Post on 04-Jun-2018
Beauty & Personal Care Applications
Formulation Information
Formulation InformationBeauty & Personal Care Applications
Attributes• Good spreadability• Leaves a non-greasy film• Powdery feel• Radiance• Silky smooth
Products• XIAMETER® PMX-0245
Cyclopentasiloxane• Dow Corning® SH 200 C
Fluid 6 CS
Multipurpose Radiance – Asian Skin ToneFace Illuminator: Radiance, Silky Smooth
Ingredient Weight % Trade Name / Supplier
Phase A
1. Sorbitan Stearate2. Ozokerite
3. Dimethicone
4. Cyclopentasiloxane
5. Tridecyl Isononanoate
25
5
28.15
5
Span 60 / UniqemaOzokerite Wax / Stahl & Pitsch, Inc.Dow Corning® SH 200 C Fluid 6 CSXIAMETER® PMX-0245 CyclopentasiloxaneCrodamol TN / Croda, Inc.
Phase B
6. Mica
7. Methylmethacrylate Crosspolymer
8
2
Submica N / LCW SensientCovabead LH 85 / LCW Sensient
Phase C
8. Water9. Butylene Glycol
10. Methylparaben
19.75
0.15
1,3-Butylene Glycol / No Supplier SpecifiedNipagin M / Clariant Corporation
Phase D
11. Mica (and) Titanium Dioxide (and) Iron Oxides (and) Triethoxycaprylylsilane
20 OTS-2 Timiron MP-29 / Daito
Procedure1. Heat Phase A and Phase C separately to 80ºC.2. Add Phase B to Phase A with mixing.3. Add Phase C to the mixture and keep stirring
until homogeneous.4. Slowly add Phase D to mixture with continued
mixing.5. Pour into suitable containers while hot.6. Cool down to room temperature.
StabilityStable for at least 2 months at room temperature and 40ºC. Well sealed packaging is required to avoid shrinkage.
Multipurpose Radiance – Asian Skin Tonecontinued
Formulation InformationBeauty & Personal Care Applications
Attributes• Enhanced formula texture• Increase Substantivity• Smooth after feel• Elastic chewing gum texture• Rich nourishing emolliency
Products• XIAMETER® PMX-1501 Fluid• XIAMETER® PMX-0245
Cyclopentasiloxane• Dow Corning® 5225C Formulation Aid
• Dow Corning® HMW 2220 Non-ionic Emulsion
Pink-a-Chew CreamWater-in-Silicone Skin Cream: Elastic Chewing Gum Texture, Rich Nourishing Emolliency
Procedure1. Mix ingredients of Phase A together.2. Mix ingredients of Phase B together.3. Add Phase B slowly (drop by drop) to Phase A with continuous agitation.4. Homogenize using a high shear mixer.
StabilityStable for 3 months at room temperature.
Ingredient Weight % Trade Name / Supplier
Phase A
1. Cyclopentasiloxane (and) PEG/PPG-18/18 Dimethicone
2. Cyclomethicone
3. Cyclopentasiloxane (and) Dimethiconol
10
8.6
10
Dow Corning® 5225C Formulation Aid
XIAMETER® PMX-0245 CyclopentasiloxaneXIAMETER® PMX-1501 Fluid
Phase B
4. Divinyldimethicone / Dimethicone Copolymer (and) C12-13 Pareth-3 (and) C12-13 Pareth-23
5. Sodium Chloride6. Distilled Water7. Red 40
8. Fruity Delight M_53995
5
2to 100q.s.
q.s.
Dow Corning® HMW 2220 Non-ionic Emulsion
FD&C Red 40 W 093 / LCW Les colorants Wackherr S.A.Fruity Delight M_53995 / V.Mane Fils S.A.
