calculate check box.
3. Once the Auto Calculation function is set to on this will automatically update the overs combo box, calculate and display the current score.
4. For example when entering the runs for over 2, simply click or tap on over 2
runs combo box scroll down until the scored displayed is 10 – 1.
5. When 10 – 1 is displayed the correct amount of runs in over 2 combo box will be entered which is 6.
6. The same functionality applies to all combo boxes in the First Tab.
7. For example when entering the wickets for over 2, simply click or tap on over
2 wickets combo box scroll down until the scored displayed is 10 – 2.
8. When 10 – 2 is displayed the correct amount of wickets in over 2 combo box will be entered which is 1.
9. Continue to enter and calculate the scores at the end of every over until all the
allotted overs are completed or Team One is bowled out. Refer to Illustration 20 below.
Overs combo box Runs combo boxes Wickets combo boxes
Illustration 20 Current score display Auto Calculate check box
Page 29 of 106 Harrison Cricket Apps © ODI Users Guide
Team One
Scores Tab First innings ten overs Continue to enter the score at the end of each over as follows up until over 10.
1. Click on or Tap the Scores Tab.
2. At the end of each over click on or tap the Runs combo box and enter the current runs.
3. If no wicket has fallen go to step 4. If a wicket has fallen then click on or tap
the Wickets combo box and enter the current wickets.
4. Click on or tap the Overs combo box and enter the current overs. If an over is a maiden over i.e. no runs were scored, the Overs combo box must be set to the current overs and calculated otherwise the incorrect information will be displayed.
5. For this example runs will be set to 58, wickets will be set to 2, overs will be
set to 10 and balls will remain at 0.
6. Click on or tap the First innings Calculate button. This action will calculate and display the following information refer to Table 3 and Illustration 21 below.
Current run rate 5.80 Overs remaining 40 Balls remaining 240 Wickets in hand 8 Projected total at current run rate 290 Projected total at 6.00 runs per over 298 Projected total at 6.50 runs per over 318 Projected total at 7.00 runs per over 338 Projected total at 7.50 runs per over 358 Projected total at 8.00 runs per over 378 Projected total at 8.50 runs per over 398
Table 3
7. Projected totals at 6.00 runs per over through to 8.50 runs per over will automatic adjust as the run rate increases or decreases. However they will always start above the current run rate.
Page 30 of 106 Harrison Cricket Apps © ODI Users Guide
Team One
Scores Tab First innings ten overs
Illustration 21
Page 31 of 106 Harrison Cricket Apps © ODI Users Guide
Team One
First Tab First innings ten overs Continue to enter the score at the end of each over as follows up until over 10.
1. Click on or Tap the First Tab.
2. With the Auto Calculate function set to on overs are updated automatically provided either the Runs or Wickets combo boxes are updated. There is no need to click on or tap the First Calculate button.
3. At the end of each over click on or tap the Runs combo box and watching the
current score display scroll down until the current score is displayed.
4. If no wicket has been taken go to step 5. If a wicket has been taken then click on or tap the Wickets combo box and watching the current score display scroll down until the current score is displayed.
5. If an over is a maiden over i.e. no runs were scored and also no wickets have
been taken, the Overs combo box must be set to the current overs.
6. The following information will be displayed refer to Table 4 and Illustration 22 below.
Score 58 – 2 Run rate 5.80 Last five 31 – 0 Last five run rate 6.20
Table 4
Illustration 22
Page 32 of 106 Harrison Cricket Apps © ODI Users Guide
Team One
Comparison Tab First innings ten overs Recommendation: The Comparison Tab only requires to the have the score entered every 10 overs. The Comparison Tab First Innings contains 5 group boxes with 3 combo boxes 1 for Runs abbreviated to R, 1 for Wickets abbreviated to W and 1 for Overs abbreviated to O. Enter the score at the end of over 10 within the Ten overs group box as follows. For this example runs will be set to 58, wickets will be set to 2, overs will be set to 10.
1. Click on or Tap the Comparison Tab.
2. At the end of over 10 click on or tap the Runs combo box and enter the current runs.
3. If no wicket has fallen go to step 4. If a wicket has fallen then click on or tap
the Wickets combo box and enter the current wickets.
4. Click on or tap the Overs combo box and scroll down to 10.
5. Click on or tap the Comparison Calculate button. This action will calculate and display the following information at the end of over 10 refer to Table 5 and Illustration 23 below.
Progressive run rate Runs 58 divided by current overs 10 = 5.80 Projected score at 10 overs Overs remaining 40 multiplied by current run rate
5.80 = 232 plus Current runs 58 = 290 Comparison score 58 – 2 58 runs – 2 wickets Comparison overs 10 Comparison run rate Runs 58 divided by overs 10 = 5.80
Table 5 As well as the above information being displayed. The values contained in the Ten overs group box’s combo boxes are automatically transferred to the combo boxes of the Twenty overs group box. This is to save time for when the Twenty overs group box’s score is entered at the end of over 20. No information in the Twenty overs group box will be calculate or displayed at this time. No further action is required until the end of over 20 refer to Illustration 23 below. Continue to enter and calculate the scores every 10 overs until all the allotted overs are completed or Team One is bowled out. Refer to Illustration 23 below.
Page 33 of 106 Harrison Cricket Apps © ODI Users Guide
Team One Comparison Tab First innings ten overs Ten overs group box Progressive score section Twenty overs group box
Illustration 23 Overs combo box Comparison score section
Page 34 of 106 Harrison Cricket Apps © ODI Users Guide
Team One
First innings graphs ten overs Harrison Sports Apps ODI App displays 4 graphs which are calculated and displayed automatically when their respective tabs are clicked on or taped. They are as follows
1. The Manhattan graph (as it resembles the Manhattan sky line) is a column graph which displays the amount of runs for each individual over in a column. If a wicket being taken has been entered into the combo box for that over a dot will appear within the column.
2. The Innings graph is a linear graph which displays the current score in runs over by over. If a wicket being taken has been entered into the combo box for that over a dot will appear on the line of the linear graph.
3. The Run Rate graph is a linear graph which displays the average run rate
over by over. If a wicket being taken has been entered into the combo box for that over a dot will appear on the line of the linear graph.
4. The Bar graph is a horizontal bar graph which displays the amount of runs for
each 10 over increment they are as follows refer to Table 6 below. Increment 1 0 to 10 overs Increment 2 11 to 20 overs Increment 3 21 to 30 overs Increment 4 31 to 40 overs Increment 5 41 to 50 overs
Table 6
5. Click on or tap the Manhattan, Innings, Run Rate and Graph tabs after score entry and calculation as desired refer Illustration 24.
