Post on 31-Jan-2018
Type Series Booklet1220.5-10 G3 Etanorm SYA
General Member ofDIN EN ISO 9001
Thermal Oil /Hot Water Pumps
Fields of ApplicationEtanorm SYA pumps are used in heat transfer systems(DIN 4754) or in hot water circulation systems.
Operating DataThermal oil Hot water
QH
up to 660 m3/h, 183 l/sup to 102 m
t -30 C up to +350 °C up to +180 °Cp2
1) up to 16 bar1) see pressure/temperature limits, page 5
DesignHorizontal volute casing pump, single-stage, with ratings andmain dimensions to EN 733, with bearing bracket, in backpull-out design.Volute casing and impeller with replaceable wear rings.Volute casing with integrally cast pump feet.
BearingsCoupling side: grease-lubricated deep-groove ball bearingImpeller side: product-lubricated carbon bearing
Shaft SealMechanical seal to DIN 24960
MaterialsVolute casing Nodular cast iron JS1025 2)
Discharge cover Nodular cast iron JS1025 2)
Shaft Chrome steel 1.4021.05 HRC 55Impeller Grey cast iron JL1040 3)
Casing wear rings Grey cast iron GGBearing bracket Nodular cast iron JS1025 2)
2) to EN 1563: GJS-400-18-LT3) to EN 1561: GJL-250
DesignationEN 80 - 160 66 (6239) S Y A
Type series EtanormPump size, e.g.Actual impeller diameter - 100 mm,e.g. 166 mm =(impellers with inclined cut back vane tips, e.g.Etanorm 80-160 actual diameter 162/139 mm)=Casing material nodular cast iron JS1025 2)
Thermal oil/Hot water variant
AccessoriesDrive 4)
Surface-cooled KSB-IEC three-phase squirrel cage motorWinding: up to 2.2 kW 220-240 V/380-420 V
for 3 kW and above 380-420 V/660-725 VDesign: IM B3Enclosure: IP 55Thermal class: F with temperature sensors: 3 PTC
thermistorsOperating mode: continuous operation S1orsurface-cooled three-phase squirrel cage motor as describedabove, but West European brand to KSB’s choice.CouplingFlexible coupling with/without spacer sleeveContact guardCoupling guard as per EN 294.BaseplateSectional steel / folded steel plate for the complete unit (pumpand motor) in torsion-resistant design4) If the electric motor is supplied by the customer, the cooling air must flow
in axial direction towards the pump side!Air velocity ≥ 3 m/s, measured at the drive-end bearing end plate
1) Ergänzungsgrößen in EN 733 nicht enthalten1) Supplementary sizes not included in EN 7331) Les tailles complémentaires ne sont pas couvertes par EN 733
1) Grandezze supplementari non incluse in EN 7331) Aanuullende grootten niet in EN 733 inbegrepen
1) Tamaños suplementarios no incluídos en EN 733
Etan
orm
SYA
2 n=
29001/m
in
1215:4054/3
1) Ergänzungsgrößen in EN 733 nicht enthalten1) Supplementary sizes not included in EN 7331) Les tailles complémentaires ne sont pas couvertes par EN 733
1) Grandezze supplementari non incluse in EN 7331) Aanuullende grootten niet in EN 733 inbegrepen
1) Tamaños suplementarios no incluídos en EN 733
Etan
orm
SYA3
n=
14501/m
in
Connecting dimen-sions and power rat-ings to EN 733
Casing wear ringsservice-friendly, nowear on the casing/impeller
Impeller with optimizedhydraulics, excellent effi-ciencies
Back pull-out design:easy dismantling, thecasing may remain inthe pipeline when thepump is dismantled
Hydraulically balancedimpellers, little axialthrust on the shaft bear-ings, long service life
Product-lubricated anti-seizecarbon bearing, high operatingreliability
Support footrigid and firm, even in caseof high external loads theshaft is only slightly dis-placed in the coupling area.