Formulation InformationBeauty & Personal Care Applications
Attributes• Smooth after feel• Water-in-oil emulsion• Enhance formula texture
Products• XIAMETER® PMX-200
Silicone Fluid 5CS• Dow Corning® 5200 Formulation Aid
• Dow Corning® AMS-C30 Cosmetic Wax
White DelightWater-in-Oil Skin Cream: Enhance Formula Texture
Procedure1. Mix Phase A ingredients together.2. Heat Phase A ingredients to 80ºC.3. Mix Phase B ingredients together.4. Heat Phase B to 80ºC with mixing.5. Slowly add Phase B to Phase A with turbulent mixing.6. Homogenize using a high shear mixer.
StabilityStable for at least 3 months at room temperature.
Ingredient Weight % Trade Name / Supplier
Phase A
1. Lauryl PEG/PPG-18/18 Methicone
2. C30-45 Alkyl Methicone
3. Dimethicone
4. Mineral Oil
5. Fragrance
3
4
5
17
0.4
Dow Corning® 5200 Formulation AidDow Corning® AMS-C30 Cosmetic WaxXIAMETER® PMX-200 Silicone Fluid 5CSMineral Oil / No Supplier SpecifiedWhite Grape Magic / Givaudan
Phase B
6. Distilled Water7. Sodium Chloride
8. Glycerin
66.61
3
Sodium Chloride / Fischer ScientificNo Tradename Specified / No Supplier Specified
Formulation InformationBeauty & Personal Care Applications
Attributes• Clear• Medium conditioning• Colored and permed hair
Products• XIAMETER® MEM-8177 Emulsion
Clear Shampoo: Colored and Permed Hair
Ingredient Weight % Trade Name / Supplier
Phase A
1. Water2. Sodium Laureth
Sulfate (30%)3. Ammonium Lauryl
Sulfate4. Cocamidopropyl Betaine
29.935
15
6
Empicol ESB-3 / Albright & WilsonStandapol A / Cognis CorporationAmonyl 380BA / Seppic S.A.
Phase B
5. Hydrolysed Wheat Pro-tein (and) Hydrolysed Wheat Starch
6. Panthenol
7. Benzophenone-4
8. Water
1
0.3
0.1
5
Cropeptide W / Croda Chemicals Europe, Ltd.
D-Panthenol USP / BASF CorporationUvinul MS 40 / BASF Corporation
Phase C
9. Amodimethicone (and) C12-14 Sec-Pareth-7 (and) C12-14 Sec-Pareth-5
10. DMDM Hydantoin11. Laureth-2
12. PEG-150 Pentaerythrityl Tetrastearate (and) PEG-6 Caprylic / Capric Glycerides (and) Water
13. Perfume (choice)
5
0.22.5
1.7
0.5
XIAMETER® MEM-8177 Emulsion
Glydant 2000 / LonzaDehydol LS 2 / Cognis CorporationCrothix Liquid / Croda, Inc.
Procedure1. Mix Phase A ingredients until homogeneous. 2. Mix Phase B ingredients together and add to
Phase A with mixing.3. Add Phase C ingredients one at a time in order
with mixing.
StabilityStable for 6 months at room temperature and 3 months at 40ºC.
Clear Shampoo: Colored and Permed Haircontinued
Formulation InformationBeauty & Personal Care Applications
Attributes• Clear• Enhanced dry combing• Enhanced wet combing• Smooth feel• Extra shine• Mild conditioning
Products• XIAMETER® OFX-5330 Fluid
Clear Shampoo: Extra Shine, Mild Conditioning
Ingredient Weight % Trade Name / Supplier
Phase A
1. Sodium Laureth Sulfate
2. Cocamidopropyl Betaine
3. Deionized Water
30
4
to 100
Empicol ESB 3 / Albright & WilsonAmonyl 380BA / Seppic S.A.
