Post on 15-Sep-2020
The HSG-OE is a thermal groove-cutter for the
professional and the DIYer.
It cuts profile grooves in Styrofoam, EPS, Tempex, Polystyrene &
Rigid Polyurethane foam boards in a very simple manner,
intented for cables, pipes, hoses etc.
HSGM HSG-OE
Heat up time 6-8 sec
Intermittent
operation:
12sec on/48sec off
Supply Voltage:
230V-50Hz
Power input: 90Watt
Supply cord 6mtr
with EU-plug
Easy replacement
of blades
Eliminates
styrofoam dust
No electrostatic
charging
Weight 1300 gram
(excl. blade)
Blade not included!
The HSG-OE comes
incl.
Suspension hook
Manual
The following blades are sold separately and fit the
HSGM HSG-OE
see specifications below
HSGM HSG-OE Item No. nr: 25.1.100
Item. No: 25.2.133
Item. No: 25.2.121
Item. No: 25.2.122
Blade N-1 14, curved shaped for Ø14mm grooves,
with depth guide (adjustable)
Blade N-1 20, curved shaped for Ø20mm grooves,
with depth guide (adjustable)
Blade N-1 27, curved shaped for Ø27mm grooves,
with depth guide (adjustable)
2
HSGM Heat-cutters for Styrofoam - Polystyrene - EPS - Tempex - Styropor
Blade N-1 16, curved shaped for Ø16mm grooves,
with depth guide (adjustable) Item. No: 25.2.120
The following blades are sold separately and fit the
HSGM HSG-OE
see specifications below
Item. No: 25.2.132
Item. No: 25.2.150
Item. No: 25.2.151
Blade N-2 B-30, angular shaped, for 30mm width
grooves, with depth guide (adjustable)
Item. No: 25.2.131 Blade N-2 B-25, angular shaped, for 25mm width
grooves, with depth guide (adjustable)
Item. No: 25.2.130 Blade N-2 B-20, angular shaped, for 20mm width
grooves, with depth guide (adjustable)
Item. No: 25.2.152
Blade A, for bossed grooves with depth guide.
See picture for measurements in mm.
Blade B, for bossed grooves with depth guide.
See picture for measurements in mm.
Blade C, for bossed grooves with depth guide.
See picture for measurements in mm.
3
HSGM Heat-cutters for Styrofoam - Polystyrene - EPS - Tempex - Styropor
Item. No: 25.2.129 Blade N-2 B-16, angular shaped, for 16mm width
grooves, with depth guide (adjustable)
Item. No: 25.2.123 Blase N-1 34, curved shaped for Ø34mm grooves,
with depth guide (adjustable)
The ENGEL-CUTTER is a robust universal thermal cutter for the
professional & the DIYer.
The ENGEL-CUTTER easily cuts through Styrofoam,
EPS, Tempex, Polystyrene & Rigid Polyurethane foam boards
up to 100mm thickness.
It can also power an assortment of special shaped blades
to cut out profile-grooves.
ENGEL-CUTTER
Heat up time 10sec
Intermittent
operation:
12sec on/48sec off
Supply Voltage:
230V-50Hz
Power input:
100Watt
Blade temperature:
max. 500ºC (930ºF)
Supply cord 3mtr
with EU-plug
Easy replacement
of blades
Eliminates
styrofoam dust
No electrostatic
charging
Weight 1025 gram
(incl. blade)
The ENGEL-CUTTER
comes incl.
1 x C-70 blade for
boards up to 70mm
thickness
1 Suspension hook
Manual
The following blades & adapters are sold separately and fit the
HSGM ENGEL-CUTTER
see specifications below
HSGM ENGEL-CUTTER Item. No: 25.1.010
Item. No: 25.2.010
Item. No: 25.2.020
Item. No: 25.2.050
Item. No: 25.2.060
Item. No: 25.2.070
Item. No: 25.2.090
Item. No: 25.2.080
Item. No: 25.2.100
Blade C-70, for board thicknesses up to 70mm
Blade C-100, for board thicknesses up to 100mm
Blade CN-14, curved for 14mm grooves
Blade CN-20, curved for 20mm grooves
Blade CN-26, curved for 26mm grooves
Blade CR-20, curved for 20mm grooves,
with depth guide
Blade CS-20, angular shaped for 20mm grooves,
with depth guide
Blade CV-20, V-shaped for 20mm grooves,
with depth guide
4
HSGM Heat-cutters for Styrofoam - Polystyrene - EPS - Tempex - Styropor
Item. No: 25.2.295
H-A-CUTTER, this adapter cut grooves in all
shapes with the utmost precision up to 80mm
width.