Reliable standardizedmechanical seal,maintenance-free
Robust deep-grooveball bearing, grease-lubricated, for a longservice life
No cooling water required,long cooling-down distances,large cooling fins
Long distance betweenbearings, low bearing loadsand operating temperatures,long bearing life
Pressure boundary designedfor 16 bar, made of nodularcast iron
Etanorm SYA
4
Benefits at a glance
Etanorm SYA
5
Medium handled Application limits 1) MaterialsCasing/Impeller
Shaft sealMechanical seal
Reference code Notes
Nodular cast iron /Grey cast iron
AQ1VGG
S 8
Hot water 2) t ≤ +180 Cp ≤ 16 bar
x x SYA 8
Thermal oil onmineral oil basis
t ≤ -30 up to +350 Cp ≤ 16 bar
x x SYA 8
Thermal oil 3) onsynthetic basis
t ≤ -30 up to +350 Cp ≤ 16 bar
x x SYA 8
1) Inlet pressure must not fall below atmospheric pressure.2) Low-salt or fully desalinated water to VdTÜV-specification/AGFW-specification TCN 1466 (VdTÜV) 5/15 (AGFW) edition 02.893) Pumps not suitable for handling synthetic heat transfer media of the diphenyl group
Pressure and Temperature LimitsEtanorm SYA Product temperature Inlet pressure p1 ≥ 1 bar Discharge pressure p2
4)
Thermal oil -30 up to +350 C up to 10 bar up to 16 bar
Hot water up to +180 C up to 12 bar 5) up to 16 bar
4) The sum of inlet pressure and head at zero flow point must not exceed 16 bar or the values given in the diagram.5) Etanorm SYA 150-315 and 150-400: up to 10 bar
Pressure/temperature diagram for flanges to EN 1092-2
M
Etanorm SYA
6
Etanorm SYA 32-125.1 -- 40-200
Tolerances of connecting dimensions as per EN 735
mmEtanorm
SYAIP 55
SYA 2900 1450
1/minkW DN1 DN2 a b1 b2 b3 f h1 h2 i l1 l2 l3 l1 l2 l3 x
32-125.1 0.550.751.11.52.2
--0.55
------
71808090 S90 L
5050505050
3232323232
8080808080
450450450450450
240240240240240
300300300300300
360360360360360
212212212212212
140140140140140
100100100100100
860860860860950
650650650650740
710710710710800
9509509509501050
740740740740840
800800800800900
100100100100100
32-160.1 --1.52.23.0
0.55------
8090 S90 L
100 L
50505050
32323232
80808080
450450450450
240240240240
300300300300
360360360360
232232232232
160160160160
100100100100
8608609501050
650650740840
710710800900
95095010501150
740740840940
8008009001000
100100100100
32-200.1 ----
3.04.05.5
0.550.75
------
8080
100 L112 M132 S
5050505050
3232323232
8080808080
450450450450450
240240240240240
300300300300300
360360360360360
260260260260260
180180180180180
100100100100100
860860105010501050
650650840840840
710710900900900
950950115011501150
740740940940940
800800100010001000
100100100100100
32-160 --2.23.04.0
0.55------
8090 L
100 L112 M
50505050
32323232
80808080
450450450450
240240240240
300300300300
360360360360
232232232232
160160160160
100100100100
86095010501050
650740840840
710800900900
950105011501150
740840940940
80090010001000
100100100100
32-200 ------
4.05.57.511.0
0.550.751.1--------
808090 S
112 M132 S132 S160 M
50505050505050
32323232323232
80808080808080
450450450450450450500
240240240240240240280
300300300300300300350
360360360360360360360
260260260260260260260
180180180180180180180
100100100100100100100
8608608601050105010501270
6506506508408408401060
7107107109009009001120
9509509501150115011501270
7407407409409409401060
8008008001000100010001120
100100100100100100100
32-250 ------
7.511.015.0
1.11.52.2------
90 S90 L
100 L132 S160 M160 M
505050505050
323232323232
100100100100100100
500500500500500500
280280280280280280
