Post on 12-Feb-2020
www.general.ca
“SUPER TURBO”
22000088--0099##665500RR--TT5500 MM22MM
##335500RR--TT5500 MM22MM
AB
##7755--555500 MM11
##2255--330000 MM11
NNeeww
RADIAL ARM DRILL PRESS WITH REG. 5/8” CHUCKTilting head up to 30° left or right. / Tableswivels 360°& tilts 45° left and right. / See-through chuck guard included. / 9 speeds(295, 440, 585, 800, 870,1000, 2100, 2680 & 3580 RPM). / Powerful 1/2 HP motor.
Made inCanada
QU
ALITY
APPROVED
C H E C
K
PPRROOMMOOTTIIOONN FFOOLLDDEERRSSFFaallll // WWiinntteerr
3 POSITIONPIVOTING HEAD
14” x 30”WOOD LATHE
Model 15-232
$189.00Reg. $245.00
FLEXIBLE, EXPANDIBLE 2- WAY ROLLER STANDAdjustable height from 24 1/4” to 37”. / 9 nickel-plated 2 1/4” x 20” 2-way rollers. / 51 1/2” maximum expanded length. / Load capacity of 300 LBS per set.
Item 50-167S
$289.00Reg. $375.00
UNIVERSAL MOBILE BASEHeavy-duty steel. / Strong 3” wheels. Rubberlevelling feet (2). / Adjustment in 1” increments./ 500 LBS capacity.
Item 50-025
$69.00Reg. $95.00
BELT SANDER/GRINDERDouble-sealed ball-bearing construction. / Adjustable aluminum tool-rest. / 3450 RPMgrinding speed. / 4900 FPM belt speed. /Powerful 1/3 HP motor.
22” X 18 1/2” PORTABLE DOWN DRAFT TABLE4” dust port. / Internal baffles for stable maxi-mum capacity airflow. / Includes 6 adjustablestops. / Sturdy steel frame and lightweightdesign.
Item 10-710
$99.00Reg. $195.00
AIR CLEANING SYSTEM700, 900, 1250 CFM (air flow). / Superior 2 stagefiltration system. / 5 pre-programmed timer settings. (2, 4, 6, 8 & continuous). / Powerful1/3 HP motor.
Model 10-600
$499.00Reg. $625.00
Item 10-824 (18” x 24”)
$189.00Reg. $225.00$
Item 10-929 (29” x 29”)
$249.00Reg. $320.00
Distributed by
Prices are in effect fromOctober 1st, 2008 to February 28th, 2009WE RESERVE THE RIGHT TO CORRECT ANYTYPOGRAPHICAL AND PICTORIAL ERRORS WITHOUT NOTICE.
PNEUMATIC MOBILE BASEMove heavy objects on a cushion of air. / Requires standard compressed air and asmooth hard floor. / Can be cut to fit almostany size exactly. / Safer than wheels - no tipping and zero rollback.
EDGE BANDERElectronically controlled heat element variableheat from 100 to 200° C. / Accommodates awide range of edge banding material up to 2”thick.
26 3/4” x 7 1/2” laminate covered tablesupports large workpieces.
Item 45-100
$379.00Reg. $460.00
$2999.00Reg. $4100.00
Digital inverterelectronic variable speed
$1999.00Reg. $2500.00
INCLUDES ONE110 V - 15 AMPSOCKET
• Heavy-duty cast-iron bed for stability and minimal vibration.• Headstock pivots 360° with positive stops at 45°, 90°, 135° & 180°.• Electronic inverter for 2 variable speed ranges: 65 to 1600 RPM & 150 to 3750 RPM. • Powerful 1 HP motor.
GENERAL “T” FENCE SYSTEM
Made in Canada
• 2 matching V-belts.• “T” fence system with 50” rails.• Magnetic safety switch.• 36” extension table with ad-justable steel support legs.• Arbor mounted on heavy-duty, permanently lubricated, sealed ball-bearings.• Powerful 3 HP motor.
