Post on 06-Jan-2016
description
Enthalpy and FuelsUsing and Controlling Reactions
1
Energy
FuelsIndustrial P rocess
Heat Light and Sound
Galvanic cells E lectrolytic cells
E lectrical K inetic Potential
E nerg y fromC hem ica l R eactions
2
The capacity for doing work
Energy is inter-convertible between different forms
Chemical Energy
The energy from reactions comes from the breaking and forming of bonds between atoms.
When chemical bonds are formed energy is released.
When chemical bonds are broken energy is required.
This energy can be heat, light or electrical.
3
4
Heat Energy
Measurement of the heat change in chemical reactions is called calorimetry.
The heat energy involved in a chemical reaction can be observed from the temperature changes resulting from that reaction.
A calorimeter is used to measure these heat changes in chemical reactions.
5
6
Exothermic reactions
Exo: Out Thermic: Heat Releases heat energy to the
surroundings. Temperature of the surroundings
increases. Energy released when forming
bonds > Energy used to break bonds
7
Exothermic reactions
8
Heat Energy
Time
Reactants
Products
Change in Enthalpy
Exothermic
H < 0
Endothermic reactions
Endo: To take in Heat energy is taken from the
surroundings. Temperature of the surroundings
decreases. Energy required to break bonds >
Energy released when forming bonds.
9
Endothermic reactions
10
Time
Heat Energy
Reactants
Products
Change in Enthalpy
Endothermic
H > 0
11
Enthalpy
The quantity of heat released or absorbed when specific amounts of substances react is called the Heat of Reaction.
The difference in heat energy between products and reactants at constant pressure is called the Enthalpy Change.
H = Hproducts – Hreactants12
Enthalpy
The Molar Enthalpy Change for a reaction is the quantity of heat energy released or absorbed when 1.00 mole of a substance reacts in a chemical reaction under constant pressure.
Measured in kJmol-1 or kJ g-1
The quantity of heat released or absorbed is directly proportional to the number of moles of reactants and products.
13
Enthalpy
The quantity of heat energy released or absorbed can be calculated by
Heat = n x H EXAMPLE: Calculate the enthalpy
change for the neutralisation of 112.2g of KOH (H = – 56.0kJmol-1)
n = m/M = 112.2/56.1 = 2.00 moles Energy released = 2 x 56.0 = 112 kJ
released
14
Thermochemical Equations
An equation showing the enthalpy change is worth 4 marks.
Correct formulae Must be BALANCED The physical states of matter MUST
be shown. The sign MUST be included with the
H value.
15
6CO2(g) + 6H2O(l) --> C6H12O6(s) + 6O2(g) ∆H = +2800 kJ
Thermochemical Equations If the coefficients are doubled the H
value must be doubled. CH4(g)+2O2(g) → CO2(g)+2H2O(l) H = -890
kJmol-1 2CH4(g)+4O2(g) →2CO2(g)+4H2O(l) H = -1780 kJ
If the reaction is reversed then the H value is equal but opposite in sign
N2(g) + 3H2(g) → 2NH3(g) H = - 92.4 kJmol-1
2NH3(g) → N2(g) + 3H2(g) H = + 92.4 kJmol-116
Enthalpy of Combustion
The molar enthalpy of combustion of a substance is the quantity of heat energy released when 1.00 mole of a pure element or compound is burnt completely in oxygen under constant pressure.
The products are gaseous carbon dioxide and liquid water.
17
Enthalpy of Combustion
When a fuel is burnt in air rather than oxygen, the non reactive gases (N2) absorb some of the heat energy released. Lower flame temperature.
CH4(g) + 2O2(g) → CO2(g) + 2H2O(l) ΔH= -890kJ
18
Enthalpy of Solution
The molar enthalpy of solution is the quantity of heat energy released or absorbed when 1.00 mole of substance dissolves in sufficient solvent so that further dilution causes no further change in heat energy.
NH4NO3(s) + aq NH4+
(aq)+ NO3–(aq) H = +26kJ
19
Enthalpy of Neutralisation
The molar enthalpy of neutralisation is the quantity of heat energy released when 1.00 mole of hydrated hydrogen ions from an acid is neutralised by 1.00 mole of hydrated hydroxide ions from an alkali.
