Post on 22-Mar-2019
General CatalogUnlocking the full potential
of your machines
272
01
02
03
The EROWA PM tooling system was developed for use under high pres-sing forces. Depending on the field of application and on requirements, the optimal tooling system can be chosen.
Crucial advantages of the PM tooling systems:
requirements.
These factors directly aim to increase the
EROWA PM Tooling
Pressing powder systematically
01 |
02 |
03 |
273
01
06
07
08
09
0502
03
04
10
STANDARDIZATION
EROWA PM TOOLING
Function
01 | Fully sealed system; resistant to
02 | Large contact surface for great .
03 | Precise «P» centering.
04 |
05 |
06 | Fully sealed system.
07 | Precise «P» centering.
08 |
09 | Large contact surface for
10 |
Manual / Loading facility / Robot
PM
To
olin
g
274
EROWA PM Tooling System
Rapid change system for powder presses
machined on ITS system holders.
Grinding
cylindrical grinding machines.
Powder pressing
EROWA PM Tooling
Universal from milling to pressing
For more information
about the whole EROWA
PM tooling system range.
275STANDARDIZATION
EROWA PM TOOLING
PM Tooling Chucks 276
PM Tooling Pallets 278
PM Tooling Accessories 279
PM Tooling Spindle adaptation, chucks 284
PM Tooling Spindle adaptation, pallets 285
material
clearance
control unit
valve
9. Suited for automatic
PM
To
olin
g
276
Version
Connections
Version
Connections
Version
Connections
Technical data
EROWA PM Tooling Precise
Chucks
277STANDARDIZATION
EROWA PM TOOLING
Version
Multi.
Version
Connections
Version
Connections
centers. PM
To
olin
g
278
EROWA PM Tooling Precise
Pallets
1 piece
Version
1 piece
Version
1 piece
Version
8 pieces
Version
279STANDARDIZATION
EROWA PM TOOLING
EROWA PM Tooling
Accessories
Version
8 pieces
1 piece
Version
8 pieces
1 piece
Version
securing ring.
Version
Version
PM
To
olin
g
280
EROWA PM Tooling
Accessories
Please note: you can find the entire range in the EROWA PM Tooling System Catalog.
Version
Version
Version
281STANDARDIZATION
EROWA PM TOOLING
PM
To
olin
g
282
EROWA spindle adaptation
The universal interface
'
283STANDARDIZATION
EROWA PM TOOLING
essential time factor.
Manual
PM
To
olin
g
284
EROWA spindle adaptation
Chucks
Technical data
Version
Connections
machine control unit.
Version
Connections
unit or through the machine control unit.
Version
285STANDARDIZATION
EROWA PM TOOLING
EROWA spindle adaptation
Pallets
1 piece
Version
1 piece
Version
Version
insert.
PM
To
olin
g