Post on 05-Sep-2020
高圧管継手Fittings for High Pressure Application
IHARACAT. No. 9863G
2
製品インデックス/VISUAL INDEX
12
90°エルボ WLA90°Elbow WLA
14
カップリング WFCCoupling WFC
17
特殊90°エルボ SLDSpecial 90°Elbow SLD
20
キャップ WCACap WCA
22
ティー STATee STA
24
ニップル SNPNipple SNP
13
クロス WXACross WXA
16
レジューシングインサート WRMReducing Insert WRM
18
特殊カップリング SFDSpecial Coupling SFD
22
45°エルボ SLB45°Elbow SLB
24
ブッシング SBUBushing SBU
26
メスオスソケットB形 SSSStreet Socket Type B SSS
13
45°エルボ WLB45°Elbow WLB
15
レジューサ WRCReducer WRC
17
特殊ティー STDSpecial Tee STD
21
メスオスエルボ SLCStreet Elbow SLC
23
レジューサ SRCReducer SRC
25
メスオスソケットA形 SSSStreet Socket Type A SSS
12
ティー WTATee WTA
26
メスオスソケットC形 SSFStreet Socket Type C SSF
27
六角プラグ(平行ねじ) SPEHex Plug SPE
27
六角プラグ(テーパねじ) SPBHex Plug SPB
26
六角穴付プラグ SPAHollow hex Plug SPA
14
ハーフカップリング WHCHalf Coupling WHC
17
特殊45°エルボ SLESpecial 45°Elbow SLE
21
90°エルボ SLA90°Elbow SLA
23
カップリング SFCCoupling SFC
25
径違いニップル SRNReducing Nipple SRN
18
シリンダ用エルボ WLFCylinder Elbow WLF
18
シリンダ用エルボ SLFCylinder Elbow SLF
19
ボスA形 WBABoss Type A WBA
19
ボスR形 WBRBoss Type R WBR
イハラ_高圧管継手_170525.indd 2 2017/06/21 11:56
3
INDEX
27
四角頭付プラグ SPCSquare Head Plug SPC
29
丸ソケット SMCSocket SMC
29
キャップ SCACap SCA
28
ボスR形 SBRBoss Type R SBR
28
ボスA形 SBABoss Type A SBA
33
ユニオンD形 WUDUnion Type D WUD
35
組フランジ FA-AFlange Assembly FA-A
39
フランジ FA-YA・FA-YBFlange FA-YA・FA-YB
30
圧力計用アダプタ SGAAdapter for Pressure Gauge SGA
33
ユニオンH形 WUHUnion Type H WUH
36
フランジ FA-HA・FA-HBFlange FA-HA・FA-HB
40
フランジ FA-ZA・FA-ZBFlange FA-ZA・FA-ZB
31
ユニオンA形 WUAUnion Type A WUA
34
ユニオン SUAUnion SUA
37
フランジ FA-SA・FA-SBFlange FA-SA・FA-SB
41
フランジ FA-WA・FA-WBFlange FA-WA・FA-WB
32
ユニオンB形 WUBUnion Type B WUB
30
エアー抜きバルブ SAPAir Bleeding Valve SAP
34
ユニオンF形 WUFUnion Type F WUF
38
フランジ FA-LAFlange FA-LA
32
ユニオンC形 WUCUnion Type C WUC
イハラ_高圧管継手_170525.indd 3 2017/06/21 11:56
4
ごあいさつ/INTRODUCTION
当社は、日本における高圧継手のトップメーカーとして半世紀におよぶ豊富な経験と実績をもとに油圧関連産業はもとより、原子力をはじめとしたパワープラン卜、石油、LNG、化学、製鉄プラント等、国内及び海外のあらゆる産業分野で高いシェアとご好評をいただいております。
Ihara Science Corporation is the leading manufacturer of high pressure fi ttings in Japan with more than 70 years of experience in development, design and production of high pressure fi ttings backed by track records not only in the hydraulic related industries but also in power generation including nuclear power plants, LNG and chemical plants as well as in steel mills where these fi ttings have been enjoying a very high share of the market. Users both domestic and overseas have high appraisal for the performance and quality of Ihara's high pressure fi ttings.
特徴/FEATURES(1)品種が豊富に揃っています。
● 一般的に使用される継手については少量多品種品について即納体制を日指しております。● 当カタログ外の製品につきましても配管上必要と考えられる製品はほとんど設計系列化されておりますので御問合せ下さい。● あらゆる規格、材質、形状の設計、製作に対応しております。 JIS、ANSI、DIN、ISO等
(1)A Wide Range of Fittings
● We are striving to be able to achieve prompt delivery for high mix, small lot requirements.● The design series also include fi ttings that may not be listed in this catalogue but mandatory required for the piping. Contact us with your any inquiries.● We will be responding to any type of standards (which include JlS, ANSI, DIN, ISO, etc.), materials and confi gurations.
(2) SoftからHardまで配管上のあらゆるニーズにお応えできます。
● 仕様を提示していただければ各種のバックデータ(強度計算、応力解析、実験値等)に基づき最適の設計・製作まで行ないます。● また、当社の岐阜IPEC事業部において配管設計、配管加工、現地工事まで一貫したサービスも提供できます。
(2)We respond to all type of piping needs from Software to Hardware
● Upon receiving some special specifi cations, we will develop, an optimum piping design and fabrication by utilizing the back-up data (strength calculation, stress analysis, empirical values, etc.) accumulated through past experience.
● Our IPEC Plant can provide a complete range of services from piping design and fabrication to fi eld installation work.
資格・許認可・認定 /QUALIFICATIONS, APPROVALS AND CERTIFICATIONS●造船関係/Shipbuilding Societies
一般財団法人 日本海事協会/Nihon Kaiji KyokaiAmerican Bureau of ShippingDet Norske Veritas
イハラ_高圧管継手_170525.indd 4 2017/06/21 11:56
5
●原子力認定ならびにベンダー取得会社名/Nuclear Power Approval and Registered Vendor
三菱重工業株式会社/Mitsubishi Heavy Industries, Ltd.株式会社日立製作所/Hitachi, Ltd.東芝株式会社/Toshiba Corp.富士電機株式会社/Fuji Electric Co., Ltd.日揮株式会社/JGC Corporation東洋エンジニアリング株式会社/Toyo Engineering Corp.
●プラント関係(ベンダー取得会社名)/General Contractors (Registered Vendor)
Shell Internationale Petroleum Maatschappij B.V.Aramco Overseas Co.,Bechtel InternationalFluor International, Inc.The M.W. Kellogg Co.,Inc.Exxon Mobil Corp.
●建設業許可/Construction Work Approval
建設大臣許可(一般-56)第6306号(管工事及び機械器具設置工事業)Minister of Construction Approval (General-56) No.6306 (Piping work and equipment and ma-chinery installation work)
JPF規格(日本金属継手協会規格)/JPF STANDARDS (JAPAN PIPE FITTINGS ASSOCIATION STANDARDS) 昭和48年5月、高圧継手製造業者12社により日本高圧継手協会が設立され、協会加入各社による技術委員会により協会規格(FAS規格)が制定されました。 現在FAS規格は日本金属継手協会規格(JPF規格)として、JPF FAS101(特殊配管用鋼製差込み溶接式管継手)、JPF FAS102(高圧配管用鋼製ねじ込み式管継手)、JPF FAS103(油圧用35MPa(350kgf/cm2)突合せ溶接式管フランジ)、JPF FAS104(特殊配管用21MPa(210kgf/cm2)鋼製差込み溶接式、ねじ込み式ユニオン管継手)の4規格が制定されております。
Japan High Pressure Fitting Association was established in May, 1973 by 12 high pressure fi tting manufacturers, and the Engineering Committee comprised by the member companies established the Japan High Pressure Fitting Association Standards (FAS Standards). As a standard of the JAPAN PIPE Fittings Association.The following 4 Standards have been established by the Engineering Committee: JPF FAS 101: Socket-weld Type Steel Pipe Fittings for Special Service. JPF FAS 102: Screwed Type Steel Pipe Fittings for High Pressure Service. JPF FAS 103: 35 MPa (350 kgf/cm2) Butt Weld Type Pipe Flanges for Hydraulic Applications. JPF FAS 104: 21 MPa (210 kgf/cm2) Steel Socket Weld Type and Threaded Type Union Pipe Fittings for Special Piping
Applications.
