Meeting 10 – 2/12/16

Week by Week Semester Schedule

Each Week• Read Chapter Sections

• Watch YouTube Tutorial

• Build the Hardware

• Write the Code

• Test it/Troubleshoot

• Bring it and show us!

• Take Pictures/Video!

• **Alter the Code

Chapter-by-Chapter Content http://exploringarduino.com/content/

Video Tutorials https://www.youtube.com/playlist?list=PLA567CE235D39FA84

Chapter 1: Getting Up and Blinking with the Arduino

Chapter 1 Content

Full Chapter 1 Excerpt

Install Arduino IDE

Chapter 1: Getting Up and Blinking with the Arduino

Chapter 1: Getting Up and Blinking with the Arduino

Chapter 1: Getting Up and Blinking with the Arduino

Chapter 2: Digital Inputs, Outputs, and Pulse-Width Modulation

Chapter 2: Digital Inputs, Outputs, and Pulse-Width Modulation

Breadboard

Chapter 2: Digital Inputs, Outputs, and Pulse-Width Modulation

• Wiring LED with Breadboard

• Reading Digital Inputs: LED control

with a Button

• Bouncy Buttons

• Change LED Brightness• www.exploringarduino.com/content/ch2

Chapter 2: Digital Inputs, Outputs, and Pulse-Width Modulation

Wiring LED with Breadboard• LEDs allow current to flow from the anode (positive, longer

end) to the cathode(negative, shorter end).

• Anode connects to the current source (a 5V digital signal).

• Cathode connects to the ground.

• The resistor can be inserted in on either side of the LED.

• Resistors are not polarized, orientation does not matter

Chapter 2: Digital Inputs, Outputs, and Pulse-Width Modulation

Questions?

For next week:• Read Chapter 2: Digital Inputs, Outputs, and Pulse-Width

Modulation

• Complete all three Ch 2 projects

• *Additional: Watch the video tutorials - https://www.youtube.com/watch?v=_LCCGFSMOr4&list=PLA567CE235D39FA84&index=2

Happy Valentine's DayHave a fantastic long weekend!