Page 35 of 106 Harrison Cricket Apps © ODI Users Guide
Team One First innings graphs ten overs
Manhattan graph Innings graph
Illustration 24 Run Rate graph Bar graph
Page 36 of 106 Harrison Cricket Apps © ODI Users Guide
Team One
Scores Tab First innings ending the innings Allotted overs completed Continue to enter the score at the end of each over as follows up until over 50.
1. Click on or Tap the Scores Tab.
2. At the end of each over click on or tap the Runs combo box and enter the current runs.
3. If no wicket has fallen go to step 4. If a wicket has fallen then click on or tap
the Wickets combo box and enter the current wickets.
4. Click on or tap the Overs combo box and enter the current overs. If an over is a maiden over i.e. no runs were scored, the Overs combo box must be set to the current overs and calculated otherwise the incorrect information will be displayed.
5. For this example runs will be set to 338, wickets will be set to 5, overs will be set to 50 and balls will remain at 0.
6. Click on or tap the First innings Calculate button.
7. With the First innings overs set to 50 this will end the First innings. Team
Two’s Second innings combo boxes will now be visible refer to Illustration 25 below. Team Two’s Second innings run chase information will also be displayed.
Page 37 of 106 Harrison Cricket Apps © ODI Users Guide
Team One Scores Tab First innings ending the innings Allotted overs completed First innings ended Second innings combo boxes visible
Illustration 25
Page 38 of 106 Harrison Cricket Apps © ODI Users Guide
Team One
First Tab First innings ending the innings Allotted overs completed Continue to enter the score at the end of each over as follows up until over 50.
1. Click on or Tap the First Tab.
2. With the Auto Calculate function set to on overs are updated automatically provided either the runs or Wickets combo boxes are updated. There is no need to click on or tap the First Calculate button.
3. At the end of each over click on or tap the Runs combo box and watching the
current score display scroll down until the current score is displayed.
4. If no wicket has been taken go to step 5. If a wicket has been taken then click on or tap the Wickets combo box and watching the current score display scroll down until the current score is displayed.
5. If an over is a maiden over i.e. no runs were scored and also no wickets have
been taken, the Overs combo box must be set to the current overs.
6. The following information will be displayed refer to Table 7 and Illustration 26 below.
Score 338 – 5 Run rate 6.76 Last five 50 – 0 Last five run rate 10.00
Table 7
7. With the First innings overs set to 50 this will end the First innings. The Second Tab with Team Two’s Second innings combo boxes will now be visible refer to Illustration 27 below.
8. Click on or tap the Run Rate Tab with the First innings ended a straight white
line will be displayed. This is the required Run Rate line that Team Two must maintain to win the game refer Illustration 29 page 41.
Page 39 of 106 Harrison Cricket Apps © ODI Users Guide
Team One First Tab First innings ending the innings Allotted overs completed Overs combo box set to 50
Illustration 26 Second Tab and Second innings combo boxes visible
Illustration 27
Page 40 of 106 Harrison Cricket Apps © ODI Users Guide
Team One
Comparison Tab First innings ending the innings Allotted overs completed Enter the score at the end of over 50 within the Fifty overs group box as follows. For this example runs will be set to 338, wickets will be set to 5, overs will be set to 50.
1. Click on or Tap the Comparison Tab.
2. At the end of over 50 click on or tap the Runs combo box and enter the current runs.
3. If no wicket has fallen go to step 4. If a wicket has fallen then click on or tap
the Wickets combo box and enter the current wickets.
4. Click on or tap the Overs combo box and scroll down to 50.
5. Click on or tap the Comparison Calculate button. This action will calculate and display the following information at the end of over 50 refer to Table 8 and Illustration 28 below.
Progressive run rate 6.76 Final score at 50 overs 338 Comparison score 88 – 2 Comparison overs 10 Comparison run rate 8.80
Table 8
6. With the First innings Fifty overs group box overs combo box set to 50 this will end the First innings. Team Two’s Second innings combo boxes will now be visible refer to Illustration 28 below.
7. This completes the score entry for Team One First innings based on the full allotment of 50 overs.
Page 41 of 106 Harrison Cricket Apps © ODI Users Guide
Team One Comparison Tab First innings ending the innings Allotted overs completed Fifty overs group box Overs set to 50
Illustration 28
First innings graphs Allotted overs completed
Manhattan graph Innings graph
Illustration 29 Required Run Rate line Bar graph
Page 42 of 106 Harrison Cricket Apps © ODI Users Guide
Team One
Scores Tab First innings ending the innings Team One bowled out Continue to enter the score at the end of each over as follows up until Team One is bowled out. This will end the First innings.
1. Click on or Tap the Scores Tab.
2. At the end of each over click on or tap the Runs combo box and enter the current runs.
3. Click on or tap the Wickets combo box and enter the current wickets.
4. Click on or tap the Overs combo box and enter the current overs. If an over is
a maiden over i.e. no runs were scored, the Overs combo box must be set to the current overs and calculated otherwise the incorrect information will be displayed.
5. For this example runs will be set to 204, wickets will be set to 10, overs will be
set to 45 and balls will be set at 3.
6. Click on or tap the First innings Calculate button.
7. With the First innings wickets set to 10 this will end the First innings. Team Two’s Second innings combo boxes will now be visible refer to Illustration 30 below. Team Two’s Second innings run chase information will also be displayed refer to Team Two’s section of the user’s guide.
8. Team One First innings Final run rate calculation. Because Team One has
been bowled out the Final run rate calculation is as follows.
204 runs divided by Allotted overs 50 = 4.08 refer to Illustration 30.
Note: The calculation of the Final run rate when a team is bowled out is their final score 204 runs divided by the allotted overs 50 not the amount of overs they were bowled out.
Page 43 of 106 Harrison Cricket Apps © ODI Users Guide
Team One Scores Tab First innings ending the innings Team One bowled out First innings ended Second innings combo boxes visible
Illustration 30 Wickets set to 10
Page 44 of 106 Harrison Cricket Apps © ODI Users Guide
Team One
First Tab First innings ending the innings Team One bowled out Continue to enter the score at the end of each over as follows up until Team One is bowled out. This will end the First innings. Do not enter scores past the over that Team One was bowled out. For this example no scores are to be entered in the combo boxes for overs 47, 48, 49 and 50.