(right tilt)
(( lleefftt tt ii lltt))
Quick release combination
riving style splitter and blade
guard with anti-kickback pawls
( A ) & a second European style
riving knife ( B ) also included.
10” TILTING ARBOR SAW
$599.00Reg. $750.00
PRINTED IN CANADA
www.general.ca2
# 50-EB3
# 50-EXBC
# 75-050T M1& #75-075 M1
##EEXX--2211
##EEXX--3300
##5500--222200RREEXX
MM11 ++ SSLLTT
##5500--SSLLTT4400
MORTISERS
5/8” HOLLOW CHISELMORTISERFeatures a tilting head (30° left &right) with a 180° swivel. / Heavy-duty cast-iron construction. Includessleeves for both 5/8” and 3/4” chisel shanks. / 1/4”, 5/16”, 3/8”, &1/2” chisel & bit sets included. / Powerful 1/2 HP motor.
Adaptable on most 10” to 14” table saws and most shapers.
TTaabbllee SSaa
wwss &&
EExxccaalliibbuurr PPrroodduuccttss
$949.00Reg. $1150.00
Item 50-SLT60
$1149.00Reg. $1350.00
Unique design mounting bracket: pivots arm away or remove completely in seconds
SLIDING TABLEEasy to adjust, extruded aluminum miterfence for accurate miters from 0º to 50º formodel 50-SLT40 & 0° to 45° for model 50-SLT60. / Cut up to 49”* with the cross-cut fence positioned at the rear of the table.Crosscut and miter up to 28”* with thefence at the front of table (# 50-SLT40)./Cut up to 62”* with the crosscut fence po-sitioned at the rear of the table. Crosscutand miter up to 36”* with the fence at thefront of table (#50-SLT60).*Depending on the positioning of the mainmounting bracket on your saw.
“OSBORNE”MITER GAUGESolid triangular design for tight miter joints. / Sliding flip-up stop. / Easyto read index graduations. / Patentedextension arm assembly makes it quick& easy to find any angle and lock it securely in place.
OVERARM BLADECOVER SYSTEMWITH DUST COLLECTION CAPABILITY
4” main boom and 3”inner boom. / Flexi-ble 3” hose connectsthe blade cover tothe boom.
Item 50-EXBC10 (10”)FITS ON MOST10” SAW
$389.00Reg. $550.00
Item 50-EXBC14 (14”)FITS ON MOST12” & 14” SAW
$489.00Reg. $600.00
Item 50-EB3
$129.00Reg. $165.00
10” TILTING ARBOR SAW WITH
EXCALIBUR SLIDING TABLE
Complete table saw and sliding tabl
e package includes 2 HP left
tilt model 50-220R saw with new Ex
calibur T-fence and Excalibur
sliding table system in place of the l
eft side table extension wing.
Specify 50-220REXM1 + SLT40 or 5
0-220REXM1 + SLT60 when
ordering to choose your sliding tabl
e.
# 50-220REXM1 + SLT60
$2529.00Reg. $3100.00
# 50-220REXM1+ SLT40
$2339.00Reg. $2900.00
HHeeaadd ttiittllss 4455 lleefftt && rriigghhttoo
21” SCROLL SAWHead tilts 45° left and right,tilting the blade, not the tablekeeping the workpiece level. /21” throat capacity & 2”cutting thickness capacity. /Variable speed of 400 to1550 STROKES/MIN.
$749.00Reg. $949.00
30” SCROLL SAWHead tilts 45° left and right, tilting the blade, not the table keeping the workpiecelevel. / 30” throat capacity &
2” cutting thickness capacity. /Variable speed of 400 to 1550 STROKES/MIN.
$929.00Reg. $1299.00
MODEL 75-050T M1
$539.00Reg. $650.00
INCLUDED
1” HOLLOW CHISELMORTISERHeavy-duty cast-iron construc-tion. / 1/4”, 3/8”, 1/2”, & 3/4”chisel & bit sets included. /Lateral and longitudinal table movement. / Tilting head and swivel fence. / Powerful 1 HP motor.
