Post on 07-Feb-2018
DISTRIBUTED BY:
GGGlllooobbbaaalll ––– FFFllleeexxx MMMfffggg...Hose AssembliesMade to order: Stainless steel,Bronze, and TeflonAny length & end configurationTested and CertifiedShip one to two days, A.R.O.
Expansion JointsRubber Sphere NeopreneRubber Sphere EPDMHand Built (made in USA)Bellow, Controlled Flexing
Multi-Ply Stainless SteelFixed FlangedVanstone Flanged and TiedWeld EndsExotic Metals Capability
Externally PressurizedExpansion JointsSteam ApplicationsAxial Movements 4 & 8 inchesSingle and DualSteam
Office: (530) 229-1320Fax: (530) 229-1329Toll Free: (877) 297-4673
Pump ConnectorsStainless Steel Pump Connectors:
Flange, MPT, Grooved, Weld-EndRubber Pump Connectors,
Sphere Neoprene,Sphere EPDM
Expansion Compensator
Seismic ConnectorsFlanged, Male Pipe, Grooved,
Stainless Steel, BronzeMovements up to 4inches
Flu-Duct JointsMetal, Composite & Rubber
Rectangular & RoundOperating Temperatures to 1800º F
AccessoriesControl rodsPipe Guides
Safety ShieldsBack up Rings
Global – Flex Mfg.1244 Redwood Blvd.Redding, CA 96003
Toll Free: (877) 297-4673Fax: (530) 229-1329
GGGlllooobbbaaalll --- FFFllleeexxx MMMfffggg...
1244 Redwood Blvd. Redding, CA 96003
(530) 229-1320Toll Free: (877) 297-4673
Fax: (530) 229-1329
www.globalflexmfg.comEmail: info@globalflexmfg.com
HVAC Price Sheets 1Style# SN 2Style# SE 3Style# DN 4Style# DE 5Style# UN 6Style# 664-10 7Style# MDR 8Style# PM 9Style# PML 10Style# PF 11Style# PG 12Style# PGF 13Style# SNR 14Style# BS 15Style# SB 16Style# BM 17Style# BV 18Style# EJEP 19Style# PB 20Style# PB-R 21Style# CM 22Style# CS 23Style# SC-B-SWT 24Style# SC-FLG 25Style# S-GVD 26Style# SC-MPT 27
Metal Hose Product Line 29Style SN Data Sheet 30Style UN Data Sheet 31UNHP Data Sheet 32Fittings 33Special Hose Assemblies Fabrication 34Selecting Metal Hose 35Installation Information 36-37Working Pressure Derating Factor 38Offset Chart 39GFSS/GFG Information Sheet 40Air Flex Pipe 41Metal Expansion Joint Products 43 - 44Bellows Style Expansion Joint MEJ 45ExternallyPressurizedExpansionJointsEJEP 46
GGGlllooobbbaaalll --- FFFllleeexxx MMMfffggg...1244 Redwood Blvd. Redding, CA 96003
TABLE OF CONTENTS
www.globalflexmfg.com (530) 229-1320 Toll Free: (877) 297-4673 Fax: (530) 229-1329 email: info@globalflexmfg.com
Expansion Compensators CM CMS 47Bellows Pump Connectors PB & PBR 48Pipe Alignment Guides, Series PG 49-50Expansion Joints Description & Applications: 51Series 673-4700 52Series SNR-FLG 54Series 673-40 53Series 673-40-L 55Series 673-11 58Series 673-1100S 59Series 673-12 60Series 673-1500 61PGF-0000 (673-4500) 57PG-0000 (673-5500) 56661-1100 EPDM Single 63661-2100 EPDM Double 62661-3100 EPDM Bellow 64661-1000 Neoprene Single 65661-2000 Neoprene Double 66661-3000 Neoprene Bellow 67Style MDR Molded Rubber 68664-1000 Control Units 69660-4710 Bellows Pump Connector 70660-4720 Bellows Pump Connector 71EJEP 4” & 8” Axial Travel 72660-5000 Expansion Compensator MPT 73660-5100 Expansion Compensator 74Multi-Ply Stainless Steel Bellows 75Seismic Connectors 76 - 87
SC-21-2-CSMPT 2” Motion 79SC-21-3-CSMPT 3” Motion 80SC-21-4-CSMPT 4” Motion 81SC-21-2-CSFLG 2” Motion 76SC-21-3-CSFLG 3” Motion 77SC-21-4-CSFLG 4” Motion 78SC-21-2-CSGVD 2” Motion 82SC-21-3-CSGVD 3” Motion 83SC-21-4-CSGVD 4” Motion 84SC-11-2-Brn Sweat 2” Motion 85SC-11-3-Brn Sweat 3” Motion 86SC-11-4-Brn Sweat 4” Motion 87
STOCKING LOCATIONS
Global -Flex Mfg.1244 Redwood Blvd.Redding, CA 96003
Toll Free: (877) 297-4673Fax: (530) 229-1329
GGGlllooobbbaaalll --- FFFllleeexxx MMMfffggg... PRICE LIST3-25-2002
1
PRODUCT PAGESN – Rubber Sphere Single Neoprene 2SE – Rubber Sphere Single EPDM 3DN – Rubber Sphere Double Neoprene 4DE – Rubber Sphere Double EPDM 5UN – Rubber Sphere Triple Union Neoprene 6CR – Control Units 7MDR – RJ Molded Rubber 8PM – Stainless Steel MPT 9PML – Stainless Steel MPT Long 10PF – Stainless Steel Flanged 11PG – Stainless Steel Grooved 12PGF – Stainless Steel Grooved x Flange 13SNR – Stainless Steel Flanged Reducer 14BS – Bronze Sweat 15SB – Stainless Steel Hose Pump Connector Bronze Sweat Ends 16BM – Bronze MPT 17BV – Bronze Vib (Sweat) 18EJEP – Externally Pressurized Expansion Joint 19PB – Multi-Ply Bellows 20PB-R – Multi-Ply Bellows Long 21CM – Compensator MPT 22CS – Compensator Sweat 23SC-B-SWT – Seismic Connector Bronze Sweat 24SC-FLG – Seismic Connector Flange 25SC-GVD – Seismic Connector Grooved 26SC-MPT – Seismic MPT 27
Price Sheets
STOCKING LOCATIONS
Global -Flex Mfg.1244 Redwood Blvd.Redding, CA 96003
Toll Free: (877) 297-4673Fax: (530) 229-1329
GGGlllooobbbaaalll --- FFFllleeexxx MMMfffggg... PRICE LIST3-25-2002
2
Single Sphere RubberExpansion Joint Neoprene
PartNumber
ComputerNumber
SizeInches
ListPrice
SN-150 661-1001 1-1/2 x 6 FF $ 45.00SN-200 661-1002 2 x 6 FF $ 51.00SN-250 661-1003 2-1/2 x 6 FF $ 66.00SN-300 661-1004 3 x 6 FF $ 76.50SN-400 661-1005 4 x 6 FF $ 94.50SN-500 661-1006 5 x 6 FF $ 112.50SN-600 661-1007 6 x 6 FF $ 151.50SN-800 661-1008 8 x 6 FF $ 213.00SN-1000 661-1009 10 x 8 FF $ 312.00SN-1200 661-1010 12 x 8 FF $ 405.00SN-1400 661-1011 14 x 8 FF $ 609.00SN-1600 661-1012 16 x 8 FF $ 734.00SN-1800 661-1013 18 x 8 FF $ 888.00SN-2000 661-1014 20 x 8 FF $ 1,029.00
CROSS REFERENCEMason MFNCMetraflex Metrasphere Style RProco 240-AV/NNUnisource U-301
STYLE# SN
STOCKING LOCATIONS
Global -Flex Mfg.1244 Redwood Blvd.Redding, CA 96003
Toll Free: (877) 297-4673Fax: (530) 229-1329
GGGlllooobbbaaalll --- FFFllleeexxx MMMfffggg... PRICE LIST3-25-2002
3
Single Sphere Rubber Expansion JointEPDM
PartNumber
ComputerNumber
SizeInches
ListPrice
SE-150 661-1101 1-1/2 x 6 $ 49.50SE-200 661-1102 2 x 6 $ 60.00SE-250 661-1103 2-1/2 x 6 $ 80.25SE-300 661-1104 3 x 6 $ 91.50SE-400 661-1105 4 x 6 $ 112.50SE-500 661-1106 5 x 6 $ 138.00SE-600 661-1107 6 x 6 $ 180.00SE-800 661-1108 8 x 6 $ 255.00SE-1000 661-1109 10 x 8 $ 381.00SE-1200 661-1110 12 x 8 $ 531.00
CROSS REFERENCEMason MFNCMetraflex Metrasphere Style RProco 240-AV/NNUnisource U-301
STYLE# SE
STOCKING LOCATIONS
Global -Flex Mfg.1244 Redwood Blvd.Redding, CA 96003
Toll Free: (877) 297-4673Fax: (530) 229-1329
GGGlllooobbbaaalll --- FFFllleeexxx MMMfffggg... PRICE LIST3-25-2002
4
PartNumber
ComputerNumber
SizeInches
ListPrice
DN-150 661-2001 1-1/2 X 7 $ 61.50DN-200 661-2002 2 X 7 $ 61.50DN-250 661-2003 2-1/2 X 7 $ 78.00DN-300 661-2004 3 X 7 $ 90.75DN-400 661-2005 4 X 9 $ 124.50DN-500 661-2006 5 X 9 $ 147.00DN-600 661-2007 6 X 9 $ 204.00DN-800 661-2008 8 X 13 $ 291.00DN-1000 661-2009 10 X 13 $ 387.00DN-1200 661-2010 12 X 13 $ 562.50
Double Sphere Expansion JointNeoprene
CROSS REFERENCEMason MFTNCMetraflex Twin sphereProco 242-NNUnisource U-302
STYLE# DN
STOCKING LOCATIONS
Global -Flex Mfg.1244 Redwood Blvd.Redding, CA 96003
Toll Free: (877) 297-4673Fax: (530) 229-1329
GGGlllooobbbaaalll --- FFFllleeexxx MMMfffggg... PRICE LIST3-25-2002
5
PartNumberEPDM
PartNumberEPDM
SizeInches
PriceEPDM
DE-150 661-2101 1-1/2 X 7 $ 61.50DE-200 661-2102 2 X 7 $ 61.50DE-250 661-2103 2-1/2 X 7 $ 81.00DE-300 661-2104 3 X 7 $ 96.00DE-400 661-2105 4 X 9 $ 133.50DE-500 661-2106 5 X 9 $ 162.00DE-600 661-2107 6 X 9 $ 213.00DE-800 661-2108 8 X 13 $ 321.00DE-1000 661-2109 10 X 13 $ 438.00DE-1200 661-2110 12 X 13 $ 597.00
Double Sphere Expansion JointEPDM
CROSS REFERENCEMason MFTNCMetraflex Twin sphereProco 242-NNUnisource U-302
STYLE# DE
STOCKING LOCATIONS
Global -Flex Mfg.1244 Redwood Blvd.Redding, CA 96003
Toll Free: (877) 297-4673Fax: (530) 229-1329
GGGlllooobbbaaalll --- FFFllleeexxx MMMfffggg... PRICE LIST3-25-2002
6
PartNumber
ComputerNumber
SizeInches
PriceList
UN-075 661-3001 3/4 X 8 $ 31.50UN-100 661-3002 1 X 8 $ 39.00UN-125 661-3003 1-1/4 X 8 $ 42.00UN-150 661-3004 1-1/2 X8 $ 54.75UN-200 661-3005 2 X 8 $ 69.00UN-250 661-3006 2-1/2 X 8 $ 93.00UN-300 661-3007 3 X 8 $ 135.00
Double Union ConnectorNeoprene
Cross ReferenceMason MFTFUMetraflex Double Sphere Union ConnectorProco 315-A/NNUnisource U-303
STYLE# UN
STOCKING LOCATIONS
Global -Flex Mfg.1244 Redwood Blvd.Redding, CA 96003
Toll Free: (877) 297-4673Fax: (530) 229-1329
GGGlllooobbbaaalll --- FFFllleeexxx MMMfffggg... PRICE LIST3-25-2002
7
PartNumber
SizeInches
ListPrice
664-1001 1-1/2 X 6 $ 66.00664-1002 2 X 6 $ 66.00664-1003 2-1/2 X 6 $ 66.00664-1004 3 X 6 $ 66.00664-1005 4 X 6 $ 52.00664-1006 5 X 6 $ 52.00664-1007 6 X 6 $ 75.60664-1008 8 X 6 $ 93.24664-1009 10 X 8 $ 102.06664-1010 12 X 8 $ 112.14664-1011 14 X 8 $ 140.25664-1012 16 X 8 $ 163.35664-1013 18 X 8 $ 177.75664-1014 20 X 8 $ 237.00
Control Units SingleSTYLE# 664-10
CROSS REFERENCEUnisource Rods
STOCKING LOCATIONS
Global -Flex Mfg.1244 Redwood Blvd.Redding, CA 96003
Toll Free: (877) 297-4673Fax: (530) 229-1329
GGGlllooobbbaaalll --- FFFllleeexxx MMMfffggg... PRICE LIST3-25-2002
8
Molded RubberExpansion Joint
PartNumber
SizeInches
ListPriceEPDM
ListPriceNitrile
List PriceBack UpRings Set
MDR-200 2 X 6 FF $ 138.00 $ 147.00 $ 19.08MDR-250 2-1/2 X 6 FF $ 168.00 $ 177.00 $ 25.44MDR-300 3 X 6 FF $ 198.00 $ 210.00 $ 28.62MDR-400 4 X 6 FF $ 258.00 $ 273.00 $ 38.16MDR-500 5 X 6 FF $ 288.00 $ 303.00 $ 42.99MDR-600 6 X 6 FF $ 330.00 $ 348.00 $ 50.88MDR-800 8 X 6 FF $ 438.00 $ 462.00 $ 69.96MDR-1000 10 X 8 FF $ 618.00 $ 651.00 $ 89.04MDR-1200 12 X 8 FF $ 741.00 $ 780.00 $ 114.00
CROSS REFERENCEUnaflex Series 1000
STYLE# MDR
STOCKING LOCATIONS
Global -Flex Mfg.1244 Redwood Blvd.Redding, CA 96003
Toll Free: (877) 297-4673Fax: (530) 229-1329
GGGlllooobbbaaalll --- FFFllleeexxx MMMfffggg... PRICE LIST3-25-2002
9
Stainless Steel Pump ConnectorsCarbon Steel MPT
PartNumber
ComputerNumber
SizeInches
PriceList
PM-050 673-4001 1/2 X 6-1/2 FF $ 18.00PM-075 673-4002 3/4 X 7 FF $ 21.00PM-100 673-4003 1 X 8 FF $ 25.50PM-125 673-4004 1-1/4 X 8 1/2 FF $ 33.00PM-150 673-4005 1-1/2 X 9 FF $ 36.00PM-200 673-4006 2 X 10-1/2 FF $ 43.50PM-250 673-4007 2-1/2 X 12 FF $ 69.00PM-300 673-4008 3 X 14 FF $ 84.00PM-400 673-4009 4 X 16 FF $ 96.00
Cross ReferenceMason/Mercer Style BSS PC-MNFlex Metal Hose MFC SeriesAmber Booth SS-PMUnisource UPCS-MMTSenior Flexonics PCS-MMT
STYLE# PM
STOCKING LOCATIONS
Global -Flex Mfg.1244 Redwood Blvd.Redding, CA 96003
Toll Free: (877) 297-4673Fax: (530) 229-1329
GGGlllooobbbaaalll --- FFFllleeexxx MMMfffggg... PRICE LIST3-25-2002
10
Stainless Steel Pump ConnectorsCarbon Steel MPT-Long
PartNumber
ComputerNumber
SizeInches
PriceList
PML-050 673-4101 1/2 X 10 FF $ 22.86PML-075 673-4102 3/4 X 11 FF $ 25.38PML-100 673-4103 1 X 12 FF $ 32.92PML-125 673-4104 1-1/4 X 13 FF $ 42.74PML-150 673-4105 1-1/2 X 14 FF $ 48.00PML-200 673-4106 2 X 15 FF $ 62.00
Cross ReferenceMason/Mercer Style BSS PC-MN-LFlex Metal Hose MFC-L SeriesAmber BoothUnisource UPCS-MMT-LSenior Flexonics
STYLE# PML
STOCKING LOCATIONS
Global -Flex Mfg.1244 Redwood Blvd.Redding, CA 96003
Toll Free: (877) 297-4673Fax: (530) 229-1329
GGGlllooobbbaaalll --- FFFllleeexxx MMMfffggg... PRICE LIST3-25-2002
11
PartNumber
ComputerNumber
SizeInches
PriceList
PF-150 673-4705 1-1/2 X 9 FF $ 51.00PF-200 673-4706 2 X 9 FF $ 66.00PF-250 673-4707 2-1/2 X 9 FF $ 81.00PF-300 673-4708 3 X 9 FF $ 96.00PF-400 673-4709 4 X 9 FF $ 120.00PF-500 673-4710 5 X 11 FF $ 168.00PF-600 673-4711 6 X 11 FF $ 204.00PF-800 673-4712 8 X 12 FF $ 405.00PF-1000 673-4713 10 X 13 FF $ 570.00PF-1200 673-4714 12 X 14 FF $ 837.00
Cross ReferenceMason Style BSS PC-RF-150Metraflex Metra MiniSenior Flexonics PCS-FLGAmber Booth SS-FPUnisource UPCS-FLG
Stainless Steel Pump ConnectorsCarbon Steel Plate FLGSTYLE# PF
STOCKING LOCATIONS
Global -Flex Mfg.1244 Redwood Blvd.Redding, CA 96003
Toll Free: (877) 297-4673Fax: (530) 229-1329
GGGlllooobbbaaalll --- FFFllleeexxx MMMfffggg... PRICE LIST3-25-2002
12
Stainless Steel PumpConnector Carbon Steel Grooved
PartNumber
ComputerNumber
SizeInches
PriceList
PG-200 673-5506 2 X 12 FF $ 76.95PG-250 673-5507 2-1/2 X 14 FF $ 90.89PG-300 673-5508 3 X 14 FF $ 99.10PG-400 673-5509 4 X 15 FF $ 133.76PG-500 673-5510 5 X 16 FF $ 192.45PG-600 673-5511 6 X 16 FF $ 229.67PG-800 673-5512 8 X 17 FF $ 492.68PG-1000 673-5513 10 X 18 FF $ 479.40PG-1200 673-5514 12 X 19 FF $1,229.89
Cross ReferenceMetraflex Style GGUnisource UPCS-GG
STYLE# PG
STOCKING LOCATIONS
Global -Flex Mfg.1244 Redwood Blvd.Redding, CA 96003
Toll Free: (877) 297-4673Fax: (530) 229-1329
GGGlllooobbbaaalll --- FFFllleeexxx MMMfffggg... PRICE LIST3-25-2002
13
Stainless Steel PumpConnector Carbon Steel Grooved
PartNumber
ComputerNumber
SizeInches
PriceList
PGF-200 673-4506 2 X 12 FF $ 81.85PGF-250 673-4507 2-1/2 X 12 FF $ 98.02PGF-300 673-4508 3 X 13 FF $ 109.06PGF-400 673-4509 4 X 13 FF $ 147.76PGF-500 673-4510 5 X 14 FF $ 206.85PGF-600 673-4511 6 X 14 FF $ 250.34PGF-800 673-4512 8 X 15 FF $ 531.68PGF-1000 673-4513 10 X 16 FF $ 935.90PGF-1200 673-4514 12 X 17 FF $ 1,302.29
