FIX

ING

IN

TH

E W

AS

TE

FIX

ING

DO

WN

BA

SIN

+ S

EA

LIN

G E

DG

E01

01

04

04

02

02

05

05

03

03

06

06

Run a line of clear wet area silicon around the underside of the basin

10mm back from the edge

Run another line of clear wet area silicon 20mm back from the

waste hole

Press down into benchtop and remove excess silicon using wax

and grease remover and soft cloth

Run a bead of clear wet area silicon around the waste rim

Be generous with application. It is critical that silicon overflows

when waste is placed down

Slide waste into place

Run a bead of clear wet area silicon to fill the gap between the

basin and benchtop

Smooth silicon off to a neat finish and wipe clean with wax

and grease remover

Please ensure the edge is wateproof and 100%, so that water

can never get under the basin

Hand-tighten waste. Do not over tighten.

Carefully push silicon around gap between waste and sink

Clean excess with wax and grease remover and let dry for 24 hours

additional infoFOR MORE INFORMATION ON BASIN WARRANTY,

MAINTENANCE AND INSTALLATION, PLEASE VISIT:

WARRANTYnoodco.com.au/sink-warranty

MAINTENANCEnoodco.com.au/sinks-info/#maintenance

INSTALLATIONnoodco.com.au/sinks-info/#install