MODEL 75-075 M1
$1149.00Reg. $1590.00
INCLUDED
www.general.ca 3
##5500--556600 MM11
##VV--115544--MM22
Right Tilt
$9499.00Reg. $11 750.00
10” SCORING SAW- WITH BUILT-IN SLIDING TABLE
Anodized European style sliding
table. / Separate safety lock out
switch for scoring motor – can be
turned off when cutting solid wood. /
Solid cast-iron table with anodized
aluminum coating. / Heavy-duty
cabinet mounted cast-iron
trunnions. / Precision built rip fence
system with 50” guide rails for
maximum rip capacity. / Powerful
3 HP motor.
THREE SAWS IN ONE! COMPACT & VER-SATILE DESIGN. CAN BE USED AS A REG-ULAR SAW, BUT INCLUDES A BUILT INSLIDING TABLE FOR STABLE EFFORT-LESS CROSSCUTS & A SEPARATE SCOR-ING BLADE FOR CHIP FREE CUTS INMELAMINE & LAMINATES.
SSeeee--tthhrroouugghh bbllaaddee gguuaarrdd wwiitthh
sspplliitttteerr && aannttii--kkiicckkbbaacckk ppaawwllss
Model 50-175L M1 / 50-185L M1
$1049.00Reg. $1460.00
10” DELUXE BUILDER’S TABLE SAW- Right Tilt (50-175/175L)- Left Tilt (50-185/185L)
nnoott sshhoowwnnModel 50-220RCL M1
$1629.00Reg. $2050.00
UNIQUE DIGITAL DISPLAYFOR BLADE ANGLE
10” TILTING ARBOR SAW- Left Tilt
• New! Combination riving style splitter and blade guard with anti-kickback pawls and a second European style riving knife also included.
• # F36T28 GENERAL T-fence system(50-220RC M1).• # F36T52 GENERAL T-fence system (50-220RCL M1)
• 44” x 27” cast-iron table withextension wings.• Solid one-piece yoke.• Large stop switch.• Dual direct dust collection includes built-in
blade shroud connected to a standard 4” dust outlet.• Powerful 2 HP motor.
GENERAL “T” FENCE SYSTEMMade in Canada
Made inCanada
14” RADIAL ARM SAWHigh-quality steel base. / Positive stopat 0°, 45° and 90° for tilt & pivot. / Rodand blade protectors with anti-kickbackfingers. / Powerful 3 1/2 HP motor.
HEAVY-DUTY MOBILE BASE FOR TABLESAWS WITH EXTENSION TABLE & LEGSHeavy-duty steel. Strong 4” wheels. / 900 LBScapacity.
TENONING JIG FOR TABLE SAW
Perfect fit on right or left tilt ta
ble saws. / Heavy-
duty cast-iron construction. / L
arge handles for
better operator control.
10” TILTING ARBOR SAW- Left Tilt3 matching V-belts. / Hi-precision professional quality rip fence system#F42T50. / Magnetic safety switch. /Powerful 3 HP motor.
SAW (#50-260) & MELAMINEEXTENSION TABLE WITH LEGS INCLUDED
GENERAL “T” FENCE SYSTEMMade in Canada
Model 50-220RC M1
$1579.00Reg. $1990.00
Deluxe precision rip fence system # F36T28(50-175 M1 / 50-185 M1). / Deluxe precision rip fence system # F36T52 (50-175L M1 / 50-185L M1). / Heavy-duty, precisioncast-iron, ribbed table with miter gauge “T” slot. / Solid cast-iron extension wings (2). / See-through blade guardwith splitter and anti-kickback fingers. / Powerful 2 HPmotor.