1. Click on or Tap the First Tab.
2. With the Auto Calculate function set to on overs are updated automatically provided either the Runs or Wickets combo boxes are updated. There is no need to click on or tap the First Calculate button.
3. At the end of each over click on or tap the Runs combo box and watching the
current score display scroll down until the current score is displayed.
4. Click on or tap the Wickets combo box and watching the current score display scroll down until the current score is displayed.
5. If an over is a maiden over i.e. no runs were scored, the Overs combo box
must be set to the current overs and calculated.
6. The following information will be displayed refer to Table 9 and Illustration 31 below.
Score 204 – 10 Run rate 4.08 Last five 26 – 4 Last five run rate 5.20
Table 9
7. With the First innings wickets set to 10 this will end the First innings. The Second Tab with Team Two’s Second innings combo boxes will now be visible refer to Illustration 32 below.
8. Click on or tap the Run Rate Tab with the First innings ended a straight white
line will be displayed. This is the required Run Rate line that Team Two must maintain to win the game refer Illustration 34 page 47.
Note: The calculation of the Final run rate when a team is bowled out is their final score 204 runs divided by the allotted overs 50 not the amount of overs they were bowled out.
Page 45 of 106 Harrison Cricket Apps © ODI Users Guide
Team One First Tab First innings ending the innings Team One bowled out Current score display wickets set to 10
Illustration 31 No scores entered in the combo boxes for overs 47, 48, 49 and 50. Second Tab and Second innings combo boxes visible
Illustration 32
Page 46 of 106 Harrison Cricket Apps © ODI Users Guide
Team One
Comparison Tab First innings ending the innings Team One bowled out Continue to enter the score at the end of each over as follows up until Team One is bowled out. This will end the First innings. For this example runs will be set to 204, wickets will be set to 10, overs will be set to 46.
1. Click on or Tap the Comparison Tab.
2. At the end of over 46 click on or tap the Runs combo box and enter the current runs.
3. Click on or tap the Wickets combo box and scroll down to 10.
4. Click on or tap the Overs combo box and scroll down to 46.
5. Click on or tap the Comparison Calculate button. This action will calculate and display the following information with wickets set to 10 refer to Table 10 and Illustration 33 below.
Progressive run rate 4.08 Final score at 46 overs 204 Comparison score 33 – 4 Comparison overs 6 Comparison run rate 5.50
Table 10
6. With the First innings Fifty overs group box wickets combo box set to 10 this will end the First innings. Team Two’s Second innings combo boxes will now be visible refer to Illustration 33 below.
7. This completes the score entry for Team One First innings based on Team One being bowled out.
Note: The calculation of the Final run rate when a team is bowled out is their final score 204 runs divided by the allotted overs 50 not the amount of overs they were bowled out.
Page 47 of 106 Harrison Cricket Apps © ODI Users Guide
Team One Comparison Tab First innings ending the innings Team One bowled out Fifty overs group box Wickets set to 10
Illustration 33
First innings graphs Team One bowled out
Manhattan graph Innings graph
Illustration 34 Required Run Rate line Bar graph
Page 48 of 106 Harrison Cricket Apps © ODI Users Guide
Team Two
Scores Tab Second innings Enter the scores for the Scores Tab Second innings the same way as the Scores Tab First innings.
Second Tab Second innings Enter the scores for the Second Tab Second innings the same way as the First Tab First innings.
Comparison Tab Second innings Enter the scores for the Comparison Tab Second innings the same way as the Comparison Tab First innings.
Page 49 of 106 Harrison Cricket Apps © ODI Users Guide
Team Two
Second innings run chase In this section of the user’s guide there is no reference to ODI games where the target is revised and the allotted overs have been reduced. This section of the user’s guide is based on the full allotment of 50 overs. Revised target and overs has its own section. For ease of use it is recommended that Team Two’s score only be entered and calculated at the end of every over in the Scores Tab and the Second Tab and every ten overs in the Comparison Tab. Scores are entered via combo boxes with pre-set values. Team Two’s Second innings combo boxes have the same pre-set values as Team One’s First innings combo boxes. With the Team One’s First innings ended Team Two’s Second innings combo boxes will now be visible. Team Two’s Second innings run chase information will also be displayed as follows refer to Table 11 and Illustration 35 below. Target Team One’s score 338 plus 1 = 339 Overs remaining Allotted overs 50 minus current overs
0 = 50 Balls remaining 50 overs multiplied by 6 balls = 300 Runs to win Target 339 minus current runs 0 = 339 Wickets in hand 10 minus current wickets 0 = 10 Run rate at start Target 339 divided by allotted overs
50 = 6.78 Required run rate Runs to win 339 divided by overs remaining
50 = 6.78 Required score Current overs 0 multiplied by Required run
rate 6.78 = 0 Gap between balls and runs at start Balls at start 300 minus Target
339 = minus 39 Gap between current balls and runs Balls remaining 300 minus Runs to win
339 = minus 39 Table 11 Note: Required score is a guide only to what Team Two’s score should be at a certain point in the run chase.
Page 50 of 106 Harrison Cricket Apps © ODI Users Guide
Team Two The Second innings run chase
Second innings combo boxes visible
Illustration 35
Page 51 of 106 Harrison Cricket Apps © ODI Users Guide
Team Two
Scores Tab Second innings ten overs Continue to enter the score at the end of each over as follows up until over 10.
1. Click on or Tap the Scores Tab.
2. At the end of each over click on or tap the Runs combo box and enter the current runs.
3. If no wicket has fallen go to step 4. If a wicket has fallen then click on or tap
the Wickets combo box and enter the current wickets.
4. Click on or tap the Overs combo box and enter the current overs. If an over is a maiden over i.e. no runs were scored, the Overs combo box must be set to the current overs and calculated otherwise the incorrect information will be displayed.
5. For this example runs will be set to 42, wickets will be set to 2, overs will be
set to 10 and balls will remain at 0.
6. Click on or tap the First innings Calculate button. This action will calculate and display the following information refer to Table 12 and Illustration 36 below.
Current run rate 4.20 Target 339 Overs remaining 40 Balls remaining 240 Runs to win 297 Wickets in hand 8 Run rate at start 6.78 Required run rate 7.43 Required score 68 Gap between balls and runs at start -39 Gap between current balls and runs -57
Table 12
Page 52 of 106 Harrison Cricket Apps © ODI Users Guide
Team Two Scores Tab Second innings ten overs
Illustration 36
Page 53 of 106 Harrison Cricket Apps © ODI Users Guide
Team Two
Second Tab Second innings ten overs Continue to enter the score at the end of every over up until the end of over 10.