350350350350350350
360360360360360360
280280280280280280
225225225225225225
112112112112112112
105010501050105012701270
84084084084010601060
90090090090011201120
105010501050115012701270
84084084094010601060
900900900100011201120
100100100100100100
40-160 ------
3.04.05.57.5
0.550.751.1--------
808090 S
100 L112 M132 S132 S
65656565656565
40404040404040
80808080808080
450450450450450450450
240240240240240240240
300300300300300300300
360360360360360360360
232232232232232232232
160160160160160160160
100100100100100100100
8608608601050105010501050
650650650840840840840
710710710900900900900
9509509501150115011501150
740740740940940940940
8008008001000100010001000
100100100100100100100
40-200 ------
5.57.511.0
0.751.11.5------
8090 S90 L
132 S132 S160 M
656565656565
404040404040
100100100100100100
450450450450450500
240240240240240280
300300300300300350
360360360360360360
260260260260260260
180180180180180180
100100100100100100
860860950105010501270
6506507408408401060
7107108009009001120
9509501050115011501270
7407408409409401060
800800900100010001120
100100100100100100
DN = EN 1092-2/DN.../PN 16/21/JS1025/B
M
Etanorm SYA
7
Etanorm SYA 40-250 -- 65-200
Tolerances of connecting dimensions as per EN 735mm
EtanormSYA
IP 55ta oSYA 2900 1450
1/minkW DN1 DN2 a b1 b2 b3 f h1 h2 i l1 l2 l3 l1 l2 l3 x
40-250 --------
11.015.018.522.0
1.11.52.23.0--------
90 S90 L
100 L100 L160 M160 M160 L180 M
6565656565656565
4040404040404040
100100100100100100100100
500500500500500500500550
280280280280280280280320
350350350350350350350400
360360360360360360360360
280280280280280280280290
225225225225225225225225
112112112112112112112112
10501050105010501270127012701400
8408408408401060106010601190
9009009009001120112011201250
10501050105010501270127014001400
8408408408401060106011901190
9009009009001120112012501250
100100100100100100100100
40-315 --------
2.23.04.05.5
100 L100 L112 M132 S
65656565
40404040
125125125125
500500500500
280280280280
350350350350
470470470470
325325325325
250250250250
112112112112
1050105011501150
840840940940
90090010001000
1150115012701270
94094010601060
1000100011201120
100100100100
50-160 ------
5.57.511.0
0.751.11.5------
8090 S90 L
132 S132 S160 M
656565656565
505050505050
100100100100100100
450450450450450500
240240240240240280
300300300300300350
360360360360360360
260260260260260260
180180180180180180
100100100100100100
860860950105010501270
6506507408408401060
7107108009009001120
9509501050115011501270
7407408409409401060
800800900100010001120
100100100100100100
50-200 ------
11.015.018.522.0
1.52.23.0--------
90 L100 L100 L160 M160 M160 L180 M
65656565656565
50505050505050
100100100100100100100
450450450500500500550
240240240280280280320
300300300350350350400
360360360360360360360
260260260260260260290
200200200200200200200
100100100100100100100
950105010501270127012701400
7408408401060106010601190
8009009001120112011201250
1050115011501270127014001400
8409409401060106011901190
900100010001120112012501250
100100100100100100100
50-250 ------
15.018.522.030.0
2.23.04.0--------
100 L100 L112 M160 M160 L180 M200 L
65656565656565
50505050505050
100100100100100100100
500500500500500550550
280280280280280320320
350350350350350400400
360360360360360360360
280280280280280290310
225225225225225225225
112112112112112112112
1050105010501270127014001400
8408408401060106011901190
9009009001120112012501250
1050105010501270140014001400
8408408401060119011901190