Heat change per mole of water formed when dilute solutions of acids and bases are mixed.
H+(aq) + OH–
(aq) H2O(l) H= –57kJ
20
Calculating Enthalpy values
n
TmcH p
1000
Experimental data can be used to calculate the enthalpy change for chemical reactions.
21
m = mass of water
cp (specific heat capacity of water) = 4.18 J g-1 oC-1
ΔT = change in temperature
n = number of moles of reactant
Assumptions
All of the heat energy produced or absorbed by the reaction is transferred to or from the known mass of water or aqueous solution in the calorimeter. No exchange of heat occurs with the calorimeter or the surrounding air.
The reaction occurs quickly enough for the max or min temperature of the liquid in the calorimeter to be reached before the liquid begins to return to room temperature.
22
23
Approximations
The specific heat capacity of any aqueous solution is taken to be the same as that for water.(i.e. 4.18 J g-1 oC-1)
The density of any aqueous solution in the calorimeter is taken to be the same as the density of water. 1mL=1g
Always read the question carefully in any test or exam and use the specific heat capacity given.
24
Fuels
Useable fuel source provides maximum energy from minimum amount of material
Chemical fuels release energy from combustion.
Carbon based Fuels can be divided into: Fossil Fuels e.g. Coal, Oil,
Natural Gas Biofuels e.g. Ethanol,
Biodiesel, Biogas 25
Advantages of Burning Fossil Fuels
High enthalpy of combustion (High energy density)
Can be burnt at point of use. i.e. Internal combustion engine, home heating etc (80% of fossil fuels are used this way)
Versatile and inexpensive. Provide governments with tax
income.26
Disadvantages of Burning Fossil Fuels
Finite reserves of coal, oil and gas. Oil and gas expected to run out before end of this century.
Burning releases CO2 which contributes to the enhanced greenhouse effect.
Other pollutants are released due to contaminants in the fuel or when incomplete combustion occurs e.g. soot, CO, SO2, NOx
27
Disadvantages of Burning Fossil Fuels
Fossil fuels are used as feedstock (raw material) for the chemical industry
Used to make synthetic fibres, solvents, paints, detergents, dyes and plastics
Burning fossil fuels for energy, reduces raw material required for these industries
28
Advantages of Burning Biofuels
Renewable, approximately Carbon neutral
Less harmful air pollutants released due to less fuel contaminants
Biodegradable Can be domestically produced
29
Disadvantages of Burning Biofuels
Non renewable fossil fuels can be used in the production of ethanol
Slightly decreases fuel economy May solidify at low temperatures Not widely available Many developing countries are
growing plants to produce biofuels rather than food crops leading to increased famine
30
31
Complete Combustion
Occurs with unlimited oxygen Products are Carbon dioxide and
water Maximum quantity of heat energy
produced when a fuel undergoes
complete combustion
32
Incomplete Combustion
Occurs if the oxygen supply is limited.
Additional products formed include carbon (Soot) and carbon monoxide.
Less heat energy is produced than complete combustion.
33
Carbon Monoxide CO
Persists in the environment for long periods of time.
Strongly bonds to haemoglobin in blood preventing it from carrying oxygen to cells.
Symptoms of CO poisoning range from visual disturbance, headaches, fatigue to unconsciousness and death dependant on concentration of Carbon monoxide.
34
Soot C
Particulate pollution. Settles on objects.
Clogs air filters/ inlets lowering efficiency of engines and burners.
Coats plant leaves reducing photosynthesis.
Damages the respiratory system and aggravates asthma, bronchitis and other lung diseases.
35
Comparing Fuels
Fuel comparisons can be made per mole, per gram or per litre of fuel.
Molar enthalpy of combustion: Energy released per mole of fuel (kJmol-1)
Energy density: Energy released per gram (kJg-1) or per litre (kJL-1) Per gram: Energy density = H/M Per Litre: Energy density(liquid fuel) =
H/M x (where = the density of the fuel in gL-1)
36