1. With the Auto Calculate function set to on overs are updated automatically provided either the Runs or Wickets combo boxes are updated.
2. The following information will be displayed for a comparison for Team One.
This information will be displayed in Team One’s colours refer to Table 13 and Illustration 37 below.
Comparison Score 58 – 2 Comparison run rate 5.80 Comparison Last five 31 – 0 Comparison Last five run rate 6.20
Table 13
3. The following information will be displayed for Team Two refer to Table 14 and Illustration 37 below.
Score 42 – 2 Run rate 4.20 Last five 21 – 2 Last five run rate 4.20
Table 14
Page 54 of 106 Harrison Cricket Apps © ODI Users Guide
Team Two Second Tab Second innings ten overs Team One’s Comparison information
Illustration 37
Page 55 of 106 Harrison Cricket Apps © ODI Users Guide
Team Two
Comparison Tab Second innings ten overs Enter the score at the end of over 10.
1. Click on or Tap the Comparison Tab.
2. Enter the scores into the Ten overs group box combo boxes.
3. Click on or tap the Comparison Calculate button. This action will calculate and display the following information at the end of over 10 refer to Table 15 and Illustration 38 below.
Progressive run rate 4.20 Required run rate 7.43 Comparison score 42 – 2 Comparison overs 10 Comparison run rate 4.20
Table 15
Illustration 38
Page 56 of 106 Harrison Cricket Apps © ODI Users Guide
Team Two
Second innings graphs ten overs
Manhattan graph Innings graph
Illustration 39 Run Rate graph Bar graph
Page 57 of 106 Harrison Cricket Apps © ODI Users Guide
Team Two
Scores Tab Second innings ending the innings Allotted overs completed Team One winning Continue to enter the score at the end of every over up until the end of over 50.
1. Click on or Tap the Scores Tab.
2. For this example runs will be set to 287, wickets will be set to 9, overs will be set to 50 and balls will remain at 0.
3. Click on or tap the First innings Calculate button.
4. With the Second innings overs set to 50 this will end the Second innings and
the game. The following information will be displayed refer to Table 16 and Illustration 40 below.
Final run rate 5.74 Target 339 Overs remaining 0 Balls remaining 0 Team One won by 51 runs Wickets in hand 3 Run rate at start 6.78 Required run rate 0.00 Required score 339 Gap between balls and runs at start -39 Gap between current balls and runs -52
Table 16
Page 58 of 106 Harrison Cricket Apps © ODI Users Guide
Team Two Scores Tab Second innings ending the innings Allotted overs completed Team One winning Second innings overs set to 50
Illustration 40
Page 59 of 106 Harrison Cricket Apps © ODI Users Guide
Team Two
Second Tab Second innings ending the innings Allotted overs completed Team One winning Continue to enter the score at the end of every over up until the end of over 50.
1. With the Auto Calculate function set to on overs are updated automatically provided either the Runs or Wickets combo boxes are updated.
2. The following information will be displayed for a comparison for Team One. This information will be displayed in Team One’s colours refer to Table 17 and Illustration 41 below.
Comparison Score 338 – 5 Comparison run rate 6.76 Comparison Last five 50 – 0 Comparison Last five run rate 10.00
Table 17
3. The following information will be displayed for Team Two refer to Table 18 and Illustration 41 below.
Score 287 – 7 Run rate 5.74 Last five 30 – 1 Last five run rate 6.00
Table 18
Page 60 of 106 Harrison Cricket Apps © ODI Users Guide
Team Two Second Tab Second innings ending the innings Allotted overs completed Team One winning
Illustration 41
Page 61 of 106 Harrison Cricket Apps © ODI Users Guide
Team Two
Comparison Tab Second innings ending the innings Allotted overs completed Team One winning Continue to enter the score every 10 overs up until the end of over 50. For this example runs will be set to 287, wickets will be set to 7, overs will be set to 50.
1. Click on or Tap the Comparison Tab.
2. Enter the scores into the Fifty overs group box combo boxes.
3. Click on or tap the Comparison Calculate button. This action will calculate and display the following information at the end of over 50 refer to Table 19 and Illustration 42 below.
Progressive run rate 5.74 Required run rate 0.00 Comparison score 60 – 1 Comparison overs 10 Comparison run rate 6.00
Table 19
Illustration 42
Page 62 of 106 Harrison Cricket Apps © ODI Users Guide
Team Two
Second innings graphs Team One Winning
Manhattan graph Innings graph
Illustration 43 Run Rate graph Bar graph
Page 63 of 106 Harrison Cricket Apps © ODI Users Guide
Team Two
Scores Tab Second innings ending the innings Team Two winning target reached Continue to enter the score at the end of every over up until Team two wins.
1. Click on or Tap the Scores Tab.
2. For this example runs will be set to 339, wickets will be set to 6, overs will be set to 49 and balls will remain at 0.
3. Click on or tap the First innings Calculate button.
4. With the Team Two reaching the target this will end the Second innings and
the game. The following information will be displayed refer to Table 20 and Illustration 44 below.
Final run rate 6.92 Target 339 Overs remaining 1 Balls remaining 6 Runs to win 0 Team Two won by 4 Wickets Run rate at start 6.78 Required run rate 0.00 Required score 332 Gap between balls and runs at start -39 Gap between current balls and runs 0
Table 20
Page 64 of 106 Harrison Cricket Apps © ODI Users Guide
Team Two Scores Tab Second innings ending the innings Team Two winning target reached
Illustration 44
Page 65 of 106 Harrison Cricket Apps © ODI Users Guide
Team Two
Second Tab Second innings ending the innings Team Two winning target reached Continue to enter the score at the end of every over up until Team two wins.
1. With the Auto Calculate function set to on overs are updated automatically provided either the Runs or Wickets combo boxes are updated.
2. The following information will be displayed for a comparison for Team One. This information will be displayed in Team One’s colours refer to Table 21 and Illustration 45 below.
Comparison Score 328 – 5 Comparison run rate 6.69 Comparison Last five 47 – 0 Comparison Last five run rate 9.40
Table 21
3. The following information will be displayed for Team Two refer to Table 22 and Illustration 45 below.
Score 339 – 6 Run rate 6.92 Last five 40 – 1 Last five run rate 8.00
Table 22
Page 66 of 106 Harrison Cricket Apps © ODI Users Guide
Team Two Second Tab Second innings ending the innings Team Two winning target reached
Illustration 45
Page 67 of 106 Harrison Cricket Apps © ODI Users Guide
Team Two
Comparison Tab Second innings ending the innings Team Two winning target reached Continue to enter the score every 10 overs up until Team two wins. For this example runs will be set to 339, wickets will be set to 6, overs will be set to 49.
