Post on 26-Jan-2022
TORQ ALUMINUM EXTRUSION
© 2020 Q-Tran Inc. All rights reserved | 155 Hill St. Milford, CT 06460 | 203-367-8777 | sales@q-tran.com | www.q-tran.com Specification subject to change. Rev-10-02-20
Dimensions
Finish
Mounting
Part Number Builder
1” incrementsfrom 1” - 98.43”
Tolerance +0.0"/-0.5"
Product Mounting Finished Fixture Length (in)Finish Lens
STBKBZ
SSTMG
TORQTORQ-WO
CL/60CL/70
FRPRDF
ENC/CL ENC/TL12DEG40DEG
S1S2S3S4
P1P2P3P4
NI
Type
• Field modifications must comply with Q-Tran’s installation methods otherwise warranty is null & void
• UL Listed when assembled with STRIP LEDs at Q-Tran
• NRTL Listed for install in Storage Areas with Clothing, NEC Field 410.2 and 410.16 when assembled as a fixture, at Q-Tran facility (Not applicable for encapsulation)
• WhiteOptics technology
• Surface mount
• Two different cut off angles: CL/60 and CL/70
• Two encapsulation options: clear and translucent
• Metallic end caps with white interior
Single(Input Only)
Pass through(Input/Output)
Not installed(Strip not installed in factory)
Stainless steel Magnet clip
Black anodizedMatte finishBlack end caps
BLACKSATIN
Bronze anodizedMatte finishBronze end caps
BRONZE
Satin anodizedMatte finishMetallic end caps
.44"
.52"
.70"
.60"
.81"
.66"
.20"
.81"
.86"
Profile with flat lens stainless steel
mounting clip and mounting tray
Profile with flat lens magnet mounting clip
Profile with flat lens
.70"
.72"
.60".44"
.52"
.81"
.72"
.60"
.78"
.81"
.98"
.20"
Profile with optical lens stainless steel mounting clip and mounting tray
Profile with optical lens magnet mounting clip
Profile with optical lens
1.25"
.20"
.20"
.81"
COMPLIANT
.20"
.81"1.2
5"
2 clips provided for 4' or less; 4 clips provided for greater than 4'
1 If selecting WhiteOptics option, select TORQ-WO for Product
TORQ ALUMINUM EXTRUSION
© 2020 Q-Tran Inc. All rights reserved | 155 Hill St. Milford, CT 06460 | 203-367-8777 | sales@q-tran.com | www.q-tran.com Specification subject to change. Rev-10-02-20
Compatible Strips
Type
Lens with LED visibility
Length (in) Add to nominal LED length for fixture length
Cut Off
S1
CL
P1S2
FR
P2S3
PR ENC/CL CL/60 12DEG
P3S4
DF ENC/TL 12DEG & 40DEG CL/70 40DEG
P4
End feed
Clear
End feedBottom feed
Frosted
Bottom feedSide feed
PolarEncapsulated
in Clear
Side feedSide feed
DiffusedEncapsulated in Translucent Optical
Side feed
.08" .08".25"
.08".25" .08".25"
Endcap#1Endcap#2
S1 .08" + .08" + .25" =.41"
P1 .08" + .08" + 2x(.25") =.66"
Space to solder wire
S1 .08" + .08" + .25" =.41"
P1 .08” + .08” + 2(.25”) =.66”
SINGLE (Input only) PASS THROUGH (Input/Output)
InIn
In
In In
Out
In
Out
In
OutIn
Out
End Caps
70º60º
Flat end caps
No feed No feedFeed, no tray Feed, no trayFeed with tray Feed with tray
Optical end caps
.33”
.72”
.70”.33”
.61”
.70”.33”
.72”
.70”.33”
.61”
.70”.33”
.72”
.70”.33”
.61”
.70”
12º 40º
DRY and DMP rated LEDS only
SW 1.5-5.0 SW 6.0-7.5 SW-HE SW-HE+ DW DW-HE SC RGB RGBW
DRY ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔
DMP ✔ ✔ ✔ ✔ ✔ ✔
ENC ✔ ✔ ✔ ✔ ✔ ✔
WET ✔ ✔
STATIC WHITE (SW)
STATIC WHITE HE
STATIC WHITE HE+
DYNAMIC WHITE (DW)
DYNAMIC WHITE HE
STATIC COLOR (SC) RGB RGBW
1.53.04.05.0
6.07.5
1.53.06.09.0
3.06.0 6.0
3.05.08.0
5.0 6.0 6.0
DRY
DMP
ENC
WET
Not compatible with 9.0
Not compatible with 9.0
Not compatible with 8.0
Not compatible with 8.0
TORQ ALUMINUM EXTRUSION
© 2020 Q-Tran Inc. All rights reserved | 155 Hill St. Milford, CT 06460 | 203-367-8777 | sales@q-tran.com | www.q-tran.com Specification subject to change. Rev-10-02-20
TORQ LM/FT TORQ-WO LM/FT TORQ-WO Lumen Increase