GENERAL “T” FENCE SYSTEMMade in Canada
Model 50-175 M1 / 50-185 M1
$999.00Reg. $1400.00
Model 50-260K M1
$1999.00Reg. $2850.00
Model 50-260 M1
$1899.00Reg. $2750.00
$5329.00Reg. $6850.00
Item 50-030
$178.00Reg. $225.00
Item 50-050
$139.00Reg. $196.00
OUTRIGGER SLIDER SUPPORTITEM 50-565$484.00Reg. $625.00
www.general.ca4
##9900--112255 MM11##9900--115500 MM11
##9900--220000 MM
11
##9900--224400 MM11
##9900--332200 MM11##669900--11-- MM22
Electronic variable speed
digital inverter
NNeeww93 1/2” X 3/8” & 105” X 3/8” bladesincluded
15” ADJUSTABLE HEIGHTWOOD CUTTING BANDSAWCast-iron frame & precision-balanced cast-iron wheels with replaceable rubber tires. / Aluminum rip fence included. / 2 blade speeds (1570 & 2660FPM). / Table tilting 0 - 45° byhand wheel. / Adjustable cuttingdepth 5"-12". / Powerful 1 1/2 HP motor.
Ba n d s aws
$879.00Reg. $995.00
17” WOOD / METAL BANDSAW
Dynamically balanced
cast-iron
wheels. / Solid, high q
uality,
precision-machined, rib
bed
cast-iron table with 10°
left and 45°
right tilting action. / 2 b
uilt-in 4”
diameter dust chutes. /
Laser line
marker and worklight in
cluded. /
Blade speed - wood: 5
40 to
3600 FPM, metal: 100
to 650 FPM.
/ Powerful 2 HP motor.
$2949.00Reg. $3625.00
POWER FEEDERFully adjustable - fits on a variety of machines. / Variable speeds 6.5 to 40 FPM in forward or reverse. / Powerful1/8 HP motor.
MODEL 20-100 M1
$329.00Reg. $460.00
POWER FEEDER3 rollers. / 4 speeds; 20, 26, 33 & 43 FPM. /Powerful 1/4 HP motor.
MODEL 20-200 M1
$579.00Reg. $760.00
POWER FEEDER
3 rollers. / 4 speeds; 9.5,
15, 25, 38 FPM. /
Powerful 1/2 HP motor.
MODEL 20-220 M1
$849.00Reg. $1100.00
14” WOOD CUTTINGBANDSAWCast-iron frame & precision-balanced aluminum wheelswith replaceable rubber tires./ Rip fence & miter gauge included. / 2 speeds (1800 & 3000 LIN.FPM). / Blowerdevice. / Powerful 1 HP motor.
3/8” blade included
OPTIONAL RISERATTACHMENT KITITEM 90-130
$79.00Reg. $100.00
14” WOOD CUTTINGBANDSAW
Built-in dust collection system. / Laser linemarker & work light included. / Precision
aluminum miter gauge./ 8” super cutting capacity. / 2 bladespeeds - 2315 &
2959 FPM. / Powerful1 HP motor.
$999.00Reg. $1370.00
3/8” blade included
$1459.00Reg. $1900.00
17” WOOD CUTTINGBANDSAWSolid, high quality, preci-sion-machined, ribbedcast-iron table. / Laser linemarker. / 2 blade speeds -1560 & 3190 FPM. / Wideblade selection (1/8” to 1”)./ Powerful 2 HP industrialmotor.
MODEL 90-240 M1
$1789.00Reg. $2200.00
1/2” blade included
Made inCanada
15” WOOD CUTTING BANDSAWCast-iron frame. / Dynamical balancedheavy cast-iron wheels./ Very silent, vibrationfree operation. / Graduated indicator forblade tension. / Powerful 1 1/2 HP industrial motor.
$3599.00Reg. $4350.00
12” resaw capacity
Made inCanada
AVAILABLE: 15” METAL CUTTING BANDSAWSame features asmodel 490-1-M1. / 8blade speeds (40 to3250 Lin. FPM). /Heavy-duty cast-irongearbox.
MODEL 590-1-M1$4299.00Reg. $5700.00
3/8” bladeincluded
MODEL 490-1-M1
$3199.00Reg. $4200.00
15” WOOD CUTTINGBANDSAWOne-piece molded cast-iron frame. / Dynamically balancedheavy cast-iron wheels. / Graduated indicator forblade tension. / Powerful 1 HP motor.