Cross ReferenceMetraflex Style GFUnisource UPCS-GF
STYLE# PGF
STOCKING LOCATIONS
Global -Flex Mfg.1244 Redwood Blvd.Redding, CA 96003
Toll Free: (877) 297-4673Fax: (530) 229-1329
GGGlllooobbbaaalll --- FFFllleeexxx MMMfffggg... PRICE LIST3-25-2002
14
Stainless Steel Hose AssemblyReducer Flanged
PartNumber
SizeInches
PriceList
SNR-250200 2-1/2 x 2 x 13 FF $ 100.62SNR-300200 3 x 2 x 13 FF $ 106.86SNR-300250 3 x 2-1/2 x 13 FF $ 106.86SNR-400200 4 x 2 x 13 FF $ 134.16SNR-400250 4 x 2 -1/2 x13 FF $ 134.94SNR-400300 4 x 3 x 13 FF $ 134.94SNR-500250 5 x 2-1/2 x 16 FF $ 213.72SNR-500300 5 x 3 x 16 FF $ 190.32SNR-500400 5 x 4 x 16 FF $ 190.32SNR-600300 6” x 3 x 17 FF $ 241.02SNR-600400 6 x 4 x 17 FF $ 234.00SNR-600500 6 x 5x 17 FF $ 235.56SNR-800400 8 x 4 X 18 FF $ 453.96SNR-800500 8 x 5 X 18 FF $ 472.68SNR-800600 8 x 6 X 18 FF $ 455.52SNR-1000600 10 x 6 x 18 FF $ 634.14SNR-1000800 10 x 8 x 18 FF $ 641.16SNR-12001000 12 X 10 x 20 FF $ 948.00
Cross ReferenceUnisource CRCPS
STYLE# SNR
*Available in Longer Lengths and with Eccentric Reducer.Call Global -Flex for pricing information
OAL in
STOCKING LOCATIONS
Global -Flex Mfg.1244 Redwood Blvd.Redding, CA 96003
Toll Free: (877) 297-4673Fax: (530) 229-1329
GGGlllooobbbaaalll --- FFFllleeexxx MMMfffggg... PRICE LIST3-25-2002
15
Bronze Pump ConnectorSweat Ends
PartNumber
ComputerNumber
SizeInches
PriceList
BS-050 673-1103 1/2 X 6-1/2 $ 18.72BS-075 673-1104 3/4 X 7 $ 27.09BS-100 673-1105 1 X 8 $ 32.31BS-125 673-1106 1-1/4 X 8-1/2 $ 46.32BS-150 673-1107 1-1/2 X 9 $ 56.01BS-200 673-1108 2 X 10-1/2 $ 81.45BS-250 673-1109 2-1/2 X 12 $ 165.24BS-300 673-1110 3 X 12 $ 202.60
Cross ReferenceMetraflex Style BBSMercer/Mason Style BBFSenior Flexonics PCB-BRSWUnisource UPCB-BRSW
STYLE# BS
STOCKING LOCATIONS
Global -Flex Mfg.1244 Redwood Blvd.Redding, CA 96003
Toll Free: (877) 297-4673Fax: (530) 229-1329
GGGlllooobbbaaalll --- FFFllleeexxx MMMfffggg... PRICE LIST3-25-2002
16
PartNumber
ComputerNumber
SizeInches
PriceList
SB-050 673-1103S 1/2 6-1/2 $ 17.78SB-075 673-1104S 3/4 X 7 $ 25.74SB-100 673-1105S 1 X 8 $ 30.69SB-125 673-1106S 1-1/4 X 8-1/2 $ 44.00SB-150 673-1007S 1-1/2 X 9 $ 53.21SB-200 673-1108S 2 X 10-1/2 $ 77.38SB-250 673-1109S 2-1/2 X 12 $ 156.98SB-300 673-1110S 3 X 12 $ 192.47
Cross Reference
Stainless Steel Hose PumpConnector
Bronze Sweat Ends
STYLE# SB
STOCKING LOCATIONS
Global -Flex Mfg.1244 Redwood Blvd.Redding, CA 96003
Toll Free: (877) 297-4673Fax: (530) 229-1329
GGGlllooobbbaaalll --- FFFllleeexxx MMMfffggg... PRICE LIST3-25-2002
17
Bronze Pump ConnectorsBronze MPT Ends
PartNumber
ComputerNumber
SizeInches
PriceList
BM-050 673-1203 1/2 X 6-1/2 $ 20.88BM-075 673-1204 3/4 X 7 $ 28.29BM-100 673-1205 1 X 8 $ 37.68BM-125 673-1206 1-1/4 X 8-1/2 $ 48.24BM-150 673-1207 1-1/2 X 9 $ 58.26BM-200 673-1208 2 X 10-1/2 $ 109.89
Cross ReferenceMason BBFMetraflex Style BBTSenior Flexonics PCB-BRMTUnisource UPCB-BRMP
STYLE# BM
STOCKING LOCATIONS
Global -Flex Mfg.1244 Redwood Blvd.Redding, CA 96003
Toll Free: (877) 297-4673Fax: (530) 229-1329
GGGlllooobbbaaalll --- FFFllleeexxx MMMfffggg... PRICE LIST3-25-2002
18
Bronze Vib – Female Copper SweatEach End
PartNumber
ComputerNumber
SizeInches
PriceList
BV-2 673-1502 1/4 X 7-1/2 to fit 1/4 OD tube $ 15.45BV-3 673-1503 3/8 X 8-1/4 to fit 3/8 OD tube $ 15.99BV-4 673-1504 3/8 X 9 to fit 1/2 OD tube $ 17.70BV-5 673-1505 1/2 X 9-3/4 to fit 5/8 OD tube $ 19.77BV-6 673-1506 1/2 X 10 to fit 3/4 OD tube $ 21.03BV-7 673-1507 3/4 X 11-1/4 to fit 3/4 OD tube $ 27.15BV-8 673-1508 3/4 X 11-1/2 to fit 7/8 OD tube $ 27.15BV-9 673-1509 1 X 13 to fit 1-1/8 OD tube $ 36.15BV-10 673-1510 1-1/4 X 14-3/4 to fit 1-3/8 OD tube $ 54.84BV-11 673-1511 1-1/2 X 17 to fit 1-5/8 OD tube $ 70.59BV-12 673-1512 2 X 20 to fit 2-1/8 OD tube $ 120.93BV-13 673-1513 2-1/2 X 24 to fit 2-5/8 OD tube $ 203.49BV-14 673-1514 3 X 27 to fit 3-1/3 OD tube $ 244.92BV-15 673-1515 3-1/2 X 32 to fit 3-5/8 OD tube $ 544.50BV-16 673-1516 4 X 33 to fit 4-1/8 OD tube $ 544.50
Cross ReferenceAnaconda FX,FYMetraflex RAFMercer Mason BBFUnisource VIB
STYLE# BV
STOCKING LOCATIONS
Global -Flex Mfg.1244 Redwood Blvd.Redding, CA 96003
Toll Free: (877) 297-4673Fax: (530) 229-1329
GGGlllooobbbaaalll --- FFFllleeexxx MMMfffggg... PRICE LIST3-25-2002
19
STYLE# EJEPExternally Pressurized Expansion
Joint 4” And 8” Axial Travel
PartNumber
SizeInches
PriceList W/E
PriceList FLG
EJEP-200-4 2 x 23.25 OAL $ 479.00 $ 522.78EJEP-250-4 2-1/2 x 23.25 OAL $ 514.80 $ 562.50EJEP-300-4 3 x 22.25 OAL $ 635.70 $ 685.98EJEP-400-4 4 x 22.75 OAL $ 783.90 $ 841.68EJEP-400-8 4 x 38.50 OAL $ 1,210.95 $ 1,268.73EJEP-600-4 6 x 21.50 OAL $ 900.90 $ 985.80EJEP-600-8 6 x 33.75 OAL $ 1,546.35 $ 1,631.25EJEP-800-4 8 x 22.50 OAL $ 1,187.55 $ 1,309.35EJEP-800-8 8 x 35.75 OAL $ 1,881.75 $ 2,003.55EJEP-1000-4 10 x 23.75 OAL $ 1.541.10 $ 1,677.30EJEP-1000-8 10 x 40.00 OAL $ 2,380.95 $ 2,517.15EJEP-1200-4 12 x 24.50 OAL $ 2,037.75 $ 2,261.37EJEP-1200-8 12 x 41.75 OAL $ 3,018.60 $ 3,242.22
Cross ReferenceHyspan Series 3500Microflex Style MXSSenior Flexonics Series SXUnisource EP
STOCKING LOCATIONS
Global -Flex Mfg.1244 Redwood Blvd.Redding, CA 96003
Toll Free: (877) 297-4673Fax: (530) 229-1329
GGGlllooobbbaaalll --- FFFllleeexxx MMMfffggg... PRICE LIST3-25-2002
20
Multi Ply Bellows Pump ConnectorsFlange and Tie Rods
PartNumber
ComputerNumber
SizeInches
PriceList
PB-200 660-4711 2 X 4-38 FF $ 180.00PB-250 660-4712 2-1/2 X 4-3/8 FF $ 216.00PB-300 660-4713 3 X 4-2/8 FF $ 246.00PB-400 660-4714 4 X 4-5/8 FF $ 324.00PB-500 660-4715 5 X 4-7/8 FF $ 435.00PB-600 660-4716 6 X 5 FF $ 486.00PB-800 660-4717 8 X 5-7/8 FF $ 714.00PB-1000 660-4718 10 X 6-5/8 FF $ 900.00PB-1200 660-4719 12 X 6-5/8 FF $ 1,200.00
Cross ReferenceHyspan Series 5500Microflex Style MBSSenior Flexonics Series TCSUnisource BPC
STYLE# PB
STOCKING LOCATIONS
Global -Flex Mfg.1244 Redwood Blvd.Redding, CA 96003
Toll Free: (877) 297-4673Fax: (530) 229-1329
GGGlllooobbbaaalll --- FFFllleeexxx MMMfffggg... PRICE LIST3-25-2002
21
Multi-Ply Bellows Pump ConnectorsFlange and Tie Rods
PartNumber
ComputerNumber
SizeInches
PriceList
PB-R-200 660-4721 2 X 6 FF $ 216.00PB-R-250 660-4722 2-1/2 X 6 FF $ 261.00PB-R-300 660-4723 3 X 6 FF $ 312.00PB-R-400 660-4724 4 X 6 FF $ 426.00PB-R-500 660-4725 5 X 6 FF $ 531.00PB-R-600 660-4726 6 X 6 FF $ 585.00PB-R-800 660-4727 8 X 6 FF $ 870.00PB-R-1000 660-4728 10 X 8 FF $ 1,152.00PB-R-1200 660-4729 12 X 8 FF $ 1,461.00
CROSS REFERENCEHyspan 5500Micro -Flex MBS-RSenior Flexonics TCS-RUnisource BPCR
STYLE# PB-R
STOCKING LOCATIONS
Global -Flex Mfg.1244 Redwood Blvd.Redding, CA 96003
Toll Free: (877) 297-4673Fax: (530) 229-1329
GGGlllooobbbaaalll --- FFFllleeexxx MMMfffggg... PRICE LIST3-25-2002
22
STYLE# CMCompensators
Male Pipe Thread
PartNumber
ComputerNumber
SizeInches
PriceList
CM-075 660-5001 3/4 X 12-1/8 $ 162.00CM-100 660-5002 1 X 12-1/8 $ 183.00CM-125 660-5003 1-1/4 X 14-1/8 $ 210.00CM-150 660-5004 1-1/2 X 14-1/8 $ 252.00CM-200 660-5005 2 X 14-1/8 $ 303.00CM-250 660-5006 2-1/2 X 15-1/2 $ 402.00CM-300 660-5007 3 X 15-3/16 $ 471.00CM-400 660-5008 4 X 15-3/16 $ 606.00
Cross ReferenceHyspan 8500Metraflex HPSenior-Flexonics H & HBUnisource EC-MMT
STOCKING LOCATIONS
Global -Flex Mfg.1244 Redwood Blvd.Redding, CA 96003
Toll Free: (877) 297-4673Fax: (530) 229-1329
GGGlllooobbbaaalll --- FFFllleeexxx MMMfffggg... PRICE LIST3-25-2002
23
CompensatorsSweat Ends Bronze
STYLE# CS
PartNumber
ComputerNumber
SizeInches
PriceList
CS-075 660-5101 3/4 X 12-1/2 $ 210.00CS-100 660-5102 1 X 12-1/2 $ 216.00CS-125 660-5103 1-1/4 X 13-13/16 $ 261.00CS-150 660-5104 1-1/2 X 13-13/16 $ 276.00CS-200 660-5105 2 X 13-13/16 $ 363.00CS-250 660-5106 2-1/2 X 14-7/16 $ 510.00CS-300 660-5107 3 X 14-7/16 $ 642.00
Cross ReferenceHyspan Series 8500Metraflex Model HPSenior-Flexonics H & HBUnisource EC-FFS
STOCKING LOCATIONS
Global -Flex Mfg.1244 Redwood Blvd.Redding, CA 96003
Toll Free: (877) 297-4673Fax: (530) 229-1329
GGGlllooobbbaaalll --- FFFllleeexxx MMMfffggg... PRICE LIST3-25-2002
24
Seismic ConnectorBronze Sweat
SizeInches Part Number
List Price2”
Movement
List Price3”
Movement
List Price4”
Movement
AdderDrainPlug
1/2 SC-B -050-SWT-LL $ 90.72 $ 93.15 $ 95.17 $ 29.973/4 SC-B -075-SWT-LL $ 94.77 $ 97.26 $ 99.00 $ 29.971 SC-B -100-SWT-LL $ 128.89 $ 132.35 $ 136.00 $ 29.97
1-1/4 SC-B -125-SWT-LL $ 169.00 $ 175.00 $ 181.35 $ 29.971-1/2 SC-B -150-SWT-LL $ 204.00 $ 211.50 $ 218.99 $ 41.69
2 SC-B -200-SWT-LL $ 291.76 $ 298.89 $ 304.56 $ 41.692-1/2 SC-B -250-SWT-LL $ 520.00 $ 528.00 $ 538.00 $ 51.50
3 SC-B -300-SWT-LL $ 568.00 $ 617.60 $ 584.00 $ 51.504 SC-B -400-SWT-LL $ 752.00 $ 766.40 $ 778.00 $ 51.50
Construction: Bronze hose and braid, Bronze sweat ends. Live length varies onmovements required
Cross ReferenceUnisource V-BF-11-12-12Metraflex Metraloop
STYLE# SC-B-SWT
STOCKING LOCATIONS
Global -Flex Mfg.1244 Redwood Blvd.Redding, CA 96003
Toll Free: (877) 297-4673Fax: (530) 229-1329
GGGlllooobbbaaalll --- FFFllleeexxx MMMfffggg... PRICE LIST3-25-2002
25
STYLE# SC-FLG Seismic ConnectorCarbon Steel Flange
SizeInches Part Number
List Price2”
Movement
List Price3”
Movement
List Price4”
Movement
AdderDrainPlug
2 SC-200 -FLG-LL $ 205.80 $ 218.25 $ 228.76 $ 38.612-1/2 SC-250 -FLG-LL $ 240.75 $ 258.00 $ 273.00 $ 38.61
3 SC-300 -FLG-LL $ 283.38 $ 301.25 $ 320.00 $ 38.614 SC-400 -FLG-LL $ 396.75 $ 427.95 $ 453.45 $ 38.615 SC-500 -FLG-LL $ 556.38 $ 596.56 $ 636.00 $ 38.616 SC-600 -FLG-LL $ 707.69 $ 766.83 $ 822.28 $ 38.618 SC-800 -FLG-LL $ 1,351.37 $ 1,486.85 $ 1,606.88 $ 72.42
10 SC-1000-FLG-LL $ 2,374.00 $ 2,618.23 $ 2,854.08 $ 72.4212 SC-1200-FLG-LL $ 3,306.75 $ 3,665.15 $ 3,971.00 $ 72.42
Construction: Series 300 stainless steel hose and braid with carbon steelflanges. Live length varies on movements required
Cross ReferenceUnisource V-SF21-47-47Metraflex Metraloop
STOCKING LOCATIONS
Global -Flex Mfg.1244 Redwood Blvd.Redding, CA 96003
Toll Free: (877) 297-4673Fax: (530) 229-1329
GGGlllooobbbaaalll --- FFFllleeexxx MMMfffggg... PRICE LIST3-25-2002
26
STYLE# SC-GVD Seismic ConnectorCarbon Steel Grooved
Cross ReferenceUnisource V-SF21-55-55Metraflex Metraloop
SizeInches Part Number
List Price2”
Movement
List Price3”
Movement
List Price4”
Movement
AdderDrainPlug
2 SC-200-GVD-LL $ 215.46 $ 230.45 $ 240.00 $38.612-1/2 SC-250-GVD-LL $ 253.63 $ 270.75 $ 286.00 $38.61
3 SC-300-GVD-LL $ 297.13 $ 317.00 $ 336.00 $38.614 SC-400-GVD-LL $ 417.00 $ 450.00 $ 513.00 $38.615 SC-500-GVD-LL $ 583.00 $ 625.91 $ 667.00 $38.616 SC-600-GVD-LL $ 742.00 $ 804.00 $ 864.00 $38.618 SC-800-GVD-LL $1,419.50 $ 1,561.00 $1,727.00 $72.4210 SC-1000-GVD-LL $2,492.70 $ 2,749.00 $2,997.00 $72.4212 SC-1200-GVD-LL $3,473.99 $ 3,848.00 $4,170.00 $72.42
Construction-- Series 300 stainless steel hose and braid- Carbon steel groovedends. Live length varies on movements required
STOCKING LOCATIONS
Global -Flex Mfg.1244 Redwood Blvd.Redding, CA 96003
Toll Free: (877) 297-4673Fax: (530) 229-1329
GGGlllooobbbaaalll --- FFFllleeexxx MMMfffggg... PRICE LIST3-25-2002
27
STYLE# SC-MPT Seismic ConnectorCarbon Steel Male Pipe
Cross ReferenceUnisource V-SF21-40-40Metraflex Metraloop
SizeInches Part Number
List Price2”
Movement
List Price3”
Movement
List Price4”
Movement
AdderDrainPlug
1/2 SC-050 -MPT-LL $ 119.36 $ 121.26 $ 124.41 $ 27.753/4 SC-075 -MPT-LL $ 128.52 $ 130.41 $ 133.74 $ 27.751 SC-100 -MPT-LL $ 146.05 $ 148.74 $ 191.68 $ 27.75
1-1/4 SC-125 -MPT-LL $ 166.10 $ 170.21 $ 215.68 $ 27.751-1/2 SC-150 -MPT-LL $ 218.25 $ 221.84 $ 232.10 $ 38.61
2 SC-200 -MPT-LL $ 231.47 $ 236.25 $ 248.52 $ 38.61
Construction: Series 300 stainless steel hose and braid with carbon steel malepipe thread. Live length varies on movements required
Note: for weld end fitting designate WDE same list price
STOCKING LOCATIONS
Global -Flex Mfg.1244 Redwood Blvd.Redding, CA 96003
Toll Free: (877) 297-4673Fax: (530) 229-1329
GGGlllooobbbaaalll --- FFFllleeexxx MMMfffggg... PRICE LIST3-25-2002
28
Notes
29www.globalflexmfg.com (530) 229-1320 Toll Free: (877) 297-4673 Fax: (530) 229-1329 email: info@globalflexmfg.com
GGGlllooobbbaaalll --- FFFllleeexxx MMMfffggg...1244 Redwood Blvd. Redding, CA 96003
METAL HOSE PRODUCT LINE
SN SERIESThe standard of the industry when a Type 321 or 316 stainless steel hose is required. SN isconstructed with a close-pitch “omega” design annular corrugation to provide a high degreeof flexibility and long life. Available in lengths as long as fifty feet, depending ondiameter.