9009009001120125012501250
100100100100100100100
50-315 --------
3.04.05.57.5
100 L112 M132 S132 M
65656565
50505050
125125125125
500500500500
280280280280
350350350350
470470470470
325325325325
280280280280
112112112112
1050115011501270
8409409401060
900100010001120
1150127012701270
940106010601060
1000112011201120
100100100100
65-160 ------
7.511.015.0
1.11.52.2------
90 S90 L
100 L132 S160 M160 M
808080808080
656565656565
100100100100100100
450450450450500500
240240240240280280
300300300300350350
360360360360360360
260260260260260260
200200200200200200
112112112112112112
8609501050105012701270
65074084084010601060
71080090090011201120
95010501150115012701270
74084094094010601060
8009001000100011201120
100100100100100100
65-200 ------
15.018.522.030.0
2.23.04.0--------
100 L100 L112 M160 M160 L180 M200 L
80808080808080
65656565656565
100100100100100100100
500500500500500550550
280280280280280320320
350350350350350400400
360360360360360360360
280280280280280290310
225225225225225225225
112112112112112112112
1050105010501270127014001400
8408408401060106011901190
9009009001120112012501250
1150115011501400140014001400
9409409401190119011901190
1000100010001250125012501250
140140140140140140140
DN = EN 1092-2/DN.../PN 16/21/JS1025/B
Fig. A
Fig. B
M
Etanorm SYA
8
Etanorm SYA 65-250 -- 80-315
Tolerances of connecting dimensions as per EN 735mm
EtanormSYA
IP 55 Fig.EtanormSYA 2900 1450
1/minkW DN1 DN2 a b1 b2 b3 f h1 h2 i l1 l2 l3 l1 l2 l3 x
65-250 ------
22.030.037.045.0
3.04.05.5--------
100 L112 M132 S180 M200 L200 L225 M
AAAAAAA
80808080808080
65656565656565
100100100100100100100
550550550550550550750
320320320320320320550
400400400400400400590
470470470470470470470
310310310310310310365
250250250250250250250
130130130130130130130
1150115011501400140014001550
940940940119011901190940
1000100010001250125012501400
1400140014001570157015701550
119011901190136013601360940
1250125012501420142014201400
140140140140140140140
65-315 ------
5.57.511.0
132 S132 M160 M
AAA
808080
656565
125125125
550550550
320320320
400400400
470470470
335335335
280280280
130130130
115011501400
9409401190
100010001250
140014001570
119011901360
125012501420
140140140
80-160 ------
15.018.522.030.0
1.52.23.0--------
90 L100 L100 L160 M160 L180 M200 L
AAAAAAA
100100100100100100100
80808080808080
125125125125125125125
500500500500500550550
280280280280280320320
350350350350350400400
360360360360360360360
280280280280280290310
225225225225225225225
112112112112112112112
1050105010501270127014001400
840840840
1060106011901190
9009009001120112012501250
1050115011501400140014001400
8409409401190119011901190
900100010001250125012501250
140140140140140140140
80-200 --------
18.522.030.037.045.0
2.23.04.05.5----------
100 L100 L112 M132 S160 L180 M200 L200 L225 M
AAAAAAAAB
100100100100100100100100100
808080808080808080
125125125125125125125125125
500500500500550550550550750
280280280280320320320320550
350350350350400400400400590
470470470470470470470470470
280280280280290290310310365
250250250250250250250250250
112112112112112112112112112
115011501150115014001400140014001550
9409409409401190119011901190940
100010001000100012501250125012501400
127012701270127015701570157015701550
10601060106010601360136013601360940
112011201120112014201420142014201400
140140140140140140140140140
80-250 --------
30.037.045.055.075.0
4.05.57.511.0
--------
112 M132 S132 M160 M200 L200 L225 M250 M280 S
AAAAAABBB
