GROUP A

“PROFESSIONAL” OFFSET MOWERS

Floating(Lift float of theflail head withnitrogenaccumulator)

Wear blade2 screwed rows ofcounter-blades

Inner lining

Pto shaft with overrun clutch

Mechanicalbreakaway

cm 60 offset

Rear adjustableroller with

screwed edges

TLP160A Front version for tractors

with front mounting

HP Tractor70 80 90 100 110 120

Min. tractor weightKg

Min. tractor widthm

TLP160 2400 1,80TLP200 2600 2,00TLP250 2800 2,20

Working positions (m)

166 cm

120 cm

90°

70°

TLP 200 TLP 250TLP 1602,993,59B

2,63A mTLP 160 TLP 250

3,533,23m 4,13

TLP 200

BA 60

cm

Lift float

Hydraulic offset

Elastic Joint betweengearbox and rotor

Mechanical breakaway

FERRI srl - Via Govoni, 30 - 44034 Tamara (FE) Italy - Tel. +39 0532 866866 - Fax +39 0532 866851 - info@ferrisrl.it - www.ferrisrl.itSpare parts: Tel: +39 0532 866993 - Fax: +39 0532 867061 - e-mail: parts@ferrisrl.itAfter sales service: Tel: +39 0532 866991 - Fax: +39 0532 866851 - e-mail: service@ferrisrl.it

Equipped with:

IT IS RECOMMENDED that the connection between tractor and shredder and its setting up should be made with the Dealer according the instructionsand warnings listed on our Use and Maintenance Manual. For further information please contact our after sales service.

* Reach measured from tractor centre line to head edge** Multiple belt

Technical dataModel Cutting

widthMin-Maxsidesliding*

Flail head angle Weight Pto Belts Blade tipspeed

m m degrees Kg Rpm n° m/sec

TLP160 1,61 2,63-3,23 70° 90° 1000 540 5 50TLP160A 1,61 2,63-3,23 70° 90° 1000 1000 5 50TLP200 1,97 2,99-3,59 70° 90° 1120 540 5 50TLP250 2,51 3,53-4,13 70° 90° 1340 1000 1** 45

MachinesModel Flails

TLP160

A 48 hedge trimming flails B 32 multiuse “Y” blades C 16 forged hammer-blades

TLP200

A 60 hedge trimming flails B 40 multiuse “Y” blades C 20 forged hammer-blades

TLP250

A 78 hedge trimming flails B 52 multiuse “Y” blades C 26 forged hammer-blades

Machines with side-shift linkage for tractors with front mountingModel Flails

TLP160A

A 48 hedge trimming flails B 32 multiuse “Y” blades C 16 Forged hammer-blades

Accessories

Kit distributor with floating (cod. ZL1605)

Flails

Specific rotor Interchangeable on the same rotor

Articulated hedge trimming blades for:grass, bushes

Ø max 1 cm

Multiuse “Y” blades for:grass, bushes, shrubs

Ø max 4 cm

Forged hammer-blades for:twigs, grass

Ø max 4 cm

Cod. 0901139 Cod. 0901176 Cod. 0901175

� Lift float of the flail head with nitrogen accumulator

� Hydraulic offset through a parallelogram system (cm 60 offset)

�Mechanical breakaway

� Elastic Joint between gearbox and rotor

� Reinforced frame

� Adjustable flow restrictor for flail head drop

� Rear adjustable roller with screwed edges

� Adjustable and wearproof side skids

� Double wear blades

� Adjustable cutting height

� Pto shaft with overrun clutch

Suitable for tractors equipped with 2 distributors provided with 2 double acting sections, one of which with floating. In case the tractor has only one acting, it will be necessary to fit the kit distributor with floating (see option.)A B C

Warning