Phase B
4. Polyquaternium-10
5. Deionized Water
0.1
10
Ucare Polymer JR-400 / Amerchol Corporation
Phase C
6. PEG-150 Pentaerythrityl Tetrastearate
2 Crothix / Croda, Inc.
Phase D
7. Cocamide MIPA 2 Rewomid IPP 240 / Goldschmidt
Phase E
8. PEG/PPG-15/15 Dimethicone
2 XIAMETER® OFX-5330 Fluid
Phase F
9. Sodium Chloride
10. Citric Acid
q.s.
q.s.
Sodium Chloride / Fisher Scientific
Procedure1. Combine phase A ingredients in order.2. Heat phase A ingredients to 70-75°C.3. Heat ingredient 5 to 60°C, add ingredient 4 while gently mixing.4. Add phase B to phase A with gentle mixing.5. Add phase C to AB with gentle mixing.6. In an appropriate vessel, melt ingredient 7 in a hot water bath.7. Add blend ABC to phase D, with mixing.8. Add phase E.9. Mix until a homogeneous solution is obtained.10. Cool to room temperature.11. Adjust viscosity with sodium chloride, if necessary.12. Adjust pH to 5.5 with citric acid, if necessary.
VariationsXIAMETER® OFX-5330 Fluid can be replaced with XIAMETER® OFX-5324 Fluid.
StabilityStable for 6 months at room temperature and 3 months at 40ºC.
Clear Shampoo: Extra Shine, Mild Conditioningcontinued
Formulation InformationBeauty & Personal Care Applications
Attributes• Clear• Light conditioning• Wet combing• Normal to greasy hair
Products• XIAMETER® OFX-5330 Fluid
Clear Shampoo: Normal to Greasy Hair
Ingredient Weight % Trade Name / Supplier
Phase A
1. Water2. Sodium Laureth
Sulfate (30%)3. Cocamidopropyl
46.1535
6
Empicol ESB-3 / Albright & WilsonAmonyl 380BA / Seppic S.A.
Phase B
4. Hydroxypropyl Guar Hydroxypropyltrimonium Chloride
5. Hydrolysed Wheat Protein (and) Hyrdolysed Wheat Starch
6. Panthenol
7. Water
0.15
1
0.3
5
Jaguar C-162 / Rhodia, Inc.
Cropeptide W / Croda Chemicals Europe, Ltd.
D-Panthenol USP / BASF Corporation
Phase C
8. Green Tea Extract
9. PEG / PPG-15 / 15 Dimethicone
10. DMDM Hydantoin11. Laureth-2
12. PEG-150 Pentaerythrityl Tetrastearate (and) PEG-6 Caprylic / Capric Glycerides (and) Water
13. Perfume (choice)
0.5
1
0.22.5
1.7
0.5
Extrapon Green Tea GW / SymriseXIAMETER® OFX-5330 FluidGlydant 2000 / LonzaDehydol LS 2 / Cognis CorporationCrothix Liquid / Croda, Inc.
Procedure1. Mix Phase A ingredients until homogeneous. 2. Mix Phase B ingredients together and add to
Phase A with mixing.3. Add Phase C ingredients one at a time in order
with mixing.
StabilityStable for 6 months at room temperature and 3 months at 40ºC.
Clear Shampoo: Normal to Greasy Haircontinued
Formulation InformationBeauty & Personal Care Applications
Attributes• High conditioning• Colored and permed hair
Products• XIAMETER® MEM-0949 Emulsion
Rinse-Off Conditioner: Colored and Permed Hair
Ingredient Weight % Trade Name / Supplier
Phase A
1. Water2. Hydroxyethyl Cellulose
90.451 Natrosol Plus 330 CS /
Hercules Inc.
Phase B
3. Cetrimonium Chloride
4. Cetearyl Alcohol
5. Glyceryl Stearate (and) PEG-100 stearate
0.5
1.5
0.7
Arquad 16-29 / Akzo Nobel Chemicals, Inc.Crodacol CS 90 EP / Croda Chemicals Europe, Ltd.Simulsol 165 / Seppic S.A.