イハラ_高圧管継手_170525.indd 5 2017/06/21 11:56
6
差込み溶接形管継手およびねじ込み形管継手/SOCKET WELD PIPE FITTINGS & THREADED PIPE FITTINGS
標準仕様/STANDARD SPECIFICATIONS
1. 接続される鋼管の種類/TYPES OF STEEL PIPES to be connectedJIS G3454(圧力配管用炭素鋼鋼管)STPGJIS G3455(高圧配管用炭素鋼鋼管)STSJIS G3456(高温配管用炭素鋼鋼管)STPTJIS G3458(配管用合金鋼鋼管)STPAJIS G3459(配管用ステンレス鋼鋼管)SUS-TPJIS G3460(低温配管用鋼管)STPL
JIS G3454 (Carbon Steel Pipes for General Service) STPGJIS G3455 (Carbon Steel Pipes for High Pressure Service) STSJIS G3456 (Carbon Steel Pipes for High Temperature Service) STPTJIS G3458 (Alloy Steel Pipes) STPAJIS G3459 (Stainless Steel Pipes) SUS-TPJIS G3460 (Steel Pipes for Low Temperature Service) STPL
2. 関連規格/ASSOCIATED STANDARDS●JIS B2316「配管用鋼製差込み溶接式管継手」●JIS B2291「油圧用21MPa管フランジ」●JIS F7806 船の280K及び350K油圧鋼管用差込み溶接式フランジ●FAS 101 特殊配管用鋼製差込み溶接式管継手●FAS 102 特殊配管用鋼製ねじ込み式管継手●FAS 103 油圧用35MPa突合せ溶接式管フランジ●FAS 104 21MPa鋼製差込み溶接式、ねじ込み式ユニオン管継手
●JIS B2316 Socket Weld Type Pipe Fittings for General Piping Applications●JIS B2291 21 MPa Pipe Flanges for Hydraulic Applications●JIS F7806 Socket Weld Type Flanges for 280K and 350K Hydraulic Steel Pipes for Ships●FAS 101: Steel Socket Pipe Fitting Weld Type for Special Piping Applications●FAS 102: Steel Threaded Pipe Fitting Weld Type for Special Piping Applications●FAS 103: 35 MPa Butt Weld Type Pipe Flanges for Hydraulic Applications●FAS 104: 21 MPa Steel Socket Weld Type and Threaded Type Union Pipe Fittings
イハラ_高圧管継手_170525.indd 6 2017/06/21 11:56
7
3. 管継手の材料/MATERIAL FOR FITTINGS管継手の材料は、接続される鋼管に相当する鋼材として、表1によります。
The material of fi ttings shall coincide to the material of pipes to be connected as shown in Table 1.
表1/Table 1区 分Division
管継手の材料Pipe Fittings Material
記 号Symbol
接続される鋼管(参考)Connecting Steel Pipe (reference)
炭 素 鋼Carbon Steel
JIS G4051 S25C又は or
ASTM A105
PT410 STPG410, STPT410 圧力配管用For general service
STS370STS410
高圧配管用For high pressure service
合 金 鋼Alloy Steel
ASTM A182 F11 PA23 STPA23高温配管用For high temperature serviceASTM A182 F22 PA24 STPA24
ASTM A182 F5 PA25 STPA25
ステンレス鋼Stainless Steel
JIS G4303 SUS304 SUS304 SUS304TP
耐食高温配管用及び低温配管用For corrosion resistance,For high temperature piping
and low temperature piping
JIS G4303 SUS304L SUS304L SUS304LTP
JIS G4303 SUS316 SUS316 SUS316TP
JIS G4303 SUS316L SUS316L SUS316LTP
JIS G4303 SUS321 SUS321 SUS321TP
JIS G4308 SUS304 SUS304 SUS304TP
JIS G4308 SUS316 SUS316 SUS316TP
JIS G4318 SUS304 SUS304 SUS304TP
JIS G4318 SUS304L SUS304L SUS304LTP
JIS G4318 SUS316 SUS316 SUS316TP
JIS G4318 SUS316L SUS316L SUS316LTP
JIS G4318 SUS321 SUS321 SUS321TP
低温用鋼Steel for low temperature
ASTM A350 LF2 PL380 STPL380 低温配管用For low temperature piping
注)材料による標準製作品は炭素鋼、SUS304及びSUS316とします。
Note: Material of standard products shall be carbon steel, SUS304 and SUS316.
4. 耐圧性/PRESSURE RESISTANCE1. 差込み溶接形管継手は、ユニオン類及びフランジ類を除き、表1に指定した鋼管に関する日本工業規格(JIS B2316の4項)に規定されている水圧試験圧力と同じ水圧に耐える事を保証します。2. ねじ込み形管継手は、ユニオンを除き、31.4MPa(320kgf/cm2)の水圧を加え3分間保持しても破裂せず、また漏れないことを保証します。
3. ユニオン製、及びフランジ類については該当する各シートをご参照下さい。
1. Socket weld pipe fi ttings are warranted to withstand pressure equivalent to the hydrostatic test pressure specifi ed in Japanese Industrial Standard (Chapter 4 of JIS B2316) for steel pipes indicated in Table 1, except for unions and fl anges.
2. Threaded pipe fittings are warranted not to burst at hydrostatic pressure of 320 kgf/cm2 and not to leak when retained for 3 minutes except for unions.
3. Refer to applicable pages in regards to unions and fl anges.
イハラ_高圧管継手_170525.indd 7 2017/06/21 11:56
8
5. 寸法及び寸法許容差/DIMENSIONS AND DIMENSIONAL TOLERANCES寸法はカタログの各シートにより、寸法許容差は表2によります。
The respective dimensions are noted in the applicalble pages, and the applicable dimensional tolerances are as specifi ed in Table 2 below.
表2/Table 2
項 目Items
管継手の種類Types of Pipe Fittings
径の呼びNominal Diameter
¹⁄₈&¹⁄₄ ³⁄₈-³⁄₄ 1-2 2-¹⁄₂&3許容差
Tolerances
差込み部の内径(B)Socket bore (B)
すべての管継手All pipe fi ttings
+0.3 0
+0.4 0
穴 径(D)Bore diameter (D) +0.4 +0.8
差込み部の内径と穴径の偏心Eccentricity of socket bore to bore diameter ±0.8
差込み部の穴と管継手の穴の軸線との傾Diff erence of socket bore axis to fi tting bore axis
1.5/300以下Less than 1.5/300
中心から差込み部底面までの距離(A)Dimension from center to socket bottom shoulder (A)
45°エルボ、90°エルボ、ティー、クロス45°elbow, 90°elbow, Tee, Cross ±0.8 ±1.5 ±2 ±2.5
差込み部底面両間の距離(E)Dimension between socket bottom shoulders (E)
カップリングCoupling ±1.5 ±3 ±4 ±5
差込み部底面から対面までの距離(F)Dimension from socket bottom shoulder to opposite end (F)
ハーフカップリングHalf Coupling ±0.8 ±1.5 ±2 ±2.5
ねじ込み式管継手の外径Outer diameter of threaded pipe fi tting
45°エルボ、90°エルボ、ティー、クロス45°elbow, 90°elbow, Tee, Cross
+1.6-0.5
+2.0-0.5
+2.0-1.0
カップリング、ボス等Coupling, Boss, etc
+1.2-0.5
外径寸法の±1.8%±1.8% of OD
二面巾Width across fl ats すべての管継手
All pipe fi ttingsJIS B1002のB1の許容差2種による
Tolerance of type 2, B1 of JIS B1002上記指定以外の寸法許容差Dimensional tolerances for other than specifi ed above
6. ねじ/THREADS管継手接続端部のねじは、JIS B0203(管用テーパねじ)、JIS B0202(管用平行ねじ)とします。ユニオンナットのねじはJIS B0207(メートル細目ねじ)とします。
Threads of the pipe fi tting connection ends shall be JIS B0203 (taper threads for pipes) and JlS B0202 (parallel thread for pipes).Threads for union nuts shall be JIS B0207 (metric fi ne screw threads).
イハラ_高圧管継手_170525.indd 8 2017/06/21 11:56
9
7. 製造方法/MANUFACTURING PROCESS管継手は3項に規定した材料から熱間又は冷間による塑性加工又は切削加工によって製造します。
Pipe fi ttings are produced by hot or cold plastic forming or machining material specifi ed in Par. 3
表3/Table 3材 料Material
JIS G4051 S25CASTM A105
JIS G4303 SUS304 SUS304L SUS316 SUS316L
JIS G4318 SUS304 SUS304L SUS316 SUS316L
8. 検査/INSPECTION管継手は、JIS及び社内規格に基づき各工程ごとに検査を行い、安定した品質を確保しております。
Pipe fi ttings are inspected at each production stage in accordance with applicable JIS and in-house inspection standards to insure stable high quality.