100100100100100100100100100
808080808080808080
125125125125125125125125125
550550550550550550750810880
320320320320320320550600670
400400400400400400590650720
470470470470470470470470470
310310310310310310365390420
280280280280280280280280280
130130130130130130130130130
115011501150140014001400155017501750
940940940119011901190940
10601060
100010001000125012501250140016001600
140014001400157015701570155017501750
119011901190136013601360940
10601060
125012501250142014201420140016001600
140140140140140140140140140
80-315 --------
7.511.015.018.5
132 M160 M160 L180 M
AAAA
100100100100
80808080
125125125125
550550550550
320320320320
400400400400
470470470470
360360360360
315315315315
130130130130
1150140014001400
940119011901190
1000125012501250
1400157015701570
1190136013601360
1250142014201420
140140140140
DN = EN 1092-2/DN.../PN 16/21/JS1025/B
Fig. A
Fig. B
M
Etanorm SYA
9
Etanorm SYA 100-160 -- 125-250
Tolerances of connecting dimensions as per EN 735
mmEtanorm IP 55 Fig.Etanorm
SYA 2900 1450
1/minkW DN1 DN2 a b1 b2 b3 f h1 h2 i l1 l2 l3 l1 l2 l3 x
100-160 ----
22.030.037.0
3.04.0------
100 L112 M180 M200 L200 L
AAAAA
125125125125125
100100100100100
125125125125125
550550550550550
320320320320320
400400400400400
470470470470470
310310310310310
280280280280280
130130130130130
11501150140014001400
940940119011901190
10001000125012501250
14001400157015701570
11901190136013601360
12501250142014201420
140140140140140
100-200 ------
30.037.045.055.075.0
4.05.57.5----------
112 M132 S132 M200 L200 L225 M250 M280 S
AAAAABBB
125125125125125125125125
100100100100100100100100
125125125125125125125125
550550550550550750810880
320320320320320550600670
400400400400400590650720
470470470470470470470470
310310310310310365390420
280280280280280280280280
130130130130130130130130
11501150115014001400155017501750
9409409401190119094010601060
10001000100012501250140016001600
14001400140015701570155017501750
1190119011901360136094010601060
12501250125014201420140016001600
140140140140140140140140
100-250 ------
55.075.090.0
7.511.015.0
------
132 M160 M160 L250 M280 S280 M
AAABBB
125125125125125125
100100100100100100
140140140140140140
550550550810880880
320320320600670670
400400400650720720
470470470470470470
335335335390420420
280280280280280280
130130130130130130
115014001400175017501750
94011901190106010601060
100012501250160016001600
140015701570175017501750
119013601360106010601060
125014201420160016001600
140140140140140140
100-315 --------
15.018.522.030.0
160 L180 M180 L200 L
AAAB
125125125125
100100100100
140140140140
550550550750
320320320550
400400400590
470470470470
360360360390
315315315315
130130130130
1400140014001550
119011901190940
1250125012501400
1570157015701550
136013601360940
1420142014201400
140140140140
125-200 ------
55.075.090.0110.0
7.511.015.0
--------
132 M160 M160 L250 M280 S280 M315 S
AAABBBB
150150150150150150150
125125125125125125125
140140140140140140140
550550550810880880940
320320320600670670730
400400400650720720780
470470470470470470470
360360360390420420455
315315315315315315315
130130130130130130130
1150140014001750175017501800
940119011901060106010601100
1000125012501600160016001650
1400157015701750175017501800
1190136013601060106010601100
1250142014201600160016001650
140140140140140140140
125-250 ------
11.015.018.5
160 M160 L180 M
AAA
150150150
125125125
140140140
550550550
320320320
400400400
470470470
360360360
355355355
130130130