Satin Black/Bronze Satin Black/Bronze Satin Black/Bronze
Clear 346 277 365 350 5% 26%
Frosted 298 235 326 315 9% 34%
Polar 281 208 312 291 11% 40%
Diffused 245 168 270 256 10% 52%
WhiteOptics Photometrics Tested with SW24/5.0-DRY-30[Calculated L70(6k) - 70000 hours]
© 2020 Q-Tran Inc. All rights reserved | 155 Hill St. Milford, CT 06460 | 203-367-8777 | sales@q-tran.com | www.q-tran.com Specification subject to change. Rev-10-02-20
TORQ ALUMINUM EXTRUSION
Mounting Type - Surface
Mounting - Hardware
Finish
Black anodizedMatte finishBlack end caps
BLACKSATIN
Bronze anodizedMatte finishBronze end caps
BRONZE
Satin anodizedMatte finishMetallic end caps
VHB-STD & VHB-CON (see Accessory cutsheet)
• Double sided strong adhesive tape
• VHB-STD is for Indoor use
• VHB-CON bonds to concrete
.01"
.38"
.05"
.50"
VHB-CON
VHB-STD
• Strong adhesive• Not submersible, for dry
and wet locations only
832
832 (see Accessory cutsheet)
Stainless Steel Clip(SST-01)
• Stainless Steel• Indoor/Outdoor• #4 x 5/8" Flat Head SS
(1 per clip included)
2 clips provided for 4' or less;4 clips provided for greater than 4'
.20"
.81"1.2
5"
Magnet Clip(MG-01)
• Stainless Steel• Neodymium magnet• Indoor
1.25"
.20"
.20"
.81"
1 Magnet clip per foot
Magnet Mount Accessory
(MMA)
12"
.75".23"
2.5"
.64"
Sold separately
• Steel Bracket• Indoor• #6 x 5/8" Flat Head SS
(2 per bracket included)
.68”
.75”
.23”.19”
70º60º 12º 40º
DRY and DMP rated LEDS only
• Adjustable mounting bracket
• Q-Angle: Indoor/Outdoor• Pivot Bracket: Indoor
Q-ANGLE & PIVOT BRACKET
(see Accessory cutsheet)
Q-ANGLE PIVOT
LensCL Clear
ENC/CL Encapsulated in Clear ENC/TL Encapsulated in Translucent
FR Frosted PR Polar DF Diffused
Cut Off
Optical 12° Optical 40°Clear 70°Clear 60°
© 2020 Q-Tran Inc. All rights reserved | 155 Hill St. Milford, CT 06460 | 203-367-8777 | sales@q-tran.com | www.q-tran.com Specification subject to change. Rev-10-02-20
TORQ ALUMINUM EXTRUSION
TYPE To order a bare extrusion without a strip installed in Q-Tran factory, choose NI (Not Installed) for your Type option
Light Orientation
SYMMETRICAL
STATIC WHITE AND STATIC COLOR ONLYConnectors/Wire
DRY BARREL 6"BARE WIRE 24"
BW
WET BARREL 6"
DW & RGBSW & SC INPUT INPUTOUTPUT OUTPUT
BRL BRL
BW 24”
BRL 6”
BW 24”
BRL 6”
BW 24”BW 24”
BRL 6” BRL 6”
BW 24” BRL 6”
BW 24”BRL 6”
BRL 6” BRL 6”
BRL 6”
BW 24”
BW 24”
BW 24”
BW 24”BRL 6”
S3 - Input only
S4 - Input only
P3 - Input/Output
P4 - Input/Output
S1 - Input only
S2 - Input only
P1 - Input/Output
P2 - Input/Output
BW 36”
CON 6”
CON 6”
BW 36”
BW 36”
BW 36”
BW 36”
CON 6”CON 6”
CON 6”
BW 24”
BRL 6”
BW 24” BW 24”
BW 24”
BRL 6” BRL 6”
BRL 6”
BW 24” BRL 6”
© 2020 Q-Tran Inc. All rights reserved | 155 Hill St. Milford, CT 06460 | 203-367-8777 | sales@q-tran.com | www.q-tran.com Specification subject to change. Rev-10-02-20
INSTALLATION EXTRUSION - TORQ
Mounting NOTE: 2 clips provided for 4’ or less;4 clips provided for greater than 4’
NOTES: • Field modifications must comply with Q-Tran’s installation methods otherwise warranty is null and void
MG Millwork Info HARDWARE
#6x5/8" Flat head screw(Included)
#4x5/8" Flat head screw(Included)
12"
.75".23"
2.5"
.64"
.26"
.625"
.21"
.625"
.20"
.81"1.2
5"
1.25"
.20"
.20"
.81"
Stainless Steel Clip(SST-01)
Magnet Clip(MG-01)
Magnet Mount Accessory(MMA)
(Sold separately)
NOTE: TORQ is recessable with all compatible LED strips except SW-HE24/9.0.NOTE: Height of millwork will be dependent on overall height with the MG clip in addition to the thickness of the magnet mount accessory
.85”
.04”
3.1. 2.
