Post on 23-May-2022
Test of 1D carbon-carbon composite prototype tiles for the SPIDER diagnosticcalorimeterG. Serianni, A. Pimazzoni, A. Canton, M. Dalla Palma, R. Delogu, D. Fasolo, L. Franchin, R. Pasqualotto, and M.Tollin
Citation: AIP Conference Proceedings 1869, 060007 (2017);View online: https://doi.org/10.1063/1.4995794View Table of Contents: http://aip.scitation.org/toc/apc/1869/1Published by the American Institute of Physics
Articles you may be interested in Progress on development of SPIDER diagnosticsAIP Conference Proceedings 1869, 030020 (2017); 10.1063/1.4995740
Acquisition, data retrieval, interlock and control systems for the negative ion source NIO1AIP Conference Proceedings 1869, 060006 (2017); 10.1063/1.4995793
Development of an energy analyzer as diagnostic of beam-generated plasma in negative ion beam systemsAIP Conference Proceedings 1869, 060005 (2017); 10.1063/1.4995792
A first characterization of the NIO1 particle beam by means of a diagnostic calorimeterAIP Conference Proceedings 1869, 030028 (2017); 10.1063/1.4995748
Improvements of the versatile multiaperture negative ion source NIO1AIP Conference Proceedings 1869, 030007 (2017); 10.1063/1.4995727
Experimental validation of an innovative deflection compensation method in a multi-beamlet negative-ionacceleratorAIP Conference Proceedings 1869, 030026 (2017); 10.1063/1.4995746
Test of 1D carbon-carbon composite prototype tiles for the SPIDER diagnostic calorimeter
Abstract.
INTRODUCTION
a)Corresponding author: Gianluigi.Serianni@igi.cnr.it
Fifth International Symposium on Negative Ions, Beams and Sources (NIBS 2016)AIP Conf. Proc. 1869, 060007-1–060007-7; doi: 10.1063/1.4995794
Published by AIP Publishing. 978-0-7354-1549-2/$30.00
060007-1
Figure 1.
Figure 2.
060007-2
TEST OF THERMAL PROPERTIES BY LASER IRRADIATION
Figure 3.
Figure 4
060007-3
Figure 5. Δ
Figure 6.
060007-4
Figure 7.
Figure 8.
FINITE ELEMENT SIMULATIONS
060007-5
Figure 9.
CONCLUSIONS
060007-6
ACKNOWLEDGMENTS
REFERENCES
84
85
88
1515
85
1655
1655
85
060007-7