140014001400
119011901190
125012501250
157015701570
136013601360
142014201420
140140140
DN = EN 1092-2/DN.../PN 16/21/JS1025/B
M
Etanorm SYA
10
Etanorm SYA 125-315 -- 150-400.1
Tolerances of connecting dimensions as per EN 735
mmEtanorm
SYAIP 55ta o
SYA 2900 1450
1/minkW DN1 DN2 a b1 b2 b3 f h1 h2 i l1 l2 l3 l1 l2 l3 x
125-315 --------
18.522.030.037.0
180 M180 L200 L225 S
150150150150
125125125125
140140140140
810810810810
600600600600
650650650650
530530530530
420420420420
355355355355
112112112112
1750175017501750
1060106010601060
1600160016001600
1750175017501750
1060106010601060
1600160016001600
140140140140
125-400 ----------
30.037.045.055.075.0
200 L225 S225 M250 M280 S
150150150150150
125125125125125
140140140140140
810810810810880
600600600600670
650650650650720
530530530530530
455455455455455
400400400400400
112112112112112
17501750175017501750
10601060106010601060
16001600160016001600
17501750175017501750
10601060106010601060
16001600160016001600
140140140140140
150-315 --------
22.030.037.045.0
180 L200 L225 S225 M
200200200200
150150150150
160160160160
880880880880
670670670670
720720720720
530530530530
420420420420
400400400400
112112112112
1750175017501750
1060106010601060
1600160016001600
1750175017501750
1060106010601060
1600160016001600
140140140140
150-400.1 ----------
37.045.055.075.090.0
225 S225 M250 M280 S280 M
200200200200200
150150150150150
160160160160160
880880880880880
670670670670670
720720720720720
530530530530530
455455455455455
450450450450450
112112112112112
17501750175017501750
10601060106010601060
16001600160016001600
17501750175017501750
10601060106010601060
16001600160016001600
140140140140140
DN = EN 1092-2/DN.../PN 16/21/JS1025/B
Etanorm SYA
11
Etanorm SYA
1 M Druckmeßgerät-Anschluß / Pressure gauge connection / Indicateur de pression /Manomètre / Manometro / Manometer
6 B Förderflüssigkeit-Entleerung / Casing drain / Vidange du liquide pompé /Scarico del liquido convogliato / Vloeistof- aftap
6 D Förderflüssigkeit-Auffüllen und Entlüften / Filling and venting of medium handled /Remplissage et purge d’air du liquide pompé / Riempimento del liquido convog-liato spurgo dell’aria / Vloeistof vullen en ontluchten
8 B Leckflüssigkeit-Ablaß / Leakage drain / Vidange liquide de fuite /Uscita del liquido di fuga / Salida del líquido de fugas / lekvloeistof afvoer
Tolerances of connecting dimensions as per EN 735
mmEtanorm
SYA DN1 DN2 a b1 b2 b3 c d1k6 d2 f h1 h2 i l m1 m2 n1 n2 s1 s2 t u w1 M6 B
6 D8 B
32-125.132-160.132-200.1
505050
323232
808080
505050
113116128
113125137
100100100
242424
141414
360360360
112132160
140160180
232325
505050
100100100
707070
190240240
140190190
446
151518
272727
888
260260260
G 3/8G 3/8G 3/8
G 1/4G 1/4G 1/4
32-16032-20032-250
505050
323232
8080
100
505065
113132170
125141176
100100100
242424
141414
360360360
132160180
160180225
232525
505050
100100125
707095
240240320
190190250
466
151818
272727
888
260260260
G 3/8G 3/8G 3/8
G 1/4G 1/4G 1/4
40-16040-20040-25040-315
65656565
40404040
80100100125
50506565
115115165194
131131178283
100100100130
24242432
14141414
360360360470
132160180225
160180225250
23252524
50505080
100100125125
70709595
240265320345
190212250280
4666
15181818
27272735
888
10
260260260340
G 3/8G 3/8G 3/8G 3/8
G 1/4G 1/4G 1/4G 1/4
50-16050-20050-25050-315
65656565
50505050
100100100125
50506565
126145168200
147165184216
100100100130
24242432
14141414
360360360470
160160180225