1. Click on or Tap the Comparison Tab.
2. Enter the scores into the Fifty overs group box combo boxes.
3. Click on or tap the Comparison Calculate button. This action will calculate and display the following information refer to Table 23 and Illustration 46 below.
Progressive run rate 6.92 Required run rate 0.00 Comparison score 68 – 1 Comparison overs 9 Comparison run rate 7.56
Table 23
Illustration 46
Page 68 of 106 Harrison Cricket Apps © ODI Users Guide
Team Two
Second innings graphs Team Two winning
Manhattan graph Innings graph
Illustration 47 Run Rate graph Bar graph
Page 69 of 106 Harrison Cricket Apps © ODI Users Guide
Team Two
Scores Tab Second innings ending the innings Team Two bowled out Continue to enter the score at the end of each over as follows up until Team Two is bowled out. This will end the Second innings and the game.
1. Click on or Tap the Scores Tab.
2. For this example runs will be set to 226, wickets will be set to 10, overs will be set to 46 and balls will remain at 0.
3. Click on or tap the First innings Calculate button.
4. With the Second innings wickets set to 10 this will end the Second innings
and the game. The following information will be displayed refer to Table 24 and Illustration 48 below.
Final run rate 4.52 Target 339 Overs remaining 4 Balls remaining 24 Team One won by 112 runs Wickets in hand 0 Run rate at start 6.78 Required run rate 0.00 Required score 312 Gap between balls and runs at start -39 Gap between current balls and runs -89
Table 24 Note: The calculation of the Final run rate when a team is bowled out is their final score 226 runs divided by the allotted overs 50 not the amount of overs they were bowled out for.
Page 70 of 106 Harrison Cricket Apps © ODI Users Guide
Team Two Scores Tab Second innings ending the innings Team Two bowled out Second innings wickets set to 10
Illustration 48
Page 71 of 106 Harrison Cricket Apps © ODI Users Guide
Team Two
Second Tab Second innings ending the innings Team Two bowled out Continue to enter the score at the end of each over as follows up until Team Two is bowled out. This will end the Second innings and the game.
1. With the Auto Calculate function set to on overs are updated automatically provided either the Runs or Wickets combo boxes are updated.
2. The following information will be displayed for a comparison for Team One.
This information will be displayed in Team One’s colours refer to Table 25 and Illustration 49 below.
Comparison Score 295 – 5 Comparison run rate 6.41 Comparison Last five 36 – 2 Comparison Last five run rate 7.20
Table 25
3. The following information will be displayed for Team Two refer to Table 26 and Illustration 49 below.
Score 226 – 10 Run rate 4.52 Last five 31 – 2 Last five run rate 6.20
Table 26 Note: The calculation of the Final run rate when a team is bowled out is their final score 226 runs divided by the allotted overs 50 not the amount of overs they were bowled out for.
Page 72 of 106 Harrison Cricket Apps © ODI Users Guide
Team Two Second Tab Second innings ending the innings Team Two bowled out
Illustration 49
Page 73 of 106 Harrison Cricket Apps © ODI Users Guide
Team Two
Comparison Tab Second innings ending the innings Team Two bowled out Continue to enter the score every 10 overs up until the Team Two is bowled out. For this example runs will be set to 226, wickets will be set to 10, overs will be set to 46.
1. Click on or Tap the Comparison Tab.
2. Enter the scores into the Fifty overs group box combo boxes.
3. Click on or tap the Comparison Calculate button. This action will calculate and display the following information when Team Two is bowled out refer to Table 27 and Illustration 50 below.
Progressive run rate 4.52 Required run rate 0.00 Comparison score 38 – 2 Comparison overs 6 Comparison run rate 6.33
Table 27 Note: The calculation of the Final run rate when a team is bowled out is their final score 226 runs divided by the allotted overs 50 not the amount of overs 46 they were bowled out for.
Illustration 50
Page 74 of 106 Harrison Cricket Apps © ODI Users Guide
Team Two
Second innings graphs Team Two bowled out
Manhattan graph Innings graph
Illustration 51 Run Rate graph Bar graph
Page 75 of 106 Harrison Cricket Apps © ODI Users Guide
Team Two
Scores Tab Second innings ending the innings Tied game Continue to enter the score at the end of every over up until the end of over 50.
1. Click on or Tap the Scores Tab.
2. For this example runs will be set to 338, wickets will be set to 7, overs will be set to 50 and balls will remain at 0.
3. Click on or tap the First innings Calculate button.
4. With the Second innings overs set to 50 this will end the Second innings and
the game. The following information will be displayed refer to Table 28 and Illustration 52 below.
Final run rate 6.76 Target 339 Overs remaining 0 Balls remaining 0 It’s a tie Wickets in hand 3 Run rate at start 6.78 Required run rate 0.00 Required score 339 Gap between balls and runs at start -39 Gap between current balls and runs -1
Table 28
Page 76 of 106 Harrison Cricket Apps © ODI Users Guide
Team Two Scores Tab Second innings ending the innings Tied game
Illustration 52
Page 77 of 106 Harrison Cricket Apps © ODI Users Guide
Team Two
Second Tab Second innings ending the innings Tied game Continue to enter the score at the end of every over up until the end of over 50.
1. With the Auto Calculate function set to on overs are updated automatically provided either the Runs or Wickets combo boxes are updated.
2. The following information will be displayed for a comparison for Team One. This information will be displayed in Team One’s colours refer to Table 29 and Illustration 53 below.
Comparison Score 338 – 5 Comparison run rate 6.76 Comparison Last five 50 – 0 Comparison Last five run rate 10.00
Table 29
3. The following information will be displayed for Team Two refer to Table 30 and Illustration 53 below.
Score 338 – 7 Run rate 6.76 Last five 36 – 2 Last five run rate 7.20
Table 30
Page 78 of 106 Harrison Cricket Apps © ODI Users Guide
Team Two Second Tab Second innings ending the innings Tied game
Illustration 53
Page 79 of 106 Harrison Cricket Apps © ODI Users Guide
Team Two
Comparison Tab Second innings ending the innings Tied game Continue to enter the score every 10 overs up until the end of over 50. For this example runs will be set to 338, wickets will be set to 7, overs will be set to 50.