3.1. 2.
3.2.
20MINS
1.
832
3.2.1.
NOTE: Apply silicone in a well ventilated area. 832 Silicone is sold with caulking gun. Do not use in any submersible applications.
NOTE: The magnet clips should be offset to the flat heads used to secure the bracket, to maximize magnetic connection.
Using the #6 Flat head screws, mount two screws into the 12” magnet bracket through the slotted holes at each end
Attach the magnet clips onto the extrusion Connect the assembled extrusion and its magnet clips to the magnet bracket, the install should match the section view
VHB Mounting
832 Silicone Mounting
Magnet Mounting
Screw Mounting
Section View
#4x5/8" Flat head screw
#6x5/8" Flat head screw
.21"
.625"
.26"
.625"
© 2020 Q-Tran Inc. All rights reserved | 155 Hill St. Milford, CT 06460 | 203-367-8777 | sales@q-tran.com | www.q-tran.com Specification subject to change. Rev-09-29-20
COMPATIBILITY EXTRUSION AND STRIP
SW-IA
5.0W/ft
DRY DMP WET ENC DRY DRY DMP WET ENC DRY DMP WET ENC DRY DMP WET ENC DRY DMP WET ENC
SLIM ⯁ ⯁ ◇◇ ◇◇
WIDE ⯁ ⯁
ROND ⯁
VEGA ⯁
TORQ ⯁ ⯁ ⯁
TRE3 ⯁ ⯁
ARKA ⯁ ⯁
TELA ⯁ ⯁
VEVE ⯁ ⯁
FLUR ⯁ ⯁ ⯁
LATO ⯁ ⯁ ⯁
LALO ⯁ ⯁ ⯁
TALO ⯁ ⯁ ⯁
MDIN ⬤ ⯁
= Compatible ⯁ = NOT Compatible with 6.0 & 7.5 strips ⬤ = NOT Compatible with 7.5 strip
= NOT Compatible ◇ = Wet rated but with no lens
6.0 W/ft6.0 W/ft
RGBWRGB
EXTRUSIONS
STATIC COLOR
5.0 W/ft
DYNAMIC WHITE
6.0 W/ft1.5 - 7.5 W/ft
STATIC WHITE