5www.general.ca
* #10-310
* #10-314
* #10-323
#10300-35B
#10300-11B
* #10-332
* #10-334
* #10-306
* #10-309
##1100--330000 MM11
IInncclluuddeeddaacccceessssoorriieess
• High quality ribbed cast-iron headstock, tailstock, and bed.• 24 1/2” swing over gap capacity.• 4 variable speeds(0 to 3000 RPM).
• Quick releasespeed changinglever.• 38” distance betweencenters.• Magnetic safety switch.• Powerful 2 HP motor.
20” WOOD LATHE 22” BED EXTENSION(#25-130) INCLUDED
“MAXI-LATHE” WOOD LATHEQuick lock control levers easily position tool-rest. /Maximum turning capacity of 15” between centers. /6 speeds: 480, 1270, 1960, 2730, 3327 & 4023RPM. / Powerful 1/2 HP motor.
MODEL 25-100 M1
$499.00Reg. $810.00 (with #25-130)
FITSMOST 12”
- 22” FLOOR
MODEL LATHES
WITH CAST
BEDWAYS
VARIABLE SPEED MAXI-LATHE VS+Quick lock control levers easily position tool-rest. / Maximum distanceof 17 5/16” between centers. / 3 variable speed ranges: 300 to 900, 600 to 1800 & 1200 to 3600 RPM. / Powerful 3/4 HP motor.
MODEL 25-200 M1
$745.00Reg. $900.00
4” - 4 JAW SCROLL
CHUCK
ITEM 25-105 (1” -8
):
For 25-100, 25-200
, 160
&16018. / ITEM 25
-605
(1 1/4” - 8): For 25-
600,
25-650, 260 & 260
20.ITEM 25-105 (1” -8)
ITEM 25-605 (1 1/4” -8)
$99.00Reg. $11
9.00
WOOD LATHE
DUPLICATOR
Creates perfectly m
atched
spindles with ease
. / Extruded
aluminum base an
d carriage.
Smooth hand whee
l controlled
rack & pinion syst
em. / High
speed steel cutter.
ITEM 25-036
$469.00Reg. $57
0.00
18” WOOD LATHE• High quality ribbed cast-iron headstock, tailstock, and bed.• 21” swing over gap capacity.• 500 to 3000 RPM variable speed. • 38” distance between centers. • Powerful 1 HP motor.
MODEL 16018-2-M1
$3399.00Reg. $3950.00
Variable speedMade inCanada
20” WOOD LATHE• High quality ribbed cast-iron headstock,tailstock, and bed.• 24 1/2” swing overgap capacity.• 375 to 3300 RPMvariable speed.• 38” distance between centers.• Magnetic safety switch.• Powerful 2 HP motor.
MODEL 26020-1-M2
$4999.00Reg. $6390.00
Variable reversible speed
Made inCanada
16” X 42” WOOD LATHEHeavy-duty cast-iron bed for minimal vibration. / Headstockswivels 360° with 45° and 90°positive stops. / Electronic inverter for variable speed adjustment (0 to 3750 RPM). /Powerful 1 1/2 HP motor.
MODEL 25-650 M1
$2129.00Reg. $2675.00
Electronic variable speed & pivoting head
MODEL 26020VDR-M2
$5099.00Reg. $6650.00
Made inCanada
4 Variable / Reversible speedswith electronic control
MMaaddee iinn CCaannaaddaa
*ALSO SOLD S
EPARATELY
WET/DRY VACUUMCLEANER10 gallon capacity. / 2 speed 1 1/2 HP motor./ Rated for heavy-dutymaintenance & jani-torial use. / 2 stage air filtration.
$319.00Reg. $379.00
Stainlesssteel tank
6
##3300--111155 MM11
##3300--112255CCEE MM11
##3300--330000 MM11
##3300--336600 MM11,, MM22,, MM33
www.general.ca
##3300--001100 MM11
##4400--885500 MM11
13” SINGLE SURFACE PLANERFront and rear fold-down exten-
sion tables (12 L x 15 1/4 W) with
end rollers for smooth easy stock
feeding. / 2 feed speeds - 18 &
26 FPM. / Dual position depth of
cut adjustment handle mounts left
or right – one full rotation equals
1/16”. / Powerful 2 HP 15 A motor
with thermal overload protection.