1. Click on or Tap the Comparison Tab.
2. Enter the scores into the Fifty overs group box combo boxes.
3. Click on or tap the Comparison Calculate button. This action will calculate and display the following information at the end of over 50 refer to Table 31 and Illustration 54 below.
Progressive run rate 6.76 Required run rate 0.00 Comparison score 71 – 2 Comparison overs 10 Comparison run rate 7.10
Table 31
Illustration 54
Page 80 of 106 Harrison Cricket Apps © ODI Users Guide
Team Two
Second innings graphs Tied game
Manhattan graph Innings graph
Illustration 55 Run Rate graph Bar graph
Page 81 of 106 Harrison Cricket Apps © ODI Users Guide
Last Game IMPORTANT: Do not enter any scores into the Scores Tab First innings combo boxes and then click or tap on the calculate button . This will over write all score entries and the Last Game will be lost.
1. If for any reason it is required to close the App and then resume using the App at later date.
2. The App has the built in functionality to reload the scores from the Last Game.
3. If Last Game is to be reloaded click on or tap the Last Game button refer to
Illustration 68 below.
4. The App will be disabled while message box 9 appears so no score can be entered or another button clicked on or tapped.
5. Click on or tap the OK button to reload the Last Game and enable the App.
6. The scores will be entered into all the combo boxes for the following Tabs.
1) Scores Tab 2) First Tab 3) Second Tab 4) Comparison Tab
7. As each Tab is clicked on or taped on the Tabs are automatically calculated
there is no need to click on or tap the calculate button refer to Illustrations 56 below.
Scores Tab First innings combo boxes with no scores entered
Illustration 56
Page 82 of 106 Harrison Cricket Apps © ODI Users Guide
Last Game IMPORTANT: Do not enter any scores into the Scores Tab First innings combo boxes and then click or tap on the calculate button . This will over write all score entries and the Last Game will be lost.
Illustration 57
Illustration 58 Illustrations 57 and 58 are two examples of Last Game being used at two different stages of a game.
Page 83 of 106 Harrison Cricket Apps © ODI Users Guide
Revised target and overs
First innings delays ODI games can have their allotted overs reduced as a result of time delays, for example interrupted by rain, power fail to lights etc. A minimum of twenty overs per team constitutes a game. This user’s guide covers three events that can result in overs being reduced in the First innings of an ODI game. One, two or all three of these events may occur in the First innings they are as follows.
1. A time delay before the game starts with no further delays once the game has started.
2. A time delay after the First innings has started with no further delays once the game has recommenced.
3. A time delay after at least twenty overs are completed and the time delay is
significant in duration so the First innings is Abounded. Recommendation: When using The App for the first five times only use it in conjunction with ODI games where there is no time delay for ease of use.
Page 84 of 106 Harrison Cricket Apps © ODI Users Guide
Revised target and overs First innings delays Scores Tab Event 1 A time delay before the game starts with no further delays once the game has started. For this example a time delay sufficient to cause the loss of 30 overs for the entire game will be used. Therefore Team One and Team Two will have their allotted overs reduced to 35 overs each at the start of the game. To set Allotted overs to 35 for Team One and Team Two do the following.
1. Click on or tap the Allotted overs combo box and scroll up to 35 overs.
2. Click on or tap the Calculate button to reset the App.
3. With allotted overs set to 35 and no further time delays the Scores Tab requires no further adjustment for the duration of the First Innings.
4. Any attempt to set First innings overs greater than the Allotted overs will result in the First innings overs being reset to the same amount as the Allotted overs automatically. This applies to the First Tab and the Comparison tab as well refer to Illustration 59 below.
Illustration 59 Allotted overs set to 35
Page 85 of 106 Harrison Cricket Apps © ODI Users Guide
Revised target and overs First innings delays First Tab Event 1 With no further time delays the First Tab requires no adjustment. Comparison Tab Event 1 With no further time delays the Comparison Tab requires no adjustment. Using the App Event 1 With the Scores Tab adjusted return to Team One’s section of the user’s guide on page 21.
Page 86 of 106 Harrison Cricket Apps © ODI Users Guide
Revised target and overs First innings delays Scores Tab Event 2 A time delay after the First innings has started with no further delays once the game has recommenced. For this example a time delay sufficient to cause the loss of 30 overs for the entire game will be used. Therefore Team One and Team Two will have their allotted overs reduced to 35 overs each once the game has recommenced. To set Allotted overs to 35 for Team One and Team Two do the following.
1. Click on or tap the Allotted overs combo box and scroll up to 35 overs.
2. Click on or tap the Calculate button to reset the App.
3. With allotted overs set to 35 and no further time delays the Scores Tab requires no further adjustment for the duration of the First Innings.
4. Any attempt to set First innings overs greater than the Allotted overs will result in the First innings overs being reset to the same amount as the Allotted overs automatically. This applies to the First Tab and the Comparison tab as well refer to Illustration 60 below.
Illustration 60 Allotted overs set to 35
Page 87 of 106 Harrison Cricket Apps © ODI Users Guide
Revised target and overs First innings delays First Tab Event 2 With no further time delays the First Tab requires no adjustment. Comparison Tab Event 2 With no further time delays the Comparison Tab requires no adjustment. Using the App Event 2 With the Scores Tab adjusted return to Team One’s section of the user’s guide on page 21.
Page 88 of 106 Harrison Cricket Apps © ODI Users Guide
Revised target and overs First innings delays Scores Tab Event 3 A time delay after at least twenty overs are completed and the time delay is significant in duration so the First innings is Abounded. For this example a time delay starting at 35 overs 3 balls and continuing in duration to cause the First innings to be Abounded. Illustration 61 below displays the First Innings score at 35 overs 3 balls before the time delay. To readjust the App refer to page 89.
Illustration 61
Page 89 of 106 Harrison Cricket Apps © ODI Users Guide
Revised target and overs First innings delays Scores Tab Event 3 To readjust the App do the following.
1. Click on or tap the First innings combo box and scroll down to display Abounded.
2. Click on or tap the Calculate button to readjust the App.
3. With the First innings declared Abounded Team Two’s Second innings combo
boxes will now be visible refer to Illustration 62 below.
4. To set Team Two’s Revised target and overs go to the Setting Revised target and overs section of this user’s guide page 93.
Illustration 62 First innings combo box set to Abounded
Page 90 of 106 Harrison Cricket Apps © ODI Users Guide
Revised target and overs First innings delays First Tab Event 3 With the First innings Abounded at 35 overs 3 balls.