1. 材料検査/Material inspection管継手の材料はJIS又はASTMに合致し、さらに社内基準に合格したものを使用します。材料検査は次の項目について行います。
Material used for production of pipe fi ttings shall satisfy JIS or ASTM as well as in-house standards.Following material inspection shall be performed:
a) 形状・寸法検査/Confi guration and dimensional inspectionb) 外観検査/Visual inspectionc) 材質確認検査/Material confi rmation inspection
その他必要に応じ次の各種特殊試験検査を行います。In addition, following tests shall be performed as needed. 液体浸透探傷試験/Liquid penetrant test 超音波探傷試験/Ultrasonic test 引張試験/Tensile test 衝撃試験/Impact test 腐食試験/Corrosion test
2. 中間検査/Intermediate inspectiona) 形状・寸法検査/Confi guration and dimensional inspectionb) 外観検査/Visual inspection
3. 受渡し検査/Final inspectiona) 形状・寸法検査/Confi guration and dimensional inspectionb) 外観検査/Visual inspection
イハラ_高圧管継手_170525.indd 9 2017/06/21 11:56
10
9. 管継手の呼び方/PART NUMBERS FOR PIPE FITTINGSご注文の際は各シートの呼び方と材料記号によって表示して下さい。ただし炭素鋼については材料記号は不要です。
When placing your order indicate your requirements by part numbers shown in the respective pages of this catalogue together with the material symbols.Material symbol indication is not required for carbon steel.
表示例/Example
〈炭素鋼/Carbon Steel〉
W L A 0 6 - 8 0 0 F F:FAS規格/FAS standards継手の呼び/Fitting part number※表面処理:ご希望によりメッキ処理『亜鉛メッキ+三価クロメート処理』をいたします。
〈炭素鋼以外/Others〉J:イハラオリジナルのみ
W L A 0 6 - 8 0 0 J - S U S 3 0 4 材料記号/Material symbol J:イハラオリジナル/Original継手の呼び/Fitting part number
J:イハラオリジナル/Original
10. 表示/MARKINGS管継手には原則として次の表示をします。In principle, pipe fi ttings shall bear following markings:
1. 差込み溶接形管継手/Socket weld pipe fi ttingsa. 商標/Trademarkb. 材料による種類を示す記号/Symbol indicating type of materialc. 大きさの呼び/Nominal sized. スケジュール番号/Schedule numbere. 製造ロットNo./Manufacturing lot number注)製造番号の表示はJIS B2316にある形状のものを原則とする。Note: Manufacturing number markings shall be in principle in accordance with JIS B2316.
2. ねじ込み形管継手/Threaded pipe fi ttingsa. 商標/Trademarkb. 材料による種類を示す記号(炭素鋼については表示しない)/ Symbol indicating type of material (not indicated for carbon steel)c. 大きさの呼び/Nominal sized. 製造ロットNo./Manufacturing lot number
イハラ_高圧管継手_170525.indd 10 2017/06/21 11:56
11
11. その他/OTHER TYPES1. 径違いの継手はこのカタログに表示したもの以外は弊社の標準品ではありませんがご要望に応じますので、次の要領にてお引き合せ下さい。
1. Reduced type of fi ttings are limited to those listed in this catalogue, but other sizes can be made available upon request. When inquiring please observe the following rules:
a. 2個の口径をもつ場合/Two diff erent size bores径の大きなものを①、小さなものを②という順序に呼ぶ。Indicate the larger bore fi rst ① followed by the smaller bore ②. Indicate in this numerical order.
b. 3個の口径をもつ場合/Three diff erent size bores同一または平行な中心線上にある径の大きなものを①、小さなものを②、残りのものを③という順序に呼ぶ。lndicate the larger bore of the two bores on the same center line fi rst ① followed by the bore on the opposite end ②, and then the remaining bore ③. Indicate in the numerical order.
c. 4個の口径をもつ場合/Four diff erent bores最大の径を①、これと同一または平行な中心線上にあるものを②、残り2個のうち径の大きなものを③、小さなものを④、という順に呼ぶ。Indicate the largest bore fi rst ① followed by the bore on the opposite end ②, and of the remaining two bores, indicate the larger bore ③ followed by the bore on the opposite end ④. Indicate in this numerical order.
例: 鋼製差込みティー: 3/4×3/8×1/2 (sch.80) 注: 誤記防止のためできる限り下図のごとき略記号表示を用いて下さい。
Example: Steel socket weld reduction Tee: 3/4×3/8×1/2 (sch.80)Note: In order to preclude any misunderstanding, a simple sketch with size indications as shown below
is recommended.
3/4 □ □ 3/8
□1/2
なお、上記何れの場合も、外径寸法は基本的に最大口径の同径の場合(本カタログ表示のもの)と同一になります。When the outside bore diameter is the same diameter as the largest bore diameter in principle,the outside bore diameter shall be the same as indicated in this catalogue in all of the above cases.
2. 各シートの管継手には見越生産品と受注生産品とがありますので、念のため在庫をお問い合わせ下さい。2. Pipe fi ttings listed in this catalogue include fi ttings available from stock shelves as well as fi ttings made upon orders, and it is therefore recommended to inquire fi rst.
3. 品質、性能の改善、向上に伴い、本カタログと納入される製品とは多少異なる場合がありますのでご了承下さい。
3. The manufacturer is constantly implementing improvements on their products, and therefore reserves the right to modify the actual products to be delivered from the products of this catalogue.
イハラ_高圧管継手_170525.indd 11 2017/06/21 11:56
12
単位:mm/unit: mm継手の呼びPart No.
呼び径Nominal sizes B C D M A L 重量(kg)
Weight (kg)
注) 合金鋼、ステンレス鋼についてはC、L、M寸法が異なります。炭素鋼以外は寸法が異なるので、都度お問い合わせください。(Jシリーズになります。)Note; Dimensions of C, L and M for alloy steel and stainless steel products deviate from the above dimensions. (contact us)
単位:mm/unit: mm継手の呼びPart No.
呼び径Nominal sizes B C D M A L 重量(kg)
Weight (kg)
注) 合金鋼、ステンレス鋼についてはC、L、M寸法が異なります。炭素鋼以外は寸法が異なるので、都度お問い合わせください。(Jシリーズになります。)Note; Dimensions of C, L and M for alloy steel and stainless steel products deviate from the above dimensions. (contact us)
WLA・WTA 差込み溶接形管継手/Socket Weld Pipe Fittings90°エルボ WLA/90°Elbow WLA
ティー WTA/Tee WTA
イハラ_高圧管継手_170525.indd 12 2017/06/21 11:56
13
単位:mm/unit: mm継手の呼びPart No.
呼び径Nominal sizes B C D M A L 重量(kg)
Weight (kg)
注) 合金鋼、ステンレス鋼についてはC、L、M寸法が異なります。炭素鋼以外は寸法が異なるので、都度お問い合わせください。(Jシリーズになります。)Note; Dimensions of C, L and M for alloy steel and stainless steel products deviate from the above dimensions. (contact us)
注) 合金鋼、ステンレス鋼についてはC、L、M寸法が異なります。炭素鋼以外は寸法が異なるので、都度お問い合わせください。(Jシリーズになります。)Note; Dimensions of C, L and M for alloy steel and stainless steel products deviate from the above dimensions. (contact us)
単位:mm/unit: mm継手の呼びPart No.
呼び径Nominal sizes B C D M A L 重量(kg)
Weight (kg)
WLB・WXA 差込み溶接形管継手/Socket Weld Pipe Fittings45°エルボ WLB/45°Elbow WLB
クロス WXA/Cross WXA
イハラ_高圧管継手_170525.indd 13 2017/06/21 11:56
14
単位:mm/unit: mm継手の呼びPart No.
呼び径Nominal sizes B C D F M L 重量(kg)
Weight (kg)
単位:mm/unit: mm継手の呼びPart No.
呼び径Nominal sizes B C D E M L 重量(kg)
Weight (kg)
WFC・WHC 差込み溶接形管継手/Socket Weld Pipe Fittingsカップリング WFC/Coupling WFC
ハーフカップリング WHC/Half Coupling WHC注) 合金鋼、ステンレス鋼についてはC、L、M寸法が異なります。炭素鋼以外は寸法が異なるので、都度お問い合わせください。(Jシリーズになります。)Note; Dimensions of C, L and M for alloy steel and stainless steel products deviate from the above dimensions. (contact us)
注) 合金鋼、ステンレス鋼についてはC、L、M寸法が異なります。炭素鋼以外は寸法が異なるので、都度お問い合わせください。(Jシリーズになります。)Note; Dimensions of C, L and M for alloy steel and stainless steel products deviate from the above dimensions. (contact us)
イハラ_高圧管継手_170525.indd 14 2017/06/21 11:56
15
単位:mm/unit: mm継手の呼びPart No.
呼び径Nominal sizes B B1 C C1 D E M L 重量(kg)
Weight (kg)
WRC 差込み溶接形管継手/Socket Weld Pipe Fittingsレジューサ WRC/Reducer WRC
注) 合金鋼、ステンレス鋼についてはC、L、M寸法が異なります。炭素鋼以外は寸法が異なるので、都度お問い合わせください。(Jシリーズになります。)Note; Dimensions of C, L and M for alloy steel and stainless steel products deviate from the above dimensions. (contact us)
イハラ_高圧管継手_170525.indd 15 2017/06/21 11:56
16
単位:mm/unit: mm継手の呼びPart No.