PPllaanneerrss
20” SINGLESURFACE PLANER2 feed speeds - 16 & 20 FPM. / Magnetic safetyswitch. / Cast-iron base, table, and head. / Built-in mobile base with one-step lock-pedal. / Powerful 5 HPmotor.
$3199.00Reg. $3950.00
WITH NEW “MAGNUM” HELICAL CUTTER HEAD (ITEM #30300H)4 rows, total: 58 inserts
MODEL 30-300HC M1
$4499.00Reg. $6300.00
15” SINGLE SURFACE PLANER2 feed speeds - 16 & 20 FPM. / Magnetic safetyswitch. / Heavy-duty cast-ironframe reduces vibration formore precise planing. / Powerful 3 HP motor.
$1499.00Reg. $1890.00
WITH NEW “MAGNUM” HELICAL CUTTER HEAD (ITEM #125H)4 rows, total: 42 inserts
MODEL 30-115HC M1
$2899.00Reg. $3405.00
WITH NEW “MAGNUM” HELICAL CUTTER HEAD(ITEM #125H)4 rows, total: 42 inserts
MODEL 30-125CEHC M1
$3399.00Reg. $4275.00
15” SINGLE SURFACE PLANER2 feed speeds - 16 & 20 FPM. / Magnetic safetyswitch. / Triple V-belt drive for greater power. / Built-inwheels. / Powerful 3 HPmotor.
$1999.00Reg. $2760.00
LLaarrggee ccaasstt--iirroonneexxtteennssiioonn wwiinnggss
20” SINGLE SURFACE PLANER2 feed speeds - 22 & 28 FPM. / Magnetic safetyswitch. / Built-in table rollersreduce friction. / Positive geardesign for quick and accuratetable adjustments. / Powerful7 1/2 HP motor.
$4599.00Reg. $6200.00
WITH NEW “MAGNUM” HELICAL CUTTER HEAD(ITEM #360H)4 rows, total: 58 inserts
MODEL 30-360HC M1
$6100.00Reg. $8700.00
DUST COLLECTOR647 CFM (air flow). / Washable, extra fine 2 micron filterbag. / Powerful 1 HP motor.
MODEL 10-005 M1
$329.00Reg. $419.00
DUST COLLECTOR1100 CFM (air flow). / Powerful 1 1/2 HP motor.
WITH 1 MICRONCANISTER FILTER
MODEL 10-105CF M1
$649.00Reg. $865.00
MODEL 10-105 M12 micron bag filter
$479.00Reg. $575.00
DUST COLLECTOR2280 CFM (air flow). / Powerful 3 HP motor.
WITH 1 MICRONCANISTER FILTERS
MODEL 10-210CF M1
$1299.00Reg. $1855.00
MODEL 10-210 M12 micron bag filter
$999.00Reg. $1275.00
$699.00Reg. $849.00
RReeqquuiirreess aa ppoorrttaabbllee rroouutteerr aanndd bbiittss aanndd aa ccoommpprreesssseedd aaiirr ssoouurrccee tthhaatt aarree nnoott iinncclluuddeedd..
PNEUMATIC OVERARM
ROUTERSteel b
ase, arm and
stand for
smooth stable
operation. /
Adjustable pne
umatic down
feed control. /
Foot pedal
activated pneu
matic feed. / Si
x
(6) adjustable d
epth settings. /
Includes 4 rou
ter adapters to
accommodate m
ost brand nam
e
1 1/2 HP to 3 1
/2 HP portable
routers.
MODEL 40-850 M1
$1259.00Reg. $1700.00
www.general.ca
++
7
##1155--000055 MM11 ##1155--221100 MM11 ##1155--222200 MM11BBeenncchh--ttoopp
mmooddeell
NEW
13” HORIZONTAL SINGLE
DRUM SANDERHeavy duty op
en steel stand.