Width guide included.
(ENGEL-CUTTER not included)
(blade not included)
Item. No: 25.2.301 Blade HLL 5x1,0mm, length 1meter,
bendable in any desired shape.
Item. No: 25.2.303
Blade is sharpened on both sides
5
HSGM Heat-cutters for Styrofoam - Polystyrene - EPS - Tempex - Styropor
Blade HLL 4x0,5mm, length 1meter,
bendable in any desired shape.
The HSGM STYROCUT 140 is a powerful thermal cutter for professionals.
The STYROCUT 140 cuts easily through Styrofoam,
EPS, Tempex, Polystyrene & Rigid Polyurethane foam boards
up to 160 millimeter thickness.
It can also power an assortment of special shaped blades
to cut out profile-grooves.
STYROCUT 140
Heat up time 10sec
Intermittent
operation:
12sec on/48sec off
Supply Voltage:
230V-50Hz
Power input:
110Watt
Blade temperature:
max. 500ºC (930ºF)
Supply cord 3mtr
with EU-plug
Easy replacement
of blades
Eliminates
styrofoam dust
No electrostatic
charging
Weight 1025 gram
De STYROCUT 140
comes incl.
1 x C-140 blade for
boards up to 140mm
thickness
1 Suspension hook
Manual
The following blades are sold separately and fit the
STYROCUT 140.
see specifications below
Item. No: 25.2.030
Item. No: 25.2.020
Item. No: 25.2.050
Item. No: 25.2.060
Item. No: 25.2.070
Item. No: 25.2.090
Blade C-140,for board thicknesses up to 140mm
Blade C-100,for board thicknesses up to 100mm
Blade CN-14, curved for 14mm grooves
Blade CN-20, curved for 20mm grooves
Blade CN-26, curved for 26mm grooves
Blade CR-20, curved for 20mm grooves,
with depth guide
Blade C-160,for board thicknesses up to 160mm
Item. No: 25.2.080
Item. No: 25.2.031
Blade CS-20, angular shaped for 20mm
grooves, with depth guide
6
HSGM Heat-cutters for Styrofoam - Polystyrene - EPS - Tempex - Styropor
STYROCUT 140 Item. No: 25.1.040
The following blades are sold separately and fit the
STYROCUT 140.
see specifications below
Item No: 25.2.049
Blade D68-61, this blade makes it possible to
cut a hole with a diameter of 68mm & a depth
of 61mm (adjustable), so you can install a
cavity wall mounting box.
On request, we can manufacture this blade in
various sizes!
7
HSGM Heat-cutters for Styrofoam - Polystyrene - EPS - Tempex - Styropor
The STYROCUT 180 Electronic is a comfortable, very light thermal cutter
for professionals, the craftsman and the DIYer.
The STYROCUT 180 Electronic cuts easily through Styrofoam,
EPS, Tempex, Polystyrene & Rigid Polyurethane foam boards
boards up to 200 millimeter thickness,
and it is also very suitable for cutting special profile-grooves
in a very simple manner.
STYROCUT 180
Electronic
Heat up time 6sec
Intermittent
operation:
12sec on/48sec off
Supply Voltage:
230V-50Hz
Power input:
200Watt
Blade temperature:
max. 500ºC (930ºF)
Supply cord 3mtr
with EU-plug
Easy replacement
of blades
Eliminates
styrofoam dust
No electrostatic
charging
Weight 450 gram
(incl. blade),
very light !!!
The STYROCUT 180
Electronic
comes incl.