呼び径Nominal sizes
タイプType B B1 C D E M L 重量(kg)
Weight (kg)
WRM 差込み溶接形管継手/Socket Weld Pipe Fittingsレジューシングインサート WRM/Reducing Insert WRM
タイプ1/Type 1
タイプ2/Type 2
タイプ3/Type 3
接続例/Example of Connection
イハラ_高圧管継手_170525.indd 16 2017/06/21 11:56
17
SLD・SLE・STD 差込み溶接形管継手/Socket Weld Pipe Fittings単位:mm/unit: mm
継手の呼びPart No.
呼び径Nominal sizes B C D M A L T
(Rc)重量(kg)Weight (kg)
単位:mm/unit: mm継手の呼びPart No.
呼び径Nominal sizes B C D M A L T
(Rc)重量(kg)Weight (kg)
単位:mm/unit: mm継手の呼びPart No.
呼び径Nominal sizes B C D M A L L1 T
(Rc)重量(kg)Weight (kg)
注) 合金鋼、ステンレス鋼についてはC、L、M寸法が異なります。炭素鋼以外は寸法が異なるので、都度お問い合わせください。(Jシリーズになります。)
Note; Dimensions of C, L and M for alloy steel and stainless steel products deviate from the above dimensions. (contact us)
注) 合金鋼、ステンレス鋼についてはC、L、M寸法が異なります。炭素鋼以外は寸法が異なるので、都度お問い合わせください。(Jシリーズになります。)
Note; Dimensions of C, L and M for alloy steel and stainless steel products deviate from the above dimensions. (contact us)
注) 合金鋼、ステンレス鋼についてはC、L、M寸法が異なります。炭素鋼以外は寸法が異なるので、都度お問い合わせください。(Jシリーズになります。)
Note; Dimensions of C, L and M for alloy steel and stainless steel products deviate from the above dimensions. (contact us)
特殊45°エルボ SLE/Special 45°Elbow SLE
特殊ティー STD/Special Tee STD
特殊90°エルボ SLD/Special 90°Elbow SLD
イハラ_高圧管継手_170525.indd 17 2017/06/21 11:56
18
単位:mm/unit: mm継手の呼びPart No.
呼び径Nominal sizes B C L H(六角)
H (HEX)T(Rc)
重量(kg)Weight (kg)
単位:mm/unit: mm継手の呼びPart No.
呼び径Nominal sizes B C D M A L 重量(kg)
Weight (kg)
単位:mm/unit: mm継手の呼びPart No.
呼び径Nominal sizes D M L T
(Rc)重量(kg)Weight (kg)
SFD・WLE・SLF 差込み溶接形管継手/Socket Weld Pipe Fittings特殊カップリング SFD/Special Coupling SFD
シリンダ用エルボ WLF/Cylinder Elbow WLF
シリンダ用エルボ SLF/Cylinder Elbow SLF
注) 合金鋼、ステンレス鋼についてはC、L、M寸法が異なります。炭素鋼以外は寸法が異なるので、都度お問い合わせください。(Jシリーズになります。)
Note; Dimensions of C, L and M for alloy steel and stainless steel products deviate from the above dimensions. (contact us)
注) 合金鋼、ステンレス鋼についてはC、L、M寸法が異なります。炭素鋼以外は寸法が異なるので、都度お問い合わせください。(Jシリーズになります。)
Note; Dimensions of C, L and M for alloy steel and stainless steel products deviate from the above dimensions. (contact us)
イハラ_高圧管継手_170525.indd 18 2017/06/21 11:56
19
WBA・WBR 差込み溶接形管継手/Socket Weld Pipe Fittings単位:mm/unit: mm
継手の呼びPart No.
呼び径Nominal sizes B C D M L 重量(kg)
Weight (kg)
単位:mm/unit: mm継手の呼びPart No.
呼び径Nominal sizes B C D M L R 重量(kg)
Weight (kg)
ボスA形 WBA/Boss Type A WBA
ボスR形 WBR/Boss Type R WBR
イハラ_高圧管継手_170525.indd 19 2017/06/21 11:56
20
単位:mm/unit: mm継手の呼びPart No.
呼び径Nominal sizes B C M L 重量(kg)
Weight (kg)
WCA 差込み溶接形管継手/Socket Weld Pipe Fittingsキャップ WCA/Cap WCA
イハラ_高圧管継手_170525.indd 20 2017/06/21 11:56
21
単位:mm/unit: mm継手の呼びPart No.
T(Rc) M L 重量(kg)
Weight (kg)
SLA・SLC ねじ込み形管継手/Threaded Pipe Fittings90°エルボ SLA/90°Elbow SLA
単位:mm/unit: mm継手の呼びPart No.
T(R×Rc) d M L L1 重量(kg)
Weight (kg)
注) 合金鋼、ステンレス鋼についてはL寸法が異なります。炭素鋼以外は寸法が異なるので、都度お問い合わせください。(Jシリーズになります。)
Note; L dimension for alloy steel and stainless steel is not the same. Stainless steel products deviate from the above dimensions. (contact us)
注) 合金鋼、ステンレス鋼についてはL寸法が異なります。炭素鋼以外は寸法が異なるので、都度お問い合わせください。(Jシリーズになります。)
Note; L dimension for alloy steel and stainless steel is not the same. Stainless steel products deviate from the above dimensions. (contact us)
○P処理品/Parkerizing
○○○○○○
メスオスエルボ SLC/Street Elbow SLC
イハラ_高圧管継手_170525.indd 21 2017/06/21 11:56
22
単位:mm/unit: mm継手の呼びPart No.
T(Rc) M L 重量(kg)
Weight (kg)
単位:mm/unit: mm継手の呼びPart No.
T(Rc) M L 重量(kg)
Weight (kg)
SLB・STA ねじ込み形管継手/Threaded Pipe Fittings45°エルボ SLB/45°Elbow SLB
注) 合金鋼、ステンレス鋼についてはL寸法が異なります。炭素鋼以外は寸法が異なるので、都度お問い合わせください。(Jシリーズになります。)
Note; L dimension for alloy steel and stainless steel is not the same. Stainless steel products deviate from the above dimensions. (contact us)
注) 合金鋼、ステンレス鋼についてはL寸法が異なります。炭素鋼以外は寸法が異なるので、都度お問い合わせください。(Jシリーズになります。)
Note; L dimension for alloy steel and stainless steel is not the same. Stainless steel products deviate from the above dimensions. (contact us)
ティー STA/Tee STA
イハラ_高圧管継手_170525.indd 22 2017/06/21 11:56
23
単位:mm/unit: mm継手の呼びPart No.
T×T1(Rc)
H(六角)H (HEX) L 重量(kg)
Weight (kg)
単位:mm/unit: mm継手の呼びPart No.
T(Rc)
H(六角)H (HEX) L 重量(kg)
Weight (kg)
SFC・SRC ねじ込み形管継手/Threaded Pipe Fittingsカップリング SFC/Coupling SFC
レジューサ SRC/Reducer SRC
注) 合金鋼、ステンレス鋼についてはL寸法が異なります。炭素鋼以外は寸法が異なるので、都度お問い合わせください。(Jシリーズになります。)
Note; L dimensions for alloy steel and stainless steel products deviate from the above dimensions. (contact us)
注) 合金鋼、ステンレス鋼についてはL寸法が異なります。炭素鋼以外は寸法が異なるので、都度お問い合わせください。(Jシリーズになります。)
Note; L dimensions for alloy steel and stainless steel products deviate from the above dimensions. (contact us)
イハラ_高圧管継手_170525.indd 23 2017/06/21 11:56
24
単位:mm/unit: mm継手の呼びPart No.
T(R) d H(六角)
H (HEX) ℓ ℓ1 重量(kg)Weight (kg)
単位:mm/unit: mm継手の呼びPart No.
T×T1(R×Rc)
H(六角)H (HEX) ℓ ℓ1 重量(kg)
Weight (kg)
SBU・SNP ねじ込み形管継手/Threaded Pipe Fittingsブッシング SBU/Bushing SBU
ニップル SNP/Nipple SNP
○P処理品/Parkerizing
○P処理品/Parkerizing
○○○○○○○○○○○○○○○○○○○○
○○○○○○
イハラ_高圧管継手_170525.indd 24 2017/06/21 11:56
25
単位:mm/unit: mm継手の呼びPart No.
T(R×Rc) d L H(六角)
H (HEX)重量(kg)Weight (kg)
単位:mm/unit: mm継手の呼びPart No.