180200225280
25252524
50505080
100100125125
70709595
265265320345
212212250280
6666
18181818
27272735
888
10
260260260340
G 3/8G 3/8G 3/8G 3/8
G 1/4G 1/4G 1/4G 1/4
65-16065-20065-25065-315
80808080
65656565
100100100125
65658080
130154180208
158177200229
100100130130
24243232
14141919
360360470470
160180200225
200225250280
25252424
50508080
125125160160
9595
120120
280320360400
212250280315
6666
18182020
27273535
88
1010
260260340340
G 3/8G 3/8G 3/8G 3/8
G 1/4G 1/4G 1/4G 1/4
80-16080-20080-25080-315
100100100100
80808080
125125125125
65658080
153161184220
192189210244
100130130130
24323232
14141919
360470470470
180180200250
225250280315
25242424
50808080
125125160160
9595
120120
320345400400
250280315315
6666
18181820
27353535
8101010
260340340340
G 3/8G 3/8G 3/8G 3/8
G 1/4G 1/4G 1/4G 1/4
100-160100-200100-250100-315
125125125125
100100100100
125125140140
80808080
178173190225
225213220255
130130130130
32323232
19191919
470470470470
200200225250
280280280315
24242424
80808080
160160160160
120120120120
360360400400
280280315315
6666
18181818
35353535
10101010
340340340340
G 1/2G 1/2G 1/2G 1/2
G 1/4G 1/4G 1/4G 1/4
125-200125-250125-315125-400
150150150150
125125125125
140140140140
8080
100100
195226238275
244275278306
130130160160
32324242
19192424
470470530530
250250280315
315355355400
24242525
8080110110
160160200200
120120150150
400400500500
315315400400
6666
20202020
35354545
10101212
340340370370
G 1/2G 1/2G 1/2G 1/2
G 1/4G 1/4G 1/4G 1/4
150-315150-400.1
200200
150150
160160
100100
255285
303325
160160
4242
2424
530530
280315
400450
2525
110110
200200
150150
550550
450450
66
2020
4545
1212
370370
G 1/2G 1/2
G 1/4G 1/4
DN = EN 1092-2/DN.../PN 16/21/JS1025/B ”G” = ISO 228/1
Sub
ject
tote
chni
calm
odifi
catio
ns1.
6.20
01X
BS
d/1
Sha
ftun
it
Eta
no
rmS
YA
Eta
blo
cS
Y
Eta
line
SY S
haft
1)
Impe
ller
Sup
port
foot
1)
Dee
p-gr
oove
Dis
char
geco
ver
Pla
inbe
arin
g
Bea
ring
brac
ket1
)
Bea
ring
hous
ing
2)
Bea
ring
cove
r1)
Volu
teca
sing
Mec
hani
cals
eal
Sea
lcov
er2)
Sea
lrin
gho
lder
1)
Cas
ing
wea
rrin
gsu
ctio
nsi
de
102
183
163
210
230
476
502.
2
321
330
433
310
360
502.
1
471
350
ball
bear
ing
1)
Cas
ing
wea
rrin
gdi
scha
rge
side
1
1
XSame number means same component Components differ Component not fittedO
Etanorm SYA
KSB Aktiengesellschaft67225 Frankenthal, Johann-Klein-Str. 9, 67227 Frankenthal (Germany)Tel.: (+49) 62 33/86-0 . Fax: (+49) 62 33/86-34 01 . www.ksb-industry.com
Recommended Spare Parts Stock for 2 Years’ Continuous OperationPart No. Description Number of pumps (including stand-by pumps)
2 3 4 5 6 and 7 8 and 9 10 and moreQuantity of spare parts
210230321330433502.1--
ShaftImpeller (incl. casing wear ring 502.2)Deep-groove ball bearingBearing bracket 1)
Mechanical sealCasing wear ringGasket / Joint ring (set) 2)
111--114
111--116
112--218
222--228
223--329
22413212
20 %20 %100 %2 off25 %20 %150 %
1) Bearing bracket 330, cpl., consisting of: shaft 210, plain bearing 310, deep-groove ball bearing 321, bearing bracket 330, bearing cover 360, joint ring 411.1, O-ring 412.1/.2, mechanicalseal 433, seat ring holder 476, disc 550.1/.2/.3, hex. head bolt 901.1, screwed plug 903, plug 916, hex. nut 920.3, spring washer 930, circlip 932.1/.2
2) Gasket / Joint ring (set), consisting of: gasket 400, joint ring 411.1/.3/.4
Interchangeability of Etanorm SYA, Etabloc SY, Etaline SY Components and Interchangeability of Component PartsDescription
Part No.