DRY DMP WET ENC DRY DMP WET ENC DRY DMP WET ENC DRY DMP WET ENC DRY DMP WET ENC DRY DMP WET ENC DRY DMP WET ENC
SLIM ✕✕ ✕✕ ✕✕ ✕✕ ✕✕ ✕✕ ✕✕ ✕✕ ✕✕ ✕✕ ✕✕ ✕✕ ✕✕ ✕✕ ✕✕ ✕✕ ✕✕ ✕✕ ✕✕ ✕✕ ✕✕ ✕✕ ✕✕ ✕✕
WIDE ✕✕ ✕✕ ✕✕ ✕✕ ✕✕ ✕✕ ✕✕ ✕✕ ✕✕ ✕✕ ✕✕ ✕✕
ROND ✕✕ ✕✕ ✕✕ ✕✕ ✕✕ ✕✕ ✕✕ ✕✕ ✕✕ ✕✕ ✕✕ ✕✕ ✕✕ ✕✕ ✕✕ ✕✕ ✕✕ ✕✕ ✕✕ ✕✕ ✕✕ ✕✕ ✕✕ ✕✕
VEGA ✕✕ ✕✕ ✕✕ ✕✕ ✕✕ ✕✕ ✕✕ ✕✕ ✕✕ ✕✕ ✕✕ ✕✕ ✕✕ ✕✕ ✕✕ ✕✕ ✕✕ ✕✕ ✕✕ ✕✕ ✕✕ ✕✕ ✕✕ ✕✕
TORQ ✕✕ ✕✕ ✕✕ ✕✕ ✕✕ ✕✕ ✕✕ ✕✕ ✕✕ ✕✕ ✕✕
TRE3 ✕✕ ✕✕ ✕✕ ✕✕ ✕✕ ✕✕ ✕✕ ✕✕ ✕✕ ✕✕ ✕✕ ✕✕ ✕✕ ✕✕ ✕✕ ✕✕ ✕✕ ✕✕
ARKA ✕✕ ✕✕ ✕✕ ✕✕ ✕✕ ✕✕ ✕✕ ✕✕ ✕✕ ✕✕ ✕✕ ✕✕ ✕✕ ✕✕ ✕✕ ✕✕
TELA ✕✕ ✕✕ ✕✕ ✕✕ ✕✕ ✕✕ ✕✕ ✕✕ ✕✕ ✕✕ ✕✕ ✕✕ ✕✕ ✕✕ ✕✕ ✕✕
VEVE ✕✕ ✕✕ ✕✕ ✕✕ ✕✕ ✕✕ ✕✕ ✕✕ ✕✕ ✕✕ ✕✕ ✕✕ ✕✕ ✕✕ ✕✕ ✕✕ ✕✕ ✕✕
FLUR ✕✕ ✕✕ ✕✕ ✕✕ ✕✕ ✕✕ ✕✕ ✕✕ ✕✕ ✕✕ ✕✕
LATO ✕✕ ✕✕ ✕✕ ✕✕ ✕✕ ✕✕ ✕✕ ✕✕ ✕✕ ✕✕ ✕✕ ✕✕ ✕✕
LALO ✕✕ ✕✕ ✕✕ ✕✕ ✕✕ ✕✕ ✕✕ ✕✕ ✕✕ ✕✕ ✕✕
TALO ✕✕ ✕✕ ✕✕ ✕✕ ✕✕ ✕✕ ✕✕ ✕✕ ✕✕ ✕✕ ✕✕
MDIN ✕✕ ✕✕ ✕✕ ✕✕ ✕✕ ✕✕ ✕✕ ✕✕ ✕✕ ✕✕ ✕✕ ✕✕ ✕✕ ✕✕ ✕✕ ✕✕ ✕✕ ✕✕
3.0 W/ft
STATIC WHITE - HE
5.0 W/ft 8.0 W/ft
DYNAMIC WHITE - HE
EXTRUSIONS
✔= Compatible
6.0 W/ft 9.0 W/ft1.5 W/ft 3.0 W/ft
✕✕ = NOT Compatible
DRY DMP WET ENC DRY DMP WET ENC
SLIM ✕✕ ✕✕ ✕✕ ✕✕ ✕✕ ✕✕
WIDE ✕✕ ✕✕ ✕✕ ✕✕
ROND ✕✕ ✕✕ ✕✕ ✕✕ ✕✕ ✕✕ VEGA ✕✕ ✕✕ ✕✕ ✕✕ ✕✕ ✕✕
TORQ ✕✕ ✕✕ ✕✕ ✕✕ ✕✕ ✕✕
TRE3 ✕✕ ✕✕ ✕✕ ✕✕ ✕✕ ✕✕
ARKA ✕✕ ✕✕ ✕✕ ✕✕
TELA ✕✕ ✕✕ ✕✕ ✕✕
VEVE ✕✕ ✕✕ ✕✕ ✕✕ ✕✕ ✕✕
FLUR ✕✕ ✕✕ ✕✕ ✕✕ ✕✕ ✕✕
LATO ✕✕ ✕✕ ✕✕ ✕✕ ✕✕ ✕✕
LALO ✕✕ ✕✕ ✕✕ ✕✕
TALO ✕✕ ✕✕ ✕✕ ✕✕
MDIN ✕✕ ✕✕ ✕✕ ✕✕ ✕✕ ✕✕
EXTRUSIONS
✔= Compatible
STATIC WHITE - HE+ STATIC WHITE - HE+
3.0 W/ft 6.0 W/ft
✕✕ = NOT Compatible