1 x C-180 blade for
boards up to 180mm
thickness
1 Suspension hook
Manual
1 Plastic tool case
The following blades are sold separately and fit the
STYROCUT 180 Electronic
see specifications below
HSGM STYROCUT 180 electronic Item. No: 25.1.060
Item. No: 25.2.020
Item. No: 25.2.030
Item. No: 25.2.031
Item. No: 25.2.040
Item. No: 25.2.110
Item. No: 25.2.050
Item. No: 25.2.060
Blade C-100, for board thicknesses up to 100mm
Blade C-140, for board thicknesses up to 140mm
Blade C-160, for board thicknesses up to 160mm
Blade C-180, for board thicknesses up to 180mm
Blade C-200, for board thicknesses up to 200mm
Blade CN-14, curved for 14mm grooves
Blade CN-20, curved voor 20mm grooves
8
HSGM Heat-cutters for Styrofoam - Polystyrene - EPS - Tempex - Styropor
The following blades are sold separately and fit the
STYROCUT 180 Electronic
see specifications below
Item. No: 25.2.070
Item. No: 25.2.090
Item. No: 25.2.080
Blade CN-26, curved for 26mm grooves
Blade CR-20, curved for 20mm grooves,
with depth guide
Blade CS-20, angular shaped for 20mm grooves,
with depth guide
Item. No: 25.2.049
Blade D68-61, this blade makes it possible to
cut a hole with a diameter of 68mm & a depth
of 61mm (adjustable), so you can install a
cavity wall mounting box.
On request, we can manufacture this blade in
various sizes!
9
HSGM Heat-cutters for Styrofoam - Polystyrene - EPS - Tempex - Styropor
The STYROCUT 230 is a comfortable, very light thermal cutter with
electronic powercontrol for an optimal adjustment of the
blade temperature.
For professionals, construction workers, the industry, craftsmen and
designers.
The STYROCUT 230 cuts easily through Styrofoam,
EPS, Tempex, Polystyrene & Rigid Polyurethane foam boards
up to 230 millimeter thickness,
and it is also very suitable for cutting special profile grooves in a
very simple manner.
STYROCUT 230
Heat up time 10sec
Intermittent
operation:
12sec on/48sec off
Supply Voltage:
230V-50Hz
Power input:
230Watt
Blade temperature:
max. 500ºC (930ºF)
Supply cord 3mtr
with EU-plug
Easy replacement
of blades
Eliminates
styrofoam dust
No electrostatic
charging
Weight 600 gram
(incl. blade)
De STYROCUT 230
comes incl.
1 x DSS-220 blade
for boards up to
200mm thickness
1 x DSS-250 blade
for boards up to
230mm thickness
1 Brass brush
1 Screwdriver
Manual
1 Plastic tool case
The following blades are sold separately and fit the
STYROCUT 230
See specifications below
STYROCUT 230 Item No: 25.1.070
Item No: 25.2.118
Item No: 25.2.119
Item No: 25.2.149
Item No: 25.2.020
Item No: 25.2.030
Item No: 25.2.031
Blade DSS-200, for board thicknesses up to
180mm
Blade DSS-220, for board thicknesses up to
200mm
Blade DSS-250, for board thicknesses up to
230mm
Blade C-100, for board thicknesses up to 100mm
Blade C-140, for board thicknesses up to 140mm
Blade C-160, for board thicknesses up to 160mm
10
Item No: 25.2.040 Blade C-180, for board thicknesses up to 180mm
HSGM Heat-cutters for Styrofoam - Polystyrene - EPS - Tempex - Styropor
The following blades are sold separately and fit the
STYROCUT 230
see specifications below
Item No: 25.2.070
Item No: 25.2.090
Item No: 25.2.080
Blade CN-26, curved for 26mm grooves
Blade CR-20, curved for 20mm grooves,
with depth guide
Blade CS-20, angular shaped for 20mm grooves,
with depth guide
Item No: 25.2.060 Blade CN-20, curved for 20mm grooves
Item No: 25.2.049
Blade D68-61, this blade makes it possible to
cut a hole with a diameter of 68mm & a depth
of 61mm (adjustable), so you can install a
cavity wall mounting box.