32-125.1 25 32-125.1/. O 1 1 1 O O 1 1 1 1 1 1 1 1 X
32-160.1 25 32-160.1/. 40-160/.. O 1 2 1 1 O 1 1 1 1 1 1 1 1 3
32-200.1 25 32-200.1/. 40-200/.. O 2 3 1 2 O 1 1 1 1 1 1 1 1 3
32-160 25 32-160/.. 50-160/.. O 1 2 1 1 O 1 1 1 1 1 1 1 1 3
32-200 25 32-200/.. 50-200/.. O 2 3 1 2 O 1 1 1 1 1 1 1 1 3
32-250 25 O 3 4 1 O 2 1 1 1 1 1 1 10
40-160 25 40-160/.. 65-160/.. O 1 2 1 O O 1 1 1 1 1 1 1 2 3
40-200 25 40-200/.. 65-200/.. O 2 3 1 O O 1 1 1 1 1 1 1 O 3
40-250 25 O 3 4 1 O 2 1 1 1 1 1 2 10
40-315 35 O O 7 2 O 3 2 2 2 2 2 2 13
50-160 25 50-160/.. 80-160/.. O 1 3 1 O O 1 1 1 1 1 1 1 3 3
50-200 25 50-200/.. 80-200/.. O 2 3 1 O O 1 1 1 1 1 1 1 3 3
50-250 25 O 3 4 1 O 2 1 1 1 1 1 3 10
50-315 35 O 7 7 2 O 3 2 2 2 2 2 4 11
65-160 25 65-160/.. 100-160/.. O 4 3 1 O O 1 1 1 1 1 1 1 4 5
65-200 25 65-200/.. O O 4 1 O O 1 1 1 1 1 1 1 4 5
65-250 35 O O 5 2 O 3 2 2 2 2 2 5 13
65-315 35 O 7 7 2 O 3 2 2 2 2 2 5 11
80-160 25 80-160/.. 100-170/.. O 4 4 1 O O 1 1 1 1 1 1 1 6 5
80-200 35 O 5 O 2 O 3 2 2 2 2 2 6 11
80-250 35 O 6 5 2 O 3 2 2 2 2 2 6 11
80-315 35 O 7 6 2 O 3 2 2 2 2 2 6 11
100-160 35 O 5 5 2 O 3 2 2 2 2 2 7 11
100-200 35 O 5 5 2 O 3 2 2 2 2 2 7 11
100-250 35 O 6 7 2 O 3 2 2 2 2 2 7 11
100-315 35 O 7 6 2 O 3 2 2 2 2 2 7 11
125-200 35 O O 6 2 O 3 2 2 2 2 2 8 O
125-250 35 O O 6 2 O 3 2 2 2 2 2 8 O
125-315 55 O 8 9 3 O 3 3 3 3 3 3 8 12
125-400 55 O 9 8 3 O 3 3 3 3 3 3 8 12
150-315 55 O 8 9 3 O 3 3 3 3 3 3 9 12
150-400.1 55 O 10 8 3 O 3 3 3 3 3 3 9 X
1) Etanorm SYA only2) Etabloc SY/Etaline SY only