UN SERIESUN is the most flexible metal hose available anywhere. The unique hydro-formed annularhose construction provides unequaled cycle life. UN is the only ISO 10380 approved hosein the world – far surpassing international standards for cycle life and reliability. Availablein Type 321 or 316 stainless steel.
UNHP SERIESWhen a higher-pressure metal hose is required, UNHP will provide ultra high-pressureresistance and much better flexibility than other high-pressure hoses. UNHP is constructedwith a Type 316 stainless steel, hydro-formed convoluted hose and two series 300 stainlesssteel braids.
BN SERIESDesigned specifically as flexible connections in bronze or copper lines. BN is built withbronze, butt-welded, close pitch corrugated hose, covered with bronze braid. Flexible in allsizes providing high working pressures.
GF SERIESThe Global-Flex line of interlocked hose is available in most stainless steel alloys,aluminum, bronze, brass, aluminized, galvanized, and tin plate. Various packings areavailable to withstand high pressures and temperature extremes. A complete assortment offittings, flanges, and couplers are also available.
30www.globalflexmfg.com (530) 229-1320 Toll Free: (877) 297-4673 Fax: (530) 229-1329 email: info@globalflexmfg.com
GGGlllooobbbaaalll --- FFFllleeexxx MMMfffggg...1244 Redwood Blvd. Redding, CA 96003
STATIC DYNAMIC
NOMINALDIAMETER
(INCHES)
ACTUALID
(MM)
NUMBEROF
BRAIDS
NOMINALOD
(INCHES)
MINIMUMBEND
RADIUS(INCHES)
MAXIMUMWORKINGPRESSURE
@ 70 F(PSIG)
MINIMUMBEND
RADIUS(INCHES)
MAXIMUMWORKINGPRESSURE
@ 70 F. (PSIG)
BURSTPRESSURE@ 70 F.
(PSIG)
WEIGHTPER FOOT(POUNDS)
1/4 6 012
.41
.47
.53
1 9018002700
4-1/2 9018002700
72339100
0.040.110.18
3/8 10 012
.65
.71
.77
1-1/8 7015582336
5 7015582336
62309345
0.100.200.30
1/2 12 012
.77
.83
.89
1-1/2 7011861779
5-1/2 7011861779
47437115
0.110.220.33
3/4 20 012
1.161.221.28
2-1/8 438981347
7 438981347
35915387
0.190.370.55
1 25 012
1.471.531.59
2-3/4 437181077
8 437181077
28724308
0.260.500.74
1 -1/4 32 012
1.751.831.91
3-1/8 43645968
10 43645968
25813872
0.290.610.93
1 -1/2 40 012
2.082.162.24
3-7/8 28531797
11 28531797
21253188
0.470.851.23
2 50 012
2.612.692.77
5-1/8 14449674
13 14449674
17972696
0.591.111.63
2 -1/2 65 012
3.403.503.60
6-7/8 14415626
16 14415626
16692504
0.841.642.44
3 80 012
3.883.984.08
7-7/8 14346519
18 14346519
13842076
1.182.062.94
4 100 012
4.965.065.16
9-7/8 14299448
22 14299448
11941791
1.412.473.53
5 125 012
6.006.136.25
12-7/8 14275412
28 14275412
10991649
2.183.615.04
6 150 012
7.017.147.26
15 11210315
32 11210315
8391259
2.694.446.19
8 203 012
9.009.259.50
19 2.5235280
42 2.5235280
9401,120
5.148.54
11.9510 254 0
12
11.0011.2511.50
24 4260280
56 4260280
1,0401,120
8.2014.0119.81
12 305 012
13.1213.3813.54
28 2.5160220
58 2.5160220
640880
9.8016.3022.81
MATERIAL:Hose: 321 or 316 stainless steelBraid: 300 series stainless steelPressure applications:Full vacuum to working pressureslisted below.
CONSTRUCTION:Annular butt-welded, mechanicallyformed close pitch corrugated hose.SN20 – UNBRAIDED HOSESN21 – SINGLE BRAIDED HOSESN22 – DOUBLE BRAIDED HOSE
Style SN Data Sheet
31www.globalflexmfg.com (530) 229-1320 Toll Free: (877) 297-4673 Fax: (530) 229-1329 email: info@globalflexmfg.com
GGGlllooobbbaaalll --- FFFllleeexxx MMMfffggg...1244 Redwood Blvd. Redding, CA 96003
MATERIAL
Hose: 321 or 316 stainless steelBraid: 300 series stainless steel
CONSTRUCTION
Annular butt-welded, hydro-formed close pitch corrugated hose
CHARACTERISTICS
Extremely flexible– ISO 10380 conformance, 50,000 cycle rated and pressure rated as per ISO 10380.Available in long lengths on reels.
UN20 – UNBRAIDED HOSEUN21 – SINGLE BRAIDED HOSEUN22 – DOUBLE BRAIDED HOSE (Contact Global-Flex for specifications)
STATIC DYNAMIC
NominalDiameter(Inches)
ActualID
(MM)
Numberof
Braids
NominalOD
(Inches)
MinimumBend
Radius(Inches)
MaximumWorkingPressure@ 70 F(PSIG)
MinimumBen
Radius(Inches)
MaximumWorking
Pressure @70 F
(PSIG)
BurstPressure@ 70 F(PSIG)
WeightPer Foot(Pounds)
1/4” 6 01
.39
.45.35.75
3924,829 5.50 2,030 11.165
.04
.123/8 10 0
1.63.70
.551.14
1743,727 6.00 1.450 8,004
.23
.101/2 12 0
1.73.79
.831.34
1312,973 4.88 1,160 6,104
.10
.243/4 20 0
11.111.18
1.262.09
321,421 6.65 725 3,509
.15
.361 25 0
11.371.43
1.462.52
26972 7.68 580 2,755
.20
.441-1/4 32 0
11.711.79
1.813.11
221,131 8.86 580 2,973
.33
.681-1/2 40 0
12.062.14
2.163.86
17885 10.04 465 2,465
.40
.882 50 0
12.552.65
2.564.72
13928 11.54 465 2,436
.641.35
2-1/2 65 01
3.193.28
3.155.90
10623 13.58 363 1,871
.791.74
3 80 01
3.813.93
3.827.09
9522 15.35 290 1,595
.942.30
4 100 01
4.634.74
4.458.58
7406 17.72 218 1,247
1.122.71
5 125 01
5.986.10
5.2010.04
6276 25.60 232 928
3.044.50
6 150 01
6.856.97
5.9811.42
4232 32.08 210 841
3.485.35
Style UN Data Sheet
32www.globalflexmfg.com (530) 229-1320 Toll Free: (877) 297-4673 Fax: (530) 229-1329 email: info@globalflexmfg.com
GGGlllooobbbaaalll --- FFFllleeexxx MMMfffggg...1244 Redwood Blvd. Redding, CA 96003
UNHP Data Sheet
MATERIAL:Hose: 316L Stainless SteelBraid: 300 Series Stainless Steel
CONSTRUCTION: Butt-welded, hydro-formed, heavy wall compressed hose with double braid
CHARACTERISTICS: Ultra high-pressure hose for the most demanding pressure and flexingconditions.
UNHP: Double braided hose
NominalDiameter
(Inch)
ActualID
(MN)
NumberOf
Braids
NominalOD
(Inch)
MinimumStatic
Bend Radius(Inches)
MinimumDynamic
Bend Radius(Inches)
MaximumWorking
Pressure @ 70 F(PSIG)
BurstPressure@ 70 F(PSIG)
WeightPer Foot(Pounds)
1/4 6 2 .51 2.80 5.20 3,988 15,950 .2138 10 2 .76 3.00 5.50 3,117 12,470 .391/2 12 2 .86 4.00 7.10 3,165 12,658 .493/4 20 2 1/21 5.20 7.50 2,066 8,265 .741 25 2 1.57 6.70 9.00 2,004 8,018 1.23
1-1/4 32 2 1.93 7.50 10.00 1,653 6,612 1.681-1/2 40 2 2.26 8.50 12.80 1,334 5,336 2.08
2 50 2 2.75 10.80 16.00 1,294 5,176 2.82
Contact Global-Flex Mfg. for maximum test pressures
33www.globalflexmfg.com (530) 229-1320 Toll Free: (877) 297-4673 Fax: (530) 229-1329 email: info@globalflexmfg.com
GGGlllooobbbaaalll --- FFFllleeexxx MMMfffggg...1244 Redwood Blvd. Redding, CA 96003
FITTINGSVarious fittings can be attached to metal hose. The fittings can be made of any material compatible withthe hose and the media. Some of the most common ones are illustrated below.
Male Pipe Thread
Plain Nipples
Male Swivel
Male Union
Full Coupling
Half Coupling
Plain Weld Nipples
Square Cut
Beveled For Welding
Plain Tubing
AN 818 Or J.I.C.
Female SwivelAnd
Other Tube Fittings
Other Fittings WhichThread or Weld On:
Cam LockElbowsFlanged UnionHydraulic
Quick DisconnectSocket WeldTees
Stub Ends WithFloating Flanges
Forged Flange
Plate Flange
Flanges
Plate
Slip -On
Weld Neck
34www.globalflexmfg.com (530) 229-1320 Toll Free: (877) 297-4673 Fax: (530) 229-1329 email: info@globalflexmfg.com
GGGlllooobbbaaalll --- FFFllleeexxx MMMfffggg...1244 Redwood Blvd. Redding, CA 96003
SPECIAL HOSE ASSEMBLIESFABRICATION
JACKETEDASSEMBLY
Jacketed Assemblies are normally used in one of the following applications:1. As a heated transfer line for those products such as sulphu r, which must be maintained at an elevated temperature in
order to flow readily. Steam or hot oil is circulated through the jacket, which in turn heats the products being conveyedin the core hose.
2. As a cryogenic transfer line. Maintaining a high vacuum in the jacket effectively insulates cryogenic liquids beingconveyed in the core hose.
TRACEDASSEMBLY
Traced Assemblies are used when the product being conveyed must be heated in order to flow freely. Steam or hot oilcirculated through the inner tracer hose heats the product in order to maintain high flow rates.
LINEDASSEMBLY
Product being conveyed through an unlined corrugated metal hose at high velocity can set up resonant vibration withinthe hose causing it to prematurely fail. This may be eliminated by adding a liner to the hose.
GUARDEDASSEMBLY
Guarded Assemblies are used where rough handling, abrasion, or flexing past its minimum bend radius could easilydamage a corrugated metal hose.
35www.globalflexmfg.com (530) 229-1320 Toll Free: (877) 297-4673 Fax: (530) 229-1329 email: info@globalflexmfg.com
GGGlllooobbbaaalll --- FFFllleeexxx MMMfffggg...1244 Redwood Blvd. Redding, CA 96003
Consider these selection factors for a particular application
SELECTING METAL HOSE
1. Size of Connecting PipeThe size of metal hose for a givenapplication is usually determined bythe size of the existing piping andmating fittings. However, otherconsiderations such as pressure drop,rate of flow, and velocity alsoinfluence your selection of theproper size of hose.
2. Temperature of Operation inRelation to Pressure andMaterialTemperature affects the physicalproperties of any material. Thisfactor must be taken into account, aswell as the working pressure and thespecific applications. Hose type,metal alloy, fittings, and attachmentsdetermine the temperature limit.
3. Media in Relation toCorrosion of Hose MaterialA primary consideration inspecifying metal hose is to select amaterial, which is resistant to themedia to be conveyed through thehose; this is possible in mostapplications. Remember to considerthe corrosive effects of the outsideenvironment, as well as the mediaconveyed within. Both factors aresignificant. Remember also thatmetal hose, a thin walled material,will not have the same life as pipe ortube that is a heavier-walledmaterial, even though they are bothof the same material.
4. Pressures – Operating, Testand Burst Needed for theApplicationThe pressure rating for each type offlexible metal hose is affected by theconditions of actual use, such as, shock orpulsating conditions, temperature, andbending stresses. The maximumoperating pressure is 25% of the NominalBurst Pressure, while the maximum testpressure is 50% of the MaximumOperating Pressure. The Nominal BurstPressure is the pressure at which the hosecan be expected to rupture. Whenpulsating, surge or shock pressures exist,from conditions such as fast closingvalves, the peak pressure should notexceed 50% of the Maximum OperatingPressure. Refer to our catalog thatspecifies the pressure ratings for each ofthese conditions, as it relates to bothbraided and unbraided hose. In addition,you should refer to the temperature chartfor the pressure ratings as affected bytemperatures in excess of 70 Fahrenheit.
5. Motion Type Affecting Hoseand Amount of MotionFlexible metal hose is specified forseveral different applications; wheneverthere is excessive vibration; whenevermisaligned pipe or tube is encountered orwhenever flexibility is needed for manualhandling situations. To select the properhose for any of these applications requirescareful consideration of the inherentflexibility of the material in regards to thedesign of the assembly, installation andversatility expected of the hose.
6. Length of Hose Needed toAbsorb Motion in Relation toSpace Available.The type of motion, the offsetmotion, vibration, as well as livelength required, are all factors toconsider in determining the properhose selection. Refer to our catalogfor exact specifications of theseconditions.
7. Fittings Needed to Connectto Existing ConnectionsCompatible with Media,Temperature, and PressureEnd linings may have male or femalethreads. In addition to conventionalunions – flanges, flared tube fittings– special designs or customconnectors are available. Theappropriate type of hose, alloy andtemperature determines theattachment method welding,soldering, silver brazing, ormechanical. Contact Global-FlexMfg. for custom fitting information.
8. Flow VelocityHigh flow velocities in metal hosecan cause vibration resulting in noiseand premature failure.
36www.globalflexmfg.com (530) 229-1320 Toll Free: (877) 297-4673 Fax: (530) 229-1329 email: info@globalflexmfg.com
GGGlllooobbbaaalll --- FFFllleeexxx MMMfffggg...1244 Redwood Blvd. Redding, CA 96003
INSTALLATION INFORMATIONAvoid Torque
Do not twist the hose assembly during installation whenaligning the bolt holes in a flange or in mating up pipethreads. The utilization of lap joint flanges or pipeunions will minimize this condition. It is recommendedthat two wrenches be used in making the unionconnection: one to prevent the hose from twisting andthe other to tighten the coupling.
Prevent Out-of Plane-Flexing in an installation
Always install the hose so that the flexing takes place inonly one plane – this being the plane in which thebending occurs.
Avoid Over Bending
The repetitive bending of a hose to a radius smaller thanthe radius listed in the specification tables for corrugatedhose will result in early hose failure. Always providesufficient length to prevent over bending and toeliminate strain on the hose.
Avoid Careless Handling of the Hose Assembly
Always lift or carry metal hose to prevent abrasiondamage particularly to braided corrugated hose. Storemetal hose assemblies away from areas where it can besubjected to spillage, corrosive fumes or sprays, weldsplatter, etc.
Always Support the Piping
A piping system, which utilizes metal hose to absorbmovement, must be properly anchored and/or guided.Always support the piping to prevent excessive weightfrom compressing the hose and relaxing the braidtension.
CORRECT
INCORRECT
37www.globalflexmfg.com (530) 229-1320 Toll Free: (877) 297-4673 Fax: (530) 229-1329 email: info@globalflexmfg.com
GGGlllooobbbaaalll --- FFFllleeexxx MMMfffggg...1244 Redwood Blvd. Redding, CA 96003
CORRECT
INCORRECT
CORRECT
INCORRECT
CORRECT
INCORRECT
CORRECT
INCORRECT
38www.globalflexmfg.com (530) 229-1320 Toll Free: (877) 297-4673 Fax: (530) 229-1329 email: info@globalflexmfg.com
GGGlllooobbbaaalll --- FFFllleeexxx MMMfffggg...1244 Redwood Blvd. Redding, CA 96003
WORKING PRESSUREDERATING FACTOR
FOR ELEVATED TEMPERATURES
TEMPERATUREIN
DEGREES F.
WORKING PRESSURE DERATING FACTOR
T321/T316L T304 Carbon Steel Bronze70150200250300
1.00.97. 94.92. 88
1.00.96. 92.91. 86
1.00.99. 97.96. 93
1.00.92. 89.86. 83
350400450500600
.86
.83. 81.78. 74
.85
.82. 80.77. 73
.91
.87
. 86
.81
. 74
.81
.78
. 75
70080090010001100
.70
.66. 62.60. 58
.69
.64. 58
.66
.52
. 50
1200130014001500
.55
.50. 44.40
To calculate a working pressure derated for elevated temperature: Multiply the hoseworking pressure shown in the catalog by the appropriate derating factor from above.
Note: The working pressure of an assembly at elevated temperatures may be affected byfittings type, material, and method of attachment.
39www.globalflexmfg.com (530) 229-1320 Toll Free: (877) 297-4673 Fax: (530) 229-1329 email: info@globalflexmfg.com
GGGlllooobbbaaalll --- FFFllleeexxx MMMfffggg...1244 Redwood Blvd. Redding, CA 96003
OFFSET CHART
To determine the required livelength of an application:
Find the specific bend radiusfrom the general data sheet.Now, locate that bend radius onthe chart below. From the offset(Y) across the top of the chart,locate the offset in inches. Readdown to the bend radius and thenumber will be the live lengthrequired. Remember to alwaysgo to the next highest number inall calculations.
Example: UN series 1” diameterwith an 1” offset is required.Find the bend radius from theGeneral Data Sheet for 1” hose –it is 7.68. Under bend radius onthis chart go to 8. Follow acrossto the required offset, which is 1”.The live length in this case wouldbe 7”. Note: If the offset (Y)occurs on both sides of thecenterline, the live length is basedon the total travel or 2 times Y.