T×T1(R) d H(六角)
H (HEX) ℓ ℓ1 ℓ2重量(kg)Weight (kg)
SRN・SSS ねじ込み形管継手/Threaded Pipe Fittings径違いニップル SRN/Reducing Nipple SRN
メスオスソケットA形 SSS/Street Socket Type A SSS
○P処理品/Parkerizing
○P処理品/Parkerizing
○○○○○○○○○○○○○○○○○
○○○○○○
イハラ_高圧管継手_170525.indd 25 2017/06/21 11:56
26
単位:mm/unit: mm継手の呼びPart No.
T1×T2(R×Rc) d L H(六角)
H (HEX)重量(kg)Weight (kg)
単位:mm/unit: mm継手の呼びPart No.
T1(G)
T2(Rc) d K ℓ1 L H(六角)
H (HEX)O-Ring
重量(kg)Weight (kg)
単位:mm/unit: mm継手の呼びPart No.
T(R) H L A 重量(kg)
Weight (kg)
SSS・SSF・SPA ねじ込み形管継手/Threaded Pipe FittingsメスオスソケットB形 SSS/Street Socket Type B SSS
メスオスソケットC形 SSF/Street Socket Type C SSF
六角穴付プラグ SPA/Hollow hex Plug SPA
材質:炭素鋼/Material: S45C or S25CAは基準径の位置を示す。/A indicates the position of standard bore
○P処理品/Parkerizing
◆黒染/Triiron tetraoxide
○○○○○
◆◆◆◆◆◆◆◆◆
イハラ_高圧管継手_170525.indd 26 2017/06/21 11:56
27
単位:mm/unit: mm継手の呼びPart No.
T(R) H ℓ1 ℓ2
重量(kg)Weight (kg)
単位:mm/unit: mm継手の呼びPart No.
T(G) ℓ1 ℓ2 K H(六角)
H (HEX)O-Ring
重量(kg)Weight (kg)
SPB・SPE・SPC ねじ込み形管継手/Threaded Pipe Fittings単位:mm/unit: mm
継手の呼びPart No.
T(R)
H(六角)H (HEX) ℓ ℓ1
重量(kg)Weight (kg)
六角プラグ(テーパねじ) SPB/Hexagon Head Plug SPB
六角プラグ(平行ねじ) SPE/Hexagon Head Plug SPE
四角頭付プラグ SPC/Square Head Plug SPC
材質:炭素鋼/Material: S10 or S25C
○P処理品/Parkerizing
○P処理品/Parkerizing
○○○○○○
○○○○○○
イハラ_高圧管継手_170525.indd 27 2017/06/21 11:56
28
単位:mm/unit: mm継手の呼びPart No.
T(Rc) M L 重量(kg)
Weight (kg)
単位:mm/unit: mm継手の呼びPart No.
サイズSIZE
T(Rc) M L R 重量(kg)
Weight (kg)
SBA・SBR ねじ込み形管継手/Threaded Pipe FittingsボスA形 SBA/Boss Type A SBA
ボスR形 SBR/Boss Type R SBR
イハラ_高圧管継手_170525.indd 28 2017/06/21 11:56
29
SCA・SMC ねじ込み形管継手/Threaded Pipe Fittings単位:mm/unit: mm
継手の呼びPart No.
T(Rc)
H(六角)H (HEX) L 重量(kg)
Weight (kg)
単位:mm/unit: mm継手の呼びPart No.
T(Rc) M L 重量(kg)
Weight (kg)
キャップ SCA/Cap SCA
丸ソケット SMC/Socket SMC
注) 炭素鋼以外は寸法が異なるので、都度お問い合わせください。(Jシリーズになります。)Note; Stainless steel products deviate from the above dimensions. (contact us)
注) 炭素鋼以外は寸法が異なるので、都度お問い合わせください。(Jシリーズになります。)Note; Stainless steel products deviate from the above dimensions. (contact us)
0.0420.0560.0590.150.180.360.530.791.16
0.0620.0790.160.210.340.470.620.89
イハラ_高圧管継手_170525.indd 29 2017/06/21 11:56
30
単位:mm/unit: mm継手の呼びPart No.
H1(六角)H1 (HEX)
H2(六角)H2 (HEX) L T1
(R)T2(G)
適用ガスケットApplicable Gasket
重量(kg)Weight (kg)
単位:mm/unit: mm継手の呼びPart No.
T(R) D d h(六角穴)
h (HEX Hole)H1(六角)H1 (HEX)
H(六角)H (HEX) L
鋼球Nominal Sizes of Steel Ball
重量(kg)Weight (kg)
SAP・SGA ねじ込み形管継手/Threaded Pipe Fittingsエアー抜きバルブ SAP/Air Bleeding Valve SAP
注) 適用ガスケット材質:サイズ 1/4:クロム皮3/8、1/2:JIS B2401-1B(Oリング)
炭素鋼以外は寸法が異なるので、都度お問い合わせください。(Jシリーズになります。)Note; Applicable gascket material: Size 1/4: Chrome skin
Size 3/8, 1/2: JIS B2401-1B (O-ring) Stainless steel products deviate from the above dimensions. (contact us)
圧力計用アダプタ SGA/Adapter for Pressure Gauge SGA注) 炭素鋼以外は寸法が異なるので、都度お問い合わせください。(Jシリーズになります。)Note; Stainless steel products deviate from the above dimensions. (contact us)
イハラ_高圧管継手_170525.indd 30 2017/06/21 11:56
31
単位:mm/unit: mm継手の呼びPart No.
呼び径Nominal sizes B C D M L H(八角)
H (OCT) S O-Ring 重量(kg)Weight (kg)
WUA 差込み溶接形管継手/Socket Weld Pipe FittingsユニオンA形 WUA/Union Type A WUA
注) O-RingはJIS B2401-1Bです。定格圧力:21MPa(210kgf/cm2) 使用温度:120℃以下
炭素鋼以外は寸法が異なるので、都度お問い合わせください。(Jシリーズになります。)Note; O-ring is JIS B2401-1B. Rated pressure: 21MPa (210kgf/cm2)
Operating temperature: Less than 120℃Stainless steel products deviate from the above dimensions. (contact us)
イハラ_高圧管継手_170525.indd 31 2017/06/21 11:56
32
単位:mm/unit: mm継手の呼びPart No.
呼び径Nominal sizes B C d M ℓ L L1 N H(八角)
H (OCT)T (R) S O-Ring 重量(kg)
Weight (kg)
単位:mm/unit: mm継手の呼びPart No.
呼び径Nominal sizes B C d M L H(八角)
H (OCT)H1(六角)H1 (HEX)
T (R) S O-Ring 重量(kg)
Weight (kg)
WUB・WUC 差込み溶接形管継手/Socket Weld Pipe FittingsユニオンB形 WUB/Union Type B WUB
本体材質:S45C/Body material: S45C注) O-RingはJIS B2401-1Bです。定格圧力:21MPa(210kgf/cm2)
使用温度:120℃以下炭素鋼以外は寸法が異なるので、都度お問い合わせください。(Jシリーズになります。)
Note; O-ring is JIS B2401-1B. Rated pressure: 21MPa (210kgf/cm2)Operating temperature: Less than 120℃ Stainless steel products deviate from the above dimensions. (contact us)
ユニオンC形 WUC/Union Type C WUC
注) O-RingはJIS B2401-1Bです。定格圧力:21MPa(210kgf/cm2) 使用温度:120℃以下 ステンレス鋼についてはナットの形状は1B(08)までは六角とします。又、本体についても形状寸法が異なります。
炭素鋼以外は寸法が異なるので、都度お問い合わせください。(Jシリーズになります。)Note; O-ring is JIS B2401-1B. Rated pressure: 21MPa (210kgf/cm2)
Operating temperature: Less than 120℃For stainless steel, the nut confi guration up to 1B (08) is hex. Also the confi guration and dimension of the body are not the same. Stainless steel products deviate from the above dimensions. (contact us)
◎略図中「Ⓐ本体」P処理/「ⒶBody」Parkerizing
◎略図中「Ⓐ本体」P処理/「ⒶBody」Parkerizing
◎◎◎◎◎◎◎◎◎◎◎◎
◎◎◎◎◎◎◎◎◎◎◎◎
イハラ_高圧管継手_170525.indd 32 2017/06/21 11:56
33
単位:mm/unit: mm継手の呼びPart No.
呼び径Nominal sizes B C d K M ℓ L H(八角)
H (OCT)H1(六角)H1 (HEX)
T (G) S O-
Ring重量(kg)Weight (kg)
単位:mm/unit: mm継手の呼びPart No.
