Post on 03-Feb-2022
SPRING CITY ELECTRICAL MFG. CO., INHall & Main Streets, P. O. Box 19Spring City, PA 19475-0019Phone: 610-948-4000 Fax: 610-948-5577Website: www.springci ty.com
Page: BP 1
Bishops Crook Bi-Metal Post21” One Piece Slip Base
S p e c i f i c a t i o n
Description
The Bishop Crook Bi-Metal post consists of a cast bused in combination with a fabricated column. The facated column mounts to the foundation at grade and ries the structural load. The cast base serves both a drative and protective function.
Post Material
The base is a heavy wall metal casting available in giron per ASTM A48, ductile Iron per ASTM A536 aluminum per ASTM B26-95 Alloy SR356. The fabried column is tapered at 0.14” per foot and is availablvariable heights. The column can be supplied eismooth or with vertical flutes in patterns of 8 sharp, 12and 16 sharp. Steel columns are available in 11 angauge as standard with other wall thicknesses availupon request. Aluminum column wall thickness rafrom 0.125” to 0.25” with other thicknesses availupon request or as determined by application. For mordepth information on materials, please refer to Materiathe Accessories Section.
Dimensions
Available post heights range from 10’ to 24’ in incremas small as 1”. The cast base has a round cross secwith a base diameter of 21”. The fabricated shaft hbase plate with four slotted openings for anchor bolts offers a standard bolt circle of 12”. Other bolt circlesavailable upon request. Tenon size is variable and baupon application.
Installation
A single access door is located in the base to provaccess to the anchor bolts. The door in the base coincwith the hand hole opening in the column for wiaccess. Opposite the hand hole opening inside the coluare a 1/4-20 nut provisions for a ground lug, by othAnchor bolts supplied are per ASTM A36M G55 andfully hot dip galvanized to ASTM A153.
Catalog No.: BCC-21
10’-0”
17’-0”
24’-0”
Ordering GuideCast Base Example: ISBBCC-21-CB (Cast Iron Slip Base Bishops Crook-21”Dia. Base-Finish Classic Black)
Material Base: Base Configuration:_____ I Cast Iron_____ D Cast Ductile Iron _____SB Slip Base BBC-21-(coatings see below)_____ A Cast Aluminum
Column Example: SSH2F-G11-6.75-24-TN2.88/3.00-130/2NW-CB (SteelShaft 12 Flute-11 Gauge-6.75 Shaft Dia.-24’ Ht.-Tenon 2 7/8” Dia. x 3” Ht.-1”x 30” Anchor Bolts / 2 Nuts & Washers per anchor bolt-Finish Classic Black)
Material Column:_____ SSH Steel Shaft _____ ASH Aluminum Shaft
Column Configuration:_____SS Smooth Straight _____ST Smooth Tapered_____8S 8 Sharp Flute _____E3 3.5” Fluted Aluminum_____2F 12 Flat Flute _____E5 5.0” Fluted Aluminum _____6S 16 Sharp Flute _____H5 5.0” Fluted Heavy Wall Aluminum_____OC Octagonal _____E8 8.0” Fluted Aluminum
Column Thickness-Shaft Diameter at Grade-Height (max ht. 24’-0”):_____G11 11 Gauge steel-6.75-____- _____SC4 Schedule 40-X.X-____ -_____G17 7 Gauge steel- 6.75-____- _____SC8 Schedule 80-X.X-____-_____G24 3 Gauge steel- 6.75-____-_____A12 .125”thk alum.-6.75-____- _____A18 .188”thk alum.-6.75-____-_____A20 .200”thk alum.-6.75-____- _____A25 .250”thk alum.-6.75-____-
Post Top Tenon:_____ TN2.88/2.50- 2 7/8” Dia.. x 2 1/2” Ht._____ TN2.88/3.00- 2 7/8” Dia.. x 3” Ht._____ TN3.50/3.00- 3 1/2” Dia.. x 3” H_____ TNXX/XX- Other, please specify: ________” Dia.. x ________” Ht.
Accessories: (See Accessorie Section)
Anchor Bolts:_____ 323/ 3/4” x 24” _____ 124/ 1” x 24” _____ 136/ 1” x 36”_____ 330/ 3/4” x 30” _____ 130/ 1” x 30” _____ 140/ 1” x 40”_____ XXX/ Other _____ 999/ Not required_____ 1NW- 1Nut & Washer / Bolt _____ 2NW- 2 Nuts & Washers / Bolt
Coatings (Paint Finish - For detailed information, see Finish in the Specification Section):_____ PO Prime Paint _____ CB Finish Classic Black_____ BG Finish Bottle Green _____ DB Finish Dark Bronze_____ LB Finish Long Beach Blue _____ GI Finish Grey Iron_____ VG Finish Verde Green _____ CW Finish Custom Wet_____ CU Finish Custom Powder Coat _____ XX Other_____ GV Galvanized _____ UF Unfinished
Bishops Crook - Bi-Metal cast base and fab-ricated column. One piece all cast materialversion of this style available, see the LightingPost - Cast Section
SPRING CITY ELECTRICAL MFG. CO., INC.Hall & Main Streets, P. O. Box 19Spring City, PA 19475-0019Phone: 610-948-4000 Fax: 610-948-5577Website: www.springci ty.com
Page: BP 2
Max. ht.24’-0”
6” Dia
21” Dia.
AccessDoor
6”, 7” or 9”Dia. as deter-mined by col-umn diam.
21” Diameter
11 3/4” (4) Slotted openings to accommodateanchor bolts
6 3/4” O.D. of Steel Shaft
12” Diameter Bolt Circle
CL of Hand Hole and Access Door
5’-5 1/4”
Catalog No.: IVY-21
Ivy Bi-Metal Post21” One Piece Slip Base
S p e c i f i c a t i o n
Description
The Ivy Bi-Metal post consists of a cast base used in cbination with a fabricated column. The fabricated columounts to the foundation at grade and carries the strucal load. The cast base serves both a decorative and tective function.
Post Material
The base is a heavy wall metal casting available in giron per ASTM A48, ductile Iron per ASTM A536 aluminum per ASTM B26-95 Alloy SR356. The fabried column is tapered at 0.14” per foot and is availablvariable heights. The column can be supplied eismooth or with vertical flutes in patterns of 8 sharp, 12and 16 sharp. Steel columns are available in 11 angauge as standard with other wall thicknesses availupon request. Aluminum column wall thickness rafrom 0.125” to 0.25” with other thicknesses availupon request or as determined by application. For mordepth information on materials, please refer to Materiathe Accessories Section.
Dimensions
Available post heights range from 10’ to 24’ in incremas small as 1”. The cast base has a round cross secwith a base diameter of 21”. The fabricated shaft hbase plate with four slotted openings for anchor bolts offers a standard bolt circle of 12”. Other bolt circlesavailable upon request. Tenon size is variable and baupon application.
Installation
A single access door is located in the base to provaccess to the anchor bolts. The door in the base coincwith the hand hole opening in the column for wiaccess. Opposite the hand hole opening inside the coluare a 1/4-20 nut provisions for a ground lug, by othAnchor bolts supplied are per ASTM A36M G55 andfully hot dip galvanized to ASTM A153.
SPRING CITY ELECTRICAL MFG. CO., INHall & Main Streets, P. O. Box 19Spring City, PA 19475-0019Phone: 610-948-4000 Fax: 610-948-5577Website: www.springci ty.com
Page: BP 3
24’-0”
17’-0”
10’-0”
Ordering GuideCast Base Example: ISBIVY-21-CB(Cast Iron Slip Base Ivy-21” Dia. Base-Finish Classic Black)
Material Base: Base Configuration:_____ I Cast Iron_____ D Cast Ductile Iron _____SB Slip Base Ivy-21-(coatings see below)_____ A Cast Aluminum
Column Example: SSH2F-G11-7.50-24-TN2.88/3.00-130/2NW-CB (SteelShaft 12 Flute-11 Gauge-7.50 Shaft Dia..-24’ Ht.-Tenon 2 7/8” Dia. x 3” Ht.-1”x 30” Anchor Bolts / 2 Nuts & Washers per anchor bolt-Finish Classic Black)
Material Column:_____ SSH Steel Shaft _____ ASH Aluminum Shaft
Column Configuration:_____SS Smooth Straight _____ST Smooth Tapered_____8S 8 Sharp Flute _____E3 3.5” Fluted Aluminum_____2F 12 Flat Flute _____E5 5.0” Fluted Aluminum _____6S 16 Sharp Flute _____H5 5.0” Fluted Heavy Wall Aluminum_____OC Octagonal _____E8 8.0” Fluted Aluminum
Column Thickness-Shaft Diameter at Grade-Height (max ht. 24’-0”):_____G11 11 Gauge-7.5-____- _____SC4 Schedule 40-7.5-____ -_____G17 7 Gauge- 7.5-____- _____SC8 Schedule 80-7.5-____-_____G24 3 Gauge- 7.5-____-_____A12 .125”thk alum.-6.75-____- _____A18 .188”thk alum.-6.75-____-_____A20 .200”thk alum.-6.75-____- _____A25 .250”thk alum.-6.75-____-
Post Top Tenon:_____ TN2.88/2.50- 2 7/8” Dia.. x 2 1/2” Ht._____ TN2.88/3.00- 2 7/8” Dia.. x 3” Ht._____ TN3.50/3.00- 3 1/2” Dia.. x 3” H_____ TNXX/XX- Other, please specify: ________” Dia.. x ________” Ht.
Accessories: (See Accessorie Section)
Anchor Bolts:_____ 323/ 3/4” x 24” _____ 124/ 1” x 24” _____ 136/ 1” x 36”_____ 330/ 3/4” x 30” _____ 130/ 1” x 30” _____ 140/ 1” x 40”_____ XXX/ Other _____ 999/ Not required_____ 1NW- 1Nut & Washer / Bolt _____ 2NW- 2 Nuts & Washers / Bolt
Coatings (Paint Finish - For detailed information, see Finish in the Specification Section):_____ PO Prime Paint _____ CB Finish Classic Black_____ BG Finish Bottle Green _____ DB Finish Dark Bronze_____ LB Finish Long Beach Blue _____ GI Finish Grey Iron_____ VG Finish Verde Green _____ CW Finish Custom Wet_____ CU Finish Custom Powder Coat _____ XX Other_____ GV Galvanized _____ UF Unfinished
Ivy - Bi-Metal cast base and fabricated col-umn. One piece all cast material version ofthis style available, see the Lighting Post - CastSection
SPRING CITY ELECTRICAL MFG. CO., INC.Hall & Main Streets, P. O. Box 19Spring City, PA 19475-0019Phone: 610-948-4000 Fax: 610-948-5577Website: www.springci ty.com
Page: BP 4
AccessDoor
21” Dia.
7” Dia.
6”, 7” or 9”Dia. as deter-mined by col-umn diam.
Max. ht.24’-0”
21” Diameter
11 3/4”
(4) Slotted openings to accommodateanchor bolts
7 1/2” O. D. of Steel Shaft
12” Diameter Bolt Circle
CL of Hand Hole and Access Door
3’-10 1/2”
Catalog No.: OKL-24
SPRING CITY ELECTRICAL MFG. CO., INHall & Main Streets, P. O. Box 19Spring City, PA 19475-0019Phone: 610-948-4000 Fax: 610-948-5577Website: www.springci ty.com
Page: BP 5
S p e c i f i c a t i o n
Description
The Oakland Bi-Metal post consists of a cast base usecombination with a fabricated column. The fabriccolumn mounts to the foundation at grade and carriesstructural load. The cast base serves both a decorativeprotective function.
Post Material
The base is a heavy wall metal casting available in giron per ASTM A48, ductile Iron per ASTM A536 aluminum per ASTM B26-95 Alloy SR356. The fabried column is tapered at 0.14” per foot and is availablvariable heights. The column can be supplied eismooth or with vertical flutes in patterns of 8 sharp, 12and 16 sharp. Steel columns are available in 11 angauge as standard with other wall thicknesses availupon request. Aluminum column wall thickness rafrom 0.125” to 0.25” with other thicknesses availupon request or as determined by application. For mordepth information on materials, please refer to Materiathe Accessories Section.
Dimensions
Available post heights range from 10’ to 22’ in incremas small as 1”. The cast base has an octagonal cross tion with a base dimension of 24”. The fabricated shas a base plate with four slotted openings for anchor band offers a standard bolt circle of 12”. Other bolt cirare available upon request. Tenon size is variable based upon application.
Installation
A single access door is located in the base to provaccess to the anchor bolts. The door in the base coincwith the hand hole opening in the column for wiaccess. Opposite the hand hole opening inside the coluare a 1/4-20 nut provisions for a ground lug, by othAnchor bolts supplied are per ASTM A36M G55 andfully hot dip galvanized to ASTM A153.
22’-0”
16’-0”
10’-0”
Oakland Bi-Metal Post24” One Piece Slip Base
Ordering GuideCast Base Example: ISBOKL-24-CB (Cast Iron Slip Base Oakland-24” Oct.Base-Finish Classic Black)
Material Base: Base Configuration:_____ I Cast Iron_____ D Cast Ductile Iron _____SB Slip Base OKL-24-(coatings see below)_____ A Cast Aluminum
Column Example: SSH6S-G11-6.75-22-TN2.88/3.00-130/2NW-CB (SteelShaft 16 Flute-11 Gauge-6.75 Shaft Dia.-22’ Ht.-Tenon 2 7/8” Dia. x 3” Ht.-1”x 30” Anchor Bolts / 2 Nuts & Washers per anchor bolt-Finish Classic Black)
Material Column:_____ SSH Steel Shaft _____ ASH Aluminum Shaft
Column Configuration:_____SS Smooth Straight _____ST Smooth Tapered_____8S 8 Sharp Flute _____E3 3.5” Fluted Aluminum_____2F 12 Flat Flute _____E5 5.0” Fluted Aluminum _____6S 16 Sharp Flute _____H5 5.0” Fluted Heavy Wall Aluminum_____OC Octagonal _____E8 8.0” Fluted Aluminum
Column Thickness-Shaft Diameter at Grade-Height (max ht. 22’-0”):_____G11 11 Gauge-6.75-____- _____SC4 Schedule 40-X.X-____ -_____G17 7 Gauge- 6.75-____- _____SC8 Schedule 80-X.X-____-_____G24 3 Gauge- 6.75-____-_____A12 .125”thk alum.-6.75-____- _____A18 .188”thk alum.-6.75-____-_____A20 .200”thk alum.-6.75-____- _____A25 .250”thk alum.-6.75-____-
Post Top Tenon:_____ TN2.88/2.50- 2 7/8” Dia.. x 2 1/2” Ht._____ TN2.88/3.00- 2 7/8” Dia.. x 3” Ht._____ TN3.50/3.00- 3 1/2” Dia.. x 3” H_____ TNXX/XX- Other, please specify: ________” Dia.. x ________” Ht.
Accessories: (See Accessorie Section)
Anchor Bolts:_____ 323/ 3/4” x 24” _____ 124/ 1” x 24” _____ 136/ 1” x 36”_____ 330/ 3/4” x 30” _____ 130/ 1” x 30” _____ 140/ 1” x 40”_____ XXX/ Other _____ 999/ Not required_____ 1NW- 1Nut & Washer / Bolt _____ 2NW- 2 Nuts & Washers / Bolt
Coatings (Paint Finish - For detailed information, see Finish in the Specification Section):_____ PO Prime Paint _____ CB Finish Classic Black_____ BG Finish Bottle Green _____ DB Finish Dark Bronze_____ LB Finish Long Beach Blue _____ GI Finish Grey Iron_____ VG Finish Verde Green _____ CW Finish Custom Wet_____ CU Finish Custom Powder Coat _____ XX Other_____ GV Galvanized _____ UF Unfinished
Oakland - Bi-Metal cast base and fabricatedcolumn. One piece all cast material version ofthis style available, see the Lighting Post - CastSection
SPRING CITY ELECTRICAL MFG. CO., INC.Hall & Main Streets, P. O. Box 19Spring City, PA 19475-0019Phone: 610-948-4000 Fax: 610-948-5577Website: www.springci ty.com
Page: BP 6
6”, 7” or 9”Dia. as deter-mined by col-umn diam.
24” Octagonal
11 3/4”
(4) Slotted openings to accommodateanchor bolts
6 3/4” O. D. of Steel Shaft
12” Diameter Bolt Circle
CL of Hand Hole and Access Door
5 3/4” Dia.
AccessDoor
24” Oct.
Max. ht.22’-0”
4’-5”
SPRING CITY ELECTRICAL MFG. CO., INHall & Main Streets, P. O. Box 19Spring City, PA 19475-0019Phone: 610-948-4000 Fax: 610-948-5577Website: www.springci ty.com
Page: BP 7
Washington Bi-Metal Post17” Two Piece Wrap Base
S p e c i f i c a t i o n
Description
The Washington Bi-Metal post consists of a cast base uin combination with a fabricated column. The fabriccolumn mounts to the foundation at grade and carriesstructural load. The cast base serves both a decorativeprotective function.
Post Material
The base is a heavy wall metal casting available in giron per ASTM A48, ductile Iron per ASTM A536 aluminum per ASTM B26-95 Alloy SR356. The fabried column is tapered at 0.14” per foot and is availablvariable heights. The column can be supplied eismooth or with vertical flutes in patterns of 8 sharp, 12and 16 sharp. Steel columns are available in 11 angauge as standard with other wall thicknesses availupon request. Aluminum column wall thickness rafrom 0.125” to 0.25” with other thicknesses availupon request or as determined by application. For mordepth information on materials, please refer to Materiathe Accessories Section.
Dimensions
Available post heights range from 10’ to 19’ in incremas small as 1”. The cast base has a round cross secwith a base diameter of 17”. The fabricated shaft hbase plate with four slotted openings for anchor bolts offers a standard bolt circle of 11”. Other bolt circlesavailable upon request. Tenon size is variable and baupon application.
Installation
The base is supplied as a two piece clam shell to access to the anchor bolts. It also allows access to the hhole opening in the column for wiring. Opposite the hhole opening inside the column are a 1/4-20 nut provisfor a ground lug, by others. Anchor bolts supplied areASTM A36M G55 and are fully hot dip galvanizeASTM A153.
Catalog No.: WSH-1719’-0”
15’-0”
10’-0”
Ordering GuideCast Base Example: IWBWSH-17-CB (Cast Iron Wrap Base Washington-17”Dia. Base-Finish Classic Black)
Material Base: Base Configuration:_____ I Cast Iron_____ D Cast Ductile Iron _____WB Wrap Base WSH-17-(coatings see below)_____ A Cast Aluminum
Column Example: SSH8S-G11-6.00-19-TN2.88/3.00-323/2NW-CB (SteelShaft 8 Flute-11 Gauge-6.00 Shaft Dia.-19’ Ht.-Tenon 2 7/8” Dia. x 3” Ht.-3/4”x 24” Anchor Bolts / 2 Nuts & Washers per anchor bolt-Finish Classic Black)
Material Column:_____ SSH Steel Shaft _____ ASH Aluminum Shaft
Column Configuration:_____SS Smooth Straight _____ST Smooth Tapered_____8S 8 Sharp Flute _____E3 3.5” Fluted Aluminum_____2F 12 Flat Flute _____E5 5.0” Fluted Aluminum _____6S 16 Sharp Flute _____H5 5.0” Fluted Heavy Wall Aluminum_____OC Octagonal _____E8 8.0” Fluted Aluminum
Column Thickness-Shaft Diameter at Grade-Height (max ht. 19’-0”):_____G11 11 Gauge-6.0-____- _____SC4 Schedule 40-X.X-____ -_____G17 7 Gauge- 6.0-____- _____SC8 Schedule 80-X.X-____-_____G24 3 Gauge- 6.0-____-_____A12 .125”thk alum.-6.75-____- _____A18 .188”thk alum.-6.75-____-_____A20 .200”thk alum.-6.75-____- _____A25 .250”thk alum.-6.75-____-
Post Top Tenon:_____ TN2.88/2.50- 2 7/8” Dia.. x 2 1/2” Ht._____ TN2.88/3.00- 2 7/8” Dia.. x 3” Ht._____ TN3.50/3.00- 3 1/2” Dia.. x 3” H_____ TNXX/XX- Other, please specify: ________” Dia.. x ________” Ht.
Accessories: (See Accessorie Section)
Anchor Bolts:_____ 323/ 3/4” x 24” _____ 124/ 1” x 24” _____ 136/ 1” x 36”_____ 330/ 3/4” x 30” _____ 130/ 1” x 30” _____ 140/ 1” x 40”_____ XXX/ Other _____ 999/ Not required_____ 1NW- 1Nut & Washer / Bolt _____ 2NW- 2 Nuts & Washers / Bolt
Coatings (Paint Finish - For detailed information, see Finish in the Specification Section):_____ PO Prime Paint _____ CB Finish Classic Black_____ BG Finish Bottle Green _____ DB Finish Dark Bronze_____ LB Finish Long Beach Blue _____ GI Finish Grey Iron_____ VG Finish Verde Green _____ CW Finish Custom Wet_____ CU Finish Custom Powder Coat _____ XX Other_____ GV Galvanized _____ UF Unfinished
Washington - Bi-Metal cast base and fabricat-ed column. One piece all cast material versionof this style available, see the Lighting Post -Cast Section
SPRING CITY ELECTRICAL MFG. CO., INC.Hall & Main Streets, P. O. Box 19Spring City, PA 19475-0019Phone: 610-948-4000 Fax: 610-948-5577Website: www.springci ty.com
Page: BP 8
6”, 7” or 9”Dia. as deter-mined by col-umn diam.
Max. ht.19’-0”
5 3/4” Dia.
17” Dia.
17” Diameter
11” (4) Slotted openings to accommodateanchor bolts
6” O. D. of Steel Shaft
11” Diameter Bolt CircleCL of Hand Hole
1’-6”
SPRING CITY ELECTRICAL MFG. CO., INHall & Main Streets, P. O. Box 19Spring City, PA 19475-0019Phone: 610-948-4000 Fax: 610-948-5577Website: www.springci ty.com
Page: BP 9
Washington Bi-Metal Post18” One Piece Slip Base
S p e c i f i c a t i o n
Description
The Washington Bi-Metal post consists of a cast base uin combination with a fabricated column. The fabriccolumn mounts to the foundation at grade and carriesstructural load. The cast base serves both a decorativeprotective function.
Post Material
The base is a heavy wall metal casting available in giron per ASTM A48, ductile Iron per ASTM A536 aluminum per ASTM B26-95 Alloy SR356. The fabried column is tapered at 0.14” per foot and is availablvariable heights. The column can be supplied eismooth or with vertical flutes in patterns of 8 sharp, 12and 16 sharp. Steel columns are available in 11 angauge as standard with other wall thicknesses availupon request. Aluminum column wall thickness rafrom 0.125” to 0.25” with other thicknesses availupon request or as determined by application. For mordepth information on materials, please refer to Materiathe Accessories Section.
Dimensions
Available post heights range from 10’ to 30’ in incremas small as 1”. The cast base has a round cross secwith a base diameter of 18”. The fabricated shaft hbase plate with four slotted openings for anchor bolts offers a standard bolt circle of 12”. Other bolt circlesavailable upon request. Tenon size is variable and baupon application.
Installation
A single access door is located in the base to provaccess to the anchor bolts. The door in the base coincwith the hand hole opening in the column for wiaccess. Opposite the hand hole opening inside the coluare a 1/4-20 nut provisions for a ground lug, by othAnchor bolts supplied are per ASTM A36M G55 andfully hot dip galvanized to ASTM A153.
Catalog No.: WSH-1830’-0”
20’-0”
10’-0”
Ordering GuideCast Base Example: ISBWSH-18-CB (Cast Iron Slip Base Washington-18” Dia.Base-Finish Classic Black)
Material Base: Base Configuration:_____ I Cast Iron_____ D Cast Ductile Iron _____SB Slip Base WSH-18-(coatings see below)_____ A Cast Aluminum
Column Example: SSH2F-G11-7.50-30-TN2.88/3.00-3230/2NW-CB (SteelShaft 12 Flute-11 Gauge-7.50 Shaft Dia.-30’ Ht.-Tenon 2 7/8” Dia. x 3” Ht.-3/4”x 24” Anchor Bolts / 2 Nuts & Washers per anchor bolt-Finish Classic Black)
Material Column:_____ SSH Steel Shaft _____ ASH Aluminum Shaft
Column Configuration:_____SS Smooth Straight _____ST Smooth Tapered_____8S 8 Sharp Flute _____E3 3.5” Fluted Aluminum_____2F 12 Flat Flute _____E5 5.0” Fluted Aluminum _____6S 16 Sharp Flute _____H5 5.0” Fluted Heavy Wall Aluminum_____OC Octagonal _____E8 8.0” Fluted Aluminum
Column Thickness-Shaft Diameter at Grade-Height (max ht. 30’-0”):_____G11 11 Gauge-7.5-____- _____SC4 Schedule 40-X.X-____ -_____G17 7 Gauge- 7.5-____- _____SC8 Schedule 80-X.X-____-_____G24 3 Gauge- 7.5-____-_____A12 .125”thk alum.-6.75-____- _____A18 .188”thk alum.-6.75-____-_____A20 .200”thk alum.-6.75-____- _____A25 .250”thk alum.-6.75-____-
Post Top Tenon:_____ TN2.88/2.50- 2 7/8” Dia.. x 2 1/2” Ht._____ TN2.88/3.00- 2 7/8” Dia.. x 3” Ht._____ TN3.50/3.00- 3 1/2” Dia.. x 3” H_____ TNXX/XX- Other, please specify: ________” Dia.. x ________” Ht.
Accessories: (See Accessorie Section)
Anchor Bolts:_____ 323/ 3/4” x 24” _____ 124/ 1” x 24” _____ 136/ 1” x 36”_____ 330/ 3/4” x 30” _____ 130/ 1” x 30” _____ 140/ 1” x 40”_____ XXX/ Other _____ 999/ Not required_____ 1NW- 1Nut & Washer / Bolt _____ 2NW- 2 Nuts & Washers / Bolt
Coatings (Paint Finish - For detailed information, see Finish in the Specification Section):_____ PO Prime Paint _____ CB Finish Classic Black_____ BG Finish Bottle Green _____ DB Finish Dark Bronze_____ LB Finish Long Beach Blue _____ GI Finish Grey Iron_____ VG Finish Verde Green _____ CW Finish Custom Wet_____ CU Finish Custom Powder Coat _____ XX Other_____ GV Galvanized _____ UF Unfinished
Washington - Bi-Metal cast base and fabricat-ed column. One piece all cast material versionof this style available, see the Lighting Post -Cast Section
SPRING CITY ELECTRICAL MFG. CO., INC.Hall & Main Streets, P. O. Box 19Spring City, PA 19475-0019Phone: 610-948-4000 Fax: 610-948-5577Website: www.springci ty.com
Page: BP 10
6”, 7” or 9”Dia. as deter-mined by col-umn diam.
Max. ht.30’-0”
18” Dia.
AccessDoor
7 1/8” Dia.
18” Diameter
11 3/4”
(4) Slotted openings to accommodateanchor bolts
7 1/2” O. D. of Steel Shaft
12” Diameter Bolt Circle
CL of Hand Hole and Access Door
1’-9 3/4”
SPRING CITY ELECTRICAL MFG. CO., INHall & Main Streets, P. O. Box 19Spring City, PA 19475-0019Phone: 610-948-4000 Fax: 610-948-5577Website: www.springci ty.com
Page: BP 11
Washington Bi-Metal Post21” Two Piece Wrap Base
S p e c i f i c a t i o n
Description
The Washington Bi-Metal post consists of a cast base uin combination with a fabricated column. The fabriccolumn mounts to the foundation at grade and carriesstructural load. The cast base serves both a decorativeprotective function.
Post Material
The base is a heavy wall metal casting available in giron per ASTM A48, ductile Iron per ASTM A536 aluminum per ASTM B26-95 Alloy SR356. The fabried column is tapered at 0.14” per foot and is availablvariable heights. The column can be supplied eismooth or with vertical flutes in patterns of 8 sharp, 12and 16 sharp. Steel columns are available in 11 angauge as standard with other wall thicknesses availupon request. Aluminum column wall thickness rafrom 0.125” to 0.25” with other thicknesses availupon request or as determined by application. For mordepth information on materials, please refer to Materiathe Accessories Section.
Dimensions
Available post heights range from 10’ to 30’ in incremas small as 1”. The cast base has a round cross secwith a base diameter of 21”. The fabricated shaft hbase plate with four slotted openings for anchor bolts offers a standard bolt circle of 12”. Other bolt circlesavailable upon request. Tenon size is variable and baupon application.
Installation
A single access door is located in the base to provaccess to the anchor bolts. The door in the base coincwith the hand hole opening in the column for wiaccess. Opposite the hand hole opening inside the coluare a 1/4-20 nut provisions for a ground lug, by othAnchor bolts supplied are per ASTM A36M G55 andfully hot dip galvanized to ASTM A153.
Catalog No.: WSH-2130’-0”
20’-0”
10’-0”
Ordering GuideCast Base Example: IWBWSH-21-CB (Cast Iron Wrap Base Washington-21”Dia. Base-Finish Classic Black)
Material Base: Base Configuration:_____ I Cast Iron_____ D Cast Ductile Iron _____WB Wrap Base WSH-21-(coatings see below)_____ A Cast Aluminum
Column Example: SSH6S-G11-7.50-30TN2.88/3.00-130/2NW-CB (Steel Shaft16 Flute-11 Gauge-7.50 Shaft Dia.-30’ Ht.-Tenon 2 7/8” Dia. x 3” Ht.-1” x 30”Anchor Bolts / 2 Nuts & Washers per anchor bolt-Finish Classic Black)
Material Column:_____ SSH Steel Shaft _____ ASH Aluminum Shaft
Column Configuration:_____SS Smooth Straight _____ST Smooth Tapered_____8S 8 Sharp Flute _____E3 3.5” Fluted Aluminum_____2F 12 Flat Flute _____E5 5.0” Fluted Aluminum _____6S 16 Sharp Flute _____H5 5.0” Fluted Heavy Wall Aluminum_____OC Octagonal _____E8 8.0” Fluted Aluminum
Column Thickness-Shaft Diameter at Grade-Height (max ht. 30’-0”):_____G11 11 Gauge-7.5-____- _____SC4 Schedule 40-X.X-____ -_____G17 7 Gauge- 7.5-____- _____SC8 Schedule 80-X.X-____-_____G24 3 Gauge- 7.5-____-_____A12 .125”thk alum.-6.75-____- _____A18 .188”thk alum.-6.75-____-_____A20 .200”thk alum.-6.75-____- _____A25 .250”thk alum.-6.75-____-
Post Top Tenon:_____ TN2.88/2.50- 2 7/8” Dia.. x 2 1/2” Ht._____ TN2.88/3.00- 2 7/8” Dia.. x 3” Ht._____ TN3.50/3.00- 3 1/2” Dia.. x 3” H_____ TNXX/XX- Other, please specify: ________” Dia.. x ________” Ht.
Accessories: (See Accessorie Section)
Anchor Bolts:_____ 323/ 3/4” x 24” _____ 124/ 1” x 24” _____ 136/ 1” x 36”_____ 330/ 3/4” x 30” _____ 130/ 1” x 30” _____ 140/ 1” x 40”_____ XXX/ Other _____ 999/ Not required_____ 1NW- 1Nut & Washer / Bolt _____ 2NW- 2 Nuts & Washers / Bolt
Coatings (Paint Finish - For detailed information, see Finish in the Specification Section):_____ PO Prime Paint _____ CB Finish Classic Black_____ BG Finish Bottle Green _____ DB Finish Dark Bronze_____ LB Finish Long Beach Blue _____ GI Finish Grey Iron_____ VG Finish Verde Green _____ CW Finish Custom Wet_____ CU Finish Custom Powder Coat _____ XX Other_____ GV Galvanized _____ UF Unfinished
Washington - Bi-Metal cast base and fabricat-ed column. One piece all cast material versionof this style available, see the Lighting Post -Cast Section
SPRING CITY ELECTRICAL MFG. CO., INC.Hall & Main Streets, P. O. Box 19Spring City, PA 19475-0019Phone: 610-948-4000 Fax: 610-948-5577Website: www.springci ty.com
Page: BP 12
6”, 7” or 9”Dia. as deter-mined by col-umn diam.
AccessDoor
Max. ht.30’-0”
21” Dia.
7 1/4” Dia.
21” Diameter11 3/4”
(4) Slotted openings to accommodateanchor bolts
7 1/2” O. D. of Steel Shaft
12” Diameter Bolt Circle
CL of Hand Hole and Access Door
2’-3 3/4”
SPRING CITY ELECTRICAL MFG. CO., INHall & Main Streets, P. O. Box 19Spring City, PA 19475-0019Phone: 610-948-4000 Fax: 610-948-5577Website: www.springci ty.com
Page: BP 13
Washington Bi-Metal Post24” One Piece Slip or Two Piece Wrap Base
S p e c i f i c a t i o n
Description
The Washington Bi-Metal post consists of a cast base uin combination with a fabricated column. The fabriccolumn mounts to the foundation at grade and carriesstructural load. The cast base serves both a decorativeprotective function.
Post Material
The base is a heavy wall metal casting available in giron per ASTM A48, ductile Iron per ASTM A536 aluminum per ASTM B26-95 Alloy SR356. The fabried column is tapered at 0.14” per foot and is availablvariable heights. The column can be supplied eismooth or with vertical flutes in patterns of 8 sharp, 12and 16 sharp. Steel columns are available in 11 angauge as standard with other wall thicknesses availupon request. Aluminum column wall thickness rafrom 0.125” to 0.25” with other thicknesses availupon request or as determined by application. For mordepth information on materials, please refer to Materiathe Accessories Section.
Dimensions
Available post heights range from 10’ to 30’ in incremas small as 1”. The cast base has a round cross secwith a base diameter of 24”. The fabricated shaft hbase plate with four slotted openings for anchor bolts offers a standard bolt circle of 12”. Other bolt circlesavailable upon request. Tenon size is variable and baupon application.
Installation
A single access door is located in the base to provaccess to the anchor bolts. The door in the base coincwith the hand hole opening in the column for wiaccess. Opposite the hand hole opening inside the coluare a 1/4-20 nut provisions for a ground lug, by othAnchor bolts supplied are per ASTM A36M G55 andfully hot dip galvanized to ASTM A153.
