Post on 04-Mar-2021
0.28 hrs
2 pcs
f
0.20 mm
k
0.40 mm
h
18
2.00 g
d
PrusaMK3/S
Print Files (.gcode) DOWNLOAD ALL FILES
Summary
First layer 60x60 mm square with 0.2 mm height
100x100 mm square https://www.prusaprinters.org/prints/10876-first-layer-test-100x100-mm-square
3D Printers > Test models
layer test first
First gcode: PLA Second gcode: PETG
Boogie
First layer test60x60 mm square /Z calibration
VIEW IN BROWSER
updated 26. 10. 2020 | published 9. 11. 2019
27.0 KB
0.14 hrs f 0.20 mm k 0.40 mm h PLA 0.90 g d PrusaMK3/S
updated 10. 11. 2019
44.4 KB
0.14 hrs f 0.20 mm k 0.40 mm h PET 0.90 g d PrusaMK3/S
updated 26. 10. 2020
Model Files (.stl, .3mf, .obj, .amf) DOWNLOAD ALL FILES
9.3 KBupdated 9. 11. 2019
License
This work is licensed under a Creative Commons (4.0 International License)
Attribution-NonCommercial
✖ | Sharing without ATTRIBUTION ✔ | Remix Culture allowed ✖ | Commercial Use ✖ | Free Cultural Works ✖ | Meets Open Definition
firstlayer60x60mm_02mm_pla_mk3s_8m.gcode
firstlayer60x60mm_02mm_petg_mk3s_8m.gcode
firstlayer60x60mm.stl