1. No score entries will be allowed in the Runs and Wickets combo boxes for the last 14 overs contained within the Forty and Fifty overs group boxes. This applies to both the First and Second tabs.
2. The Overs combo box will automatically be set to the end of the over which in
this case will be 36 overs refer to Illustration 63 below. Overs combo box set to 36
Illustration 63 No score entries in the last 14 overs
Page 91 of 106 Harrison Cricket Apps © ODI Users Guide
Revised target and overs First innings delays With the First innings Abounded. The Second Tab and Team Two’s Second innings combo boxes will now be visible refer to Illustration 64 below. Second Tab and Second innings combo boxes visible
Illustration 64
Page 92 of 106 Harrison Cricket Apps © ODI Users Guide
Revised target and overs First innings delays Comparison Tab Event 3 With the First innings Abounded at 35 overs 3 balls.
1. The Overs combo box within the Forty overs group box will not be allowed to exceed 36 overs refer to Illustration 65 below.
2. With the First innings Abounded. Team Two’s Second innings combo boxes
will now be visible refer to Illustration 65 below.
Overs set to 36
Illustration 65 below
Page 93 of 106 Harrison Cricket Apps © ODI Users Guide
Revised target and overs
Second innings Setting Revised target and overs When the game recommences after the time delay the commentary team for the broadcaster will inform viewers of the Revised target and overs. There are numerous web sites with this information. For this example Revised target will be set at 194 runs and overs will be set at 28 to readjust the App do the following.
1. Click on or tap the Target combo box and scroll down to 194.
2. Click on or tap the Overs combo box and scroll down to 28.
3. Click on or tap the Calculate button to reset the App.
4. With the Revised target and overs entered and calculated Team Two’s run chase information will be displayed refer to Illustration 66 below.
5. With the Scores Tab readjusted go to Team Two’s section of the user’s guide
on page 48.
Illustration 66 Target combo box set to 194 Overs combo box set to 28
Page 94 of 106 Harrison Cricket Apps © ODI Users Guide
Revised target and overs
Second innings delays ODI games can have their allotted overs reduced as a result of time delays, for example interrupted by rain, power fail to lights etc. A minimum of twenty overs per team constitutes a game. This user’s guide covers three events that can result in overs being reduced in the Second innings of an ODI game. One, two or all three of these events may occur in the Second innings they are as follows.
1. A time delay before the Second innings starts with no further delays once the Second innings has started.
2. A time delay after the Second innings has started with no further delays once the Second innings has recommenced.
3. A time delay after at least twenty overs are completed and the time delay is
significant in duration so the Second innings is Abounded. Recommendation: When using The App for the first five times only use it in conjunction with ODI games where there is no time delay for ease of use.
Page 95 of 106 Harrison Cricket Apps © ODI Users Guide
Revised target and overs Second innings delays Scores Tab Event 1 A time delay before the Second innings starts with no further delays once the Second innings has started. Note: Do not readjust Allotted overs within the Game settings group box. For this example a time delay sufficient to cause the loss of 15 overs for the Second innings will be used. When the game recommences after the time delay the commentary team for the broadcaster will inform viewers of the Revised target and overs. There are numerous web sites with this information. For this example Revised target will be set at 242 runs and overs will be set at 35 to readjust the App do the following.
1. Click on or tap the Target combo box and scroll down to 242.
2. Click on or tap the Overs combo box and scroll down to 35.
3. Click on or tap the Calculate button to reset the App refer to Illustration 67 below.
Allotted overs do not readjust
Illustration 67 Target combo box set to 242 Overs combo box set to 35
Page 96 of 106 Harrison Cricket Apps © ODI Users Guide
Revised target and overs Second innings delays Second Tab Event 1 With no further time delays the Second Tab requires no adjustment. Comparison Tab Event 1 With no further time delays the Comparison Tab requires no adjustment. Using the App Event 1 With the Scores Tab adjusted return to Team Two’s section of the user’s guide on page 48.
Page 97 of 106 Harrison Cricket Apps © ODI Users Guide
Revised target and overs Second innings delays Scores Tab Event 2 A time delay after the Second innings has started with no further delays once the Second innings has recommenced. Note: Do not readjust Allotted overs within the Game settings group box. For this example a time delay sufficient to cause the loss of 15 overs for the Second innings will be used. When the game recommences after the time delay the commentary team for the broadcaster will inform viewers of the Revised target and overs. There are numerous web sites with this information. For this example Revised target will be set at 242 runs and overs will be set at 35 to readjust the App do the following.
1. Click on or tap the Target combo box and scroll down to 242.
2. Click on or tap the Overs combo box and scroll down to 35.
3. Click on or tap the Calculate button to reset the App refer to Illustration 68 below.
Illustration 68 Target combo box set to 242 Overs combo box set to 35
Page 98 of 106 Harrison Cricket Apps © ODI Users Guide
Revised target and overs Second innings delays Second Tab Event 2 With no further time delays the Second Tab requires no adjustment. Comparison Tab Event 2 With no further time delays the Comparison Tab requires no adjustment. Using the App Event 2 With the Scores Tab adjusted return to Team Two’s section of the user’s guide on page 48.
Page 99 of 106 Harrison Cricket Apps © ODI Users Guide
Revised target and overs Second innings delays Scores Tab Event 3 A time delay after at least twenty overs are completed and the time delay is significant in duration so the Second innings is Abounded. Note: Do not readjust Allotted overs within the Game settings group box. When the game recommences after the time delay the commentary team for the broadcaster will inform viewers of the Revised target and overs. There are numerous web sites with this information. For this example Revised target will be set at 185 runs and overs will be set at 28 to readjust the App do the following.
1. Click on or tap the Target combo box and scroll down to 185.
2. Click on or tap the Overs combo box and scroll down to 28.
3. Click on or tap the Second innings combo box and scroll down to display Abounded.
4. Click on or tap the Calculate button to reset the App.
5. With the Second innings Abounded the Second innings Overs combo box will
automatically bet set to the same amount of overs as the Revised overs combo box refer to Illustration 69 below.
Second innings Overs combo box
Illustration 69 Target combo box set to 185 Overs combo box set to 28
Page 100 of 106 Harrison Cricket Apps © ODI Users Guide
Revised target and overs Second innings delays Second Tab Event 3
1. With the Second innings Abounded the Second Tab overs combo box will automatically bet set to the same amount of overs as the Revised overs combo box.