Catalog No.: WSH-2430’-0”
20’-0”
10’-0”
Ordering GuideCast Base Example: ISBWSH-24-CB (Cast Iron Slip Base Washington-24”Dia. Base-Finish Classic Black)
Material Base: Base Configuration:_____ I Cast Iron _____SB Slip Base WSH-24-(coatings see below)_____ D Cast Ductile Iron _____WB Wrap Base WSH-24-(coatings see below)_____ A Cast Aluminum
Column Example: SSH2F-G11-7.50-30-TN2.88/3.00-130/2NW-CB (SteelShaft 12 Flute-11 Gauge-7.50 Shaft Dia.-30’ Ht.-Tenon 2 7/8” Dia. x 3” Ht.-1”x 30” Anchor Bolts / 2 Nuts & Washers per anchor bolt-Finish Classic Black)
Material Column:_____ SSH Steel Shaft _____ ASH Aluminum Shaft
Column Configuration:_____SS Smooth Straight _____ST Smooth Tapered_____8S 8 Sharp Flute _____E3 3.5” Fluted Aluminum_____2F 12 Flat Flute _____E5 5.0” Fluted Aluminum _____6S 16 Sharp Flute _____H5 5.0” Fluted Heavy Wall Aluminum_____OC Octagonal _____E8 8.0” Fluted Aluminum
Column Thickness-Shaft Diameter at Grade-Height (max ht. 30’-0”):_____G11 11 Gauge-7.5-____- _____SC4 Schedule 40-X.X-____ -_____G17 7 Gauge- 7.5-____- _____SC8 Schedule 80-X.X-____-_____G24 3 Gauge- 7.5-____-_____A12 .125”thk alum.-6.75-____- _____A18 .188”thk alum.-6.75-____-_____A20 .200”thk alum.-6.75-____- _____A25 .250”thk alum.-6.75-____-
Post Top Tenon:_____ TN2.88/2.50- 2 7/8” Dia.. x 2 1/2” Ht._____ TN2.88/3.00- 2 7/8” Dia.. x 3” Ht._____ TN3.50/3.00- 3 1/2” Dia.. x 3” H_____ TNXX/XX- Other, please specify: ________” Dia.. x ________” Ht.
Accessories: (See Accessorie Section)
Anchor Bolts:_____ 323/ 3/4” x 24” _____ 124/ 1” x 24” _____ 136/ 1” x 36”_____ 330/ 3/4” x 30” _____ 130/ 1” x 30” _____ 140/ 1” x 40”_____ XXX/ Other _____ 999/ Not required_____ 1NW- 1Nut & Washer / Bolt _____ 2NW- 2 Nuts & Washers / Bolt
Coatings (Paint Finish - For detailed information, see Finish in the Specification Section):_____ PO Prime Paint _____ CB Finish Classic Black_____ BG Finish Bottle Green _____ DB Finish Dark Bronze_____ LB Finish Long Beach Blue _____ GI Finish Grey Iron_____ VG Finish Verde Green _____ CW Finish Custom Wet_____ CU Finish Custom Powder Coat _____ XX Other_____ GV Galvanized _____ UF Unfinished
Washington - Bi-Metal cast base and fabricat-ed column. One piece all cast material versionof this style available, see the Lighting Post -Cast Section
SPRING CITY ELECTRICAL MFG. CO., INC.Hall & Main Streets, P. O. Box 19Spring City, PA 19475-0019Phone: 610-948-4000 Fax: 610-948-5577Website: www.springci ty.com
Page: BP 14
6”, 7” or 9”Dia. as deter-mined by col-umn diam.
Max. ht.30’-0”
7 1/4” Dia.
AccessDoor
24” Dia.
24” Diameter11 3/4”
(4) Slotted openings to accommodateanchor bolts
7 1/2” O. D. of Steel Shaft
12” Diameter Bolt Circle
CL of Hand Hole and Access Door
2’-3 3/4”
SPRING CITY ELECTRICAL MFG. CO., INHall & Main Streets, P. O. Box 19Spring City, PA 19475-0019Phone: 610-948-4000 Fax: 610-948-5577Website: www.springci ty.com
Page: BP 15
Grand Washington Bi-Metal Post25” One Piece Slip or Two Piece Wrap Base
S p e c i f i c a t i o n
Description
The Grand Washington Bi-Metal post consists of a base used in combination with a fabricated column. fabricated column mounts to the foundation at grade carries the structural load. The cast base serves bodecorative and protective function.
Post Material
The base is a heavy wall metal casting available in giron per ASTM A48, ductile Iron per ASTM A536 aluminum per ASTM B26-95 Alloy SR356. The fabried column is tapered at 0.14” per foot and is availablvariable heights. The column can be supplied eismooth or with vertical flutes in patterns of 8 sharp, 12and 16 sharp. Steel columns are available in 11 angauge as standard with other wall thicknesses availupon request. Aluminum column wall thickness rafrom 0.125” to 0.25” with other thicknesses availupon request or as determined by application. For mordepth information on materials, please refer to Materiathe Accessories Section.
Dimensions
Available post heights range from 10’ to 30’ in incremas small as 1”. The cast base has an octagonal cross tion with a base dimension of 25”. The fabricated shas a base plate with four slotted openings for anchor band offers a standard bolt circle of 12”. Other bolt cirare available upon request. Tenon size is variable based upon application.
Installation
A single access door is located in the base to provaccess to the anchor bolts. The door in the base coincwith the hand hole opening in the column for wiaccess. Opposite the hand hole opening inside the coluare a 1/4-20 nut provisions for a ground lug, by othAnchor bolts supplied are per ASTM A36M G55 andfully hot dip galvanized to ASTM A153.
Catalog No.: WSH-2530’-0”
20’-0”
10’-0”
Ordering GuideCast Base Example: ISBWSH-25-CB (Cast Iron Slip Base Grand Washington-25” Oct. Base-Finish Classic Black)
Material Base: Base Configuration:_____ I Cast Iron _____SB Slip Base WSH-25-(coatings see below)_____ D Cast Ductile Iron _____WB Wrap Base WSH-25-(coatings see below)_____ A Cast Aluminum
Column Example: SSH6S-G11-9.00-30-TN2.88/3.00-130/2NW-CB (SteelShaft 16 Flute-11 Gauge-9.00 Shaft Dia.-30’ Ht.-Tenon 2 7/8” Dia. x 3” Ht.-1”x 30” Anchor Bolts / 2 Nuts & Washers per anchor bolt-Finish Classic Black)
Material Column:_____ SSH Steel Shaft _____ ASH Aluminum Shaft
Column Configuration:_____SS Smooth Straight _____ST Smooth Tapered_____8S 8 Sharp Flute _____E3 3.5” Fluted Aluminum_____2F 12 Flat Flute _____E5 5.0” Fluted Aluminum _____6S 16 Sharp Flute _____H5 5.0” Fluted Heavy Wall Aluminum_____OC Octagonal _____E8 8.0” Fluted Aluminum
Column Thickness-Shaft Diameter at Grade-Height (max ht. 30’-0”):_____G11 11 Gauge-9.0-____- _____SC4 Schedule 40-X.X-____ -_____G17 7 Gauge- 9.0-____- _____SC8 Schedule 80-X.X-____-_____G24 3 Gauge- 9.0-____-_____A12 .125”thk alum.-6.75-____- _____A18 .188”thk alum.-6.75-____-_____A20 .200”thk alum.-6.75-____- _____A25 .250”thk alum.-6.75-____-
Post Top Tenon:_____ TN2.88/2.50- 2 7/8” Dia.. x 2 1/2” Ht._____ TN2.88/3.00- 2 7/8” Dia.. x 3” Ht._____ TN3.50/3.00- 3 1/2” Dia.. x 3” H_____ TNXX/XX- Other, please specify: ________” Dia.. x ________” Ht.
Accessories: (See Accessorie Section)
Anchor Bolts:_____ 323/ 3/4” x 24” _____ 124/ 1” x 24” _____ 136/ 1” x 36”_____ 330/ 3/4” x 30” _____ 130/ 1” x 30” _____ 140/ 1” x 40”_____ XXX/ Other _____ 999/ Not required_____ 1NW- 1Nut & Washer / Bolt _____ 2NW- 2 Nuts & Washers / Bolt
Coatings (Paint Finish - For detailed information, see Finish in the Specification Section):_____ PO Prime Paint _____ CB Finish Classic Black_____ BG Finish Bottle Green _____ DB Finish Dark Bronze_____ LB Finish Long Beach Blue _____ GI Finish Grey Iron_____ VG Finish Verde Green _____ CW Finish Custom Wet_____ CU Finish Custom Powder Coat _____ XX Other_____ GV Galvanized _____ UF Unfinished
Grand Washington - Bi-Metal cast base andfabricated column. One piece all cast materialversion of this style available, see the LightingPost - Cast Section
SPRING CITY ELECTRICAL MFG. CO., INC.Hall & Main Streets, P. O. Box 19Spring City, PA 19475-0019Phone: 610-948-4000 Fax: 610-948-5577Website: www.springci ty.com
Page: BP 16
6”, 7” or 9”Dia. as deter-mined by col-umn diam.
8 3/4” Dia.
AccessDoor
25” Oct.
Max. ht.30’-0”
25” Octagonal
11 3/4”
(4) Slotted openings to accommodateanchor bolts
9” O. D. of Steel Shaft
12” Diameter Bolt Circle
CL of Hand Hole and Access Door
1’-9
3/4
”
SPRING CITY ELECTRICAL MFG. CO., INHall & Main Streets, P. O. Box 19Spring City, PA 19475-0019Phone: 610-948-4000 Fax: 610-948-5577Website: www.springci ty.com
Page: BP 17
Old DC Mall Bi-Metal Post25” Slip Base
S p e c i f i c a t i o n
Description
The Old DC Mall Bi-Metal post consists of a cast bused in combination with a fabricated column. The facated column mounts to the foundation at grade and ries the structural load. The cast base serves both a drative and protective function.
Post Material
The base is a heavy wall metal casting available in giron per ASTM A48, ductile Iron per ASTM A536 aluminum per ASTM B26-95 Alloy SR356. The fabried column is tapered at 0.14” per foot and is availablvariable heights. The column can be supplied eismooth or with vertical flutes in patterns of 8 sharp, 12and 16 sharp. Steel columns are available in 11 angauge as standard with other wall thicknesses availupon request. Aluminum column wall thickness rafrom 0.125” to 0.25” with other thicknesses availupon request or as determined by application. For mordepth information on materials, please refer to Materiathe Accessories Section.
Dimensions
Available post heights range from 10’ to 30’ in incremas small as 1”. The cast base has an octagonal cross tion with a base dimension of 25”. The fabricated shas a base plate with four slotted openings for anchor band offers a standard bolt circle of 12”. Other bolt cirare available upon request. Tenon size is variable based upon application.
Installation
A hand hole opening is located in the column for wiaccess. Opposite the hand hole opening inside the coluare a 1/4-20 nut provisions for a ground lug, by othAnchor bolts supplied are per ASTM A36M G55 andfully hot dip galvanized to ASTM A153.
Catalog No.: ODC-2530’-0”
20’-0”
10’-0”
Ordering GuideCast Base Example: ISBODC-25-CB (Cast Iron Slip Base Old DC Mall-25”Oct. Base-Finish Classic Black)
Material Base: Base Configuration:_____ I Cast Iron_____ D Cast Ductile Iron _____SB Slip Base ODC-25-(coatings see below)_____ A Cast Aluminum
Column Example: SSH2F-G11-7.50-30-TN2.88/3.00-130/2NW-CB (SteelShaft 12 Flute-11 Gauge-7.50 Shaft Dia.-30’ Ht.-Tenon 2 7/8” Dia. x 3” Ht.-1”x 30” Anchor Bolts / 2 Nuts & Washers per anchor bolt-Finish Classic Black)
Material Column:_____ SSH Steel Shaft _____ ASH Aluminum Shaft
Column Configuration:_____SS Smooth Straight _____ST Smooth Tapered_____8S 8 Sharp Flute _____E3 3.5” Fluted Aluminum_____2F 12 Flat Flute _____E5 5.0” Fluted Aluminum _____6S 16 Sharp Flute _____H5 5.0” Fluted Heavy Wall Aluminum_____OC Octagonal _____E8 8.0” Fluted Aluminum
Column Thickness-Shaft Diameter at Grade-Height (max ht. 30’-0”):_____G11 11 Gauge-7.5-____- _____SC4 Schedule 40-X.X-____ -_____G17 7 Gauge- 7.5-____- _____SC8 Schedule 80-X.X-____-_____G24 3 Gauge- 7.5-____-_____A12 .125”thk alum.-6.75-____- _____A18 .188”thk alum.-6.75-____-_____A20 .200”thk alum.-6.75-____- _____A25 .250”thk alum.-6.75-____-
Post Top Tenon:_____ TN2.88/2.50- 2 7/8” Dia.. x 2 1/2” Ht._____ TN2.88/3.00- 2 7/8” Dia.. x 3” Ht._____ TN3.50/3.00- 3 1/2” Dia.. x 3” H_____ TNXX/XX- Other, please specify: ________” Dia.. x ________” Ht.
Accessories: (See Accessorie Section)
Anchor Bolts:_____ 323/ 3/4” x 24” _____ 124/ 1” x 24” _____ 136/ 1” x 36”_____ 330/ 3/4” x 30” _____ 130/ 1” x 30” _____ 140/ 1” x 40”_____ XXX/ Other _____ 999/ Not required_____ 1NW- 1Nut & Washer / Bolt _____ 2NW- 2 Nuts & Washers / Bolt
Coatings (Paint Finish - For detailed information, see Finish in the Specification Section):_____ PO Prime Paint _____ CB Finish Classic Black_____ BG Finish Bottle Green _____ DB Finish Dark Bronze_____ LB Finish Long Beach Blue _____ GI Finish Grey Iron_____ VG Finish Verde Green _____ CW Finish Custom Wet_____ CU Finish Custom Powder Coat _____ XX Other_____ GV Galvanized _____ UF Unfinished
Old DC Mall - Bi-Metal cast base and fabri-cated column.
SPRING CITY ELECTRICAL MFG. CO., INC.Hall & Main Streets, P. O. Box 19Spring City, PA 19475-0019Phone: 610-948-4000 Fax: 610-948-5577Website: www.springci ty.com
Page: BP 18
6”, 7” or 9”Dia. asdeterminedby columndiam.
Max. ht.30’-0”
7 1/4” Dia.
25” Oct.
25” Octagonal
11 3/4”
(4) Slotted openings to accommodateanchor bolts7 1/2” O. D. of Steel Shaft
12” Diameter Bolt Circle
CL of Hand Hole
1’-3
”
SPRING CITY ELECTRICAL MFG. CO., INHall & Main Streets, P. O. Box 19Spring City, PA 19475-0019Phone: 610-948-4000 Fax: 610-948-5577Website: www.springci ty.com
Page: BP 19
City of Boston Bi-Metal Post18” One Piece Slip Base
S p e c i f i c a t i o n
Description
The City of Boston Bi-Metal post consists of a cast bused in combination with a fabricated column. The facated column mounts to the foundation at grade and ries the structural load. The cast base serves both a drative and protective function.
Post Material
The base is a heavy wall metal casting available in giron per ASTM A48, ductile Iron per ASTM A536 aluminum per ASTM B26-95 Alloy SR356. The fabried column is tapered at 0.14” per foot and is availablvariable heights. The column can be supplied eismooth or with vertical flutes in patterns of 8 sharp, 12and 16 sharp. Steel columns are available in 11 angauge as standard with other wall thicknesses availupon request. Aluminum column wall thickness rafrom 0.125” to 0.25” with other thicknesses availupon request or as determined by application. For mordepth information on materials, please refer to Materiathe Accessories Section.
Dimensions
Available post heights range from 10’ to 22’ in incremas small as 1”. The cast base has a round cross secwith a base diameter of 18”. The fabricated shaft hbase plate with four slotted openings for anchor bolts offers a standard bolt circle of 17”. Other bolt circlesavailable upon request. Tenon size is variable and baupon application.
Installation
A hand hole opening is located in the column for wiaccess. Opposite the hand hole opening inside the coluare a 1/4-20 nut provisions for a ground lug, by othAnchor bolts supplied are per ASTM A36M G55 andfully hot dip galvanized to ASTM A153.
Catalog No.: CTB-1822’-0”
16’-5”
13’-4”
11’-4”
Ordering GuideCast Base Example: ISBCTB-18-CB (Cast Iron Slip Base City of Boston-18”Dia. Base-Finish Classic Black)
Material Base: Base Configuration:_____ I Cast Iron_____ D Cast Ductile Iron _____SB Slip Base CTB-18-(coatings see below)_____ A Cast Aluminum
Column Example: SSH2F-G11-6.57-22-TN2.88/3.00-130/2NW-CB (SteelShaft 12 Flute-11 Gauge-6.57 Shaft Dia.-22’ Ht.-Tenon 2 7/8” Dia. x 3” Ht.-1”x 30” Anchor Bolts / 2 Nuts & Washers per anchor bolt-Finish Classic Black)
Material Column:_____ SSH Steel Shaft _____ ASH Aluminum Shaft
Column Configuration:_____SS Smooth Straight _____ST Smooth Tapered_____8S 8 Sharp Flute _____E3 3.5” Fluted Aluminum_____2F 12 Flat Flute _____E5 5.0” Fluted Aluminum _____6S 16 Sharp Flute _____H5 5.0” Fluted Heavy Wall Aluminum_____OC Octagonal _____E8 8.0” Fluted Aluminum
Column Thickness-Shaft Diameter at Grade-Height (max ht. 22’-0”):_____G11 11 Gauge-6.57-____- _____SC4 Schedule 40-X.X-____ -_____G17 7 Gauge- 6.57-____- _____SC8 Schedule 80-X.X-____-_____G24 3 Gauge- 6.57-____-_____A12 .125”thk alum.-6.75-____- _____A18 .188”thk alum.-6.75-____-_____A20 .200”thk alum.-6.75-____- _____A25 .250”thk alum.-6.75-____-
Post Top Tenon:_____ TN2.88/2.50- 2 7/8” Dia.. x 2 1/2” Ht._____ TN2.88/3.00- 2 7/8” Dia.. x 3” Ht._____ TN3.50/3.00- 3 1/2” Dia.. x 3” H_____ TNXX/XX- Other, please specify: ________” Dia.. x ________” Ht.
Accessories: (See Accessorie Section)
Anchor Bolts:_____ 323/ 3/4” x 24” _____ 124/ 1” x 24” _____ 136/ 1” x 36”_____ 330/ 3/4” x 30” _____ 130/ 1” x 30” _____ 140/ 1” x 40”_____ XXX/ Other _____ 999/ Not required_____ 1NW- 1Nut & Washer / Bolt _____ 2NW- 2 Nuts & Washers / Bolt
Coatings (Paint Finish - For detailed information, see Finish in the Specification Section):_____ PO Prime Paint _____ CB Finish Classic Black_____ BG Finish Bottle Green _____ DB Finish Dark Bronze_____ LB Finish Long Beach Blue _____ GI Finish Grey Iron_____ VG Finish Verde Green _____ CW Finish Custom Wet_____ CU Finish Custom Powder Coat _____ XX Other_____ GV Galvanized _____ UF Unfinished
City of Boston - Bi-Metal cast base and fab-ricated column. One piece all cast materialversion of this style available, see the LightingPost - Cast Section
SPRING CITY ELECTRICAL MFG. CO., INC.Hall & Main Streets, P. O. Box 19Spring City, PA 19475-0019Phone: 610-948-4000 Fax: 610-948-5577Website: www.springci ty.com
Page: BP 20
6”, 7” or 9” Dia.as determined bycolumn diam.
Max. ht.22’-0”
6 1/4” Dia.
18” Dia.
6”
18” Diameter
11 3/4” (4) Slotted openings to accommodateanchor bolts
6.57” O. D. of Steel ShaftSuggestedFinishGrade
Adaptor Optional
17” Diameter Bolt Circle
2’-4
1/2
”
SPRING CITY ELECTRICAL MFG. CO., INHall & Main Streets, P. O. Box 19Spring City, PA 19475-0019Phone: 610-948-4000 Fax: 610-948-5577Website: www.springci ty.com
Page: BP 21
City of Boston II Bi-Metal Post18” One Piece Slip Base
S p e c i f i c a t i o n
Description
The City of Boston II Bi-Metal post consists of a cast bused in combination with a fabricated column. The facated column mounts to the foundation at grade and ries the structural load. The cast base serves both a drative and protective function.
Post Material
The base is a heavy wall metal casting available in giron per ASTM A48, ductile Iron per ASTM A536 aluminum per ASTM B26-95 Alloy SR356. The fabried column is tapered at 0.14” per foot and is availablvariable heights. The column can be supplied eismooth or with vertical flutes in patterns of 8 sharp, 12and 16 sharp. Steel columns are available in 11 angauge as standard with other wall thicknesses availupon request. Aluminum column wall thickness rafrom 0.125” to 0.25” with other thicknesses availupon request or as determined by application. For mordepth information on materials, please refer to Materiathe Accessories Section.
Dimensions
Available post heights range from 10’ to 30’ in incremas small as 1”. The cast base has a round cross secwith a base diameter of 18”. The fabricated shaft hbase plate with four slotted openings for anchor bolts offers a standard bolt circle of 17”. Other bolt circlesavailable upon request. Tenon size is variable and baupon application.
Installation
A hand hole opening is located in the column for wiaccess. Opposite the hand hole opening inside the coluare a 1/4-20 nut provisions for a ground lug, by othAnchor bolts supplied are per ASTM A36M G55 andfully hot dip galvanized to ASTM A153.
Catalog No.: CTT-1830’-0”
25’-0”
10’-0”
Ordering GuideCast Base Example: ISBCTT-18-CB (Cast Iron Slip Base City of Boston II-18”Dia. Base-Finish Classic Black)
Material Base: Base Configuration:_____ I Cast Iron_____ D Cast Ductile Iron _____SB Slip Base CTT-18-(coatings see below)_____ A Cast Aluminum
Column Example: SSH2F-G11-7.50-30-TN2.88/3.00-130/2NW-CB (SteelShaft 12 Flute-11 Gauge-7.50 Shaft Dia.-30’ Ht.-Tenon 2 7/8” Dia. x 3” Ht.-1”x 30” Anchor Bolts / 2 Nuts & Washers per anchor bolt-Finish Classic Black)
Material Column:_____ SSH Steel Shaft _____ ASH Aluminum Shaft
Column Configuration:_____SS Smooth Straight _____ST Smooth Tapered_____8S 8 Sharp Flute _____E3 3.5” Fluted Aluminum_____2F 12 Flat Flute _____E5 5.0” Fluted Aluminum _____6S 16 Sharp Flute _____H5 5.0” Fluted Heavy Wall Aluminum_____OC Octagonal _____E8 8.0” Fluted Aluminum
Column Thickness-Shaft Diameter at Grade-Height (max ht. 30’-0”):_____G11 11 Gauge-7.5-____- _____SC4 Schedule 40-X.X-____ -_____G17 7 Gauge- 7.5-____- _____SC8 Schedule 80-X.X-____-_____G24 3 Gauge- 7.5-____-_____A12 .125”thk alum.-6.75-____- _____A18 .188”thk alum.-6.75-____-_____A20 .200”thk alum.-6.75-____- _____A25 .250”thk alum.-6.75-____-
Post Top Tenon:_____ TN2.88/2.50- 2 7/8” Dia.. x 2 1/2” Ht._____ TN2.88/3.00- 2 7/8” Dia.. x 3” Ht._____ TN3.50/3.00- 3 1/2” Dia.. x 3” H_____ TNXX/XX- Other, please specify: ________” Dia.. x ________” Ht.
Accessories: (See Accessorie Section)
Anchor Bolts:_____ 323/ 3/4” x 24” _____ 124/ 1” x 24” _____ 136/ 1” x 36”_____ 330/ 3/4” x 30” _____ 130/ 1” x 30” _____ 140/ 1” x 40”_____ XXX/ Other _____ 999/ Not required_____ 1NW- 1Nut & Washer / Bolt _____ 2NW- 2 Nuts & Washers / Bolt
Coatings (Paint Finish - For detailed information, see Finish in the Specification Section):_____ PO Prime Paint _____ CB Finish Classic Black_____ BG Finish Bottle Green _____ DB Finish Dark Bronze_____ LB Finish Long Beach Blue _____ GI Finish Grey Iron_____ VG Finish Verde Green _____ CW Finish Custom Wet_____ CU Finish Custom Powder Coat _____ XX Other_____ GV Galvanized _____ UF Unfinished
City of Boston II - Bi-Metal cast base andfabricated column.
SPRING CITY ELECTRICAL MFG. CO., INC.Hall & Main Streets, P. O. Box 19Spring City, PA 19475-0019Phone: 610-948-4000 Fax: 610-948-5577Website: www.springci ty.com
Page: BP 22
6”, 7” or 9” Dia.as determinedby column diam.
7 1/4” Dia.
SuggestedFinishGrade
6”
18” Dia.
Max. ht.30’-0”
18” Diameter
15” (4) Slotted openings to accommodateanchor bolts
7 1/2” O. D. of Steel Shaft
17” Diameter Bolt Circle
2’4
3/4”
SPRING CITY ELECTRICAL MFG. CO., INHall & Main Streets, P. O. Box 19Spring City, PA 19475-0019Phone: 610-948-4000 Fax: 610-948-5577Website: www.springci ty.com
Page: BP 23
Elgin Bi-Metal Post18” One Piece Slip Base
S p e c i f i c a t i o n
Description
The Elgin Bi-Metal post consists of a cast base usecombination with a fabricated column. The fabriccolumn slips into the cast base and the two piecesmechanically attached. The assembly is then mountethe foundation at grade.
Post Material
The base is a heavy wall metal casting available in giron per ASTM A48, ductile Iron per ASTM A536 aluminum per ASTM B26-95 Alloy SR356. The fabried column is tapered at 0.14” per foot and is availablvariable heights. The column can be supplied eismooth or with vertical flutes in patterns of 8 sharp, 12and 16 sharp. Steel columns are available in 11 angauge as standard with other wall thicknesses availupon request. Aluminum column wall thickness rafrom 0.125” to 0.25” with other thicknesses availupon request or as determined by application. For mordepth information on materials, please refer to Materiathe Accessories Section.
Dimensions
Available post heights range from 10’ to 30’ in incremas small as 1”. The cast base has a round cross secwith a base diameter of 18”. The fabricated shaft hstop ring and internal base plate, both used in securingconnection of the base and column. The base has an igrally cast base flange with four slotted openingsanchor bolts and offers a standard bolt circle of Other bolt circles are available upon request. Tenon is variable and based upon application.
Installation
A single access door is located in the base to provaccess to the anchor bolts, for wiring as well as accebility to the mechanical attachment of the column tobase. Opposite the access door opening inside the basa 1/4-20 nut provisions for a ground lug, by othAnchor bolts supplied are per ASTM A36M G55 andfully hot dip galvanized to ASTM A153.
Catalog No.: ELG-1830’-0”
15’-0”
10’-0”
Ordering GuideCast Base Example: ISBELG-18-CB (Cast Iron Slip Base Elgin-18” Dia. Base-Finish Classic Black)
Material Base: Base Configuration:_____ I Cast Iron_____ D Cast Ductile Iron _____SB Slip Base ELG-18-(coatings see below)_____ A Cast Aluminum
Column Example: SSH2F-G11-7.50-30-TN2.88/3.00-130/2NW-CB (SteelShaft 12 Flute-11 Gauge-7.50 Shaft Dia.-30’ Ht.-Tenon 2 7/8” Dia. x 3” Ht.-1”x 30” Anchor Bolts / 2 Nuts & Washers per anchor bolt-Finish Classic Black)
Material Column:_____ SSH Steel Shaft _____ ASH Aluminum Shaft
Column Configuration:_____SS Smooth Straight _____ST Smooth Tapered_____8S 8 Sharp Flute _____E3 3.5” Fluted Aluminum_____2F 12 Flat Flute _____E5 5.0” Fluted Aluminum _____6S 16 Sharp Flute _____H5 5.0” Fluted Heavy Wall Aluminum_____OC Octagonal _____E8 8.0” Fluted Aluminum
Column Thickness-Shaft Diameter at Grade-Height (max ht. 30’-0”):_____G11 11 Gauge-7.5-____- _____SC4 Schedule 40-X.X-____ -_____G17 7 Gauge- 7.5-____- _____SC8 Schedule 80-X.X-____-_____G24 3 Gauge- 7.5-____-_____A12 .125”thk alum.-6.75-____- _____A18 .188”thk alum.-6.75-____-_____A20 .200”thk alum.-6.75-____- _____A25 .250”thk alum.-6.75-____-
Post Top Tenon:_____ TN2.88/2.50- 2 7/8” Dia.. x 2 1/2” Ht._____ TN2.88/3.00- 2 7/8” Dia.. x 3” Ht._____ TN3.50/3.00- 3 1/2” Dia.. x 3” H_____ TNXX/XX- Other, please specify: ________” Dia.. x ________” Ht.
Accessories: (See Accessorie Section)
Anchor Bolts:_____ 323/ 3/4” x 24” _____ 124/ 1” x 24” _____ 136/ 1” x 36”_____ 330/ 3/4” x 30” _____ 130/ 1” x 30” _____ 140/ 1” x 40”_____ XXX/ Other _____ 999/ Not required_____ 1NW- 1Nut & Washer / Bolt _____ 2NW- 2 Nuts & Washers / Bolt
Coatings (Paint Finish - For detailed information, see Finish in the Specification Section):_____ PO Prime Paint _____ CB Finish Classic Black_____ BG Finish Bottle Green _____ DB Finish Dark Bronze_____ LB Finish Long Beach Blue _____ GI Finish Grey Iron_____ VG Finish Verde Green _____ CW Finish Custom Wet_____ CU Finish Custom Powder Coat _____ XX Other_____ GV Galvanized _____ UF Unfinished
Elgin - Bi-Metal cast base and fabricated col-umn.
SPRING CITY ELECTRICAL MFG. CO., INC.Hall & Main Streets, P. O. Box 19Spring City, PA 19475-0019Phone: 610-948-4000 Fax: 610-948-5577Website: www.springci ty.com
Page: BP 24
6”, 7” or 9”Dia. as deter-mined by col-umn diam.
Max. ht.30’-0”
7” Dia.
AccessDoor
18” Dia.
18” Diameter
8” Dia. Clear Opening
12” Diameter Bolt Circle
CL of Hand Hole and Access Door
2’-3
”
SPRING CITY ELECTRICAL MFG. CO., INHall & Main Streets, P. O. Box 19Spring City, PA 19475-0019Phone: 610-948-4000 Fax: 610-948-5577Website: www.springci ty.com
Page: BP 25
Elgin Bi-Metal Post24” One Piece Slip Base
S p e c i f i c a t i o n
Description
The Elgin Bi-Metal post consists of a cast base usecombination with a fabricated column. The fabriccolumn slips into the cast base and the two piecesmechanically attached. The assembly is then mountethe foundation at grade.
Post Material
The base is a heavy wall metal casting available in giron per ASTM A48, ductile Iron per ASTM A536 aluminum per ASTM B26-95 Alloy SR356. The fabried column is tapered at 0.14” per foot and is availablvariable heights. The column can be supplied eismooth or with vertical flutes in patterns of 8 sharp, 12and 16 sharp. Steel columns are available in 11 angauge as standard with other wall thicknesses availupon request. Aluminum column wall thickness rafrom 0.125” to 0.25” with other thicknesses availupon request or as determined by application. For mordepth information on materials, please refer to Materiathe Accessories Section.
Dimensions
Available post heights range from 10’ to 30’ in incremas small as 1”. The cast base has a round cross secwith a base diameter of 24”. The fabricated shaft hstop ring and internal base plate, both used in securingconnection of the base and column. The base has an igrally cast base flange with four slotted openingsanchor bolts and offers a standard bolt circle of Other bolt circles are available upon request. Tenon is variable and based upon application.
Installation
A single access door is located in the base to provaccess to the anchor bolts for wiring as well as accessity to the mechanical attachment of the column tobase. Opposite the access door opening inside the basa 1/4-20 nut provisions for a ground lug, by othAnchor bolts supplied are per ASTM A36M G55 andfully hot dip galvanized to ASTM A153.
Catalog No.: ELG-2430’-0”
20’-0”
10’-0”
Ordering GuideCast Base Example: ISBELG-24-CB (Cast Iron Slip Base Elgin-24” Dia. Base-Finish Classic Black)
Material Base: Base Configuration:_____ I Cast Iron_____ D Cast Ductile Iron _____SB Slip Base ELG-24-(coatings see below)_____ A Cast Aluminum
Column Example: SSH2F-G11-7.50-30-TN2.88/3.00-130/2NW-CB (SteelShaft 12 Flute-11 Gauge-7.50 Shaft Dia.-30’ Ht.-Tenon 2 7/8” Dia. x 3” Ht.-1”x 30” Anchor Bolts / 2 Nuts & Washers per anchor bolt-Finish Classic Black)
Material Column:_____ SSH Steel Shaft _____ ASH Aluminum Shaft
Column Configuration:_____SS Smooth Straight _____ST Smooth Tapered_____8S 8 Sharp Flute _____E3 3.5” Fluted Aluminum_____2F 12 Flat Flute _____E5 5.0” Fluted Aluminum _____6S 16 Sharp Flute _____H5 5.0” Fluted Heavy Wall Aluminum_____OC Octagonal _____E8 8.0” Fluted Aluminum
Column Thickness-Shaft Diameter at Grade-Height (max ht. 30’-0”):_____G11 11 Gauge-7.5-____- _____SC4 Schedule 40-X.X-____ -_____G17 7 Gauge- 7.5-____- _____SC8 Schedule 80-X.X-____-_____G24 3 Gauge- 7.5-____-_____A12 .125”thk alum.-6.75-____- _____A18 .188”thk alum.-6.75-____-_____A20 .200”thk alum.-6.75-____- _____A25 .250”thk alum.-6.75-____-
Post Top Tenon:_____ TN2.88/2.50- 2 7/8” Dia.. x 2 1/2” Ht._____ TN2.88/3.00- 2 7/8” Dia.. x 3” Ht._____ TN3.50/3.00- 3 1/2” Dia.. x 3” H_____ TNXX/XX- Other, please specify: ________” Dia.. x ________” Ht.
Accessories: (See Accessorie Section)
Anchor Bolts:_____ 323/ 3/4” x 24” _____ 124/ 1” x 24” _____ 136/ 1” x 36”_____ 330/ 3/4” x 30” _____ 130/ 1” x 30” _____ 140/ 1” x 40”_____ XXX/ Other _____ 999/ Not required_____ 1NW- 1Nut & Washer / Bolt _____ 2NW- 2 Nuts & Washers / Bolt
Coatings (Paint Finish - For detailed information, see Finish in the Specification Section):_____ PO Prime Paint _____ CB Finish Classic Black_____ BG Finish Bottle Green _____ DB Finish Dark Bronze_____ LB Finish Long Beach Blue _____ GI Finish Grey Iron_____ VG Finish Verde Green _____ CW Finish Custom Wet_____ CU Finish Custom Powder Coat _____ XX Other_____ GV Galvanized _____ UF Unfinished
Elgin - Bi-Metal cast base and fabricated col-umn.
SPRING CITY ELECTRICAL MFG. CO., INC.Hall & Main Streets, P. O. Box 19Spring City, PA 19475-0019Phone: 610-948-4000 Fax: 610-948-5577Website: www.springci ty.com
Page: BP 26
6”, 7” or 9”Dia. as deter-mined by col-umn diam.
Max. ht.30’-0”
7” Dia.
AccessDoor
24” Dia.