On request, we can manufacture this blade in
various sizes!
Item No: 25.2.050 Blade CN-14, curved for 14mm grooves
Item No: 25.2.110 Blade C-200, for board thicknesses up to
200mm
Item No: 25.2.117 Blade C-230, for board thicknesses up to
230mm
11
Item No: 25.2.150
Item No: 25.2.151
Item No: 25.2.152
Blade A for Bossed grooves, with depth guide.
See picture for measurements in mm.
Blade B for Bossed grooves, with depth guide.
See picture for measurements in mm.
Blade C for Bossed grooves, with depth guide.
See picture for measurements in mm.
HSGM Heat-cutters for Styrofoam - Polystyrene - EPS - Tempex - Styropor
Profile Section-adapter, suitable to cut individual grooves
into styrofoam.
As an accessory to the device type HSGM STYRO-CUT 230 (* Heat cutter type HSGM STYRO-CUT 230 not included)
Cuts grooves from 20 up to 150mm (adjustable)
Item No: 25.2.300
Profile Section-adapter, cuts grooves from
20 up to 150mm (adjustable)
(*the heat cutter and blade are not included!)
Item No: 25.2.301 Blade HLL 5x1,0mm - length 1 meter, bendable in
any desired shape.
12
HSGM Heat-cutters for Styrofoam - Polystyrene - EPS - Tempex - Styropor
Item No: 25.2.303 Blade HLL 4x0,5mm - length 1 meter, bendable in
any desired shape.
The HSGM STYROCUT G1-VW is a powerful professional thermal cutter
for “continuous operation” with electronic powercontrol for an
optimal adjustment of the blade temperature.
Developed for Professionals, The Construction Industry, Craftsmen etc.
The HSGM STYROCUT G1-VW cuts easily through Styrofoam,
EPS, Tempex, Polystyrene & Rigid Polyurethane foam boards
up to 230 millimeter thickness.
It is also very suitable for cutting special profile-grooves in a
very simple manner.
HSGM STYROCUT G1-VW
Heat up time 8sec
Continous operation
(100%)
Blade temperature:
max. 600ºC(1112ºF)
Power input:
400Watt
Supply Voltage:
230V-50Hz
Highly flexible cable,
lenght 2mtr
(option 3mtr. max)
Easy replacement
of blades
Eliminates
styrofoam dust
Weight 6900 gram
(incl. bladeholder M)
The HGSM
STYROCUT
G1-VW
comes incl.
Bladeholder M incl.
cable (2 or 3m)
1 x C-180 blade for
boards up to 180mm
thickness
Manual
The following blades are sold separately and fit the
HSGM STYROCUT G1-VW
See specifications below
HGSM STYROCUT G1-VW Item No: 25.1.020 (incl. 2m cable)
HSGM STYROCUT G1-VW Item No: 25.1.030 (incl. 3m cable)
Item No: 25.2.010
Item No: 25.2.020
Item No: 25.2.030
Item No: 25.2.031
Item No: 25.2.040
Item No: 25.2.110
Item No: 25.2.117
Blade C-70, for board thicknesses up to 70mm
Blade C-100, for board thicknesses up to 100mm
Blade C-140, for board thicknesses up to 140mm
Blade C-160, for board thicknesses up to 160mm
Blade C-180, for board thicknesses up to 180mm
Blade C-200, for board thicknesses up to 200mm
Blade C-230, for board thicknesses up to 230mm
13
HSGM Heat-cutters for Styrofoam - Polystyrene - EPS - Tempex - Styropor
Item No: 25.2.070
Item No: 25.2.090
Item No: 25.2.080
Item No: 25.2.100
Blade CN-26, curved for 26mm grooves
Blade CR-20, curved for 20mm grooves,
with depth guide
Blade CS-20, angular shaped for 20mm grooves,
with depth guide
Blade CV-20, V-shaped for 20mm grooves,
with depth guide
Item No: 25.2.060 Blade CN-20, curved for 20mm grooves
Item No: 25.2.050 Blade CN-14, curved for 14mm grooves
14
HSGM Thermische Styrofoam - Styropor - Polystyreen - Piepschuim Snijders
Item. No: 25.2.133
Item. No: 25.2.121
Item. No: 25.2.122
Blade N-1 14, curved shaped for Ø14mm grooves,
with depth guide (adjustable)
Blade N-1 20, curved shaped for Ø20mm grooves,
with depth guide (adjustable)