呼び径Nominal sizes B C D M ℓ L L1 H(八角)
H (OCT) S O-Ring N 重量(kg)Weight (kg)
WUD・WUH 差込み溶接形管継手/Socket Weld Pipe FittingsユニオンD形 WUD/Union Type D WUD
注) O-RingはJIS B2401-1Bです。定格圧力:21MPa(210kgf/cm2) 使用温度:120℃以下 炭素鋼以外は寸法が異なるので、都度お問い合わせください。(Jシリーズになります。)
Note; O-ring is JIS B2401-1B. Rated pressure: 21MPa (210kgf/cm2)Operating temperature: Less than 120℃Stainless steel products deviate from the above dimensions. (contact us)
ユニオンH形 WUH/Union Type H WUH
本体材質:S45C/Body material: S45C注) O-RingはJIS B2401-1Bです。定格圧力:21MPa(210kgf/cm2)
使用温度:120℃以下炭素鋼以外は寸法が異なるので、都度お問い合わせください。(Jシリーズになります。)
Note; O-ring is JIS B2401-1B. Rated pressure: 21MPa (210kgf/cm2)Operating temperature: Less than 120℃Stainless steel products deviate from the above dimensions. (contact us)
イハラ_高圧管継手_170525.indd 33 2017/06/21 11:56
34
単位:mm/unit: mm継手の呼びPart No.
呼び径Nominal sizes B C D M L N(八角)
N (OCT)H(八角)H (OCT) S T
(R)O-Ring
重量(kg)Weight (kg)
単位:mm/unit: mm継手の呼びPart No.
T (Rc)
N(八角)N (OCT) L H(八角)
H (OCT) S O-Ring 重量(kg)Weight (kg)
SUA・WUF ねじ込み形管継手/Threaded Pipe Fittingsユニオン SUA/Union SUA
注) O-RingはJIS B2401-1Bです。定格圧力:21MPa(210kgf/cm2) 使用温度:120℃以下
炭素鋼以外は寸法が異なるので、都度お問い合わせください。(Jシリーズになります。)Note; O-ring is JIS B2401-1B. Rated pressure: 21MPa (210kgf/cm2)
Operating temperature: Less than 120℃Stainless steel products deviate from the above dimensions. (contact us)
ユニオンF形 WUF/Union Type F WUF
注) O-RingはJIS B2401-1Bです。定格圧力:21MPa(210kgf/cm2) 使用温度:120℃以下
炭素鋼以外は寸法が異なるので、都度お問い合わせください。(Jシリーズになります。)Note; O-ring is JIS B2401-1B. Rated pressure: 21MPa (210kgf/cm2)
Operating temperature: Less than 120℃Stainless steel products deviate from the above dimensions. (contact us)
イハラ_高圧管継手_170525.indd 34 2017/06/21 11:56
35
FA-A 油圧用21MPa管フランジ JIS B2291-1994準拠Pipe Flange for 21MPa Hydraulic Use Based on JIS B2291-1994
油圧用21MPa管フランジ FA-A/Pipe Flange Assembly for 21MPa Hydraulic Use FA-A
この表によるものは、 { FA-HA-(各種)(P.36)FA-HB-(各種)(P.36)} を一組としたもので、ボルトの強さは8Tであります。This table shows when { FA-HA-(all types)(P36)FA-HB-(all types)(P36) } are as a set, and the bolt strength is 8T.注)炭素鋼以外は寸法が異なるので、都度お問い合わせください。(Jシリーズになります。)Note; Stainless steel products deviate from the above dimensions. (contact us)
単位:mm/unit: mm継手の呼びPart No.
対応する管の呼びNominal sizes of matching tubes A 最大A'
Max A' B C d d2 d3 e f r ボルトBOLT
O-RingJIS B2401-B
重量(kg)Weight (kg)
FA-A形/FA-A type
鍛造による場合の形状Confi guration by forging
イハラ_高圧管継手_170525.indd 35 2017/06/21 11:56
36
FA-HA・FA-HB 油圧用21MPa管フランジ JIS B2291-1994準拠Pipe Flange for 21MPa Hydraulic Use Based on JIS B2291-1994
油圧用21MPa管フランジ FA-HA・FA-HB/Pipe Flange for 21MPa Hydraulic Use FA-HA・FA-HB
この表によるものは単体で取り扱い、参考として示したボルト及びO-Ringは標準付属いたしません。Items of this table are to be treated as individual items, and the bolts and O-Ring Listed as reference are not included as standard accessories.
注)炭素鋼以外は寸法が異なるので、都度お問い合わせください。(Jシリーズになります。)Note; Stainless steel products deviate from the above dimensions. (contact us)
単位:mm/unit: mm
継手の呼びPart No.
相当するJISの呼び方Equivalent JIS description
対応する管の呼びNominal sizes of matching tubes
A 最大A'Max A' B C d d1 d2 d3 d4 e f r
参考/ReferenceボルトBOLT O-Ring
FA-HA形/FA-HA type
単位:mm/unit: mm
継手の呼びPart No.
相当するJISの呼び方Equivalent JIS description
対応する管の呼びNominal sizes of matching tubes
A 最大A'Max A' B C d d2 d3 d4 e f r
参考/ReferenceボルトBOLT O-Ring
FA-HB形/FA-HB type
鍛造による場合の形状Confi guration by forging
4-d4穴4-d4Hole
FA-HA形FA-HA Type
FA-HB形FA-HB Type
イハラ_高圧管継手_170525.indd 36 2017/06/21 11:56
37
FA-SA・FA-SB 油圧用21MPa管フランジ JIS B2291-1994準拠Pipe Flange for 21MPa Hydraulic Use Based on JIS B2291-1994
油圧用21MPa管フランジ FA-SA・FA-SB/Pipe Flange for 21MPa Hydraulic Use FA-SA・FA-SB
この表によるものは単体で取り扱い、参考として示したボルト及びO-Ringは標準付属いたしません。Items of this table are to be treated as individual items, and the bolts and O-Ring Listed as reference are not included as standard accessories.
注)炭素鋼以外は寸法が異なるので、都度お問い合わせください。(Jシリーズになります。)Note; Stainless steel products deviate from the above dimensions. (contact us)
単位:mm/unit: mm
継手の呼びPart No.
相当するJISの呼び方Equivalent JIS description
対応する管の呼びNominal sizes of matching tubes
A 最大A'Max A' B C d d1 d2 d3 d4 e f r
参考/ReferenceボルトBOLT O-Ring
FA-SA形/FA-SA type
単位:mm/unit: mm'
継手の呼びPart No.
相当するJISの呼び方Equivalent JIS description
対応する管の呼びNominal sizes of matching tubes
A 最大A'Max A' B C d d2 d3 e d5 f r
参考/ReferenceボルトBOLT O-Ring
FA-SB形/FA-SB type
鍛造による場合の形状Confi guration by forging
4-d4穴4-d4Hole
( FA-SB形の場合にはd4はd5のMねじになります。In case of FA-SB, d4 will be M thread of d5. )FA-SA形FA-SA Type
FA-SB形FA-SB Type
イハラ_高圧管継手_170525.indd 37 2017/06/21 11:56
4-d4穴4-d4Hole
38
FA-LA 油圧用21MPa管フランジ JIS B2291-1994準拠Pipe Flange for 21MPa Hydraulic Use Based on JIS B2291-1994
油圧用21MPa管フランジ FA-LA/Pipe Flange for 21MPa Hydraulic Use FA-LA
この表によるものは単体で取り扱い、参考として示したボルト及びO-Ringは標準付属いたしません。Items of this table are to be treated as individual items, and the bolts and O-Ring Listed as reference are not included as standard accessories.
注)炭素鋼以外は寸法が異なるので、都度お問い合わせください。(Jシリーズになります。)Note; Stainless steel products deviate from the above dimensions. (contact us)
単位:mm/unit: mm
継手の呼びPart No.
相当するJISの呼び方Equivalent JIS description
対応する管の呼びNominal sizes of matching tubes
A A1 B C h d d1 d2 d3 d4 e f r参考/ReferenceボルトBOLT O-Ring
FA-LA形/FA-LA type
イハラ_高圧管継手_170525.indd 38 2017/06/21 11:56
39
FA-YA・FA-YB 油圧用280K管フランジ JIS F7806-1996準拠Pipe Flange for 280K Hydraulic Use Based on JIS F7806-1996
油圧用280K管フランジ FA-YA・FA-YB/Pipe Flange for 280K Hydraulic Use FA-YA・FA-YB
この表によるものは単体で取り扱い、参考として示したボルト及びO-Ringは標準付属いたしません。Items of this table are to be treated as individual items, and the bolts and O-Ring Listed as reference are not included as standard accessories.
注)炭素鋼以外は寸法が異なるので、都度お問い合わせください。(Jシリーズになります。)Note; Stainless steel products deviate from the above dimensions. (contact us)
単位:mm/unit: mm
継手の呼びPart No.
相当するJISの呼び方Equivalent JIS description
対応する管の呼びNominal sizes of matching tubes
A 最大A'Max A' B C d d1 d2 d3 d4 e f r
参考/Reference 重量(kg)Weight (kg)ボルト
BOLT O-Ring
FA-YA形/FA-YA type
単位:mm/unit: mm
継手の呼びPart No.