24” Diameter
8” Dia. Clear Opening
12” Diameter Bolt Circle
CL of Hand Hole and Access Door
2’-5
”
SPRING CITY ELECTRICAL MFG. CO., INHall & Main Streets, P. O. Box 19Spring City, PA 19475-0019Phone: 610-948-4000 Fax: 610-948-5577Website: www.springci ty.com
Page: BP 27
Capistrano Bi-Metal Post19” One Piece Slip Base
S p e c i f i c a t i o n
Description
The Capistrano Bi-Metal post consists of a cast base uin combination with a fabricated column. The fabriccolumn mounts to the foundation at grade and carriesstructural load. The cast base serves both a decorativeprotective function.
Post Material
The base is a heavy wall metal casting available in minum per ASTM B26-95 Alloy SR356. The fabriccolumn is tapered at 0.14” per foot and is available in vable heights. The column can be supplied either smoor with vertical flutes in patterns of 8 sharp, 12 flat andsharp. Steel columns are available in 11 and 7 gaugstandard with other wall thicknesses available urequest. Aluminum column wall thickness range f0.125” to 0.25” with other thicknesses available urequest or as determined by application. For mordepth information on materials, please refer to Materiathe Accessories Section.
Dimensions
Available post heights range from 10’ to 22’ in incremas small as 1”. The cast base has a round cross secwith a base diameter of 19”. The fabricated shaft hbase plate with four slotted openings for anchor bolts offers a standard bolt circle of 12”. Other bolt circlesavailable upon request. Tenon size is variable and baupon application.
Installation
A single access door is located in the base to provaccess to the anchor bolts. The door in the base coincwith the hand hole opening in the column for wiaccess. Opposite the hand hole opening inside the coluare a 1/4-20 nut provisions for a ground lug, by othAnchor bolts supplied are per ASTM A36M G55 andfully hot dip galvanized to ASTM A153.
Catalog No.: CPS-1922’-0”
16’-0”
10’-0”
Ordering GuideCast Base Example: ISBCPS-19-CB (Cast Iron Slip Base Capistrano-19” Dia.Base-Finish Classic Black)
Material Base: Base Configuration:_____ I Cast Iron_____ D Cast Ductile Iron _____SB Slip Base CPS-19-(coatings see below)_____ A Cast Aluminum
Column Example: SSH8S-G11-6.50-22-TN2.88/3.00-130/2NW-CB (SteelShaft 8 Flute-11 Gauge-6.50 Shaft Dia.-22’ Ht.-Tenon 2 7/8” Dia. x 3” Ht.-1” x30” Anchor Bolts / 2 Nuts & Washers per anchor bolt-Finish Classic Black)
Material Column:_____ SSH Steel Shaft _____ ASH Aluminum Shaft
Column Configuration:_____SS Smooth Straight _____ST Smooth Tapered_____8S 8 Sharp Flute _____E3 3.5” Fluted Aluminum_____2F 12 Flat Flute _____E5 5.0” Fluted Aluminum _____6S 16 Sharp Flute _____H5 5.0” Fluted Heavy Wall Aluminum_____OC Octagonal _____E8 8.0” Fluted Aluminum
Column Thickness-Shaft Diameter at Grade-Height (max ht. 22’-0”):_____G11 11 Gauge-6.5-____- _____SC4 Schedule 40-X.X-____ -_____G17 7 Gauge- 6.5-____- _____SC8 Schedule 80-X.X-____-_____G24 3 Gauge- 6.5-____-_____A12 .125”thk alum.-6.75-____- _____A18 .188”thk alum.-6.75-____-_____A20 .200”thk alum.-6.75-____- _____A25 .250”thk alum.-6.75-____-
Post Top Tenon:_____ TN2.88/2.50- 2 7/8” Dia.. x 2 1/2” Ht._____ TN2.88/3.00- 2 7/8” Dia.. x 3” Ht._____ TN3.50/3.00- 3 1/2” Dia.. x 3” H_____ TNXX/XX- Other, please specify: ________” Dia.. x ________” Ht.
Accessories: (See Accessorie Section)
Anchor Bolts:_____ 323/ 3/4” x 24” _____ 124/ 1” x 24” _____ 136/ 1” x 36”_____ 330/ 3/4” x 30” _____ 130/ 1” x 30” _____ 140/ 1” x 40”_____ XXX/ Other _____ 999/ Not required_____ 1NW- 1Nut & Washer / Bolt _____ 2NW- 2 Nuts & Washers / Bolt
Coatings (Paint Finish - For detailed information, see Finish in the Specification Section):_____ PO Prime Paint _____ CB Finish Classic Black_____ BG Finish Bottle Green _____ DB Finish Dark Bronze_____ LB Finish Long Beach Blue _____ GI Finish Grey Iron_____ VG Finish Verde Green _____ CW Finish Custom Wet_____ CU Finish Custom Powder Coat _____ XX Other_____ GV Galvanized _____ UF Unfinished
Capistrano - Bi-Metal cast base and fabricat-ed column. One piece version of this styleavailable, see the Lighting Post - Cast Section
SPRING CITY ELECTRICAL MFG. CO., INC.Hall & Main Streets, P. O. Box 19Spring City, PA 19475-0019Phone: 610-948-4000 Fax: 610-948-5577Website: www.springci ty.com
Page: BP 28
6”, 7” or 9”Dia. as deter-mined by col-umn diam.
Max. ht.22’-0”
6 1/4” Dia.
Access Door
19” Dia.
19” Diameter
11 3/4”
(4) Slotted openings to accommodateanchor bolts
6 1/2” O. D. of Steel Shaft
12” Diameter Bolt Circle
CL of Hand Hole and Access Door
1’-6
1/2
”
SPRING CITY ELECTRICAL MFG. CO., INHall & Main Streets, P. O. Box 19Spring City, PA 19475-0019Phone: 610-948-4000 Fax: 610-948-5577Website: www.springci ty.com
Page: BP 29
Regency Capistrano Bi-Metal Post22” One Piece Slip Base
S p e c i f i c a t i o n
Description
The Regency Capistrano Bi-Metal post consists of a base used in combination with a fabricated column. fabricated column mounts to the foundation at grade carries the structural load. The cast base serves bodecorative and protective function.
Post Material
The base is a heavy wall metal casting available in minum per ASTM B26-95 Alloy SR356. The fabriccolumn is tapered at 0.14” per foot and is available in vable heights. The column can be supplied either smoor with vertical flutes in patterns of 8 sharp, 12 flat andsharp. Steel columns are available in 11 and 7 gaugstandard with other wall thicknesses available urequest. Aluminum column wall thickness range f0.125” to 0.25” with other thicknesses available urequest or as determined by application. For mordepth information on materials, please refer to Materiathe Accessories Section.
Dimensions
Available post heights range from 10’ to 22’ in incremas small as 1”. The cast base has an octagonal cross tion with a base dimension of 22”. The fabricated shas a base plate with four slotted openings for anchor band offers a standard bolt circle of 12”. Other bolt cirare available upon request. Tenon size is variable based upon application.
Installation
A single access door is located in the base to provaccess to the anchor bolts. The door in the base coincwith the hand hole opening in the column for wiaccess. Opposite the hand hole opening inside the coluare a 1/4-20 nut provisions for a ground lug, by othAnchor bolts supplied are per ASTM A36M G55 andfully hot dip galvanized to ASTM A153.
Catalog No.: RGC-2222’-0”
12’-0”
10’-0”
Ordering GuideCast Base Example: ISBRGC-22-CB (Cast Iron Slip Base RegencyCapistrano-22” Oct. Base-Finish Classic Black)
Material Base: Base Configuration:_____ I Cast Iron_____ D Cast Ductile Iron _____SB Slip Base RGC-22-(coatings see below)_____ A Cast Aluminum
Column Example: SSH8S-G11-6.50-22-TN2.88/3.00-130/2NW-CB (SteelShaft 8 Flute-11 Gauge-6.50 Shaft Dia.-22’ Ht.-Tenon 2 7/8” Dia. x 3” Ht.-1” x30” Anchor Bolts / 2 Nuts & Washers per anchor bolt-Finish Classic Black)
Material Column:_____ SSH Steel Shaft _____ ASH Aluminum Shaft
Column Configuration:_____SS Smooth Straight _____ST Smooth Tapered_____8S 8 Sharp Flute _____E3 3.5” Fluted Aluminum_____2F 12 Flat Flute _____E5 5.0” Fluted Aluminum _____6S 16 Sharp Flute _____H5 5.0” Fluted Heavy Wall Aluminum_____OC Octagonal _____E8 8.0” Fluted Aluminum
Column Thickness-Shaft Diameter at Grade-Height (max ht. 22’-0”):_____G11 11 Gauge-6.5-____- _____SC4 Schedule 40-X.X-____ -_____G17 7 Gauge- 6.5-____- _____SC8 Schedule 80-X.X-____-_____G24 3 Gauge- 6.5-____-_____A12 .125”thk alum.-6.75-____- _____A18 .188”thk alum.-6.75-____-_____A20 .200”thk alum.-6.75-____- _____A25 .250”thk alum.-6.75-____-
Post Top Tenon:_____ TN2.88/2.50- 2 7/8” Dia.. x 2 1/2” Ht._____ TN2.88/3.00- 2 7/8” Dia.. x 3” Ht._____ TN3.50/3.00- 3 1/2” Dia.. x 3” H_____ TNXX/XX- Other, please specify: ________” Dia.. x ________” Ht.
Accessories: (See Accessorie Section)
Anchor Bolts:_____ 323/ 3/4” x 24” _____ 124/ 1” x 24” _____ 136/ 1” x 36”_____ 330/ 3/4” x 30” _____ 130/ 1” x 30” _____ 140/ 1” x 40”_____ XXX/ Other _____ 999/ Not required_____ 1NW- 1Nut & Washer / Bolt _____ 2NW- 2 Nuts & Washers / Bolt
Coatings (Paint Finish - For detailed information, see Finish in the Specification Section):_____ PO Prime Paint _____ CB Finish Classic Black_____ BG Finish Bottle Green _____ DB Finish Dark Bronze_____ LB Finish Long Beach Blue _____ GI Finish Grey Iron_____ VG Finish Verde Green _____ CW Finish Custom Wet_____ CU Finish Custom Powder Coat _____ XX Other_____ GV Galvanized _____ UF Unfinished
Regency Capistrano - Bi-Metal cast base andfabricated column. One piece version of thisstyle available, see the Lighting Post - CastSection
SPRING CITY ELECTRICAL MFG. CO., INC.Hall & Main Streets, P. O. Box 19Spring City, PA 19475-0019Phone: 610-948-4000 Fax: 610-948-5577Website: www.springci ty.com
Page: BP 30
6 1/4” Dia.
AccessDoor
22” Oct.
Max. ht.22’-0”
6”, 7” or 9”Dia. as deter-mined by col-umn diam.
22” Octagonal
11 3/4”
(4) Slotted openings to accommodateanchor bolts
6 1/2” O. D. of Steel Shaft
12” Diameter Bolt Circle
CL of Hand Hole and Access Door
2’-1
”
SPRING CITY ELECTRICAL MFG. CO., INHall & Main Streets, P. O. Box 19Spring City, PA 19475-0019Phone: 610-948-4000 Fax: 610-948-5577Website: www.springci ty.com
Page: BP 31
Catalog No.: MDS-19
Madison Bi-Metal Post18 1/2” One Piece Slip Base
S p e c i f i c a t i o n
Description
The Madison Bi-Metal post consists of a cast base usecombination with a fabricated column. The fabriccolumn mounts to the foundation at grade and carriesstructural load. The cast base serves both a decorativeprotective function.
Post Material
The base is a heavy wall metal casting available in giron per ASTM A48, ductile Iron per ASTM A536 aluminum per ASTM B26-95 Alloy SR356. The fabried column is tapered at 0.14” per foot and is availablvariable heights. The column can be supplied eismooth or with vertical flutes in patterns of 8 sharp, 12and 16 sharp. Steel columns are available in 11 angauge as standard with other wall thicknesses availupon request. Aluminum column wall thickness rafrom 0.125” to 0.25” with other thicknesses availupon request or as determined by application. For mordepth information on materials, please refer to Materiathe Accessories Section.
Dimensions
Available post heights range from 10’ to 15’-0” in inments as small as 1”. The cast base has a round cross tion with a base diameter of 18 1/2”. The fabricated shas a base plate with four slotted openings for anchor band offers a standard bolt circle of 12”. Other bolt cirare available upon request. Tenon size is variable based upon application.
Installation
A single access door is located in the base to provaccess to the anchor bolts. The door in the base coincwith the hand hole opening in the column for wiaccess. Opposite the hand hole opening inside the coluare a 1/4-20 nut provisions for a ground lug, by othAnchor bolts supplied are per ASTM A36M G55 andfully hot dip galvanized to ASTM A153.
15’-0”
12’-0”
10’-0”
Ordering GuideCast Base Example: ISBMDS-18.5-CB (Cast Iron Slip Base Madison-18.5”Dia. Base-Finish Classic Black)
Material Base: Base Configuration:_____ I Cast Iron_____ D Cast Ductile Iron _____SB Slip Base MDS-18.5-(coatings see below)_____ A Cast Aluminum
Column Example: SSH2F-G11-5.50-15-TN2.88/3.00-MF-130/2NW-CB (Steel Shaft12 Flute-11 Gauge-5.50 Shaft Dia.-15’ Ht.-Tenon 2 7/8” Dia. x 3” Ht.-Madison FlareTop-1” x 30” Anchor Bolts / 2 Nuts & Washers per anchor bolt-Finish Classic Black)
Material Column:_____ SSH Steel Shaft _____ ASH Aluminum Shaft
Column Configuration:_____SS Smooth Straight _____ST Smooth Tapered_____8S 8 Sharp Flute _____E3 3.5” Fluted Aluminum_____2F 12 Flat Flute _____E5 5.0” Fluted Aluminum _____6S 16 Sharp Flute _____H5 5.0” Fluted Heavy Wall Aluminum_____OC Octagonal _____E8 8.0” Fluted Aluminum
Column Thickness-Shaft Diameter at Grade-Height (max ht. 15’-0”):_____G11 11 Gauge-5.5-____- _____SC4 Schedule 40-X.X-____ -_____G17 7 Gauge- 5.5-____- _____SC8 Schedule 80-X.X-____-_____G24 3 Gauge- 5.5-____-_____A12 .125”thk alum.-6.75-____- _____A18 .188”thk alum.-6.75-____-_____A20 .200”thk alum.-6.75-____- _____A25 .250”thk alum.-6.75-____-
Post Top Tenon:_____ TN2.88/2.50- 2 7/8” Dia.. x 2 1/2” Ht._____ TN2.88/3.00- 2 7/8” Dia.. x 3” Ht._____ TN3.50/3.00- 3 1/2” Dia.. x 3” H_____ TNXX/XX- Other, please specify: ________” Dia.. x ________” Ht.
Accessories: (See Accessorie Section)
Anchor Bolts:_____ 323/ 3/4” x 24” _____ 124/ 1” x 24” _____ 136/ 1” x 36”_____ 330/ 3/4” x 30” _____ 130/ 1” x 30” _____ 140/ 1” x 40”_____ XXX/ Other _____ 999/ Not required_____ 1NW- 1Nut & Washer / Bolt _____ 2NW- 2 Nuts & Washers / Bolt
Coatings (Paint Finish - For detailed information, see Finish in the Specification Section):_____ PO Prime Paint _____ CB Finish Classic Black_____ BG Finish Bottle Green _____ DB Finish Dark Bronze_____ LB Finish Long Beach Blue _____ GI Finish Grey Iron_____ VG Finish Verde Green _____ CW Finish Custom Wet_____ CU Finish Custom Powder Coat _____ XX Other_____ GV Galvanized _____ UF Unfinished
Madison - Bi-Metal cast base and fabricatedcolumn. One piece all cast material version ofthis style available, see the Lighting Post - CastSection
SPRING CITY ELECTRICAL MFG. CO., INC.Hall & Main Streets, P. O. Box 19Spring City, PA 19475-0019Phone: 610-948-4000 Fax: 610-948-5577Website: www.springci ty.com
Page: BP 32
Max. ht.15’-0”
AccessDoor
18 1/2” Dia.
5” Dia.
18 1/2”Diameter
11 3/4”(4) Slotted openings to accommodateanchor bolts
5 1/2” O. D. of Steel Shaft
12” Diameter Bolt Circle
CL of Hand Hole and Access Door
6 7/8” Dia.
4’-3”
SPRING CITY ELECTRICAL MFG. CO., INHall & Main Streets, P. O. Box 19Spring City, PA 19475-0019Phone: 610-948-4000 Fax: 610-948-5577Website: www.springci ty.com
Page: BP 33
Catalog No.: MDS-20
Madison Bi-Metal Post20” One Piece Slip or Two Piece Wrap Base
S p e c i f i c a t i o n
Description
The Madison Bi-Metal post consists of a cast base usecombination with a fabricated column. The fabriccolumn mounts to the foundation at grade and carriesstructural load. The cast base serves both a decorativeprotective function.
Post Material
The base is a heavy wall metal casting available in giron per ASTM A48, ductile Iron per ASTM A536 aluminum per ASTM B26-95 Alloy SR356. The fabried column is tapered at 0.14” per foot and is availablvariable heights. The column can be supplied eismooth or with vertical flutes in patterns of 8 sharp, 12and 16 sharp. Steel columns are available in 11 angauge as standard with other wall thicknesses availupon request. Aluminum column wall thickness rafrom 0.125” to 0.25” with other thicknesses availupon request or as determined by application. For mordepth information on materials, please refer to Materiathe Accessories Section.
Dimensions
Available post heights range from 10’ to 30’ in incremas small as 1”. The cast base has a round cross secwith a base diameter of 20”. The fabricated shaft hbase plate with four slotted openings for anchor bolts offers a standard bolt circle of 12”. Other bolt circlesavailable upon request. Tenon size is variable and baupon application.
Installation
A single access door is located in the base to provaccess to the anchor bolts. The door in the base coincwith the hand hole opening in the column for wiaccess. Opposite the hand hole opening inside the coluare a 1/4-20 nut provisions for a ground lug, by othAnchor bolts supplied are per ASTM A36M G55 andfully hot dip galvanized to ASTM A153.
30’-0”
20’-0”
10’-0”
Ordering GuideCast Base Example: ISBMDS-20-CB (Cast Iron Slip Base Madison-20” Dia.Base-Finish Classic Black)
Material Base: Base Configuration:_____ I Cast Iron _____SB Slip Base MDS-20-(coatings see below)_____ D Cast Ductile Iron _____WB Wrap Base MDS-20-(coatings see below)_____ A Cast Aluminum
Column Example: SSH8S-G11-7.50-30-TN2.88/3.00-130/2NW-CB (SteelShaft 8 Flute-11 Gauge-7.50 Shaft Dia.-30’ Ht.-Tenon 2 7/8” Dia. x 3” Ht.-1” x30” Anchor Bolts / 2 Nuts & Washers per anchor bolt-Finish Classic Black)
Material Column:_____ SSH Steel Shaft _____ ASH Aluminum Shaft
Column Configuration:_____SS Smooth Straight _____ST Smooth Tapered_____8S 8 Sharp Flute _____E3 3.5” Fluted Aluminum_____2F 12 Flat Flute _____E5 5.0” Fluted Aluminum _____6S 16 Sharp Flute _____H5 5.0” Fluted Heavy Wall Aluminum_____OC Octagonal _____E8 8.0” Fluted Aluminum
Column Thickness-Shaft Diameter at Grade-Height (max ht. 30’-0”):_____G11 11 Gauge-7.5-____- _____SC4 Schedule 40-X.X-____ -_____G17 7 Gauge- 7.5-____- _____SC8 Schedule 80-X.X-____-_____G24 3 Gauge- 7.5-____-_____A12 .125”thk alum.-6.75-____- _____A18 .188”thk alum.-6.75-____-_____A20 .200”thk alum.-6.75-____- _____A25 .250”thk alum.-6.75-____-
Post Top Tenon:_____ TN2.88/2.50- 2 7/8” Dia.. x 2 1/2” Ht._____ TN2.88/3.00- 2 7/8” Dia.. x 3” Ht._____ TN3.50/3.00- 3 1/2” Dia.. x 3” H_____ TNXX/XX- Other, please specify: ________” Dia.. x ________” Ht.
Accessories: (See Accessorie Section)
Anchor Bolts:_____ 323/ 3/4” x 24” _____ 124/ 1” x 24” _____ 136/ 1” x 36”_____ 330/ 3/4” x 30” _____ 130/ 1” x 30” _____ 140/ 1” x 40”_____ XXX/ Other _____ 999/ Not required_____ 1NW- 1Nut & Washer / Bolt _____ 2NW- 2 Nuts & Washers / Bolt
Coatings (Paint Finish - For detailed information, see Finish in the Specification Section):_____ PO Prime Paint _____ CB Finish Classic Black_____ BG Finish Bottle Green _____ DB Finish Dark Bronze_____ LB Finish Long Beach Blue _____ GI Finish Grey Iron_____ VG Finish Verde Green _____ CW Finish Custom Wet_____ CU Finish Custom Powder Coat _____ XX Other_____ GV Galvanized _____ UF Unfinished
Madison - Bi-Metal cast base and fabricatedcolumn. One piece all cast material version ofthis style available, see the Lighting Post - CastSection
SPRING CITY ELECTRICAL MFG. CO., INC.Hall & Main Streets, P. O. Box 19Spring City, PA 19475-0019Phone: 610-948-4000 Fax: 610-948-5577Website: www.springci ty.com
Page: BP 34
6”, 7” or 9”Dia. as deter-mined bycolumn diam.
Max. ht.30’-0”
7” Dia.
AccessDoor
20” Dia.
20” Diameter
11 3/4”(4) Slotted openings to accommodateanchor bolts
7 1/2” O. D. of Steel Shaft
12” Diameter Bolt Circle
CL of Hand Hole and Access Door
4’-3”
SPRING CITY ELECTRICAL MFG. CO., INHall & Main Streets, P. O. Box 19Spring City, PA 19475-0019Phone: 610-948-4000 Fax: 610-948-5577Website: www.springci ty.com
Page: BP 35
Catalog No.: EDG-20
Edgewater Bi-Metal Post20” Two Piece Wrap Base
S p e c i f i c a t i o n
Description
The Edgewater Bi-Metal post consists of a cast base uin combination with a fabricated column. The fabriccolumn mounts to the foundation at grade and carriesstructural load. The cast base serves both a decorativeprotective function.
Post Material
The base is a heavy wall metal casting available in giron per ASTM A48, ductile Iron per ASTM A536 aluminum per ASTM B26-95 Alloy SR356. The fabried column is tapered at 0.14” per foot and is availablvariable heights. The column can be supplied eismooth or with vertical flutes in patterns of 8 sharpflat, 16 sharp and 8 sided. Steel columns are availabl11 and 7 gauge as standard with other wall thickneavailable upon request. Aluminum column wall thicknrange from 0.125” to 0.25” with other thicknesses avable upon request or as determined by application. more in depth information on materials, please refeMaterial in the Accessories Section.
Dimensions
Available post heights range from 10’ to 30’ in incremas small as 1”. The cast base has an octagonal cross tion with a base dimension of 20”. The fabricated shas a base plate with four slotted openings for anchor band offers a standard bolt circle of 12”. Other bolt cirare available upon request. Tenon size is variable based upon application.
Installation
A single access door is located in the base to provaccess to the anchor bolts. The door in the base coincwith the hand hole opening in the column for wiaccess. Opposite the hand hole opening inside the coluare a 1/4-20 nut provisions for a ground lug, by othAnchor bolts supplied are per ASTM A36M G55 andfully hot dip galvanized to ASTM A153.
30’-0”
20’-0”
10’-0”
Ordering GuideCast Base Example: IWBEDG-20-CB (Cast Iron Wrap Base Edgewater-20”Oct. Base-Finish Classic Black)
Material Base: Base Configuration:_____ I Cast Iron_____ D Cast Ductile Iron _____WB Wrap Base EDG-20-(coatings see below)_____ A Cast Aluminum
Column Example: SSH2F-G11-8.50-30-TN2.88/3.00-130/2NW-CB (SteelShaft 12 Flute-11 Gauge-8.50 Shaft Dia.-30’ Ht.-Tenon 2 7/8” Dia. x 3” Ht.-1”x 30” Anchor Bolts / 2 Nuts & Washers per anchor bolt-Finish Classic Black)
Material Column:_____ SSH Steel Shaft _____ ASH Aluminum Shaft
Column Configuration:_____SS Smooth Straight _____ST Smooth Tapered_____8S 8 Sharp Flute _____E3 3.5” Fluted Aluminum_____2F 12 Flat Flute _____E5 5.0” Fluted Aluminum _____6S 16 Sharp Flute _____H5 5.0” Fluted Heavy Wall Aluminum_____OC Octagonal _____E8 8.0” Fluted Aluminum
Column Thickness-Shaft Diameter at Grade-Height (max ht. 30’-0”):_____G11 11 Gauge-8.5-____- _____SC4 Schedule 40-X.X-____ -_____G17 7 Gauge- 8.5____- _____SC8 Schedule 80-X.X-____-_____G24 3 Gauge- 8.5-____-_____A12 .125”thk alum.-6.75-____- _____A18 .188”thk alum.-6.75-____-_____A20 .200”thk alum.-6.75-____- _____A25 .250”thk alum.-6.75-____-
Post Top Tenon:_____ TN2.88/2.50- 2 7/8” Dia.. x 2 1/2” Ht._____ TN2.88/3.00- 2 7/8” Dia.. x 3” Ht._____ TN3.50/3.00- 3 1/2” Dia.. x 3” H_____ TNXX/XX- Other, please specify: ________” Dia.. x ________” Ht.
Accessories: (See Accessorie Section)
Anchor Bolts:_____ 323/ 3/4” x 24” _____ 124/ 1” x 24” _____ 136/ 1” x 36”_____ 330/ 3/4” x 30” _____ 130/ 1” x 30” _____ 140/ 1” x 40”_____ XXX/ Other _____ 999/ Not required_____ 1NW- 1Nut & Washer / Bolt _____ 2NW- 2 Nuts & Washers / Bolt
Coatings (Paint Finish - For detailed information, see Finish in the Specification Section):_____ PO Prime Paint _____ CB Finish Classic Black_____ BG Finish Bottle Green _____ DB Finish Dark Bronze_____ LB Finish Long Beach Blue _____ GI Finish Grey Iron_____ VG Finish Verde Green _____ CW Finish Custom Wet_____ CU Finish Custom Powder Coat _____ XX Other_____ GV Galvanized _____ UF Unfinished
Edgewater - Bi-Metal cast base and fabricatedcolumn. One piece all cast material version ofthis style available, see the Lighting Post - CastSection
SPRING CITY ELECTRICAL MFG. CO., INC.Hall & Main Streets, P. O. Box 19Spring City, PA 19475-0019Phone: 610-948-4000 Fax: 610-948-5577Website: www.springci ty.com
Page: BP 36
9” Oct.
Max. ht.30’-0”
AccessDoor
7 7/8” Oct.
20” Oct.
20” Octagonal
13 1/4”
(4) Slotted openings to accommodateanchor bolts
8 1/2” O. D. of Steel Shaft
12” Diameter Bolt CircleCL of Hand Hole and Access Door
1’-9
3/4
”
SPRING CITY ELECTRICAL MFG. CO., INHall & Main Streets, P. O. Box 19Spring City, PA 19475-0019Phone: 610-948-4000 Fax: 610-948-5577Website: www.springci ty.com
Page: BP 37
Catalog No.: HNC-16
Hancock Bi-Metal Post16” One Piece Slip Base
S p e c i f i c a t i o n
Description
The Hancock Bi-Metal post consists of a cast base usecombination with a fabricated column. The fabriccolumn mounts to the foundation at grade and carriesstructural load. The cast base serves both a decorativeprotective function.
Post Material
The base is a heavy wall metal casting available in giron per ASTM A48, ductile Iron per ASTM A536 aluminum per ASTM B26-95 Alloy SR356. The fabried column is tapered at 0.14” per foot and is availablvariable heights. The column can be supplied eismooth or with vertical flutes in patterns of 8 sharp, 12and 16 sharp. Steel columns are available in 11 angauge as standard with other wall thicknesses availupon request. Aluminum column wall thickness rafrom 0.125” to 0.25” with other thicknesses availupon request or as determined by application. For mordepth information on materials, please refer to Materiathe Accessories Section.
Dimensions
Available post heights range from 10’ to 16’ in incremas small as 1”. The cast base has a round cross secwith a base diameter of 16”. The fabricated shaft hbase plate with four slotted openings for anchor bolts offers a standard bolt circle of 11”. Other bolt circlesavailable upon request. Tenon size is variable and baupon application.
Installation
A single access door is located in the base to provaccess to the anchor bolts. The door in the base coincwith the hand hole opening in the column for wiaccess. Opposite the hand hole opening inside the coluare a 1/4-20 nut provisions for a ground lug, by othAnchor bolts supplied are per ASTM A36M G55 andfully hot dip galvanized to ASTM A153.
16’-0”
13’-0”
10’-0”
Ordering GuideCast Base Example: ISBHNC-16-CB (Cast Iron Slip Base Hancock-16” Dia.Base-Finish Classic Black)
Material Base: Base Configuration:_____ I Cast Iron_____ D Cast Ductile Iron _____SB Slip Base HNC-16-(coatings see below)_____ A Cast Aluminum
Column Example: SSH2F-G11-5.60-16-TN2.88/3.00-LR-130/2NW-CB (Steel Shaft12 Flute-11 Gauge-5.60 Shaft Dia.-16’ Ht.-Tenon 2 7/8” Dia. x 3” Ht.-Ladder Rest-1” x30” Anchor Bolts / 2 Nuts & Washers per anchor bolt-Finish Classic Black)
Material Column:_____ SSH Steel Shaft _____ ASH Aluminum Shaft
Column Configuration:_____SS Smooth Straight _____ST Smooth Tapered_____8S 8 Sharp Flute _____E3 3.5” Fluted Aluminum_____2F 12 Flat Flute _____E5 5.0” Fluted Aluminum _____6S 16 Sharp Flute _____H5 5.0” Fluted Heavy Wall Aluminum_____OC Octagonal _____E8 8.0” Fluted Aluminum
Column Thickness-Shaft Diameter at Grade-Height (max ht. 16’-0”):_____G11 11 Gauge-5.6-____- _____SC4 Schedule 40-X.X-____ -_____G17 7 Gauge- 5.6-____- _____SC8 Schedule 80-X.X-____-_____G24 3 Gauge- 5.6-____-_____A12 .125”thk alum.-6.75-____- _____A18 .188”thk alum.-6.75-____-_____A20 .200”thk alum.-6.75-____- _____A25 .250”thk alum.-6.75-____-
Post Top Tenon:_____ TN2.88/2.50- 2 7/8” Dia.. x 2 1/2” Ht._____ TN2.88/3.00- 2 7/8” Dia.. x 3” Ht._____ TN3.50/3.00- 3 1/2” Dia.. x 3” H_____ TNXX/XX- Other, please specify: ________” Dia.. x ________” Ht.
Accessories: (See Accessorie Section)
Anchor Bolts:_____ 323/ 3/4” x 24” _____ 124/ 1” x 24” _____ 136/ 1” x 36”_____ 330/ 3/4” x 30” _____ 130/ 1” x 30” _____ 140/ 1” x 40”_____ XXX/ Other _____ 999/ Not required_____ 1NW- 1Nut & Washer / Bolt _____ 2NW- 2 Nuts & Washers / Bolt
Coatings (Paint Finish - For detailed information, see Finish in the Specification Section):_____ PO Prime Paint _____ CB Finish Classic Black_____ BG Finish Bottle Green _____ DB Finish Dark Bronze_____ LB Finish Long Beach Blue _____ GI Finish Grey Iron_____ VG Finish Verde Green _____ CW Finish Custom Wet_____ CU Finish Custom Powder Coat _____ XX Other_____ GV Galvanized _____ UF Unfinished
Hancock - Bi-Metal cast base and fabricatedcolumn. One piece all cast material version ofthis style available, see the Lighting Post - CastSection
SPRING CITY ELECTRICAL MFG. CO., INC.Hall & Main Streets, P. O. Box 19Spring City, PA 19475-0019Phone: 610-948-4000 Fax: 610-948-5577Website: www.springci ty.com
Page: BP 38
6”, 7” or 9”Dia. as deter-mined by col-umn diam.
Max. ht.16’-0”
5” Dia.
AccessDoor
16” Dia.
16” Diameter
11” (4) Slotted openings to accommodateanchor bolts
5.6” O. D. of Steel Shaft
11” Diameter Bolt Circle
CL of Hand Hole and Access Door
Ladder RestOptional
4’-3”
SPRING CITY ELECTRICAL MFG. CO., INHall & Main Streets, P. O. Box 19Spring City, PA 19475-0019Phone: 610-948-4000 Fax: 610-948-5577Website: www.springci ty.com
Page: BP 39
Catalog No.: HNC-20
Hancock Bi-Metal Post20” One Piece Slip or Two Piece Wrap Base
S p e c i f i c a t i o n
Description
The Hancock Bi-Metal post consists of a cast base usecombination with a fabricated column. The fabriccolumn mounts to the foundation at grade and carriesstructural load. The cast base serves both a decorativeprotective function.
Post Material
The base is a heavy wall metal casting available in giron per ASTM A48, ductile Iron per ASTM A536 aluminum per ASTM B26-95 Alloy SR356. The fabried column is tapered at 0.14” per foot and is availablvariable heights. The column can be supplied eismooth or with vertical flutes in patterns of 8 sharp, 12and 16 sharp. Steel columns are available in 11 angauge as standard with other wall thicknesses availupon request. Aluminum column wall thickness rafrom 0.125” to 0.25” with other thicknesses availupon request or as determined by application. For mordepth information on materials, please refer to Materiathe Accessories Section.
Dimensions
Available post heights range from 10’ to 30’ in incremas small as 1”. The cast base has a round cross secwith a base diameter of 20”. The fabricated shaft hbase plate with four slotted openings for anchor bolts offers a standard bolt circle of 12”. Other bolt circlesavailable upon request. Tenon size is variable and baupon application.
Installation
A single access door is located in the base to provaccess to the anchor bolts. The door in the base coincwith the hand hole opening in the column for wiaccess. Opposite the hand hole opening inside the coluare a 1/4-20 nut provisions for a ground lug, by othAnchor bolts supplied are per ASTM A36M G55 andfully hot dip galvanized to ASTM A153.