Blade N-1 27, curved shaped for Ø27mm grooves,
with depth guide (adjustable)
Blade N-1 16, curved shaped for Ø16mm grooves,
with depth guide (adjustable) Item. No: 25.2.120
Item. No: 25.2.123 Blase N-1 34, curved shaped for Ø34mm grooves,
with depth guide (adjustable)
15
HSGM Thermische Styrofoam - Styropor - Polystyreen - Piepschuim Snijders
The following blades are sold separately and fit the
HSGM STYROCUT G1-VW
see specifications below
Item. No: 25.2.132
Item. No: 25.2.150
Item. No: 25.2.151
Blade N-2 B-30, angular shaped, for 30mm width
grooves, with depth guide (adjustable)
Item. No: 25.2.131 Blade N-2 B-25, angular shaped, for 25mm width
grooves, with depth guide (adjustable)
Item. No: 25.2.130 Blade N-2 B-20, angular shaped, for 20mm width
grooves, with depth guide (adjustable)
Item. No: 25.2.152
Blade A, for bossed grooves with depth guide.
See picture for measurements in mm.
Blade B, for bossed grooves with depth guide.
See picture for measurements in mm.
Blade C, for bossed grooves with depth guide.
See picture for measurements in mm.
Item. No: 25.2.129 Blade N-2 B-16, angular shaped, for 16mm width
grooves, with depth guide (adjustable)
Item No: 25.2.300 Profile Section-adapter, cuts grooves from
20 up to 150mm wideness (adjustable).
(*the blade is not included!)
Item No: 25.2.301 Blade HLL 5x1,0mm - length 1 meter, bendable in
any desired shape
Blade D68-61, this blade makes it possible to
cut a hole with a diameter of 68mm & a depth
of 61mm (adjustable), so you can install a
cavity wall mounting box.
On request, we can manufacture this blade in
various sizes!
Item No: 25.2.049
16
Blade D124x20-50, this blade makes it possible to
cut a hole with a diameter of 124mm & a depth
of ca. 50mm (adjustable)
For PVC pipes etc.
(Custom-made product, deliverytime on request)
Item No: 25.2.048
HSGM Thermische Styrofoam - Styropor - Polystyreen - Piepschuim Snijders
Item No: 25.2.303 Blade HLL 4x0,5mm - length 1 meter, bendable in
any desired shape
The following blades are sold separately and fit the
HSGM STYROCUT G1-VW
see specifications below
HSGM
Important information concerning thermic Styrofoam cutters
The Styrofoam cutters are exclusively for the cutting of polystyrene and hard foam,
low flammable according to DIN 4102-1.
Fumes which may develop during the cutting process must be removed by working
in a room with an extraction fan.
PVC and PVC-layered materials should not be cut with this unit as the resultant fumes
are hazardous to one’s health.
Do not touch the blade while cutting or after the switch has been depressed to avoid
burnings.
Do not lean the manually operated tools against anything if the blades are not
completely cooled.
Always unplug the unit when not in use.
The Machines and tools shown in this catalog are just a small variety of our production.
We mainly manufacture special purpose machines but also supply components and
single parts to modify existing or newly purchased machines.
On request we manufacture specially constructed machinery, units and blades:
We also produce:
Rope & Sail Cutters
Textile Cutters
Rope and belt cutting machines
Machines cutting fabric in width
Machines cutting fabric in length
Thermal shape-cutting installations
Specialized units, devices and machines
Custom-made blades
HSGM Thermic Styrofoam Cutters
Worldwide Distributor of
HSGM & ENGEL
A. Hofmanweg 55
2031 BH Haarlem The Netherlands
Phone: +31(0)233030124
WhatsApp: +31(0)624558408
info@cwtnl.com
Visit our website
www.connectorworldtrade.com
www.hsgm.org