FP-7500 / FP-3500 Parts List€¦ · FP-9222 Parts List 6 FOR TECHNICAL SUPPORT CONTACT TBC...

Post on 07-Aug-2020

0 views 0 download

Transcript of FP-7500 / FP-3500 Parts List€¦ · FP-9222 Parts List 6 FOR TECHNICAL SUPPORT CONTACT TBC...

FP-7500 / FP-3500 Parts List

FOR TECHNICAL SUPPORT CONTACT TBC CONSOLES 1-888-266-7653 (support@tbcconsoles.com)

3

Monitor Arm

75/100 mm VESA

Adapter Plate (B)

Monitor Arm Tilter (A)

10-32 x 3/8" Philips Flat

Head Screw (4-pack) (C)

Dog Washer (E)M4 x 12mm Philips Pan

Head Screw (4-pack) (D)

10-32 x 3/8" PFhMS

w/Lock Patch (F)

3/32" Allen Wrench (H)7/32" Allen Wrench (G)

Forearm Cap (I) Cable Cap (K)Endcap Bumper (J)

FP-7500 / FP-3500 Installation Instructions

4

FOR TECHNICAL SUPPORT CONTACT TBC CONSOLES 1-888-266-7653 (support@tbcconsoles.com)

Step #1 Step #2 Step #3

Step #4 Step #5 Step #6

Step #7

FP-7500 / FP-3500 CounterBalance

FOR TECHNICAL SUPPORT CONTACT TBC CONSOLES 1-888-266-7653 (support@tbcconsoles.com)

5

Step #1

Step #2

IMPORTANT!

- Monitor must be on arm

- Arm must be in mount

Press the arm down to

approximately parallel with the

desk prior to turning the strength

adjustment screw.

If the arm drifts upward, turn the

adjustment screw clockwise.

If the arm drifts downward, turn

the adjustment screw clockwise.

Depending on the weight of your

monitor, you may have to make

15-20 turns.

In some instances, further

counterbalance adjustments

are needed to allow the arm's

instant height adjustment function

to work properly.

If your arm is not staying in

position after performing step 1,

follow these steps:

With arm in raised position,

tighten set screw (A).

With arm in horizontal position,

tighten set screw (B).

Do not over tighten screws.

FP-9222 Parts List

6

FOR TECHNICAL SUPPORT CONTACT TBC CONSOLES 1-888-266-7653 (support@tbcconsoles.com)

75/100 mm VESA

Adapter Plate (F)

Monitor Arm Tilter (E)

10-32 x 3/8" Philips Flat

Head Screw (4-pack) (G)

Dog Washer (I)M4 x 12mm Philips Pan

Head Screw (4-pack) (H)

10-32 x 3/8" PFhMS

w/Lock Patch (J)

3/32" Allen Wrench (A)

7/32" Allen Wrench (K)

10-32 x 1/2"

Thumbscrew (B)

Collar (C)

Pole Cap (D)

Cable Clip (L)

Monitor

Arm14" Pole

FOR TECHNICAL SUPPORT CONTACT TBC CONSOLES 1-888-266-7653 (support@tbcconsoles.com)

7

FP-9222 Installation Instructions

Step #1 Step #2 Step #3

Step #4 Step #5 Step #6

Step #8Step #7 Step #9