/ Independent switches with
removable safety key for
both conveyor motor and
main motor. / 3 to 20 FPM
variable feeding speed
(conveyor belt). / Powerful
1 1/2 HP main motor.
37” HORIZONTAL DOUBLE
DRUM SANDERHeavy cast-iro
n table with
four solid jackscrews with
chain drive. / 2 magnetic
safety switches - one for
main motor and one for con-
veyor motor. / 3.7 to 14.2
FPM variable feeding speed
(conveyor belt). / Powerful
7.5 HP motor.
6” X 108” OSCILLATINGVERTICAL EDGE BELT SANDERLarge adjustable height steel fronttable tilts up to 45° for bevelled edgesanding. /Entire head moves up anddown (not the belt). / Belt speed of3250 FPM. / Powerful 2 HP motor.
DUST COLLECTORS
DUST COLLECTOR2800 CFM (air flow). / Powerful 3 HP motor.
WITH 1 MICRONCANISTER FILTER
MODEL 10-810CF M1
$2299.00Reg. $2750.00
MODEL 10-810 M12 micron bag filter
$1799.00Reg. $2200.00
OSCILLATING SPINDLE SANDERRotating & oscillating effect ensures exceptionalfinishing results. / Precision ground cast-iron tilt-ing table. / 5 interchangeable spindle assemblies:1/4”, 1/2”, 5/8”, 1 1/2”, 2” dia. with 100 grit sandpa-per. / 1720 RPM spindle speed. / Powerful 1/2 HPmotor.
$479.00Reg. $575.00
OSCILLATING SPINDLE SANDERHeavy-duty cast-iron table and base. / Heavy-duty
oil bath gearbox. / 75 oscillations per minute. /1725 RPM spindle speed. / 10 interchangeablespindles from 1/4” to 4” including 1/4”, 3/8”, 1/2”,
5/8”, 3/4”, 1”, 1 1/2”, 2”, 3” & 4”. / Powerful 1 HP motor.
MODEL 15-020 M1
$1349.00Reg. $1789.00
6” X 89” EDGEBELT SANDERSanding belt operates at anyangle from horizontal to vertical. /Graphite covered steel plate forreduced friction and extended beltlife. / Powerful 1 1/2 HP motor.
$949.00Reg. $1259.00
Variable speed conveyor belt
24” HORIZONTAL DOUBLE
DRUM SANDER - 3 HP
Two 5” diameter aluminum
drums. / High quality con-
veyor belt for long service life.
/ Magnetic safety switch. /
3 to 20 FPM variable feeding
speed (conveyor belt). /
Powerful 3 HP main motor.
DUST COLLECTION FIREPROTECTION CAGEAll steel construction – 100% non flamma-ble. / Self-standing design sets up on anyflat sturdy surface and does not need to bepermanently attached to walls or floor.
ITEM 10-430
$1319.00Reg. $2500.00
A quick economical solution to most local safety codes
TWO MACHINE HOOK-UP KIT
ITEM 10-200
$110.00
SINGLE MACHINE HOOK-UP KIT• (2) 4” wire bail hose clamps.• (1) 4” universal dust hood outlet.• (1) 4” x 10’ polyethylene flexible hose.• (3) Heavy-duty clear plastic collector bags.ITEM 10-100
$59.00• (10) 4” wire bail hose clamps.• (1) 4” universal dust hood outlet.• (2) 4” x 10’ polye-thylene flexible hose.
• (6) Heavy-duty clear plastic collector bags.• (1) Table saw dust hood• (2) 4” blast gates• (1) 4” Y fitting.
