Cesar Marcondes (UFSCar)

FIBRE Open Workshop

Salvador, 26/27-11-2012

FIBRE Architecture

FIBRE and FIBRE-BR

Deployment Infrastructure

Wireless and Wired Technologies

Federation with FIBRE-EU

Review of FIBRE Island Resources

Island Design

• Homogeneous “FIBRE-BR racks”? Yes !– Single documentation

• Cookbooks on how to create the VMs, • Cookbooks on how to use them

– Reproducibility / Compliance– Bugs found can be fixed on all islands– New features can be applied uniformly– Modularity to support 2 overlapping “testbeds” in

1st Phase (OCF-based and OMF-based)

IBM Server

NetFPGA Servers

Can be used both as OF SWITCH and experiment PC

Icarus Nodes

OpenFlow Switch for DatapathNormal Switch for Control path

• Example: UFSCar using DATACOM OF 1.0 hybrid switch (per port configuration)

FIBRE – Island

Example: UFSCar Island Deployment

Hardware Status (Deployment)

Software: Control and Monitoring Framework (CMF)

• According to the requirements • Support at same time both OCF and OMF

– OCF (OFELIA Control Framework)– OMF (Orbit Control Framework)

Trapezoid forms (eth1.999, eth2..ethN) are Linxu bridges.Red interfaces is an interface for Dom0 management onlyGreen interfaces, (eth1 and peth1.999) are interfaces for the control LANYellow interfaces are experimentation interfaces. Each server can have N of this experimentation interfaces.

OFELIA Xen Agent (Concepts)

FIBRE Overall Software Architecture

Logical Topologies

• Icarus Nodes could be running on the Normal Control Switch (although not elegant) or set a VLAN and “learning switch” controller in the OF Switch

Giga

FIBREnet

FIBRE Islands Deployment

Thank you / ObrigadoCesar Marcondes

Federal University of São Carlos

twitter.com/FIBRE_project

www.facebook.com/fibre.project

www.fibre-ict.eu