Phase C
6. Amodimethicone (and) Trideceth-12 (and) Cetrimonium Chloride
7. Hydrolysed Wheat Protein PG-Propyl Silanetriol
8. Panthenol
4
0.5
0.5
XIAMETER® MEM-0949 Emulsion
Crodasone W / CrodaChemicals Europe, Ltd.
D-Panthenol USP / BASF Corporation
Phase D
9. Benzophenone-3
10. Ethylhexyl Methoxycinnamate
0.1
0.2
Escalol 567 / ISP Sutton LaboratoriesParsol MCX / DSM Nutritional Products
Ingredients continued on next page.
Procedure1. Heat water for Phase A to about 75ºC. 2. Disperse ingredient 2 into water.3. Mix until well dispersed.4. Heat Phase B ingredients to 80ºC with gentle
mixing until completely melted.5. Add Phase B to Phase A with mixing.6. Cool to approximately 40ºC with stirring.7. Add Phase C ingredients mixing well after
each addition.8. Mix Phase D ingredients together.9. Add Phase D with mixing.10. Add Phase E ingredients one at a time to the
batch and homogenize.
StabilityStable for 6 months at room temperature and 3 months at 40ºC.
Ingredient Weight % Trade Name / Supplier
Phase E
1. DMDM Hydantoin2. Citric Acid 50% solution
3. Perfume
0.20.05
0.3
Glydant 2000 / LonzaNo Tradename Specified / No Supplier Specified.
Rinse-Off Conditioner: Colored and Permed Haircontinued
Formulation InformationBeauty & Personal Care Applications
Attributes• Enhanced body / volume• Enhanced dry combing• Enhanced wet combing
Products• XIAMETER® MEM-0949 Emulsion
Rinse-Off Conditioner: Enhanced Dry Combing, Enhanced Wet Combing
Procedure1. Mix ingredients of Phase A together.2. Heat to 60ºC to 70ºC.3. Add Phase B with mixing.4. Mix until melted.5. Cool to 40ºC.6. Add ingredient 5.7. Mix until uniform.8. Add ingredient 6.
Ingredient Weight % Trade Name / Supplier
Phase A
1. Deionized Water2. Hydroxyethylcellulose
90.541.5 Natrosol 250 HHR /
Hercules Inc.
Phase B
3. Cetearyl Alcohol
4. Glyceryl Stearate (and) PEG-100 Stearate
1
1
Lanette O / Cognis Corporation, Care ChemicalsArlacel 165 / Croda, Inc.
Phase C
5. Amodimethicone (and) Trideceth-12 (and) Cetrimonium Chloride
5.56 XIAMETER® MEM-0949 Emulsion
Phase D
6. DMDM 0.4 Glydant / Lonza
9. Mix until uniform.10. Compensate for the water loss due to heating.
StabilityStable for at least 6 months at room temperature.
Rinse-Off Conditioner: Enhanced Dry Combing, Enhanced Wet Combingcontinued
Formulation InformationBeauty & Personal Care Applications
Attributes• Dry combing• Wet combing• Light to medium conditioning• Opaque• Reduced fly-away• Smooth feel• Extra shine
Products• XIAMETER® OFX-5330 Fluid
Rinse Off Conditioner: Extra Shine
Procedure1. Heat ingredient 2 to 50ºC.2. Disperse ingredient 1 in 2, with strong agitation.3. Add Phase B to phase A with gentle mixing.4. Melt ingredient 4 in a hot water bath.5. Add Phase AB to Phase C.6. Mix until a homogeneous solution is obtained.7. Add ingredients of Phase D to mixture in the mentioned order.8. Cool to room temperature.9. Adjust pH to 3.5 with Citric Acid, if necessary.
StabilityStable for 6 months at room temperature and 3 months at 40ºC.