30’-0”
20’-0”
10’-0”
Ordering GuideCast Base Example: ISBHNC-20-CB (Cast Iron Slip Base Hancock-20” Dia.Base-Finish Classic Black)
Material Base: Base Configuration:_____ I Cast Iron _____SB Slip Base HNC-20-(coatings see below)_____ D Cast Ductile Iron _____WB Wrap Base HNC-20-(coatings see below)_____ A Cast Aluminum
Column Example: SSH2F-G11-7.50-30-TN2.88/3.00-LR-130/2NW-CB (Steel Shaft12 Flute-11 Gauge-7.50 Shaft Dia.-30’ Ht.-Tenon 2 7/8” Dia. x 3” Ht.-Ladder Rest-1” x30” Anchor Bolts / 2 Nuts & Washers per anchor bolt-Finish Classic Black)
Material Column:_____ SSH Steel Shaft _____ ASH Aluminum Shaft
Column Configuration:_____SS Smooth Straight _____ST Smooth Tapered_____8S 8 Sharp Flute _____E3 3.5” Fluted Aluminum_____2F 12 Flat Flute _____E5 5.0” Fluted Aluminum _____6S 16 Sharp Flute _____H5 5.0” Fluted Heavy Wall Aluminum_____OC Octagonal _____E8 8.0” Fluted Aluminum
Column Thickness-Shaft Diameter at Grade-Height (max ht. 30’-0”):_____G11 11 Gauge-7.5-____- _____SC4 Schedule 40-X.X-____ -_____G17 7 Gauge- 7.5-____- _____SC8 Schedule 80-X.X-____-_____G24 3 Gauge- 7.5-____-_____A12 .125”thk alum.-6.75-____- _____A18 .188”thk alum.-6.75-____-_____A20 .200”thk alum.-6.75-____- _____A25 .250”thk alum.-6.75-____-
Post Top Tenon:_____ TN2.88/2.50- 2 7/8” Dia.. x 2 1/2” Ht._____ TN2.88/3.00- 2 7/8” Dia.. x 3” Ht._____ TN3.50/3.00- 3 1/2” Dia.. x 3” H_____ TNXX/XX- Other, please specify: ________” Dia.. x ________” Ht.
Accessories: (See Accessorie Section)
Anchor Bolts:_____ 323/ 3/4” x 24” _____ 124/ 1” x 24” _____ 136/ 1” x 36”_____ 330/ 3/4” x 30” _____ 130/ 1” x 30” _____ 140/ 1” x 40”_____ XXX/ Other _____ 999/ Not required_____ 1NW- 1Nut & Washer / Bolt _____ 2NW- 2 Nuts & Washers / Bolt
Coatings (Paint Finish - For detailed information, see Finish in the Specification Section):_____ PO Prime Paint _____ CB Finish Classic Black_____ BG Finish Bottle Green _____ DB Finish Dark Bronze_____ LB Finish Long Beach Blue _____ GI Finish Grey Iron_____ VG Finish Verde Green _____ CW Finish Custom Wet_____ CU Finish Custom Powder Coat _____ XX Other_____ GV Galvanized _____ UF Unfinished
Hancock - Bi-Metal cast base and fabricatedcolumn. One piece all cast material version ofthis style available, see the Lighting Post - CastSection
SPRING CITY ELECTRICAL MFG. CO., INC.Hall & Main Streets, P. O. Box 19Spring City, PA 19475-0019Phone: 610-948-4000 Fax: 610-948-5577Website: www.springci ty.com
Page: BP 40
6”, 7” or 9”Dia. asdeterminedby columndiam.
7” Dia.
Max. ht.30’-0”
20” Dia.
20” Diameter
11 3/4” (4) Slotted openings to accommodateanchor bolts
7 1/2” O. D. of Steel Shaft
12” Diameter Bolt Circle
CL of Hand Hole and Access Door
Access Door
Ladder RestOptional
4’-3”
SPRING CITY ELECTRICAL MFG. CO., INHall & Main Streets, P. O. Box 19Spring City, PA 19475-0019Phone: 610-948-4000 Fax: 610-948-5577Website: www.springci ty.com
Page: BP 41
Catalog No.: HRB-18
Harrisburg Bi-Metal Post18” Two Piece Wrap Base
S p e c i f i c a t i o n
Description
The Harrisburg Bi-Metal post consists of a cast base uin combination with a fabricated column. The fabriccolumn mounts to the foundation at grade and carriesstructural load. The cast base serves both a decorativeprotective function.
Post Material
The base is a heavy wall metal casting available in giron per ASTM A48, ductile Iron per ASTM A536 aluminum per ASTM B26-95 Alloy SR356. The fabried column is tapered at 0.14” per foot and is availablvariable heights. The column can be supplied eismooth or with vertical flutes in patterns of 8 sharp, 12and 16 sharp. Steel columns are available in 11 angauge as standard with other wall thicknesses availupon request. Aluminum column wall thickness rafrom 0.125” to 0.25” with other thicknesses availupon request or as determined by application. For mordepth information on materials, please refer to Materiathe Accessories Section.
Dimensions
Available post heights range from 10’ to 24’ in incremas small as 1”. The cast base has an octagonal cross tion with a base dimension of 18”. The fabricated shas a base plate with four slotted openings for anchor band offers a standard bolt circle of 12”. Other bolt cirare available upon request. Tenon size is variable based upon application.
Installation
A single access door is located in the base to provaccess to the anchor bolts. The door in the base coincwith the hand hole opening in the column for wiaccess. Opposite the hand hole opening inside the coluare a 1/4-20 nut provisions for a ground lug, by othAnchor bolts supplied are per ASTM A36M G55 andfully hot dip galvanized to ASTM A153.
24’-0”
17’-0”
10’-0”
Ordering GuideCast Base Example: IWBHRB-18-CB (Cast Iron Wrap Base Harrisburg-18”Oct. Base-Finish Classic Black)
Material Base: Base Configuration:_____ I Cast Iron_____ D Cast Ductile Iron _____WB Wrap Base HRB-18-(coatings see below)_____ A Cast Aluminum
Column Example: SSH2F-G11-6.75-24-TN2.88/3.00-130/2NW-CB (SteelShaft 12 Flute-11 Gauge-6.75 Shaft Dia.-24’ Ht.-Tenon 2 7/8” Dia. x 3” Ht.-1”x 30” Anchor Bolts / 2 Nuts & Washers per anchor bolt-Finish Classic Black)
Material Column:_____ SSH Steel Shaft _____ ASH Aluminum Shaft
Column Configuration:_____SS Smooth Straight _____ST Smooth Tapered_____8S 8 Sharp Flute _____E3 3.5” Fluted Aluminum_____2F 12 Flat Flute _____E5 5.0” Fluted Aluminum _____6S 16 Sharp Flute _____H5 5.0” Fluted Heavy Wall Aluminum_____OC Octagonal _____E8 8.0” Fluted Aluminum
Column Thickness-Shaft Diameter at Grade-Height (max ht. 24’-0”):_____G11 11 Gauge-6.75-____- _____SC4 Schedule 40-X.X-____ -_____G17 7 Gauge- 6.75-____- _____SC8 Schedule 80-X.X-____-_____G24 3 Gauge- 6.75-____-_____A12 .125”thk alum.-6.75-____- _____A18 .188”thk alum.-6.75-____-_____A20 .200”thk alum.-6.75-____- _____A25 .250”thk alum.-6.75-____-
Post Top Tenon:_____ TN2.88/2.50- 2 7/8” Dia.. x 2 1/2” Ht._____ TN2.88/3.00- 2 7/8” Dia.. x 3” Ht._____ TN3.50/3.00- 3 1/2” Dia.. x 3” H_____ TNXX/XX- Other, please specify: ________” Dia.. x ________” Ht.
Accessories: (See Accessorie Section)
Anchor Bolts:_____ 323/ 3/4” x 24” _____ 124/ 1” x 24” _____ 136/ 1” x 36”_____ 330/ 3/4” x 30” _____ 130/ 1” x 30” _____ 140/ 1” x 40”_____ XXX/ Other _____ 999/ Not required_____ 1NW- 1Nut & Washer / Bolt _____ 2NW- 2 Nuts & Washers / Bolt
Coatings (Paint Finish - For detailed information, see Finish in the Specification Section):_____ PO Prime Paint _____ CB Finish Classic Black_____ BG Finish Bottle Green _____ DB Finish Dark Bronze_____ LB Finish Long Beach Blue _____ GI Finish Grey Iron_____ VG Finish Verde Green _____ CW Finish Custom Wet_____ CU Finish Custom Powder Coat _____ XX Other_____ GV Galvanized _____ UF Unfinished
Harrisburg- Bi-Metal cast base and fabricatedcolumn. One piece all cast material version ofthis style available, see the Lighting Post - CastSection
SPRING CITY ELECTRICAL MFG. CO., INC.Hall & Main Streets, P. O. Box 19Spring City, PA 19475-0019Phone: 610-948-4000 Fax: 610-948-5577Website: www.springci ty.com
Page: BP 42
Donut asrequired
6 1/2” Dia.
Max. ht.24’-0”
18” Oct.
AccessDoor
18” Octagonal
11 3/4”
(4) Slotted openings to accommodateanchor bolts
6 3/4” O. D. of Steel Shaft
12” Diameter Bolt Circle
CL of Hand Hole and Access Door
1’-9 3/4”
SPRING CITY ELECTRICAL MFG. CO., INHall & Main Streets, P. O. Box 19Spring City, PA 19475-0019Phone: 610-948-4000 Fax: 610-948-5577Website: www.springci ty.com
Page: BP 43
Catalog No.: FTP-18
Ft. Point Bi-Metal Post18” One Piece Slip Base
S p e c i f i c a t i o n
Description
The Ft. Point Bi-Metal post consists of a cast base usecombination with a fabricated column. The fabriccolumn mounts to the foundation at grade and carriesstructural load. The cast base serves both a decorativeprotective function.
Post Material
The base is a heavy wall metal casting available in giron per ASTM A48, ductile Iron per ASTM A536 aluminum per ASTM B26-95 Alloy SR356. The fabried column is tapered at 0.14” per foot and is availablvariable heights. The column can be supplied eismooth or with vertical flutes in patterns of 8 sharp, 12and 16 sharp. Steel columns are available in 11 angauge as standard with other wall thicknesses availupon request. Aluminum column wall thickness rafrom 0.125” to 0.25” with other thicknesses availupon request or as determined by application. For mordepth information on materials, please refer to Materiathe Accessories Section.
Dimensions
Available post heights range from 10’ to 22’ in incremas small as 1”. The cast base has an octagonal cross tion with a base dimension of 18”. The fabricated shas a base plate with four slotted openings for anchor band offers a standard bolt circle of 17”. Other bolt cirare available upon request. Tenon size is variable based upon application.
Installation
A hand hole opening is located in the column for wiaccess. Opposite the hand hole opening inside the coluare a 1/4-20 nut provisions for a ground lug, by othAnchor bolts supplied are per ASTM A36M G55 andfully hot dip galvanized to ASTM A153.
22’-0”
16’-6”
13’-5”
11’-4”
Ordering GuideCast Base Example: ISBFTP-18-CB (Cast Iron Slip Base Fort Point-18” Oct.Base-Finish Classic Black)
Material Base: Base Configuration:_____ I Cast Iron_____ D Cast Ductile Iron _____SB Slip Base FTP-18-(coatings see below)_____ A Cast Aluminum
Column Example: SSH2F-G11-6.57-22-TN2.88/3.00-130/2NW-CB (SteelShaft 12 Flute-11 Gauge-6.57 Shaft Dia.-22’ Ht.-Tenon 2 7/8” Dia. x 3” Ht.-1”x 30” Anchor Bolts / 2 Nuts & Washers per anchor bolt-Finish Classic Black)
Material Column:_____ SSH Steel Shaft _____ ASH Aluminum Shaft
Column Configuration:_____SS Smooth Straight _____ST Smooth Tapered_____8S 8 Sharp Flute _____E3 3.5” Fluted Aluminum_____2F 12 Flat Flute _____E5 5.0” Fluted Aluminum _____6S 16 Sharp Flute _____H5 5.0” Fluted Heavy Wall Aluminum_____OC Octagonal _____E8 8.0” Fluted Aluminum
Column Thickness-Shaft Diameter at Grade-Height (max ht. 22’-0”):_____G11 11 Gauge-6.57-____- _____SC4 Schedule 40-X.X-____ -_____G17 7 Gauge- 6.57-____- _____SC8 Schedule 80-X.X-____-_____G24 3 Gauge- 6.57-____-_____A12 .125”thk alum.-6.75-____- _____A18 .188”thk alum.-6.75-____-_____A20 .200”thk alum.-6.75-____- _____A25 .250”thk alum.-6.75-____-
Post Top Tenon:_____ TN2.88/2.50- 2 7/8” Dia.. x 2 1/2” Ht._____ TN2.88/3.00- 2 7/8” Dia.. x 3” Ht._____ TN3.50/3.00- 3 1/2” Dia.. x 3” H_____ TNXX/XX- Other, please specify: ________” Dia.. x ________” Ht.
Accessories: (See Accessorie Section)
Anchor Bolts:_____ 323/ 3/4” x 24” _____ 124/ 1” x 24” _____ 136/ 1” x 36”_____ 330/ 3/4” x 30” _____ 130/ 1” x 30” _____ 140/ 1” x 40”_____ XXX/ Other _____ 999/ Not required_____ 1NW- 1Nut & Washer / Bolt _____ 2NW- 2 Nuts & Washers / Bolt
Coatings (Paint Finish - For detailed information, see Finish in the Specification Section):_____ PO Prime Paint _____ CB Finish Classic Black_____ BG Finish Bottle Green _____ DB Finish Dark Bronze_____ LB Finish Long Beach Blue _____ GI Finish Grey Iron_____ VG Finish Verde Green _____ CW Finish Custom Wet_____ CU Finish Custom Powder Coat _____ XX Other_____ GV Galvanized _____ UF Unfinished
Fort Point - Bi-Metal cast base and fabricatedcolumn.
SPRING CITY ELECTRICAL MFG. CO., INC.Hall & Main Streets, P. O. Box 19Spring City, PA 19475-0019Phone: 610-948-4000 Fax: 610-948-5577Website: www.springci ty.com
Page: BP 44
6”, 7” or 9” Dia.as determined bycolumn diam.
6 1/4” Dia.
Max. ht.22’-0”
18” Oct.
SuggestedFinishGrade
6”
18” Octagonal
15” (4) Slotted openings to accommodateanchor bolts
6.57” O. D. of Steel Shaft
17” Diameter Bolt Circle
Adaptor Optional
2’-4
3/4
”
SPRING CITY ELECTRICAL MFG. CO., INHall & Main Streets, P. O. Box 19Spring City, PA 19475-0019Phone: 610-948-4000 Fax: 610-948-5577Website: www.springci ty.com
Page: BP 45
Catalog No.: WSW-18
Westwood Bi-Metal Post18” Two Piece Wrap Base
S p e c i f i c a t i o n
Description
The Westwood Bi-Metal post consists of a cast base uin combination with a fabricated column. The fabriccolumn mounts to the foundation at grade and carriesstructural load. The cast base serves both a decorativeprotective function.
Post Material
The base is a heavy wall metal casting available in giron per ASTM A48, ductile Iron per ASTM A536 aluminum per ASTM B26-95 Alloy SR356. The fabried column is tapered at 0.14” per foot and is availablvariable heights. The column can be supplied eismooth or with vertical flutes in patterns of 8 sharp, 12and 16 sharp. Steel columns are available in 11 angauge as standard with other wall thicknesses availupon request. Aluminum column wall thickness rafrom 0.125” to 0.25” with other thicknesses availupon request or as determined by application. For mordepth information on materials, please refer to Materiathe Accessories Section.
Dimensions
Available post heights range from 10’ to 30’ in incremas small as 1”. The cast base has an octagonal cross tion with a base dimension of 18”. The fabricated shas a base plate with four slotted openings for anchor band offers a standard bolt circle of 12”. Other bolt cirare available upon request. Tenon size is variable based upon application.
Installation
A single access door is located in the base to provaccess to the anchor bolts. The door in the base coincwith the hand hole opening in the column for wiaccess. Opposite the hand hole opening inside the coluare a 1/4-20 nut provisions for a ground lug, by othAnchor bolts supplied are per ASTM A36M G55 andfully hot dip galvanized to ASTM A153.
30’-0”
20’-0”
10’-0”
Ordering GuideCast Base Example: IWBWSW-18-CB (Cast Iron Wrap Base Westwood-18”Oct. Base-Finish Classic Black)
Material Base: Base Configuration:_____ I Cast Iron_____ D Cast Ductile Iron _____WB Wrap Base WSW-18-(coatings see below)_____ A Cast Aluminum
Column Example: SSH2F-G11-7.50-30-TN2.88/3.00-130/2NW-CB (SteelShaft 12 Flute-11 Gauge-7.50 Shaft Dia.-30’ Ht.-Tenon 2 7/8” Dia. x 3” Ht.-1”x 30” Anchor Bolts / 2 Nuts & Washers per anchor bolt-Finish Classic Black)
Material Column:_____ SSH Steel Shaft _____ ASH Aluminum Shaft
Column Configuration:_____SS Smooth Straight _____ST Smooth Tapered_____8S 8 Sharp Flute _____E3 3.5” Fluted Aluminum_____2F 12 Flat Flute _____E5 5.0” Fluted Aluminum _____6S 16 Sharp Flute _____H5 5.0” Fluted Heavy Wall Aluminum_____OC Octagonal _____E8 8.0” Fluted Aluminum
Column Thickness-Shaft Diameter at Grade-Height (max ht. 30’-0”):_____G11 11 Gauge-7.5-____- _____SC4 Schedule 40-X.X-____ -_____G17 7 Gauge- 7.5-____- _____SC8 Schedule 80-X.X-____-_____G24 3 Gauge- 7.5-____-_____A12 .125”thk alum.-6.75-____- _____A18 .188”thk alum.-6.75-____-_____A20 .200”thk alum.-6.75-____- _____A25 .250”thk alum.-6.75-____-
Post Top Tenon:_____ TN2.88/2.50- 2 7/8” Dia.. x 2 1/2” Ht._____ TN2.88/3.00- 2 7/8” Dia.. x 3” Ht._____ TN3.50/3.00- 3 1/2” Dia.. x 3” H_____ TNXX/XX- Other, please specify: ________” Dia.. x ________” Ht.
Accessories: (See Accessorie Section)
Anchor Bolts:_____ 323/ 3/4” x 24” _____ 124/ 1” x 24” _____ 136/ 1” x 36”_____ 330/ 3/4” x 30” _____ 130/ 1” x 30” _____ 140/ 1” x 40”_____ XXX/ Other _____ 999/ Not required_____ 1NW- 1Nut & Washer / Bolt _____ 2NW- 2 Nuts & Washers / Bolt
Coatings (Paint Finish - For detailed information, see Finish in the Specification Section):_____ PO Prime Paint _____ CB Finish Classic Black_____ BG Finish Bottle Green _____ DB Finish Dark Bronze_____ LB Finish Long Beach Blue _____ GI Finish Grey Iron_____ VG Finish Verde Green _____ CW Finish Custom Wet_____ CU Finish Custom Powder Coat _____ XX Other_____ GV Galvanized _____ UF Unfinished
Westwood - Bi-Metal cast base and fabricatedcolumn.
SPRING CITY ELECTRICAL MFG. CO., INC.Hall & Main Streets, P. O. Box 19Spring City, PA 19475-0019Phone: 610-948-4000 Fax: 610-948-5577Website: www.springci ty.com
Page: BP 46
Donut asrequired
7” Dia.
18” Oct.
Max. ht.30’-0”
18” Octagonal
11 3/4”
(4) Slotted openings to accommodateanchor bolts
7 1/2” O. D. of Steel Shaft
12” Diameter Bolt Circle
CL of Hand Hole and Access Door
AccessDoor
2’-8 1/2”
SPRING CITY ELECTRICAL MFG. CO., INHall & Main Streets, P. O. Box 19Spring City, PA 19475-0019Phone: 610-948-4000 Fax: 610-948-5577Website: www.springci ty.com
Page: BP 47
Catalog No.: CNC-18
Concord Bi-Metal Post18 1/2” One Piece Slip Base
S p e c i f i c a t i o n
Description
The Concord Bi-Metal post consists of a cast base usecombination with a fabricated column. The fabriccolumn mounts to the foundation at grade and carriesstructural load. The cast base serves both a decorativeprotective function.
Post Material
The base is a heavy wall metal casting available in giron per ASTM A48, ductile Iron per ASTM A536 aluminum per ASTM B26-95 Alloy SR356. The fabried column is tapered at 0.14” per foot and is availablvariable heights. The column can be supplied eismooth or with vertical flutes in patterns of 8 sharp, 12and 16 sharp. Steel columns are available in 11 angauge as standard with other wall thicknesses availupon request. Aluminum column wall thickness rafrom 0.125” to 0.25” with other thicknesses availupon request or as determined by application. For mordepth information on materials, please refer to Materiathe Accessories Section.
Dimensions
Available post heights range from 10’ to 22’ in incremas small as 1”. The cast base has a round cross secwith a base diameter of 18 1/2”. The fabricated shafta base plate with four slotted openings for anchor band offers a standard bolt circle of 12”. Other bolt cirare available upon request. Tenon size is variable based upon application.
Installation
A single access door is located in the base to provaccess to the anchor bolts. The door in the base coincwith the hand hole opening in the column for wiaccess. Opposite the hand hole opening inside the coluare a 1/4-20 nut provisions for a ground lug, by othAnchor bolts supplied are per ASTM A36M G55 andfully hot dip galvanized to ASTM A153.
22’-0”
16’-0”
10’-0”
Ordering GuideCast Base Example: ISBCNC-18.5-CB (Cast Iron Slip Base Concord-18.5”Dia. Base-Finish Classic Black)
Material Base: Base Configuration:_____ I Cast Iron_____ D Cast Ductile Iron _____SB Slip Base CNC-18.5-(coatings see below)_____ A Cast Aluminum
Column Example: SSH8S-G11-6.57-22-TN2.88/3.00-130/2NW-CB (SteelShaft 8 Flute-11 Gauge-6.57 Shaft Dia.-22’ Ht.-Tenon 2 7/8” Dia. x 3” Ht.-1” x30” Anchor Bolts / 2 Nuts & Washers per anchor bolt-Finish Classic Black)
Material Column:_____ SSH Steel Shaft _____ ASH Aluminum Shaft
Column Configuration:_____SS Smooth Straight _____ST Smooth Tapered_____8S 8 Sharp Flute _____E3 3.5” Fluted Aluminum_____2F 12 Flat Flute _____E5 5.0” Fluted Aluminum _____6S 16 Sharp Flute _____H5 5.0” Fluted Heavy Wall Aluminum_____OC Octagonal _____E8 8.0” Fluted Aluminum
Column Thickness-Shaft Diameter at Grade-Height (max ht. 22’-0”):_____G11 11 Gauge-6.57-____- _____SC4 Schedule 40-X.X-____ -_____G17 7 Gauge- 6.57-____- _____SC8 Schedule 80-X.X-____-_____G24 3 Gauge- 6.57-____-_____A12 .125”thk alum.-6.75-____- _____A18 .188”thk alum.-6.75-____-_____A20 .200”thk alum.-6.75-____- _____A25 .250”thk alum.-6.75-____-
Post Top Tenon:_____ TN2.88/2.50- 2 7/8” Dia.. x 2 1/2” Ht._____ TN2.88/3.00- 2 7/8” Dia.. x 3” Ht._____ TN3.50/3.00- 3 1/2” Dia.. x 3” H_____ TNXX/XX- Other, please specify: ________” Dia.. x ________” Ht.
Accessories: (See Accessorie Section)
Anchor Bolts:_____ 323/ 3/4” x 24” _____ 124/ 1” x 24” _____ 136/ 1” x 36”_____ 330/ 3/4” x 30” _____ 130/ 1” x 30” _____ 140/ 1” x 40”_____ XXX/ Other _____ 999/ Not required_____ 1NW- 1Nut & Washer / Bolt _____ 2NW- 2 Nuts & Washers / Bolt
Coatings (Paint Finish - For detailed information, see Finish in the Specification Section):_____ PO Prime Paint _____ CB Finish Classic Black_____ BG Finish Bottle Green _____ DB Finish Dark Bronze_____ LB Finish Long Beach Blue _____ GI Finish Grey Iron_____ VG Finish Verde Green _____ CW Finish Custom Wet_____ CU Finish Custom Powder Coat _____ XX Other_____ GV Galvanized _____ UF Unfinished
Concord - Bi-Metal cast base and fabricatedcolumn.
SPRING CITY ELECTRICAL MFG. CO., INC.Hall & Main Streets, P. O. Box 19Spring City, PA 19475-0019Phone: 610-948-4000 Fax: 610-948-5577Website: www.springci ty.com
Page: BP 48
6”, 7” or 9”Dia. asdeterminedby columndiam.
Max. ht.22’-0”
6 3/8” Dia.
AccessDoor
18 1/2” Dia.
18 1/2”Diameter
11”
(4) Slotted openings to accommodateanchor bolts
6.57” O. D. of Steel Shaft
12” Diameter Bolt Circle
CL of Hand Hole and Access Door
1’-5 1/2”
SPRING CITY ELECTRICAL MFG. CO., INHall & Main Streets, P. O. Box 19Spring City, PA 19475-0019Phone: 610-948-4000 Fax: 610-948-5577Website: www.springci ty.com
Page: BP 49
Catalog No.: WLL-16
Wellesley Bi-Metal Post16” Two Piece Wrap Base
S p e c i f i c a t i o n
Description
The Wellesley Bi-Metal post consists of a cast base uin combination with a fabricated column. The fabriccolumn mounts to the foundation at grade and carriesstructural load. The cast base serves both a decorativeprotective function.
Post Material
The base is a heavy wall metal casting available in giron per ASTM A48, ductile Iron per ASTM A536 aluminum per ASTM B26-95 Alloy SR356. The fabried column is tapered at 0.14” per foot and is availablvariable heights. The column can be supplied eismooth or with vertical flutes in patterns of 8 sharp, 12and 16 sharp. Steel columns are available in 11 angauge as standard with other wall thicknesses availupon request. Aluminum column wall thickness rafrom 0.125” to 0.25” with other thicknesses availupon request or as determined by application. For mordepth information on materials, please refer to Materiathe Accessories Section.
Dimensions
Available post heights range from 10’ to 19’ in incremas small as 1”. The cast base has a round cross secwith a base diameter of 16”. The fabricated shaft hbase plate with four slotted openings for anchor bolts offers a standard bolt circle of 12”. Other bolt circlesavailable upon request. Tenon size is variable and baupon application.
Installation
A single access door is located in the base to provaccess to the anchor bolts. The door in the base coincwith the hand hole opening in the column for wiaccess. Opposite the hand hole opening inside the coluare a 1/4-20 nut provisions for a ground lug, by othAnchor bolts supplied are per ASTM A36M G55 andfully hot dip galvanized to ASTM A153.
19’-0”
14’-0”
10’-0”
Ordering GuideCast Base Example: IWBWLL-16-CB (Cast Iron Wrap Base Wellesley -16”Dia. Base-Finish Classic Black)
Material Base: Base Configuration:_____ I Cast Iron_____ D Cast Ductile Iron _____WB Wrap Base WLL-16-(coatings see below)_____ A Cast Aluminum
Column Example: SSH8S-G11-6.00-19-TN2.88/3.00-130/2NW-CB (SteelShaft 8 Flute-11 Gauge-6.00 Shaft Dia.-19’ Ht.-Tenon 2 7/8” Dia. x 3” Ht.-1” x30” Anchor Bolts / 2 Nuts & Washers per anchor bolt-Finish Classic Black)
Material Column:_____ SSH Steel Shaft _____ ASH Aluminum Shaft
Column Configuration:_____SS Smooth Straight _____ST Smooth Tapered_____8S 8 Sharp Flute _____E3 3.5” Fluted Aluminum_____2F 12 Flat Flute _____E5 5.0” Fluted Aluminum _____6S 16 Sharp Flute _____H5 5.0” Fluted Heavy Wall Aluminum_____OC Octagonal _____E8 8.0” Fluted Aluminum
Column Thickness-Shaft Diameter at Grade-Height (max ht. 19’-0”):_____G11 11 Gauge-6.0-____- _____SC4 Schedule 40-X.X-____ -_____G17 7 Gauge- 6.0-____- _____SC8 Schedule 80-X.X-____-_____G24 3 Gauge- 6.0-____-_____A12 .125”thk alum.-6.75-____- _____A18 .188”thk alum.-6.75-____-_____A20 .200”thk alum.-6.75-____- _____A25 .250”thk alum.-6.75-____-
Post Top Tenon:_____ TN2.88/2.50- 2 7/8” Dia.. x 2 1/2” Ht._____ TN2.88/3.00- 2 7/8” Dia.. x 3” Ht._____ TN3.50/3.00- 3 1/2” Dia.. x 3” H_____ TNXX/XX- Other, please specify: ________” Dia.. x ________” Ht.
Accessories: (See Accessorie Section)
Anchor Bolts:_____ 323/ 3/4” x 24” _____ 124/ 1” x 24” _____ 136/ 1” x 36”_____ 330/ 3/4” x 30” _____ 130/ 1” x 30” _____ 140/ 1” x 40”_____ XXX/ Other _____ 999/ Not required_____ 1NW- 1Nut & Washer / Bolt _____ 2NW- 2 Nuts & Washers / Bolt
Coatings (Paint Finish - For detailed information, see Finish in the Specification Section):_____ PO Prime Paint _____ CB Finish Classic Black_____ BG Finish Bottle Green _____ DB Finish Dark Bronze_____ LB Finish Long Beach Blue _____ GI Finish Grey Iron_____ VG Finish Verde Green _____ CW Finish Custom Wet_____ CU Finish Custom Powder Coat _____ XX Other_____ GV Galvanized _____ UF Unfinished
Wellesley- Bi-Metal cast base and fabricatedcolumn.
SPRING CITY ELECTRICAL MFG. CO., INC.Hall & Main Streets, P. O. Box 19Spring City, PA 19475-0019Phone: 610-948-4000 Fax: 610-948-5577Website: www.springci ty.com
Page: BP 50
6”, 7” or 9”Dia. as deter-mined by col-umn diam.
Max. ht.19’-0”
5 5/8” Dia.
AccessDoor
16” Dia.
16” Diameter
11”
(4) Slotted openings to accommodateanchor bolts
6” O. D. of Steel Shaft12” Diameter Bolt Circle
CL of Hand Hole and Access Door
2’-1”
SPRING CITY ELECTRICAL MFG. CO., INHall & Main Streets, P. O. Box 19Spring City, PA 19475-0019Phone: 610-948-4000 Fax: 610-948-5577Website: www.springci ty.com
Page: BP 51
Catalog No.: NBP-13
Newburyport Bi-Metal Post13” One Piece Slip Base
S p e c i f i c a t i o n
Description
The Newburyport Bi-Metal post consists of a cast bused in combination with a fabricated column. The facated column mounts to the foundation at grade and ries the structural load. The cast base serves both a drative and protective function.
Post Material
The base is a heavy wall metal casting available in giron per ASTM A48, ductile Iron per ASTM A536 aluminum per ASTM B26-95 Alloy SR356. The fabried column is tapered at 0.14” per foot and is availablvariable heights. The column can be supplied eismooth or with vertical flutes in patterns of 8 sharp, 12and 16 sharp. Steel columns are available in 11 angauge as standard with other wall thicknesses availupon request. Aluminum column wall thickness rafrom 0.125” to 0.25” with other thicknesses availupon request or as determined by application. For mordepth information on materials, please refer to Materiathe Accessories Section.
Dimensions
Available post heights range from 10’ to 17’ in incremas small as 1”. The cast base has a round cross secwith a base diameter of 13”. The fabricated shaft hbase plate with four slotted openings for anchor bolts offers a standard bolt circle of 9”. Other bolt circlesavailable upon request. Tenon size is variable and baupon application.
Installation
A single access door is located in the base to provaccess to the anchor bolts. The door in the base coincwith the hand hole opening in the column for wiaccess. Opposite the hand hole opening inside the coluare a 1/4-20 nut provisions for a ground lug, by othAnchor bolts supplied are per ASTM A36M G55 andfully hot dip galvanized to ASTM A153.
17’-0”
13’-0”
10’-0”
Ordering GuideCast Base Example: ISBNBP-13-CB (Cast Iron Slip Base Newburyport-13”Dia. Base-Finish Classic Black)
Material Base: Base Configuration:_____ I Cast Iron_____ D Cast Ductile Iron _____SB Slip Base NBP-13-(coatings see below)_____ A Cast Aluminum
Column Example: SSH8S-G11-5.68-17-TN2.88/3.00-130/2NW-CB (SteelShaft 8 Flute-11 Gauge-5.68 Shaft Dia.-17’ Ht.-Tenon 2 7/8” Dia. x 3” Ht.-1” x30” Anchor Bolts / 2 Nuts & Washers per anchor bolt-Finish Classic Black)
Material Column:_____ SSH Steel Shaft _____ ASH Aluminum Shaft
Column Configuration:_____SS Smooth Straight _____ST Smooth Tapered_____8S 8 Sharp Flute _____E3 3.5” Fluted Aluminum_____2F 12 Flat Flute _____E5 5.0” Fluted Aluminum _____6S 16 Sharp Flute _____H5 5.0” Fluted Heavy Wall Aluminum_____OC Octagonal _____E8 8.0” Fluted Aluminum
Column Thickness-Shaft Diameter at Grade-Height (max ht. 17’-0”):_____G11 11 Gauge-5.68-____- _____SC4 Schedule 40-X.X-____ -_____G17 7 Gauge- 5.68-____- _____SC8 Schedule 80-X.X-____-_____G24 3 Gauge- 5.68-____-_____A12 .125”thk alum.-6.75-____- _____A18 .188”thk alum.-6.75-____-_____A20 .200”thk alum.-6.75-____- _____A25 .250”thk alum.-6.75-____-
Post Top Tenon:_____ TN2.88/2.50- 2 7/8” Dia.. x 2 1/2” Ht._____ TN2.88/3.00- 2 7/8” Dia.. x 3” Ht._____ TN3.50/3.00- 3 1/2” Dia.. x 3” H_____ TNXX/XX- Other, please specify: ________” Dia.. x ________” Ht.
Accessories: (See Accessorie Section)
Anchor Bolts:_____ 323/ 3/4” x 24” _____ 124/ 1” x 24” _____ 136/ 1” x 36”_____ 330/ 3/4” x 30” _____ 130/ 1” x 30” _____ 140/ 1” x 40”_____ XXX/ Other _____ 999/ Not required_____ 1NW- 1Nut & Washer / Bolt _____ 2NW- 2 Nuts & Washers / Bolt
Coatings (Paint Finish - For detailed information, see Finish in the Specification Section):_____ PO Prime Paint _____ CB Finish Classic Black_____ BG Finish Bottle Green _____ DB Finish Dark Bronze_____ LB Finish Long Beach Blue _____ GI Finish Grey Iron_____ VG Finish Verde Green _____ CW Finish Custom Wet_____ CU Finish Custom Powder Coat _____ XX Other_____ GV Galvanized _____ UF Unfinished
Newburyport - Bi-Metal cast base and fabri-cated column. One piece all cast material ver-sion of this style available, see the LightingPost - Cast Section
SPRING CITY ELECTRICAL MFG. CO., INC.Hall & Main Streets, P. O. Box 19Spring City, PA 19475-0019Phone: 610-948-4000 Fax: 610-948-5577Website: www.springci ty.com
Page: BP 52
6”, 7” or 9”Dia. asdeterminedby columndiam.
Max. ht.17’-0”
5 1/4” Dia.
AccessDoor
13” Dia.