Offset Y (Inches)BENDRADIUS
.25 .50 .76 1.00 1.25 1.50 2.00 2.50 3.00 4.00 5.00 6.00 8.00 10.00 12.00
.50 0.9 1.3 1.7 2.0 2.3 2.6 3.2 3.7 4.2 5.3 6.3 7.3 9.4 11.4 13.4
1 1.3 1.8 2.3 2.6 3.0 3.4 4.0 4.6 5.2 6.3 7.4 8.5 10.6 12.6 14.7
2 1.8 2.5 3.1 3.6 4.1 4.5 5.3 6.0 6.7 8.0 9.2 10.5 12.6 14.8 17.0
3 2.1 3.0 3.8 4.4 4.9 5.4 6.3 7.2 7.9 9.4 10.7 12.0 14.4 16.7 19.04 2.5 3.5 4.3 5.0 5.6 6.2 7.2 8.1 9.0 10.6 12.0 13.4 16.0 18.4 20.85 2.8 3.9 4.8 5.6 6.3 6.9 8.0 9.0 9.9 11.7 13.21 14.7 17.4 20.0 22.46 3.0 4.3 5.3 6.1 6.8 7.5 8.7 9.8 10.8 12.6 14.3 15.9 18.8 21.4 24.07 3.3 4.6 5.7 6.6 7.4 8.1 9.4 10.5 11.6 13.6 15.3 17.0 20.0 22.8 25.58 3.5 4.9 6.0 7.0 7.8 8.6 10.0 11.2 12.4 14.4 16.3 18.0 21.2 24.1 26.69 3.7 5.2 6.4 7.4 8.3 9.1 10.6 11.9 13.1 15.2 17.2 19.0 22.3 25.3 28.1
10 3.9 5.5 6.8 7.8 8.8 9.6 11.1 12.5 13.7 16.0 18.0 19.9 23.3 26.5 29.412 4.3 6.0 7.4 8.5 9.6 10.5 12.2 13.6 15.0 17.4 19.6 21.6 25.3 28.6 31.714 4.6 6.5 8.0 9.2 10.3 11.3 13.1 14.7 16.2 18.8 21.1 23.2 27.1 30.7 33.916 4.9 6.7 8.5 9.8 11.0 12.1 14.0 15.7 17.2 20.0 22.5 24.7 28.8 32.6 36.018 5.2 7.4 9.0 10.4 11.7 12.8 14.8 16.6 18.3 21.2 23.8 26.2 30.5 34.4 37.9
40www.globalflexmfg.com (530) 229-1320 Toll Free: (877) 297-4673 Fax: (530) 229-1329 email: info@globalflexmfg.com
GGGlllooobbbaaalll --- FFFllleeexxx MMMfffggg...1244 Redwood Blvd. Redding, CA 96003
GFSS/GFG INFORMATION SHEET
HOSE: Stainless steel, aluminum, bronze, brass, aluminized, galvanized,and tinplate. Strip thickness range from 10 to 30-gauge material
PACKING: Fabric, rubber, copper, high temperature fiber, and stainlesssteel to withstand high pressures and temperature extremes.
CONSTRUCTION: Available in a wide variety of styles dependingon the conditions and application. Styles suited for bulk materialhandling, hot product transfer, exhaust, hose lining, or exterior guardcan be assembled with the appropriate fittings and other welded fabrication.
Lined: Typically used to transfer abrasive materials. A directional flow liner is typically provided in stainless steelor galvanized construction.
Unlined or Rough-Bore: Used for many applications including exhaust, hose linings, and protective covers andbend restrictors for hose and cable.
A special interlocking mechanical construction provides excellent flexibility, even under operating conditions.Mechanical forming styles include standard interlock, floppy, and square lock.
COMMON APPLICATION AND INDUSTRIES FOR GFSS/GFG
TANK TRUCK INDUSTRYOften used for hot asphalt transfer, grain unloading, flour handling, pebble lime, and other bulk products.
STEEL INDUSTRYLined is perfect for lime injection, cooling plate armor, and tap hose drill armor.
OIL EXPLORATIONUsed as an exterior guard on Blow-Off-Preventor hydraulic lines.
41www.globalflexmfg.com (530) 229-1320 Toll Free: (877) 297-4673 Fax: (530) 229-1329 email: info@globalflexmfg.com
GGGlllooobbbaaalll --- FFFllleeexxx MMMfffggg...1244 Redwood Blvd. Redding, CA 96003
AIR FLEX PIPE
Air Flex Pipe, flexible stainless steel hose, isdesigned to carry the air supply to your worklocation. Air Flex Pipe, flexible stainlesssteel pipe can be used in place of black pipeand pipe fittings or special plastics used forcompressed air.
Air Flex Pipe saves up to 75 percent of theinstallation time and labor cost.
Material Construction: corrugated 304stainless steel– fittings brass MPT FMPT-Union-Maximum Pressure 200PSI
Part Number Diameter Length List PriceGFAP1210 1/2” ID 10 FT $ 40.50GFAP1215 1/2” ID 15 FT $ 59.25GFAP1225 1/2” ID 25 FT $ 93.75
GFAP3410 3/4” ID 10 FT $ 52.50GFAP3415 3/4” ID 15 FT $ 76.80GFAP3425 3/4” ID 25 FT $ 123.00
GFAP0110 1” ID 10 FT $ 68.40GFAP0115 1” ID 15 FT $ 101.55GFAP0125 1”ID 25 FT $ 153.50
FITTINGS LIST PRICE1/2” 3/4” 1”
Male NPT GFAM1212 $ 12.30 GFAM3406 $ 17.70 GFAM0106 $ 24.90Female NPT GFAF1212 $ 14.85 GFAF3406 $ 19.05 GFAF0106 $ 25.20Union GFAU1212 $ 12.90 GFAU3406 $ 19.20 GFAU0106 $ 20.75
42www.globalflexmfg.com (530) 229-1320 Toll Free: (877) 297-4673 Fax: (530) 229-1329 email: info@globalflexmfg.com
GGGlllooobbbaaalll --- FFFllleeexxx MMMfffggg...1244 Redwood Blvd. Redding, CA 96003
NOTESSTAINLESS STEEL METAL HOSE
43www.globalflexmfg.com (530) 229-1320 Toll Free: (877) 297-4673 Fax: (530) 229-1329 email: info@globalflexmfg.com
GGGlllooobbbaaalll --- FFFllleeexxx MMMfffggg...1244 Redwood Blvd. Redding, CA 96003
METAL EXPANSION JOINT PRODUCTSMEJMetal bellow expansion joints are available in basic low-corr, mid-corr, and high-corr construction, and in50#, 150# and 300# pressure ratings. Single-ply bellows are standard, but multiple ply bellows areavailable. Either single or dual bellows can be selected, depending on the movement ratings needed. Endconfigurations include weld type, fixed flange, or vanstone. Accessories such as tie rods, shroud coversand internal liners can be added to fit the application. Material options include 304, 321, and 316 SS, aswell as Inconel, Monel, and other special alloys. Sizes available up to 144” diameter, depending onbellows type.
EJEPGlobal-Flex Mfg. EJEP Externally Pressurized Expansion Joints are a packless, maintenance free productdesigned for use in straight runs of pipe to accommodate large amounts of thermal expansion. Within aprotective enclosure, external pressure is applied to the bellows via a gap between the internal flange andhousing. This pressure keeps the bellows stable. EP Series expansion joints are available in 150# and300# designs, and with either flanged or weld ends. Both single and dual bellows are available. Drainports can be added for steam service. Sizes range from 2” to 24” diameter.
MEJ-CFControlled-Flexing expansion joints combine corrugated metal bellows with mated neck rings and bellowsequalizing rings. Corrugation movements are equalized, even at high pressures and large axial movements.Both 150# and 300# pressure styles are available. Internal liners can be added and external shroud coverscan be installed for safety. Ends include fixed or vanstone flanges and weld end style. Series MEJ-CFControlled-Flexing Expansion Joints are manufactured in sizes from3” to 24” depending on bellowspressure series.
CM/CMSDesigned to control axial movements in small diameter piping systems. Series CM/CMS ExpansionCompensators utilize the external pressurization principal to eliminate bellows squirm. Styles are availablefor connection to steel piping or copper tubing. Standard end configurations are threaded, copper sweat, orflanged. Sizes range from 3/4” to 4” diameter.
PB/PBRSeries PB/PBR Bellow Pump Connectors utilize a compact face-to-face, multi-ply construction to absorbnoise and vibration generated by mechanical equipment. The longer style PBR is manufactured in a thesame lengths as standard rubber pump connectors and can offer substantial temperature and pressureadvantages over rubber connectors. PB/PBR connectors are built with stainless steel bellows and carbonsteel 150# flanges and limit rods.
44www.globalflexmfg.com (530) 229-1320 Toll Free: (877) 297-4673 Fax: (530) 229-1329 email: info@globalflexmfg.com
GGGlllooobbbaaalll --- FFFllleeexxx MMMfffggg...1244 Redwood Blvd. Redding, CA 96003
METAL EXPANSION JOINT PRODUCTSSERIES PG – PIPE ALIGNMENT GUIDESTo insure the proper operation of piping expansion joints, Global-Flex Mfg. Series PG Pipe Alignment Guidesshould always be installed in the system. Series PG guides help to control the motion of pipe and expansionjoints, insuring that the joint is subject only to the deflection for which it was designed. Guides permitunobstructed axial movement of the pipe while restricting lateral, angular, or buckling movements. Standardspider guides are manufactured to accommodate specific amounts of movement and insulation. Additionalitems in this series include pre-insulated guides, pipe slides and bases, anchor clamps, baseboard fin -tubeguides, baseboard anchors, and hinged series.
SPECIAL DESIGN EXPANSION JOINTSUNIVERSALUniversal expansion joints are built with dual bellows and are tied the entire length of the expansion joint.This type of joint is the ideal product to control large amounts of lateral motion used in 90-degree elbowdirection changes. Universal expansion joints can be used in pipe runs where extensive anchoring andguiding cannot be provided.
HINGED & GIMBALEDHinged bellow expansion joints are designed to take up angular rotation in a single plane. Slotted hingedjoints will accommodate axial and angular motion in one plane. Gimbaled bellows will take up angularmotion in all planes. Hinged and gimbaled joints are typically used in combination to absorb many differentmovements.
PRESSURE BALANCEDPressure balanced expansion joints incorporate elbows with single or universal bellows. The elbow ispermitted to float free of bellows thrust forces. Main anchors are not required.
SLIP-PAKWhen large amounts of axial movements must be absorbed at high pressures and temperatures, packedexpansion joints are a wise choice. Slip-Pak joints are internally and externally guided and are available insingle or dual configurations. Long service life can be insured by re-packing while in service. Meets MIL-E-17814E specifications.
RECTANGULARRectangular bellows can be fabricated to take up movements in duct systems. A variety of alloys can beused to assure long life operation in high temperature conditions.
45www.globalflexmfg.com (530) 229-1320 Toll Free: (877) 297-4673 Fax: (530) 229-1329 email: info@globalflexmfg.com
GGGlllooobbbaaalll --- FFFllleeexxx MMMfffggg...1244 Redwood Blvd. Redding, CA 96003
SERIES MEJBELLOWS STYLE EXPANSION JOINT
Series MEJ Bellows Expansion Joints are constructed using multi-corrugation metal bellows, and flanged orweld type end connections. Accessories such as tie rods, limit rods, flow liners, and covers can be added,depending on the application. Free-flexing expansion joints are used to control axial pipe movements thattypically arise due to thermal expansion. Limited lateral offset, angular rotation and vibration isolation can alsobe accommodated. Mid-corrugation bellows are an economical choice when average movements areexperienced. High-Corr bellows should be used to absorb greater movements. Where expected motions aregreater than what a single bellows can accommodate, dual bellows with a center anchor base can be used.Bellows pressure carriers include low-pressure exhaust bellows, 50 psi, 150 psi, and 300 psi. Single-plybellows are standard. Multi-ply bellows are well suited for those applications for low spring rate or cyclicalvibration applications. Standard materials include T304, 321, and 316 stainless steel, as well as Inconel,Monel, and other alloys. Meets MIL-E-17813F Type 1, Class 1 and Class 2.
MID-CORR BELLOWS HIGH-CORR BELLOWS
BASIC CONFIGURATIONS
FIXED FLANGE WELD ENDS VANSTONE (FLOATING)FLANGE
DUAL WITH CENTER BASE, FLANGED DUAL WITH CENTER BASE, WELD ENDS
46www.globalflexmfg.com (530) 229-1320 Toll Free: (877) 297-4673 Fax: (530) 229-1329 email: info@globalflexmfg.com
GGGlllooobbbaaalll --- FFFllleeexxx MMMfffggg...1244 Redwood Blvd. Redding, CA 96003
FLANGES - To insure pressure tight sealing, raiseface slip on flanges in full compliance With ANSI B
165 are standard. Flange material is either ASTM A-105 (Forged) or ASTM A36 (Plate). Lap joint flangescan be furnished as an option to permit easy alignment
of bolt holes. Alloy ends are available where additionalcorrosion resistance may be required.
INTERNAL/EXTERNAL GUIDES -Guiderings are welded to inner end of pipe and outer
cover. They are designed to provide accurateguiding of bellows as the pipeline expands orcontracts. This ensures bellows will not be scored
or subject to movement for which it was notdesigned to accommodate.
COVER- Designed forfull line pressure toinsure in the unlikelyevent of a bellows failure
media will not escaperadically outward.
DRAIN - Provides aconvenient locationfor installing a steamtrap. May also be usedto drain liquids whenpipeline is shut down.
BELLOWS -Single ormulti-ply bellows areprecision formed from
cylinders of deep drawquality annealed sheetconforming to ASTM
specifications - Type 304is standard and suitablefor most chloride free
applications such assteam, condensate, oil.Chill water where
chlorides may be present,Inconel 600 bellowsshould be specified.
BASE -Standard on double designs, optionalon single designs. Base is designed as a supportor intermediate anchor. Main anchor base
designed for full pressure thrust loading isoptional.
INTERNAL LINERS - Carbon steel pipe liners arestandard and designed to prevent bellows fatiguefailure due to flow-induced vibration.
EJEP EXTERNALLY PRESSURIZED EXPANSION JOINTS
DESIGNED WITH AN UNCOMPROMISING STANARD OF QUALITY FORYEARS OF MAINTENANCE FREE OPERATION IN DISTRIBUTION
PIPELINES CONVEYING LIQUIDS OR GASES.
Available in Single and double units for axial Compression up to 16 inches.150 lb and 300 lb design.Contact Global-Flex Mfg for details
47www.globalflexmfg.com (530) 229-1320 Toll Free: (877) 297-4673 Fax: (530) 229-1329 email: info@globalflexmfg.com
GGGlllooobbbaaalll --- FFFllleeexxx MMMfffggg...1244 Redwood Blvd. Redding, CA 96003
SERIES CM/CMSEXPANSION COMPENSATORS
DESCRIPTION & APPLICATIONS:Series CM/CMSExpansion compensators are the most economical choice for the compensation of thermalgrowth in small diameter piping systems. Global- Flex expansion compensators are commonly used in HVACsystems and other systems such as steam condensate. Series CM/CMS Expansion Compensators are a highpressure, externally pressurized design. Available in sizes from 3/4” through 4”. Style CM, male pipe threadedis for connection to steel piping, while Style CMS Sweat ends are for connection to copper tubing. The 2-plystainless steel bellows works in conjunction with an anti-torque device. All sizes permit 2” of axial motion.
DESIGN SPECIFICATIONS FOR MALE PIPEPressure
Pipe SizeInches
Number Max WPPSI
TestPSI
OverallLengthInches
OutsideDiam.Inches
SizeInches
EffectiveArea in Sq
Weight lbs
1 CM -100 200 300 12-1/8 3-1/2 1 3.5 7.01-1/4 CM -125 200 300 14-1/8 4 1-1/4 4.8 10.21-1/2 CM -150 200 300 14-1/8 4-1/2 1-1/2 6.5 12.3
2 CM -200 200 300 14-1/8 4-1/2 2 7.6 13.22-1/2 CM -250 200 300 15-1/2 5-1/2 2-1/2 12.9 19.6
3 CM -300 200 300 15-3/16 6-1/2 3 16.1 24.44” CM -400 200 300 15-3/16 7-3/32 4 24.2 27.5
DESIGN SPECIFICATIONS FOR MALE PIPE AND WELD ENDSPressure
Pipe SizeInches
Number Max WPPSI
TestPSI
OverallLengthInches
OutsideDiam.Inches
SizeInches
EffectiveArea in Sq
Weight lbs
1 CMS- 100 200 300 12-1/2 2-3/8 1 2.2 2.41-1/4 CMS- 125 200 300 13-13/16 2-3/4 1-1/4 3.5 3.11-1/2 CMS- 150 200 300 13-13/16 2-3/4 1-1/2 3.5 3.3
2 CMS- 200 200 300 13-13/16 3-3/4 2 6.5 5.52-1/2 CMS- 250 200 300 14-7/16 4-3/8 2-1/2 9.6 7.5
3 CMS- 300 200 300 14-7/16 5 3 12.9 10.0
48www.globalflexmfg.com (530) 229-1320 Toll Free: (877) 297-4673 Fax: (530) 229-1329 email: info@globalflexmfg.com
GGGlllooobbbaaalll --- FFFllleeexxx MMMfffggg...1244 Redwood Blvd. Redding, CA 96003
DESIGN SPECIFICATION FOR SERIES PBDesign Data
Working PressurePSIG
PipeSize
InchesModel
Number
OverallLengthInches
LiveLengthInches
FittingLengthInches
ApproxWt Lb 70 F 360 F
EffectiveareaSq In
2 PB-200 4-3/8 3-1/8 5/8 10-1/2 225 210 6.92-1/2 PB-250 4-3/8 3-1/8 5/8 10-1/2 225 210 6.9
3 PB-300 4-3/8 3-1/8 5/8 16-1/2 225 210 8.84 PB-400 4-5/8 3-1/8 3/4 26 225 210 15.15 PB-500 4-7/8 3-3/8 3/4 32 225 210 33.26 PB-600 5 3-1/2 3/4 37 225 210 33.28 PB-800 5-7/8 3-7/8 1 65 225 210 59.310 PB-1000 6-1/4 4-1/4 1 86 225 210 93.512 PB-1200 6-5/8 4-5/8 1 112 225 210 134.014 PB-1400 9-1/2 7 1 -1/4 183 225 210 171.016 PB-1600 10 7-1/2 1 -1/4 217 225 210 220.0
DESIGN SPECIFICATION FOR SERIES PBRDesign Data
Working PressurePSIGPipe Size
InchesModel
NumberOverallLengthInches
LiveLengthInches
FittingLengthInches
ApproxWt Lb 70 F 360 F
EffectiveareaSq In
2 PBR-200 6 4-3/4 5/8 20-1/2 225 210 6.92-1/2 PBR-250 6 4-3/4 5/8 24 225 210 6.9
3 PBR-300 6 4-3/4 5/8 25 225 210 8.84 PBR-400 6 4-1/2 3/4 35 225 210 15.15 PBR-500 6 4-1/2 3/4 38 225 210 33.26 PBR-600 6 4-1/2 3/4 41-1/2 225 210 33.28 PBR-800 6 4 1 68 225 210 59.310 PBR-1000 8 6 1 118 225 210 93.5
12 PBR-1200 8 6 1 147 225 210 134.014 PBR-1400 8 5-1/2 1 -1/4 205 225 210 171.016 PBR-1600 8 5-1/2 1 -1/4 233 225 210 220.018 PBR-1800 8 5-1/2 1 -1/4 234 225 210 279.020 PBR-2000 8 5 1 -1/2 312 225 210 342.0
24 PBR-2400 10 7 1 -1/2 380 225 210 493.0
SERIES PB & PBRBELLOWS PUMP CONNECTORS
Series PB & PBR Bellows Pump Connectors are designed to absorb noise and vibration generated bymechanical equipment. In addition, these compact length connectors will take-up axial and lateral motion. SeriesPB connectors utilize a highly flexible multi-ply Type 304 stainless steel bellows construction for greatermovement absorbing abilities and longer life. The longer Style PB-R is manufactured in the same lengths asstandard rubber pump connectors, and can offer substantial temperature and pressure advantages over rubberconnectors. Special 150# ANSI flanges and limit rods are carbon steel. Sizes range from 2” to 24” diameter.
