Post on 16-Feb-2021
ENERGY EFFICIENT SISTEM FOR WOOD
STERILIZATION
Miloš Marjanović, VISER, Belgrade,milosmarjanovich@gmail.com
Miša Stević, Mikroelektronika, Belgrade
Miloš Milešević, University of Belgrade, School of electricalengineering, Belgrade
Žarko Ševaljević, University of Belgrade, School of electricalengineering, Belgrade
Sanja Petronić, Inovation center of Mechanical faculty, BelgradeMarta Trninić, University of Belgrade, Mechanical faculty
Zoran Stević, University of Belgrade, School of electrical engineering, TF Bor, CIK Belgrade
mailto:milosmarjanovich@gmail.com
Appearance of the chamber with wooden material
Five PT1000 probes in the chamber, four of which are in wood and one in air
Three-phase phase regulator
Projection of coolerThree-phase phase regulator with neutral conductor
Selected coolerLaboratory setting
PID Regulation
Response projection PID management and monitoring
Тип регулатора Kp Ti Td
P 0.55(Kp)kr
PI 0.35(Kp)kr 1.25Tkr
PID 0.60(Kp)kr 0.80Tkr 0.20Tkr
LabVIEW Block Diagram
NI USB-6001
Разделник напона и појачавачи испред картице
Laboratory testing of a card with voltage divider and preamplifier
NI USB-6001
Appearance of both sides of the card Signal amplification module
Signal shape from the
temperature sensorsSignal amplification and conditioning
Control cabinet diagram
Installation of cabinets and tracking boxes
Thank you for your attention