13” Diameter
11”
(4) openings to accommodate anchor bolts
5.68” O. D. of Steel Shaft
9” Diameter Bolt Circle
CL of Hand Hole and Access Door
3’-0 1/4”
SPRING CITY ELECTRICAL MFG. CO., INHall & Main Streets, P. O. Box 19Spring City, PA 19475-0019Phone: 610-948-4000 Fax: 610-948-5577Website: www.springci ty.com
Page: BP 53
Newburyport Bi-Metal Post17” Two Piece Wrap Base
S p e c i f i c a t i o n
Description
The Newburyport Bi-Metal post consists of a cast bused in combination with a fabricated column. The facated column mounts to the foundation at grade and ries the structural load. The cast base serves both a drative and protective function.
Post Material
The base is a heavy wall metal casting available in giron per ASTM A48, ductile Iron per ASTM A536 aluminum per ASTM B26-95 Alloy SR356. The fabried column is tapered at 0.14” per foot and is availablvariable heights. The column can be supplied eismooth or with vertical flutes in patterns of 8 sharp, 12and 16 sharp. Steel columns are available in 11 angauge as standard with other wall thicknesses availupon request. Aluminum column wall thickness rafrom 0.125” to 0.25” with other thicknesses availupon request or as determined by application. For mordepth information on materials, please refer to Materiathe Accessories Section.
Dimensions
Available post heights range from 10’ to 17’ in incremas small as 1”. The cast base has a round cross secwith a base diameter of 17”. The fabricated shaft hbase plate with four slotted openings for anchor bolts offers a standard bolt circle of 12”. Other bolt circlesavailable upon request. Tenon size is variable and baupon application.
Installation
A single access door is located in the base to provaccess to the anchor bolts. The door in the base coincwith the hand hole opening in the column for wiaccess. Opposite the hand hole opening inside the coluare a 1/4-20 nut provisions for a ground lug, by othAnchor bolts supplied are per ASTM A36M G55 andfully hot dip galvanized to ASTM A153.
Catalog No.: NBP-1717’-0”
13’-0”
10’-0”
Ordering GuideCast Base Example: IWBNBP-17-CB (Cast Iron Wrap Base Newburyport-17”Dia. Base-Finish Classic Black)
Material Base: Base Configuration:_____ I Cast Iron_____ D Cast Ductile Iron _____WB Wrap Base NBP-17-(coatings see below)_____ A Cast Aluminum
Column Example: SSH2F-G11-5.68-22-TN2.88/3.00-130/2NW-CB (SteelShaft 12 Flute-11 Gauge-5.68 Shaft Dia.-22’ Ht.-Tenon 2 7/8” Dia. x 3” Ht.-1”x 30” Anchor Bolts / 2 Nuts & Washers per anchor bolt-Finish Classic Black)
Material Column:_____ SSH Steel Shaft _____ ASH Aluminum Shaft
Column Configuration:_____SS Smooth Straight _____ST Smooth Tapered_____8S 8 Sharp Flute _____E3 3.5” Fluted Aluminum_____2F 12 Flat Flute _____E5 5.0” Fluted Aluminum _____6S 16 Sharp Flute _____H5 5.0” Fluted Heavy Wall Aluminum_____OC Octagonal _____E8 8.0” Fluted Aluminum
Column Thickness-Shaft Diameter at Grade-Height (max ht. 22’-0”):_____G11 11 Gauge-5.68-____- _____SC4 Schedule 40-X.X-____ -_____G17 7 Gauge- 5.68-____- _____SC8 Schedule 80-X.X-____-_____G24 3 Gauge- 5.68-____-_____A12 .125”thk alum.-6.75-____- _____A18 .188”thk alum.-6.75-____-_____A20 .200”thk alum.-6.75-____- _____A25 .250”thk alum.-6.75-____-
Post Top Tenon:_____ TN2.88/2.50- 2 7/8” Dia.. x 2 1/2” Ht._____ TN2.88/3.00- 2 7/8” Dia.. x 3” Ht._____ TN3.50/3.00- 3 1/2” Dia.. x 3” H_____ TNXX/XX- Other, please specify: ________” Dia.. x ________” Ht.
Accessories: (See Accessorie Section)
Anchor Bolts:_____ 323/ 3/4” x 24” _____ 124/ 1” x 24” _____ 136/ 1” x 36”_____ 330/ 3/4” x 30” _____ 130/ 1” x 30” _____ 140/ 1” x 40”_____ XXX/ Other _____ 999/ Not required_____ 1NW- 1Nut & Washer / Bolt _____ 2NW- 2 Nuts & Washers / Bolt
Coatings (Paint Finish - For detailed information, see Finish in the Specification Section):_____ PO Prime Paint _____ CB Finish Classic Black_____ BG Finish Bottle Green _____ DB Finish Dark Bronze_____ LB Finish Long Beach Blue _____ GI Finish Grey Iron_____ VG Finish Verde Green _____ CW Finish Custom Wet_____ CU Finish Custom Powder Coat _____ XX Other_____ GV Galvanized _____ UF Unfinished
Newburyport - Bi-Metal cast base and fabri-cated column.
SPRING CITY ELECTRICAL MFG. CO., INC.Hall & Main Streets, P. O. Box 19Spring City, PA 19475-0019Phone: 610-948-4000 Fax: 610-948-5577Website: www.springci ty.com
Page: BP 54
6”, 7” or 9”Dia. as deter-mined by col-umn diam.
5 1/4” Dia.
Max. ht.17’-0”
AccessDoor
17” Dia.
17” Diameter
11 3/4”
5.68” O. D. of Steel Shaft
12” Diameter Bolt Circle
CL of Hand Hole and Access Door
(4) Slotted openings to accommodateanchor bolts
3’-0 1/2”
SPRING CITY ELECTRICAL MFG. CO., INHall & Main Streets, P. O. Box 19Spring City, PA 19475-0019Phone: 610-948-4000 Fax: 610-948-5577Website: www.springci ty.com
Page: BP 55
Geneva Bi-Metal Post21” One Piece Slip Base
S p e c i f i c a t i o n
Description
The Geneva Bi-Metal post consists of a cast base usecombination with a fabricated column. The fabriccolumn mounts to the foundation at grade and carriesstructural load. The cast base serves both a decorativeprotective function.
Post Material
The base is a heavy wall metal casting available in giron per ASTM A48, ductile Iron per ASTM A536 aluminum per ASTM B26-95 Alloy SR356. The fabried column is tapered at 0.14” per foot and is availablvariable heights. The column can be supplied eismooth or with vertical flutes in patterns of 8 sharp, 12and 16 sharp. Steel columns are available in 11 angauge as standard with other wall thicknesses availupon request. Aluminum column wall thickness rafrom 0.125” to 0.25” with other thicknesses availupon request or as determined by application. For mordepth information on materials, please refer to Materiathe Accessories Section.
Dimensions
Available post heights range from 10’ to 13’-5” in inments as small as 1”. The cast base has a round cross tion with a base diameter of 21”. The fabricated shafta base plate with four slotted openings for anchor band offers a standard bolt circle of 12”. Other bolt cirare available upon request. Tenon size is variable based upon application.
Installation
A single access door is located in the base to provaccess to the anchor bolts. The door in the base coincwith the hand hole opening in the column for wiaccess. Opposite the hand hole opening inside the coluare a 1/4-20 nut provisions for a ground lug, by othAnchor bolts supplied are per ASTM A36M G55 andfully hot dip galvanized to ASTM A153.
Catalog No.: GNV-21
13’-0”
12’-0”
10’-0”
Ordering GuideCast Base Example: ISBGNV-21-CB (Cast Iron Slip Base Geneva-21” Dia.Base-Finish Classic Black)
Material Base: Base Configuration:_____ I Cast Iron_____ D Cast Ductile Iron _____SB Slip Base GNV-21-(coatings see below)_____ A Cast Aluminum
Column Example: SSHST-G11-5.25-13.5-TN2.88/3.00-130/2NW-CB (SteelShaft Smooth Tapered-11 Gauge-5.25 Shaft Dia.-13’-5” Ht.-Tenon 2 7/8” Dia. x 3” Ht.-1” x 30” Anchor Bolts / 2 Nuts & Washers per anchor bolt-Finish Classic Black)
Material Column:_____ SSH Steel Shaft _____ ASH Aluminum Shaft
Column Configuration:_____SS Smooth Straight _____ST Smooth Tapered_____8S 8 Sharp Flute _____E3 3.5” Fluted Aluminum_____2F 12 Flat Flute _____E5 5.0” Fluted Aluminum _____6S 16 Sharp Flute _____H5 5.0” Fluted Heavy Wall Aluminum_____OC Octagonal _____E8 8.0” Fluted Aluminum
Column Thickness-Shaft Diameter at Grade-Height (max ht. 13’-5”):_____G11 11 Gauge-5.25-____- _____SC4 Schedule 40-X.X-____ -_____G17 7 Gauge- 5.25-____- _____SC8 Schedule 80-X.X-____-_____G24 3 Gauge- 5.25-____-_____A12 .125”thk alum.-6.75-____- _____A18 .188”thk alum.-6.75-____-_____A20 .200”thk alum.-6.75-____- _____A25 .250”thk alum.-6.75-____-
Post Top Tenon:_____ TN2.88/2.50- 2 7/8” Dia.. x 2 1/2” Ht._____ TN2.88/3.00- 2 7/8” Dia.. x 3” Ht._____ TN3.50/3.00- 3 1/2” Dia.. x 3” H_____ TNXX/XX- Other, please specify: ________” Dia.. x ________” Ht.
Accessories: (See Accessorie Section)
Anchor Bolts:_____ 323/ 3/4” x 24” _____ 124/ 1” x 24” _____ 136/ 1” x 36”_____ 330/ 3/4” x 30” _____ 130/ 1” x 30” _____ 140/ 1” x 40”_____ XXX/ Other _____ 999/ Not required_____ 1NW- 1Nut & Washer / Bolt _____ 2NW- 2 Nuts & Washers / Bolt
Coatings (Paint Finish - For detailed information, see Finish in the Specification Section):_____ PO Prime Paint _____ CB Finish Classic Black_____ BG Finish Bottle Green _____ DB Finish Dark Bronze_____ LB Finish Long Beach Blue _____ GI Finish Grey Iron_____ VG Finish Verde Green _____ CW Finish Custom Wet_____ CU Finish Custom Powder Coat _____ XX Other_____ GV Galvanized _____ UF Unfinished
Geneva - Bi-Metal cast base and fabricatedcolumn.
SPRING CITY ELECTRICAL MFG. CO., INC.Hall & Main Streets, P. O. Box 19Spring City, PA 19475-0019Phone: 610-948-4000 Fax: 610-948-5577Website: www.springci ty.com
Page: BP 56
6”, 7” or 9”Dia. as deter-mined by col-umn diam.
4 5/8” Dia.
AccessDoor
21” Dia.
Max. ht.13’-5”
21” Diameter
11 3/4”
5 1/4” O. D. of Steel Shaft
12” Diameter Bolt Circle
CL of Hand Hole and Access Door
(4) Slotted openings to accommodateanchor bolts
4’-9 3/4”
SPRING CITY ELECTRICAL MFG. CO., INHall & Main Streets, P. O. Box 19Spring City, PA 19475-0019Phone: 610-948-4000 Fax: 610-948-5577Website: www.springci ty.com
Page: BP 57
Parkwood Bi-Metal Post20” One Piece Slip or Two Piece Wrap Base
S p e c i f i c a t i o n
Description
The Parkwood Bi-Metal post consists of a cast base uin combination with a fabricated column. The fabriccolumn mounts to the foundation at grade and carriesstructural load. The cast base serves both a decorativeprotective function.
Post Material
The base is a heavy wall metal casting available in giron per ASTM A48, ductile Iron per ASTM A536 aluminum per ASTM B26-95 Alloy SR356. The fabried column is tapered at 0.14” per foot and is availablvariable heights. The column can be supplied eismooth or with vertical flutes in patterns of 8 sharp, 12and 16 sharp. Steel columns are available in 11 angauge as standard with other wall thicknesses availupon request. Aluminum column wall thickness rafrom 0.125” to 0.25” with other thicknesses availupon request or as determined by application. For mordepth information on materials, please refer to Materiathe Accessories Section.
Dimensions
Available post heights range from 10’ to 26’ in incremas small as 1”. The cast base has an octagonal cross tion with a base dimension of 20”. The fabricated shas a base plate with four slotted openings for anchor band offers a standard bolt circle of 12”. Other bolt cirare available upon request. Tenon size is variable based upon application.
Installation
A single access door is located in the base to provaccess to the anchor bolts. The door in the base coincwith the hand hole opening in the column for wiaccess. Opposite the hand hole opening inside the coluare a 1/4-20 nut provisions for a ground lug, by othAnchor bolts supplied are per ASTM A36M G55 andfully hot dip galvanized to ASTM A153.
Catalog No.: PKW-2026’-0”
18’-0”
10’-0”
Ordering GuideCast Base Example: ISBPKW-20-CB (Cast Iron Slip Base Parkwood-20” Oct.Base-Finish Classic Black)
Material Base: Base Configuration:_____ I Cast Iron _____SB Slip Base PKW-20-(coatings see below)_____ D Cast Ductile Iron _____WB Wrap Base PKW-20-(coatings see below)_____ A Cast Aluminum
Column Example: SSH2F-G11-7.00-26-TN2.88/3.00-130/2NW-CB (SteelShaft 12 Flute-11 Gauge-7.00 Shaft Dia.-26’ Ht.-Tenon 2 7/8” Dia. x 3” Ht.-1”x 30” Anchor Bolts / 2 Nuts & Washers per anchor bolt-Finish Classic Black)
Material Column:_____ SSH Steel Shaft _____ ASH Aluminum Shaft
Column Configuration:_____SS Smooth Straight _____ST Smooth Tapered_____8S 8 Sharp Flute _____E3 3.5” Fluted Aluminum_____2F 12 Flat Flute _____E5 5.0” Fluted Aluminum _____6S 16 Sharp Flute _____H5 5.0” Fluted Heavy Wall Aluminum_____OC Octagonal _____E8 8.0” Fluted Aluminum
Column Thickness-Shaft Diameter at Grade-Height (max ht. 26’-0”):_____G11 11 Gauge-7.0-____- _____SC4 Schedule 40-X.X-____ -_____G17 7 Gauge- 7.0-____- _____SC8 Schedule 80-X.X-____-_____G24 3 Gauge- 7.0-____-_____A12 .125”thk alum.-6.75-____- _____A18 .188”thk alum.-6.75-____-_____A20 .200”thk alum.-6.75-____- _____A25 .250”thk alum.-6.75-____-
Post Top Tenon:_____ TN2.88/2.50- 2 7/8” Dia.. x 2 1/2” Ht._____ TN2.88/3.00- 2 7/8” Dia.. x 3” Ht._____ TN3.50/3.00- 3 1/2” Dia.. x 3” H_____ TNXX/XX- Other, please specify: ________” Dia.. x ________” Ht.
Accessories: (See Accessorie Section)
Anchor Bolts:_____ 323/ 3/4” x 24” _____ 124/ 1” x 24” _____ 136/ 1” x 36”_____ 330/ 3/4” x 30” _____ 130/ 1” x 30” _____ 140/ 1” x 40”_____ XXX/ Other _____ 999/ Not required_____ 1NW- 1Nut & Washer / Bolt _____ 2NW- 2 Nuts & Washers / Bolt
Coatings (Paint Finish - For detailed information, see Finish in the Specification Section):_____ PO Prime Paint _____ CB Finish Classic Black_____ BG Finish Bottle Green _____ DB Finish Dark Bronze_____ LB Finish Long Beach Blue _____ GI Finish Grey Iron_____ VG Finish Verde Green _____ CW Finish Custom Wet_____ CU Finish Custom Powder Coat _____ XX Other_____ GV Galvanized _____ UF Unfinished
Parkwood - Bi-Metal cast base and fabricatedcolumn. One piece all cast material version ofthis style available, see the Lighting Post - CastSection
SPRING CITY ELECTRICAL MFG. CO., INC.Hall & Main Streets, P. O. Box 19Spring City, PA 19475-0019Phone: 610-948-4000 Fax: 610-948-5577Website: www.springci ty.com
Page: BP 58
6”, 7” or 9”Dia. as deter-mined by col-umn diam.
6 5/8” Dia.
AccessDoor
Max. ht.26’-0”
20” Oct.
20” Octagonal
11 3/4”
7” O. D. of Steel Shaft
12” Diameter Bolt Circle
CL of Hand Hole and Access Door
(4) Slotted openings to accommodateanchor bolts
2’-7”
SPRING CITY ELECTRICAL MFG. CO., INHall & Main Streets, P. O. Box 19Spring City, PA 19475-0019Phone: 610-948-4000 Fax: 610-948-5577Website: www.springci ty.com
Page: BP 59
SL01 Portland Bi-Metal Post20” Slip Base
S p e c i f i c a t i o n
Description
The SL01 Portland Bi-Metal post consists of a cast bused in combination with a fabricated column. The facated column mounts to the foundation at grade and ries the structural load. The cast base serves both a drative and protective function.
Post Material
The base is a heavy wall metal casting available in giron per ASTM A48, ductile Iron per ASTM A536 aluminum per ASTM B26-95 Alloy SR356. The fabried column is tapered at 0.14” per foot and is availablvariable heights. The column can be supplied eismooth or with vertical flutes in patterns of 8 sharp, 12and 16 sharp. Steel columns are available in 11 angauge as standard with other wall thicknesses availupon request. Aluminum column wall thickness rafrom 0.125” to 0.25” with other thicknesses availupon request or as determined by application. For mordepth information on materials, please refer to Materiathe Accessories Section.
Dimensions
Available post heights range from 10’ to 17’ in incremas small as 1”. The cast base has a round cross secwith a base diameter of 20”. The fabricated shaft hbase plate with four slotted openings for anchor bolts offers a standard bolt circle of 9”. Other bolt circlesavailable upon request. Tenon size is variable and baupon application.
Installation
A single access door is located in the base to provaccess to the anchor bolts. The door in the base coincwith the hand hole opening in the column for wiaccess. Opposite the hand hole opening inside the coluare a 1/4-20 nut provisions for a ground lug, by othAnchor bolts supplied are per ASTM A36M G55 andfully hot dip galvanized to ASTM A153.
Catalog No.: SLO-20
17’-0”
13’-5”
10’-0”
Ordering GuideCast Base Example: ISBSLO-20-CB (Cast Iron Slip Base SLO-20” Dia. Base-Finish Classic Black)
Material Base: Base Configuration:_____ I Cast Iron_____ D Cast Ductile Iron _____SB Slip Base SLO-20-(coatings see below)_____ A Cast Aluminum
Column Example: SSH6S-G11-5.75-17-TN2.88/3.00-323/2NW-CB (SteelShaft 16 Flute-11 Gauge-5.75 Shaft Dia.-17’ Ht.-Tenon 2 7/8” Dia. x 3” Ht.-3/4” x 24” Anchor Bolts / 2 Nuts & Washers per anchor bolt-Finish Classic Black)
Material Column:_____ SSH Steel Shaft _____ ASH Aluminum Shaft
Column Configuration:_____SS Smooth Straight _____ST Smooth Tapered_____8S 8 Sharp Flute _____E3 3.5” Fluted Aluminum_____2F 12 Flat Flute _____E5 5.0” Fluted Aluminum _____6S 16 Sharp Flute _____H5 5.0” Fluted Heavy Wall Aluminum_____OC Octagonal _____E8 8.0” Fluted Aluminum
Column Thickness-Shaft Diameter at Grade-Height (max ht. 17’-0”):_____G11 11 Gauge-5.75-____- _____SC4 Schedule 40-X.X-____ -_____G17 7 Gauge- 5.75-____- _____SC8 Schedule 80-X.X-____-_____G24 3 Gauge- 5.75-____-_____A12 .125”thk alum.-6.75-____- _____A18 .188”thk alum.-6.75-____-_____A20 .200”thk alum.-6.75-____- _____A25 .250”thk alum.-6.75-____-
Post Top Tenon:_____ TN2.88/2.50- 2 7/8” Dia.. x 2 1/2” Ht._____ TN2.88/3.00- 2 7/8” Dia.. x 3” Ht._____ TN3.50/3.00- 3 1/2” Dia.. x 3” H_____ TNXX/XX- Other, please specify: ________” Dia.. x ________” Ht.
Accessories: (See Accessorie Section)
Anchor Bolts:_____ 323/ 3/4” x 24” _____ 124/ 1” x 24” _____ 136/ 1” x 36”_____ 330/ 3/4” x 30” _____ 130/ 1” x 30” _____ 140/ 1” x 40”_____ XXX/ Other _____ 999/ Not required_____ 1NW- 1Nut & Washer / Bolt _____ 2NW- 2 Nuts & Washers / Bolt
Coatings (Paint Finish - For detailed information, see Finish in the Specification Section):_____ PO Prime Paint _____ CB Finish Classic Black_____ BG Finish Bottle Green _____ DB Finish Dark Bronze_____ LB Finish Long Beach Blue _____ GI Finish Grey Iron_____ VG Finish Verde Green _____ CW Finish Custom Wet_____ CU Finish Custom Powder Coat _____ XX Other_____ GV Galvanized _____ UF Unfinished
SLO - Bi-Metal cast base and fabricated col-umn.
SPRING CITY ELECTRICAL MFG. CO., INC.Hall & Main Streets, P. O. Box 19Spring City, PA 19475-0019Phone: 610-948-4000 Fax: 610-948-5577Website: www.springci ty.com
Page: BP 60
6”, 7” or 9”Dia. as deter-mined by col-umn diam.
5 3/8” Dia.
AccessDoor
20” Dia.
Max. ht.17’-0”
20” Diameter
9 1/2”(4) openings to accommodateanchor bolts
5 3/4” O. D. of Steel Shaft
9” Diameter Bolt Circle
CL of Hand Hole and Access Door
2’-8 1/2”
SPRING CITY ELECTRICAL MFG. CO., INHall & Main Streets, P. O. Box 19Spring City, PA 19475-0019Phone: 610-948-4000 Fax: 610-948-5577Website: www.springci ty.com
Page: BP 61
Northampton Bi-Metal Post16 1/2” Two Piece Wrap Base
S p e c i f i c a t i o n
Description
The Northampton Bi-Metal post consists of a cast bused in combination with a fabricated column. The facated column mounts to the foundation at grade and ries the structural load. The cast base serves both a drative and protective function.
Post Material
The base is a heavy wall metal casting available in giron per ASTM A48, ductile Iron per ASTM A536 aluminum per ASTM B26-95 Alloy SR356. The fabried column is tapered at 0.14” per foot and is availablvariable heights. The column can be supplied eismooth or with vertical flutes in patterns of 8 sharp, 12and 16 sharp. Steel columns are available in 11 angauge as standard with other wall thicknesses availupon request. Aluminum column wall thickness rafrom 0.125” to 0.25” with other thicknesses availupon request or as determined by application. For mordepth information on materials, please refer to Materiathe Accessories Section.
Dimensions
Available post heights range from 10’ to 17’ in incremas small as 1”. The cast base has a round cross secwith a base diameter of 16 1/2”. The fabricated shafta base plate with four slotted openings for anchor band offers a standard bolt circle of 12”. Other bolt cirare available upon request. Tenon size is variable based upon application.
Installation
A single access door is located in the base to provaccess to the anchor bolts. The door in the base coincwith the hand hole opening in the column for wiaccess. Opposite the hand hole opening inside the coluare a 1/4-20 nut provisions for a ground lug, by othAnchor bolts supplied are per ASTM A36M G55 andfully hot dip galvanized to ASTM A153.
Catalog No.: NRT-1617’-0”
13’-0”
10’-0”
Ordering GuideCast Base Example: IWBNRT-16.5-CB (Cast Iron Wrap Base Northampton-16.5” Dia. Base-Finish Classic Black)
Material Base: Base Configuration:_____ I Cast Iron_____ D Cast Ductile Iron _____WB Wrap Base NRT-16.5-(coatings see below)_____ A Cast Aluminum
Column Example: SSH8S-G11-5.75-17-TN2.88/3.00-323/2NW-CB (SteelShaft 8 Flute-11 Gauge-5.75 Shaft Dia.-17’ Ht.-Tenon 2 7/8” Dia. x 3” Ht.-3/4”x 24” Anchor Bolts / 2 Nuts & Washers per anchor bolt-Finish Classic Black)
Material Column:_____ SSH Steel Shaft _____ ASH Aluminum Shaft
Column Configuration:_____SS Smooth Straight _____ST Smooth Tapered_____8S 8 Sharp Flute _____E3 3.5” Fluted Aluminum_____2F 12 Flat Flute _____E5 5.0” Fluted Aluminum _____6S 16 Sharp Flute _____H5 5.0” Fluted Heavy Wall Aluminum_____OC Octagonal _____E8 8.0” Fluted Aluminum
Column Thickness-Shaft Diameter at Grade-Height (max ht. 17’-0”):_____G11 11 Gauge-5.75-____- _____SC4 Schedule 40-X.X-____ -_____G17 7 Gauge- 5.75-____- _____SC8 Schedule 80-X.X-____-_____G24 3 Gauge- 5.75-____-_____A12 .125”thk alum.-6.75-____- _____A18 .188”thk alum.-6.75-____-_____A20 .200”thk alum.-6.75-____- _____A25 .250”thk alum.-6.75-____-
Post Top Tenon:_____ TN2.88/2.50- 2 7/8” Dia.. x 2 1/2” Ht._____ TN2.88/3.00- 2 7/8” Dia.. x 3” Ht._____ TN3.50/3.00- 3 1/2” Dia.. x 3” H_____ TNXX/XX- Other, please specify: ________” Dia.. x ________” Ht.
Accessories: (See Accessorie Section)
Anchor Bolts:_____ 323/ 3/4” x 24” _____ 124/ 1” x 24” _____ 136/ 1” x 36”_____ 330/ 3/4” x 30” _____ 130/ 1” x 30” _____ 140/ 1” x 40”_____ XXX/ Other _____ 999/ Not required_____ 1NW- 1Nut & Washer / Bolt _____ 2NW- 2 Nuts & Washers / Bolt
Coatings (Paint Finish - For detailed information, see Finish in the Specification Section):_____ PO Prime Paint _____ CB Finish Classic Black_____ BG Finish Bottle Green _____ DB Finish Dark Bronze_____ LB Finish Long Beach Blue _____ GI Finish Grey Iron_____ VG Finish Verde Green _____ CW Finish Custom Wet_____ CU Finish Custom Powder Coat _____ XX Other_____ GV Galvanized _____ UF Unfinished
Northampton - Bi-Metal cast base and fabri-cated column.
SPRING CITY ELECTRICAL MFG. CO., INC.Hall & Main Streets, P. O. Box 19Spring City, PA 19475-0019Phone: 610-948-4000 Fax: 610-948-5577Website: www.springci ty.com
Page: BP 62
6”, 7” or 9”Dia. as deter-mined by col-umn diam.
5 3/8” Dia.
AccessDoor
16 1/2” Dia.
Max. ht.17’-0”
16 1/2” Diameter
11 3/4”
5 3/4” O. D. of Steel Shaft
12” Diameter Bolt Circle
CL of Hand Hole and Access Door
(4) Slotted openings to accommodateanchor bolts
2’-3 1/2”
SPRING CITY ELECTRICAL MFG. CO., INHall & Main Streets, P. O. Box 19Spring City, PA 19475-0019Phone: 610-948-4000 Fax: 610-948-5577Website: www.springci ty.com
Page: BP 63
Northampton Bi-Metal Post20” One Piece Slip or Two Piece Wrap Base
S p e c i f i c a t i o n
Description
The Northampton Bi-Metal post consists of a cast bused in combination with a fabricated column. The facated column mounts to the foundation at grade and ries the structural load. The cast base serves both a drative and protective function.
Post Material
The base is a heavy wall metal casting available in giron per ASTM A48, ductile Iron per ASTM A536 aluminum per ASTM B26-95 Alloy SR356. The fabried column is tapered at 0.14” per foot and is availablvariable heights. The column can be supplied eismooth or with vertical flutes in patterns of 8 sharp, 12and 16 sharp. Steel columns are available in 11 angauge as standard with other wall thicknesses availupon request. Aluminum column wall thickness rafrom 0.125” to 0.25” with other thicknesses availupon request or as determined by application. For mordepth information on materials, please refer to Materiathe Accessories Section.
Dimensions
Available post heights range from 10’ to 30’ in incremas small as 1”. The cast base has a round cross secwith a base diameter of 20”. The fabricated shaft hbase plate with four slotted openings for anchor bolts offers a standard bolt circle of 12”. Other bolt circlesavailable upon request. Tenon size is variable and baupon application.
Installation
A single access door is located in the base to provaccess to the anchor bolts. The door in the base coincwith the hand hole opening in the column for wiaccess. Opposite the hand hole opening inside the coluare a 1/4-20 nut provisions for a ground lug, by othAnchor bolts supplied are per ASTM A36M G55 andfully hot dip galvanized to ASTM A153.
Catalog No.: NRT-2030’-0”
20’-0”
10’-0”
Ordering GuideCast Base Example: ISBNRT-20-CB (Cast Iron Slip Base Northampton-20”Dia. Base-Finish Classic Black)
Material Base: Base Configuration:_____ I Cast Iron _____SB Slip Base NRT-20-(coatings see below)_____ D Cast Ductile Iron _____WB Wrap Base NRT-20-(coatings see below)_____ A Cast Aluminum
Column Example: SSH2F-G11-7.50-30-TN2.88/3.00-130/2NW-CB (SteelShaft 12 Flute-11 Gauge-7.50 Shaft Dia.-30’ Ht.-Tenon 2 7/8” Dia. x 3” Ht.-1”x 30” Anchor Bolts / 2 Nuts & Washers per anchor bolt-Finish Classic Black)
Material Column:_____ SSH Steel Shaft _____ ASH Aluminum Shaft
Column Configuration:_____SS Smooth Straight _____ST Smooth Tapered_____8S 8 Sharp Flute _____E3 3.5” Fluted Aluminum_____2F 12 Flat Flute _____E5 5.0” Fluted Aluminum _____6S 16 Sharp Flute _____H5 5.0” Fluted Heavy Wall Aluminum_____OC Octagonal _____E8 8.0” Fluted Aluminum
Column Thickness-Shaft Diameter at Grade-Height (max ht. 30’-0”):_____G11 11 Gauge-7.5-____- _____SC4 Schedule 40-X.X-____ -_____G17 7 Gauge- 7.5-____- _____SC8 Schedule 80-X.X-____-_____G24 3 Gauge- 7.5-____-_____A12 .125”thk alum.-6.75-____- _____A18 .188”thk alum.-6.75-____-_____A20 .200”thk alum.-6.75-____- _____A25 .250”thk alum.-6.75-____-
Post Top Tenon:_____ TN2.88/2.50- 2 7/8” Dia.. x 2 1/2” Ht._____ TN2.88/3.00- 2 7/8” Dia.. x 3” Ht._____ TN3.50/3.00- 3 1/2” Dia.. x 3” H_____ TNXX/XX- Other, please specify: ________” Dia.. x ________” Ht.
Accessories: (See Accessorie Section)
Anchor Bolts:_____ 323/ 3/4” x 24” _____ 124/ 1” x 24” _____ 136/ 1” x 36”_____ 330/ 3/4” x 30” _____ 130/ 1” x 30” _____ 140/ 1” x 40”_____ XXX/ Other _____ 999/ Not required_____ 1NW- 1Nut & Washer / Bolt _____ 2NW- 2 Nuts & Washers / Bolt
Coatings (Paint Finish - For detailed information, see Finish in the Specification Section):_____ PO Prime Paint _____ CB Finish Classic Black_____ BG Finish Bottle Green _____ DB Finish Dark Bronze_____ LB Finish Long Beach Blue _____ GI Finish Grey Iron_____ VG Finish Verde Green _____ CW Finish Custom Wet_____ CU Finish Custom Powder Coat _____ XX Other_____ GV Galvanized _____ UF Unfinished
Northampton- Bi-Metal cast base and fabri-cated column. One piece all cast material ver-sion of this style available, see the LightingPost - Cast Section
SPRING CITY ELECTRICAL MFG. CO., INC.Hall & Main Streets, P. O. Box 19Spring City, PA 19475-0019Phone: 610-948-4000 Fax: 610-948-5577Website: www.springci ty.com
Page: BP 64
6”, 7” or 9” Dia.as determined bycolumn diam.
7” Dia.
AccessDoor
20” Dia.
Max. ht.30’-0”
20” Diameter
11 3/4”
7 1/2” O. D. of Steel Shaft
12” Diameter Bolt Circle
CL of Hand Hole and Access Door
(4) Slotted openings to accommodateanchor bolts
3’-0”
SPRING CITY ELECTRICAL MFG. CO., INHall & Main Streets, P. O. Box 19Spring City, PA 19475-0019Phone: 610-948-4000 Fax: 610-948-5577Website: www.springci ty.com
Page: BP 65
Northampton Bi-Metal Post24” One Piece Slip or Two Piece Wrap Base
S p e c i f i c a t i o n
Description
The Northampton Bi-Metal post consists of a cast bused in combination with a fabricated column. The facated column mounts to the foundation at grade and ries the structural load. The cast base serves both a drative and protective function.
Post Material
The base is a heavy wall metal casting available in giron per ASTM A48, ductile Iron per ASTM A536 aluminum per ASTM B26-95 Alloy SR356. The fabried column is tapered at 0.14” per foot and is availablvariable heights. The column can be supplied eismooth or with vertical flutes in patterns of 8 sharp, 12and 16 sharp. Steel columns are available in 11 angauge as standard with other wall thicknesses availupon request. Aluminum column wall thickness rafrom 0.125” to 0.25” with other thicknesses availupon request or as determined by application. For mordepth information on materials, please refer to Materiathe Accessories Section.
Dimensions
Available post heights range from 10’ to 30’ in incremas small as 1”. The cast base has a round cross secwith a base diameter of 24”. The fabricated shaft hbase plate with four slotted openings for anchor bolts offers a standard bolt circle of 12”. Other bolt circlesavailable upon request. Tenon size is variable and baupon application.
Installation
A single access door is located in the base to provaccess to the anchor bolts. The door in the base coincwith the hand hole opening in the column for wiaccess. Opposite the hand hole opening inside the coluare a 1/4-20 nut provisions for a ground lug, by othAnchor bolts supplied are per ASTM A36M G55 andfully hot dip galvanized to ASTM A153.