49www.globalflexmfg.com (530) 229-1320 Toll Free: (877) 297-4673 Fax: (530) 229-1329 email: info@globalflexmfg.com
GGGlllooobbbaaalll --- FFFllleeexxx MMMfffggg...1244 Redwood Blvd. Redding, CA 96003
PIPE ALIGNMENT GUIDESSERIES PG
SPECIAL APPLICATIONS PRODUCTS
PGL LIGHT GUIDESFor low Pressure applications
HINGED SERIESEqual to Grinnell Fig 256
ANCHOR CLAMPS
BASEBOARDFIN- TUBE GUIDE
BASEBOARD ANCHOR PRE-INSERTEDPIPE HANGER INSERT
PTFE/STAINLESSGRAPHITE SLIDES
CONTACT GLOBAL- FLEX MFG FOR SPECIFICINFORMATION ON SIZE, DIMENSIONS, AND
APPLICATIONS FOR THESE PRODUCTS
50www.globalflexmfg.com (530) 229-1320 Toll Free: (877) 297-4673 Fax: (530) 229-1329 email: info@globalflexmfg.com
GGGlllooobbbaaalll --- FFFllleeexxx MMMfffggg...1244 Redwood Blvd. Redding, CA 96003
PIPE ALIGNMENT GUIDESSERIES PG
RECOMMENDATION FOR PLACEMENT
It is recommended that an expansion joint be located as near to an anchor as possible. The first guideshould be located within 4 pipe diameters of the expansion joint (see Figure 1). The second guide shouldbe located within 14 pipe diameters of the expansion joint. The remaining intermediate guides are placedat the approximate distance shown in the INTERMEDIATE GUIDE SPACING CHART.
INTERMEDIATE GUIDE SPACING CHART
51www.globalflexmfg.com (530) 229-1320 Toll Free: (877) 297-4673 Fax: (530) 229-1329 email: info@globalflexmfg.com
GGGlllooobbbaaalll --- FFFllleeexxx MMMfffggg...1244 Redwood Blvd. Redding, CA 96003
DESCRIPTION & APPLICATIONS:UNIVERSALThe universal design consists of dual bellows which are tied the entire length ofthe expansion joint. Universal expansion joints are typically used toaccommodate large amounts of lateral motion. When they are used inconjunction with 90 degree piping direction changes, they can be used in piperuns where extensive anchoring and guiding cannot be provided. Force requiredto offset is low provided adequate length is available. As the length between thebellows increases, the spring rate decreases.
HINGED & GIMBALEDIn applications where only angular movement is to be allowed, hinged andgimbaled expansion joints are the solution. Hinged joints are designed to take upangular motion in a single plane. Slotted hinge expansion joints permit axialmovement through use of a slot, and require main anchors. Gimbaled bellowswill allow angular motion in all planes. Hinged and gimbaled joints arecommonly used in combination to absorb various movements.
PRESSURE BALANCEDAn elbow style expansion joint designed for applications involving 90-degreechange in direction and applications where main anchors cannot be placed in thesystem. The elbow is permitted to float free of bellows thrust forces. Eithersingle or dual bellows pressure balanced is available. In-line pressure balancedexpansion joints are constructed for axial applications of straight runs of pipethat cannot provide main anchors to react to the pressure thrust of the expansionjoint.
SLIP-PAKSlip-Pak expansion joints are an excellent choice when a heavy duty, long-lifeproduct is needed to take up large amounts of axial motion. Movements can beabsorbed at high pressures and temperatures. These joints are internally andexternally guided. Long product life is assured by re-packing while in service.Meets MIL-E-F7814E. Available in single or dual configurations.
RECTANGULARRectangular metallic bellows expansion joints are fabricated to absorb vibrationand thermal movements in duct systems. High profile, low spring-ratecorrugations will allow for large amounts of movement in short face-to-facedesigns. Flanges can be either internal or external. A variety of alloys can beused to assure trouble-free operation in high temperature conditions. Axial,lateral, and angular movement can all be accommodated. Similar, low-pressurebellows are also manufactured for circular duct systems.
52
GGGlllooobbbaaalll ––– FFFllleeexxx MMMfffggg...Series 673-4700Stainless Steel
FlangedHose Assemblies
ConstructionTube: 321 Stainless SteelBraid: 304 Stainless SteelFlanges: Carbon Steel ANSI #150drilled plate flangesUnits are designed form pumpvibration plus 1/8 misalignment.* For pulsating pressure, reduceworking pressure by 50 percent
Working PressureSize
(Inches)
OverallLength
(Inches)
At70 Deg. F(PSIG)
At250 Deg.
F(PSIG)
1-1/2 9 410 3772 9 442 407
2-1/2 9 390 3593 9 310 2864 9 250 2305 11 185 1706 11 165 1518 12 220 20210 13 175 16112 14 160 14714 14 150 13816 14 110 10118 14 85 78
Temperature Correction FactorMultiply Working Pressure @ 70Deg F by Factor Listed Bellow
Temp Factor Temp Factor100 .99 450 .81150 .96 550 .76200 .94 650 .72250 .92 800 .66300 .89 1000 .60350 .86 1200 .55400 .84 1400 .40
53
GGGlllooobbbaaalll ––– FFFllleeexxx MMMfffggg...Series 673-40
Stainless SteelCarbon Steel MPTPump Connector
ConstructionTube: 321 Stainless SteelBraid: 304 Stainless SteelEnds: Carbon Steel Male PipeThread
* Units are designed for pumpvibration plus 1/8 misalignment.* For pulsating pressure, reduceworking pressure by 50 percent
Working PressureSize
(Inches)
OverallLength
(Inches)
At70 Deg. F
(PSIG)
At250 Deg.
F(PSIG)
1/2 6.5 825 760¾ 7 600 5521 8 580 534
1-1/4 8.5 450 4141-1/2 9 410 377
2 10.5 442 4072-1/2 12 390 359
3 14 310 2864 16 250 230
Temperature Correction FactorMultiply Working Pressure @ 70Deg F by Factor Listed Bellow
Temp Factor Temp Factor100 .99 450 .81150 .96 550 .76200 .94 650 .72250 .92 800 .66300 .89 1000 .60350 .86 1200 .55400 .84 1400 .40
54
GGGlllooobbbaaalll ––– FFFllleeexxx MMMfffggg...Series SNR-FLG
Stainless SteelFlanged ReducerPump Connector
ConstructionTube: 321 Stainless SteelBraid: 304 Stainless SteelFlanges: Carbon Steel ANSI #150drilled plate flangesBell Reducer Carbon Steel
* Units are designed for pumpvibration plus 1/8 misalignment.* For pulsating pressure, reduceworking pressure by 50 percent
Working PressureSize
(Inches)
OverallLength
(Inches)
At70 Deg. F(PSIG)
At250 Deg.
F(PSIG)
2-1/2x 2 13 442 4073 x 2 13 310 286
3 x 2-1/2 13 310 2864 x 2 13 250 230
4 x 2-1/2 13 250 2304 x 3 13 250 230
5 x 2-1/2 16 185 1705 x 3 16 185 1705 x 4 16 185 1706 x 3 17 165 1516 x 4 17 165 1516 x 5 17 165 1518 x 4 18 220 2028 x 5 18 220 2028 x 6 18 220 202
Temperature Correction FactorMultiply Working Pressure @ 70Deg F by Factor Listed Bellow
Temp Factor Temp Factor100 .99 450 .81150 .96 550 .76200 .94 650 .72250 .92 800 .66300 .89 1000 .60350 .86 1200 .55400 .84 1400 .40
OAL in
55
GGGlllooobbbaaalll ––– FFFllleeexxx MMMfffggg...Series 673-41-L
Stainless SteelCarbon Steel MPTPump Connector
ConstructionTube: 321 Stainless SteelBraid: 304 Stainless SteelEnds: Carbon Steel Male PipeThread
* Units are designed for pumpvibration plus 1/8 misalignment.* For pulsating pressure, reduceworking pressure by 50 percent
Working PressureSize
(Inches)
OverallLength
(Inches)
At70 Deg. F
(PSIG)
At250 Deg.
F(PSIG)
1/2 10.0 825 7603/4 11.0 600 5521 12.0 580 534
1-1/4 13.0 450 4141-1/2 14.0 410 377
2 15.0 442 407
Temperature Correction FactorMultiply Working Pressure @ 70Deg F by Factor Listed Bellow
Temp Factor Temp Factor100 .99 450 .81150 .96 550 .76200 .94 650 .72250 .92 800 .66300 .89 1000 .60350 .86 1200 .55400 .84 1400 .40
56
GGGlllooobbbaaalll ––– FFFllleeexxx MMMfffggg...PG-0000
673-5500Stainless Steel
Carbon Steel GroovedEnds
Construction Material
Tube: 321 Stainless SteelBraid: 304 Stainless SteelEnds: Carbon Steel Grooved
Units are designed for pumpvibration plus 1/8misalignment.For pulsating pressure reduceworking pressure by 50percent
Working PressureSize
(Inches)
OverallLength
(Inches)
At70 Deg. F
(PSIG)
At250 Deg.
F(PSIG)
2 12 442 4072-1/2 14 390 359
3 14 310 2864 15 250 2305 16 185 1706 16 165 1518 17 220 20210 18 175 16112 19 160 14714 14 150 13816 14 110 10118 14 85 78
Temperature Correction FactorMultiply Working Pressure @ 70Deg F by Factor Listed Bellow
Temp Factor Temp Factor100 .99 450 .81150 .96 550 .76200 .94 650 .72250 .92 800 .66300 .89 1000 .60350 .86 1200 .55400 .84 1400 .40
57
GGGlllooobbbaaalll ––– FFFllleeexxx MMMfffggg...PGF-0000
673-4500Stainless Steel
Carbon Steel GroovedEnds X 150 Flange
Construction MaterialTube: 321 Stainless SteelBraid: 304 Stainless SteelEnds: Carbon Steel Grooved X 150Carbon steel flange 150# drilling
Units are designed for pumpvibration plus 1/8misalignment.For pulsating pressure reduceworking pressure by 50
Working PressureSize
(Inches)
OverallLength
(Inches)
At70 Deg. F(PSIG)
At250 Deg.
F(PSIG)
2 12 442 4072-1/2 12 390 359
3 13 310 2864 13 250 2305 14 185 1706 14 165 1518 15 220 20210 16 175 16112 17 160 147
Temperature Correction FactorMultiply Working Pressure @ 70Deg F by Factor Listed Bellow
Temp Factor Temp Factor100 .99 450 .81150 .96 550 .76200 .94 650 .72250 .92 800 .66300 .89 1000 .60350 .86 1200 .55400 .84 1400 .40
58
GGGlllooobbbaaalll ––– FFFllleeexxx MMMfffggg...Series 673-1100
BronzeCopper- Sweat
Pump ConnectorConstruction
Tube: BronzeBraid: BronzeEnds: Copper sweat
* Units are designed for pumpvibration plus 1/8 misalignment.* For pulsating pressure, reduceworking pressure by 50 percent* UL Recognized
Working PressureSize
(Inches)
OverallLength
(Inches)
At70 Deg. F(PSIG)
At250 Deg.
F(PSIG)
1/2 6.5 735 632¾ 7 595 5111 8 460 395
1-1/4 8.5 430 3691-1/2 9 390 335
2 10.5 280 2402-1/2 12 185 159
3 12 185 146
Temperature Correction FactorMultiply Working Pressure @ 70Deg F by Factor Listed Bellow
Temp Factor Temp Factor100 .95 450 .75150 .92 550 --200 .89 650 --250 .86 800 --300 .83 1000 --350 .81 1200 --400 .78 1400 --
59
GGGlllooobbbaaalll ––– FFFllleeexxx MMMfffggg...Series 673-1100S
Stainless Steel HoseCopper- Sweat
Pump ConnectorConstruction
Tube: 321 Stainless SteelBraid: 304 Stainless SteelEnds: Copper sweat
* Units are designed for pumpvibration plus 1/8 misalignment.* For pulsating pressure, reduceworking pressure by 50 percent* UL Recognized
Working PressureSize
(Inches)
OverallLength
(Inches)
At70 Deg. F(PSIG)
At250 Deg.
F(PSIG)
1/2 6.5 735 6323/4 7 595 5111 8 460 395
1-1/4 8.5 430 3691-1/2 9 390 335
2 10.5 280 2402-1/2 12 185 159
3 12 185 146
Temperature Correction FactorMultiply Working Pressure @ 70Deg F by Factor Listed Bellow
Temp Factor Temp Factor100 .95 450 .75150 .92 550 --200 .89 650 --250 .86 800 --300 .83 1000 --350 .81 1200 --400 .78 1400 --
60
GGGlllooobbbaaalll ––– FFFllleeexxx MMMfffggg...Series 673-12
BronzeCopper-MPT
Pump ConnectorConstruction
Tube: BronzeBraid: BronzeEnds: Copper Male Pipe Thread
* Units are designed for pumpvibration plus 1/8 misalignment.* For pulsating pressure, reduceworking pressure by 50 percent
Working PressureSize
(Inches)
OverallLength
(Inches)
At70 Deg. F(PSIG)
At250 Deg.
F(PSIG)
1/2 6.5 735 6323/4 7 595 5111 8 460 395
1-1/4 8.5 430 3691-1/2 9 390 335
2 10.5 280 2402-1/2 12 185 159
3 12 185 146
Temperature Correction FactorMultiply Working Pressure @ 70Deg F by Factor Listed Bellow
Temp Factor Temp Factor100 .95 450 .75150 .92 550 --200 .89 650 --250 .86 800 --300 .83 1000 --350 .81 1200 --400 .78 1400 --
61
GGGlllooobbbaaalll ––– FFFllleeexxx MMMfffggg...Series 673-1500
Bronze BraidedVibration Absorbers
ConstructionTube: BronzeBraid: BronzeEnds: Copper sweat
* U.L. recognized through 3-1/8.* Units are cleaned, dehydrated andsealed in polyethylene bags.
Model Nom. To Fit Overall Length of Maximum ApproxNumber Hose Copper Tube Length Female Copper Working Wght
I.D. Actual O.D. Tube End Pressure (Lbs.)673-1502 1/4” 1/4” 7-1/2” 1/2” 450 psi .19673-1503 3/8” 3/8” 8-1/4” 5/8” 450 psi .25673-1504 3/8” 1/2” 9” 3/4” 450 psi .31673-1505 1/2” 5/8” 9-3/4” 7/8” 450 psi .44673-1506 1/2” 3/4” 10” 1” 450 psi .50673-1507 3/4” 3/4” 11-1/4” 1 -1/8” 340 psi 1.00673-1508 3/4” 7/8” 11-1/2” 1 -1/4” 340 psi 1.06673-1509 1” 1-1/8” 13” 1 -1/2” 302 psi 1.50673-1510 1-1/4” 1-3/8” 14-3/4” 1 -5/8” 280 psi 2.12673-1511 1-1/2” 1-5/8” 17” 2” 245 psi 3.41
673-1512** 2” * 2-1/8” 20” 2 -1/2” 190 psi 5.53673-1513** 2-1/2” 2-5/8” 24” 2-29/32” 320 psi 9.75673-1514** 3” 3-1/8” 27” 3-13/32” 302 psi 14.62673-1515** 3-1/2” * 3-5/8” 32” 3-29/32” 150 psi 22.25673-1516** 4” * 4-1/8” 33” 4-13/32” 150 psi 24.78
*For low side only. For heavy duty units consult Global-Flex**Stainless steel hose and braid, copper sweat ends.
62
GGGlllooobbbaaalll ––– FFFllleeexxx MMMfffggg...
661-2100EPDM
Double SphereTemp: 250 F
Vacuum Rating: 26 In. Hg.
Construction Material
Body Elastomer: EPDMReinforcement: Nylon tire-cordFlanges: Steel Rotating 150 lb
* Pressure is based on 180 degrees Fconstant temperatures. Contact Global-Flex
for pressures on higher operatingtemperatures
Movement RatingsSize Face to
FaceInches
FlangeThick
Inches
NumberOf
Holes
HoleDiameter
InchAxialComp
AxialElong
LateralDeflection
AngularDeflection
OperationPressure(PSIG)
Weight(Lbs)
1- 1/2 7 5/8 4 5/8 2.0 1.187 1.875 40 225 8.22 7 5/8 4 ¾ 2.0 1.187 1.875 40 225 9.0
2- 1/2 7 11/16 4 ¾ 2.0 1.187 1.875 40 225 13.33 7 11/16 4 ¾ 2.0 1.187 1.875 40 225 14.34 9 11/16 8 ¾ 2.25 1.375 1.625 35 225 20.35 9 13/16 8 7/8 2.25 1.375 1.625 35 225 24.56 9 7/8 8 7/8 2.25 1.375 1.625 35 225 29.58 13 7/8 8 7/8 2.5 1.375 1.75 30 225 43.810 13 15/16 12 1 2.5 1.375 1.75 30 225 64.112 13 15/16 12 1 2.5 1.375 1.75 30 225 95.014 13.75 1-1/32 12 1-1/8 2.5 1.375 1.5 30 15016 13.75 1-1/32 16 1-1/8 2.5 1.375 1.5 30 12518 13.75 1-3/16 16 1-1/4 2.5 1.375 1.5 30 12520 13.75 1-3/16 20 1-1/4 2.5 1.375 1.5 30 125
63
GGGlllooobbbaaalll ––– FFFllleeexxx MMMfffggg...
661-1100EPDM
Single SphereTemp: 250 F
Vacuum Rating: 26 In. Hg.