相当するJISの呼び方Equivalent JIS description
対応する管の呼びNominal sizes of matching tubes
A 最大A'Max A' B C d d2 d3 d4 e f r
参考/Reference 重量(kg)Weight (kg)ボルト
BOLT O-Ring
FA-YB形/FA-YB type
鍛造による場合の形状Confi guration by forging
4-d4穴4-d4Hole
FA-YA形FA-YA Type
FA-YB形FA-YB Type
イハラ_高圧管継手_170525.indd 39 2017/06/21 11:56
40
FA-ZA・FA-ZB油圧用350K管フランジ FA-ZA・FA-ZB/Pipe Flange for 350K Hydraulic Use FA-ZA・FA-ZB
この表によるものは単体で取り扱い、参考として示したボルト及びO-Ringは標準付属いたしません。Items of this table are to be treated as individual items, and the bolts and O-Ring Listed as reference are not included as standard accessories.
注)炭素鋼以外は寸法が異なるので、都度お問い合わせください。(Jシリーズになります。)Note; Stainless steel products deviate from the above dimensions. (contact us)
単位:mm/unit: mm
継手の呼びPart No.
相当するJISの呼び方Equivalent JIS description
対応する管の呼びNominal sizes of matching tubes
A 最大A'Max A' B C d d1 d2 d3 d4 e f r
参考/Reference 重量(kg)Weight (kg)ボルト
BOLT O-Ring
FA-ZA形/FA-ZA type
単位:mm/unit: mm
継手の呼びPart No.
相当するJISの呼び方Equivalent JIS description
対応する管の呼びNominal sizes of matching tubes
A 最大A'Max A' B C d d2 d3 d4 e f r
参考/Reference 重量(kg)Weight (kg)ボルト
BOLT O-Ring
FA-ZB形/FA-ZB type
鍛造による場合の形状Confi guration by forging
4-d4穴4-d4Hole
FA-ZA形FA-ZA Type
FA-ZB形FA-ZB Type
イハラ_高圧管継手_170525.indd 40 2017/06/21 11:56
油圧用350K管フランジ JIS F7806-1996準拠Pipe Flange for 350K Hydraulic Use Based on JIS F7806-1996
41
FA-WA・FA-WB 油圧用35MPa(350kgf/cm2)突合せ溶接式管フランジ FAS 103-1996準拠Butt Welding Type Pipe Flange for 35MPa (350kgf/cm2) Hydraulic Use Based on FAS 103-1996
油圧用35MPa管フランジ FA-WA・FA-WB/Pipe Flange for 35MPa (350kgf/cm2) Hydraulic Use FA-WA・FA-WB
この表によるものは単体で取り扱い、参考として示したボルト及びO-Ringは標準付属いたしません。Items of this table are to be treated as individual items, and the bolts and O-Ring Listed as reference are not included as standard accessories.
注)炭素鋼以外は寸法が異なるので、都度お問い合わせください。(Jシリーズになります。)Note; Stainless steel products deviate from the above dimensions. (contact us)
単位:mm/unit: mm
継手の呼びPart No.
相当するJISの呼び方Equivalent JIS description
対応する管の呼びNominal sizes of matching tubes
A0
-0.5 B C+10 D G T h Y r n-d d1
参考/Reference 重量(kg)Weight (kg)ボルト
BOLT O-Ring
FA-WA形/FA-WA type
単位:mm/unit: mm
継手の呼びPart No.
相当するJISの呼び方Equivalent JIS description
対応する管の呼びNominal sizes of matching tubes
A0
-0.5 B C+10D G T h Y r n-d
参考/Reference 重量(kg)Weight (kg)ボルト
BOLT O-Ring
FA-WB形/FA-WB type
n-φd穴n-φdHole
n-φd穴n-φdHoleFA-WA形
FA-WA TypeFA-WB形FA-WB Type
( ルート面の高さHeight of root surface )
イハラ_高圧管継手_170525.indd 41 2017/06/21 11:56
42
管継手の主要材料表と材料記号LIST OF MAIN MATERIAL AND MATERIAL SYMBOLS FOR TUBE FITTINGS
参考資料REFERENCE
※1) PT410については、JIS B8243(圧力容器の構造)及び高圧ガス取締法の技術基準(告示第350号)を適用する場合にはS25Cとご指定ください。※2) ※印の化学成分及び機械的性質は社内基準でASTM規格とは若干異なります。※1) In regards 10 PT410, it is rquested that S25C is specifi ed in case JIS B8243 (construction of preasure vessel) and technical standard for high pressure gas regulation (Notice No.350) should apply.
※2) Chemical compositiono of marked※ is based on IHARA's original standard and slight diff erent from ASTM Standard.
区 分Division
該当するJISの鋼管Applicable JIS steel tubes
管継手の材質Tube fi ttings material
管継手の材料記号Tube fi ttings
material symbols
化学成分%/Chemical composition %
C Si Mn P S Ni
炭 素 鋼Carbon steel
合 金 鋼Alloy steel
ステンレス鋼Stainlesssteel
低温用鋼Low temperature
steel
化学成分%/Chemical composition % 機械的性質/Mechanical Properties
Cr Mo Cu Ni その他Others
耐力又は降伏点Yield StrengthN/mm2
引張強さTensil Strength
N/mm2伸び
Elongation%
絞りReduction of Area
%硬さHB
Hardness HB
管継手の主要材料表/List of Main Material for Tube Fittings
イハラ_高圧管継手_170525.indd 42 2017/06/21 11:56
43
管継手の主要材料表と材料記号LIST OF MAIN MATERIAL AND MATERIAL SYMBOLS FOR TUBE FITTINGS
参考資料REFERENCE
区分/Division 材料による種類の記号/Type symbol by material 対応する鋼管/Corresponding steel tubes 摘要/Application
炭 素 鋼Carbon steel
圧力配管用For pressurized piping
高温配管用For high temperature piping
低温配管用For low temperature piping
合 金 鋼Alloy steel
高温配管用For high temperature piping
低温配管用For low temperature piping
ステンレス鋼Stainless steel
耐食及び高温配管用SUS329J1、SUS329J3L、SUS329J4L、SUS405及びSUS430を除き、低温配管用としても使用できる。For corrosion resistance and high temperature piping.Can be used for low temperature piping except SUS329J1, SUS329J3L, SUS329J4L, and SUS405
材料による種類の記号及び対応する鋼管/Type symbols by material and corresponding steel tubes
イハラ_高圧管継手_170525.indd 43 2017/06/21 11:56
44
関連材料対比表COMPARISON TABLE OF RELATED MATERIALこの対比表による各種材質は同一ではなく、類似を意味します。The material of this comparison table are not identical but indicate equivalent material.