Catalog No.: NRT-2430’-0”
20’-0”
10’-0”
Ordering GuideCast Base Example: ISBNRT-24-CB (Cast Iron Slip Base Northampton-24”Dia. Base-Finish Classic Black)
Material Base: Base Configuration:_____ I Cast Iron _____SB Slip Base NRT-24-(coatings see below)_____ D Cast Ductile Iron _____WB Wrap Base NRT-24-(coatings see below)_____ A Cast Aluminum
Column Example: SSH2F-G11-7.50-30-TN2.88/3.00-130/2NW-CB (SteelShaft 12 Flute-11 Gauge-7.50 Shaft Dia.-30’ Ht.-Tenon 2 7/8” Dia. x 3” Ht.-1”x 30” Anchor Bolts / 2 Nuts & Washers per anchor bolt-Finish Classic Black)
Material Column:_____ SSH Steel Shaft _____ ASH Aluminum Shaft
Column Configuration:_____SS Smooth Straight _____ST Smooth Tapered_____8S 8 Sharp Flute _____E3 3.5” Fluted Aluminum_____2F 12 Flat Flute _____E5 5.0” Fluted Aluminum _____6S 16 Sharp Flute _____H5 5.0” Fluted Heavy Wall Aluminum_____OC Octagonal _____E8 8.0” Fluted Aluminum
Column Thickness-Shaft Diameter at Grade-Height (max ht. 30’-0”):_____G11 11 Gauge-7.5-____- _____SC4 Schedule 40-X.X-____ -_____G17 7 Gauge- 7.5-____- _____SC8 Schedule 80-X.X-____-_____G24 3 Gauge- 7.5-____-_____A12 .125”thk alum.-6.75-____- _____A18 .188”thk alum.-6.75-____-_____A20 .200”thk alum.-6.75-____- _____A25 .250”thk alum.-6.75-____-
Post Top Tenon:_____ TN2.88/2.50- 2 7/8” Dia.. x 2 1/2” Ht._____ TN2.88/3.00- 2 7/8” Dia.. x 3” Ht._____ TN3.50/3.00- 3 1/2” Dia.. x 3” H_____ TNXX/XX- Other, please specify: ________” Dia.. x ________” Ht.
Accessories: (See Accessorie Section)
Anchor Bolts:_____ 323/ 3/4” x 24” _____ 124/ 1” x 24” _____ 136/ 1” x 36”_____ 330/ 3/4” x 30” _____ 130/ 1” x 30” _____ 140/ 1” x 40”_____ XXX/ Other _____ 999/ Not required_____ 1NW- 1Nut & Washer / Bolt _____ 2NW- 2 Nuts & Washers / Bolt
Coatings (Paint Finish - For detailed information, see Finish in the Specification Section):_____ PO Prime Paint _____ CB Finish Classic Black_____ BG Finish Bottle Green _____ DB Finish Dark Bronze_____ LB Finish Long Beach Blue _____ GI Finish Grey Iron_____ VG Finish Verde Green _____ CW Finish Custom Wet_____ CU Finish Custom Powder Coat _____ XX Other_____ GV Galvanized _____ UF Unfinished
Northampton - Bi-Metal cast base and fabri-cated column.
SPRING CITY ELECTRICAL MFG. CO., INC.Hall & Main Streets, P. O. Box 19Spring City, PA 19475-0019Phone: 610-948-4000 Fax: 610-948-5577Website: www.springci ty.com
Page: BP 66
6”, 7” or 9”Dia. as deter-mined by col-umn diam.
7” Dia.
AccessDoor
24” Dia.
Max. ht.30’-0”
24” Diameter
11 3/4”
7 1/2” O. D. of Steel Shaft12” Diameter Bolt Circle
CL of Hand Hole and Access Door
(4) Slotted openings to accommodateanchor bolts
4’-0”
SPRING CITY ELECTRICAL MFG. CO., INHall & Main Streets, P. O. Box 19Spring City, PA 19475-0019Phone: 610-948-4000 Fax: 610-948-5577Website: www.springci ty.com
Page: BP 67
Ohio State University Bi-Metal Pos24” Short One Piece Base
S p e c i f i c a t i o n
Description
The Ohio State University Bi-Metal post consists of a base used in combination with a fabricated column. fabricated column slips into the cast base and the pieces are mechanically attached. The assembly is tmounted to the foundation at grade.
Post Material
The base is a heavy wall metal casting available in giron per ASTM A48, ductile Iron per ASTM A536 aluminum per ASTM B26-95 Alloy SR356. The fabried column is tapered at 0.14” per foot and is availablvariable heights. The column can be supplied eismooth or with vertical flutes in patterns of 8 sharp, 12and 16 sharp. Steel columns are available in 11 angauge as standard with other wall thicknesses availupon request. Aluminum column wall thickness rafrom 0.125” to 0.25” with other thicknesses availupon request or as determined by application. For mordepth information on materials, please refer to Materiathe Accessories Section.
Dimensions
Available post heights range from 10’ to 26’ in incremas small as 1”. The cast base has a round cross secwith a base diameter of 24”. The fabricated shaft hstop ring and internal base plate, both used in securingconnection of the base and column. The base has an igrally cast base flange with four slotted openingsanchor bolts and offers a standard bolt circle of 15”. Obolt circles are available upon request. Tenon size is vable and based upon application.
Installation
A single access door is located in the base to provaccess to the anchor bolts, for wiring as well as accebility to the mechanical attachment of the column tobase. Opposite the access door opening inside the basa 1/4-20 nut provisions for a ground lug, by othAnchor bolts supplied are per ASTM A36M G55 andfully hot dip galvanized to ASTM A153.
Catalog No.: OSS-2426’-0”
18’-0”
10’-0”
Lettering availableon base as required
Your logoavailable on 4sides of baseas required
Optional removablecast ring. Your logoavailable on 4 sidesof cast collar asrequired
Ordering GuideCast Base Example: DISBOSS-24-CB (Cast Ductile Iron Slip Base Ohio StateUniversity Short-24” Dia. Base-Finish Classic Black)
Material Base: Base Configuration:_____ I Cast Iron_____ D Cast Ductile Iron _____SB Slip Base OSS-24-(coatings see below)_____ A Cast Aluminum
Column Example: SSH2F-G7-7.00-26-TN2.88/3.00-130/2NW-CB (Steel Shaft12 Flute-7 Gauge-7.00 Shaft Dia.-26’ Ht.-Tenon 2 7/8” Dia. x 3” Ht.-1” x 30”Anchor Bolts / 2 Nuts & Washers per anchor bolt-Finish Classic Black)
Material Column:_____ SSH Steel Shaft _____ ASH Aluminum Shaft
Column Configuration:_____SS Smooth Straight _____ST Smooth Tapered_____8S 8 Sharp Flute _____E3 3.5” Fluted Aluminum_____2F 12 Flat Flute _____E5 5.0” Fluted Aluminum _____6S 16 Sharp Flute _____H5 5.0” Fluted Heavy Wall Aluminum_____OC Octagonal _____E8 8.0” Fluted Aluminum
Column Thickness-Shaft Diameter at Grade-Height (max ht. 26’-0”):_____G11 11 Gauge-7.0-____- _____SC4 Schedule 40-X.X-____ -_____G17 7 Gauge- 7.0-____- _____SC8 Schedule 80-X.X-____-_____G24 3 Gauge- 7.0-____-_____A12 .125”thk alum.-6.75-____- _____A18 .188”thk alum.-6.75-____-_____A20 .200”thk alum.-6.75-____- _____A25 .250”thk alum.-6.75-____-
Post Top Tenon:_____ TN2.88/2.50- 2 7/8” Dia.. x 2 1/2” Ht._____ TN2.88/3.00- 2 7/8” Dia.. x 3” Ht._____ TN3.50/3.00- 3 1/2” Dia.. x 3” H_____ TNXX/XX- Other, please specify: ________” Dia.. x ________” Ht.
Accessories: (See Accessorie Section)
Anchor Bolts:_____ 323/ 3/4” x 24” _____ 124/ 1” x 24” _____ 136/ 1” x 36”_____ 330/ 3/4” x 30” _____ 130/ 1” x 30” _____ 140/ 1” x 40”_____ XXX/ Other _____ 999/ Not required_____ 1NW- 1Nut & Washer / Bolt _____ 2NW- 2 Nuts & Washers / Bolt
Coatings (Paint Finish - For detailed information, see Finish in the Specification Section):_____ PO Prime Paint _____ CB Finish Classic Black_____ BG Finish Bottle Green _____ DB Finish Dark Bronze_____ LB Finish Long Beach Blue _____ GI Finish Grey Iron_____ VG Finish Verde Green _____ CW Finish Custom Wet_____ CU Finish Custom Powder Coat _____ XX Other_____ GV Galvanized _____ UF Unfinished
Ohio State University Short - Bi-Metal castbase and fabricated column.
SPRING CITY ELECTRICAL MFG. CO., INC.Hall & Main Streets, P. O. Box 19Spring City, PA 19475-0019Phone: 610-948-4000 Fax: 610-948-5577Website: www.springci ty.com
Page: BP 68
6”, 7” or 9” Dia. asdetermined by column diam.
Optional removablecast ring. Your logoavailable as required.
6 3/4” Dia.
Lettering availableon base as required
Access Door
24” Dia.
Max. ht.26’-0”
24” Diameter
12” Dia. Clear Opening
15” Diameter Bolt Circle
CL of Access Door
2’-8 1/2”
Your logoavailable on 4sides of base asrequired
SPRING CITY ELECTRICAL MFG. CO., INHall & Main Streets, P. O. Box 19Spring City, PA 19475-0019Phone: 610-948-4000 Fax: 610-948-5577Website: www.springci ty.com
Page: BP 69
Ohio State University Bi-Metal Pos24” Tall One Piece Base
S p e c i f i c a t i o n
Description
The Ohio State University Bi-Metal post consists of a base used in combination with a fabricated column. fabricated column slips into the cast base and the pieces are mechanically attached. The assembly is tmounted to the foundation at grade.
Post Material
The base is a heavy wall metal casting available in giron per ASTM A48, ductile Iron per ASTM A536 aluminum per ASTM B26-95 Alloy SR356. The fabried column is tapered at 0.14” per foot and is availablvariable heights. The column can be supplied eismooth or with vertical flutes in patterns of 8 sharp, 12and 16 sharp. Steel columns are available in 11 angauge as standard with other wall thicknesses availupon request. Aluminum column wall thickness rafrom 0.125” to 0.25” with other thicknesses availupon request or as determined by application. For mordepth information on materials, please refer to Materiathe Accessories Section.
Dimensions
Available post heights range from 10’ to 26’ in incremas small as 1”. The cast base has a round cross secwith a base diameter of 24”. The fabricated shaft hstop ring and internal base plate, both used in securingconnection of the base and column,. The base has an igrally cast base flange with four slotted openingsanchor bolts and offers a standard bolt circle of 15”. Obolt circles are available upon request. Tenon size is vable and based upon application.
Installation
A single access door is located in the base to provaccess to the anchor bolts, for wiring as well as accebility to the mechanical attachment of the column tobase. Opposite the access door opening inside the basa 1/4-20 nut provisions for a ground lug, by othAnchor bolts supplied are per ASTM A36M G55 andfully hot dip galvanized to ASTM A153.
Catalog No.: OSL-2426’-0”
18’-0”
10’-0”
Lettering availableon base as required
Your logoavailable on 4sides of baseas required
Optional removablecast ring. Your logoavailable on 4 sidesof cast collar asrequired
Ordering GuideCast Base Example: DISBOSL-24-CB (Cast Ductile Iron Slip Base Ohio StateUniversity Tall-24” Dia. Base-Finish Classic Black)
Material Base: Base Configuration:_____ I Cast Iron_____ D Cast Ductile Iron _____SB Slip Base OSL-24-(coatings see below)_____ A Cast Aluminum
Column Example: SSH6S-G7-7.00-26-TN2.88/3.00-130/2NW-CB (Steel Shaft16 Flute-7 Gauge-7.00 Shaft Dia.-26 Ht.-Tenon 2 7/8” Dia. x 3” Ht.-1” x 30”Anchor Bolts / 2 Nuts & Washers per anchor bolt-Finish Classic Black)
Material Column:_____ SSH Steel Shaft _____ ASH Aluminum Shaft
Column Configuration:_____SS Smooth Straight _____ST Smooth Tapered_____8S 8 Sharp Flute _____E3 3.5” Fluted Aluminum_____2F 12 Flat Flute _____E5 5.0” Fluted Aluminum _____6S 16 Sharp Flute _____H5 5.0” Fluted Heavy Wall Aluminum_____OC Octagonal _____E8 8.0” Fluted Aluminum
Column Thickness-Shaft Diameter at Grade-Height (max ht.26’-0”):_____G11 11 Gauge-7.0-____- _____SC4 Schedule 40-X.X-____ -_____G17 7 Gauge- 7.0-____- _____SC8 Schedule 80-X.X-____-_____G24 3 Gauge- 7.0-____-_____A12 .125”thk alum.-6.75-____- _____A18 .188”thk alum.-6.75-____-_____A20 .200”thk alum.-6.75-____- _____A25 .250”thk alum.-6.75-____-
Post Top Tenon:_____ TN2.88/2.50- 2 7/8” Dia.. x 2 1/2” Ht._____ TN2.88/3.00- 2 7/8” Dia.. x 3” Ht._____ TN3.50/3.00- 3 1/2” Dia.. x 3” H_____ TNXX/XX- Other, please specify: ________” Dia.. x ________” Ht.
Accessories: (See Accessorie Section)
Anchor Bolts:_____ 323/ 3/4” x 24” _____ 124/ 1” x 24” _____ 136/ 1” x 36”_____ 330/ 3/4” x 30” _____ 130/ 1” x 30” _____ 140/ 1” x 40”_____ XXX/ Other _____ 999/ Not required_____ 1NW- 1Nut & Washer / Bolt _____ 2NW- 2 Nuts & Washers / Bolt
Coatings (Paint Finish - For detailed information, see Finish in the Specification Section):_____ PO Prime Paint _____ CB Finish Classic Black_____ BG Finish Bottle Green _____ DB Finish Dark Bronze_____ LB Finish Long Beach Blue _____ GI Finish Grey Iron_____ VG Finish Verde Green _____ CW Finish Custom Wet_____ CU Finish Custom Powder Coat _____ XX Other_____ GV Galvanized _____ UF Unfinished
Ohio State University Tall- Bi-Metal castbase and fabricated column.
SPRING CITY ELECTRICAL MFG. CO., INC.Hall & Main Streets, P. O. Box 19Spring City, PA 19475-0019Phone: 610-948-4000 Fax: 610-948-5577Website: www.springci ty.com
Page: BP 70
6”, 7” or 9” Dia.as determined bycolumn diam.
Max. ht.26’-0”
6 3/4” Dia.
Access Door
24” Dia.
24” Diameter
12” Dia. Clear Opening
15” Diameter Bolt Circle
CL of Access Door
3’-10 3/4”
Optional remov-able cast ring. Yourlogo available asrequired.
Lettering availableon base asrequired
Your logoavailable on4 sides ofbase asrequired
SPRING CITY ELECTRICAL MFG. CO., INHall & Main Streets, P. O. Box 19Spring City, PA 19475-0019Phone: 610-948-4000 Fax: 610-948-5577Website: www.springci ty.com
Page: BP 71
Sylvania Bi-Metal Post20” One Piece Slip Base
S p e c i f i c a t i o n
Description
The Sylvania Bi-Metal post consists of a cast base usecombination with a fabricated column. The fabriccolumn mounts to the foundation at grade and carriesstructural load. The cast base serves both a decorativeprotective function.
Post Material
The base is a one-piece heavy wall metal casting availin gray iron per ASTM A48, ductile Iron per ASTM Aand aluminum per ASTM B26-95 Alloy SR356. The ricated column is tapered at 0.14” per foot and is availin variable heights. The column can be supplied eismooth or with vertical flutes in patterns of 8 sharp, 12and 16 sharp. Steel columns are available in 11 angauge as standard with other wall thicknesses availupon request. Aluminum column wall thickness rafrom 0.125” to 0.25” with other thicknesses availupon request or as determined by application. For mordepth information on materials, please refer to Materiathe Accessories Section.
Dimensions
Available post heights range from 10’ to 30’ in incremas small as 1”. The cast base has a round cross secwith a base diameter of 20”. The fabricated shaft hbase plate with four slotted openings for anchor bolts offers a standard bolt circle of 12”. Other bolt circlesavailable upon request. Tenon size is variable and baupon application.
Installation
A single access door is located in the base to provaccess to the anchor bolts. The door in the base coincwith the hand hole opening in the column for wiaccess. Opposite the hand hole opening inside the coluare a 1/4-20 nut provisions for a ground lug, by othAnchor bolts supplied are per ASTM A36M G55 andfully hot dip galvanized to ASTM A153.
Catalog No.: SLV-2030’-0”
20’-0”
10’-0”
Ordering GuideCast Base Example: ISBSLV-20-CB (Cast Iron Slip Base Sylvania-20” Dia.Base-Finish Classic Black)
Material Base: Base Configuration:_____ I Cast Iron _____SB Slip Base SLV-20-(coatings see below)_____ D Cast Ductile Iron_____ A Cast Aluminum
Column Example: SSH8S-G11-7.50-30-TN2.88/3.00-130/2NW-CB (SteelShaft 8 Flute-11 Gauge-7.50 Shaft Dia.-30’ Ht.-Tenon 2 7/8” Dia. x 3” Ht.-1” x30” Anchor Bolts / 2 Nuts & Washers per anchor bolt-Finish Classic Black)
Material Column:_____ SSH Steel Shaft _____ ASH Aluminum Shaft
Column Configuration:_____SS Smooth Straight _____ST Smooth Tapered_____8S 8 Sharp Flute _____E3 3.5” Fluted Aluminum_____2F 12 Flat Flute _____E5 5.0” Fluted Aluminum _____6S 16 Sharp Flute _____H5 5.0” Fluted Heavy Wall Aluminum_____OC Octagonal _____E8 8.0” Fluted Aluminum
Column Thickness-Shaft Diameter at Grade-Height (max ht. 30’-0”):_____G11 11 Gauge-7.5-____- _____SC4 Schedule 40-X.X-____ -_____G17 7 Gauge- 7.5-____- _____SC8 Schedule 80-X.X-____-_____G24 3 Gauge- 7.5-____-_____A12 .125”thk alum.-6.75-____- _____A18 .188”thk alum.-6.75-____-_____A20 .200”thk alum.-6.75-____- _____A25 .250”thk alum.-6.75-____-
Post Top Tenon:_____ TN2.88/2.50- 2 7/8” Dia.. x 2 1/2” Ht._____ TN2.88/3.00- 2 7/8” Dia.. x 3” Ht._____ TN3.50/3.00- 3 1/2” Dia.. x 3” H_____ TNXX/XX- Other, please specify: ________” Dia.. x ________” Ht.
Accessories: (See Accessorie Section)
Anchor Bolts:_____ 323/ 3/4” x 24” _____ 124/ 1” x 24” _____ 136/ 1” x 36”_____ 330/ 3/4” x 30” _____ 130/ 1” x 30” _____ 140/ 1” x 40”_____ XXX/ Other _____ 999/ Not required_____ 1NW- 1Nut & Washer / Bolt _____ 2NW- 2 Nuts & Washers / Bolt
Coatings (Paint Finish - For detailed information, see Finish in the Specification Section):_____ PO Prime Paint _____ CB Finish Classic Black_____ BG Finish Bottle Green _____ DB Finish Dark Bronze_____ LB Finish Long Beach Blue _____ GI Finish Grey Iron_____ VG Finish Verde Green _____ CW Finish Custom Wet_____ CU Finish Custom Powder Coat _____ XX Other_____ GV Galvanized _____ UF Unfinished
Sylvania - Bi-Metal cast base and fabricatedcolumn.
SPRING CITY ELECTRICAL MFG. CO., INC.Hall & Main Streets, P. O. Box 19Spring City, PA 19475-0019Phone: 610-948-4000 Fax: 610-948-5577Website: www.springci ty.com
Page: BP 72
6”, 7” or 9” Dia.as determinedby columndiam.
7” Dia.
AccessDoor
20” Dia.
Max. ht.30’-0”
20” Diameter
11 3/4”
7 1/2” O. D. of Steel Shaft12” Diameter Bolt Circle
CL of Hand Hole and Access Door
(4) Slotted openings to accommodateanchor bolts
3’-1”
SPRING CITY ELECTRICAL MFG. CO., INHall & Main Streets, P. O. Box 19Spring City, PA 19475-0019Phone: 610-948-4000 Fax: 610-948-5577Website: www.springci ty.com
Page: BP 73
Quality Hill Bi-Metal Post14” One Piece Slip Base
S p e c i f i c a t i o n
Description
The Quality Hill Bi-Metal post consists of a cast base uin combination with a fabricated column. The fabriccolumn mounts to the foundation at grade and carriesstructural load. The cast base serves both a decorativeprotective function.
Post Material
The base is a heavy wall metal casting available in giron per ASTM A48, ductile Iron per ASTM A536 aluminum per ASTM B26-95 Alloy SR356. The fabried column is tapered at 0.14” per foot and is availablvariable heights. The column can be supplied eismooth or with vertical flutes in patterns of 8 sharp, 12and 16 sharp. Steel columns are available in 11 angauge as standard with other wall thicknesses availupon request. Aluminum column wall thickness rafrom 0.125” to 0.25” with other thicknesses availupon request or as determined by application. For mordepth information on materials, please refer to Materiathe Accessories Section.
Dimensions
Available post heights range from 10’-19’ in incrementsmall as 1”. The cast base has a square cross section wa base dimension of 14”. The fabricated shaft has a bplate with four slotted openings for anchor bolts and ofa standard bolt circle of 12”. Other bolt circles are avable upon request. Tenon size is variable and based uapplication.
Installation
A single access door is located in the base to provaccess to the anchor bolts. The door in the base coincwith the hand hole opening in the column for wiaccess. Opposite the hand hole opening inside the coluare a 1/4-20 nut provisions for a ground lug, by othAnchor bolts supplied are per ASTM A36M G55 andfully hot dip galvanized to ASTM A153.
Catalog No.: QLT-1419’-0”
14’-0”
10’-0”
Ordering GuideCast Base Example: ISBQLT-14-CB (Cast Iron Slip Base Quality Hill -14” Sq.Base-Finish Classic Black)
Material Base: Base Configuration:_____ I Cast Iron_____ D Cast Ductile Iron _____SB Slip Base QLT-14-(coatings see below)_____ A Cast Aluminum
Column Example: SSH8S-G11-5.00-19-TN2.88/3.00-323/2NW-CB (SteelShaft 8 Flute-11 Gauge-5.00 Shaft Dia.-19’ Ht.-Tenon 2 7/8” Dia. x 3” Ht.-3/4”x 24” Anchor Bolts / 2 Nuts & Washers per anchor bolt-Finish Classic Black)
Material Column:_____ SSH Steel Shaft _____ ASH Aluminum Shaft
Column Configuration:_____SS Smooth Straight _____ST Smooth Tapered_____8S 8 Sharp Flute _____E3 3.5” Fluted Aluminum_____2F 12 Flat Flute _____E5 5.0” Fluted Aluminum _____6S 16 Sharp Flute _____H5 5.0” Fluted Heavy Wall Aluminum_____OC Octagonal _____E8 8.0” Fluted Aluminum
Column Thickness-Shaft Diameter at Grade-Height (max ht. 19’-0”):_____G11 11 Gauge-5.0-____- _____SC4 Schedule 40-X.X-____ -_____G17 7 Gauge- 5.0-____- _____SC8 Schedule 80-X.X-____-_____G24 3 Gauge- 5.0-____-_____A12 .125”thk alum.-6.75-____- _____A18 .188”thk alum.-6.75-____-_____A20 .200”thk alum.-6.75-____- _____A25 .250”thk alum.-6.75-____-
Post Top Tenon:_____ TN2.88/2.50- 2 7/8” Dia.. x 2 1/2” Ht._____ TN2.88/3.00- 2 7/8” Dia.. x 3” Ht._____ TN3.50/3.00- 3 1/2” Dia.. x 3” H_____ TNXX/XX- Other, please specify: ________” Dia.. x ________” Ht.
Accessories: (See Accessorie Section)
Anchor Bolts:_____ 323/ 3/4” x 24” _____ 124/ 1” x 24” _____ 136/ 1” x 36”_____ 330/ 3/4” x 30” _____ 130/ 1” x 30” _____ 140/ 1” x 40”_____ XXX/ Other _____ 999/ Not required_____ 1NW- 1Nut & Washer / Bolt _____ 2NW- 2 Nuts & Washers / Bolt
Coatings (Paint Finish - For detailed information, see Finish in the Specification Section):_____ PO Prime Paint _____ CB Finish Classic Black_____ BG Finish Bottle Green _____ DB Finish Dark Bronze_____ LB Finish Long Beach Blue _____ GI Finish Grey Iron_____ VG Finish Verde Green _____ CW Finish Custom Wet_____ CU Finish Custom Powder Coat _____ XX Other_____ GV Galvanized _____ UF Unfinished
Quality Hill - Bi-Metal cast base and fabri-cated column. One piece all cast material ver-sion of this style available, see the LightingPost - Cast Section
SPRING CITY ELECTRICAL MFG. CO., INC.Hall & Main Streets, P. O. Box 19Spring City, PA 19475-0019Phone: 610-948-4000 Fax: 610-948-5577Website: www.springci ty.com
Page: BP 74
6”, 7” or 9”Dia. as deter-mined by col-umn diam.
Max. ht.19’-0”
4 1/2” Dia.
AccessDoor
14” Sq.
14” Square
11 3/4”
5” O. D. of Steel Shaft
12” Diameter Bolt Circle
CL of Hand Hole and Access Door
(4) Slotted openings to accommodateanchor bolts
3’-6 3/4”
SPRING CITY ELECTRICAL MFG. CO., INHall & Main Streets, P. O. Box 19Spring City, PA 19475-0019Phone: 610-948-4000 Fax: 610-948-5577Website: www.springci ty.com
Page: BP 75
Homes Bi-Metal Post17” Two Piece Wrap Base
S p e c i f i c a t i o n
Description
The Homes Bi-Metal post consists of a cast base usecombination with a fabricated column. The fabriccolumn mounts to the foundation at grade and carriesstructural load. The cast base serves both a decorativeprotective function.
Post Material
The base is a heavy wall metal casting available in giron per ASTM A48, ductile Iron per ASTM A536 aluminum per ASTM B26-95 Alloy SR356. The fabried column is tapered at 0.14” per foot and is availablvariable heights. The column can be supplied eismooth or with vertical flutes in patterns of 8 sharp, 12and 16 sharp. Steel columns are available in 11 angauge as standard with other wall thicknesses availupon request. Aluminum column wall thickness rafrom 0.125” to 0.25” with other thicknesses availupon request or as determined by application. For mordepth information on materials, please refer to Materiathe Accessories Section.
Dimensions
Available post heights range from 10’ to 30’ in incremas small as 1”. The cast base has an octagonal cross tion with a base dimension of 17”. The fabricated shas a base plate with four slotted openings for anchor band offers a standard bolt circle of 11”. Other bolt cirare available upon request. Tenon size is variable based upon application.
Installation
The base is supplied as a two piece clam shell to access to the anchor bolts. It also allows access to the hhole opening in the column for wiring. Opposite the hhole opening inside the column are a 1/4-20 nut provisfor a ground lug, by others. Anchor bolts supplied areASTM A36M G55 and are fully hot dip galvanizeASTM A153.
Catalog No.: HMS-1730’-0”
20’-0”
10’-0”
Ordering GuideCast Base Example: IWBHMS-17-CB (Cast Iron Wrap Base Homes-17” Oct.Base-Finish Classic Black)
Material Base: Base Configuration:_____ I Cast Iron_____ D Cast Ductile Iron _____WB Wrap Base WLB-17-(coatings see below)_____ A Cast Aluminum
Column Example: SSHSS-G11-8.00-30-TN2.88/3.00-130/2NW-CB (Steel Shaft SmoothStraight-11 Gauge-8.00 Shaft Dia.-30’ Ht.-Tenon 2 7/8” Dia. x 3” Ht.-1” x 30” AnchorBolts / 2 Nuts & Washers per anchor bolt-Finish Classic Black)
Material Column:_____ SSH Steel Shaft _____ ASH Aluminum Shaft
Column Configuration:_____SS Smooth Straight _____ST Smooth Tapered_____8S 8 Sharp Flute _____E3 3.5” Fluted Aluminum_____2F 12 Flat Flute _____E5 5.0” Fluted Aluminum _____6S 16 Sharp Flute _____H5 5.0” Fluted Heavy Wall Aluminum_____OC Octagonal _____E8 8.0” Fluted Aluminum
Column Thickness-Shaft Diameter at Grade-Height (max ht. 30’-0”):_____G11 11 Gauge-8.0-____- _____SC4 Schedule 40-X.X-____ -_____G17 7 Gauge- 8.0-____- _____SC8 Schedule 80-X.X-____-_____G24 3 Gauge- 8.0-____-_____A12 .125”thk alum.-6.75-____- _____A18 .188”thk alum.-6.75-____-_____A20 .200”thk alum.-6.75-____- _____A25 .250”thk alum.-6.75-____-
Post Top Tenon:_____ TN2.88/2.50- 2 7/8” Dia.. x 2 1/2” Ht._____ TN2.88/3.00- 2 7/8” Dia.. x 3” Ht._____ TN3.50/3.00- 3 1/2” Dia.. x 3” H_____ TNXX/XX- Other, please specify: ________” Dia.. x ________” Ht.
Accessories: (See Accessorie Section)
Anchor Bolts:_____ 323/ 3/4” x 24” _____ 124/ 1” x 24” _____ 136/ 1” x 36”_____ 330/ 3/4” x 30” _____ 130/ 1” x 30” _____ 140/ 1” x 40”_____ XXX/ Other _____ 999/ Not required_____ 1NW- 1Nut & Washer / Bolt _____ 2NW- 2 Nuts & Washers / Bolt
Coatings (Paint Finish - For detailed information, see Finish in the Specification Section):_____ PO Prime Paint _____ CB Finish Classic Black_____ BG Finish Bottle Green _____ DB Finish Dark Bronze_____ LB Finish Long Beach Blue _____ GI Finish Grey Iron_____ VG Finish Verde Green _____ CW Finish Custom Wet_____ CU Finish Custom Powder Coat _____ XX Other_____ GV Galvanized _____ UF Unfinished
Homes - Bi-Metal cast base and fabricatedcolumn.
SPRING CITY ELECTRICAL MFG. CO., INC.Hall & Main Streets, P. O. Box 19Spring City, PA 19475-0019Phone: 610-948-4000 Fax: 610-948-5577Website: www.springci ty.com
Page: BP 76
6”, 7” or 9”Dia. as deter-mined by col-umn diam.
Max. ht.30’-0”
7 5/8” Dia.
17” Oct.
17” Octagonal
11”
8” O. D. of Steel Shaft
11” Diameter Bolt Circle
(4) Slotted openings to accommodateanchor bolts
AccessDoor
SPRING CITY ELECTRICAL MFG. CO., INHall & Main Streets, P. O. Box 19Spring City, PA 19475-0019Phone: 610-948-4000 Fax: 610-948-5577Website: www.springci ty.com
Page: BP 77
Willard Bi-Metal Post22” One Piece Slip Base
S p e c i f i c a t i o n
Description
The Willard Bi-Metal post consists of a cast base usecombination with a fabricated column. The fabriccolumn mounts to the foundation at grade and carriesstructural load. The cast base serves both a decorativeprotective function.
Post Material
The base is a heavy wall metal casting available in giron per ASTM A48, ductile Iron per ASTM A536 aluminum per ASTM B26-95 Alloy SR356. The fabried column is tapered at 0.14” per foot and is availablvariable heights. The column can be supplied eismooth or with vertical flutes in patterns of 8 sharp, 12and 16 sharp. Steel columns are available in 11 angauge as standard with other wall thicknesses availupon request. Aluminum column wall thickness rafrom 0.125” to 0.25” with other thicknesses availupon request or as determined by application. For mordepth information on materials, please refer to Materiathe Accessories Section.
Dimensions
Available post heights range from 10’ to 26’ in incremas small as 1”. The cast base has a square cross secwith a base dimension of 22”. The fabricated shaft hbase plate with four slotted openings for anchor bolts offers a standard bolt circle of 12”. Other bolt circlesavailable upon request. Tenon size is variable and baupon application.
Installation
A single access door is located in the base to provaccess to the anchor bolts. The door in the base coincwith the hand hole opening in the column for wiaccess. Opposite the hand hole opening inside the coluare a 1/4-20 nut provisions for a ground lug, by othAnchor bolts supplied are per ASTM A36M G55 andfully hot dip galvanized to ASTM A153.
Catalog No.: WLD-2226’-0”
18’-0”
10’-0”
Ordering GuideCast Base Example: ISBWLD-22-CB (Cast Iron Slip Base Willard-22” Sq.Base-Finish Classic Black)
Material Base: Base Configuration:_____ I Cast Iron_____ D Cast Ductile Iron _____SB Slip Base WLD-22-(coatings see below)_____ A Cast Aluminum
Column Example: SSH2F-G11-7.00-26-TN2.88/3.00-130/2NW-CB (SteelShaft 12 Flute-11 Gauge-7.00 Shaft Dia.-26’ Ht.-Tenon 2 7/8” Dia. x 3” Ht.-1”x 30” Anchor Bolts / 2 Nuts & Washers per anchor bolt-Finish Classic Black)
Material Column:_____ SSH Steel Shaft _____ ASH Aluminum Shaft
Column Configuration:_____SS Smooth Straight _____ST Smooth Tapered_____8S 8 Sharp Flute _____E3 3.5” Fluted Aluminum_____2F 12 Flat Flute _____E5 5.0” Fluted Aluminum _____6S 16 Sharp Flute _____H5 5.0” Fluted Heavy Wall Aluminum_____OC Octagonal _____E8 8.0” Fluted Aluminum
Column Thickness-Shaft Diameter at Grade-Height (max ht. 26’-0”):_____G11 11 Gauge-7.0-____- _____SC4 Schedule 40-X.X-____ -_____G17 7 Gauge- 7.0-____- _____SC8 Schedule 80-X.X-____-_____G24 3 Gauge-7.0-____-_____A12 .125”thk alum.-6.75-____- _____A18 .188”thk alum.-6.75-____-_____A20 .200”thk alum.-6.75-____- _____A25 .250”thk alum.-6.75-____-
Post Top Tenon:_____ TN2.88/2.50- 2 7/8” Dia.. x 2 1/2” Ht._____ TN2.88/3.00- 2 7/8” Dia.. x 3” Ht._____ TN3.50/3.00- 3 1/2” Dia.. x 3” H_____ TNXX/XX- Other, please specify: ________” Dia.. x ________” Ht.
Accessories: (See Accessorie Section)
Anchor Bolts:_____ 323/ 3/4” x 24” _____ 124/ 1” x 24” _____ 136/ 1” x 36”_____ 330/ 3/4” x 30” _____ 130/ 1” x 30” _____ 140/ 1” x 40”_____ XXX/ Other _____ 999/ Not required_____ 1NW- 1Nut & Washer / Bolt _____ 2NW- 2 Nuts & Washers / Bolt
Coatings (Paint Finish - For detailed information, see Finish in the Specification Section):_____ PO Prime Paint _____ CB Finish Classic Black_____ BG Finish Bottle Green _____ DB Finish Dark Bronze_____ LB Finish Long Beach Blue _____ GI Finish Grey Iron_____ VG Finish Verde Green _____ CW Finish Custom Wet_____ CU Finish Custom Powder Coat _____ XX Other_____ GV Galvanized _____ UF Unfinished
Willard- Bi-Metal cast base and fabricatedcolumn. One piece all cast material version ofthis style available, see the Lighting Post - CastSection
SPRING CITY ELECTRICAL MFG. CO., INC.Hall & Main Streets, P. O. Box 19Spring City, PA 19475-0019Phone: 610-948-4000 Fax: 610-948-5577Website: www.springci ty.com
Page: BP 78
6”, 7” or 9”Dia. as deter-mined bycolumn diam.