Construction Material
Body Elastomer: EPDMReinforcement: Nylon tire-cordFlanges: Steel Rotating 150 lb
* Pressure is based on 180 degrees Fconstant temperatures. Contact Global-Flex
for pressures on higher operatingtemperatures
Movement RatingsSize Face to
FaceInches
FlangeThickness
Inches
NumberOf
Holes
HoleDiameter Axial
CompAxialElong
LateralDeflection
AngularDeflection
OperationPressure(PSIG)
Weight(Lbs)
1-1/2 6 5/8 4 5/8 1-3/16 3/8 ½ 15 225 6.12 6 5/8 4 ¾ 1-3/16 3/8 ½ 15 225 8.9
2-1/2 6 11/16 4 ¾ 1-3/16 3/8 ½ 15 225 12.33 6 11/16 4 ¾ 1-3/16 3/8 ½ 15 225 14.04 6 11/16 8 ¾ 1-3/16 1/2 ½ 15 225 18.35 6 13/16 8 7/8 1-3/16 1/2 ½ 15 225 22.86 6 7/8 8 7/8 1-3/16 1/2 ½ 15 225 26.88 6 7/8 8 7/8 1-3/16 1/2 ½ 15 225 40.6
10 8 15/16 12 1 1-3/16 ¾ ¾ 15 225 56.612 8 15/16 12 1 1-3/16 ¾ ¾ 15 225 83.014 8 1-1/32 12 1-1/8 1-3/16 ¾ ¾ 15 150 115.016 8 1-1/32 16 1-1/8 1-3/16 ¾ ¾ 15 125 165.018 8 1-3/16 16 1-1/4 1-3/16 ¾ ¾ 15 125 168.020 8 1-3/16 20 1-1/4 1-3/16 ¾ ¾ 15 125 170.0
64
GGGlllooobbbaaalll ––– FFFllleeexxx MMMfffggg...
661-3100EPDM BellowUnion Ends
Temp: 250 F degVacuum Rating: 26 In. Hg.
Construction Material
Body Elastomer: NeopreneReinforcement: Nylon Tire CoreUnions Ends: Galvanized Steel
* Pressure is based on 180 degrees Fconstant temperatures. Contact Global-Flex
for pressures on higher operatingtemperatures
MOVEMENTS
Size OALInches
AxialComp
AxialElong
LateralDeflection
AngularDeflection
OperationPressure(PSIG)
Weight(Lbs)
¾ 8 7/8 ¼ 7/8 35 1501 8 7/8 ¼ 7/8 25 150
1-1/4 8 7/8 ¼ 7/8 25 1501-1/2 8 7/8 ¼ 7/8 20 150
2 8 7/8 ¼ 7/8 15 1502-1/2 8 7/8 ¼ 7/8 15 150
3 8 7/8 ¼ 7/8 15 150
65
GGGlllooobbbaaalll ––– FFFllleeexxx MMMfffggg...
661-1000Neoprene
Single SphereTemp: 180 F deg
Vacuum Rating: 26 In. Hg.
Construction Material
Body Elastomer: NeopreneReinforcement: Nylon tire-cordFlanges: Steel Rotating 150 lb
* Pressure is based on 180 degrees Fconstant temperatures. Contact Global-Flex
for pressures on higher operatingtemperatures
Movement RatingsSize Face to
FaceInches
FlangeThickInches
NumberOf
Holes
HoleDiameter Axial
CompAxialElong
LateralDeflection
AngularDeflection
OperationPressure(PSIG)
Weight(Lbs)
1-1/2 6 5/8 4 5/8 1-3/16 3/8 ½ 15 225 6.12 6 5/8 4 ¾ 1-3/16 3/8 ½ 15 225 8.9
2-1/2 6 11/16 4 ¾ 1-3/16 3/8 ½ 15 225 12.33 6 11/16 4 ¾ 1-3/16 3/8 ½ 15 225 14.04 6 11/16 8 ¾ 1-3/16 1/2 ½ 15 225 18.35 6 13/16 8 7/8 1-3/16 1/2 ½ 15 225 22.86 6 7/8 8 7/8 1-3/16 1/2 ½ 15 225 26.88 6 7/8 8 7/8 1-3/16 1/2 ½ 15 225 40.6
10 8 15/16 12 1 1-3/16 ¾ ¾ 15 225 56.612 8 15/16 12 1 1-3/16 ¾ ¾ 15 225 83.014 8 1-1/32 12 1-1/8 1-3/16 ¾ ¾ 15 150 115.016 8 1-1/32 16 1-1/8 1-3/16 ¾ ¾ 15 125 165.018 8 1-3/16 16 1-1/4 1-3/16 ¾ ¾ 15 125 168.020 8 1-3/16 20 1-1/4 1-3/16 ¾ ¾ 15 125 170.0
66
GGGlllooobbbaaalll ––– FFFllleeexxx MMMfffggg...
661-2000Neoprene
Double SphereTemp: 180 F deg
Vacuum Rating: 26 In. Hg.
Construction Material
Body Elastomer: NeopreneReinforcement: Nylon tire-cordFlanges: Steel Rotating 150 lb
* Pressure is based on 180 degrees Fconstant temperatures. Contact Global-Flex
for pressures on higher operatingtemperatures
Movement RatingsSizeInch MM
Face toFace
Inches
FlangeThickInches
NumberOf
Holes
HoleDiameter Axial
CompAxialElong
LateralDeflection
AngularDeflection
OperationPressure(PSIG)
Weight(Lbs)
1-1/2 40 7 5/8 4 5/8 2.0 1.187 1.875 40 225 8.22 50 7 5/8 4 ¾ 2.0 1.187 1.875 40 225 9.0
2-1/2 65 7 11/16 4 ¾ 2.0 1.187 1.875 40 225 13.33 80 7 11/16 4 ¾ 2.0 1.187 1.875 40 225 14.34 100 9 11/16 8 ¾ 2.25 1.375 1.625 35 225 20.35 125 9 13/16 8 7/8 2.25 1.375 1.625 35 225 24.56 150 9 7/8 8 7/8 2.25 1.375 1.625 35 225 29.58 200 13 7/8 8 7/8 2.5 1.375 1.75 30 225 43.8
10 250 13 15/16 12 1 2.5 1.375 1.75 30 225 64.112 300 13 15/16 12 1 2.5 1.375 1.75 30 225 95.014 355 13.75 1-1/32 12 1-1/8 2.5 1.375 1.5 30 15016 400 13.75 1-1/32 16 1-1/8 2.5 1.375 1.5 30 12518 450 13.75 1-3/16 16 1-1/4 2.5 1.375 1.5 30 12520 500 13.75 1-3/16 20 1-1/4 2.5 1.375 1.5 30 125
67
GGGlllooobbbaaalll ––– FFFllleeexxx MMMfffggg...
661-3000Neoprene Bellow
Union EndsTemp: 180 F deg
Vacuum Rating: 26 In. Hg.
Construction Material
Body Elastomer: NeopreneReinforcement: Nylon Tire CoreUnions Ends: Galvanized Steel
* Pressure is based on 180 degrees Fconstant temperatures. Contact Global-Flex
for pressures on higher operatingtemperatures
MOVEMENTS
SizeInches
SizeMM
OALInches
AxialComp
AxialElong
LateralDeflection
AngularDeflection
OperationPressure(PSIG)
Weight(Lbs)
¾ 20 8 7/8 ¼ 7/8 35 1501 25 8 7/8 ¼ 7/8 25 150
1-1/4 32 8 7/8 ¼ 7/8 25 1501-1/2 40 8 7/8 ¼ 7/8 20 150
2 50 8 7/8 ¼ 7/8 15 1502-1/2 65 8 7/8 ¼ 7/8 15 150
3 80 8 7/8 ¼ 7/8 15 150
68
GGGlllooobbbaaalll ––– FFFllleeexxx MMMfffggg...
STYLE-MDRMolded RubberExpansion Joint
Temp: 225FVacuum Rating: 30 In. Hg.
Construction Material
Body Elastomer : EPDMReinforcement: Radial CordFlanges: Duck and Rubber 150#Drilling
MOVEMENTS
SizeFace to
FaceInches
FlangeThickInches
NumberOf
Holes
HoleDiameter
AxialComp
AxialElong
LateralDeflection
AngularDeflection
OperationPressure(PSIG)
Weight(Lbs)
2 6 7/16 4 ¾ 1.5 .90 .75 35 225 3.82-1/2 6 7/16 4 ¾ 1.5 .90 .75 30 225 3.8
3 6 7/16 4 ¾ 1.5 .90 .75 30 225 44 6 7/16 8 ¾ 1.5 .90 .75 30 225 5.55 6 7/16 8 7/8 1.5 .90 .75 26 225 5.86 6 7/16 8 7/8 1.5 .90 .75 26 225 68 6 7/16 8 7/8 1.5 .90 .75 20 225 9
10 8 5/8 12 1 2.0 1.2 1.0 26 225 1812 8 5/8 12 1 2.0 1.2 1.0 26 225 25
69
GGGlllooobbbaaalll ––– FFFllleeexxx MMMfffggg...664-1000
CONTROLUNITS
SINGLE & DOUBLEARCH
Construction MaterialRods : Carbon SteelControl Rod Plate: Carbon SteelDrilling: Meets 125 and 150 lb.Standard –Other Drill Available
Notes–1) Calculations are a based on 65% ofyield of the rods
2) *FSA Recommends Minimum number ofrods for indicated pipe size
Pressures RatingsMax Design or Test Pressure of System
Size Plate O.D.Inches
RodDiameter
Inches
NumberOf
Holes
HoleDiameter Two Units Three
UnitsFourUnits
Weight(Lbs)
Per Unit
1-1/4 7-3/4 3/8 4 5/8 *830 - - 6.5
1-1/2 8-1/8 3/8 4 ¾ *510 - - 6.5
2 9-3/4 3/8 4 ¾ *661 - - 6.5
2-1/2 10-3/4 3/8 4 ¾ *529 - - 7.5
3 11-1/4 3/8 8 ¾ *441 - - 8.0
4 12- 11/16 3/8 8 7/8 *311 467 622 8.0
5 13- 11/16 3/8 8 7/8 *235 353 470 8.06 14- 11/16 ½ 8 7/8 *186 278 371 10.0
8 17-7/16 ½ 12 1 *163 244 326 13.0
10 20-1/2 1 12 1 *163 244 375 16
12 23- 11/16 1 12 1-1/8 *160 240 320 16
14 25- 13/16 1 16 1-1/8 *112 167 223 2016 29 1 16 1-1/4 *113 170 227 2018 30-1/2 1 20 1-1/4 *94 141 187 21
20 33 1 *79 118 158 21
70
GGGlllooobbbaaalll ––– FFFllleeexxx MMMfffggg...
660-4710Bellows Pump
ConnectorConstruction Material
Bellows: 2-Ply A240-304 StainlessSteelTie Rods:Carbon steel 3 -rodsFlanges: Triangular Tie-RodsFlanges- 150 Lb ASA Drilling.Carbon SteelVacuum: Full* Comply with EJMA Standards
MovementsSizeInch
Face toFace
Inches
LiveLengthInches
FittingLengthInches
EffectiveAreaInchSq
AxialCompression
AxialElongation
LateralDeflection
OperationPressure(PSIG)@ 70-Degrees
Weight(Lbs)
2 4-3/8 3-1/8 5/8 6.9 ½ 1/8 1/8 225 10.52- 1/2 4-3/8 3-1/8 5/8 6.9 ½ 1/8 1/8 225 14.5
3 4-3/8 3-1/8 5/8 8.8 ½ 1/8 1/8 225 16.54 4-3/8 3-1/8 ¾ 15.1 ½ 1/8 1/8 225 265 4-7/8 3-3/8 ¾ 33.2 ½ 1/8 1/8 225 326 5 3-1/2 ¾ 33.2 ½ 1/8 1/8 225 378 5-7/8 3-7/8 1 59.3 ½ 1/8 1/8 225 6510 6-1/4 4-1/4 1 93.5 ½ 1/8 1/8 225 8612 6-5/8 4-5/8 1 134.0 ½ 1/8 1/8 225 11214 9-1/2 7 1-1/4 171.0 ½ 1/8 1/8 225 183
71
GGGlllooobbbaaalll ––– FFFllleeexxx MMMfffggg...
660-4720Bellows Pump
ConnectorConstruction Material
Bellows: 2-Ply A240-304 StainlessSteelTie Rods:Carbon steel 3 -rodsFlanges: Triangular Tie-RodsFlanges- 150 Lb ASA Drilling.Carbon SteelVacuum: Full
MovementsSizeInch
Face toFace
Inches
LiveLengthInches
FittingLengthInches
EffectiveAreaInchSq
AxialCompression
AxialElongation
LateralDeflection
OperationPressure(PSIG)@ 70-Degrees
Weight(Lbs)
2 6 4-3/4 5/8 6.9 15/16 5/16 3/8 225 20.52- 1/2 6 4-3/4 5/8 6.9 15/16 5/16 5/16 225 24
3 6 4-3/4 5/8 8.8 15/16 5/16 ¼ 225 254 6 4-1/2 ¾ 15.1 15/16 5/16 3/16 225 355 6 4-1/2 ¾ 33.2 15/16 5/16 3/16 225 386 6 4-1/2 ¾ 33.2 15/16 5/16 1/8 225 41.58 6 4 1 59.3 ¾ ¼ 3/32 225 6810 8 6 1 93.5 1- 1/4 3/8 1/8 225 11812 8 6 1 134.0 1- 1/4 3/8 1/8 225 147
72
GGGlllooobbbaaalll ––– FFFllleeexxx MMMfffggg...EJEP-4”& 8”
AXIAL TRAVELEXTERNALLY PRESSURIZED
Construction MaterialBellows: Type 304 Stainless SteelPipe Shell: Carbon Steel Sch 40Flanges: Carbon Steel 150 LbdrillingDrain Port: Carbon SteelOperating Pressure: 150 PsigVacuum Rating: Full
Over All Length
Carbon steelPlate Flange
150 Lb drilling
StandardWall PipeEquivalentToNominalSize
Drain Port for Trap in Steam Service
Axial MovementSizeInch
Over allLngthInches
FlangeDrillingANSI
CompInches
ExtendInches
SpringRate
Lbs/Inch
Shell ODInches
Center ToBase
Inches
BellowsArea
Sq Inch
OperatingPressure
PSIG
WeightLbs
2 25 150 Lb 4 1.0 194 5-9/16 4-1/2 12 150 512-1/2 23-1/2 150 Lb 4 .75 194 5-9/16 4-1/2 12 150 52
3 22-1/4 150 Lb 4 .75 252 6-5/8 5 16 150 634 22-3/4 150 Lb 4 .75 425 8-5/8 6-1/4 30 150 994 38-1/2 150 Lb 8 1.50 212 8-5/8 6-1/4 30 150 1446 21-1/2 150 Lb 4 .75 570 10-3/4 7-1/2 53 150 1446 33-3/4 150 Lb 8 1.50 285 10-3/4 7-1/2 53 150 1918 22-1/2 150 Lb 4 .75 1212 12-3/4 8-1/2 83 150 2288 35-3/4 150 Lb 8 1.50 606 12-3/4 8-1/2 83 150 302
10 23-3/4 150 Lb 4 1.00 1065 16 10-1/4 135 150 30610 40 150 Lb 8 2.00 533 16 10-1/4 135 150 43412 24-1/2 150 Lb 4 1.00 1217 18 11-1/4 182 150 40012 41-3/4 150 Lb 8 2.00 609 18 11-1/4 182 150 467
73
GGGlllooobbbaaalll ––– FFFllleeexxx MMMfffggg...660-5000
ExpansionCompensator
MPTConstruction Material
Bellows: Two-Ply 304 Stainless SteelPipe/Shell: Carbon Steel Sch-401Ends: Carbon Steel MPTVacuum: Full
* For proper operation, expansioncompensators must be properlyanchored and guided
Pressure RatingSizeInch
OverallLengthInches
OutsideDiam.Inches
EffectiveArea InchSquared
AxialSpring
RateInches
AxialMovement
InchesMax
WorkingTest
Weight(Lbs)
¾ 12-1/8 3- 1/8 2.2 122 2 200 300 5.51 12-1/8 3- 1/8 3.5 122 2 200 300 7.0
1-1/4 14-1/8 3- 1/8 4.8 160 2 200 300 10.21-1/2 14-1/8 3- 1/8 6.5 160 2 200 300 12.3
2 14-1/8 3- 3/8 7.6 269 2 200 300 13.22-1/2 15-1/2 3- 1/2 12.9 348 2 200 300 19.6
3 15-3/16 3- 7/8 16.1 398 2 200 300 24.44 15-3/16 4- 1/4 24.2 402 2 200 300 27.5
74
GGGlllooobbbaaalll ––– FFFllleeexxx MMMfffggg...660-5100
ExpansionCompensatorCopper Sweat
Construction Material
Bellows: Two-Ply 304 Stainless SteelPipe/Shell: Stainless SteelEnds: Female Copper SweatVacuum: Full
* For proper operation, expansioncompensators must be properlyanchored and guided
Pressure RatingSizeInch
OverallLengthInches
OutsideDiam.Inches
EffectiveArea InchSquared
AxialSpring
RateInches
AxialMovement
InchesMax
WorkingTest
Weight(Lbs)
¾ 12-1/2 2- 3/8 2.2 122 2 200 300 2.21 12-1/2 2- 3/8 2.2 122 2 200 300 2.4
1-1/4 13-13/16 2- 3/4 3.5 160 2 200 300 3.11-1/2 13-13/16 2- 3/4 3.5 160 2 200 300 3.3
2 13-13/16 3- 3/4 6.5 269 2 200 300 5.52-1/2 14-7/16 4- 3/8 9.6 348 2 200 300 7.5
3 14-7/16 5 12.9 398 2 200 300 10.0
75
GGGlllooobbbaaalll ––– FFFllleeexxx MMMfffggg...MULTI-PLY
STAINLESSSTEEL
BELLOWSTemp: 200 DEG F
Pressure Rating: 150 PSIVacuum Rating: 26 In. Hg.
Construction Material
Bellows: Two ply 321 stainless steelFlanges: Carbon Steel A-105 plate150 # drillingLiner Required: No
MOVEMENT RATINGS
SizeOverallLengthInches
FlangeOD
Inches
NumberOf
Holes
HoleDiameter
Inches
AxialCompInches
AxialElongInches
LateralDeflection
AxialSpring
Rate
OperationPressure(PSIG)
Weight(Lbs)
3 7.625 7- 1/2 4 ¾ 1.10 .125 .52 799 2203-1/2 7.625 8- 1/2 8 ¾ 1.10 .125 .46 519 150
4 8.625 9 8 ¾ 1.20 .125 .44 610 1805 9.250 10 8 7/8 1.30 .125 .44 569 1506 9.625 11 8 7/8 1.60 .125 .48 625 1508 11.375 13-1/2 8 7/8 2.00 .125 .59 699 15010 11.375 16 12 1 2.30 .125 .53 354 8012 11.375 19 12 1 2.80 .125 .53 422 80
Higher pressure ratings, Temperature, axial and lateral movements availably--- Contact Global-Flex for technical dataPipe size 14 to 24 available contact Global-Flex for technical dataMulti-ply bellows available contact Global-Flex for technical dataBellows are manufactured in accordance with Expansion Joint Manufacturing Association Inc. ( EJMA 5thedition)
76
GGGlllooobbbaaalll ––– FFFllleeexxx MMMfffggg...Seismic ConnectorSC-21-2-CSFLGDesigned For 2”
MotionTemp: 800 deg F
Vacuum Rating: 26 In. Hg.