参考資料REFERENCE
区 分Division
鋼 種Steel
JIS規格Type of JIS standard
ASTM規格ASTM standard
鋼 管Steel tube
管継手材料記号Tube fi tting
material symbols
鍛 造 材Forged material
鋼 管Steel tube
鋼 板Steel Plate
炭 素 鋼Carbon steel
普通炭素鋼Common carbon steel
Siキルド炭素鋼Si killed carbon steel
合 金 鋼Alloy steel
½Mo鋼1/2 Mo steel
1Cr-½ Mo鋼1Cr-1/2 Mo steel
1¼Cr-½ Mo鋼1-1/4Cr-1/2 Mo steel
2¼Cr-1 Mo鋼2-1/4Cr-1 Mo steel
5Cr-½ Mo鋼5Cr-1/2 Mo steel
9Cr-1 Mo鋼9Cr-1 Mo steel
低温用鋼Low
temperature steel
Aℓキルド鋼Aℓ killed steel
3½ Ni鋼3-1/2 Ni steel
ステンレス鋼Stainless steel
18-8 ステンレス鋼18-8 stainless steel
高温用18-8 ステンレス鋼18-8 stainless steel for high temperature
低炭素18-8 ステンレス鋼Low carbon 18-8 stainless steel
22-12 ステンレス鋼22-12 stainless steel
22-20 ステンレス鋼22-20 stainless steel
18-8-(Nb+Ta) ステンレス鋼18-8-(Nb+Ta) stainless steel
18-8-Mo ステンレス鋼18-8-Mo stainless steel
高温用18-8-Mo ステンレス鋼18-8-Mo stainless steel for high temperature
低炭素18-8-Mo ステンレス鋼Low carbon 18-8-Mo stainless steel
18-8-Ti ステンレス鋼18-8-Ti stainless steel
高温用18-8-Ti ステンレス鋼18-8-Ti stainless steel for high temperature
高温用18-8-(Nb+Ta) ステンレス鋼18-8-(Nb+Ta) stainless steel for high temperature
25-5 Mo ステンレス鋼25-5 Mo Stainless steel
イハラ_高圧管継手_170525.indd 44 2017/06/21 11:56
45
基準寸法 単位: mm
ねじの呼びねじ山数
(25.4mmにつき)n
ピッチp
(参考)ねじ山の高さ
h
山の山頂及び谷の丸みr
おねじ外径d
有効径d2
谷の径d1
めねじ谷の径D
有効径D2
内径D1
G⅛ 28 0.9071 0.581 0.12 9.728 9.147 8.566
G¼ 19 1.3368 0.856 0.18 13.157 12.301 11.445
G⅜ 19 1.3368 0.856 0.18 16.662 15.806 14.950
G½ 14 1.8143 1.162 0.25 20.955 19.793 18.631
G¾ 14 1.8143 1.162 0.25 26.441 25.279 24.117
G1 11 2.3091 1.479 0.32 33.249 31.770 30.291
G1¼ 11 2.3091 1.479 0.32 41.910 40.431 38.952
G1½ 11 2.3091 1.479 0.32 47.803 46.324 44.845
G2 11 2.3091 1.479 0.32 59.614 58.135 56.656
G2½ 11 2.3091 1.479 0.32 75.184 73.705 72.226
G3 11 2.3091 1.479 0.32 87.884 86.405 84.926
寸法許容差 単位:µm
ねじの呼び
ねじ山数
[ ]25.4mmにつきn
おねじ めねじ外径d
有効径d2
谷の径d1
谷の径D
有効径D2
内径D1
上の許容差
下の許容差
上の許容差
下の許容差 上の許容差
下の許容差
下の許容差
上の許容差
下の許容差
上の許容差
下の許容差
上の許容差A級 B級
G⅛ 28 0 -214 0 -107 -214 0
規定しない
0
規定しない
0 +107 0 +282
G¼ 19 0 -250 0 -125 -250 0 0 0 +125 0 +445
G⅜ 19 0 -250 0 -125 -250 0 0 0 +125 0 +445
G½ 14 0 -284 0 -142 -284 0 0 0 +142 0 +541
G¾ 14 0 -284 0 -142 -284 0 0 0 +142 0 +541
G1 11 0 -360 0 -180 -360 0 0 0 +180 0 +640
G1¼ 11 0 -360 0 -180 -360 0 0 0 +180 0 +640
G1½ 11 0 -360 0 -180 -360 0 0 0 +180 0 +640
G2 11 0 -360 0 -180 -360 0 0 0 +180 0 +640
G2½ 11 0 -434 0 -217 -434 0 0 0 +217 0 +640
G3 11 0 -434 0 -217 -434 0 0 0 +217 0 +640
基準山形 寸法許容差
参考資料REFERENCE
イハラ_高圧管継手_170525.indd 45 2017/06/21 11:56
46
寸法許容差 単位:mm
ねじの呼び
ねじ山 基準径 基準径の位置
平行めねじのD,D2及びD1の許容差
有効ねじ部の長さ(最小)
配管用炭素鋼鋼管の寸法
(参考)ねじ山数
[ ]25.4mmにつきn
ピッチp
(参考)
山の高さh
丸みr又はr'
おねじ おねじ めねじ おねじ めねじ
外径d
有効径d2
谷の径d1 管端から 管端部
基準径の位置から大径側に向かってf
不完全ねじ部がある場合
不完全ねじ部がない場合
めねじ
基準の長さa
軸線方向の許容差b
軸線方向の許容差c
テーパめねじ
平行めねじ
テーパめねじ,平行めねじ
谷の径D
有効径D2
内径D1
基準径の位置から小径側に向かってl
管又は管継手端からI'
基準径又は管・管継手端からt
外径 厚さ
G⅛ 28 0.9071 0.581 0.12 9.728 9.147 8.566 3.97 土0.91 士1.13 土0.071 2.5 6.2 7.4 4.4 10.5 2.0
G¼ 19 1.3368 0.856 0.18 13.157 12.301 11.455 6.01 士1.34 土1.67 士0.104 3.7 9.4 11.0 6.7 13.8 2.3
G⅜ 19 1.3368 0.856 0.18 16.662 15.806 14.950 6.35 士1.34 土1.67 士0.104 3.7 9.7 11.4 7.0 17.3 2.3
G½ 14 1.8143 1.162 0.25 20.955 19.793 18.631 8.16 士1.81 土2.27 士0.142 5.0 12.7 15.0 9.1 21.7 2.8
G¾ 14 1.8143 1.162 0.25 26.441 25.279 24.117 9.53 士1.81 土2.27 士0.142 5.0 14.1 16.3 10.2 27.2 2.8
G1 11 2.3031 1.479 0.32 33.249 31.770 30.291 10.39 士2.31 土2.89 土0.181 6.4 16.2 19.0 11.5 34.0 3.2
G1¼ 11 2.3091 1.479 0.32 41.910 40.431 38.952 12.70 士2.31 士2.89 士0.181 6.4 18.5 21.4 13.4 42.7 3.5
G1½ 11 2.3091 1.479 0.32 47.803 46.324 44.845 12.70 土2.31 土2.89 士0.181 6.4 18.5 21.4 13.4 48.6 3.5
G2 11 2.3090 1.479 0.32 59.614 58.135 56.656 15.88 土2.31 士2.89 土0.181 7.5 22.8 25.7 16.9 60.5 3.8
G2½ 11 2.3090 1.479 0.32 75.184 73.705 72.226 17.46 土3.46 士3.46 土0.216 9.2 26.7 30.2 18.6 76.3 4.2
G3 11 2.3691 1.479 0.32 87.884 86.405 84.926 20.64 士3.46 土3.46 土0.216 9.2 29.9 33.3 21.1 89.1 4.2
テーパおねじ及びテーパめねじに対して適用する基準山形
平行めねじに対して適用する基準山形
テーパおねじとテーパめねじまたは平行めねじとのハメアイ
参考資料REFERENCE
イハラ_高圧管継手_170525.indd 46 2017/06/21 11:56
注意 継手、バルブ、関連するアクセサリーの不適切な選択又は取扱いは、人体やシステムに障害・損傷を与える恐れがあります。システム設計者及びユーザーの責任と権限による判断のもとに、使用されるシステムとの適合性や使用条件を考慮のうえ、継手、バルブ、関連するアクセサリーを選定し、適切な取り付け、操作及びメンテナンスを行って下さい。ご使用にあたり、取扱説明書をお読みいただき内容をよくご理解下さい。取扱説明書がお手元に無い場合及び不明な点はもよりの事業部営業部にお問い合せ下さい。
WARNING If you don’ t select and handle fi ttings, valves and related accessories in an adequate manner, it may damage human beings and applicable systems.Within the responsibility and authorization of users and piping designers, fi ttings, valves and related accessories shall be adequately selected, assembled, used and maintained based on the applicable conditions and product conformity to the system to be applied. Please read carefully our operation manual and feel free to contact with Ihara if you have any question or request.
製品保証期間について 1.保証期間 当社製品の保証期間は、使用開始から1年以内、もしくは納入後1.5年以内、いずれか早期に到達する期間と致します。ただし、製品が
特殊仕様である場合や当社の設計仕様を逸脱した状態で使用された場合は、この限りではありません。また、製品には耐久回数,交換部品などを定めているものがありますので、最寄の当社営業所にて御確認下さい。
2.保証範囲 保証期間中において当社の責による故障や損傷が明らかになった場合は、代替品又は必要な交換品を無償で提供致します。なお、ここでの保証は、当社製品単体の保証を意味するもので、当社製品の故障や損傷により誘発される損害は、保証の対象範囲から除外させていただきます。
Product Warranty1.Warranty Period The warranty period of our products is one (1) year from putting into service or one and half (1.5) years after delivery
whichever comes earlier.However, the products of special specifi cation and/or the cases used under deviating from the specifi cation shall be exempted.Please inquire us for the products that specify the service life or replacing parts.
2.Scope of Warranty Any failure and damage under maker's responsibility will be found during the warranty period, the substitute and/orreplacement parts shall be provided free of charge. The warranty shall not be extended to a claim for the liquidated damages.
■URL:http://www.ihara-sc.co.jp■本カタログの記載内容は、商品の改良等のため予告なく変更することがありますので、予めご了承下さい■ The contents of this catalog are subject to change without notice due to improvement of products or other reasons.
・東日本営業所/ 〒108-0074 東京都港区高輪3丁目11番3号 イハラ高輪ビルTEL 03-6721-6981(代) FAX 03-6721-6991
・中部営業所/ 〒460-0012 名古屋市中区千代田3丁目14番19号(千代田ツカサビル)TEL 052-323-2627(代) FAX 052-323-2630
・西日本営業所/ 〒530-0044 大阪市北区東天満2丁目6番5号(I・S南森町ビル)TEL 06-6358-9255(代) FAX 06-6358-9260
海外販売拠点 台湾:台中 中国:上海 韓国:ソウルタイ:バンコク米国:カリフォルニア
ISO9001, ISO14001 Certified OfficeCertified office for high-pressure gas facility testing and manufacturing,certified office for N valves and N-II fittings