$2649.00Reg. $3900.00
MODEL 15-250 M1
$2199.00Reg. $2900.00
MODEL 15-275 M1
$5599.00Reg. $7200.00
MODEL 15-155 M1
$1159.00Reg. $1500.00
NEW
FFlloooorr mmooddeell
SSaannddeerrss
13 SPINDLE BORINGMACHINEFully adjustable fencesystem. / Heavy-duty cast-iron construction,machined with precision./ Open base steel standincluded. / Powerful 1 1/2 HP motor.MODEL 75-440 M1
$1729.00Reg. $2000.00
8
# 80-200L M1
# 80-100L M1
# 80-075L M1
## 4400--330000
## 77 55--003300
## 7755--115500
44 66 11//22””
66 22 ””
www.general.ca
1 1/4” SPINDLE VARIABLE SPEED SHAPERExtra large heavy cast-iron table with surface ground finish. / Electronic inverter enablesoperation at any speed between 3000 and 10 000RPM. / Forward and reverse spindle rotation. / Elec-tric brake from inverter for rapid stop. / Magneticstarter with thermal overload protection. / Powerful 3 HP motor.
• Large surface, ground cast-iron tables.• Heavy-duty, three-knife cutter head.• Jackscrew system for quick, easy knife adjustment.• Independent in-feed and out-feed table adjustment hand wheels.• 5000 RPM (cutter head speed).• Powerful 1 HP motor.
6” JOINTER
• Large surface, groundcast-iron tables.• Independent in-feed & out-feed table adjust-ment hand wheels.
• Magnetic switch foradded safety.• 5500 RPM (cutter head speed).• Powerful 2 HP motor.
$1599.00Reg. $2280.00
8” DELUXE JOINTER
• Large surface, ground cast-iron tables.• Cast-iron fence with 90° & 45° positive stops.• Independent in-feed and out-feed table ad-justment hand wheels.
• Jackscrew system for quick, easy knife adjustment.• 4800 RPM (cutter head speed).• Powerful 1 HP motor.
Extra long55 1/4” tables
WITH NEW “MAGNUM”HELICAL CUTTER HEAD(ITEM #100H)4 rows, total: 16 inserts
MODEL 80-100LHC M1
$1159.00Reg. $1600.00
WITH “BYRD” STYLE HELICAL CUTTER HEAD(ITEM #200HB)4 rows, total: 22 inserts
MODEL 80-200LHC M1
$2290.00Reg. $3130.00
$739.00Reg. $990.00
Extra long 75” tables
Extra long58 1/8” tables
14” DRILL PRESSESWITH REG. 5/8” CHUCKRotating, 45° tilting, crank-operated worktable withquick release clamp. /Safety switch & adjustablespindle tension returnspring. / 12 spindle speeds(280 to 3000 RPM). / Industrial 1/2 HP motor.
MODEL 75-030 M1
$309.00Reg. $375.00
17” DRILL PRESSWITH REG. 5/8” CHUCKRotating, 45° tilting, crank-operated worktable with quick release clamp. / Safety switch &adjustable spindle tension returnspring. / 12 spindle speeds (340to 2800 RPM). / Industrial 3/4 HP motor.
MODEL 75-200RC M1
$499.00Reg. $730.00
15” DRILL PRESSWITH REG. 1/2” CHUCKWITH THREADED COLLAR4 1/2” Spindle travel. / 6 speeds(460 to 4910 RPM). / Head raises and lowers on the column./ Powerful 3/4 HP motor.
MODEL 34-01-M1
$1899.00Reg. $2320.00
Made inCanada
MORTISING ATTACHMENTKIT
ITEM 70-905
$99.00
3/4” SPINDLEWOOD SHAPER1/4” & 1/2” router bit adapters included. / Two spindle speeds (8000 & 10,000 RPM) with reverse. /Magnetic starter with thermal overload protec-tion. / Powerful 3 HP motor.
MODEL 40-250 M1
$1549.00Reg. $2115.00
1 1/4” SPINDLE 4-SPEEDPRODUCTION SHAPERFour (4) spindle speeds with reverse (4000,6000, 8000 & 10,000 RPM). / Magneticswitch with thermal overload protection. /Powerful 5 HP motor.
MODEL 40-350 M1
$3449.00Reg. $4200.00
$3599.00Reg. $4750.00
$599.00Reg. $840.00
6” JOINTER
SShhaappeerrss
DDrriillll pprreesssseess
BBeenncchh--ttoopp mmooddeell
FFlloooorr mmooddeell
MODEL 75-150 M1
$335.00Reg. $400.00