Construction MaterialHose: Type 321 Stainless SteelBraid: Type 304 Stainless SteelEnds: Carbon Steel Plate FlangeElbows: Carbon Steel
Note- Drain port recommended whenusing in steam system.
PressureRatings
AllowableMotions
Size Model Number
OverallLengthOALInches
LiveLength
LLInches
Height
HInches
ApproxSpringForceLbs Oper.
psiTestpsi
X orZ
Y
1-1/2 SC21-150 -CSFLG-12.5-2 28 12-1/2 12-3/4 75 530 745 2” 2”
2 SC21-200 -CSFLG-14.0-2 32 14 14-1/2 82 535 803 Same Same
2-1/2 SC21-250 -CSFLG-14.5-2 35 14-1/2 15-1/2 86 395 593 Same Same
3 SC21-300 -CSFLG-16.5-2 39-3/4 16-1/2 17-3/4 93 385 578 Same Same
4 SC21-400 -CSFLG-18.0-2 45-3/4 18 20-1/4 127 270 405 Same Same
5 SC21-500 -CSFLG-20.0-2 53 20 23 214 225 337 Same Same
6 SC21-600-CSFLG-21.5.0 -2 59-1/4 21-1/2 25-3/4 228 170 255 Same Same
8 SC21-800 -CSFLG-24.0-2 71-1/4 24 30-1/2 312 235 353 Same Same
10 SC21-1000 -CSFLG-27.0-2 84 27 35-1/2 345 260 390 Same Same
12 SC21-1200 -CSFLG-28.5-2 94-3/4 28-1/2 39-1/2 399 160 240 Same Same
77
GGGlllooobbbaaalll ––– FFFllleeexxx MMMfffggg...Seismic ConnectorSC-21-3-CSFLGDesigned For 3”
MotionTemp: 800 deg F
Vacuum Rating: 26 In. Hg.
Construction MaterialHose: Type 321 Stainless SteelBraid: Type 304 Stainless SteelEnds: Carbon Steel Plate FlangeElbows: Carbon Steel
Note- Drain port recommended whenusing in steam system.
PressureRatings
AllowableMotions
Size Model Number
OverallLengthOAL
Inches
LiveLength
LLInches
Height
HInches
ApproxSpringForceLbs Oper.
psiTestpsi
X orZ
Y
1-1/2 SC21-150-CSFLG-15.5-3 32-1/4 15-1/2 14-3/4 75 530 745 3” 3”
2 SC21-200-CSFLG-17.0-3 36-1/4 17 16-1/2 82 535 803 Same Same
2-1/2 SC21-250-CSFLG-18.0-3 40 18 18 86 395 593 Same Same
3 SC21-300-CSFLG-21.75-3 44-3/4 21-3/4 21-/12 93 385 578 Same Same
4 SC21-400-CSFLG-22.0-3 51-1/2 22 23 127 270 405 Same Same
5 SC21-500-CSFLG-24.5-3 59-1/4 24-1/2 26-1/4 214 225 337 Same Same
6 SC21-600-CSFLG-26.5-3 66-1/4 26-1/2 29-1/4 228 170 255 Same Same
8 SC21-800-CSFLG-29.5-3 79 29-1/2 34-1/4 312 235 353 Same Same
10 SC21-1000-CSFLG-33.5-3 93-1/4 33-1/2 40 345 260 390 Same Same
12 SC21-1200-CSFLG-35.5-3 104-3/4 35-1/2 44-1/2 399 160 240 Same Same
78
GGGlllooobbbaaalll ––– FFFllleeexxx MMMfffggg...Seismic ConnectorSC-21-4-CSFLGDesigned For 4”
MotionTemp: 800 deg F
Vacuum Rating: 26 In. Hg.
Construction MaterialHose: Type 321 Stainless SteelBraid: Type 304 Stainless SteelEnds: Carbon Steel Plate FlangeElbows: Carbon SteelNote- Drain port recommended whenusing in steam system.
PressureRatings
AllowableMotions
Size Model Number
OverallLengthOAL
Inches
LiveLength
LLInches
Height
HInches
ApproxSpringForceLbs Oper
psi.Testpsi
X orZ
Y
1-1/2 SC21-150-CSFLG-18.0-4 35-3/4 18 16-1/2 75 530 745 4” 4”
2 SC21-200-CSFLG-20.0-4 40-1/2 20 18-3/4 82 535 803 Same Same
2-1/2 SC21-250-CSFLG-20.5-4 43-1/2 20-1/2 19-3/4 86 395 593 Same Same
3 SC21-300-CSFLG-23.5-4 49-3/4 23-1/2 22-3/4 93 385 578 Same Same
4 SC21-400-CSFLG-25.0-4 56-1/2 25-1/2 25-1/2 127 270 405 Same Same
5 SC21-500-CSFLG-28.5-4 65 28-1/2 29 214 225 337 Same Same
6 SC21-600-CSFLG-30.5-4 72 30-1/2 32 228 170 255 Same Same
8 SC21-800-CSFLG-34.0-4 85-1/2 34 37-1/2 312 235 353 Same Same
10 SC21-1000-CSFLG-38.5 -4 100-1/4 38-1/2 43-3/4 345 260 390 Same Same
12 SC21-1200-CSFLG-41.0 -4 112-1/4 41 48-1/2 399 160 240 Same Same
79
GGGlllooobbbaaalll ––– FFFllleeexxx MMMfffggg...Seismic ConnectorSC-21-2-CSMPT
Designed For 2”Motion
Temp: 800 FVacuum Rating: 26 In. Hg.
Construction MaterialHose: Type 321 S tainless SteelBraid: Type 304 Stainless SteelEnds: Carbon Steel MPTElbows: Carbon SteelNote- Drain port recommended whenusing in steam system.
PressureRatings
AllowableMotions
Size Model Number
OverallLengthOALInches
LiveLength
LLInches
Height
HInches
ApproxSpringForceLbs Oper.
psiTestpsi
X orZ
Y
½ SC21-050-CSMPT-9.0- 2 22-1/4 9 9-1/4 35 1335 2003 2” 2”
¾ SC21-075-CSMPT-10.0-2 23-1/4 10 9-3/4 41 1135 1703 Same Same
1 SC21-100-CSMPT-11.0-2 27-1/2 11 10-3/4 45 795 1193 Same Same
1-1/4 SC21-125-CSMPT-12.0-2 29-3/4 12 12 64 610 2440 Same Same
1-1/2 SC21-150-CSMPT-12.5-2 31-1/2 12-1/2 12-1/2 68 530 745 Same Same
2 SC21-200-CSMPT-14.0-2 35-1/2 14 14-1/2 82 535 803 Same Same
2-1/2 SC21-250-CSMPT-14.5-2 39-1/2 14-1/2 15-1/2 86 395 593 Same Same
3 SC21-300-CSMPT-16.5-2 45-1/4 16-1/2 17-3/4 93 385 578 Same Same
4 SC21-400-CSMPT-18.0-2 53-1/4 18 20 127 270 405 Same Same
80
GGGlllooobbbaaalll ––– FFFllleeexxx MMMfffggg...Seismic ConnectorSC-21-3-CSMPT
Designed For 3”Motion
Temp: 800 FVacuum Rating: 26 In. Hg.
Construction MaterialHose: Type 321 Stainless SteelBraid: Type 304 Stainless SteelEnds: Carbon Steel MPTElbows: Carbon Steel
Note- Drain port recommended whenusing in steam system.
PressureRatings
AllowableMotions
Size Model Number
OverallLengthOAL
Inches
LiveLength
LLInches
Height
HInches
ApproxSpringForceLbs Oper.
PSITestPSI
X orZ
Y
½ SC21-050-CSMPT-11.5-3 24-3/4 11-1/2 11 35 1335 2003 3” 3”
¾ SC21-075-CSMPT-12.5-3 27-1/4 12-1/2 11-1/2 41 1135 1703 Same Same
1 SC21-100-CSMPT-13.5-3 31 13-1/2 12-3/4 45 795 1193 Same Same
1-1/4 SC21-125-CSMPT-14.5-3 33-1/2 14-1/2 13-3/4 64 610 2440 Same Same
1-1/2 SC21-150-CSMPT-15.5-3 35-3/4 15-1/2 14-3/4 68 530 745 Same Same
2 SC21-200-CSMPT-17.0-3 39-3/4 17 16-1/2 82 535 803 Same Same
2-1/2 SC21-250-CSMPT-18.0-3 44-1/2 18 18 86 395 593 Same Same
3 SC21-300-CSMPT-20.0-3 50-1/4 20 20 93 385 578 Same Same
4 SC21-400-CSMPT-22.0-3 59 22 22 127 270 405 Same Same
81
GGGlllooobbbaaalll ––– FFFllleeexxx MMMfffggg...Seismic ConnectorSC-21-4-CSMPT
Designed For 4”Motion
Temp: 800 FVacuum Rating: 26 In. Hg.
Construction MaterialHose: Type 321 Stainless SteelBraid: Type 304 Stainless SteelEnds: Carbon Steel MPTElbows: Carbon Steel
Note- Drain port recommended whenusing in steam system.
PressureRatings
AllowableMotions
Size Model Number
OverallLengthOALInches
LiveLength
LLInches
Height
HInches
ApproxSpringForceLbs Oper.
psiTestpsi
X orZ
Y
½ SC21-050-CSMPT-13.5-4 28-1/2 13-1/2 12-1/4 35 1335 2003 4” 4”
¾ SC21-075-CSMPT-15.0-4 30-3/4 15 13-1/4 41 1135 1703 Same Same
1 SC21-100-CSMPT-16.0-4 34-1/2 16 14-1/2 45 795 1193 Same Same
1-1/4 SC21-125-CSMPT-17.0-4 37 17 15-1/2 64 610 2440 Same Same
1-1/2 SC21-150-CSMPT-18.0-4 39-1/4 18 16-1/2 68 530 745 Same Same
2 SC21-200-CSMPT-20.0-4 44 20 18-1/2 82 535 803 Same Same
2-1/2 SC21-250-CSMPT-20.50-4 48 20-1/2 22-3/4 86 395 593 Same Same
3 SC21-300-CSMPT-23.5-4 55-1/4 23-1/2 25-1/2 93 385 578 Same Same
4 SC21-400-CSMPT-25.5-4 64 25.5 25-1/2 127 270 405 Same Same
82
GGGlllooobbbaaalll ––– FFFllleeexxx MMMfffggg...Seismic ConnectorSC-21-2-CSGVD
Designed For 2”Motion
Temp: 800 FVacuum Rating: 26 In. Hg.
Construction MaterialHose: Type 321 Stainless SteelBraid: Type 304 Stainless SteelEnds: Carbon Steel GroovedElbows: Carbon SteelNote- Drain port recommended whenusing in steam system.
PressureRatings
AllowableMotions
Size Model Number
OverallLengthOALInches
LiveLength
LLInches
Height
HInches
ApproxSpringForceLbs Oper.
psiTestpsi
X orZ
Y
½ SC21-050-CSGVD-9.0-2 22-1/4 9 9-1/4 35 1335 2003 2” 2”
¾ SC21-075-CSGVD-10.0-2 23-1/4 10 9-3/4 41 1135 1703 Same Same
1 SC21-100-CSGVD-11.0-2 27-1/2 11 10-3/4 45 795 1193 Same Same
1-1/4 SC21-125-CSGVD-12.0-2 29-3/4 12 12 64 610 2440 Same Same
1-1/2 SC21-150-CSGVD-12.5-2 31-1/2 12-1/2 12-1/2 68 530 745 Same Same
2 SC21-200-CSGVD-14.0-2 35-1/2 14 14-1/2 82 535 803 Same Same
2-1/2 SC21-250-CSGVD-14.5-2 39-1/2 14-1/2 15-1/2 86 395 593 Same Same
3 SC21-300-CSGVD-16.5-2 45-1/4 16-1/2 17-3/4 93 385 578 Same Same
4 SC21-400-CSGVD-18.0-2 53-1/4 18 20 127 270 405 Same Same
83
GGGlllooobbbaaalll ––– FFFllleeexxx MMMfffggg...Seismic ConnectorSC-21-3-CSGVD
Designed For 3”Motion
Temp: 800 FVacuum Rating: 26 In. Hg.
Construction MaterialHose: Type 321 Stainless SteelBraid: Type 304 Stainless SteelEnds: Carbon Steel GroovedElbows: Carbon Steel
Note- Drain port recommended whenusing in steam system.
PressureRatings
AllowableMotions
Size Model Number
OverallLengthOALInches
LiveLength
LLInches
Height
HInches
ApproxSpringForceLbs Oper
psiTestpsi
X orZ
Y
½ SC21-050-CSGVD-11.5-3 24-3/4 11-1/2 11 35 1335 2003 3” 3”
¾ SC21-075-CSGVD-12.5-3 27-1/4 12-1/2 11-1/2 41 1135 1703 Same Same
1 SC21-100-CSGVD-13.5-3 31 13-1/2 12-3/4 45 795 1193 Same Same
1-1/4 SC21-125-CSGVD-14.5-3 33-1/2 14-1/2 13-3/4 64 610 2440 Same Same
1-1/2 SC21-150-CSGVD-15.5-3 35-3/4 15-1/2 14-3/4 68 530 745 Same Same
2 SC21-200-CSGVD-17.0-3 39-3/4 17 16-1/2 82 535 803 Same Same
2-1/2 SC21-250-CSGVD-18.0-3 44-1/2 18 18 86 395 593 Same Same
3 SC21-300-CSGVD-20.0-3 50-1/4 20 20 93 385 578 Same Same
4 SC21-400-CSGVD-22.0-3 59 22 22 127 270 405 Same Same
84
GGGlllooobbbaaalll ––– FFFllleeexxx MMMfffggg...Seismic ConnectorSC-21-4-CSGVD
Designed For 4”Motion
Temp: 800 FVacuum Rating: 26 In. Hg.
Construction MaterialHose: Type 321 Stainless SteelBraid: Type 304 Stainless SteelEnds: Carbon Steel GroovedElbows: Carbon Steel
Note- Drain port recommended whenusing in steam system.
PressureRatings
AllowableMotions
Size Model Number
OverallLengthOALInches
LiveLength
LLInches
Height
HInches
ApproxSpringForceLbs Oper.
psiTestpsi
X orZ
Y
½ SC21-050-CSGVD-13.5-4 28-1/2 13-1/2 12-1/4 35 1335 2003 4” 4”
¾ SC21-075-CSGVD-15.0-4 30-3/4 15 13-1/4 41 1135 1703 Same Same
1 SC21-100-CSGVD-16.0-4 34-1/2 16 14-1/2 45 795 1193 Same Same
1-1/4 SC21-125-CSGVD-17.0-4 37 17 15-1/2 64 610 2440 Same Same
1-1/2 SC21-150-CSGVD-18.0-4 39-1/4 18 16-1/2 68 530 745 Same Same
2 SC21-200-CSGVD-20.0-4 44 20 18-1/2 82 535 803 Same Same
2-1/2 SC21-250-CSGVD-20.50-4 48 20-1/2 22-3/4 86 395 593 Same Same
3 SC21-300-CSGVD-23.5-4 55-1/4 23-1/2 25-1/2 93 385 578 Same Same
4 SC21-400-CSGVD-25.5-4 64 25.5 25-1/2 127 270 405 Same Same
85
GGGlllooobbbaaalll ––– FFFllleeexxx MMMfffggg...Seismic ConnectorSC-11-2-Brn Sweat
Designed For 2”Motion
Temp: 450 deg FVacuum Rating: 26 In. Hg.
Construction MaterialHose: BronzeBraid: BronzeEnds: Coppe r SweatElbows: Copper
PressureRatings
AllowableMotions
Size Model Number
OverallLengthOALInches
LiveLength
LLInches
Height
HInches
ApproxSpringForceLbs
Oper.psi
Testpsi
XorZ
Y
½ SCB11- 050-BSWT-9.0-2 22- 1/4 9 9-1/4 35 1335 2003 2” 2”
¾ SCB11-075-BSWT-10.0-2 23- 1/4 10 9-3/4 41 1135 1703 Same Same
1 SCB11-100-BSWT-11.0-2 27- 1/2 11 10-3/4 45 795 1193 Same Same
1-1/4 SCB11-125-BSWT-12.0-2 29- 3/4 12 12 64 610 2440 Same Same
1-1/2 SCB11-150-BSWT-12.5-2 31- 1/2 12-1/2 12-1/2 68 530 745 Same Same
2 SCB11-200-BSWT-14.0-2 35- 1/2 14 14-1/2 82 535 803 Same Same
2-1/2 SCB11-250-BSWT-14.5-2 29- 1/2 14-1/2 15-1/2 86 395 593 Same Same
3 SCB11-300-BSWT-16.5-2 45- 1/4 16-1/2 17-3/4 93 385 578 Same Same
4* SC21- 400-BSWT-18.0-2 53- 1/4 18 20 127 270 405 Same Same
* Note- 4” is constructed using Stainless Steel hose braid, Sch-10 stainless steel fittings and Bronze sweat ends
86
GGGlllooobbbaaalll ––– FFFllleeexxx MMMfffggg...Seismic ConnectorSC-11-3-Brn Sweat
Designed For 3”Motion
Temp: 450 deg FVacuum Rating: 26 In. Hg.
Construction MaterialHose: BronzeBraid: BronzeEnds: Copper SweatElbows: Copper
PressureRatings
AllowableMotions
Size Model Number
OverallLengthOALInches
LiveLength
LLInches
Height
HInches
ApproxSpringForceLbs Oper.
psiTestpsi
X orZ
Y
½ SCB11-050-BSWT-12-3 23- 1/4 12 11-1/2 35 725 1088 3” 3”
3/4 SCB11-075-BSWT-12.5-3 26- 1/4 12-1/2 12-1/2 41 625 938 Same Same
1 SCB11-100-BSWT-13.0-3 28 13 13 45 425 638 Same Same
1-1/4 SCB11-125-BSWT-14.0-3 31 14 14 65 425 638 Same Same
1-1/2 SCB11-150-BSWT-14.5-3 32- 1/2 14-1/2 15 70 350 525 Same Same
2 SCB11-200-BSWT-16.5-3 36- 3/4 16-1/2 16-1/2 80 275 413 Same Same
2-1/2 SCB11-250-BSWT-18.0-3 44- 1/2 18 18 86 395 593 Same Same
3 SCB11-300-BSWT-20.0-3 50- 1/4 20 20 93 385 578 Same Same
4* SC21- 400-BSWT-22.0-3 59 22 22 127 270 405 Same Same
* Note 4” constructed using Stainless Steel hose/braid Sch-10 stainless steel fittings – and Bronze sweat ends
87
GGGlllooobbbaaalll ––– FFFllleeexxx MMMfffggg...Seismic ConnectorSC-11-4-Brn Sweat
Designed For 4”Motion
Temp: 450 deg FVacuum Rating: 26 In. Hg.
