Post on 01-Mar-2022
RM15 Electronically controlled turret - MJ12
Description
The turret RM15 is a compact turret for a varied field of applications. It can be used as front turret for an ARFF vehicle as well as main turret for an municipal vehicle. Designed for water and foam flow rates up to 2.000 l/min at 10 bar, 450 l/min at 40 bar and dry chemical flow rates up to 20 kg/s.
Benefits Flow rate ▪ 2.000 l/min at 10 bar (530 gal/min at 150 psi)
water or water-/foam ▪ 1.900 l/min at 10 bar (500 gal/min at 150 psi)
water and 1,5 kg/s (3,3 lbs/sec) powder with ChemCore nozzle
▪ 450 l/min at 40 bar (100 gpm at 600 psi) high press. ▪ 20 kg/s at 14 bar (44 lbs at 200 psi) with
dry chemical nozzle Suitable for most extinguishing agents ▪ water ▪ water-foam (non air aspirated) ▪ CAFS ▪ foam, with foam barrel (air aspirated) ▪ combined water and dry chemical with ChemCore
nozzle ▪ dry chemical Excellent throw range ▪ 70 m (230 ft) water ▪ 47 m (155 ft) foam air aspirated (with foam barrel)
Excellent foam quality ▪ meets the requirements of NFPA 414
› throw range 47 m (155 ft) › expansion ratio 5:1 › quarter drainage time 135 sec
Simple and safe operation ▪ ONE HAND OPERATION: all turret functions can
be controlled directly via joystick / control handle ▪ SPEED PROPORTIONAL CONTROL: deviation
of joystick prescribes velocity of turret movement ▪ FEED BACK CONTROL: position of the control
handle prescribes position of the turret, programmable rest- and attack position
Automatic oscillation operation ▪ turret moves along a rectangle which is freely
definable in size and position ▪ enables a fully automatic turret operation Compact turret ▪ the turret is ideally suitable as bumper turret
through it's small width of only 255 mm (10 in)
Technical data
Drive electric motors, manual emergency actuation via hand wheels
Rotation range max. 330° (depending on model)
Swivel range max. -40° up to +80° with design cover
Connection flange DN50, vertical
Nozzle o-stream nozzle normal pressure, max. flow rate 2.000 l/min at 10 bar (530 gpm at 150 psi)
o-stream nozzle high pressure, max. flow rate 450 l/min at 40 bar (100 gpm at 600 psi)
ChemCore nozzle optional, integr. comb. water-/powder nozzle, max. 1.900 l/min (500 gpm) water, 1,5 kg/s (3,3 lbs/sec) powder
Nozzle adjustment electrical infinite adjustment for full/spray jet
Flow adjustment optional, electric adjustment full flow / half flow, not available for ChemCore nozzle
Foam barrel optional fix mounted, with integrated aspiration plates for improved foam quality
optional removable, with integrated aspiration plates for improved foam quality, no deflector necessary
Deflector optional, for adjusting the jet by using the foam barrel
Dry chemical nozzle optional integrated: max. flow rate 20 kg/s (44 lbs/sec)
Electric 12 V or 24 V, standard 1 LED light 10W / 900 lm, optional 1 additional LED light 10W / 900 lm
Control electronic control via CAN-bus 2.0 with absolute position detection via potentiometer
Cameras optional, FLIR integrated in cover with o-stream nozzle, on top of cover with foam barrel and deflector
PC443 2014-10_RWeb
RM15
Text and illustrations are not binding. The illustrations may show optional extras only available at extra charge. Rosenbauer retains the right to alter specifications and dimensions given herein without prior notice.
Contact
Rosenbauer International AG Paschinger Straße 90 4060 Leonding, Austria Tel.: +43 732 6794-0 Fax: +43 732 6794-91 www.rosenbauer.com
Electronically controlled turret - MJ12
www.facebook.com/rosenbauergroup
Swivel range –40° - +80° with design cover
Turret with o-stream nozzle on panther Turret with o-stream nozzle, foam barrel and deflector
Turret with o-stream nozzle on industrial vehicle