6 3/4” Dia.
Max. ht.26’-0”
AccessDoor
22” Sq.
22” Square
11 3/4”
(4) Slotted openings to accommodateanchor bolts
7” O. D. of Steel Shaft
12” Diameter Bolt Circle
CL of Hand Hole and Access Door
2’-3 1/2”
SPRING CITY ELECTRICAL MFG. CO., INHall & Main Streets, P. O. Box 19Spring City, PA 19475-0019Phone: 610-948-4000 Fax: 610-948-5577Website: www.springci ty.com
Page: BP 79
Lechmere Bi-Metal Post19” Two Piece Wrap Base
S p e c i f i c a t i o n
Description
The Lechmere Bi-Metal post consists of a cast base uin combination with a fabricated column. The fabriccolumn mounts to the foundation at grade and carriesstructural load. The cast base serves both a decorativeprotective function.
Post Material
The base is a heavy wall metal casting available in giron per ASTM A48, ductile Iron per ASTM A536 aluminum per ASTM B26-95 Alloy SR356. The fabried column is tapered at 0.14” per foot and is availablvariable heights. The column can be supplied eismooth or with vertical flutes in patterns of 8 sharp, 12and 16 sharp. Steel columns are available in 11 angauge as standard with other wall thicknesses availupon request. Aluminum column wall thickness rafrom 0.125” to 0.25” with other thicknesses availupon request or as determined by application. For mordepth information on materials, please refer to Materiathe Accessories Section.
Dimensions
Available post heights range from 10’ to 30’ in incremas small as 1”. The cast base has a round cross secwith a base diameter of 19”. The fabricated shaft hbase plate with four slotted openings for anchor bolts offers a standard bolt circle of 10”. Other bolt circlesavailable upon request. Tenon size is variable and baupon application.
Installation
A single access door is located in the base to provaccess to the anchor bolts. The door in the base coincwith the hand hole opening in the column for wiaccess. Opposite the hand hole opening inside the coluare a 1/4-20 nut provisions for a ground lug, by othAnchor bolts supplied are per ASTM A36M G55 andfully hot dip galvanized to ASTM A153.
Catalog No.: LCH-1930’-0”
20’-0”
10’-0”
Ordering GuideCast Base Example: IWBLCH-19-CB (Cast Iron Wrap Base Lechmere-19”Dia. Base-Finish Classic Black)
Material Base: Base Configuration:_____ I Cast Iron_____ D Cast Ductile Iron _____WB Wrap Base LCH-19-(coatings see below)_____ A Cast Aluminum
Column Example: SSHST-G11-7.50-30-TN2.88/3.00-130/2NW-CB (SteelShaft Smooth Tapered-11 Gauge-7.50 Shaft Dia.-30’ Ht.-Tenon 2 7/8” Dia. x3” Ht.-1” x 30” Anchor Bolts / 2 Nuts & Washers per anchor bolt-Finish Classic Black)
Material Column:_____ SSH Steel Shaft _____ ASH Aluminum Shaft
Column Configuration:_____SS Smooth Straight _____ST Smooth Tapered_____8S 8 Sharp Flute _____E3 3.5” Fluted Aluminum_____2F 12 Flat Flute _____E5 5.0” Fluted Aluminum _____6S 16 Sharp Flute _____H5 5.0” Fluted Heavy Wall Aluminum_____OC Octagonal _____E8 8.0” Fluted Aluminum
Column Thickness-Shaft Diameter at Grade-Height (max ht. 30’-0”):_____G11 11 Gauge-7.5-____- _____SC4 Schedule 40-X.X-____ -_____G17 7 Gauge- 7.5-____- _____SC8 Schedule 80-X.X-____-_____G24 3 Gauge- 7.5-____-_____A12 .125”thk alum.-6.75-____- _____A18 .188”thk alum.-6.75-____-_____A20 .200”thk alum.-6.75-____- _____A25 .250”thk alum.-6.75-____-
Post Top Tenon:_____ TN2.88/2.50- 2 7/8” Dia.. x 2 1/2” Ht._____ TN2.88/3.00- 2 7/8” Dia.. x 3” Ht._____ TN3.50/3.00- 3 1/2” Dia.. x 3” H_____ TNXX/XX- Other, please specify: ________” Dia.. x ________” Ht.
Accessories: (See Accessorie Section)
Anchor Bolts:_____ 323/ 3/4” x 24” _____ 124/ 1” x 24” _____ 136/ 1” x 36”_____ 330/ 3/4” x 30” _____ 130/ 1” x 30” _____ 140/ 1” x 40”_____ XXX/ Other _____ 999/ Not required_____ 1NW- 1Nut & Washer / Bolt _____ 2NW- 2 Nuts & Washers / Bolt
Coatings (Paint Finish - For detailed information, see Finish in the Specification Section):_____ PO Prime Paint _____ CB Finish Classic Black_____ BG Finish Bottle Green _____ DB Finish Dark Bronze_____ LB Finish Long Beach Blue _____ GI Finish Grey Iron_____ VG Finish Verde Green _____ CW Finish Custom Wet_____ CU Finish Custom Powder Coat _____ XX Other_____ GV Galvanized _____ UF Unfinished
Lechmere - Bi-Metal cast base and fabricatedcolumn.
SPRING CITY ELECTRICAL MFG. CO., INC.Hall & Main Streets, P. O. Box 19Spring City, PA 19475-0019Phone: 610-948-4000 Fax: 610-948-5577Website: www.springci ty.com
Page: BP 80
6”, 7” or9” Dia. asdeterminedby columndiam.
7” Dia.
Max. ht.30’-0”
AccessDoor
19” Dia.
19” Diameter
11 3/4”
7 1/2” O. D. of Steel Shaft
10” Diameter Bolt Circle
CL of Hand Hole and Access Door
(4) Slotted openings to accommodateanchor bolts
3’-0”
SPRING CITY ELECTRICAL MFG. CO., INHall & Main Streets, P. O. Box 19Spring City, PA 19475-0019Phone: 610-948-4000 Fax: 610-948-5577Website: www.springci ty.com
Page: BP 81
Reynolds House Bi-Metal Post13” One Piece Slip Base
S p e c i f i c a t i o n
Description
The Reynolds House Bi-Metal post consists of a cast bused in combination with a fabricated column. The facated column mounts to the foundation at grade and ries the structural load. The cast base serves both a drative and protective function.
Post Material
The base is a heavy wall metal casting available in giron per ASTM A48, ductile Iron per ASTM A536 aluminum per ASTM B26-95 Alloy SR356. The fabried column is tapered at 0.14” per foot and is availablvariable heights. The column can be supplied eismooth or with vertical flutes in patterns of 8 sharp, 12and 16 sharp. Steel columns are available in 11 angauge as standard with other wall thicknesses availupon request. Aluminum column wall thickness rafrom 0.125” to 0.25” with other thicknesses availupon request or as determined by application. For mordepth information on materials, please refer to Materiathe Accessories Section.
Dimensions
Available post heights range from 10’ to 19’ in incremas small as 1”. The cast base has a square cross secwith a base dimension of 13”. The fabricated shaft hbase plate with four slotted openings for anchor bolts offers a standard bolt circle of 12 1/2”. Other bolt cirare available upon request. Tenon size is variable based upon application.
Installation
The door in the base coincides with the hand hole openin the column for wiring access. Opposite the hand hopening inside the column are a 1/4-20 nut provisionsa ground lug, by others. Anchor bolts supplied areASTM A36M G55 and are fully hot dip galvanizeASTM A153.
Catalog No.: RYN-1319’-0”
14’-0”
10’-0”
Ordering GuideCast Base Example: ISBRYN-13-CB (Cast Iron Slip Base Reynolds House-13”Sq. Base-Finish Classic Black)
Material Base: Base Configuration:_____ I Cast Iron_____ D Cast Ductile Iron _____SB Slip Base RYN-13-(coatings see below)_____ A Cast Aluminum
Column Example: SSHST-G11-6.0-19-TN2.88/3.00-332/2NW-CB (Steel ShaftSmooth Tapered-11 Gauge-6.0 Shaft Dia.-19’ Ht.-Tenon 2 7/8” Dia. x 3” Ht.-3/4” x 24” Anchor Bolts / 2 Nuts & Washers per anchor bolt-Finish Classic Black)
Material Column:_____ SSH Steel Shaft _____ ASH Aluminum Shaft
Column Configuration:_____SS Smooth Straight _____ST Smooth Tapered_____8S 8 Sharp Flute _____E3 3.5” Fluted Aluminum_____2F 12 Flat Flute _____E5 5.0” Fluted Aluminum _____6S 16 Sharp Flute _____H5 5.0” Fluted Heavy Wall Aluminum_____OC Octagonal _____E8 8.0” Fluted Aluminum
Column Thickness-Shaft Diameter at Grade-Height (max ht. 19’-0”):_____G11 11 Gauge-6.0-____- _____SC4 Schedule 40-X.X-____ -_____G17 7 Gauge- 6.0-____- _____SC8 Schedule 80-X.X-____-_____G24 3 Gauge- 6.0-____-_____A12 .125”thk alum.-6.75-____- _____A18 .188”thk alum.-6.75-____-_____A20 .200”thk alum.-6.75-____- _____A25 .250”thk alum.-6.75-____-
Post Top Tenon:_____ TN2.88/2.50- 2 7/8” Dia.. x 2 1/2” Ht._____ TN2.88/3.00- 2 7/8” Dia.. x 3” Ht._____ TN3.50/3.00- 3 1/2” Dia.. x 3” H_____ TNXX/XX- Other, please specify: ________” Dia.. x ________” Ht.
Accessories: (See Accessorie Section)
Anchor Bolts:_____ 323/ 3/4” x 24” _____ 124/ 1” x 24” _____ 136/ 1” x 36”_____ 330/ 3/4” x 30” _____ 130/ 1” x 30” _____ 140/ 1” x 40”_____ XXX/ Other _____ 999/ Not required_____ 1NW- 1Nut & Washer / Bolt _____ 2NW- 2 Nuts & Washers / Bolt
Coatings (Paint Finish - For detailed information, see Finish in the Specification Section):_____ PO Prime Paint _____ CB Finish Classic Black_____ BG Finish Bottle Green _____ DB Finish Dark Bronze_____ LB Finish Long Beach Blue _____ GI Finish Grey Iron_____ VG Finish Verde Green _____ CW Finish Custom Wet_____ CU Finish Custom Powder Coat _____ XX Other_____ GV Galvanized _____ UF Unfinished
Reynolds House - Bi-Metal cast base andfabricated column.
SPRING CITY ELECTRICAL MFG. CO., INC.Hall & Main Streets, P. O. Box 19Spring City, PA 19475-0019Phone: 610-948-4000 Fax: 610-948-5577Website: www.springci ty.com
Page: BP 82
Max. ht.19’-0”
6”, 7” or 9”Dia. asdeterminedby columndiam.
5 7/8” Dia.
Access Door
13” Sq.
13” Square
6” O. D. of Steel Shaft
Slip Over Base
12 1/2” Diameter Bolt Circle
CL of Hand Hole and Access Door
(4) Openings to accommodateanchor bolts
1’-0”
SPRING CITY ELECTRICAL MFG. CO., INHall & Main Streets, P. O. Box 19Spring City, PA 19475-0019Phone: 610-948-4000 Fax: 610-948-5577Website: www.springci ty.com
Page: BP 83
Cambridge Bi-Metal Post17” Two Piece Wrap Base
S p e c i f i c a t i o n
Description
The Cambridge Bi-Metal post consists of a cast base uin combination with a fabricated column. The fabriccolumn mounts to the foundation at grade and carriesstructural load. The cast base serves both a decorativeprotective function.
Post Material
The base is a heavy wall metal casting available in giron per ASTM A48, ductile Iron per ASTM A536 aluminum per ASTM B26-95 Alloy SR356. The fabried column is tapered at 0.14” per foot and is availablvariable heights. The column can be supplied eismooth or with vertical flutes in patterns of 8 sharp, 12and 16 sharp. Steel columns are available in 11 angauge as standard with other wall thicknesses availupon request. Aluminum column wall thickness rafrom 0.125” to 0.25” with other thicknesses availupon request or as determined by application. For mordepth information on materials, please refer to Materiathe Accessories Section.
Dimensions
Available post heights range from 10’ to 26’ in incremas small as 1”. The cast base has a round cross secwith a base diameter of 17”. The fabricated shaft hbase plate with four slotted openings for anchor bolts offers a standard bolt circle of 12”. Other bolt circlesavailable upon request. Tenon size is variable and baupon application.
Installation
A single access door is located in the base to provaccess to the anchor bolts. The door in the base coincwith the hand hole opening in the column for wiaccess. Opposite the hand hole opening inside the coluare a 1/4-20 nut provisions for a ground lug, by othAnchor bolts supplied are per ASTM A36M G55 andfully hot dip galvanized to ASTM A153.
Catalog No.: CMB-1726’-0”
18’-0”
10’-0”
Ordering GuideCast Base Example: IWBCMB-17-CB (Cast Iron Wrap Base Cambridge-17”Dia. Base-Finish Classic Black)
Material Base: Base Configuration:_____ I Cast Iron_____ D Cast Ductile Iron _____WB Wrap Base CMB-17-(coatings see below)_____ A Cast Aluminum
Column Example: SSHST-G11-7.0-26-TN2.88/3.00-130/2NW-CB (Steel ShaftSmooth Tapered-11 Gauge-7.0 Shaft Dia.-26’ Ht.-Tenon 2 7/8” Dia. x 3” Ht.-1”x 30” Anchor Bolts / 2 Nuts & Washers per anchor bolt-Finish Classic Black)
Material Column:_____ SSH Steel Shaft _____ ASH Aluminum Shaft
Column Configuration:_____SS Smooth Straight _____ST Smooth Tapered_____8S 8 Sharp Flute _____E3 3.5” Fluted Aluminum_____2F 12 Flat Flute _____E5 5.0” Fluted Aluminum _____6S 16 Sharp Flute _____H5 5.0” Fluted Heavy Wall Aluminum_____OC Octagonal _____E8 8.0” Fluted Aluminum
Column Thickness-Shaft Diameter at Grade-Height (max ht. 26’-0”):_____G11 11 Gauge-7.0-____- _____SC4 Schedule 40-X.X-____ -_____G17 7 Gauge- 7.0-____- _____SC8 Schedule 80-X.X-____-_____G24 3 Gauge- 7.0-____-_____A12 .125”thk alum.-6.75-____- _____A18 .188”thk alum.-6.75-____-_____A20 .200”thk alum.-6.75-____- _____A25 .250”thk alum.-6.75-____-
Post Top Tenon:_____ TN2.88/2.50- 2 7/8” Dia.. x 2 1/2” Ht._____ TN2.88/3.00- 2 7/8” Dia.. x 3” Ht._____ TN3.50/3.00- 3 1/2” Dia.. x 3” H_____ TNXX/XX- Other, please specify: ________” Dia.. x ________” Ht.
Accessories: (See Accessorie Section)
Anchor Bolts:_____ 323/ 3/4” x 24” _____ 124/ 1” x 24” _____ 136/ 1” x 36”_____ 330/ 3/4” x 30” _____ 130/ 1” x 30” _____ 140/ 1” x 40”_____ XXX/ Other _____ 999/ Not required_____ 1NW- 1Nut & Washer / Bolt _____ 2NW- 2 Nuts & Washers / Bolt
Coatings (Paint Finish - For detailed information, see Finish in the Specification Section):_____ PO Prime Paint _____ CB Finish Classic Black_____ BG Finish Bottle Green _____ DB Finish Dark Bronze_____ LB Finish Long Beach Blue _____ GI Finish Grey Iron_____ VG Finish Verde Green _____ CW Finish Custom Wet_____ CU Finish Custom Powder Coat _____ XX Other_____ GV Galvanized _____ UF Unfinished
Cambridge - Bi-Metal cast base and fabricat-ed column.
SPRING CITY ELECTRICAL MFG. CO., INC.Hall & Main Streets, P. O. Box 19Spring City, PA 19475-0019Phone: 610-948-4000 Fax: 610-948-5577Website: www.springci ty.com
Page: BP 84
6”, 7” or 9”Dia. asdeterminedby columndiam.
Max. ht.26’-0”
6 5/8” Dia.
AccessDoor
17” Dia.
17” Diameter
11 3/4”
7” O. D. of Steel Shaft
12” Diameter Bolt Circle
CL of Hand Hole and Access Door
(4) Slotted openings to accommodateanchor bolts
2’-9”
SPRING CITY ELECTRICAL MFG. CO., INHall & Main Streets, P. O. Box 19Spring City, PA 19475-0019Phone: 610-948-4000 Fax: 610-948-5577Website: www.springci ty.com
Page: BP 85
Cambridge Bi-Metal Post20” Two Piece Wrap Base
S p e c i f i c a t i o n
Description
The Cambridge Bi-Metal post consists of a cast base uin combination with a fabricated column. The fabriccolumn mounts to the foundation at grade and carriesstructural load. The cast base serves both a decorativeprotective function.
Post Material
The base is a heavy wall metal casting available in giron per ASTM A48, ductile Iron per ASTM A536 aluminum per ASTM B26-95 Alloy SR356. The fabried column is tapered at 0.14” per foot and is availablvariable heights. The column can be supplied eismooth or with vertical flutes in patterns of 8 sharp, 12and 16 sharp. Steel columns are available in 11 angauge as standard with other wall thicknesses availupon request. Aluminum column wall thickness rafrom 0.125” to 0.25” with other thicknesses availupon request or as determined by application. For mordepth information on materials, please refer to Materiathe Accessories Section.
Dimensions
Available post heights range from 10’ to 30’ in incremas small as 1”. The cast base has a round cross secwith a base diameter of 20”. The fabricated shaft hbase plate with four slotted openings for anchor bolts offers a standard bolt circle of 12”. Other bolt circlesavailable upon request. Tenon size is variable and baupon application.
Installation
A single access door is located in the base to provaccess to the anchor bolts. The door in the base coincwith the hand hole opening in the column for wiaccess. Opposite the hand hole opening inside the coluare a 1/4-20 nut provisions for a ground lug, by othAnchor bolts supplied are per ASTM A36M G55 andfully hot dip galvanized to ASTM A153.
Catalog No.: CMB-2030’-0”
20’-0”
10’-0”
Ordering GuideCast Base Example: IWBCMB-20-CB (Cast Iron Wrap Base Cambridge-20”Dia. Base-Finish Classic Black)
Material Base: Base Configuration:_____ I Cast Iron_____ D Cast Ductile Iron _____WB Wrap Base CMB-20-(coatings see below)_____ A Cast Aluminum
Column Example: SSHST-G11-8.50-30-TN2.88/3.00-130/2NW-CB (SteelShaft Smooth Tapered-11 Gauge-8.50 Shaft Dia.-30’ Ht.-Tenon 2 7/8” Dia. x3” Ht.-1” x 30” Anchor Bolts / 2 Nuts & Washers per anchor bolt-Finish Classic Black)
Material Column:_____ SSH Steel Shaft _____ ASH Aluminum Shaft
Column Configuration:_____SS Smooth Straight _____ST Smooth Tapered_____8S 8 Sharp Flute _____E3 3.5” Fluted Aluminum_____2F 12 Flat Flute _____E5 5.0” Fluted Aluminum _____6S 16 Sharp Flute _____H5 5.0” Fluted Heavy Wall Aluminum_____OC Octagonal _____E8 8.0” Fluted Aluminum
Column Thickness-Shaft Diameter at Grade-Height (max ht. 30’-0”):_____G11 11 Gauge-8.5-____- _____SC4 Schedule 40-X.X -____ -_____G17 7 Gauge- 8.5-____- _____SC8 Schedule 80-X.X-____-_____G24 3 Gauge- 8.5-____-_____A12 .125”thk alum.-6.75-____- _____A18 .188”thk alum.-6.75-____-_____A20 .200”thk alum.-6.75-____- _____A25 .250”thk alum.-6.75-____-
Post Top Tenon:_____ TN2.88/2.50- 2 7/8” Dia.. x 2 1/2” Ht._____ TN2.88/3.00- 2 7/8” Dia.. x 3” Ht._____ TN3.50/3.00- 3 1/2” Dia.. x 3” H_____ TNXX/XX- Other, please specify: ________” Dia.. x ________” Ht.
Accessories: (See Accessorie Section)
Anchor Bolts:_____ 323/ 3/4” x 24” _____ 124/ 1” x 24” _____ 136/ 1” x 36”_____ 330/ 3/4” x 30” _____ 130/ 1” x 30” _____ 140/ 1” x 40”_____ XXX/ Other _____ 999/ Not required_____ 1NW- 1Nut & Washer / Bolt _____ 2NW- 2 Nuts & Washers / Bolt
Coatings (Paint Finish - For detailed information, see Finish in the Specification Section):_____ PO Prime Paint _____ CB Finish Classic Black_____ BG Finish Bottle Green _____ DB Finish Dark Bronze_____ LB Finish Long Beach Blue _____ GI Finish Grey Iron_____ VG Finish Verde Green _____ CW Finish Custom Wet_____ CU Finish Custom Powder Coat _____ XX Other_____ GV Galvanized _____ UF Unfinished
Cambridge - Bi-Metal cast base and fabricat-ed column.
SPRING CITY ELECTRICAL MFG. CO., INC.Hall & Main Streets, P. O. Box 19Spring City, PA 19475-0019Phone: 610-948-4000 Fax: 610-948-5577Website: www.springci ty.com
Page: BP 86
6”, 7” or 9”Dia. asdeterminedby columndiam.
8” Dia.
AccessDoor
20” Dia.
Max. ht.30’-0”
20” Diameter
11 3/4”
8 1/2” O. D. of Steel Shaft
12” Diameter Bolt Circle
CL of Hand Hole and Access Door
(4) Slotted openings to accommodateanchor bolts
2’-9”
SPRING CITY ELECTRICAL MFG. CO., INHall & Main Streets, P. O. Box 19Spring City, PA 19475-0019Phone: 610-948-4000 Fax: 610-948-5577Website: www.springci ty.com
Page: BP 87
Cambridge Bi-Metal Post23” Two Piece Wrap Base
S p e c i f i c a t i o n
Description
The Cambridge Bi-Metal post consists of a cast base uin combination with a fabricated column. The fabriccolumn mounts to the foundation at grade and carriesstructural load. The cast base serves both a decorativeprotective function.
Post Material
The base is a heavy wall metal casting available in giron per ASTM A48, ductile Iron per ASTM A536 aluminum per ASTM B26-95 Alloy SR356. The fabried column is tapered at 0.14” per foot and is availablvariable heights. The column can be supplied eismooth or with vertical flutes in patterns of 8 sharp, 12and 16 sharp. Steel columns are available in 11 angauge as standard with other wall thicknesses availupon request. Aluminum column wall thickness rafrom 0.125” to 0.25” with other thicknesses availupon request or as determined by application. For mordepth information on materials, please refer to Materiathe Accessories Section.
Dimensions
Available post heights range from 10’ to 30’ in incremas small as 1”. The cast base has a round cross secwith a base diameter of 23”. The fabricated shaft hbase plate with four slotted openings for anchor bolts offers a standard bolt circle of 12 1/2”. Other bolt cirare available upon request. Tenon size is variable based upon application.
Installation
A single access door is located in the base to provaccess to the anchor bolts. The door in the base coincwith the hand hole opening in the column for wiaccess. Opposite the hand hole opening inside the coluare a 1/4-20 nut provisions for a ground lug, by othAnchor bolts supplied are per ASTM A36M G55 andfully hot dip galvanized to ASTM A153.
Catalog No.: CMB-2330’-0”
20’-0”
10’-0”
Ordering GuideCast Base Example: IWBCMB-23-CB (Cast Iron Wrap Base Cambridge-23”Dia. Base-Finish Classic Black)
Material Base: Base Configuration:_____ I Cast Iron_____ D Cast Ductile Iron _____WB Wrap Base CMB-23-(coatings see below)_____ A Cast Aluminum
Column Example: SSHST-G11-9.0-30-TN2.88/3.00-130/2NW-CB (Steel ShaftSmooth Tapered-11 Gauge-9.0 Shaft Dia.-30’ Ht.-Tenon 2 7/8” Dia. x 3” Ht.-1”x 30” Anchor Bolts / 2 Nuts & Washers per anchor bolt-Finish Classic Black)
Material Column:_____ SSH Steel Shaft _____ ASH Aluminum Shaft
Column Configuration:_____SS Smooth Straight _____ST Smooth Tapered_____8S 8 Sharp Flute _____E3 3.5” Fluted Aluminum_____2F 12 Flat Flute _____E5 5.0” Fluted Aluminum _____6S 16 Sharp Flute _____H5 5.0” Fluted Heavy Wall Aluminum_____OC Octagonal _____E8 8.0” Fluted Aluminum
Column Thickness-Shaft Diameter at Grade-Height (max ht. 30’-0”):_____G11 11 Gauge-9.0-____- _____SC4 Schedule 40-X.X-____ -_____G17 7 Gauge- 9.0-____- _____SC8 Schedule 80-X.X-____-_____G24 3 Gauge- 9.0-____-_____A12 .125”thk alum.-6.75-____- _____A18 .188”thk alum.-6.75-____-_____A20 .200”thk alum.-6.75-____- _____A25 .250”thk alum.-6.75-____-
Post Top Tenon:_____ TN2.88/2.50- 2 7/8” Dia.. x 2 1/2” Ht._____ TN2.88/3.00- 2 7/8” Dia.. x 3” Ht._____ TN3.50/3.00- 3 1/2” Dia.. x 3” H_____ TNXX/XX- Other, please specify: ________” Dia.. x ________” Ht.
Accessories: (See Accessorie Section)
Anchor Bolts:_____ 323/ 3/4” x 24” _____ 124/ 1” x 24” _____ 136/ 1” x 36”_____ 330/ 3/4” x 30” _____ 130/ 1” x 30” _____ 140/ 1” x 40”_____ XXX/ Other _____ 999/ Not required_____ 1NW- 1Nut & Washer / Bolt _____ 2NW- 2 Nuts & Washers / Bolt
Coatings (Paint Finish - For detailed information, see Finish in the Specification Section):_____ PO Prime Paint _____ CB Finish Classic Black_____ BG Finish Bottle Green _____ DB Finish Dark Bronze_____ LB Finish Long Beach Blue _____ GI Finish Grey Iron_____ VG Finish Verde Green _____ CW Finish Custom Wet_____ CU Finish Custom Powder Coat _____ XX Other_____ GV Galvanized _____ UF Unfinished
Cambridge - Bi-Metal cast base and fabricat-ed column.
SPRING CITY ELECTRICAL MFG. CO., INC.Hall & Main Streets, P. O. Box 19Spring City, PA 19475-0019Phone: 610-948-4000 Fax: 610-948-5577Website: www.springci ty.com
Page: BP 88
6”, 7” or 9”Dia. asdeterminedby columndiam.
8 5/8” Dia.
Max. ht.30’-0”
AccessDoor
23” Dia.
23” Diameter
13”
9” O. D. of Steel Shaft
12 1/2” Diameter Bolt Circle
CL of Hand Hole and Access Door
(4) Slotted openings to accommodateanchor bolts
2’-9”
SPRING CITY ELECTRICAL MFG. CO., INHall & Main Streets, P. O. Box 19Spring City, PA 19475-0019Phone: 610-948-4000 Fax: 610-948-5577Website: www.springci ty.com
Page: BP 89
Memphis Bi-Metal Post24” Two Piece Wrap Base
S p e c i f i c a t i o n
Description
The Memphis Bi-Metal post consists of a cast base usecombination with a fabricated column. The fabriccolumn mounts to the foundation at grade and carriesstructural load. The cast base serves both a decorativeprotective function.
Post Material
The base is a heavy wall metal casting available in giron per ASTM A48, ductile Iron per ASTM A536 aluminum per ASTM B26-95 Alloy SR356. The fabried column is tapered at 0.14” per foot and is availablvariable heights. The column can be supplied eismooth or with vertical flutes in patterns of 8 sharp, 12and 16 sharp. Steel columns are available in 11 angauge as standard with other wall thicknesses availupon request. Aluminum column wall thickness rafrom 0.125” to 0.25” with other thicknesses availupon request or as determined by application. For mordepth information on materials, please refer to Materiathe Accessories Section.
Dimensions
Available post heights range from 10’ to 26’ in incremas small as 1”. The cast base has an octagonal cross tion with a base dimension of 24 1/2”. The fabricshaft has a base plate with four slotted openings for ancbolts and offers a standard bolt circle of 15”. Other circles are available upon request. Tenon size is variand based upon application.
Installation
A single access door is located in the base to provaccess to the anchor bolts. The door in the base coincwith the hand hole opening in the column for wiaccess. Opposite the hand hole opening inside the coluare a 1/4-20 nut provisions for a ground lug, by othAnchor bolts supplied are per ASTM A36M G55 andfully hot dip galvanized to ASTM A153.
Catalog No.: MMF-24
26’-0”
16’-0”
10’-0”
SPRING CITY ELECTRICAL MFG. CO., INC.Hall & Main Streets, P. O. Box 19Spring City, PA 19475-0019Phone: 610-948-4000 Fax: 610-948-5577Website: www.springci ty.com
Page: BP 90
Ordering GuideCast Base Example: IWBMMF-24-CB (Cast Iron Wrap Base Memphis-24”Oct. Base-Finish Classic Black)
Material Base: Base Configuration:_____ I Cast Iron_____ D Cast Ductile Iron _____WB Wrap Base MMF-24-(coatings see below)_____ A Cast Aluminum
Column Example: SSH2F-G11-8.00-26-TN2.88/3.00-130/2NW-CB (SteelShaft 12 Flute-11 Gauge-8.00 Shaft Dia.-26’ Ht.-Tenon 2 7/8” Dia. x 3” Ht.-1”x 30” Anchor Bolts / 2 Nuts & Washers per anchor bolt-Finish Classic Black)
Material Column:_____ SSH Steel Shaft _____ ASH Aluminum Shaft
Column Configuration:_____SS Smooth Straight _____ST Smooth Tapered_____8S 8 Sharp Flute _____E3 3.5” Fluted Aluminum_____2F 12 Flat Flute _____E5 5.0” Fluted Aluminum _____6S 16 Sharp Flute _____H5 5.0” Fluted Heavy Wall Aluminum_____OC Octagonal _____E8 8.0” Fluted Aluminum
Column Thickness-Shaft Diameter at Grade-Height (max ht. 26’-0”):_____G11 11 Gauge-7.0-____- _____SC4 Schedule 40-X.X-____ -_____G17 7 Gauge- 7.0-____- _____SC8 Schedule 80-X.X-____-_____G24 3 Gauge- 7.0-____-_____A12 .125”thk alum.-6.75-____- _____A18 .188”thk alum.-6.75-____-_____A20 .200”thk alum.-6.75-____- _____A25 .250”thk alum.-6.75-____-
Post Top Tenon:_____ TN2.88/2.50- 2 7/8” Dia.. x 2 1/2” Ht._____ TN2.88/3.00- 2 7/8” Dia.. x 3” Ht._____ TN3.50/3.00- 3 1/2” Dia.. x 3” H_____ TNXX/XX- Other, please specify: ________” Dia.. x ________” Ht.
Accessories: (See Accessorie Section)
Anchor Bolts:_____ 323/ 3/4” x 24” _____ 124/ 1” x 24” _____ 136/ 1” x 36”_____ 330/ 3/4” x 30” _____ 130/ 1” x 30” _____ 140/ 1” x 40”_____ XXX/ Other _____ 999/ Not required_____ 1NW- 1Nut & Washer / Bolt _____ 2NW- 2 Nuts & Washers / Bolt
Coatings (Paint Finish - For detailed information, see Finish in the Specification Section):_____ PO Prime Paint _____ CB Finish Classic Black_____ BG Finish Bottle Green _____ DB Finish Dark Bronze_____ LB Finish Long Beach Blue _____ GI Finish Grey Iron_____ VG Finish Verde Green _____ CW Finish Custom Wet_____ CU Finish Custom Powder Coat _____ XX Other_____ GV Galvanized _____ UF Unfinished
Memphis - Bi-Metal cast base and fabricatedcolumn.
8” Dia.
Max. ht.26’-0”
AccessDoor
24” Oct.
6”, 7” or 9” Dia.as determined bycolumn diam.
24” Octagonal
14”
8” O. D. of Shaft
15” Diameter Bolt Circle
CL of Hand Hole and Access Door
(4) Slotted openings to accommodateanchor bolts
3’-1”
SPRING CITY ELECTRICAL MFG. CO., INHall & Main Streets, P. O. Box 19Spring City, PA 19475-0019Phone: 610-948-4000 Fax: 610-948-5577Website: www.springci ty.com
Page: BP 91
New Frontier Bi-Metal Post24” Two Piece Wrap Base
S p e c i f i c a t i o n
Description
The New Frontier Bi-Metal post consists of a cast bused in combination with a fabricated column. The facated column mounts to the foundation at grade and ries the structural load. The cast base serves both a drative and protective function.
Post Material
The base is a heavy wall metal casting available in giron per ASTM A48, ductile Iron per ASTM A536 aluminum per ASTM B26-95 Alloy SR356. The fabried column is tapered at 0.14” per foot and is availablvariable heights. The column can be supplied eismooth or with vertical flutes in patterns of 8 sharp, 12and 16 sharp. Steel columns are available in 11 angauge as standard with other wall thicknesses availupon request. Aluminum column wall thickness rafrom 0.125” to 0.25” with other thicknesses availupon request or as determined by application. For mordepth information on materials, please refer to Materiathe Accessories Section.
Dimensions
Available post heights range from 10’ to 30’ in incremas small as 1”. The cast base has an octagonal cross tion with a base dimension of 24”. The fabricated shas a base plate with four slotted openings for anchor band offers a standard bolt circle of 12”. Other bolt cirare available upon request. Tenon size is variable based upon application.
Installation
A single access door is located in the base to provaccess to the anchor bolts. The door in the base coincwith the hand hole opening in the column for wiaccess. Opposite the hand hole opening inside the coluare a 1/4-20 nut provisions for a ground lug, by othAnchor bolts supplied are per ASTM A36M G55 andfully hot dip galvanized to ASTM A153.