Construction MaterialHose: BronzeBraid: BronzeEnds: Copper SweatElbows: Copper
PressureRatings
AllowableMotions
Size Model Number
OverallLengthOALInches
LiveLength
LLInches
Height
HInches
ApproxSpringForce
Lbs Oper.psi
Testpsi
X orZ
Y
½ SCB11-050-BSWT-14.0-4 26-1/2 14 12-1/2 35 725 1088 4” 4”
3/4 SCB11-075-BSWT-15.0-4 30 15 14 41 625 938 Same Same
1 SCB11-100-BSWT-15.5-4 31-3/4 15-1/2 15 45 425 638 Same Same
1-1/4 SCB11-125-BSWT-16.5-4 34-1/2 16-1/2 16 65 425 638 Same Same
1-1/2 SCB11-150-BSWT-17.0-4 36 17 16-1/2 70 350 525 Same Same
2 SCB11-200-BSWT-18.5-4 40-1/4 18-1/2 18-1/2 80 275 413 Same Same
2-1/2 SCB11-250-BSWT-22.75-4 48 20-1/2 22-3/4 86 395 593 Same Same
3 SCB11-300-BSWT-23.5-4 55-1/4 23-1/2 25-1/2 93 385 578 Same Same
4* SC21-400-BSWT-25.5-4 64 25.5 25-1/2 127 270 405 Same Same
* Note 4” is constructed using Stainless Steel hose/braid ,Sch-10 stainless steel fittings & Bronze sweat ends
1244 Redwood Blvd. Redding CA 96003Phone (530) 229-1320 Fax (530) 229 -1329
E -mailinfo@globalflexmfg.com
GGGlllooobbbaaalll ––– FFFllleeexxx MMMfffggg...STYLE-GFTC
FLU-DUCTEXPANSION JOINTS
GFTC Expansion Joints are Non-Metallic Flue Duct Expansion Joints or flexible connectors, which whenproperly designed, provide stress relief for piping and ducting systems by absorbing thermal growth & shock ,isolating mechanical vibration and allowing for misalignments.
Flue duct expansion joints are custom engineered products designed to handle low-pressure (±5 psig)applications with temperatures from -100 F to +2000 deg. F. The expansion joints are manufactured usinginnovative non-metallic materials and designs.
INDUSTRIES AND APPLICATIONSPower Generation:Fossil Fired Plants Combined Cycle Plants Industrial Gas Turbines CF Bs (Fluidized Bed Boilers) NuclearPlantsPulp & Paper Plants:Chemical Applications Paper Processing Power and Recovery Boilers Fans/Blowers
Petrochemical:By product Incineration. Elevated Temperatures (2,000 degrees F) Severe Chemical Attack RefineriesEnvironmental ApplicationsSCR & Nox Systems Waste Water Treatment Plants Waste & Recycling Incinerators Stack & Chimney SealsCEMs
Heavy Industrial:Foundries Steel Mills Cement Plants Aluminum Plants Kilns & Smelters
Others:HVAC Marine Food Processing HRSG / Co-generation Chemical Processing
DESIGN ADVANTAGES OF NON-METALLIC DUCTINGEXPANSION JOINTS
1. Large movement capability I Multi-planemovements.2. Corrosion I Chemical Resistance3. Range of Design Temperature Capability (-110F to +2000 F)4. Negligible Spring Rates / Loads
5. Vibration Dampening & Sound Attenuation6. Lower Overall Costs (Design, Installation,Replacement & Repair)7. Easily Repairable / Installable8. High Cycle Life9. Unique Application Solutions
1244 Redwood Blvd. Redding CA 96003Phone (530) 229-1320 Fax (530) 229 -1329
E -mailinfo@globalflexmfg.com
GGGlllooobbbaaalll ––– FFFllleeexxx MMMfffggg...APPLICATIONSIndustrial applications can be separated into general categories based on the media composition (Air or Gas) and temperature. Thefollowing section is designed to aid in the selection of the appropriate expansion joint for the specific application range. All plantsare different, therefore the service locations and temperatures may vary This section is only a guide and should be confirmed with aGlobal-Flex Engineer.
AMBIENT AIR SERVICES (-40 degrees F to 150 degrees F)Ambient temperature clean air without particulate or chemicals to damage the flexibleelement. Expansion Joint is used frequently for vibration and sound attenuation from fanequipment
Locations: FD Fan Inlet/OutletService Air Intakes
Primary Air Fan to Air HeaterPrimary Air to Recovery Boiler
An integrally flanged elastomeric joint is suggested. Either Neoprene or EPDM singlelayer belts are frequently used
HOT AIR SERVICES (500 degrees F to 800 degrees F)Clean air after coming in contact with hot flue gases at the Air Pre- Heater where temperaturesare elevated with minimal particulate and/or gas carryover. Expansion joint will see thermalmovements and vibration. Elevated temperatures require a composite flexible element and aflow liner.
Locations: Air Heater Air Outlet OverFire Air Fans
Secondary AirFan Mill Air
A flat composite belt with a bolt or weld-in frame design and flow liner is suggested.The weld-in outboard angle frame design with field welded flow liner is shown.
LOW TO MODERATE TEMPERATURE FLUE GASSERVICES (150 degree F to 600 degree F)Flue gas which has passed through an air pre-heater and dust collector to reduce thetemperature and particulate levels. Flue gas may cycle near the dew point wherecondensation can occur and chemicals are present Expansion joint may see thermalmovements, vibration and chemical attack
Locations: Precip. OutletI D Fan Inlet/Outlet
Scrubber Inlet / OutletHRSG Outlet
Re-heaterInlet/Outlet
A single layer belt with chemical barrier is suggested in either integrally flanged or flatbelt type. Such as the weld-in outboard angle frame design and Teflon® coated singlelayer belt with gas film shown.
HOT FLUE GAS SERVICES (600 Degree F to 1200 Degree F)Flue gas directly after combustion stage at elevated temperatures with possible particulatepresent. Expansion Joint is used for possible large thermal movements at elevatedtemperaturesLocations: Economizer Outlet
Cyclone Inlet! OutletPrecip Inlet
Recovery Boiler OutletAir Heater Gas Inlet/OutletGas Re-circulation System
High temperature composite flat belt style with setback frames, cavity pillow and flowliners is suggested. The standard “Z” frame design with telescoping flow liners or “J”frame design with shop liner are two designs frequently used in these applications
1244 Redwood Blvd. Redding CA 96003Phone (530) 229-1320 Fax (530) 229 -1329
E -mailinfo@globalflexmfg.com
GGGlllooobbbaaalll ––– FFFllleeexxx MMMfffggg...STYLE REJ SPOOLHAND BUILT WIDE ARCH DESIGNEXPANSION JOINT
For demanding applications, andexcessive pipe movements, Global -FlexStyle REJ-Spool wide arch expansionjoints provide greater flexibility andlonger service life.
Global-Flex style REJ expansion joints are theultimate in quality hand-built construction. Premiumgrade elastomers provide long service life in the mostdemanding applications For superior performance andpressure ratings Global-Flex style REJ expansionjoints have a minimum 4 to 1 safety factor built in totheir rated operating pressures.
Global-Flex style REJ expansion joints offer animproved ‘wide arch’ design. Face -to-facemeasurements of the Global-Flex style REJexpansion joints are equal to that of standard or multi -arch joints, but will accommodate much greatermovements.
The Global-Flex style REJ expansion joints aremanufactured domestically, with premium gradematerials. Construction consists of a tube, integralduck and rubber flanges, carcass, internal steelreinforcements, cover, and steel reta ining rings. Thetube consists of a single piece of leak proof liningextending flange -to-flange. Carcass construction is astrong, biasply, high- strength woven polyester fabricbetween the tube and cover. The fabric is thoroughlyimpregnated with a special friction compound to givemaximum adhesion under pressure, vacuum, andstress conditions. Special steel rings imbedded in thecarcass provide strength while under pressure orvacuum. Also the wide arch design provides a self-flushing profile, reducing turbulence, and sedimentbuild -up
The Global-Flex style REJ comes standard with achlorobutyl tube and a Hypalon 1 cover Theseelastomers provide excellent resistance against heatand a wide variety of fluids . The standard Hypaloncover, ve rsus Hypalon paint, provides extra protectionagainst abrasion, ozone, weathering, heat and manychemicals.
Other elastomers available are gum, natural rubber,EPDM, Nitrile, Neoprene, Viton1 , and Teflon1.Galvanized steel split retaining rings are standard, butcan also be ordered in stainless steel.
Global-Flex style REJ are available in filled arches,multiple arches, sleeve type, tapered (eccentric orconcentric) and offset constructions. Requirements ofup to 50% greater pressures and/or temperatures up to400 degrees F can also be accommodated Global-Flexstyle REJ expansion joints can be manufactured inaccordance with ASTM designation Fl 123 -87 andmeet all USCG requirements for shipboard service.Control unit assemb lies are always recommended inunanchored systems and in connection to springmounted equipment. Properly installed, these unitswill protect against excessive elongation, and withoptional sleeve, against over-compression—both ofwhich can seriously damage rubber expansion joints.
1244 Redwood Blvd. Redding CA 96003Phone (530) 229-1320 Fax (530) 229 -1329
E -mailinfo@globalflexmfg.com
GGGlllooobbbaaalll ––– FFFllleeexxx MMMfffggg...STYLE REJ SPOOL
Hand-Built Wide ArchExpansion JointGlobal-Flex style REJ expansion joints aremanufactured to meet or exceed the pressure,movement, and dimensional ratings of the RubberExpansion Joint Division, Fluid SealingAssociation.
SPECIFICATIONS
ALLOWABLE MOVEMENTS/WEIGHTSSTYLE REJ SINGLE ARCH
MOVEMENTS
SIZE FACE TO FACEWORKINGPRESSURE
COMPRESSION(Inches)
ELONGATION(Inches)
LATERAL(Inches)
ANGULARDEGREE
WEIGHT(LBS)RINGS
INCLUDED2 6 225 1.75 .75 .75 35 8.0
2-1/2 6 225 1.75 .75 .75 30 10.03 6 225 1.75 .75 .75 30 11.54 6 225 1.75 .75 .75 25 15.55 6 225 1.75 .75 1.00 25 17.06 6 225 1.75 .75 1.00 20 20.08 6 225 1.75 .75 1.00 20 27.0
10 8 225 1.75 .75 1.00 15 39.012 8 225 1.75 .75 1.00 13 56.014 8 225 1.75 .75 1.00 11 65.016 8 160 1.75 .75 1.00 10 74.018 8 160 1.75 .75 1.00 9 85.020 8 130 1.75 .75 1.00 8 102.022 10 130 1.75 .75 1.00 7.8 114.024 10 130 1.75 1.00 1.00 7 125.0
STYLE REJ AVAILABLE IN SIZES UP TO 96” CONTACT GLOBAL-FLEX MFG
Temperature Limits for Continues Service MINIMUM FACE –TO- FACE DIMENSIONS
REJ 250 deg FREJ SINGLE
F/F (INCH)REJ-D
F/F (INCH)REJ-T
F/F (INCH)REJ HT 300 deg F ½ to 6 6 12 16REJ V 400 deg F 8 6 12 18
10 8 16 2012 8 16 20ALL JOINTS ARE RATED FOR FULL
VACUUM SERVICE 14 to 20 8 16 2022 to 30 10 16 22
GGGlllooobbbaaalll ––– FFFllleeexxx MMMfffggg...STYLE 712/713
CONVOLUTED TEFLON BELLOWSOVERVIEW:Convoluted Teflon bellows expansion joints and flexible couplers offer the best combination of low spring-rateflexibility and the chemical inert properties of PTFE material. Style 712 2-Convolute Flexible Coupling, and Style 7133-Convolute Expansion Joint were designed to meet the needs of the high-technology, chemical-petrochemical,power generation, pulp and paper, and other demanding industry needs. Teflon bellows connectors are versatile andwill 1) absorb pipe movements and stress; 2) isolate mechanical vibration; 3) reduce system noise; 4) protect againstsurge forces.
The construction of the connector utilizes 2, 3, or even 5 molded convolutions of white PTFE. These convolutions arereinforced with metallic rings between the bellows for pressure rating and stability. The metal backing flanges areprotected by the lip of the Teflon bellows, so that all wetted surfaces are Teflon. Steel limit rods are factory installed.Additional convolutions provide greater movement capability. Options include Type 316 stainless steel backingflanges and hardware, white epoxy coated flanges, and high-purity cleaning and packaging. 700 series expansionjoints can also be manufactured in a machined, accordion style.
Allowable Movements
Longitudinal Movement Angular ParallelStyle Pipe
SizeNeutralLength
MinimumCompressed
MaximumExpanded
Max.Misalign
ment
Max.Misalign
mentDegrees Offset
#713 1-1/2” 2-3/4” 2-1/4” 3-1/4” 34 1/4”
#712 1-1/2” 2” 1-3/4” 2-1/4” 19 1/8”#713 2” 3 -1/4’ 2-3/4” 3-3/4” 28 3/8”#712 2” 2-1/2” 2-1/8” 2-7/8” 21 1/8”#713 2-1/2” 3-1/4” 2-3/4” 3-3/4” 22 3/8”#712 2-1/2” 2-1/2” 2-1/8” 2-7/8” 17 1/8”#713 3” 3-1/4” 2-3/4” 3-3/4” 20 3/8”#712 3” 2-1/2” 2-1/8” 2-7/8” 14 1/8”#713 4” 4” 3-1/4” 4-3/4” 20 1/2”#712 4” 3” 2-1/2” 3-1/2” 14 1/4”#713 5” 4” 3-1/4” 4-3/4” 12 1/2”#712 5” 3” 2-1/2” 3-1/2” 11 1/4”#713 6” 4” 3-1/4” 4-3/4” 14 1/2”
#712 6” 3” 2-1/2” 3-1/2” 10 1/4”#713 8” 4” 3-1/4” 4-3/4” 14 1/2”#712 8” 3” 2-1/2” 3-1/2” 7 1/4”#713 10” 5” 4” 6” 12 5/8”#712 10” 3-3/4” 3-1/8” 4-3/8” 7 1/4”#713 12” 5” 4” 6” 10 5/8”#712 12” 3-3/4” 3-1/8” 4-3/8” 6 1/4”
Maximum Travel is based on installation with no Misalignment orAngular Deflection.Maximum Misalignment is based on installation with no Travel orAngular Deflection.Combined Travel and Misalignment are proportionately lower foreach type of deflection according to the percentage of themaximum that is required for the other.
For high -purity water and other high-purity applications, specify Class 100cleaning and packaging. Type 316stainless steel or white epoxy coatedhardware should be considered in theseapplications.
Ideal for plastic linedpiping systems….
GGGlllooobbbaaalll ––– FFFllleeexxx MMMfffggg...700 SERIES TEFLON CONNECTORS
PRESSURE vs. TEMPERATURE
The graphs below indicate that Style # 713 expansion joints, like other expansion joints, and Style # 712 flexiblecouplings drop in pressure rating as the temperature increases. It is important to note however, that burst pressure ofStyle # 713 joints (or that pressure at which bellows failure normally occurs) is approximately four times that of theirworking pressure. Please consult our staff for modifications if pressure and temperatures in your application exceedthose shown below.
Style # 713 3-Convolute Style # 712 2-Convolute
Molded Expansion Joint Size Molded Flexible Coupling Size
Series 700 Connector -- DimensionsANSI Standard Holes
Size No. of Holes Thread Bolt Circle Flange O.D. Flare Face Flange Thickness Approx. Wght.1-1/2” 4 1/2”-13 3-7/8” 5” 2-3/4” 3/8” 3.00 lbs.
2’ 4 5/8”-11 4-3/4” 6’ 3-1/2” 7/16” 8.50 lbs.2-1/2” 4 5/8”-11 5-1/2’ 7’ 4’ 1/2” 11.25 lbs.
3’ 4 5/8”-11 6” 7 -1/2” 5” 11/16” 19.75 lbs.4’ 8 5/8”-11 7-1/2” 9” 6” 11/16’ 26.00 lbs.5” 8 3/4”-10 8-1/2” 10” 7” 11/16” 28.00 lbs.6” 8 3/4”-10 9-1/2” 11” 8’ 11/16’ 28.00 lbs.8” 8 3/4”-10 11 -3/4’ 13-1/2” 10-1/4’ 7/8’ 48.00 lbs.
10” 12 7/8”-9 14 -1/4’ 16’ 12-1/4’ 1’ 68.00 lbs.12” 12 7/8”-9 17’ 19” 14-1/2’ 1” 95.00 lbs.
Vacuum Service – Style #712 or #713
#713 #712
1244 Redwood Blvd. Redding CA 96003Phone (530) 229-1320 Fax (530) 229 -1329
E -mailinfo@globalflexmfg.com
GGGlllooobbbaaalll ––– FFFllleeexxx MMMfffggg...STYLE-HP
FIRE RETARDANTHEAT PUMP HOSE ASSEMBLY
Global-Flex Mfg. now provides you with superior, Fire Retardant Hose Assemblies ofunparalleled quality and integrity, designed specifically for your water source heat pumpapplications. Our specially coated braid protects the tube from exterior abrasion andprevents rusting. Assemblies are available in any length. Style HP provides you a hosewith a long life of trouble-free service.
Global-Flex Mfg. Style HP Advantages:
Superior abrasion resistant properties from our coated wire braid.The “washer-less” design of the swivel end provides you with ease ofinstallation.Superior water flow capabilities, due to excellent flexibility of the hose, whichalso minimizes the possibility of kinking.All male pipe threads are shipped with thread sealant already applied(eliminating the need for Teflon tape), capped and ready for installation.Plated steel fittings and adapters reduce the possibility of over-torquing, acommon problem with brass and other soft metals.
Specifications ½” ¾” 1” 1-1/4”Working Pressure 400 psi 300 psi 500 psi 400 psi
Min Burst @ 70degrees F
1,600 psi 1,200 psi 2,000 psi 1,600 psi
Min Bend Radius 2.5” 4” 5.5” 10”
Hose O.D. .700 .975 1.245 1.580Temperatre Range -40/+200 F 40/+200 F 40/+200 F 40/+200 F
Weight Per 100 Foot 18.3 # 24.4” 38.8” 57 #
Your fire-rated water source applications have never been more secure than now, with HP FireRetardant Hose Assemblies. Our tube compound is tested to and meets UL-94 with a VO Rating,the highest standard in the industry. The patented process, which bonds the tube to a stainless steelwire outer braid, minimizes the possibility of the hose assembly kinking during installation.