Ingredient Weight % Trade Name / Supplier
Phase A
1. Hydroxyethyl Cellulose
2. Deionized Water
1.5
50
Natrosol 250 HHR / Hercules Inc.
Phase B
3. Cetrimonium Chloride 0.3 Arquad 16-29 / Akzo Nobel
Phase C
4. Cetyl Alcohol 1
Phase D
5. PEG / PPG-27 / 27 Dimethicone
6. Deionised Water7. Preservative (choice)8. Citric Acid
2
to 1000.1q.s.
XIAMETER® OFX-5330 Fluid
Formulation InformationBeauty & Personal Care Applications
Attributes• Medium fixation• Jelly like texture
Products• XIAMETER® OFX-5324 Fluid
Sparkling Berry Styling GelClear Gel: Jelly Like Texture
Ingredient Weight % Trade Name / Supplier
Phase A
1. Water2. VP / Acrylates / Lauryl
Methacrylate Copolymer3. Acrylates / Beheneth-25
Methacrylate Copolymer4. EDTA5. Propylene Glycol (and)
Diazolidinyl Urea (and) Iodopropynyl Butylcarbamate
6. Red 40 (0.1% in water)
7. Perfume8. PEG-12 Dimethicone9. Sodium Hydroxide
(25% solution in water)
91.61.5
3
0.10.5
1
0.510.8
Styleze 2000 / ISP Sutton LaboratoriesAculyn 28 / Rohm & Haas
EDTA / Merck KGaALiquid Germail Plus / ISP Sutton Laboraties
FD&C Red 40 07700 / LCW SensientRaspbery Sorbet / CPL AromaXIAMETER® OFX-5324 Fluid
Phase B
10. Lactose (and) Cellulose (and) Hydroxypropyl Methylcellulose (and) Tocopheryl Acetate (and) Iron Oxides (and) Mica (and) Titanium Dioxide
11. Lactose (and) Cellulose (and) Hydroxypropyl Methylcellulose (and) Titanium Dioxide (and) Tocopherol Acetate (and) Iron Oxides
q.s.
q.s.
Lipobead Red-E / Lipo Technologies
Lipobead Yellow-EL / Lipo Technologies
The suggested percentages of Lipobead(TM) Red-E and Lipbead(TM) Yellow-EL in the formulation are 0.5%. Color and perfume can be adapted to create a specific effect.
Procedure1. Disperse ingredient 2 into water. 2. When homogeneous, add ingredient 3 and
mix well.3. When homogeneous, add ingredients 4 to 8
in order listed under slow mixing.4. Neutralize to pH 6 with NaOH.5. Finally add Phase B ingredients and mix with
moderate mixing speed.
StabilityStable for at least 6 months at room temperature and 40ºC.
Sparkling Berry Styling Gelcontinued
LIMITED WARRANTY INFORMATION - PLEASE READ CAREFULLY
The information contained herein is offered in good faith and is believed to be accurate. However, because conditions and methods of use of our products are beyond our control, this information should not be used in substitution for customer’s tests to ensure that our products are safe, effective and fully satisfactory for the intended end use. Suggestions of use shall not be taken as inducements to infringe any patent.
Dow Corning’s sole warranty is that our products will meet the sales specifications in effect at the time of shipment.
Your exclusive remedy for breach of such warranty is limited to refund of purchase price or replacement of any product shown to be other than as warranted.
DOW CORNING SPECIFICALLY DISCLAIMS ANY OTHER EXPRESS OR IMPLIED WARRANTY OF FITNESS FOR A PARTICULAR PURPOSE OR MERCHANTABILITY.
DOW CORNING DISCLAIMS LIABILITY FOR ANY INCIDENTAL OR CONSEQUENTIAL DAMAGES.
Dow Corning is a registered trademark of Dow Corning Corporation.XIAMETER is a registered trademark of Dow Corning Corporation.
©2012 Dow Corning Corporation. All rights reserved. Form No. 95-1133-01