Catalog No.: NWF-2430’-0”
20’-0”
10’-0”
SPRING CITY ELECTRICAL MFG. CO., INC.Hall & Main Streets, P. O. Box 19Spring City, PA 19475-0019Phone: 610-948-4000 Fax: 610-948-5577Website: www.springci ty.com
Page: BP 92
Ordering GuideCast Base Example: IWBNWF-24-CB (Cast Iron Wrap Base New Frontier-24”Oct. Base-Finish Classic Black)
Material Base: Base Configuration:_____ I Cast Iron_____ D Cast Ductile Iron _____WB Wrap Base NWF-24-(coatings see below)_____ A Cast Aluminum
Column Example: SSH8S-G11-7.50-30-TN2.88/3.00-130/2NW-CB (SteelShaft 8 Flute-11 Gauge-7.50 Shaft Dia.-30’ Ht.-Tenon 2 7/8” Dia. x 3” Ht.-1” x30” Anchor Bolts / 2 Nuts & Washers per anchor bolt-Finish Classic Black)
Material Column:_____ SSH Steel Shaft _____ ASH Aluminum Shaft
Column Configuration:_____SS Smooth Straight _____ST Smooth Tapered_____8S 8 Sharp Flute _____E3 3.5” Fluted Aluminum_____2F 12 Flat Flute _____E5 5.0” Fluted Aluminum _____6S 16 Sharp Flute _____H5 5.0” Fluted Heavy Wall Aluminum_____OC Octagonal _____E8 8.0” Fluted Aluminum
Column Thickness-Shaft Diameter at Grade-Height (max ht. 30’-0”):_____G11 11 Gauge-7.5-____- _____SC4 Schedule 40-X.X-____ -_____G17 7 Gauge- 7.5-____- _____SC8 Schedule 80-X.X-____-_____G24 3 Gauge- 7.5-____-_____A12 .125”thk alum.-6.75-____- _____A18 .188”thk alum.-6.75-____-_____A20 .200”thk alum.-6.75-____- _____A25 .250”thk alum.-6.75-____-
Post Top Tenon:_____ TN2.88/2.50- 2 7/8” Dia.. x 2 1/2” Ht._____ TN2.88/3.00- 2 7/8” Dia.. x 3” Ht._____ TN3.50/3.00- 3 1/2” Dia.. x 3” H_____ TNXX/XX- Other, please specify: ________” Dia.. x ________” Ht.
Accessories: (See Accessorie Section)
Anchor Bolts:_____ 323/ 3/4” x 24” _____ 124/ 1” x 24” _____ 136/ 1” x 36”_____ 330/ 3/4” x 30” _____ 130/ 1” x 30” _____ 140/ 1” x 40”_____ XXX/ Other _____ 999/ Not required_____ 1NW- 1Nut & Washer / Bolt _____ 2NW- 2 Nuts & Washers / Bolt
Coatings (Paint Finish - For detailed information, see Finish in the Specification Section):_____ PO Prime Paint _____ CB Finish Classic Black_____ BG Finish Bottle Green _____ DB Finish Dark Bronze_____ LB Finish Long Beach Blue _____ GI Finish Grey Iron_____ VG Finish Verde Green _____ CW Finish Custom Wet_____ CU Finish Custom Powder Coat _____ XX Other_____ GV Galvanized _____ UF Unfinished
New Frontier - Bi-Metal cast base and fabri-cated column.
6”, 7” or 9”Dia. asdeterminedby columndiam.
Max. ht.30’-0”
7” Dia.
AccessDoor
24” Oct.
24” Octagonal
11 3/4”
7 1/2” O. D. of Steel Shaft
12” Diameter Bolt Circle
CL of Hand Hole and Access Door
(4) Slotted openings to accommodateanchor bolts
3’-3 1/2”
SPRING CITY ELECTRICAL MFG. CO., INHall & Main Streets, P. O. Box 19Spring City, PA 19475-0019Phone: 610-948-4000 Fax: 610-948-5577Website: www.springci ty.com
Page: BP 93
SL02 Portland Bi-Metal Post24” One Piece Slip Base
S p e c i f i c a t i o n
Description
The SL02 Portland Bi-Metal post consists of a cast bused in combination with a fabricated column. The facated column mounts to the foundation at grade and ries the structural load. The cast base serves both a drative and protective function.
Post Material
The base is a heavy wall metal casting available in giron per ASTM A48, ductile Iron per ASTM A536 aluminum per ASTM B26-95 Alloy SR356. The fabried column is tapered at 0.14” per foot and is availablvariable heights. The column can be supplied eismooth or with vertical flutes in patterns of 8 sharp, 12and 16 sharp. Steel columns are available in 11 angauge as standard with other wall thicknesses availupon request. Aluminum column wall thickness rafrom 0.125” to 0.25” with other thicknesses availupon request or as determined by application. For mordepth information on materials, please refer to Materiathe Accessories Section.
Dimensions
Available post heights range from 10’ to 30’ in incremas small as 1”. The cast base has an octagonal cross tion with a base dimension of 24”. The fabricated shas a base plate with four slotted openings for anchor band offers a standard bolt circle of 12”. Other bolt cirare available upon request. Tenon size is variable based upon application.
Installation
A single access door is located in the base to provaccess to the anchor bolts. The door in the base coincwith the hand hole opening in the column for wiaccess. Opposite the hand hole opening inside the coluare a 1/4-20 nut provisions for a ground lug, by othAnchor bolts supplied are per ASTM A36M G55 andfully hot dip galvanized to ASTM A153.
Catalog No.: SLO-2430’-0”
20’-0”
10’-0”
SPRING CITY ELECTRICAL MFG. CO., INC.Hall & Main Streets, P. O. Box 19Spring City, PA 19475-0019Phone: 610-948-4000 Fax: 610-948-5577Website: www.springci ty.com
Page: BP 94
Ordering GuideCast Base Example: ISBSLO-24-CB (Cast Iron Slip Base SLO-24” Oct. Base-Finish Classic Black)
Material Base: Base Configuration:_____ I Cast Iron_____ D Cast Ductile Iron _____SB Slip Base SLO-24-(coatings see below)_____ A Cast Aluminum
Column Example: SSH6S-G11-9.0-30-TN2.88/3.00-130/2NW-CB (Steel Shaft16 Flute-11 Gauge-9.0 Shaft Dia.-30’ Ht.-Tenon 2 7/8” Dia. x 3” Ht.-1” x 30”Anchor Bolts / 2 Nuts & Washers per anchor bolt-Finish Classic Black)
Material Column:_____ SSH Steel Shaft _____ ASH Aluminum Shaft
Column Configuration:_____SS Smooth Straight _____ST Smooth Tapered_____8S 8 Sharp Flute _____E3 3.5” Fluted Aluminum_____2F 12 Flat Flute _____E5 5.0” Fluted Aluminum _____6S 16 Sharp Flute _____H5 5.0” Fluted Heavy Wall Aluminum_____OC Octagonal _____E8 8.0” Fluted Aluminum
Column Thickness-Shaft Diameter at Grade-Height (max ht. 30’-0”):_____G11 11 Gauge-9.0-____- _____SC4 Schedule 40-X.X-____ -_____G17 7 Gauge- 9.0-____- _____SC8 Schedule 80-X.X-____-_____G24 3 Gauge- 9.0-____-_____A12 .125”thk alum.-6.75-____- _____A18 .188”thk alum.-6.75-____-_____A20 .200”thk alum.-6.75-____- _____A25 .250”thk alum.-6.75-____-
Post Top Tenon:_____ TN2.88/2.50- 2 7/8” Dia.. x 2 1/2” Ht._____ TN2.88/3.00- 2 7/8” Dia.. x 3” Ht._____ TN3.50/3.00- 3 1/2” Dia.. x 3” H_____ TNXX/XX- Other, please specify: ________” Dia.. x ________” Ht.
Accessories: (See Accessorie Section)
Anchor Bolts:_____ 323/ 3/4” x 24” _____ 124/ 1” x 24” _____ 136/ 1” x 36”_____ 330/ 3/4” x 30” _____ 130/ 1” x 30” _____ 140/ 1” x 40”_____ XXX/ Other _____ 999/ Not required_____ 1NW- 1Nut & Washer / Bolt _____ 2NW- 2 Nuts & Washers / Bolt
Coatings (Paint Finish - For detailed information, see Finish in the Specification Section):_____ PO Prime Paint _____ CB Finish Classic Black_____ BG Finish Bottle Green _____ DB Finish Dark Bronze_____ LB Finish Long Beach Blue _____ GI Finish Grey Iron_____ VG Finish Verde Green _____ CW Finish Custom Wet_____ CU Finish Custom Powder Coat _____ XX Other_____ GV Galvanized _____ UF Unfinished
SLO - Bi-Metal cast base and fabricated col-umn.
Max. ht.30’-0”
8 5/8” Dia.
AccessDoor
24” Oct.
24” Octagonal
12 3/4”
(4) openings to accommodate anchorbolts
9” O. D. of Steel Shaft
12” Diameter Bolt Circle
CL of Hand Hole and Access Door
3’-2 3/4”
SPRING CITY ELECTRICAL MFG. CO., INHall & Main Streets, P. O. Box 19Spring City, PA 19475-0019Phone: 610-948-4000 Fax: 610-948-5577Website: www.springci ty.com
Page: BP 95
Madison Flatbush Bi-Metal Post29” Two Piece Wrap Base
S p e c i f i c a t i o n
Description
The Madison Flatbush Bi-Metal post consists of a base used in combination with a fabricated column. fabricated column mounts to the foundation at grade carries the structural load. The cast base serves bodecorative and protective function.
Post Material
The base is a heavy wall metal casting available in giron per ASTM A48, ductile Iron per ASTM A536 aluminum per ASTM B26-95 Alloy SR356. The fabried column is tapered at 0.14” per foot and is availablvariable heights. The column can be supplied eismooth or with vertical flutes in patterns of 8 sharp, 12and 16 sharp. Steel columns are available in 11 angauge as standard with other wall thicknesses availupon request. Aluminum column wall thickness rafrom 0.125” to 0.25” with other thicknesses availupon request or as determined by application. For mordepth information on materials, please refer to Materiathe Accessories Section.
Dimensions
Available post heights range from 10’ to 30’ in incremas small as 1”. The cast base has a round cross secwith a base diameter of 29”. The fabricated shaft hbase plate with four slotted openings for anchor bolts offers a standard bolt circle of 12”. Other bolt circlesavailable upon request. Tenon size is variable and baupon application.
Installation
A single access door is located in the base to provaccess to the anchor bolts. The door in the base coincwith the hand hole opening in the column for wiaccess. Opposite the hand hole opening inside the coluare a 1/4-20 nut provisions for a ground lug, by othAnchor bolts supplied are per ASTM A36M G55 andfully hot dip galvanized to ASTM A153.
Catalog No.: FLT-2930’-0”
20’-0”
10’-0”
SPRING CITY ELECTRICAL MFG. CO., INC.Hall & Main Streets, P. O. Box 19Spring City, PA 19475-0019Phone: 610-948-4000 Fax: 610-948-5577Website: www.springci ty.com
Page: BP 96
Ordering GuideCast Base Example: IWBFLT-29-CB (Cast Iron Wrap Base Madison Flatbush-29” Dia. Base-Finish Classic Black)
Material Base: Base Configuration:_____ I Cast Iron_____ D Cast Ductile Iron _____WB Wrap Base FLT-29-(coating see below)_____ A Cast Aluminum
Column Example: SSH8S-G11-8.50-30-TN2.88/3.00-130/2NW-CB (Steel Shaft8 Flute-11 Gauge-8.50 Shaft Dia.-24’ Ht.-Tenon 2 7/8” Dia. x 3” Ht.-1” x 30”Anchor Bolts / 2 Nuts & Washers per anchor bolt-Finish Classic Black)
Material Column:_____ SSH Steel Shaft _____ ASH Aluminum Shaft
Column Configuration:_____SS Smooth Straight _____ST Smooth Tapered_____8S 8 Sharp Flute _____E3 3.5” Fluted Aluminum_____2F 12 Flat Flute _____E5 5.0” Fluted Aluminum _____6S 16 Sharp Flute _____H5 5.0” Fluted Heavy Wall Aluminum_____OC Octagonal _____E8 8.0” Fluted Aluminum
Column Thickness-Shaft Diameter at Grade-Height (max ht. 30’-0”):_____G11 11 Gauge-8.5-____- _____SC4 Schedule 40-X.X-____ -_____G17 7 Gauge- 8.5-____- _____SC8 Schedule 80-X.X-____-_____G24 3 Gauge- 8.5-____-_____A12 .125”thk alum.-6.75-____- _____A18 .188”thk alum.-6.75-____-_____A20 .200”thk alum.-6.75-____- _____A25 .250”thk alum.-6.75-____-
Post Top Tenon:_____ TN2.88/2.50- 2 7/8” Dia.. x 2 1/2” Ht._____ TN2.88/3.00- 2 7/8” Dia.. x 3” Ht._____ TN3.50/3.00- 3 1/2” Dia.. x 3” H_____ TNXX/XX- Other, please specify: ________” Dia.. x ________” Ht.
Accessories: (See Accessorie Section)
Anchor Bolts:_____ 323/ 3/4” x 24” _____ 124/ 1” x 24” _____ 136/ 1” x 36”_____ 330/ 3/4” x 30” _____ 130/ 1” x 30” _____ 140/ 1” x 40”_____ XXX/ Other _____ 999/ Not required_____ 1NW- 1Nut & Washer / Bolt _____ 2NW- 2 Nuts & Washers / Bolt
Coatings (Paint Finish - For detailed information, see Finish in the Specification Section):_____ PO Prime Paint _____ CB Finish Classic Black_____ BG Finish Bottle Green _____ DB Finish Dark Bronze_____ LB Finish Long Beach Blue _____ GI Finish Grey Iron_____ VG Finish Verde Green _____ CW Finish Custom Wet_____ CU Finish Custom Powder Coat _____ XX Other_____ GV Galvanized _____ UF Unfinished
Madison Flatbush - Bi-Metal cast base andfabricated column.
Max. ht.30’-0”
6”, 7” or 9”Dia. as deter-mined by col-umn diam.
7 1/2” Dia.
AccessDoor
29” Dia.
29” Diameter
11 3/4”
(4) Slotted openings to accommodateanchor bolts
8 1/2” O. D. of Steel Shaft
12” Diameter Bolt Circle
CL of Hand Hole and Access Door
4’-9 1/4”
SPRING CITY ELECTRICAL MFG. CO., INHall & Main Streets, P. O. Box 19Spring City, PA 19475-0019Phone: 610-948-4000 Fax: 610-948-5577Website: www.springci ty.com
Page: BP 97
PA Ave. Bridge Bi-Metal Post27 1/2” One Piece Slip Base
S p e c i f i c a t i o n
Description
The PA Ave. Bridge Bi-Metal post consists of a cast bused in combination with a fabricated column. The facated column mounts to the foundation at grade and ries the structural load. The cast base serves both a drative and protective function.
Post Material
The base is a heavy wall metal casting available in giron per ASTM A48, ductile Iron per ASTM A536 aluminum per ASTM B26-95 Alloy SR356. The fabried column is tapered at 0.14” per foot and is availablvariable heights. The column can be supplied eismooth or with vertical flutes in patterns of 8 sharp, 12and 16 sharp. Steel columns are available in 11 angauge as standard with other wall thicknesses availupon request. Aluminum column wall thickness rafrom 0.125” to 0.25” with other thicknesses availupon request or as determined by application. For mordepth information on materials, please refer to Materiathe Accessories Section.
Dimensions
Available post heights range from 10’ to 25’ in incremas small as 1”. The cast base has a round cross secwith a base diameter of 27 1/2”. The fabricated shafta base plate with four slotted openings for anchor band offers a standard bolt circle of 12”. Other bolt cirare available upon request. Tenon size is variable based upon application.
Installation
The door in the base coincides with the opening in the umn for wiring access. Inside the base is a 1/4-20 nut vision for a ground lug, by others. Anchor bolts suppare per ASTM A36M G55 and are fully hot dip galvanto ASTM A153.
Catalog No.: PNN-28
25’-0”
17’-0”
10’-0”
SPRING CITY ELECTRICAL MFG. CO., INC.Hall & Main Streets, P. O. Box 19Spring City, PA 19475-0019Phone: 610-948-4000 Fax: 610-948-5577Website: www.springci ty.com
Page: BP 98
Ordering GuideCast Base Example: ISBPNN-28-CB (Cast Iron Slip Base PA Ave. Bridge-27.5”Dia. Base-Finish Classic Black)
Material Base: Base Configuration:_____ I Cast Iron_____ D Cast Ductile Iron _____SB Slip Base PNN-28-(coatings see below)_____ A Cast Aluminum
Column Example: SSH2F-G11-7.0-25-TN2.88/3.00-130/2NW-CB (Steel Shaft12 Flute-11 Gauge-7.0 Shaft Dia.-25’ Ht.-Tenon 2 7/8” Dia. x 3” Ht.-1” x 30”Anchor Bolts / 2 Nuts & Washers per anchor bolt-Finish Classic Black)
Material Column:_____ SSH Steel Shaft _____ ASH Aluminum Shaft
Column Configuration:_____SS Smooth Straight _____ST Smooth Tapered_____8S 8 Sharp Flute _____E3 3.5” Fluted Aluminum_____2F 12 Flat Flute _____E5 5.0” Fluted Aluminum _____6S 16 Sharp Flute _____H5 5.0” Fluted Heavy Wall Aluminum_____OC Octagonal _____E8 8.0” Fluted Aluminum
Column Thickness-Shaft Diameter at Grade-Height (max ht. 25’-0”):_____G11 11 Gauge-7.0-____- _____SC4 Schedule 40-X.X-____ -_____G17 7 Gauge- 7.0-____- _____SC8 Schedule 80-X.X-____-_____G24 3 Gauge- 7.0-____-_____A12 .125”thk alum.-6.75-____- _____A18 .188”thk alum.-6.75-____-_____A20 .200”thk alum.-6.75-____- _____A25 .250”thk alum.-6.75-____-
Post Top Tenon:_____ TN2.88/2.50- 2 7/8” Dia.. x 2 1/2” Ht._____ TN2.88/3.00- 2 7/8” Dia.. x 3” Ht._____ TN3.50/3.00- 3 1/2” Dia.. x 3” H_____ TNXX/XX- Other, please specify: ________” Dia.. x ________” Ht.
Accessories: (See Accessorie Section)
Anchor Bolts:_____ 323/ 3/4” x 24” _____ 124/ 1” x 24” _____ 136/ 1” x 36”_____ 330/ 3/4” x 30” _____ 130/ 1” x 30” _____ 140/ 1” x 40”_____ XXX/ Other _____ 999/ Not required_____ 1NW- 1Nut & Washer / Bolt _____ 2NW- 2 Nuts & Washers / Bolt
Coatings (Paint Finish - For detailed information, see Finish in the Specification Section):_____ PO Prime Paint _____ CB Finish Classic Black_____ BG Finish Bottle Green _____ DB Finish Dark Bronze_____ LB Finish Long Beach Blue _____ GI Finish Grey Iron_____ VG Finish Verde Green _____ CW Finish Custom Wet_____ CU Finish Custom Powder Coat _____ XX Other_____ GV Galvanized _____ UF Unfinished
PA Ave. Bridge - Bi-Metal cast base and fab-ricated column.
6”, 7” or 9”Dia. asdeterminedby columndiam.
Max. ht.25’-0”
6 5/8” Dia.
AccessDoor
27 1/2” Dia.
27 1/2” Diameter
(4) Openings to accommodateanchor bolts
24” Diameter Bolt CircleCL of Hand Hole and Access Door
2’-3 1/2”
SPRING CITY ELECTRICAL MFG. CO., INHall & Main Streets, P. O. Box 19Spring City, PA 19475-0019Phone: 610-948-4000 Fax: 610-948-5577Website: www.springci ty.com
Page: BP 99
Winchester Bi-Metal Post20” Two Piece Wrap Base
S p e c i f i c a t i o n
Description
The Winchester Bi-Metal post consists of a cast base uin combination with a fabricated column. The fabriccolumn mounts to the foundation at grade and carriesstructural load. The cast base serves both a decorativeprotective function.
Post Material
The base is a heavy wall metal casting available in giron per ASTM A48, ductile Iron per ASTM A536 aluminum per ASTM B26-95 Alloy SR356. The fabried column is tapered at 0.14” per foot and is availablvariable heights. The column can be supplied eismooth or with vertical flutes in patterns of 8 sharp, 12and 16 sharp. Steel columns are available in 11 angauge as standard with other wall thicknesses availupon request. Aluminum column wall thickness rafrom 0.125” to 0.25” with other thicknesses availupon request or as determined by application. For mordepth information on materials, please refer to Materiathe Accessories Section.
Dimensions
Available post heights range from 10’ to 30’ in incremas small as 1”. The cast base has a square cross secwith a base dimension of 20”. The fabricated shaft hbase plate with four slotted openings for anchor bolts offers a standard bolt circle of 12”. Other bolt circlesavailable upon request. Tenon size is variable and baupon application.
Installation
A single access door is located in the base to provaccess to the anchor bolts. The door in the base coincwith the hand hole opening in the column for wiaccess. Opposite the hand hole opening inside the coluare a 1/4-20 nut provisions for a ground lug, by othAnchor bolts supplied are per ASTM A36M G55 andfully hot dip galvanized to ASTM A153.
Catalog No.: WNC-2030’-0”
20’-0”
10’-0”
SPRING CITY ELECTRICAL MFG. CO., INC.Hall & Main Streets, P. O. Box 19Spring City, PA 19475-0019Phone: 610-948-4000 Fax: 610-948-5577Website: www.springci ty.com
Page: BP 100
Ordering GuideCast Base Example: IWBWNC-20-CB (Cast Iron Wrap Base Winchester-20”Sq. Base-Finish Classic Black)
Material Base: Base Configuration:_____ I Cast Iron_____ D Cast Ductile Iron _____WB Wrap Base WNC-24-(coatings see below)_____ A Cast Aluminum
Column Example: SSH2F-G11-7.50-30-TN2.88/3.00-130/2NW-CB (SteelShaft 12 Flute-11 Gauge-7.50 Shaft Dia.-30’ Ht.-Tenon 2 7/8” Dia. x 3” Ht.-1”x 30” Anchor Bolts / 2 Nuts & Washers per anchor bolt-Finish Classic Black)
Material Column:_____ SSH Steel Shaft _____ ASH Aluminum Shaft
Column Configuration:_____SS Smooth Straight _____ST Smooth Tapered_____8S 8 Sharp Flute _____E3 3.5” Fluted Aluminum_____2F 12 Flat Flute _____E5 5.0” Fluted Aluminum _____6S 16 Sharp Flute _____H5 5.0” Fluted Heavy Wall Aluminum_____OC Octagonal _____E8 8.0” Fluted Aluminum
Column Thickness-Shaft Diameter at Grade-Height (max ht. 40’-0”):_____G11 11 Gauge-7.5-____- _____SC4 Schedule 40-X.X-____ -_____G17 7 Gauge- 7.5-____- _____SC8 Schedule 80-X.X-____-_____G24 3 Gauge- 7.5-____-_____A12 .125”thk alum.-6.75-____- _____A18 .188”thk alum.-6.75-____-_____A20 .200”thk alum.-6.75-____- _____A25 .250”thk alum.-6.75-____-
Post Top Tenon:_____ TN2.88/2.50- 2 7/8” Dia.. x 2 1/2” Ht._____ TN2.88/3.00- 2 7/8” Dia.. x 3” Ht._____ TN3.50/3.00- 3 1/2” Dia.. x 3” H_____ TNXX/XX- Other, please specify: ________” Dia.. x ________” Ht.
Accessories: (See Accessorie Section)
Anchor Bolts:_____ 323/ 3/4” x 24” _____ 124/ 1” x 24” _____ 136/ 1” x 36”_____ 330/ 3/4” x 30” _____ 130/ 1” x 30” _____ 140/ 1” x 40”_____ XXX/ Other _____ 999/ Not required_____ 1NW- 1Nut & Washer / Bolt _____ 2NW- 2 Nuts & Washers / Bolt
Coatings (Paint Finish - For detailed information, see Finish in the Specification Section):_____ PO Prime Paint _____ CB Finish Classic Black_____ BG Finish Bottle Green _____ DB Finish Dark Bronze_____ LB Finish Long Beach Blue _____ GI Finish Grey Iron_____ VG Finish Verde Green _____ CW Finish Custom Wet_____ CU Finish Custom Powder Coat _____ XX Other_____ GV Galvanized _____ UF Unfinished
Winchester - Bi-Metal cast base and fabricat-ed column. One piece all cast material versionof this style available, see the Lighting Post -Cast Section
6”, 7” or 9”Dia. asdeterminedby columndiam.
Max. ht.30’-0”
7” Dia.
AccessDoor
20” Sq.
20” Sq.
11 3/4”
7 1/2” O. D. of Steel Shaft
12” Diameter Bolt CircleCL of Hand Hole and Access Door
(4) Slotted openings to accommodateanchor bolts
3’-2”
SPRING CITY ELECTRICAL MFG. CO., INHall & Main Streets, P. O. Box 19Spring City, PA 19475-0019Phone: 610-948-4000 Fax: 610-948-5577Website: www.springci ty.com
Page: BP 10
Miami Bi-Metal Post24” Two Piece Wrap Base
S p e c i f i c a t i o n
Description
The Miami Bi-Metal post consists of a cast base usecombination with a fabricated column. The fabriccolumn mounts to the foundation at grade and carriesstructural load. The cast base serves both a decorativeprotective function.
Post Material
The base is a heavy wall metal casting available in giron per ASTM A48, ductile Iron per ASTM A536 aluminum per ASTM B26-95 Alloy SR356. The fabried column is tapered at 0.14” per foot and is availablvariable heights. The column can be supplied eismooth or with vertical flutes in patterns of 8 sharp, 12and 16 sharp. Steel columns are available in 11 angauge as standard with other wall thicknesses availupon request. Aluminum column wall thickness rafrom 0.125” to 0.25” with other thicknesses availupon request or as determined by application. For mordepth information on materials, please refer to Materiathe Accessories Section.
Dimensions
Available post heights range from 10’ to 40’ in incremas small as 1”. The cast base has a round cross secwith a base diameter of 24”. The fabricated shaft hbase plate with four slotted openings for anchor bolts offers a standard bolt circle of 12”. Other bolt circlesavailable upon request. Tenon size is variable and baupon application.
Installation
The base is supplied as a two piece clam shell to access to the anchor bolts. It also allows access to the hhole opening in the column for wiring. Opposite the hhole opening inside the column are a 1/4-20 nut provisfor a ground lug, by others. Anchor bolts supplied areASTM A36M G55 and are fully hot dip galvanizeASTM A153.
Catalog No.: MIA-24
40’-0”
26’-0”
12’-0”
SPRING CITY ELECTRICAL MFG. CO., INC.Hall & Main Streets, P. O. Box 19Spring City, PA 19475-0019Phone: 610-948-4000 Fax: 610-948-5577Website: www.springci ty.com
Page: BP 102
Ordering GuideCast Base Example: IWBMIA-24-CB (Cast Iron Wrap Base Miami-24” Dia.Base-Finish Classic Black)
Material Base: Base Configuration:_____ I Cast Iron _____WB Wrap Base Miami-24-(coatings see below)_____ D Cast Ductile Iron_____ A Cast Aluminum
Column Example: SSH2F-G11-10-40-TN2.88/3.00-130/2NW-CB (Steel Shaft12 Flute-11 Gauge-10 Shaft Dia.-40’ Ht.-Tenon 2 7/8” Dia. x 3” Ht.-1” x 30”Anchor Bolts / 2 Nuts & Washers per anchor bolt-Finish Classic Black)
Material Column:_____ SSH Steel Shaft _____ ASH Aluminum Shaft
Column Configuration:_____SS Smooth Straight _____ST Smooth Tapered_____8S 8 Sharp Flute _____E3 3.5” Fluted Aluminum_____2F 12 Flat Flute _____E5 5.0” Fluted Aluminum _____6S 16 Sharp Flute _____H5 5.0” Fluted Heavy Wall Aluminum_____OC Octagonal _____E8 8.0” Fluted Aluminum
Column Thickness-Shaft Diameter at Grade-Height (max ht. 40’-0”):_____G11 11 Gauge-10-____- _____SC4 Schedule 40-X.X-____ -_____G17 7 Gauge- 10-____- _____SC8 Schedule 80-X.X-____-_____G24 3 Gauge- 10-____-_____A12 .125”thk alum.-6.75-____- _____A18 .188”thk alum.-6.75-____-_____A20 .200”thk alum.-6.75-____- _____A25 .250”thk alum.-6.75-____-
Post Top Tenon:_____ TN2.88/2.50- 2 7/8” Dia.. x 2 1/2” Ht._____ TN2.88/3.00- 2 7/8” Dia.. x 3” Ht._____ TN3.50/3.00- 3 1/2” Dia.. x 3” H_____ TNXX/XX- Other, please specify: ________” Dia.. x ________” Ht.
Accessories: (See Accessorie Section)
Anchor Bolts:_____ 323/ 3/4” x 24” _____ 124/ 1” x 24” _____ 136/ 1” x 36”_____ 330/ 3/4” x 30” _____ 130/ 1” x 30” _____ 140/ 1” x 40”_____ XXX/ Other _____ 999/ Not required_____ 1NW- 1Nut & Washer / Bolt _____ 2NW- 2 Nuts & Washers / Bolt
Coatings (Paint Finish - For detailed information, see Finish in the Specification Section):_____ PO Prime Paint _____ CB Finish Classic Black_____ BG Finish Bottle Green _____ DB Finish Dark Bronze_____ LB Finish Long Beach Blue _____ GI Finish Grey Iron_____ VG Finish Verde Green _____ CW Finish Custom Wet_____ CU Finish Custom Powder Coat _____ XX Other_____ GV Galvanized _____ UF Unfinished
Miami - Bi-Metal cast base and fabricated col-umn.
6”, 7” or 9”Dia. as deter-mined by col-umn diam.
Max. ht.40’-0”
9 3/4” Dia.
24” Dia.
2’-11 1/4”
24” Dia
15”
10” O. D. of Steel Shaft
15” Diameter Bolt Circle
CL of Hand Hole
(4) Slotted openings to accommodateanchor bolts
SPRING CITY ELECTRICAL MFG. CO., INHall & Main Streets, P. O. Box 19Spring City, PA 19475-0019Phone: 610-948-4000 Fax: 610-948-5577Website: www.springci ty.com
Page: BP 10
Patterson Bi-Metal Post27” One Piece Slip or Two Piece Wrap Base
S p e c i f i c a t i o n
Description
The Patterson Bi-Metal post consists of a cast base usecombination with a fabricated column. The fabriccolumn mounts to the foundation at grade and carriesstructural load. The cast base serves both a decorativeprotective function.
Post Material
The base is a heavy wall metal casting available in giron per ASTM A48, ductile Iron per ASTM A536 aluminum per ASTM B26-95 Alloy SR356. The fabried column is tapered at 0.14” per foot and is availablvariable heights. The column can be supplied eismooth or with vertical flutes in patterns of 8 sharp, 12and 16 sharp. Steel columns are available in 11 angauge as standard with other wall thicknesses availupon request. Aluminum column wall thickness rafrom 0.125” to 0.25” with other thicknesses availupon request or as determined by application. For mordepth information on materials, please refer to Materiathe Accessories Section.
Dimensions
Available post heights range from 10’ to 40’ in incremas small as 1”. The cast base has a round cross secwith a base diameter of 27”. The fabricated shaft hbase plate with four slotted openings for anchor bolts offers a standard bolt circle of 12”. Other bolt circlesavailable upon request. Tenon size is variable and baupon application.
Installation
A single access door is located in the base to provaccess to the anchor bolts. The door in the base coincwith the hand hole opening in the column for wiaccess. Opposite the hand hole opening inside the coluare a 1/4-20 nut provisions for a ground lug, by othAnchor bolts supplied are per ASTM A36M G55 andfully hot dip galvanized to ASTM A153.
Catalog No.: PAT-2740’-0”
26’-0”
12’-0”
SPRING CITY ELECTRICAL MFG. CO., INC.Hall & Main Streets, P. O. Box 19Spring City, PA 19475-0019Phone: 610-948-4000 Fax: 610-948-5577Website: www.springci ty.com
Page: BP 104
Ordering GuideCast Base Example: ISBPAT-27-CB (Cast Iron Slip Base Patterson-27” Dia.Base-Finish Classic Black)
Material Base: Base Configuration:_____ I Cast Iron _____SB Slip Base Patterson-27-(coatings see below)_____ D Cast Ductile Iron _____WB Wrap Base Patterson-27-(coatings see below)_____ A Cast Aluminum
Column Example: SSH2F-G11-10-40-TN2.88/3.00-130/2NW-CB (Steel Shaft12 Flute-11 Gauge-10 Shaft Dia.-40’ Ht.-Tenon 2 7/8” Dia. x 3” Ht.-1” x 30”Anchor Bolts / 2 Nuts & Washers per anchor bolt-Finish Classic Black)
Material Column:_____ SSH Steel Shaft _____ ASH Aluminum Shaft
Column Configuration:_____SS Smooth Straight _____ST Smooth Tapered_____8S 8 Sharp Flute _____E3 3.5” Fluted Aluminum_____2F 12 Flat Flute _____E5 5.0” Fluted Aluminum _____6S 16 Sharp Flute _____H5 5.0” Fluted Heavy Wall Aluminum_____OC Octagonal _____E8 8.0” Fluted Aluminum
Column Thickness-Shaft Diameter at Grade-Height (max ht. 40’-0”):_____G11 11 Gauge-10-____- _____SC4 Schedule 40-X.X-____ -_____G17 7 Gauge- 10-____- _____SC8 Schedule 80-X.X-____-_____G24 3 Gauge- 10-____-_____A12 .125”thk alum.-6.75-____- _____A18 .188”thk alum.-6.75-____-_____A20 .200”thk alum.-6.75-____- _____A25 .250”thk alum.-6.75-____-
Post Top Tenon:_____ TN2.88/2.50- 2 7/8” Dia.. x 2 1/2” Ht._____ TN2.88/3.00- 2 7/8” Dia.. x 3” Ht._____ TN3.50/3.00- 3 1/2” Dia.. x 3” H_____ TNXX/XX- Other, please specify: ________” Dia.. x ________” Ht.
Accessories: (See Accessorie Section)
Anchor Bolts:_____ 323/ 3/4” x 24” _____ 124/ 1” x 24” _____ 136/ 1” x 36”_____ 330/ 3/4” x 30” _____ 130/ 1” x 30” _____ 140/ 1” x 40”_____ XXX/ Other _____ 999/ Not required_____ 1NW- 1Nut & Washer / Bolt _____ 2NW- 2 Nuts & Washers / Bolt
Coatings (Paint Finish - For detailed information, see Finish in the Specification Section):_____ PO Prime Paint _____ CB Finish Classic Black_____ BG Finish Bottle Green _____ DB Finish Dark Bronze_____ LB Finish Long Beach Blue _____ GI Finish Grey Iron_____ VG Finish Verde Green _____ CW Finish Custom Wet_____ CU Finish Custom Powder Coat _____ XX Other_____ GV Galvanized _____ UF Unfinished
Patterson - Bi-Metal cast base and fabricatedcolumn.
6”, 7” or 9”Dia. as deter-mined bycolumn diam.
Max. ht.40’-0”
9 1/2” Dia.
27” Dia.
4’-6 3/8” Access Door27” Dia
15”
10” O. D. of Steel Shaft
15” Diameter Bolt Circle
CL of Hand Hole and Access Door
(4) Slotted openings to accommodateanchor bolts