2. Update the 28th over Runs and Wickets combo boxes if not already done.
3. No score entries will be permitted from overs 29 to 50 they will be automatically cleared when the calculate button is clicked on or tapped refer to Illustration 70 below.
Second Tab Overs combo box
Illustration 70
Page 101 of 106 Harrison Cricket Apps © ODI Users Guide
Revised target and overs Second innings delays Comparison Tab Event 3 With the Second innings Abounded the Comparison Tab Thirty overs group box overs combo box will not be allowed to be greater than the amount of overs as the Revised overs combo box (28) when the calculate button is clicked on or tapped refer to Illustration 71 below. Thirty overs group box
Illustration 71 Overs combo box
Page 102 of 106 Harrison Cricket Apps © ODI Users Guide
Trouble shooting
Full Allotted overs Enter Team Tab Problem Causes Reference pages Team One’s name is not displayed in the preview area after the update button is clicked on or tapped
Team One’s back colour and fore colour have not been set and updated
8,9 & 10
Team Two’s name is not displayed in the preview area after the update button is clicked on or tapped
Team Two’s back colour and fore colour have not been set and updated
12
Scores Tab Problem Causes Reference pages Scores Tab will not display Team One and or Team
Two names, back colour and fore colour have not been set and updated
Team One 8,9 &10 Team Two 12
Information will not display after calculate button is clicked on or tapped
Scores Tab First innings overs are still set to zero
25 & 26
Team Two’s Run chase information will not display at the end of Team One’s innings
First innings overs not set to 50 If Team One is bowled out wickets not set to 10
36 & 37 42 & 43
First Tab Problem Causes Reference pages First Tab will not display Scores Tab First innings
overs are still set to zero 25 & 26
Information will not display after calculate button is clicked on or tapped
First Tab First innings Overs are still set to zero
27
Page 103 of 106 Harrison Cricket Apps © ODI Users Guide
Trouble shooting Full Allotted overs Second Tab Problem Causes Reference pages Second Tab will not display First Tab overs not set to 50
If Team One is bowled out wickets not set to 10
38 & 39 44 & 45
Information will not display after calculate button is clicked on or tapped
Second Tab First innings Overs are still set to zero
48
Comparison Tab Problem Causes Reference pages Comparison Tab will not display
Scores Tab First innings overs are still set to zero
25 & 26
First innings information will not display after calculate button is clicked on or tapped
Comparison Tab First innings Ten overs group box overs still set to zero
32 & 33
Second innings group boxes will not display
Comparison Tab First innings Fifty overs group box overs not set to 50 If Team One is bowled out wickets not set to 10
40 & 41 46 & 47
Second innings information will not display after calculate button is clicked on or tapped
Overs are still set to zero 48
Page 104 of 106 Harrison Cricket Apps © ODI Users Guide
Trouble shooting
Graphs Problem Causes Reference pages Manhattan will not display First Tab overs are still set
to zero 27
Manhattan Second innings graph will not display
First Tab overs not set to 50 If Team One is bowled out wickets not set to 10 Second Tab overs are still set to zero
38 & 39 44 & 45 48
Innings will not display First Tab overs are still set to zero
27
Innings Second innings graph will not display
First Tab overs not set to 50 If Team One is bowled out wickets not set to 10 Second Tab overs are still set to zero
38 & 39 44 & 45 48
Run Rate will not display First Tab overs are still set to zero
27
Run Rate Second innings graph will not display
First Tab overs not set to 50 If Team One is bowled out wickets not set to 10 Second Tab overs are still set to zero
38 & 39 44 & 45 48
Bar Graph will not display Comparison Tab First innings Ten overs group box overs still set to zero
32 & 33
Bar Graph Second innings graph will not display
Comparison Tab First innings Fifty overs group box overs not set to 50 If Team One is bowled out wickets not set to 10
40 & 41 46 & 47
Page 105 of 106 Harrison Cricket Apps © ODI Users Guide
Trouble shooting
Revised target and overs First innings ODI games can have their allotted overs reduced as a result of time delays, for example interrupted by rain, power fail to lights etc. A minimum of twenty overs per team constitutes a game. This user’s guide covers three events that can result in overs being reduced in the First innings of an ODI game. One, two or all three of these events may occur in the First innings they are as follows.
1. A time delay before the game starts with no further delays once the game has started.
2. A time delay after the First innings has started with no further delays once the game has recommenced.
3. A time delay after at least twenty overs are completed and the time delay is
significant in duration so the First innings is Abounded. Scores Tab Event 1 Problem Causes Reference pages Not displaying correct information
Allotted overs not readjusted 84
Second innings Run chase information will not display at end First innings
Allotted overs not readjusted First innings overs not equal to readjusted Allotted overs
84 84 & 85
Scores Tab Event 2 Problem Causes Reference pages Not displaying correct information
Allotted overs not readjusted 84
Second innings Run chase information will not display at end First innings
Allotted overs not readjusted First innings overs not equal to readjusted Allotted overs
84 84 & 85
Scores Tab Event 3 Problem Causes Reference pages Second innings combo boxes will not display after First innings Abounded
First innings combo box not set to Abounded and the Calculate button clicked on or tapped
88 & 89
Second innings Run chase information will not display at end First innings
Revised target and overs not set and the Calculate button clicked on or tapped
93
Page 106 of 106 Harrison Cricket Apps © ODI Users Guide
Trouble shooting
Revised target and overs Second innings ODI games can have their allotted overs reduced as a result of time delays, for example interrupted by rain, power fail to lights etc. A minimum of twenty overs per team constitutes a game This user’s guide covers three events that can result in overs being reduced in the Second innings of an ODI game. One, two or all three of these events may occur in the Second innings they are as follows.
1. A time delay before the Second innings starts with no further delays once the Second innings has started.
2. A time delay after the Second innings has started with no further delays once the Second innings has recommenced.
3. A time delay after at least twenty overs are completed and the time delay is
significant in duration so the Second innings is Abounded. Scores Tab Event 1 Problem Causes Reference pages Not displaying correct information
Revised target and overs not set and the Calculate button clicked on or tapped
95 & 96
Scores Tab Event 2 Problem Causes Reference pages Not displaying correct information
Revised target and overs not set and the Calculate button clicked on or tapped
97 & 98
Scores Tab Event 3 Problem Causes Reference pages Not displaying correct information
Revised target and overs not set and the Calculate button clicked on or tapped
99 & 100
Note: If the above problems are solved correctly there should not be any problems in the Second Tab and Comparison Tab.